585960
18
Verklein
Vergroot
Pagina terug
1/19
Pagina verder
LCD Digital Camera
QV-770
Owner's Manual
If you need help with
your camera, please
call: 1(800)435-7732
CASIO COMPUTER CO.,LTD.
6-2, Hon-machi 1-chome
Shibuya-ku, Tokyo 151-8543, Japan
2
QUICK REFERENCE
Be sure to use Alkaline or Lithium batteries. Never use manganese batteries.
Press down on the battery compartment cover at the point marked AA
AA
A in the above illustration until the
cover locks into place with a click.
1
Slide the battery compartment
lock on the bottom of the camera
(11
11
1), and open the battery com-
partment cover (22
22
2). Load four batteries and close the battery compart-
ment cover.
2
To load batteries (page 16)
Be sure to load four AA size batteries that come with this camera before using it.
3
QUICK REFERENCE
To Record Images (page 20)
2
3
1
4
Slide the Function
Switch to REC. Slide the POWERSwitch
to the right to turn on the
camera.
Press    button to select resolution setting you want.
Each press of    button cycles through the resolution setting in the
following sequence: (Fine)  (Normal)  (Economy).
Set the NORMAL/
MACRO switch to
  (NORMAL)
position.
Use (Macro) when
the subject is located
about 15 cm (about 6
inches ) from the lens
(see page 24).
5
Compose the image
on the monitor
screen and then
press the shutter
button.
4
QUICK REFERENCE
To Playback Images (page 33)
2
Slide the POWER Switch to the right.
The image you recorded appears on the LCD.
3
Use [+] and [–] to scroll
through the images stored
in camera memory.
1
Slide the Function
Switch to PLAY.
The camera may contain pre-recorded demonstration images
when you purchase it. To delete these images, see page 5.
5
QUICK REFERENCE
To delete images (page 54)
25
1
Slide the Function
Switch to PLAY.
Press MENU. Press the shutter button to delete
the selected image.
You can continue deleting operation.
To exit deleting operation, press MENU.
4
3
Use [+] and [–] to select DELETE,
and then press the shutter button.
Use [+] and [–] to select PAGE,
and then press the shutter button.
Use [+] and [–] to select the image
you want to delete.
Double check to
make sure that
you really want to
delete the image
you selected.
Press MENU to stop
deleting the image.
*
*
6
Resolution Settings ..................................................... 24
Exposure Adjustment .................................................. 25
27 OTHER RECORDING FUNCTIONS
Movie Recording ......................................................... 27
Serial Recording ......................................................... 28
Self-timer Recording ................................................... 29
Panorama Recording .................................................. 30
Manual Recording ...................................................... 31
33 PLAYBACK
Basic Playback Operation .......................................... 33
Playingback Movie ...................................................... 34
Panorama Playback ................................................... 35
Using Zoom ................................................................ 36
Displaying Multiple Images ......................................... 37
Auto Play .................................................................... 39
Screen Saver .............................................................. 40
42 EDITING IMAGES
Using Image Filters ..................................................... 42
Adding a Title to an Image .......................................... 43
Combining Two Images .............................................. 46
Moving an Image ........................................................ 48
Rotating an Image ...................................................... 49
51 IMAGE PROTECTION
Protecting and Unprotecting a Single Image .............. 51
Protecting and Unprotecting All Images in Memory .... 52
CONTENTS
INTRODUCTION
Congratulations upon your selection of the QV-770 LCD Digital Camera.
To get the most out of the QV-770, be sure to carefully read this manual and follow the instructions contained in it.
2QUICK REFERENCE
8FEATURES
9PRECAUTIONS
13 UNPACKING
Connecting the Wrist Strap......................................... 13
Using the Soft Case.................................................... 13
14 GENERAL GUIDE
Top and Display .......................................................... 14
Lens ............................................................................ 14
Bottom ........................................................................ 14
15 MONITOR SCREEN
Recording Mode ......................................................... 15
Playback Mode ........................................................... 15
16 POWER SUPPLY
To load batteries ......................................................... 16
Using AC Power ......................................................... 19
20 RECORDING
Basic Recording Operation ......................................... 20
Shooting Images Outdoors ......................................... 21
Using the Flash ........................................................... 22
Changing the Lens Orientation ................................... 23
NORMAL/MACRO Switch .......................................... 24
7
CONTENTS
54 DELETING IMAGES
Deleting a Single Image ............................................. 54
Deleting All Unprotected Images ................................ 56
57 CHANGING IMAGE RESOLUTION
58 CONNECTIONS
VIDEO OUT Sockets .................................................. 58
DIGITAL Interface ....................................................... 59
60 CONNECTING TO OTHER EQUIPMENT
Connecting to a Television.......................................... 60
Connecting to a QV Color Printer ............................... 61
Connecting to another CASIO QV Digital Camera ..... 62
PC Link Software ........................................................ 64
65 INFRARED DATA TRANSFER
Receiving Data ........................................................... 65
Sending Data .............................................................. 66
Transferring images using PC Link Software ............. 69
71 TROUBLESHOOTING
74 MESSAGES
75 SPECIFICATIONS
CASIO COMPUTER CO., LTD. assumes no responsibility
for any damage or loss resulting from the use of this
manual.
CASIO COMPUTER CO., LTD. assumes no responsibility
for any loss or claims by third parties which may arise
through the use of the QV-770.
CASIO COMPUTER CO., LTD. assumes no responsibility
for any damage or loss caused by deletion of data as a
result of malfunction, repairs, or battery replacement. Be
sure to back up all important data on other media to protect
against its loss.
Windows is a registered trademark of Microsoft Corpora-
tion.
Macintosh is a registered trademark of Apple Computer,
Inc.
IrDA communications use Phoenix Technologies protocol
software.
Compatibility Software Copyright c 1997
Phoenix Technologies Ltd., All Rights Reserved.
8
MATTERHORN
Compact, lightweight design
A built-in monitor provides the ultimate in go-along-any-
where portability.
FEATURES
Powerful display functions, including
movies and panoramas!
Record and play back movies that are about 3.2 seconds
long and panoramas that link multiple images together.
Multi-page shows multiple images on a single screen, Close-
up lets you zoom in close for more detail, Auto Playback,
automatically show a series of images.
On-the-spot viewing of recorded images
A high-resolution TFT LCD screen produces low-glare im-
ages even under bright light.
Multiple interfaces, including an infrared
data port (IrTran-P)
VIDEO OUT lets you output images to a TV for big-screen
presentations. A DIGITAL port lets you transfer image data
to a computer for storage and editing. Data can be trans-
ferred back to the camera when you need it. A new infrared
data port enables quick and easy data communication with
another device equipped with infrared communication capa-
bilities.
IrTran-P protocol compatible digital device
9
PRECAUTIONS
General Precautions
Be sure to observe the following important precautions
whenever using the QV-770.
All references in this manual to “this camera” and “the cam-
era” refer to the CASIO QV-770 Digital Camera.
Never try to take pictures or use the built-in display while
operating a motor vehicle or while walking. Doing so cre-
ates the danger of serious accident.
Never try to open the case of the camera or attempt your
own repairs. High-voltage internal components create the
risk of electrical shock when exposed. Always leave main-
tenance and repair work up to authorized CASIO service
providers.
Never fire the flash in the direction of a person operating a
motor vehicle. Doing so can interfere with the driver’s vi-
sion and create the danger of accident.
Never fire the flash while it is too close to the subject’s
eyes. Be especially careful with small children. Intense
light from the flash can cause eye damage if it is fired too
close to the eyes, especially with young children. When
using the flash, the camera should be at least one meter
(3.3') from the eyes of the subject.
Keep the camera away from water and other liquids, and
never let it get wet. Moisture creates the danger of fire and
electrical shock. Never use the camera outdoors in the rain
or snow, at the seashore or beach, in the bathroom, etc.
Should foreign matter or water ever get into the unit, imme-
diately turn power off, unplug the AC adaptor from the
power outlet, and contact your dealer or nearest CASIO
service provider. Using the unit under these conditions cre-
ates the danger of fire and electrical shock.
Should you ever notice smoke or a strange odor coming
out of the unit, immediately turn power off and unplug the
AC adaptor from the power outlet. Using the unit under
these conditions creates the danger of fire and electrical
shock. After making sure there is no more smoke coming
from the unit, take it to your nearest CASIO service pro-
vider for repair. Never attempt your own maintenance.
If the unit’s case should ever become cracked due to drop-
ping it or otherwise subjecting it to rough treatment, imme-
diately turn power off, unplug the AC adaptor from the
power outlet, and contact your nearest CASIO service pro-
vider.
Never use the unit inside of an air craft or in any other ar-
eas where its use is prohibited. Doing so can result in an
accident.
Physical damage and malfunction of this unit can cause
the image data stored in its memory to be deleted. Be sure
to always keep backup copies of data by transferring them
to personal computer memory.
Never open the battery compartment cover, disconnect the
AC adaptor from the camera or unplug it from the wall
socket while the “WAIT” message is on the LCD. Doing so
will not only make storage of the current image impossible,
it can also corrupt other image data already stored in cam-
era memory. 10
PRECAUTIONS
Operating conditions
This camera is designed for use in temperatures ranging
from 0°C to 40°C (32°F to 104°F).
Do not use or keep the camera in the following areas.
In areas subject to direct sunlight
In areas subject to high humidity or dust
Near air conditioners, heaters, or other areas subject to
temperature extremes
Inside of a closed vehicle, especially one parked in the
sun
In areas subject to strong vibration
Condensation
When you bring the camera indoors on a cold day or other-
wise expose it to a sudden change of temperature, there is
the possibility that condensation can form on the exterior or
on interior components. Condensation can cause malfunc-
tion of the camera, so you should avoid exposing it to con-
ditions that might cause condensation.
To keep condensation from forming, place the camera into
a plastic bag before moving it into a location that is much
warmer or colder than your current location. Leave it in the
plastic bag until the air inside the bag has a chance to
reach the same temperature as the new location. If con-
densation does form, remove the batteries from the cam-
era and leave the battery compartment cover open for a
few hours.
Battery Life Notes
The battery life figures noted in the specifications of this
Owner’s Manual indicate the number of hours before bat-
tery failure under normal operating temperatures (25°C).
They do not guarantee that batteries will perform for any
amount of time.
The actual number of hours of service provided by batter-
ies varies widely depending upon manufacturer, battery
age, and temperature.
Long term continued use of the camera can cause the low
battery indicator to appear sooner than expected. Be sure
to turn off power whenever the camera is not being used.
Appearance of the low battery indicator means that batter-
ies are about to go dead. Be sure to replace all four batter-
ies a fresh set of new ones as soon as possible. Leaving
dead batteries in the camera creates the danger of leaking
batter fluid and corruption of stored image data.
11
PRECAUTIONS
About the camera’s backlight…
The camera is equipped with a fluorescent light source to
provide the back lighting for its LCD.
The normal service life of the backlight is approximately six
years, when the camera is used for about two hours a day.
Should the LCD image appear abnormally dark, take the
camera to your dealer or an authorized CASIO service pro-
vider to have the light source replaced. Note that you will
be charged for this replacement.
Under very cold conditions, the backlight may require more
time than normal to light, or reddish bands may appear in
the image. These conditions do not indicate malfunction,
and normal operation should return at higher temperatures.
12
QV-770
Declaration of Conformity
Model Number: QV-770
Trade Name: CASIO COMPUTER CO.,LTD.
Responsible party: CASIO INC.
Address: 570 MT. PLEASANT AVENUE,
DOVER,NEW JERSEY 07801
Telephone number: 973-361-5400
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, in-
cluding interference that may cause undesired operation.
CASIO COMPUTER CO.,LTD.
Tested To Comply
With FCC Standards
FOR HOME OR OFFICE USE
PRECAUTIONS
GUIDELINES LAID DOWN BY FCC RULES FOR USE OF
THIS UNIT IN THE U.S.A. (not applicable to other areas).
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful in-
terference, and (2) this device must accept any interference received, in-
cluding interference that may cause undesired operation.
NOTICE
This equipment has been tested and found to comply with the limits for
a Class B peripheral, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interfer-
ence to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC WARNING
Changes or modifications not expressly approved by the party respon-
sible for compliance could void the user's authority to operate the
equipment.
Properly shielded cables with ferrite core must be used for connection
to host computer and/or peripherals in order to meet FCC emission
limits.
THE SPECIAL VIDEO CABLE THAT COMES WITH THE CAMERA
----- THE CAMERA TO A VIDEO IN TERMINAL OF A COMPUTER
THE SPECIAL CONNECTION CABLE THAT COMES WITH QV-Link SOFTWARE
----- THE CAMERA TO A PROPER TERMINAL OF A COMPUTER
13
UNPACKING
Check to make sure that all of the items shown below are
included with your camera. If something is missing, contact
your dealer as soon as possible.
Wrist Strap
Manual
Camera
Soft case
Alkaline batteries
(AA-size
×
4)
Connecting the Wrist Strap
Pass the wrist strap through the hole on the side of the cam-
era as shown in the illustration.
IMPORTANT!
Be sure to keep the wrist strap around your wrist when-
ever using the camera to protect against accidentally
dropping it.
Using the Soft Case
Keep the camera in its soft case to protect it when not in use.
Slide the stopper and close the soft case as shown in the
illustration.
Video cable
Stopper
14
L M N
21
7 9
0 A
86
3
4
5
1
2
3
4
5
6
7
8
9
0
A
B
C
D
E
F
G
H
I
J
K
GENERAL GUIDE
Shutter button
VIDEO OUT terminal
AC Power terminal
DIGITAL terminal
Terminal panel cover
FLASH
Infrared port
Exposure sensor
Lens switch
Tripod hole
Battery compartment
cover
Battery compartment
lock
L
M
N
LensTop and Display
Bottom Opening the Terminal Panel Cover
BC E G
D F
I K
JH
IMPORTANT!
As shown in Figure 1 above, pull the connector cover
out as far as it will go and then lift up to open it. Never
force the cover. Doing so can damage it.
LCD
DISP button
MENU button
[–]
[+]
Charge lamp
button
button
MODE button
FUNCTION switch
POWER switch
The following illustrations show the names of each component, button and switch on the camera.
15
はじめに
MONITOR SCREEN
Pressing DISP during recording and playback changes the
information shown on the monitor screen.
The display area of the image shown on the monitor screen
is slightly smaller than the actual full image.
Recording Mode
Playback Mode
Protect indicator
Battery capacity
Pages
Mode
(FINE)
(NORMAL)
(ECONOMY)
Playingback
Movie
Panorama
Playback
About Recocrding Mode
Manual recording
indicator
Macro indicator Recording Mode
Remaining
number of page
Mode
(FINE)
(NORMAL)
(ECONOMY)
EV shiftBattery capacity
Flash Mode
Auto None
Flash On
Flash Off
FUTURE
MOVIE
Normal Recording
Movie Recording
Serial Recording
(Continuous)
Serial Recording (Past)
Serial Recording (Future)
Self timer
Recording (Single)
Self timer
Recording (Movie)
Self timer
Recording (Future)
Panorama Recording
Title Recording
Number of images in panorama
(only when a panorama image
is on the monitor screen)
16
A
POWER SUPPLY
The camera features a two-way power supply that lets you
use either batteries (AA-size Alkaline or Lithium) or house-
hold AC current.
To load batteries
Be sure that camera power is turned off whenever loading or
replacing batteries.
1.
Slide the battery compartment
lock on the bottom of the camera
in the direction indicated by ar-
row (1), and swing open the bat-
tery compartment cover as indi-
cated by arrow (2).
2.
Insert four batteries and close the battery com-
partment cover.
Be sure to use Alkaline or Lithium batteries. Never use
manganese batteries (see precautions on the next
page).
Press down on the battery compartment cover at the point
marked A in the illustration until the cover locks into place
with a click.
Standard Battery Life
The battery life reference values given below indicate the
amount of time at standard temperature (25°C) until power
automatically turns off due to battery failure. They do not
guarantee that batteries will perform the amount of service
indicated. Battery life is reduced by low temperatures and
continued use.
“Continuous Recording” is made without use of the camera’s
flash.
Regardless of use of the camera’s flash, turning on and off
the POWER Switch, as well as other operating conditions
may affect the above values.
Type of
Operation
Continuous
Playback
Continuous
Recording
AA-size Alkaline
Batteries LR6
Approximately 190
minutes
Approximately 690
shots
AA-size Lithium
Batteries FR6
Approximately 320
minutes
Approximately 1,430
shots
17
Battery Handling Precautions
Incorrect use or handling of batteries can cause them to leak
or burst and seriously damage your camera. Be sure to note
the following important precautions to avoid problems with
batteries.
Remove batteries from the camera if you do not plan to use
it for more than two weeks.
Never recharge batteries, never allow direct connection
between two ends of a battery, and never try to take batter-
ies apart.
Do not expose batteries to direct heat or dispose of them
by burning. Doing so can create the danger of explosion.
Never mix batteries of different types.
Dead batteries are susceptible to leakage, which can
cause serious damage to your camera. Remove batteries
from the camera as soon as you notice they are dead.
The batteries that power this camera normally become
warm when they lose power. This does not indicate mal-
function.
POWER SUPPLY
Use only LR6 (AM-3) type alkaline or FR6 type
lithium dry cell batteries with this camera.
Never mix old batteries with new ones. Failure
to do so can result in bursting or leaking of bat-
teries, creating the danger of fire or personal
injury.
CAUTION
Type of Operation
Auto Play
Continuous Recording
AA-size alkaline batteries LR6
Approximately 100 minutes
Approximately 190 shots
NOTE
Battery life is based on Panasonic’s alkaline batteries
and Fujifilm’s lithium batteries.
They may vary if other manufacturer’s batteries are
used. For your reference, the values when the camera
is operated with Duracell’s batteries are shown below.
Always make sure that the positive [+] and
negative [–] ends of the batteries are facing
correctly, as noted by the markings on the
camera itself. Improper loading of batteries can
result in bursting or leaking of batteries, creat-
ing the danger of personal injury or soiling of
objects nearby.
CAUTION
18
Auto Power Off
Power automatically turns off whenever you do not perform
any camera operation for a period of time. Power turns off
after about two minutes in the Record Mode or after about
five minutes in the Playback Mode.
To restore power, simply slide the POWER Switch to the
right as you normally do.
IMPORTANT!
The Auto Power Off function does not operate under the
following conditions.
During playback of a movie (page 34)
During playback of a panorama (page 35)
During Auto Play (page 39)
During infrared communication (page 65)
When operations are being performed on a computer
connected to the camera via the camera’s DIGITAL
terminal. (page 59)
Whenever the AC adaptor is connected to the camera.
Low Battery Indicator
The battery capacity indicator in the lower left of the monitor
screen (shown only when image information display is
turned on) changes to “ ” whenever battery power goes
low. If you continue to use the camera, a battery warning
indicator will appear in the center of the monitor
screen, and then camera power will automatically turn off. If
this happens, replace all four batteries with new ones as
soon as possible.
Note that the camera may automatically shut down at a
somewhat higher level of remaining battery capacity when a
computer is connected to its DIGITAL terminal for data com-
munication. This is to protect against problems caused by
sudden power outage during data communications. Be-
cause of this, we strongly recommend that you use the op-
tionally available AC adaptor to power the camera whenever
performing data communication with a personal computer.
POWER SUPPLY
ON/OFF
POWER
19
POWER SUPPLY
Always be sure to use the AD-C620 AC adap-
tor only. Using any other AC adaptor can cause
damage to the camera not covered by the war-
ranty.
When unplugging the AC adaptor from the wall
socket, be sure to grasp the adaptor (not the
cord).
Avoid an undue bending, pulling, and twisting
of the AC adaptor’s cord, and never try to
lengthen the cord by splicing it with other wire.
Be sure to switch power off before connecting or discon-
necting the adaptor.
Always turn camera power off before disconnecting the AC
adaptor, even if the camera has batteries installed. If you
don’t, the camera will turn off automatically when you dis-
connect the AC adaptor. Even so, you run the risk of dam-
aging the camera whenever you disconnect the AC adap-
tor without first turning power off.
The AC adaptor may become warm to the touch after ex-
tended periods of use. This is normal and is not cause for
alarm.
After use turn off the power switch of the camera and un-
plug adaptor from the AC outlet.
AC power
terminal
Using AC Power
To power the camera from standard AC power, use the op-
tional AC adaptor (AD-C620).
AC Adaptor precautions
Never use an electrical outlet whose voltage is
outside the rating marked on the AC adaptor.
Doing so can create the danger of fire or elec-
trical shock. Use only the optional AC adaptor
specified for this camera.
Should the cord of the AC adaptor become
damaged (exposed internal wiring or shorts),
request a replacement from an authorized
CASIO service provider. A damaged AC adap-
tor cord creates the danger of fire or electrical
shock.
AC outlet
AC adaptor
CAUTION
CAUTION
20
RECORDING
3.
Set the NORMAL/MACRO
switch to (NORMAL)
position.
Use when the subject is located about 15 cm from
the lens (about 6 inches). See page 24 for details on
using this switch.
4.
Press to select
resolution setting you
want.
Each press of cycles through the resolution
setting in the following sequence: (Fine) (Nor-
mal) (Economy).
The resolution setting you select here affects how
many images can be stored in memory. See “Resolu-
tion Settings” on page 24 for details.
5.
Compose the image on
the monitor screen and
then press the shutter
button.
RECORDING
Basic Recording Operation
The following describes the basic operation for recording
images.
1.
Slide the Function
Switch to REC.
The REC position selects the Record Mode, while
PLAY selects the Playback Mode.
2.
Slide the POWER Switch
in the direction indicated
by the arrow.
The POWER Switch returns to its original position
when you release it.
Turning on power enters the normal Recording Mode.
The monitor screen shows the image picked up by the
lens.
You can perform step 2 before step 1, if you want.
If power turns off, slide the POWER Switch again to
turn it back on.
REC
PLAY
ON/OFF
POWER
MODEF
/Tran-P
NE
21
RECORDING
Viewing the subject on the monitor screen, carefully
compose it within the frames provided on the screen.
Take care to avoid blocking the lens with your fingers.
Carefully press the shutter button, taking care not to
move the camera as you do.
You can view images immediately after you record
them by sliding the Function Switch to the PLAY.
CAUTION
Never open the battery compartment cover, discon-
nect the AC adaptor from the camera or unplug it from
the wall socket while the “WAIT” message is on the
LCD. Doing so will not only make storage of the cur-
rent image impossible, it can also corrupt other image
data already stored in camera memory.
Fluorescent lighting actually flickers at a frequency
that cannot be detected by the human eye. When us-
ing the camera indoors under such lighting, you may
experience some brightness or color problems with
recorded images.
NOTE
This camera is equipped with “flash memory” that re-
tains images even when batteries go dead and the AC
adaptor is not connected. Images can be recalled after
new batteries are loaded or the AC adaptor is con-
nected.
Shooting Images Outdoors
Note that strong direct or reflected light can cause vertical
lines in an image. This is due to the characteristics of the
camera’s charge-coupled device (CCD), and it does not indi-
cate malfunction of the camera.
22
RECORDING
IMPORTANT!
Never use the flash on areas where combustible or
explosive gas is present. Doing so creates the danger
of fire and explosion.
Never fire the flash in the direction of a person operat-
ing a motor vehicle. Doing so can interfere with the
driver’s vision and create the danger of accident.
Never fire the flash while it is too close to the subject’s
eyes. Be especially careful with small children. In-
tense light from the flash can cause eye damage if it is
fired too close to the eyes, especially with young chil-
dren. When using the flash, the camera should be at
least one meter (3.3') from the eyes of the subject.
Make sure that you do not touch or block the flash or
exposure sensor with your fingers. Doing so can soil
these components and interfere with correct flash op-
eration.
Flash should be used for distances within the range of
about 0.7 meters to 3 meters (2.3' to 9.8'). Flash does
not work well outside this range.
Depending on operating conditions (type of battery
being used, temperature, etc.), it may take up to 10
seconds for the flash unit to charge.
The flash does not fire in the following modes: Serial,
Movie, Self-timer (movie or future). The indicator
flashes to indicate this condition.
The flash unit will not charge when battery power is
low. The indicator flashes red to warn you that the
flash will not fire correctly, which may affect exposure
of the image. Replace batteries as soon as possible
when this happens.
The image on the monitor screen is cleared and the
Charge Lamp flashes while the flash unit is charging.
Using the Flash
You can use the built-in flash unit to provide illumination dur-
ing recording. Auto Flash causes the flash to fire automati-
cally whenever the shutter button is pressed while available
light is below a certain level.
1.
Press to select the flash mode.
Each press of cycles through the flash
modes in the following sequence: Auto Flash Flash
On “ Flash Off “ ”.
Indicator
None
Flash Mode
Auto Flash
Flash On
Flash Off
Description
Flash is automatically enabled and
disabled in accordance with expo-
sure conditions.
Flash is always fired, regardless of
exposure conditions.
Flash is never fired, regardless of
exposure conditions.
Charge lamp
MODEFNE
CHARGE /Tran-P
23
RECORDING
IMPORTANT!
Do not apply excessive force when rotating the lens
body. Doing so can cause serious damage to the lens.
Do not carry the camera or move it around while hold-
ing onto only the lens body.
Return the lens body to its normal position (with the
lens pointing from the front of the camera) before stor-
ing the camera.
Any images recorded while the lens body is rotated so the
lens is pointed from the back of the camera are stored as
mirror images of the image that appears in the LCD before
the shutter button is pressed.
A.... LCD when shutter button is
pressed (in the Record
Mode)
B.... LCD when image is played
back from camera memory
Rotates up to 180
°
towards the back
Changing the Lens Orientation
The lens of the camera is built into a lens body that is de-
signed to rotate. This means you can change the angle of
the lens without moving the rest of the camera.
Rotates up to 90
°
towards the front
24
RECORDING
Resolution Settings
Pressing cycles through the available resolution set-
tings. Each press of cycles through the resolution
setting in the following sequence: (Fine) (Normal)
(Economy).
Setting
Indicator Resolution Number of Images
Fine
Normal
Economy
30 (minimum)
(approx. 124KB compressed image)
60 (minimum)
(approx. 62KB compressed image)
120
(approx. 32KB compressed image)
NORMAL/MACRO Switch
The NORMAL/MACRO switch tells the
camera how much distance there will
be between the lens and the object
whose image you are recording. The
following table describes the condi-
tions covered by each switch setting.
is shown on the monitor screen
whenever the macro position is in use.
The above figures indicate the distance from the lens protec-
tion filter to the subject.
Focus Range
(NORMAL)
0.7m ~
(2.3' ~ )
(MACRO)
14cm ~ 16cm
(5.5" ~ 6.3")
MODEFNE
CHARGE /Tran-P
The above figures are approximations only. The actual
number of images depends on image subject matter.
• Up to 120 images (total of , , images)
25
RECORDING
3.
After adjusting the exposure, press the shutter
button to record the image.
【−】
【+】
Exposure Adjustment
This camera features an program AE function that automati-
cally changes shutter speed and aperture in accordance
with available light. In addition, you can also manually adjust
the exposure to compensate for backlighting, indirect indoor
lighting, dark backgrounds, and other special conditions.
To manually adjust the exposure
1.
Set the Function Switch to REC.
2.
Use [+] and [–] to perform exposure compensa-
tion and display a bar graph on the monitor
screen.
Pressing [+] makes the image on the LCD brighter.
Use it to adjust for dim indoor lighting and backlight-
ing.
Pressing [–] makes the image on the LCD darker. Use
it to adjust for bright sunlight.
The bar graph turns red whenever the compensation
value is at its limit.
26
RECORDING
NOTES
Exposure adjustment is generally expressed in terms
of an exposure adjustment value. The exposure ad-
justment value is always set to zero whenever you
turn on the camera.
The exposure adjustment value is changed by 0.25EV
with each press of [+] or [–]. The range of the value is
–2EV to +2EV.
The exposure adjustment value automatically reverts
to zero whenever the shutter button is pressed. You
can manually reset the exposure adjustment value by
using [+] and [–] to change the value back to zero,
which is indicated when the bar graph disappears from
the monitor. EV shift is fixed during panorama record-
ing.
Shutter speed and aperture is fixed whenever an EV
shift setting is made.
IMPORTANT!
When the exposure adjustment is too bright or too
dark, you may not be able to adjust within the range of
–2EV to +2EV.
The aperture setting of this camera switches auto-
matically in accordance with available lighting when
an image is recorded. The switching operation causes
the camera to emit a noise. This is normal and does
not indicate malfunction.
27
OTHER RECORDING FUNCTIONS
This section describes more advanced recording operations
that are also provided by this camera.
Movie Recording
You can record a movie up to 3.2 seconds long.
1.
Slide the Function Switch to REC.
2.
Press MODE a number of
times until the screen
shown on the right hand
appears, which indicates
the Movie Recording
Mode.
3.
Compose the image on the monitor screen and
then press the shutter button.
The movie icon flashes as 32 frames are recorded at
intervals of approximately 0.1 second.
OTHER RECORDING FUNCTIONS
Storage of the 32 frames in memory uses up two still
images worth (two pages) of memory.
See “Playingback Movie” on page 34 for details on
playingback movie.
IMPORTANT!
Flash is disabled during movie recording.
All the images that make up a movie are treated as a
single unit for image movement, delete, and protect
operations.
Movie images that are uploaded to a personal com-
puter and then downloaded back to the camera can-
not be played back as a movie.
The resolution of movie images is always (Fine), and
cannot be converted.
Memory enough to store at least two (Fine) images
must be free in order to record a movie.
Movie Recording Mode
28
OTHER RECORDING FUNCTIONS
1.
Slide the Function Switch to REC.
2.
Press MODE a number of
times until the screen
shown on the right hand
appears, which indicates
the Serial Recording
Mode.
3.
Press MENU.
4.
Use [+] and [–] to select the Serial Recording
Mode you want to use, and then press the shut-
ter button.
5.
Compose the image on the monitor screen and
then press the shutter button to start the
record operation.
If you are using the CONT.S mode, keep the shutter
button depressed until you record everything you
want.
IMPORTANT!
The flash unit is disabled during serial recording.
The number of images actually recorded in the PAST
mode and FUTURE mode depend on the amount of
memory available.
Serial Recording
There are three different serial recording modes: continu-
ous, past, and future.
Continuous (CONT.S)
With this mode, image recording continues as long as the
shutter button is depressed. Images are recording at inter-
vals of about one second.
Past (PAST)
This mode records the image in front of the lens the instant
the shutter button is pressed, along with three images 0.05,
0.1 and 0.15 seconds before the shutter button is pressed.
Future (FUTURE)
This mode records the image in front of the lens the instant
the shutter button is pressed, along with four subsequent
images at intervals of about 0.05 second.
SHUTTER
1
Time Recording (Past)
234
Time Recording (Future)
1234
Serial Recording Mode
29
OTHER RECORDING FUNCTIONS
2.
Press MODE a number of
times until the screen
shown on the right hand
appears, which indicates
the Self-timer Recording
Mode.
3.
Press MENU.
4.
Use [+] and [–] to select the Self-timer Record-
ing Mode you want to use, and then press the
shutter button.
Self-timer Recording
There are three different Self-timer Recording Modes:
single, movie, and future.
Single (SINGLE)
After about 10 seconds have elapsed, this mode records a
single image.
Movie (MOVIE)
Starts movie recording 10 seconds after the shutter button
is pressed. See “Movie Recording” on page 27 for details
on movie recording.
Future (FUTURE)
After about 10 seconds have elapsed, this mode records
the image in front of the lens the instant the shutter button
is pressed, along with four subsequent images.
IMPORTANT!
The flash fires only when SINGLE is selected.
1.
Slide the Function Switch to REC.
Self-timer
Recording Mode
30
OTHER RECORDING FUNCTIONS
Panorama Recording
With panorama recording you record a series of images and
then link them to create a single panoramic effect.
1.
Slide the Function Switch to REC.
2.
Press MODE a number of
times until the screen
shown on the right hand
appears, which indicates
the Panorama Recording
Mode.
5.
Compose the image on the monitor screen and
then press the shutter button to start the
record operation.
A 10-second countdown starts on the LCD. The shut-
ter will release automatically when the end of the
countdown is reached.
To cancel ongoing Self-Timer operation, press shutter
button.
NOTE
During self-timer recording, you may find it helpful to
rotate the swivel lens mechanism 180 degrees so the
monitor screen faces the same direction as the lens.
This way you can always see how much time is left until
the start time is reached and recording begins.
Panorama
Recording Mode
31
OTHER RECORDING FUNCTIONS
Manual Recording
With this operation you manually set the aperture and white
balance to the settings you want to use in order to produce
special effects or to compensate for special conditions.
You can override automatic settings and manually set ex-
posure and white balance to create exactly the effects you
want for your images.
Aperture
You can select AUTO, F2, or F8 as the aperture setting. F8
allows recording of a wider area (NORMAL Mode: 0.3m ~
(11.8" ~ ), MACRO Mode: 11 ~ 26cm (4.3" ~ 10.2")).
White Balance
This settings lets you adjust white areas to produce a more
natural-looking image.
WB1
WB1 .... Use this setting when indoor lighting is making
the image appear reddish.
WB2 .... Use this setting when indoor lighting is making
the image appear bluish.
WB3
WB3 .... Use this setting for outdoor recording.
3.
Compose the image on the monitor screen and
then press the shutter button to record.
The left edge of the previous image you recorded re-
mains on the monitor screen, so you can use it to com-
pose the next image correctly.
Up to nine images can be grouped into a panorama.
Press MENU when you want to stop a panorama re-
cording operation.
If you want to link more than 9 images into a pan-
orama, upload the images to a computer and use your
computer application to link them.
Aperture and white balance settings are locked when
you record the first image of a panorama, and these
settings are applied to all subsequent images in that
panorama.
See “Panorama Playback” on page 35 for details on
playing back panoramas.
Panorama images that are uploaded to a personal
computer and then downloaded back to the camera
cannot be played back using panorama playback.
WB2
32
OTHER RECORDING FUNCTIONS
1.
Slide the Function Switch to REC.
2.
Press MODE a number of
times until the screen
shown on the right hand
appears, which indicates
the Manual Recording
Mode.
3.
Press MENU.
4.
Use [+] and [–] to select
the aperture (APT) set-
ting you want to use, and
then press the shutter
button.
5.
Use [+] and [–] to select the white balance (WB)
setting you want to use, and then press the
shutter button.
The indicator is in the upper left corner of the dis-
play screen.
Manual settings you make remain in effect until you
turn off power or change to another mode.
6.
Compose the image on the monitor screen and
then press the shutter button to record.
The image is recorded using the aperture and white
balance settings you made above.
To return the aperture and white balance settings to
their default (AUTO) settings, turn off the camera or
select normal recording again and set the aperture
(APT) and white balance (WB) both to AUTO.
Manual Recording Mode
33
PLAYBACK
PLAYBACK
The following describes the different techniques that you can
use to playback recorded images.
Basic Playback Operation
The built-in monitor screen of the camera lets you play back
recorded images without connecting an external monitor.
1.
Slide the Function
Switch to PLAY.
The PLAY position selects the Playback Mode, while
REC selects the Record Mode.
2.
Use [+] and [–] to scroll through the images
stored in camera memory.
Press [+] to scroll forward and [–] to scroll back. Hold-
ing down either button scrolls at high speed.
Pressing the shutter button and the [–] button at the
same time jumps to the first image.
Pressing the shutter button and [+] button at the same
time jumps to the last image.
You cannot perform a jump to the first or last image in
memory during playback of a movie or panorama.
REC
PLAY
【+】【+】
【−】【−】
NOTE
Sliding the Function Switch to PLAY immediately after
recording an image displays the image you just re-
corded first.
34
PLAYBACK
Press the shutter button to return to a previous display
from a mirror display or full screen display. If the previ-
ous display does not appear right away, keep the
shutter button depressed until it does.
4.
After playingback movie is complete, press the
shutter button again.
If you playback a movie using the basic (non-movie)
playback operation, only the first frame of the memory
page that contains the first 16 frames of the movie
appears on the screen.
If one of the memory pages that contains 16 movie
frames has been deleted by the PC Link software ap-
plication, movie will be shortened by half.
When a movie page (of 16 frames) is sent to or re-
ceived from a personal computer, the applicable
frames play on the monitor screen of the camera.
Uploading a movie image to a computer causes it to
be converted automatically to two images, each of
which contains 16 frames.
Auto Power Off is disabled while playingback movie is
in progress.
Playingback Movie
Use the following operation to play back a movie that was
recorded using the operation under “Movie Recording” on
page 27.
1.
Slide the Function Switch to PLAY.
2.
Use [+] and [–] to select
the movie you want to
playback.
3.
Press the shutter button to start playingback
movie.
You can use [+] (forward) and [–] (reverse) during
playingback movie to change the playback direction.
Pressing MENU during playingback movie changes to
the menu screen. While the menu screen is on the
monitor, you can use [+] (forward) and [–](reverse)
move frame-by-frame through the movie, or you can
press DISP to change to mirror display and full screen
display.
35
PLAYBACK
Panorama Playback
Use the following operation to playback panoramas re-
corded using the operation under “Panorama Recording” on
page 30.
1.
Slide the Function Switch to PLAY.
2.
Use [+] and [–] to select
the panorama you want
to playback.
3.
Press the shutter button
to start panorama play-
back.
You can use [+] (forward)
and [–] (reverse) during
panorama playback to
change the playback direc-
tion.
Press MENU during pan-
orama playback to advance
to the next frame (or previ-
ous frame in the case of re-
verse playback).
4.
Press the shutter button to stop panorama
playback.
NOTE
The Auto Power Off function is disabled while pan-
orama playback is being performed.
36
PLAYBACK
4.
Use [+] and [–] to select
VIEW, and then press the
shutter button.
5.
Use [+] and [–] to select ZOOM, and then press
the shutter button.
This magnifies the center part of the image to twice its
normal size.
6.
Use [+] and [–] to slide the image so you can
view the part of it that you want.
7.
After you are finished, press any button be-
sides [+], [–], or DISP return the image to its
normal size.
Using Zoom
The following operation lets you magnify an image to twice
its normal size. Note that you can zoom in only on a single
still image.
IMPORTANT!
Movie and panorama images cannot be zoomed.
1.
Slide the Function Switch to PLAY.
2.
Use [+] and [–] to select the image you want to
zoom in.
3.
Press MENU.
37
PLAYBACK
1.
Slide the Function Switch to PLAY.
2.
Press MENU.
Displaying Multiple Images
The following operation lets you simultaneously view either
four or nine images on the same screen. This capability is
especially useful when playing back to the screen of a con-
nected TV, and can be used to display a catalog of products,
etc.
When a panorama or movie is included in a multi-page dis-
play, only the first image that makes up the panorama or
movie is shown.
A movie image appears smaller in size than a normal (non-
movie) image.
Enlarged Image Movement
Pressing [–] slides the image in the opposite direction.
NOTE
When an image is enlarged while image information is
turned on (page 15), an image part indicator ap-
pears in the upper right corner to indicate which part of
the image is currently on the screen. Display of the im-
age part indicator can be toggled on and off during the
enlarged display by pressing DISP.
【+】 【+】 【+】
【+】 【+】 【+】
【+】 【+】 【+】
38
PLAYBACK
3.
Use [+] and [–] to select
VIEW, and then press the
shutter button.
4.
Use [+] and [–] to select 4PAGE or 9PAGE, and
then press the shutter button.
The first image of the set is the image that was on the
screen when you performed step 2 of this operation.
The other images are those that sequentially follow
the first one.
5.
Use [+] and [–] to scroll through images stored
in memory.
6.
After you are finished, press any button be-
sides [+], [–], or DISP return to the normal
single-image display.
Selecting a Specific Image
Use the following operation to select one of the images on a
multi-image screen and change to the display of that image
only.
1.
Use the operation on page 37 to display the
multi-image screen that contains the image
you want.
2.
Press DISP.
This displays the image
number on the upper left
image.
3.
Use [+] and [–] to move the page (image) num-
ber display from image-to -image on the moni-
tor screen.
4.
Press the shutter button
to display the image
whose page (image)
number is shown.
12
34
56
78
910
11
【+】 【+】
【−】 【−】
1F
39
PLAYBACK
IMPORTANT!
Auto Power Off (page 18) is disabled whenever the
Auto Play is being used. This means you should not
leave Auto Play running when using batteries to power
the camera. Doing so will cause batteries to go dead.
Be sure to stop Auto Play and turn off the camera after
you are finished.
To start Auto Play
1.
Slide the Function Switch to PLAY.
2.
Press MENU.
3.
Use [+] and [–] to select
VIEW, and then press the
shutter button.
4.
Use [+] and [–] to select AUTO PLAY, and then
press the shutter button.
5.
To stop Auto Play, press any button besides
MENU.
Note that all buttons are disabled while an image
change is in progress. Wait until an image is stopped
on the screen before performing a button operation, or
hold down the button until the image stops.
Auto Play
Auto Play automatically scrolls through the images stored in
memory. You can also specify how much time should be al-
lowed between each image.
40
PLAYBACK
Setting the Auto Play Interval
You can use the following operation to set the amount of
time that should be allowed between each image during
Auto Play (the Auto Play interval).
1.
Start Auto Play using the operation under “To
start Auto Play” on page 39.
2.
Press MENU.
Be sure to wait for the im-
age on the screen to stop
before performing any but-
ton operation.
3.
Use [+] and [–] to set the Auto Play interval
value you want and then press the shutter but-
ton.
You can set the Auto Play interval to any value in the
range of 1 to 30 (seconds).
After you make the above setting, Auto Play resumes
using the interval you set.
Screen Saver
The screen saver function automatically activates Auto Play
(which automatically scrolls through images) whenever you
do not perform any operation for about five minutes in the
Playback Mode. This protects the camera’s monitor screen
and the screen of a connected TV against “burn in” of a static
image that is left displayed too long.
IMPORTANT!
The screen saver is enabled only when the camera is
being powered by its optional AC adaptor. If you do
not perform any operation for five minutes under bat-
tery power, camera power automatically turns off
(Auto Power Off).
The screen saver is disabled (it does not activate) if
there are no images stored in memory.
PC Link will not send images between the camera and
a personal computer while the screen saver is turned
on. Make sure you turn off the screen saver before
trying to perform any image transfer operation. Note
that the screen saver is turned on when you purchase
the camera.
69
INFRARED DATA TRANSFER
5.
Use [+] and [–] to select
SEND, and then press
the shutter button.
6.
Use [+] and [–] to select ALL, and then press
the shutter button.
7.
Use step 6 of the proce-
dure under
BUTTON OPERATION”
on page 67 to start the
data transfer operation.
Transferring Images Using PC Link Software
With PC Link Software, Cable-free infrared image data
transfer can be performed with a personal computer that
supports IrDA1.0 protocol or later. See the documentation
that comes with your computer for details on its infrared
communication capabilities.
1.
Slide the Function Switch to the PLAY posi-
tion.
2.
Press MENU.
3.
Use [+] and [–] to select
IR, and then press the
shutter button.
70
INFRARED DATA TRANSFER
Infrared Data Transfer Precautions
Make sure that the infrared ports of the sending unit and
the receiving unit are pointed straight at each other, and
that there is nothing blocking the path between them.
To avoid problems that occur due to sudden loss of battery
power during infrared image transfer, we recommend that
you use the separately AC adaptor specified for this cam-
era when transferring images.
This camera cannot perform infrared data transfer with any
device that does not support the IrTran-P protocol.
Avoid performing infrared data transfers in areas expose to
direct sunlight or other strong illumination.
Such conditions as natural outdoor light, low battery power,
too much distance between infrared ports, and misalign-
ment of infrared ports can cause failure of image transfers
or corrupted data.
Proper image data transfer is impossible whenever there is
anything blocking either of the infrared ports.
Do not locate any other infrared emitting device (such as
remote control units) or fluorescent lighting in the vicinity of
the cameras while they are performing infrared image
transfers.
A sender ID, which shows manufacturer and model name,
normally appears on the display during infrared data com-
munication. Some equipment, however, does not transmit
a sender ID, in which case nothing appears on the display.
Failure to be able to establish an IrDA connection can
mean that the device you are trying to communication with
does not support the IrDA standard, or that the applications
being used are not compatible. When this happens, you
probably have to connect the camera to the computer with
a separately available cable for data transfer.
4.
Use [+] and [–] to select
QV-LINK, and then press
the shutter button.
5.
Align the infrared port of the camera with the
port of your computer.
6.
Start up the PC Link software on your com-
puter and transfer the images you want.
71
TROUBLESHOOTING
Symptom Probable Cause Action
Power Supply
Recording
No power
Sudden power failure
indicator on LCD
No recording when shutter
button is pressed
Power failure during self-
timer operation
Poor LCD image focus
Poor color and brightness
when indoors
1. Batteries not loaded correctly.
2. Dead batteries
3. Wrong AC adaptor
1. Operation of Auto Power Off
2. Low battery power
3. Use of manganese batteries.
Batteries are about to go dead.
1. Function Switch sets to PLAY.
2. Flash unit is charging.
3. The message “MEMORY FULL” is on the monitor
screen.
4. The message “REMAINING” is on the monitor
screen.
Low battery power
Incorrect NORMAL/MACRO switch setting
Indoor fluorescent lighting
1. Correctly load batteries (page 16).
2. Replace batteries with new ones (page 16).
3. Use only recommended AC adaptor .
1. Turn power back on.
2. Replace batteries with new ones (page 16).
3. Replace manganese batteries with alkaline bat-
teries.
Replace all four batteries with a set of new ones
(page 16).
1. Set Function Switch to REC.
2. Wait until flash unit charging is finished.
3. Delete images you no longer need from camera
memory.
4. Press to change to another resolution
mode, or delete images you no longer need from
camera memory.
Replace batteries (page 16).
Use NORMAL for scenery and group photos, and
MACRO for close-ups (page 24).
Shoot under incandescent or other non-fluorescent
lighting (page 21).
72
TROUBLESHOOTING
Cannot perform movie re-
cording.
Color of recorded image is
strange.
No +/– button operation
during multi-page display
Camera is connected to a
TV, but LCD monitor con-
tents do not appear on TV
screen.
Delete operation does not
operate.
Menu icon is blue and noth-
ing happens when it is se-
lected.
All buttons and switches do
not operate.
1. Movie Record Mode is not selected.
2. Insufficient camera memory capacity.
Reflection from sunlight or light from another
source
Button operation during page change
1. Incorrect camera-TV connection
2. Wrong TV set up
All pages are protected.
Icons for functions that are disabled in the Playback
Mode are blue.
Malfunction due to static electrical charge or strong
impact.
Camera is connected to a computer or QV Color
Printer.
1. Press MODE to enter the Movie Record Mode
(page 27).
2. Delete images you no longer need from camera
memory, so there are at least two images worth
of free memory capacity (page 54).
Reorient the camera so that light is not shining di-
rectly into lens.
Wait until an image is on the LCD before performing
a button operation.
1. Connect correctly using the special video cable
that comes with the camera (page 60).
2. Set up the TV correctly.
Unprotect the page you want to delete (page 51).
Select a different function or change to the Record
Mode.
Remove batteries and disconnect the AC adaptor if
you are using one. Restore power and turn the
camera on. If this does not work, contact your
dealer or an authorized CASIO service provider.
Symptom Probable Cause Action
Other Deletion Playback Recording
73
TROUBLESHOOTING
Cannot exchange data be-
tween two cameras
Cannot transfer data (error
keeps occurring)
Cannot perform infrared
data communication.
Auto Play starts even
though it is not selected.
1. Incorrect cable connection
2. Camera connected to is not turned on.
3. Function Switch sets to REC.
1. Sending camera’s memory is empty.
2. Receiving camera’s memory is full
3. Receiving camera’s Function Switch is in REC
position.
4. Low battery (indicated by )
5. Disconnection of cable during data communica-
tion
1. Other device does not support IrTran-P protocol.
2. Sending and receiving units are not positioned
correctly.
3. Object blocking the infrared light path, another
device using infrared light is in the vicinity, or
fluorescent lighting.
4. Direct sunlight
Activation of screen saver.
1. Connect correctly (page 62).
2. Turn power on after connecting cable.
3. Set Function Switch to PLAY (page 62).
1. Correct the situation and try again.
2. Correct the situation and try again.
3. Change Function Switch setting of receiving
camera to PLAY (page 62).
4. Replace batteries or use the AC adaptor (page
16).
5. Securely reconnect the cable.
1. Communicate only with devices that support
IrTran-P protocol.
2. Orient the infrared ports of the two devices so
they are pointed directly at each other (page 67).
3. Move the sending and receiving devices away
from the source of the problem.
4. Avoid infrared data communication in direct sun-
light.
Turn off screen saver (page 40).
Other
Symptom Probable Cause Action
74
Error during data communication. Check cable connec-
tions and mode settings.
Indicates that movie recording is not possible because
camera memory is full.
Delete images no longer need or reduce the resolution of
some of the images in camera memory.
Problem with internal memory. Perform the following
procedure. The reset procedure described below can
also be used to recover from a memory error.
Important!
The following procedure deletes all images stored in
memory. You can use the optionally available connection
kit (LK-11/LK-12S/LK-22S) to make copies of images be-
fore deleting them.
1. Holding down and
MENU at the same time.
2. After checking that the SYSTEM RESET message is
on the display, press the shutter button to perform a
system reset or turn power off if you do not want to
perform a system reset.
Never turn off power while the system reset is in
progress! Doing so will damage camera memory are
require servicing by an authorized service provider!
Be sure to power the camera using the AC adaptor or
a new set of alkaline or lithium batteries. Weak batter-
ies or manganese batteries can result in a power fail-
ure while the system reset operation is in progress,
causing damage to camera memory.
If the MEMORY ERROR message continues to ap-
pear on the display after you perform the reset proce-
dure, contact your nearest CASIO service provider.
ERROR
FULL
MEMORY ERROR
#1, #3
CONSULT THE
OWNER’S MANUAL!
MESSAGES
After the final “SYSTEM RESET” confirmation message
appears, press the shutter button.
The display should return to normal after the system re-
set is complete.
Important!
System reset can result in a change in the order of
images stored in camera memory.
Corrupted images may be lost entirely.
If image data is partially corrupted, parts of the image
may not be recoverable.
Problem with internal memory. Contact your dealer or an
authorized CASIO service provider.
Not enough memory for further recording. Delete some
images from memory or change resolution of stored im-
ages from FINE to NORMAL or NORMAL to ECONOMY
(page 24, 54).
No images are stored in memory.
Not enough memory for recording in current resolution
mode. Press to change to another resolution
mode, delete some images from memory, or change
resolution of stored images from FINE to NORMAL or
NORMAL to ECONOMY (page 24, 54).
Problem with internal memory. Contact your dealer or an
authorized CASIO service provider.
MEMORY ERROR
#2, #4
CONSULT THE
OWNER’S MANUAL!
MEMORY FULL
NO IMAGE
REMAINING
SYSTEM ERROR
CALL TECH
SUPPORT
SYSTEM RESET
YES SHUTTER
NO CALL
TECH SUPPORT
75
SPECIFICATIONS
Recording System ............. Digital (JPEG base); PC Link software
can be used to input images in CAM,
JPEG, TIFF and other format.
Recording Medium ............ Flash memory (4MB)
Memory Capacity...............FINE: 30 images (minimum)
(Approximately 124KB compressed)
NORMAL: 60 images (minimum)
(Approximately 62KB compressed)
ECONOMY: 120 images
(Approximately 32KB compressed)
The above figures are approximations
only. The actual number of images de-
pends on image subject matter.
Up to 120 images
(total of , , images)
Image Element ................... 1/4-inch CCD (Total Pixels: 350,000;
Effective Pixels: 330,000)
Computer Output image ...640 x 480 pixels
Lens .................................... Fixed focal point with macro position;
F2, f = 3.9mm
Aperture.............................. f2, f8 auto switching/fixed
Focus Range ...................... NORMAL: 0.7m to (2.3' to )
MACRO: 14cm to 16cm (5.5" to 6.3")
(From surface of protective lens.)
Light Metering.................... TTL center priority by CCD
Exposure Metering ............ Program AE, Aperture Priority AE
Exposure Range ................EV +5 to 18
Exposure Correction......... -2EV to +2EV (1/4EV units)
Type of
Operation
Continuous
Playback
Continuous
Recording
AA-size Alkaline
Batteries LR6
Approximately 190
minutes
Approximately 690
shots
AA-size Lithium
Batteries FR6
Approximately 320
minutes
Approximately 1,430
shots
Shutter ................................ CCD shutter
Shutter Speed ....................1/8 to 1/4000 second
White Balance ....................Automatic, Fixed
Self-timer ............................10 seconds
Recording Modes .............. Single-image; Serial; Self-timer; Movie;
Panorama; Title; Macro
Flash Modes ....................... AUTO, ON, OFF
Monitor/Viewfinder ............ 1.8-inch TFT low-glare color LCD;
122,100 (555 x 220) pixels
Video Output ...................... NTSC
Infrared Communication .. IrDA1.0; IrTran-P compliant
Input/Output Terminals .... DIGITAL IN/OUT, VIDEO OUT, AC
adaptor connector
Power Supply..................... Four batteries (AA-size alkaline or
lithium batteries)/AC adaptor (AD-
C620)
Power Consumption ......... Approximately 6.8 W
Battery Life
The values noted below indicate the number of hours before battery
failure under normal operating temperature (25°C), as estimated by
battery manufacturers. These values are for reference only, and do
not guarantee that any particular set of batteries actually will provide
the service life indicated. Low temperatures shorten battery life.
76
“Continuous Recording” is made without use of the camera’s flash.
Regardless of use of the camera’s flash, turning on and off the power
switch, as well as other operating conditions may affect the above
values.
Note: The above values are obtained based on Panasonic’s alka-
line batteries and Fujifilm’s lithium batteries.
They may vary if other manufacturer’s batteries are used. For your
reference, the values when the camera is operated with Duracell’s
batteries are shown below.
Dimensions ........................ 129(W) x 66(H) x 38(D) mm /
5" (W) x 2.6" (H) x 1.5" (D)
Weight .................................Approximately 200g /
7oz. (excluding batteries)
Standard Accessories ...... wrist strap; soft case; video cable; four
LR6 alkaline batteries;owner’s manual
The liquid crystal panel built into this camera is the product of pre-
cision engineering, with an effective pixel rate of 99.99%. This also
means, however that 0.01% of the pixels can be expected to fail to
light or to remain lit at all times.
SPECIFICATIONS
Type of Operation
Auto Play
Continuous Recording
AA-size alkaline batteries LR6
Approximately 100 minutes
Approximately 190 shots
18

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Casio QV-770 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Casio QV-770 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,68 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info