586827
27
Verklein
Vergroot
Pagina terug
1/38
Pagina verder
PX150-ES-1A
ES
USER’S GUIDE
GUÍA DEL USUARIO
Please keep all information for future reference.
Guarde toda información para tener como referencia futura.
Safety Precautions
Before trying to use the piano, be sure to read
the separate “Safety Precautions”.
Precauciones de seguridad
Antes de intentar usar el piano, asegúrese de
leer las “Precauciones de seguridad” separadas.
EnglishEspañol
PX
-
15 0
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Important!
Please note the following important information before using this product.
Before using the AD-A12150LW Adaptor to power the unit, be sure to check the AC Adaptor for any damage first. Carefully check the power
cord for breakage, cuts, exposed wire and other serious damage. Never let children use an AC adaptor that is seriously damaged.
The product is not intended for children under 3 years.
Use only CASIO AD-A12150LW adaptor.
The AC adaptor is not a toy.
Be sure to disconnect the AC adaptor before cleaning the product.
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other.
A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit
from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury
from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as
power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.
The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the
apparatus.
The P (POWER) indicator being unlit does not mean the apparatus is completely disconnected from the MAINS.
When you need to have the apparatus completely disconnected from the MAINS, you must unplug the power cord. For that purpose, locate
the apparatus in a way that secures easy access to the power cord.
NOTICE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC WARNING
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the
equipment.
Declaration of Conformity
Model Number: PX-150
Trade Name: CASIO COMPUTER CO., LTD.
Responsible party: CASIO AMERICA, INC.
Address: 570 MT. PLEASANT AVENUE, DOVER, NEW JERSEY 07801
Telephone number: 973-361-5400
This device complies with Part 15 of the FCC Rules, Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
Manufacturer:
CASIO COMPUTER CO., LTD.
6-2, Hon-machi 1-chome, Shibuya-ku, Tokyo 151-8543, Japan
Responsible within the European Union:
CASIO EUROPE GmbH
Casio-Platz 1, 22848 Norderstedt, Germany
This mark applies in EU countries only.
Declaration of Conformity According to EU Directive
E-1
English
Contents
General Guide ................................... E-2
FUNCTION Button...................................................... E-3
Saving Settings and Using Operation Lock ................ E-3
Power Outlet...................................... E-4
Using an AC Adaptor .................................................. E-4
Turning Power On or Off............................................. E-4
Connections...................................... E-6
Connecting Headphones ............................................ E-6
Connecting Audio Equipment or an Amplifier ............. E-6
Connecting a Pedal .................................................... E-7
Bundled and Optional Accessories............................. E-7
Playing with Different Tones ........... E-8
Selecting and Playing a Tone ..................................... E-8
Layering Two Tones ................................................. E-10
Using Effects............................................................. E-11
Using the Metronome ............................................... E-11
Playing a Piano Duet ................................................ E-12
Playing Back Built-in Songs .......... E-14
Playing Back All of the Built-in Songs....................... E-14
Playing Back a Specific Music Library Song............. E-15
Practicing with a Music Library Song........................ E-15
Recording and Play Back............... E-16
Tracks ....................................................................... E-16
To record to a specific track of a song...................... E-17
To record to one track of a song while
listening to the playback of the other track ............... E-18
Playing Back from Digital Piano Memory.................. E-18
Deleting Recorded Data ........................................... E-19
Configuring Settings with the
Keyboard ......................................... E-20
To configure settings with the keyboard....................E-20
Keyboard Keys Used for Configuring Settings.......... E-21
Parameter List...........................................................E-22
Tone selection ....................................................... E-22
Reverb ................................................................... E-22
Chorus ................................................................... E-22
Brilliance ................................................................ E-22
Layer balance ........................................................ E-22
Tempo (TEMPO) ................................................... E-22
Song select (SONG SELECT) ............................... E-22
Song volume.......................................................... E-22
Metronome beat (METRONOME BEAT) ............... E-22
Metronome volume ................................................E-22
Keyboard key (Transpose) .................................... E-23
Keyboard tuning (Tuning) ...................................... E-23
Octave shift............................................................ E-23
Temperament ........................................................ E-23
Temperament select..............................................E-23
Temperament Base note .......................................E-23
Touch response (TOUCH RESPONSE)................ E-23
USB device mode .................................................. E-24
Send channel......................................................... E-24
Local control .......................................................... E-24
Operation tone....................................................... E-24
Back up.................................................................. E-24
Operation lock........................................................ E-24
Connecting to a Computer............. E-25
Minimum Computer System Requirements .............. E-25
Connecting the Digital Piano to Your Computer ....... E-25
Using MIDI ................................................................ E-26
Transferring Song Data with a Computer.................. E-26
Reference......................................... E-29
Troubleshooting ........................................................ E-29
Product Specifications............................................... E-30
Operating Precautions .............................................. E-31
Appendix............................................ A-1
Tone List ..................................................................... A-1
Song List ..................................................................... A-1
MIDI Implementation Chart
Company and product names used in this manual may
be registered trademarks of others.
E-2
General Guide
21 3 4 5 6 8 97
bk bl bm bn
bo
Bottom
Back
Installing the Music Stand
Insert the bottom of the music stand into the groove
on the top of the digital piano’s console.
General Guide
E-3
English
NOTE
The names shown here are always indicated in bold when they appear within the text of this manual.
The FUNCTION button is used when configuring a variety of different digital piano settings. The following are
FUNCTION button basics.
z To change a setting, hold down the FUNCTION button as you press the
keyboard key that is assigned the setting you want to select.
An operation confirmation tone will sound whenever you press a
keyboard key to configure a setting.
Example: “To select a tone” on page E-8
NOTE
For details about operations and settings, see “Configuring Settings with
the Keyboard” on page E-20.
z The following table shows how pressing the FUNCTION button changes the operation of certain buttons.
Your digital piano lets you save its current settings and lock its buttons to protect against operation errors. For
details, see “Parameter List” on pages E-22 - E-24.
FUNCTION Button
This button: Does this while FUNCTION button is depressed:
SONG a Starts and stops demo tune play.
RECORDER Selects the left-hand part and the right-hand part.
METRONOME Toggles Duet on and off.
Saving Settings and Using Operation Lock
1 P (POWER) button
2 VOLUME controller
3 FUNCTION button
4 SONG a, DEMO button
5 RECORDER (L/R) button
6 METRONOME, DUET button
7 GRAND PIANO (CONCERT) button
8 GRAND PIANO (MODERN) button
9 ELEC PIANO button
bk USB port
bl DAMPER PEDAL jack
bm DC 12V terminal
bn PHONES jacks
bo Pedal connector
E-4
Power Outlet
Your digital piano runs on standard household power.
Be sure to turn off power whenever you are not using
the digital piano.
Use only the AC adaptor (JEITA Standard, with unified
polarity plug) that comes with this digital piano. Use of
a different type of AC adaptor can cause malfunction
of the digital piano.
Specified AC Adaptor: AD-A12150LW
Use the supplied power cord to connect the AC
adaptor as shown in the illustration below.
Note the following important precautions to avoid
damage to the power cord.
During Use
Never pull on the cord with excessive force.
Never repeatedly pull on the cord.
Never twist the cord at the base of the plug or
connector.
During Movement
Before moving the digital piano, be sure to unplug
the AC adaptor from the power outlet.
During Storage
Loop and bundle the power cord, but never wind it
around the AC adaptor.
IMPORTANT!
Never connect the AC adaptor (JEITA Standard,
with unified polarity plug) that comes with this digital
piano to any other device besides this piano. Doing
so creates the risk of malfunction.
Make sure the digital piano is turned off before
plugging in or unplugging the AC adaptor.
The AC adaptor will become warm to the touch after
very long use. This is normal and does not indicate
malfunction.
1.
Press the P (POWER) button to turn on
digital piano power.
This causes the P (POWER) button to light.
When you turn on the digital piano, it performs a
power up operation in order to initialize its system.
During system initialization the tone button lamps
cycle on and off in the sequence for about five
seconds to let you know that system initialization is
in progress.
2.
To turn off the digital piano, hold down the P
(POWER) button until its light goes out.
NOTE
Pressing the P (POWER) button to turn off power
actually puts the digital piano into a standby state.
Minute amounts of current continue to flow within
the digital piano in the standby state. If you do not
plan to use the digital piano for a long time or if
there is a lightning storm in your area, be sure to
unplug the AC adaptor from the power outlet.
Using an AC Adaptor
Household power outlet
Power cord
DC 12V terminal
AC adaptor
Configuration and type depends
on your geographic location.
Turning Power On or Off
English
Power Outlet
E-5
Auto Power Off
This digital piano is designed to turn off automatically
to avoid wasting power after no operation is
performed for a preset amount of time. The Auto
Power Off trigger time is about four hours.
You also can use the procedure below to temporarily
suspend Auto Power Off.
To disable Auto Power Off
1.
While the digital piano is turned on, press the
P (POWER) button to turn it off.
2.
While holding down the FUNCTION button,
press the P (POWER) button to turn on the
digital piano.
Auto Power Off will be disabled at this time.
NOTE
Turning off the digital piano after performing the
above steps will re-enable Auto Power Off.
E-6
Connections
IMPORTANT!
Whenever connecting something to the digital piano,
first use the VOLUME controller to set the volume to
a low level. After connecting, you can adjust the
volume to the level you want.
Connecting headphones to either of the PHONES jack
cuts off output to the speakers, which means you can
practice even late at night without bothering others. To
protect your hearing, make sure that you do not set the
volume level too high when using headphones.
NOTE
Be sure to push the headphones plug into the
PHONES jacks as far as it will go. If you don’t, you
may hear sound from only one side of the
headphones.
If the plug of the headphones you are using does not
match the PHONES jacks, use the applicable
commercially available adaptor plug.
If you are using headphones that require an adaptor
plug, make sure you do not leave the adaptor
plugged in when you unplug the headphones. If you
do, nothing will sound from the speakers when you
play.
You can connect audio equipment or a music amplifier
to the digital piano and then play through external
speakers for more powerful volume and better sound
quality.
Connecting Audio Equipment (Figure 1)
Use commercially available connecting cords
(Standard Plug × 1, Pin Plugs × 2) to connect as shown
in Figure 1. Make sure that the end of the cord that
you connect to the digital piano is a stereo standard
plug. A monaural standard plug will result in output of
only one of the two stereo channels. Normally, you
should set the input selector of the audio equipment to
the terminal where the digital piano is connected (AUX
IN, etc.) Adjust volume using the digital piano’s
VOLUME controller.
Connecting a Music Amplifier (Figure 2)
Connect the connecting cord* to one of the types of
amplifiers shown in Figure 2.
Adjust volume using the digital piano’s VOLUME
controller.
Connecting Headphones
Stereo standard plug
PHONES jacks
Back
Connecting Audio Equipment
or an Amplifier
* Digital Piano: Stereo standard plug
Amplifier : Inputs signals for the left and right
channels. Not connecting either plug
will result in output of only one of the
two stereo channels.
INPUT 1
INPUT 2
Audio amplifier AUX IN jack, etc.
Guitar amplifier
Keyboard amplifier, etc.
Pin plug
Pin jack Standard plug
RIGHT (Red)
To either of the digital piano’s PHONES jack
Stereo standard plug
Pin plug (red)
Pin plug (white)
LEFT (White)
English
Connections
E-7
Connecting the supplied pedal (SP-3) to the DAMPER
PEDAL jack makes it possible to use the pedal as a
damper pedal.
Pressing the damper pedal while playing will cause the
notes you play to reverberate for a long time.
When a GRAND PIANO tone (CONCERT,
MODERN, CLASSIC, MELLOW, BRIGHT) is
selected as the tone, pressing this pedal will cause
notes to reverberate just like the damper pedal on an
acoustic grand piano.
Pedal Connector
You can connect the optionally available 3-Pedal Unit
(SP-33) to the pedal connector on the bottom of the
digital piano. You can then use the pedals for
expression that is similar to that available on an
acoustic piano.
SP-33 Pedal Functions
z Damper Pedal
In addition to the damper pedal functions described in
the column to the left, the SP-33 pedal also supports
half-pedal operation, so pressing the pedal part way
applies only a partial damper effect.
z Soft Pedal
Pressing this pedal suppresses notes played on the
keyboard after the pedal was pressed, and makes them
sound softer.
z Sostenuto Pedal
Only the notes that are played while this pedal are
depressed are sustained until the pedal is released.
NOTE
The optional CS-67P stand is required in order to use
the SP-33 Pedal Unit.
Use only accessories that are specified for use with this
digital piano.
Use of unauthorized accessories creates the risk of fire,
electric shock, and personal injury.
NOTE
You can get information about accessories that are
sold separately for this product from the CASIO
catalog available from your retailer, and from the
CASIO website at the following URL.
http://world.casio.com/
Connecting a Pedal
DAMPER PEDAL jack
SP-3
Back
Pedal connector
Bottom
Bundled and Optional
Accessories
Soft Pedal
Sostenuto Pedal
Damper Pedal
E-8
Playing with Different Tones
The piano comes with 18 built-in tones.
The names of the tones are marked above the keyboard keys to which they are assigned.
To select a tone
1.
Select the tone you want.
2.
Use the VOLUME controller to adjust the volume.
Selecting and Playing a Tone
SONG a
FUNCTION
METRONOME ELEC PIANO
GRAND PIANO
VOLUME
z To select GRAND PIANO (CONCERT or
MODERN) or ELEC PIANO
Press one of the GRAND PIANO buttons
(CONCERT or MODERN) or the ELEC PIANO
button to select the one you want.
The button lamp of the selected tone will light.
z To select one of the other tones
While holding down the FUNCTION button,
press the keyboard key that corresponds to the
tone you want to select.
English
Playing with Different Tones
E-9
NOTE
Of the digital piano’s 18 built-in tones, the first five
are grand piano tone. Each tone has its own
distinctive merits, so you should select the tone that
suits the song you are playing along with or your
own personal preferences. The CONCERT and
MODERN tones are assigned to buttons for quick
and easy selection.
* Feature that applies computer morphing
technology to enable seamless changes between
sounds sampled at various dynamics from a full
concert grand piano.
Bass Tones (BASS 1, BASS 2)
Selecting either of the two BASS (LOWER) tones (1 or
2) in step 1 of the above procedure will assign the
selected bass tone to the low range (left side) of the
keyboard. The high range (right side) will be assigned
the tone that was selected when you pressed the
BASS 1 or BASS 2 key.
BASS 1 and BASS 2 let you effectively split the
keyboard between two different tones.
NOTE
To return the keyboard to a single tone, select any
tone other than BASS 1 or BASS 2.
You cannot select BASS 1 or BASS 2 when recording
to Track 2.
Tone Name Characteristics
CONCERT This is a full concert grand piano tone
that uses Linear Morphing* for
dynamic and natural tone changes.
This tone is designed to reproduce
damper, resonance, and other piano
nuances, which makes it ideal for
virtually any type of piano
performance.
MODERN This tone provides a bright grand piano
sound. The volume and timbre of this
tone is quick to respond to different
keyboard pressures, and it has
relatively deep reverb. This tone is a
good choice for dynamic and lively
performances.
CLASSIC This is a natural piano tone that closely
resembles the sound of an acoustic
piano. Though reverb and other flashy
effects are subdued for this tone,
resonance is more pronounced, which
enables expression of delicate nuances.
This tone is a good choice for lesson
and practice sessions.
MELLOW Warm and mellow piano tone
BRIGHT Bright and clear piano tone
Split Point
Low Range High Range
BASS 2 PIPE ORGAN
(Currently selected tone.)
E-10
Playing with Different Tones
Use the following procedure to layer two tones, so they
sound at the same time.
When specifying two tones for layering, first tone you
select will be the main tone, while the second tone will
be the layered tone.
1.
While holding down the FUNCTION button,
press down the keyboard key for the first tone
you want to layer and then the key for the
second tone.
Example:
First press the
HARPSICHORD
key and then
the
ELEC ORGAN 1
key.
2.
To unlayer the keyboard, select another tone
by pressing the GRAND PIANO button or by
using the procedure under “Selecting and
Playing a Tone” (page E-8).
NOTE
You cannot layer the BASS 1 or BASS 2 tone with
another tone.
You cannot perform the layer operation when
recording to Track 2.
To adjust the volume balance between
two layered tones
1.
While holding down the FUNCTION button,
use the keyboard keys shown below to adjust
the volume of the layered tones.
To return the volume setting to its initial default, hold
down the FUNCTION button and press both of the
keys at the same time.
Layering Two Tones
HARPSICHORD
ELEC ORGAN 1
C1 C2 C3 C4 C5 C6 C7 C8
Initial default (Center)
Volume of the main tone
(First tone you selected)
Volume of the layered tone
(Second tone you selected)
English
Playing with Different Tones
E-11
1.
While holding down the FUNCTION button,
use the Reverb or Chorus keyboard key to
cycle through the available settings.
Each press of the Reverb or Chorus keyboard key
causes the digital piano to beep according to which
setting is selected, as shown in the table below.
Reverb
Chorus
About DSP
DSP makes it possible to digitally produce complex
acoustic effects. The DSP is assigned to each tone
whenever you turn on digital piano power.
1.
Press the METRONOME button.
This starts the metronome.
The lamp above the SONG a button flash in time
with the metronome beat.
2.
To change the beat, hold down the
FUNCTION button as you press one of the
METRONOME BEAT keys to select a beat
setting.
You can specify beats per measure value of 0, 2, 3, 4,
5, or 6. Specifying 0 as the setting plays a straight
click, without any chime. This setting lets you
practice with a steady beat.
3.
While holding down the FUNCTION button,
use the TEMPO keys to specify a tempo
value in the range of 20 to 255 beats per
minute.
Each press of the + or – key raises or lowers the
tempo value by 1.
You can use the value input keys (0 to 9) to enter a
specific three-digit. Be sure to input all three digits.
Example: To enter “96”, press keys 0, 9, 6.
Using Effects
Reverb : Makes your notes resonate.
Chorus: Adds more breadth to your notes.
Number of Beeps Setting
1 (long)
1 (short)
2
3
4
Off (OFF)
Room
Small Hall
Large Hall
Stadium
Number of Beeps Setting
1 (long)
1 (short)
2
3
4
Off (OFF)
Light Chorus
Medium Chorus
Deep Chorus
Flanger (whooshing effect)
ChorusReverb
Using the Metronome
E-12
Playing with Different Tones
4.
Press the METRONOME button or SONG
a button to turn off the metronome.
NOTE
To return the tempo setting to the default tempo of
the currently selected Music Library tune, press the
+ and – keys at the same time in step 3. Pressing +
and – while recording will return the tempo value to
120.
To adjust the metronome volume
You can perform the following procedure at any time,
regardless of whether or not the metronome is
sounding.
1.
While holding down the FUNCTION button,
use the METRONOME VOLUME keys to
specify a volume value in the range of 0 to 42.
For details about using the keyboard keys for
settings, see “Keyboard Keys Used for Configuring
Settings” on page E-21.
Each press of the T or S key raises or lowers the
metronome volume value by 1.
NOTE
To return to the initial default setting, press T and
S at the same time.
You can use the Duet Mode to split the piano’s
keyboard in the center so two people can play a duet.
This makes it possible to configure the keyboard so, for
example, the teacher can play on the left and the
student can follow along on the right. Or one person
can play the left hand part on the left, while another
plays the right hand part on the right.
Pedal Operation when Playing a Duet
z Optional SP-33 Pedal Unit
NOTE
Only the damper pedal for the right side keyboard
supports half-pedal operations.
z Supplied SP-3 Pedal Unit
To use the SP-3 Pedal Unit as the right keyboard
damper pedal, connect it to the DAMPER PEDAL jack.
Half-pedal operation is not supported in this case.
1.
Select the piano tone you want to use for the
duet.
Example: GRAND PIANO (MODERN)
2.
While holding down the FUNCTION button,
press the METRONOME button to toggle
duet on and off.
IMPORTANT!
You cannot use the Duet Mode while recording
(page E-16).
Playing a Piano Duet
C3 C4 C5 C6 C3 C4 C5 C
6
Keyboard
Split point
Left keyboard Right keyboard
(middle C)(middle C)
Left side damper pedal
Left and right side
damper pedal
Right side damper pedal
(Half-pedal operation
supported)
English
Playing with Different Tones
E-13
Changing the Octaves of the duet
keyboards
You can change the ranges of the left and right
keyboards in octave units from their initial default
settings. This comes in handy, for example, if the initial
default range is not enough when one person is
playing the left hand part and another person is
playing the right hand part.
1.
While holding down the FUNCTION and
METRONOME buttons, press the keyboard C
key that you want located at C4 (middle C) of
the left keyboard.
Example: Press the keyboard key of the leftmost C (C4)
will assign the range shown below.
2.
While holding down the FUNCTION and
METRONOME buttons, press the keyboard C
key that you want located at C4 (middle C) of
the right keyboard.
NOTE
You can return the keyboards to their initial default
ranges by exiting and then re-entering the Duet
Mode.
C4 C5 C6 C7 C3 C4 C5 C6
Left keyboard Right keyboard
(Pressed key)
1 octave higher than initial
setting
Unchanged
E-14
Playing Back Built-in Songs
Your digital piano comes with a Music Library of 60
built-in tunes. You can play all 60 tunes in sequence,
from beginning to end.
IMPORTANT!
After you select a built-in song, it can take a number
of seconds for the song data to be loaded. While the
data is being loaded, the keyboard keys and button
operations will be disabled. If you are playing
something on the keyboard, the following operation
will cause output to stop.
1.
While holding down the FUNCTION button,
press the SONG a button.
This will start repeat demo playback of the built-in
songs in sequence, from 01 through 60.
You can play along with a song on the keyboard as it
is playing. The tone assigned to the keyboard is the
one that is preset for the song that is playing.
2.
To change demo playback to a different song,
hold down the FUNCTION button as you use
the SONG SELECT keys to specify a song
number.
Each press of the + or – key raises or lowers the song
number by 1.
You can use the value input keys (0 to 9) to enter a
specific two-digit song number. Be sure to input both
digits.
Example: To select song 08, enter 0 and then 8.
3.
Press the SONG a button again to stop
built-in song play.
NOTE
The tune selection and playback stop operations
described above are the only operations that are
possible during demo tune play.
SONG a
FUNCTION
RECORDER
Playing Back All of the Built-in
Songs
English
Playing Back Built-in Songs
E-15
The Music Library includes both built-in songs (01 to
60), plus songs (61 to 70) that have been saved to digital
piano memory from a computer*. You can use the
procedure below to select one of these songs and play it
back.
* You can download music data from the Internet and
then transfer it from your computer to digital piano
memory. See “Transferring Song Data with a
Computer” on page E-26 for more information.
1.
Find the song number of the song you want to
play in the song list on page A-1.
2.
To change to another song, hold down the
FUNCTION button as you use the SONG
SELECT keys to specify a song number.
For information about how to perform this step, see
the note under step 2 of the procedure under
“Playing Back All of the Built-in Songs” on page E-14.
3.
Press the SONG a button.
This starts the playback of the song.
4.
To stop playback, press the SONG a
button again.
Playback will stop automatically when the end of the
song is reached.
NOTE
Pressing the + and – keys at the same time will select
song number 01.
You also can adjust the playback tempo and volume
of the song. See “Configuring Settings with the
Keyboard” on page E-20 for more information.
You can turn off the left hand part or right hand part of
a song and play along on the piano.
NOTE
The Music Library includes a number of duets.
While a duet is selected, you can turn off the first
piano <Primo> or second piano <Secondo> tone
and play along with the song.
PREPARATION
Select the song you want to practice and adjust the
tempo. See “Configuring Settings with the
Keyboard” on page E-20.
A number of tunes have tempo changes part way
through in order to produce specific musical effects.
1.
While holding down the FUNCTION button,
press the RECORDER (L/R) button to select
the part you want to turn off.
Pressing a button toggles its part on (button lamp on)
and off (button lamp off).
2.
Press the SONG a button.
This starts playback, without the part you turned off
in step 1.
3.
Play the missing part on the keyboard.
4.
To stop playback, press the SONG a
button again.
Playing Back a Specific Music
Library Song
Practicing with a Music Library
Song
Left hand Right hand
Both parts on
Right hand
part off
Left hand
part off
E-16
Recording and Play Back
You can store the notes you play in digital piano
memory for later playback.
A track is a container of recorded data, and a song
consists of two tracks: Track 1 and Track 2. You can
record each track separately and then combine them so
they play back together as a single song.
Memory Capacity
You can record approximately 5,000 notes in digital
piano memory.
The RECORDER button lamp will flash at high
speed when memory runs low.
Recording stops automatically if the number of
notes in memory exceeds the maximum.
Recorded Data
Keyboard play
Tone used
Pedal operations
Reverb and chorus settings (Track 1 only)
Tempo setting (Track 1 only)
Layer setting (Track 1 only)
Split setting (Track 1 only)
Temperament and base note settings (Track 1 only)
Octave shift setting (Track 1 only)
Recording Data Storage
Starting a new recording deletes any data that was
previously recorded in memory.
If power to the Digital Piano is cut off while
recording is in progress, everything you recorded up
to that point will be deleted. Take care so power is
not turned off accidentally during recording
operations.
IMPORTANT!
CASIO COMPUTER CO., LTD. takes no
responsibility for any damages, lost profits, or claims
by third parties arising from the deletion of recorded
data due to malfunction, repair, or for any other
reason.
Using the RECORDER Button
Each press of the RECORDER button cycles through
the recording options in the sequence shown below.
SONG a
FUNCTION
RECORDER
METRONOME
Tracks
Track 1 Record
While playing
back. . .
Track 2 Record
Song
Lit Flashing Off
Playback
Standby
Record
Standby
Normal
English
Recording and Play Back
E-17
After recording to either of the tracks of a song, you can
record to the other track while listening to playback
what you recorded in the first track.
1.
Press the RECORDER button twice so its
lamp is flashing.
At this time the L lamp will flash to indicate that the
digital piano is standing by for recording to Track 1.
2.
To change the recording track, hold down the
FUNCTION button as you press the
RECORDER (L/R) button.
Make sure that the indicator lamp for the record track
is flashing.
Track 1: L lamp
Track 2: R lamp
Example: Track 1 selected
3.
Select the tone and effects (Track 1 only) you
want to use in your recording.
Tone (page E-8)
Effects (page E-11)
NOTE
If you want the metronome to sound while you are
recording, configure the beat and tempo settings,
and then press the METRONOME button. See
“Using the Metronome” on page E-11 for more
information.
4.
Start playing something on the keyboard.
Recording will start automatically.
5.
To stop recording, press the SONG a
button.
This will cause the RECORDER button lamp and the
lamp of the track you recorded to change from
flashing to lit.
To play back the track you just recorded, press the
SONG a button.
6.
After you are finished recording or playing
back, press the RECORDER button so its
lamp goes out.
To record to a specific track of
a song
E-18
Recording and Play Back
1.
Press the RECORDER button so its lamp is
lit.
2.
While holding down the FUNCTION button,
press the RECORDER (L/R) button to select
the track you want to play back while
recording.
3.
Press the RECORDER button so its lamp is
flashing.
This will cause the L lamp to flash.
4.
While holding down the FUNCTION button,
press the RECORDER (L/R) button to select
the track you want to record.
Make sure that the indicator lamp for the record track
is flashing.
Example: To listen to playback of Track 1 as you record
to Track 2
5.
Select the tone and effects (Track 1 only) you
want to use for your recording.
6.
Press the SONG a button or play
something on the keyboard.
This will start both playback of the recorded track
and recording to the other track.
7.
To stop recording, press the SONG a
button.
1.
Press the RECORDER button so its lamp is
lit.
NOTE
When a song has something recorded in both tracks,
you can turn off one track and play back just the
other track, if you want.
2.
Press the SONG a button.
This starts playback of the song and/or track you
selected.
NOTE
You can change the tempo setting as a track is
playing.
Press the SONG a button again to stop playback.
To record to one track of a
song while listening to the
playback of the other track
Lit (Play) Flashing (Record Standby)
Playing Back from Digital
Piano Memory
English
Recording and Play Back
E-19
The following procedure deletes a specific track of a
song.
IMPORTANT!
The procedure below deletes all of the data of the
selected track. Note that the delete operation cannot
be undone. Check to make sure you really do not
need the data in digital piano memory before you
perform the following steps.
1.
Press the RECORDER button twice so its
lamp is flashing.
2.
While holding down the FUNCTION button,
press the RECORDER (L/R) button to select
the track you want to delete.
3.
Press the RECORDER button until its lamp is
lit.
This will cause the lamp of the track you selected in
step 2 of this procedure to flash.
Example: If you selected Track 2 for deletion
4.
Once again, hold down the FUNCTION
button as you press the RECORDER (L/R)
button.
This deletes the selected track and enters playback
standby.
To cancel the delete operation at any time, press the
RECORDER button twice so its lamp is unlit.
NOTE
Only the digital piano’s RECORDER (L/R) button is
operational from step 3 until you actually perform
the delete operation in step 4. No other button
operation can be performed.
Deleting Recorded Data
Off Flashing: Delete standby
E-20
Configuring Settings with the Keyboard
In addition to selecting tones and Music Library tunes,
you also can use the FUNCTION button in
combination with the keyboard keys to configure
effect, keyboard touch, and other settings.
1.
Use the “Parameter List” on pages E-22 -
E-24 to find the setting you want to configure,
and note its details.
2.
Use “Keyboard Keys Used for Configuring
Settings” on page E-21 to find the location on
the keyboard for configuring the setting you
want.
3.
While holding down the FUNCTION button,
press the keyboard key for the setting you
want to configure.
The digital piano will sound an operation tone after it
configures the setting.
Example: To lower the transpose setting by one
semitone
4.
Release the FUNCTION button to complete
the setting procedure.
NOTE
You can configure the digital piano so no operation
tone sounds in step 3. For details, see “
bt
Operation
Tone” under “Parameter List” on pages E-22 - E-24.
Keyboard Setting Operation Types
There are four types of operations that you can perform
while configuring settings with the keyboard keys:
Type A, Type B, Type C, and Type D.
Example: Pressing the STRINGS keyboard key to select the
STRINGS 1 tone
Holding down a key raises or lowers the setting at
high speed.
To return to the initial default setting, press both
keys at the same time.
Example: To enter “120”, press keys 1, 2, 0.
When you press a key, the digital piano will beep to
let you know which setting is selected.
A long beep indicates that the applicable setting is
turned off.
Example: While reverb is turned off, pressing the Reverb
keyboard key twice will cause the digital piano
to beep twice, which indicates that the Small Hall
setting is selected.
NOTE
You can find out what operation type applies to each
setting by checking the “Operation Type” in the
“Parameter List” on pages E-22 - E-24.
FUNCTION
To configure settings with the
keyboard
Transpose T key
Type A: Direct input
Type B: Raising or lowering a setting using the + and
– or T and S keyboard keys
Type C: Value input using the numeric keys (0 to 9)
Type D: Toggling or cycling through settings by
pressing a keyboard key
Configuring Settings with the Keyboard
E-21
English
The numbers 1 through cl correspond to the same numbers in the “Parameter List” on pages E-22 - E-24.
Keyboard Keys Used for Configuring Settings
 

+

OFF
/
ON
OFF
/
ON
OFF
/
ON
OFF
/
ON
[Left keyboard]
[Overall]
[Center keyboard]
[Right keyboard]
5
Tempo/Temperament select
bm
Song volume
bo
Brilliance
bn
Metronome volume
1
Keyboard key (Transpose)
2
Keyboard tuning (Tuning)
3
Octave shift
6
Song select/Base note
7
Tone selection
bp
USB device mode
bq
Layer balance
bl
Touch response
br
Send channel
bs
Local control
bt
Operation tone
ck
Back up
cl
Operation lock
4
Temperament
bk
Metronome beat
8
Reverb
9
Chorus
E-22
Configuring Settings with the Keyboard
Tones
Song/Metronome
Parameter List
Parameter Settings
Operation
Type
(page E-20)
Description Remarks
7
Tone selection See page E-8.
Default: GRAND
PIANO
(CONCERT)
A Assigns a tone to the keyboard.
(page E-8)
8
Reverb Off (OFF), 1 to 4
Default: 2
D Specifies the reverb of notes.
(page E-11)
9
Chorus Off (OFF), 1 to 4
Default: 2
D Controls the breadth of notes.
(page E-11)
bo
Brilliance –3 to 0 to 3
Default: 0
B Specifies the brilliance of notes.
Pressing [+] makes notes brighter
and harder. Pressing [–] makes
notes mellower and softer.
To return the setting to its initial default (0),
press [+] and [–] at the same time.
bq
Layer balance –24 to 0 to 24
Default: 0
B Specifies the volume balance
between the main tone and the
layered tone. (page E-10)
Parameter Settings
Operation
Type
(page E-20)
Description Remarks
5
Tempo (TEMPO) 20 to 255
Default: 120
B (+/–)
C (0 to 9)
Specifies the tempo of Music
Library songs, the metronome,
recording and playback, etc.
(page E-11)
Always enter three digits when using the
number keys (0 to 9) to input a value.
Example: To input 90, enter 0, 9, 0 (leading
zero required).
During recording, pressing + and – at the
same time sets a value of 120.
6
Song select
(SONG SELECT)
01 to 70
Default: 01
B (+/–)
C (0 to 9)
Selects a Music Library tune.
(page E-15)
Always enter two-digits when using the
number keys (0 to 9) to input a value.
Example: To input 8, enter 0, 8 (leading
zero required).
This setting cannot be changed while
recording.
bm
Song volume 00 to 42
Default: 42
B Sets the volume level of Music
Library playback.
This setting cannot be changed while
recording.
bk
Metronome beat
(METRONOME
BEAT)
0, 2, 3, 4, 5, 6
Default: 4
A Specifies the metronome beat.
(page E-11)
The metronome beat setting cannot be
changed while playback of a Music Library
tune is in progress.
bn
Metronome
volume
00 to 42
Default: 36
B Specifies the metronome volume.
(page E-12)
Configuring Settings with the Keyboard
E-23
English
Keyboard
Parameter Settings
Operation Type
(page E-20)
Description Remarks
1
Keyboard key
(Transpose)
–12 to 0 to 12
Default: 0
B Raises or lowers the tuning of
the digital piano in semitone
steps.
The transpose setting cannot be
configured while Music Library
playback is in progress or while in
the Duet Mode.
Raising the key of the digital piano
can cause notes the highest part of
the range to become distorted.
2
Keyboard tuning
(Tuning)
415.5Hz to 440.0Hz
to 465.9Hz
Default: 440.0Hz
B Raises or lowers the overall
pitch of the digital piano in
0.1Hz steps from the standard
pitch of A4 = 440.0Hz.
The pitch setting cannot be changed
while playback of a Music Library
tune is in progress.
3
Octave shift –2 to 0 to 2
Default: 0
B Change the range of the
keyboard in octave units.
You can configure octave shift
settings for the main tone part and
layered tone part.
You cannot configure octave shift
settings for split tone parts.
4
5
6
Temperament
Temperament
select
Temperament
Base note
Temperament:
00 to 16
Base note:
–, +, 0 to 9 (C to B)
Defaults:
Temperament: 00
(Equal Temperament)
Base note
: C
Hold down
FUNCTION as you
press each of the
following keyboard
keys.
1. TEMPERAMENT
(
4
)
2. TEMPERAMENT
SELECT (
5
)
3. BASE NOTE (
6
)
You can change the scale
(tuning system) of the
keyboard from standard equal
temperament to another tuning
that is more suitable for
playing Indian music, Arabic
music, classical pieces, etc.
<Temperaments>
00: Equal / 01: Pure Major / 02: Pure
Minor / 03: Pythagorean /
04: Kirnberger 3 / 05: Werckmeister /
06: Mean-Tone / 07: Rast / 08: Bayati /
09: Hijaz / 10: Saba / 11: Dashti /
12: Chahargah / 13: Segah /
14: Gurjari Todi / 15: Chandrakauns /
16: Charukeshi
<Base notes>
–: C / +: C
#
/ 0: D / 1: E
b
/ 2: E / 3: F /
4: F
#
/ 5: G / 6: A
b
/ 7: A / 8: B
b
/ 9: B
bl
Touch response
(TOUCH
RESPONSE)
Off (OFF), 1 to 3
Default: 2
A Specifies the relative touch of
the keyboard keys.
Setting a smaller value causes
lighter touch to produce more
powerful sound.
E-24
Configuring Settings with the Keyboard
MIDI and Other Settings
Parameter Settings
Operation
Type
(page E-20)
Description Remarks
bp
USB device
mode
MIDI, Storage
Default: MIDI
The digital piano enters MIDI
mode automatically when it is
connected to a computer by a USB
cable. Select storage when saving
Recorder memory song data to a
computer or when loading
computer song data to digital
piano memory. (page E-26)
While Storage is selected for this setting, the
GRAND PIANO (CONCERT, MODERN)
and ELEC PIANO button lamps flash, and
all other lamps are unlit.
All digital piano operations are disabled at
this time.
Each press of the USB device mode
keyboard key toggles between the MIDI
and storage modes.
br
Send channel 01 to 16
Default: 01
B Specifies one of the MIDI channels
(1 through 16) as the Send channel,
which is used for sending MIDI
messages to an external device.
bs
Local control Off, On
Default: On
D Selecting “Off” for Local control
cuts off the digital piano’s sound
source, so no sound is produced by
the digital piano when keys are
pressed.
The Local control setting cannot be changed
while playback of a Music Library tune is in
progress.
bt
Operation tone Off, On
Default: On
D Selecting “Off” disables sounding
of the operation tone whenever a
keyboard key is pressed while the
FUNCTION is depressed.
This setting is retained even when the
digital piano is turned off.
The operation tone setting cannot be
changed while Music Library playback is in
progress, while the metronome is
sounding, and during recording.
ck
Back up Off, On
Default: Off
D When “On” is selected for this
setting, the digital piano will
remember its current settings
*1
,
and restore them when it is turned
on again.
When “Off” is selected, settings
*2
are reset to their initial defaults
whenever the digital piano is
turned on.
The back up setting cannot be changed
while Music Library playback is in
progress, while the metronome is
sounding, in the Duet Mode, and during
recording.
*1
The following settings are not remembered.
•Duet Mode
•Tune LR (part)
•Local control
*2
Except for the operation tone on/off
setting.
cl
Operation lock Off, On
Default: Off
D Selecting “On” for this setting locks
the digital piano’s buttons (except
for the power button and the
buttons required for unlock), so no
operation can be performed.
Turn on operation lock when you
want to protect against
unintentional button operations.
The operation lock setting cannot be
changed while Music Library playback is in
progress, while the metronome is
sounding, and during recording.
E-25
English
Connecting to a Computer
You can connect the digital piano to a computer and
exchange MIDI data between them. You can send play
data from the digital piano to commercially available
music software running on your computer, or you can
send MIDI data from your computer to the digital
piano for playback.
The following shows the minimum computer system
requirements for sending and receiving MIDI data.
Check to make sure that your computer complies with
these requirements before connecting the digital piano
to it.
z Operating System
Windows
®
XP (SP2 or later)
*1
Windows Vista
®
*2
Windows 7
®
*3
Mac OS
®
X
(10.3.9, 10.4.X, 10.5.X, 10.6.X, 10.7.X)
z USB port
IMPORTANT!
Never connect to a computer that does not conform
to the above requirements. Doing so can cause
problems with your computer.
IMPORTANT!
Make sure you follow the steps of the procedure
below exactly. Connecting incorrectly can make data
send and receive impossible.
1.
Turn off the digital piano and then start up
your computer.
Do not start up the music software on your computer
yet!
2.
After starting up your computer, use a
commercially available USB cable to connect
it to the digital piano.
3.
Turn on the digital piano.
If this is the first time you are connecting the digital
piano to your computer, the driver software required
to send and receive data will be installed on your
computer automatically.
4.
Start up commercially available music
software on your computer.
5.
Configure the music software settings to
select one of the following as the MIDI device.
For information about how to select the MIDI device,
see the user documentation that comes with the
music software you are using.
IMPORTANT!
Be sure to turn on the digital piano first before
starting up your computer’s music software.
NOTE
Once you are able to connect successfully, there is no
problem with leaving the USB cable connected when
you turn off your computer and/or digital piano.
For detailed specifications and connections that
apply to MIDI data send and receive by this digital
piano, see the latest support information provided
by the website at the following URL.
http://world.casio.com/
Minimum Computer System
Requirements
*1: Windows XP Home Edition
Windows XP Professional (32-bit)
*2: Windows Vista (32-bit)
*3: Windows 7 (32-bit, 64-bit)
Connecting the Digital Piano
to Your Computer
CASIO USB-MIDI : (For Windows Vista, Windows 7,
Mac OS X)
USB Audio Device: (For Windows XP)
Computer USB port
A connector
Digital Piano USB port
B connector
USB cable
(A-B type)
E-26
Connecting to a Computer
What is MIDI?
The letters MIDI stand for Musical Instrument Digital
Interface, which is the name of a worldwide standard
for digital signals and connectors that makes it possible
to exchange musical data between musical instruments
and computers (machines) produced by different
manufacturers.
NOTE
For detailed information about MIDI
Implementation, visit the CASIO website at:
http://world.casio.com/
.
See “Send channel” and “Local control” on page E-24.
Use the procedures in this section to transfer Recorder
memory data to a computer for storage, and to load
songs to user song memory (Music Library 61 to 70).
IMPORTANT!
Turning off the Digital Piano while it is exchanging
data with a computer can cause data in Digital Piano
memory to become corrupted. If this happens, a
memory format operation will start the next time you
turn on the Digital Piano. Note that it takes about 20
seconds for the format operation to finish, and you
will not be able to perform any operation during that
time.
1.
Perform steps 1 through 3 of the procedure
under “Connecting the Digital Piano to Your
Computer” on page E-25.
2.
Change the digital piano’s USB device mode
to storage.
While holding down the FUNCTION button, press
the keyboard key that corresponds to the USB device
mode (page E-21).
After this setting is changed, the GRAND PIANO
(CONCERT, MODERN) and ELEC PIANO button
lamps flash, and all other lamps are unlit.
See “USB device mode” on page E-24 for more
information.
3.
On your computer, perform the required
operation to display your computer’s storage
devices.
The memory of this digital piano will appear as
“PIANO” under “Devices with Removable Storage”.
Using MIDI
Transferring Song Data with a
Computer
If your computer is
running this operating
system:
Do this:
Windows XP Double-click “My Computer”.
Windows Vista,
Windows 7
Double-click “Computer”.
Mac OS Skip step 3 and double-click
“PIANO” on your Mac
desktop.
English
Connecting to a Computer
E-27
4.
Double-click “PIANO”.
“PIANO” contains folders named “MUSICLIB” and
“RECORDER”.
To transfer a user song to the digital piano from your
computer, open the “MUSICLIB” folder and put the
song into one of the numbered subfolders (61
through 70). Each subfolder corresponds to a Music
Library number: Subfolder 61 to Music Library 61,
and so on.
The files in the “RECORDER” folder are songs that
have been recorded with the digital piano’s recorder
function. You can move files from the “RECORDER”
folder to another location on your computer, and you
can return recorded song files to the digital piano by
placing them into the “RECORDER” folder.
* Before starting a store or load operation, first check
the file name extension to ensure it matches the ones
shown in this column.
In the case of a song recorded with the digital
piano’s recorder function, change its file name to one
of the names and extensions shown in this column.
z The initial default configuration for Windows XP,
Windows Vista, and Windows 7 is to hide file name
extensions. Perform one of the following operations
on your computer to show file name extensions.
To show file name extensions under Windows XP
To show file name extensions under Windows Vista
or Windows 7
To load a song into user song memory
(Music Library 61 to 70)
To transfer Recorder memory data between
the digital piano and your computer
To transfer the digital piano’s current Recorder memory
data to your computer, copy the contents of the
RECORDER folder to your computer.
To return Recorder data you previously saved to your
computer back to Recorder memory, copy it back to the
RECORDER folder (and replace the current
RECORDER folder contents).
Data Type
Folder
Name
File Name and Extension
*
User songs MUSICLIB .MID: SMF format data
(format 0/1)
.CM2: CASIO original
format data
Recorder
memory data
RECORDER BIDREC01.CSR: CASIO
original format data
1. Open the folder you want.
2. On the [Tools] menu, click [Folder Options].
3. Click the [View] tab. In the [Advanced settings] list,
clear the check box next to [Hide extensions for
known file types].
4. Click [OK].
1. Open Folder Options by clicking the [Start] button,
clicking [Control Panel], clicking [Appearance and
Personalization], and then clicking [Folder Options].
2. Click the [View] tab. Under [Advanced settings]
clear the [Hide extensions for known file types]
check box.
3. Click [OK].
1. Open the MUSICLIB folder.
2. Copy the song file (.MID or .CM2) to the number-
named subfolder (61 to 70) whose name matches the
number of the Music Library location to which you
want to load the song.
If there are two files with the filename extensions
.MID and .CM2 in the MUSICLIB folder, only the
.MID data will be loaded into user song memory.
E-28
Connecting to a Computer
5.
After the file copy operation is complete,
return the USB device mode to MIDI.
If you are using a Macintosh, perform the eject
operation (drag them to the trash can).
While holding down the FUNCTION button, press
the applicable keyboard key. See “USB device mode”
on page E-24 for more information.
Returning the USB device mode to MIDI will load the
contents of MUSICLIB into user song memory and
the contents of RECORDER into Recorder memory.
IMPORTANT!
A data conversion error is indicated when both of the
SONG a button lamps, and the GRAND PIANO
(CONCERT, MODERN) and ELEC PIANO button
lamps are all lit, and all other lamps are unlit.
Copyrights
The rights of creators and copyright holders of music,
images, computer programs, databases, and other
data are protected by copyright laws. You are allowed
to reproduce such works for personal or non-
commercial use only. For any other purpose, all
reproduction (including data format conversion),
modification, transfer of reproductions, distribution
over a network, or any other use without permission
of the copyright holder exposes you to claims for
damages and criminal prosecution for copyright
infringement and violation of the author’s personal
rights. Be sure to reproduce and otherwise use
copyrighted works only in accordance with applicable
copyright laws.
E-29
English
Reference
Troubleshooting
Problem Cause Action
See
Page
No sound is produced when I
press a keyboard key.
1. The VOLUME controller is set to
“MIN”.
1. Rotate the VOLUME controller more
towards “MAX”.
) E-8
2. Headphones or an adaptor plug is
plugged into one of the PHONES
jacks.
2. Disconnect whatever is connected to the
PHONES jacks.
) E-6
3. MIDI Local control is turned off. 3. Turn on the Local control setting. ) E-24
The pitch of the digital piano
is off.
1. The digital piano’s key setting is
something other than “0”.
1. Change the key setting to “0”, or turn digital
piano power off and then back on again.
) E-23
2. Digital piano tuning is incorrect. 2. Adjust digital piano tuning, or turn the digital
piano off and then back on again.
) E-23
3. Octave shift is enabled. 3. Change the octave shift setting to 0. ) E-23
4. A non-standard temperament setting
is being used.
4. Change the temperament setting to
“00:Equal”, which is the standard modern
tuning.
) E-23
Tones and/or effects sound
strange. Turning power off
and then back on again does
not eliminate the problem.
Example:
Note intensity does
not change even though I
alter key pressure.
The “Back up” feature is turned on. Turn off “Back up”. Next, turn power off and
then back on again.
) E-24
I cannot transfer data after
connecting the digital piano
to a computer.
1. Check to make sure that the USB cable is
connected to the digital piano and
computer, and that the correct device is
selected with your computer’s music
software.
) E-25
2. Turn off the digital piano and then exit the
music software on your computer. Next,
turn the digital piano back on and then
restart the music software on your
computer.
It takes a long time before I
can use the Digital Piano after
I turn it on.
Digital Piano memory data was
corrupted because a data transfer
operation with a computer was in
progress the last time you turned off the
piano. When this happens, the Digital
Piano performs a memory format
operation the next time you turn it on.
You cannot perform any other operation
while a format operation is in progress.
It takes about 20 seconds after you turn on
power to perform the memory format
operation. Wait until the format operation is
complete. Note that you should take care to
avoid turning off the Digital Piano while a data
transfer operation with a computer is in
progress.
) E-26
A tone’s quality and volume
sounds slightly different
depending where it is played
on the keyboard.
This is an unavoidable result of the digital sampling process,
*
and does not indicate malfunction.
* Multiple digital samples are taken for the low range, middle range, and high range of the original
musical instrument. Because of this, there may be very slight differences in tonal quality and
volume between sample ranges.
When I press a button, the
note that is sounding cuts out
momentarily or there is a
slight change in how effects
are applied.
This happens when the sounds of multiple parts are sounding at the same time while using layer,
using the Duet Mode, playing back a built-in tune, recording, etc. Pressing a button when one of
these conditions exists will cause the effect setting that is built into the tone to change automatically,
which causes notes to cut out momentarily or causes a slight change in how effects are being
applied.
E-30
Reference
Specifications and designs are subject to change without notice.
Product Specifications
Model PX-150BK/PX-150WE
Keyboard 88-key piano keyboard, with Touch Response
Maximum Polyphony 128 notes
Tones 18
Layer (excluding bass tones)
Split (Low-range bass tones only)
Effects Brilliance (–3 to 0 to 3), Reverb (4 types), Chorus (4 types), DSP, Damper Resonance
Metronome Beats: 0, 2, 3, 4, 5, 6
Tempo Range: 20 to 255
Duet Adjustable tone range (–1 to 2 octaves)
Music Library Number of Songs: 60, User Songs: 10 songs (Up to approximately 65KB per song, approximately 650KB
for 10 songs)*
* Based on 1KB = 1024 bytes, 1MB = 1024
2
bytes
Song volume: Adjustable
Part On/Off: L, R
Recorder Functions: Real-time recording, playback
Number of Song: 1
Number of Tracks: 2
Capacity: Approximately 5,000 notes total
Recorded Data Protection: Built-in flash memory
Pedals Damper (Soft and sostenuto pedal operations enabled by the optional SP-33 Pedal Unit.)
Other Functions Touch Select: 3 types, Off
Transpose: 2 octaves (–12 to 0 to 12)
Tuning: A4 = 415.5Hz to 440.0Hz to 465.9Hz (variable)
Temperament
Octave shift
Operation lock
MIDI 16-channel multi-timbre receive
Inputs/Outputs PHONES jacks: Stereo standard jacks × 2
Output impedance: 3
Ω
Output Voltage: 1.5V (RMS) MAX
Power: 12V DC
USB port: TYPE B
Damper Pedal Jack: Standard jack
Pedal connector
Speakers [13cm × 6cm (rectangular)] × 2 (Output 8W + 8W)
Power Requirements AC Adaptor: AD-A12150LW
Auto Power Off: Approximately 4 hours after last operation. Auto Power Off can be disabled.
Power Consumption 12V = 18W
Dimensions 132.2 (W) × 28.6 (D) × 13.5 (H) cm (52
1
/
16
× 11
1
/
4
× 5
5
/
16
inch)
Weight Approximately 11.1kg (24.5 lbs)
English
Reference
E-31
Be sure to read and observe the following operating
precautions.
Location
Avoid the following locations for this product.
Areas exposed to direct sunlight and high humidity
Areas subjected to temperature extremes
Near a radio, TV, video deck, or tuner
The above devices will not cause malfunction of the
product, but the product can cause interference in
the audio or video of a nearby device.
User Maintenance
Never use benzine, alcohol, thinner, or other
chemical agents to clean the product.
To clean the product or its keyboard, wipe with a
soft cloth moistened in a weak solution of water and
a mild neutral detergent. Wring all excess moisture
from the cloth before wiping.
Included and Optional Accessories
Use only accessories that are specified for use with this
product. Use of unauthorized accessories creates the
risk of fire, electric shock, and personal injury.
Weld Lines
Lines may be visible on the exterior of the product.
These are “weld lines” that result from the plastic
molding process. They are not cracks or scratches.
Musical Instrument Etiquette
Always be aware of others around you whenever using
this product. Be especially careful when playing late at
night to keep the volume at levels that do not disturb
others. Other steps you can take when playing late at
night are closing the window and using headphones.
Any reproduction of the contents of this manual,
either in part or its entirety, is prohibited. Except for
your own, personal use, any other use of the
contents of this manual without the consent of
CASIO is prohibited under copyright laws.
IN NO EVENT SHALL CASIO BE LIABLE FOR
ANY DAMAGES WHATSOEVER (INCLUDING,
WITHOUT LIMITATION, DAMAGES FOR LOSS
OF PROFITS, BUSINESS INTERRUPTION, LOSS
OF INFORMATION) ARISING OUT OF THE USE
OF OR INABILITY TO USE THIS MANUAL OR
PRODUCT, EVEN IF CASIO HAS BEEN ADVISED
OF THE POSSIBILITY OF SUCH DAMAGES.
The contents of this manual are subject to change
without notice.
AC Adaptor Handling Precautions
Use a power outlet that is easily accessible so you
can unplug the AC adaptor when a malfunction
occurs or whenever else you need to do so.
The AC adaptor is intended for indoor use only. Do
not use it where it might be exposed to splashing or
moisture. Do not place any container, such as a
flower vase, that contains liquid on the AC adaptor.
Store the AC adaptor in a dry place.
Use the AC adaptor in an open, well-ventilated area.
Never cover the AC adaptor with newspaper, a table
cloth, a curtain, or any other similar item.
Unplug the AC adaptor from the power outlet if you
do not plan to use the Digital Piano for a long time.
Never try to repair the AC adaptor or modify it in
any way.
AC adaptor operating environment
Temperature: 0 to 40°C
Humidity: 10% to 90% RH
Output polarity:
Operating Precautions
E-32
Reference
AC Adaptor Handling Precautions
Model: AD-A12150LW
1. Read these instructions.
2. Keep these instructions on hand.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this product near water.
6. Clean only with a dry cloth.
7. Do not install near radiators, heat registers, stoves, or any other source of heat (including amplifiers).
8. Use only attachments and accessories specified by the manufacturer.
9. Refer all servicing to qualified service personnel. Servicing is required after any of the following occurs:
when the product is damaged, when the power supply cord or plug is damaged, when liquid is spilled into
the product, when a foreign object falls into the product, when the product is exposed to rain or moisture,
when the product does not operate normally, when the product is dropped.
10. Do not allow the product to be exposed to dripping or splashing liquid. Do not place any object containing
liquid on the product.
11. Do not allow the electrical load output to exceed the label rating.
12. Make sure the surrounding area is dry before plugging into a power source.
13. Make sure the product is oriented correctly.
14. Unplug the product during lightning storms or when you do not plan to use it for a long time.
15. Do not allow product ventilation openings to become blocked. Install the product in accordance with the
manufacturer’s instructions.
16. Take care the power cord is located where it will not be stepped upon or bent severely, particularly in
locations close to plugs and convenience receptacles, and in locations where it exits from the product.
17. The AC adaptor should be plugged into a power outlet as close to the product as possible to allow
immediate disconnection of the plug in case of emergency.
The symbol below is an alert indicating un-insulated hazardous voltage inside the product’s enclosure, which
may be sufficient to constitute the risk of electric shock to users.
The symbol below is an alert indicating the presence of important operating and maintenance (servicing)
instructions in the documentation that accompanies the product.
*
A-1
Appendix/Apéndice
Tone List/Lista de tonos
Tone Name/
Nombre de tonos
Program Change/
Cambio de programa
Bank Select MSB/
MSB de selección de
banco
GRAND PIANO CONCERT 0 0
GRAND PIANO MODERN 0 1
GRAND PIANO CLASSIC 0 2
GRAND PIANO MELLOW
0 3
GRAND PIANO BRIGHT
04
ELEC PIANO 4 0
FM E.PIANO 5 0
60S E.PIANO 4 1
HARPSICHORD 6 0
VIBRAPHONE 11 0
STRINGS 1 49 0
STRINGS 2 48 0
PIPE ORGAN 19 0
JAZZ ORGAN 17 0
ELEC ORGAN 1 16 0
ELEC ORGAN 2 16 1
BASS (LOWER) 1 32 0
BASS (LOWER) 2 32 1
Song List/Lista de canciones
No./Nº Song Name/Nombre de canciones
01 Nocturne Op.9-2
02 Fantaisie-Impromptu Op.66
03 Étude Op.10-3 “Chanson de l’adieu”
04 Étude Op.10-5 “Black Keys”
05 Étude Op.10-12 “Revolutionary”
06 Étude Op.25-9 “Butterflies
07 Prélude Op.28-7
08 Valse Op.64-1 “Petit Chien”
09 Valse Op.64-2
10 Moments Musicaux 3
11 Impromptu Op.90-2
12 Marche Militaire 1 (Duet)
13 Frühlingslied [Lieder Ohne Worte Heft 5]
14 Fröhlicher Landmann [Album für die Jugend]
15 Von fremden Ländern und Menschen [Kinderszenen]
16 Träumerei [Kinderszenen]
17 Tambourin
18
Menuet BWV Anh.114 [Clavierbüchlein der Anna Magdalena Bach]
19 Inventio 1 BWV 772
20 Inventio 8 BWV 779
21 Inventio 13 BWV 784
22 Praeludium 1 BWV 846 [Das Wohltemperierte Klavier 1]
23 Le Coucou
24 Gavotte
25 Sonatina Op.36-1 1st Mov.
26 Sonatine Op.20-1 1st Mov.
27 Sonate K.545 1st Mov.
28 Sonate K.331 3rd Mov. “Turkish March”
29 Rondo K.485
30 Für Elise
31 Marcia alla Turca
32 Sonate Op.13 “Pathétique” 1st Mov.
33 Sonate Op.13 “Pathétique” 2nd Mov.
34 Sonate Op.13 “Pathétique” 3rd Mov.
35 Sonate Op.27-2 “Moonlight” 1st Mov.
36 Rhapsodie 2
37 Waltz Op.39-15 (Duet)
38 Liebesträume 3
39 Blumenlied
40 La Prière d’une Vierge
41 Csikos Post
42 Humoresque Op.101-7
43 Melodie [Lyrische Stücke Heft 2]
44 Sicilienne Op.78
45 Berceuse [Dolly] (Duet)
46 Arabesque 1
47 La Fille aux Cheveux de Lin [Préludes]
48 Passepied [Suite bergamasque]
49 Gymnopédie 1
50 Je Te Veux
51 Salut d’Amour
52 The Entertainer
53 Maple Leaf Rag
54 L’arabesque [25 Etüden Op.100]
55 La Styrienne [25 Etüden Op.100]
56 Ave Maria [25 Etüden Op.100]
57 Le retour [25 Etüden Op.100]
58 La chevaleresque [25 Etüden Op.100]
59 No.13 [Études de Mécanisme Op.849]
60 No.26 [Études de Mécanisme Op.849]
Function Transmitted Recognized Remarks
Basic
Channel
1 - 16
1 - 16
1 - 16
1 - 16
Default
Changed
Note
Number
0 - 127 0 - 127
0 - 127
*
1True voice
After
Touch
Control
Change
X
X
X
O
Pitch Bender
XO
Keys
Ch’s
Velocity
O
9nH v = 1 - 127
X
8nH v = 64
O
9nH v = 1 - 127
X
9nH v = 0, 8nH v =
**
Note ON
Note OFF
Mode
Mode 3
X
Mode 3
X
Default
Messages
Altered
0,32
1
5
6, 38
7
10
11
16
17
18
19
64
65
Bank select
Modulation
Portamento Time
Data entry LSB, MSB
*2
Volume
Pan
Expression
DSP Parameter0
*2
DSP Parameter1
*2
DSP Parameter2
*2
DSP Parameter3
*2
Damper
Portamento Switch
Model PX-150 Version : 1.0
O
O
O
O
O
O
O
O
O
O
O
O
O
O
X
X
X
O
X
X
X
X
X
X
O
X
*1 : Depends on tone
*1 : Depende del tono
** : no relation
** : sin relación
MIDI Implementation Chart
Program
Change
OO
0 - 127:True #
System Exclusive
OO
System
Common
X
X
X
X
X
X
: Song Pos
: Song Sel
: Tune
Aux
Messages
Remarks
System
Real Time
O
O
X
X
: Clock
: Commands
66
67
76
77
78
80
81
82
83
84
88
91
93
100, 101
Sostenuto
Soft pedal
Vibrato rate
Vibrato depth
Vibrato delay
DSP Parameter4
*2
DSP Parameter5
*2
DSP Parameter6
*2
DSP Parameter7
*2
Portamento Control
High resolution velocity prefix
Reverb send
Chorus send
RPN LSB, MSB
*2
Mode 1 : OMNI ON, POLY
Mode 3 : OMNI OFF, POLY
Mode 2 : OMNI ON, MONO
Mode 4 : OMNI OFF, MONO
O : Yes
X : No
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
X
X
X
X
X
X
X
X
O
X
O
X
*2
X
O
X
O
X
X
O
O
X
O
O
X
: All sound off
:
Reset all controller
: Local ON/OFF
: All notes OFF
: Active Sense
: Reset
*2: For details, see MIDI Implementation at http://world.casio.com/.
*2: Si desea más información, vea Implementación MIDI en http://world.casio.com/
.
This recycle mark indicates that the packaging conforms to
the environmental protection legislation in Germany.
Esta marca de reciclaje indica que el empaquetado se
ajusta a la legislación de protección ambiental en Alemania.
MA1205-A Printed in China
C
27

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Casio PX-150 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Casio PX-150 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,03 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Casio PX-150

Casio PX-150 Gebruiksaanwijzing - Nederlands - 38 pagina's

Casio PX-150 Gebruiksaanwijzing - Deutsch - 38 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info