585759

Casio EX-TR300 Handleiding

5
Verklein
Vergroot
Pagina terug
1/126
Pagina verder
Digital Camera
E
User’s Guide
Thank you for purchasing this CASIO product.
• Before using it, be sure to read the precautions contained in this User’s Guide.
• Keep the User’s Guide in a safe place for future reference.
• For the most up-to-date information about this product, visit the official EXILIM
Website at http://www.exilim.com/
2
As you unpack your camera, check to make sure that all accessories shown below
are included. If anything is missing, contact your original retailer.
*1 The type of USB-AC adaptor included varies according to the country or
geographic area where the camera is sold.
*2 A power cord is included with the AD-C53U USB-AC adapter. The shape of the
power cord plug varies according to the country or geographic area where the
camera is sold.
Accessories
Rechargeable lithium ion
battery (NP-150)
Power cord
*
2
Micro USB cable
USB-AC adaptor
*
1
(AD-C54UC/AD-C54UG/AD-C53U)
Strap
1
2
To attach the strap to the camera
Attach strap here.
3
• The contents of this manual are subject to change without notice.
• The contents of this manual have been checked at each step of the production
process. Feel free to contact us if you notice anything that is questionable,
erroneous, etc.
• Any copying of the contents of this User’s Guide, either in part or its entirety, is
forbidden. Except for your own personal use, any other use of the contents of this
manual without the permission of CASIO COMPUTER CO., LTD. is forbidden
under copyright laws.
• CASIO COMPUTER CO., LTD. shall not be held liable for any damages or lost
profits suffered by you or any third party due to the use or malfunction of this
product.
• CASIO COMPUTER CO., LTD. shall not be held liable for any damages or lost
profits caused by loss of memory contents due to malfunction, repair, or any other
reason.
• Note that the example screens and product illustrations shown in this User’s Guide
may differ somewhat from the screens and configuration of the actual camera.
LCD Panel
The liquid crystal panel of the monitor screen uses high-precision technology that
provides a pixel yield in excess of 99.99%. This means that some very small number
of pixels may not light or may remain lit at all times. This is due to the characteristics
of the liquid crystal panel, and does not indicate malfunction.
Read this first!
Take test shots
Before shooting your final image, shoot a test shot to ensure that the camera is
recording correctly.
4
Contents
Contents
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Read this first! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
General Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Monitor Screen Contents and How to Change Them . . . . . . . . . . . . . . . . . . . . 8
]\
Quick Start Basics 11
What you can do with your CASIO camera . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Changing the Camera Style to Suit Shooting Conditions . . . . . . . . . . . . . . . . 13
]
Opening and Closing the Frame. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
]
Rotating the Monitor Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
]
Camera Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Using the Touch Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
First, charge the battery prior to use.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
]
Loading the Battery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
]
Charge the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Configuring Basic Settings the First Time You Turn On the Camera. . . . . . . . 24
Preparing a Memory Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
]
Supported Memory Cards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
]
To load a memory card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
]
To format (initialize) a new memory card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Turning Power On and Off. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
To Shoot a Snapshot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
]
Selecting an Auto Recording Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
]
To shoot a snapshot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Viewing Snapshots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Deleting Snapshots and Movies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Snapshot Shooting Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
]\
Recording Images 37
Selecting a Recording Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
]
Shooting with Artistic Effects . . . . . . . . . . . . . . . . . . . . . . . . . .(ART SHOT). . . 39
]
Recording Beautiful Portraits . . . . . . . . . . . . . . . . . . . . . . . . . . . .(Make-up). . . 41
]
Using Motion Shutter to Trigger a Self-timer Operation . . . (Motion Shutter). . . 42
Shooting with Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Shooting a Self-portrait . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
To record a movie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
]\
Using BEST SHOT 49
Shooting Clearer Snapshots . . . . . . . . . . . . . . . . . . . . . . (Multi SR Zoom) . . 50
Digitally Correcting for Overexposure and Underexposure . . . . . . (HDR) . . 51
Shooting with High Speed Night Scene . . . . . . . . . . . . .(HS Night Scene) . . 52
Shooting with High Speed Anti Shake . . . . . . . . . . . . . . .(HS Anti Shake) . . 53
Shooting with Priority on Subject Faces . . . . . . . . . . . (HS Best Selection) . . 53
Shooting a Panorama Image . . . . . . . . . . . . . . . . . . . . .(Slide Panorama) . . 54
5
Contents
]\
Advanced Recording Settings 57
Using the REC Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
]
Using Touch Shutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(Touch Shutter). . . 58
]
Using the Self-timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Self-timer). . . 58
]
Using the LED Light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (LED). . . 59
]
Changing the Image Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(Image Size). . . 60
]
Movie Image Quality Settings . . . . . . . . . . . . . . . . . . . . . . .(Movie Quality). . . 61
]
Correcting Image Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . (EV Shift). . . 62
]
Adjusting White Balance . . . . . . . . . . . . . . . . . . . . . . . . . . (White Balance). . . 63
]
Specifying ISO Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(ISO). . . 64
]
Selecting a Focus Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(Focus). . . 65
]
Turning on Image Review . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Review). . . 66
]
Checking a Snapshot before Saving It . . . . . . . . . . . . . (Self-portrait check). . . 67
]\
Viewing Snapshots and Movies 68
Viewing Snapshots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Viewing a Movie. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
]
Editing a Movie on the Camera . . . . . . . . . . . . . . . . . . . . . . (Movie Editing). . . 70
Viewing a Panorama Image. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Playing a Slideshow on the Camera . . . . . . . . . . . . . . . . . . . . (Slideshow) . . 71
Viewing the Image Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Zooming an On-screen Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Viewing Snapshots and Movies on a TV Screen . . . . . . . . . . . . . . . . . . . . . . . 73
]\
Other Playback Functions (PLAY) 75
Using the PLAY Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
]
Performing Paint Operations on an Image . . . . . . . . . . . . . . . . . . . . .(Paint). . . 76
]
Extracting an Image from a Snapshot . . . . . . . . . . . . . . . .(Cut out subject). . . 77
]
Inserting a Subject into another Snapshot or Adding a
Built-in Frame to a Snapshot . . . . . . . . . . . . . . . . . . . . . . . . (Paste subject). . . 79
]
Protecting a File Against Deletion . . . . . . . . . . . . . . . . . . . . . . . . . (Protect). . . 80
]
Rotating an Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Rotation). . . 81
]
Resizing a Snapshot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Resize). . . 81
]
Cropping a Snapshot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Trimming). . . 82
]\
Printing 83
Printing with a Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
]\
Using the Camera with a Computer 85
Things you can do using a computer... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Using the Camera with a Windows Computer . . . . . . . . . . . . . . . . . . . . . . . . . 85
]
Viewing and Storing Images on a Computer. . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
]
Playing Movies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Using the Camera with a Macintosh . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
]
Connecting the Camera to Your Computer and Saving Files . . . . . . . . . . . . . . . 89
]
Playing a Movie. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
6
Contents
Files and Folders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Memory Card Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
]\
Other Settings (Set Up) 94
Adjusting Monitor Screen Brightness . . . . . . . . . . . . . . . . . . . . . .(Screen) . . 94
Configuring Camera Sound Settings . . . . . . . . . . . . . . . . . . . . . (Sounds) . . 94
Setting the Camera’s Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Adjust) . . 95
Time Stamping Snapshots . . . . . . . . . . . . . . . . . . . . . . . . . . .(Timestamp) . . 95
Configuring World Time Settings . . . . . . . . . . . . . . . . . . . . . (World Time) . . 96
]
Setting a Travel Destination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
]
Selecting the Time Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Specifying the Date Style . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Date Style) . . 97
Specifying the Display Language . . . . . . . . . . . . . . . . . . . . . . (Language) . . 97
Selecting the HDMI Terminal Output Method . . . . . . . . . . . . . . . . . (HDMI) . . 98
Displaying a Startup Screen at Power On . . . . . . . . . . . . . . . . . .(Startup) . . 98
Formatting Built-in Memory or a Memory Card . . . . . . . . . . . . . . .(Format) . . 99
Resetting the Camera to Factory Defaults . . . . . . . . . . . . . . . . . . .(Reset) . . 99
]\
Appendix 100
Safety Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
Precautions During Use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
Power Supply. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
]
Charging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
]
Battery Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111
]
Using the Camera in another Country . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111
Using a Memory Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
Reset Initial Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
When things don’t go right... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
]
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
]
Display Messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
Number of Snapshots/Movie Recording Time . . . . . . . . . . . . . . . . . . . . . . . . 120
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
7
The numbers in parentheses indicate the pages where each item is explained.
* Your camera has two shutter buttons.
General Guide
1
Frame (page 13)
2
Speaker
3
Shutter button*
(Self-portrait shutter
button) (pages 31, 67)
4
Lens
5
Microphone
(pages 16, 48)
6
LED light (page 59)
7
Memory card slot
(pages 27, 28)
8
[HDMI] HDMI output
(micro) (page 73)
9
[CARD HDMI] cover
(pages 27, 73)
bk
Back lamp
(pages 20, 23, 29, 31)
bl
[p] (Power) (page 29)
bm
Shutter button*
(page 31)
bn
Monitor screen
(pages 8, 9, 94)
bo
[USB] port
(pages 19, 22, 86, 90)
bp
Strap hole (page 2)
bq
[BATT.OPEN] button
(pages 18, 18)
1
3
2
456
bkblbmbn bpbq
7
bo
8
9
br
br
Battery slot (page 18)
8
The monitor screen uses various indicators, icons, and values to keep you informed
of the camera’s status.
• The sample screens in this section are intended to show you the locations of all the
indicators and figures that can appear on the monitor screen in various modes.
They do not represent screens that actually appear on the camera.
. Snapshot Recording
NOTE
•
bl
Movie capacity and
bm
Snapshot capacity do not appear in the following cases,
even if “Information On” is selected for the information display setting (page 10).
– Portrait orientation display
– When the monitor screen and lens are facing in the same direction
Monitor Screen Contents and How to Change Them
1
Tab (page 29)
2
Focus mode (page 65)
3
Self-timer mode (page 58)
4
Digital zoom (page 43)
5
Snapshot image size (page 60)
6
Movie quality (pages 46, 61)
7
LED light (page 59)
8
Zoom icons (pages 31, 43)
9
“b” Movie icon (pages 32, 46)
bk
Battery level indicator (page 24)
bl
Movie capacity (recording time) (page 31)
bm
Snapshot capacity (number of shots)
(page 31)
bn
PLAY mode icon (page 29)
bo
Information icon (page 10)
bp
Auto rotate icon (page 10)
bq
Recording mode icon (page 38)
br
Menu icon (page 57)
9
bn
bo
bp
bq
br
bkblbm
8
356
7241
9
. Movie Recording
. Snapshot Viewing
. Movie Playback
1
Movie quality (
pages 46, 61)
2
Recording time switch icon (page 47)
3
Movie remaining time icon (page 47)
4
Remaining movie memory capacity/
Movie recording time (pages 47, 120)
5
Zoom icons (pages 31, 43)
6
“c” Movie stop icon (pages 32, 47)
1
Tab (page 29)
2
Protect indicator (page 80)
3
Folder name/file name (page 92)
4
Snapshot image size (page 60)
5
Image menu icon (p
age 72)
6
Image scroll icons (pages 34, 68)
7
Battery level indicator (page 24)
8
Date/time (pages 24, 95)
9
REC mode icon (page 29)
bk
Information icon (page 10)
bl
Slideshow icon (page 71)
bm
Delete icon (page 34)
bn
Menu icon (page 75)
1
Tab (page 29)
2
Protect indicator (page 80)
3
Folder name/file name (page 92)
4
Movie quality (pages 46, 61)
5
Image menu ico
n (page 72)
6
Movie recording time (page 68)
7
Image scroll icons (pa
ges 34, 68)
8
Battery level indicator (page 24)
9
Date/time (pages 24, 95)
bk
“6”
Movie play ico
n (page 68)
42
1 3
5
6
5
78
42
13
6
9
bk
bl
bm
bn
32 41
5
6
9bk 8
7
10
. Configuring Auto Screen Alignment (Auto rotate)
You can use the Auto Rotate setting to enable or disable automatic rotation of screen
contents in accordance with the physical orientation of the monitor screen.
1. Turn on the camera and then touch “«” (Auto rotate).
• If you do not see “«” on the screen, touch the tab to display it (page 29).
2. Select the Auto Rotate setting you want.
. Selecting Display Information (DISP)
Each touch of “DISP” will cycle through settings that display or hide on-screen
information. You can configure separate settings for the REC mode and PLAY mode.
• If “DISP” is not displayed on the screen, touch the tab to display it.
• Display information cannot be changed during movie recording.
When Status On is selected for display information in the PLAY mode, the exposure,
shutter speed, and ISO sensitivity setting values of the currently displayed image are
displayed in orange when the current image’s Auto Exposure (AE) is not correct.
On
Automatically orients monitor screen contents to match
camera orientation.
Off Fixes orientation of monitor screen contents.
Off No information displayed.
Information On Shows information about image settings, etc.
Status On
Shows more detailed information about settings.
• When Status On is selected, you will not be able to view the
subject on the monitor screen.
11
Quick Start Basics
Quick Start Basics
Your CASIO camera is packed with a powerful selection of features and functions to
make recording of digital images easier, including the following main functions.
What you can do with your CASIO camera
A variety of shooting styles
The frame can be opened and the LCD monitor screen
rotated into positions that make long-term shooting
more comfortable and simplify self-shooting.
Simple touch panel operation
The monitor screen is a touch panel that can be used
to perform operations.
Simple self-portrait shooting
The monitor screen can be rotated so it faces in the
same direction as the camera’s lens, making self-
shooting much easier.
Make-Up
Make-up smoothes the skin texture of the subject and
softens facial shadows caused by harsh sunlight for
better looking portraits.
*See page 13 for more information.
*See page 16 for more information.
*See page 45 for more information.
*See page 41 for more information.
12
Quick Start Basics
ART SHOT
A variety of artistic effects help to make even common,
ordinary subjects become more novel and exciting.
“ART SHOT” provides the following effects: HDR Art,
Sparkling Shot, Toy Camera, Soft Focus, Light Tone,
Pop, Sepia, Monochrome, Miniature, Fisheye.
Extract a subject from one
photo and insert it into
another
You can extract a person or object out of one snapshot and insert into another
snapshot, or you can add a built-in frame to a snapshot.
Paint
Draw figures, write text, or stamp information into a
recorded snapshot.
*See page 39 for more information.
*See pages 77, 79 for more information.
*See page 76 for more information.
B
13
Quick Start Basics
You can change the configuration of the camera by opening or closing the frame and
rotating the monitor screen panel to suit shooting conditions.
IMPORTANT!
• Do not apply strong pressure to the surface of the monitor screen. Doing so can
damage it.
• Never touch the lens with your fingers. Finger smudges, dirt, and other foreign
matter on the lens can interfere with proper operation of the camera. Use a blower
or other means to keep the lens and flash window free of dirt and dust, and wipe
gently with a soft, dry cloth.
The frame of the camera can be rotated 360 degrees.
1. With the monitor screen facing towards
you, hold onto the frame.
2. Push the monitor screen panel from
behind.
3. Holding the edges of the monitor
screen panel, swing the frame open.
IMPORTANT!
• Do not try to open or close the frame while the monitor screen panel is rotated.
Doing so can cause the frame to come into contact with the monitor screen panel
and cause malfunction.
Changing the Camera Style to Suit Shooting Conditions
Opening and Closing the Frame
14
Quick Start Basics
Use the steps below to rotate the monitor screen.
NOTE
• While holding the monitor screen panel as shown in the illustration, you can rotate
it 180 degrees clockwise and 90 degrees counterclockwise.
• The monitor screen panel can also be rotated when the frame is closed.
1. Hold the camera as shown in the
illustration.
2. Firmly holding the frame, carefully rotate the monitor screen panel.
Rotating the Monitor Screen
90 degrees counterclockwise
180 degrees clockwise
15
Quick Start Basics
You can open the frame and rotate the monitor screen for a variety of different styles.
Camera Configurations
Normal Shooting Movie Recording
Shoot with the monitor screen facing the
opposite direction of the lens.
Open the frame 90 degrees and hold the
frame. You can also shoot with the
camera upside down, if you like.
Tabletop Shooting Self-portrait Shooting
Point the monitor screen and lens in the
same direction and open the frame
about 30 degrees so the camera can
stand up.
Open the frame, point the monitor
screen and lens in the same direction,
and press the shutter button on the
frame to shoot.
16
Quick Start Basics
NOTE
• When shooting hold the camera still. Carefully press the shutter button and take
care to avoid all movement as the shutter releases and for a few moments after it
releases.
• Take care that your fingers and the strap do not cover
any of the areas indicated in the illustration.
• To protect against accidentally dropping the camera,
attach the wrist strap and make sure it is around your
fingers or wrist while you are operating the camera.
• Never swing the camera around by its strap.
• The supplied strap is intended for use with this
camera only. Never use it for any other purpose.
IMPORTANT!
• Take care to ensure that your finger is not blocking or
is not too close to the LED light. Fingers can cause
unwanted shadows when shooting.
The monitor screen of the camera is a touch panel. This means you can perform the
following operations by touching the screen with your fingers.
Touch
Momentarily touching the screen with your finger.
Touch the screen to select an icon or menu item, and
to configure settings.
Touch-and-hold
Holding your finger against the screen.
Touch and hold the screen to scroll images at high
speed, or to perform continual frame-by-frame
playback of a movie.
Using the Touch Panel
Microphone
Lens
LED light
17
Quick Start Basics
Drag
Holding your finger against the screen as you drag it
up, down, left, or right.
Use drag to move a screen image to a different
location, and to scroll between images.
Spread
Holding your thumb and forefinger against the screen
as you spread them out.
Use spread to enlarge the screen image.
Squeeze
Holding your thumb and forefinger against the screen
as you bring them together.
Use squeeze to reduce the size of the screen image.
IMPORTANT!
• Never use a pointed or hard object to perform screen operations. Doing so can
damage the screen.
NOTE
• Applying a commercially available LCD protective sheet will reduce the operation
sensitivity of the monitor screen.
18
Quick Start Basics
Note that the battery of a newly purchased camera is not charged. Perform the steps
below to load the battery into the camera and charge it.
• Your camera requires a special CASIO rechargeable lithium ion battery (NP-150)
for power. Never try to use any other type of battery.
1. Open the cover.
While depressing the [BATT.OPEN]
button, slide the cover in the direction
indicated by the arrow in the illustration.
2. Load the battery.
With the CASIO logo on the battery
upwards, load the battery into the
camera as shown in the illustration.
3. Close the cover.
While holding down the [BATT.OPEN]
button, align the tabs of the cover with the
notches on the camera and then slide the
cover in the direction of the arrow.
First, charge the battery prior to use.
Loading the Battery
2
3
1
[BATT.OPEN]
button
CASIO logo
Battery
OK
NG
1
3
2
[BATT.OPEN]
button
19
Quick Start Basics
To replace the battery
1. Open the battery cover and remove the
current battery.
As shown in the illustration, pull up the edge of
the battery to remove it.
2. Load a new battery.
You can use either of the two following methods to charge the battery. Before
charging the battery, use the procedure under “Opening and Closing the Frame”
(page 13) to open the frame.
• USB-AC adaptor
• USB connection to a computer
. To charge with the USB-AC adaptor
The adaptor lets you charge the battery while it is loaded in the camera.
While the camera is turned off, connect in the sequence shown below.
Charging time: Approximately 140 minutes
• When disconnecting the USB-AC adaptor from the camera, be sure to disconnect
from the camera first.
Charge the Battery
4
3
2
2
1
3
2
1
USB-AC adaptor
(AD-C53U)
u mark of the small
(micro USB) connector
facing the side opposite
that of the monitor
screen.
[USB] port
Micro USB cable
(included with camera)
Power cord
USB-AC adaptor
(AD-C54UC)
USB-AC adaptor
(AD-C54UG)
B
20
Quick Start Basics
IMPORTANT!
• A battery that has not been used for a long time, or ambient temperature extremes
can cause charging to take longer than normal. If charging takes longer than about
five hours, a timer will terminate it automatically, even if the battery is not fully
charged. This is indicated by the back lamp flashing red. If the battery has not been
used for a very long time, charging may be terminated automatically and the back
lamp may start flashing red after only about 60 minutes. In either case, disconnect
the USB cable from the camera and then reconnect it to resume charging.
•Pressing [p] (Power) while the USB-AC adaptor is connected to the camera will
turn on the camera with power being supplied by the battery. Because of this,
charging will stop.
• The USB-AC adaptor will become warm during charging. This is normal and does
not indicate malfunction.
• The shape of the power plug depends on each country or geographic area.
Back Lamp Operation
Lamp Status Description
Lit Red Charging
Flashing Red
Abnormal ambient temperature, USB-AC
adaptor problem, or battery problem (page
110), or charging terminated by the timer
Off Charging complete
Back lamp
21
Quick Start Basics
USB Cable Connection Precautions
• When connecting the USB cable to the camera, make sure that the cable
connector and monitor screen panel are oriented correctly as shown in the
illustration below.
• Make sure that you insert the cable connector into the USB port until you feel it
click securely into place. Failure to insert the connector fully can result in poor
communication or malfunction.
• Note that even while the connector is fully inserted, you
still will be able to see the metal part of the connector as
shown in the illustration.
Make sure that the u mark side of the
USB cable connector and the front of the
monitor screen panel (the side opposite that
of the monitor screen) are facing in the same
direction.
Front of monitor screen
panel
The back lamp always initially light after charging starts. Even if the battery is
already fully charged, the lamp will light momentarily.
If the lamp does not light, check the orientation of the USB cable connector.
22
Quick Start Basics
. To charge using a USB connection to a computer
USB connection lets you charge the battery while it is loaded in the camera.
While the camera is turned off, connect in the sequence shown below (
1
,
2
).
• If the camera is on, press [p] (Power) to turn it off before connecting it to your
computer.
Charging time: Approximately 170 minutes
IMPORTANT!
• The first time you connect the camera to your computer with the USB cable, an
error message may appear on your computer. If this happens, disconnect and then
reconnect the USB cable.
• A battery that has not been used for a long time, certain types of computers, and
connection conditions can cause charging to take more than approximately five
hours, which will trigger a timer that terminates charging automatically, even if the
battery is not fully charged. If this happens, disconnect and then reconnect the
USB cable to restart charging. To complete charging faster, use of the included
USB-AC adaptor is recommended.
• If the battery has not been used for a very long time, charging may terminate
automatically and the back lamp may start flashing red or go out after only about
60 minutes. In either case, use of the USB-AC adaptor that comes with the camera
is recommended.
• If you turn on the camera while charging over a USB connection to a computer is in
progress, the camera will establish a USB connection with the computer. Though
charging normally should continue at this time, certain types of computers or
connection environments may stop charging if supply power is low. This will be
indicated by the camera’s back lamp lighting green.
• Charging is not performed while the connected computer is in the hibernate mode.
USB
2
1
Micro USB cable
(included with camera)
u mark of the small (micro USB) connector facing the side
opposite that of the monitor screen.
[USB] port
USB port
Computer
(power turned on)
23
Quick Start Basics
Back Lamp Operation
• The information in parentheses in the above table shows the lamp status while the
camera is turned on during charging.
Other Charging Precautions
• With the two charging methods described above, you can charge the camera’s
battery (NP-150) without removing it from the camera. Never use any other type of
charger device. Attempting to use a different charger can result in unexpected
accident.
• This model can be charged only via from USB 2.0 specification USB port only.
• USB charging devices and power supply devices are subject to fixed standards.
Use of an inferior device or a device that is not up to standard can cause
malfunction and/or failure of your camera.
• Operation is not guaranteed in the case of a computer built or modified by you.
Even in the case of a commercially available computer, certain USB port
specifications may make it impossible to charge via the USB cable.
• A battery that is still warm immediately after normal use may not charge fully. Give
the battery time to cool before charging it.
• A battery discharges slightly even when it is not loaded in the camera. Because of
this, it is recommended that you charge the battery immediately before you need to
use it.
• Charging the camera’s battery may cause interference with TV and radio reception.
If this happens, plug the USB-AC adaptor into an outlet that is further away from
the TV or radio.
• Actual charging time depends on current battery capacity and charging conditions.
• Do not use the USB-AC adaptor with any other device.
• Never use the power cord with another device.
• Use only the USB-AC adaptor and USB cable specified in this manual for charging.
Use of any other type of devices may result in improper charging.
Lamp Status Description
Lit Red,
(Lit/Flashing Amber)
Charging
Flashing Red
Abnormal ambient temperature,
charging taking abnormally long, or
battery problem (page 110)
Off, (Lit Green) Charging complete
Back lamp
24
Quick Start Basics
Checking the Current Battery Level
As battery power is consumed, a battery indicator on the monitor screen indicates its
current level as shown below.
indicates battery power is low. Charge the battery as soon as possible.
Recording is not possible when is indicated. Charge the battery immediately.
• The level shown by the battery indicator may change when you switch between the
REC mode and PLAY mode.
• Leaving the camera for about 30 days with no power supplied while the battery is
dead will cause its date and time settings to be cleared. A message telling you to
configure time and date settings will appear the next time you turn on the camera
after restoring power. When this happens, configure date and time settings (page
95).
• See page 123 for information about battery life and number of shots.
The first time you turn on the camera, a screen appears for configuring the display
language, date, and time settings. Failure to set the date and time correctly will cause
the wrong date and time data to be recorded with images.
IMPORTANT!
• A screen for language selection will not appear in step 2 of the procedure below if
you purchased a camera intended for the Japanese market. To change the display
language from Japanese in this case, use the procedure under “Specifying the
Display Language (Language)” (page 97). Note that a version of this manual in the
language you select may not be included with a camera intended for the Japanese
market.
• Camera models sold in certain geographic areas may not support display language
selection.
Level High Low
Battery Indicator ***
Indicator Color Cyan * Yellow * Red * Red
Configuring Basic Settings the First Time You Turn On the
Camera
25
Quick Start Basics
1. Press [p] (Power) to turn on the camera.
2. Drag (page 17) upwards and downwards until
you find the language you want, and then touch
to select it.
3. Touch the date display format you want.
Example: July 10, 2015
YY/MM/DD
* 15/7/10
DD/MM/YY
* 10/7/15
MM/DD/YY
* 7/10/15
4. Touch the value you want to change (year,
month, day, hour, minute).
5. Touch “8” or “2” to change the currently
selected value.
• Touching and holding “8” or “2” will change the
setting at high speed.
• To switch between 12-hour and 24-hour format,
touch the 12/24 hour switch icon.
6. When the date and time settings are the way you want, touch “OK”.
7. Touch “Auto” or “Premium Auto Pro” to select the default auto
recording mode you want.
8. Touch “Apply”.
• You will be able to change this setting later, if you want. See page 30 for
details.
NOTE
• Each country controls its local time offset and the use of summer time, and so they
are subject to change.
If you make a mistake configuring display language, date, or time settings with the
above procedure, refer to the following pages for information about how to correct
the settings.
– Display language: Page 97
– Date and time: Page 95
[p] (Power)
12/24 hour switch icon
26
Quick Start Basics
Though the camera has built-in memory that can be used to store images and
movies, you probably will want to purchase a commercially available memory card for
greater capacity. The camera does not come with a memory card. Images recorded
while a memory card is loaded are saved to the memory card. When no memory card
is loaded, images are saved to built-in memory.
• For information about memory card capacities, see page 120.
– microSD Memory Card
– microSDHC Memory Card
– microSDXC Memory Card
• The above are supported memory card types as of June 2013.
• This camera supports use of microSD memory cards of the
following types and capacities: microSD memory cards up to 2GB, microSDHC
memory cards from 2GB up to 32GB, microSDXC memory cards from 32GB up to
2TB. Note that the ability to use any particular card with this camera, even if it
satisfies the above capacity and type requirements, is not guaranteed.
Preparing a Memory Card
Supported Memory Cards
Warning!
0 Memory cards are small and present a risk of accidentally being swallowed
by infants and young children. Keep memory cards out of the reach of
infants and young children. If a memory card is ever swallowed accidentally,
contact a physician immediately.
+
*
27
Quick Start Basics
1. Press [p] (Power) to turn off the
camera and then open the frame
(page 13).
2. Hook your nail into the groove of
the [CARD HDMI] cover and pull the
cover in the direction indicated by
the arrow to open it.
3. Load a memory card.
Positioning the memory card so its back
is facing upwards (towards the monitor
screen side of the camera), slide it into
the card slot all the way in until you hear it
click securely into place.
4. Close the [CARD HDMI] cover and
then return the frame to its original
position.
IMPORTANT!
• Never insert anything besides a supported memory card (page 26) into the memory
card slot.
• Should water or any foreign object ever get into the card slot, immediately turn off
the camera, and contact your retailer or nearest CASIO authorized service center.
To load a memory card
[CARD HDMI] cover
Back
Front Back
28
Quick Start Basics
. To replace the memory card
Press the memory card and then release it.
This will cause it to pop out of the memory
card slot slightly. Pull the card out the rest of
the way and then insert another one.
• Never remove a card from the camera
while the back lamp is flashing green.
Doing so can cause the image save
operation to fail and even damage the
memory card.
Format a memory card on the camera before using it for the first time.
IMPORTANT!
• Formatting a memory card that already has snapshots or other files on it, will delete
its contents. Normally you do not need to format a memory card again. However, if
storing to a card has slowed down or if you notice any other abnormality, re-format
the card.
• Be sure to use the camera to format a memory card. Formatting a card on a
computer will result in a non-SD standard format, which can greatly slow down
processing time and cause compatibility, performance, and other problems.
1. Load a memory card (page 27).
2. Turn on the camera and then touch “MENU”.
• If “MENU” is not displayed on the screen, touch the tab to display it (page 37).
3. Drag upwards and downwards until you find “Setup”, and then touch it.
4. Touch “Format”.
5. Touch “Format” and then touch “Yes”.
This starts the memory card format operation.
To format (initialize) a new memory card
29
Quick Start Basics
. To turn on the camera
Press [p] (Power).
This will turn on the camera, which is indicated when the
back lamp lights green, and enter the REC mode.
Entering the REC Mode and PLAY Mode
. To turn off the camera
Press [p] (Power).
NOTE
• To conserve battery power, an Auto Power Off function will turn off power
automatically if you do not perform any operation for about five minutes.
Turning Power On and Off
To enter the
PLAY mode
In the REC mode, touch “p” (PLAY).
• If Auto, BEST SHOT, or ART SHOT
is selected as the recording mode,
you can also switch to the PLAY
mode by touching the tab and then
touching “p” (PLAY).
To enter the
REC mode
In the PLAY mode, touch the tab. On
the screen image that appears, touch
“
r” (REC).
[p] (Power)
Back lamp
Tab
“p” (PLAY) / “r” (REC)
Screen after tab is
touched
30
Quick Start Basics
Your camera has a variety of different recording modes to suit various shooting
conditions and objectives (page 38). This section explains general shooting
procedures using the auto recording mode.
You can select one of two auto recording modes (Auto or Premium Auto Pro)
according to your digital imaging needs.
1. Press [p] (Power) to turn on the camera.
2. Touch the second icon from the top
(second icon from the right in the case of
landscape display orientation) (Recording
mode).
If the icon is not displayed on the screen, touch
the tab to display it.
3. Touch “Auto” or “Premium Auto Pro” to
select the auto recording mode you want.
To Shoot a Snapshot
Selecting an Auto Recording Mode
Setting
REC Screen
Icon Display
Description
Auto This is the standard Auto recording mode.
Premium
Auto Pro
With Premium Auto Pro recording, the camera
automatically determines whether you are shooting a
subject or scenery, and other conditions. Premium
Auto Pro recording delivers higher image quality than
standard Auto recording.
• Some of the settings configured automatically by
Premium Auto Pro cannot be changed by you.
• It also requires more power (and runs down the
battery quicker) than Auto.
Recording mode icon
B
31
Quick Start Basics
1. Point the camera at the subject.
If you are using Premium Auto Pro, text will
appear in the lower right corner of the monitor
screen describing the type of shot the camera has
detected.
• Touch the zoom icons to change the zoom
factor (page 43).
2. Half-press the shutter button to focus
the image.
When focus is complete, the camera will
beep, the back lamp will light green, and
the focus frame will turn green.
To shoot a snapshot
When you half-press the shutter button, the camera
automatically adjusts exposure and focuses on the
subject it is currently pointed at. Mastering how
much pressure is required for a half-press and a
full-press of the shutter button is an important
technique for good-looking images.
Zoom icons
Type of shot
Movie capacity
(recording time)
Snapshot capacity
(number of shots)
+
(Telephoto) – (Wide Angle)
Focus frame
Back lamp
Shutter buttons
Half-press
Press lightly until
the button stops.
Beep, beep (Image is in focus.)
32
Quick Start Basics
3. Continuing to keep the camera still,
press the shutter button the rest of
the way down.
This records the snapshot.
NOTE
• You also can shoot a snapshot by touching a point on the monitor screen (page
58).
• You can specify the image size for snapshots. See page 60 for more information.
. If the image does not focus...
If the focus frame stays red and the back lamp is flashing green, it means that the
image is not in focus (because the subject is too close, etc.). Re-point the camera at
the subject and try to focus again.
. Shooting with Auto
“Focus lock” (page 66) is the name of a technique you can use when you want to
shoot an image in which the subject to be focused on is not within the focus frame in
the center of the screen.
Recording a Movie
Touch “b” (Movie) to start movie recording. Touch
“
c” (Movie Stop) to stop recording.
See page 46 for details.
Full-press
Snap (Image is recorded.)
“b” (Movie)/
“c” (Movie Stop)
33
Quick Start Basics
. Shooting with Premium Auto Pro
• In addition to shutter speed and ISO sensitivity, the camera automatically executes
the following operation as required when shooting with Premium Auto Pro.
– Auto Focus is normally performed until you half-press the shutter button.
– The camera automatically determines the focus point on the screen and focuses
there.
– When shooting people, the face detection feature detects the faces of up to ten
individuals and adjusts focus and brightness accordingly.
• When shooting with Premium Auto Pro, the message “Processing Premium Auto.”
may appear on the monitor screen. If you feel the camera is taking too long to
process data, try shooting with standard Auto instead.
• In some cases, Premium Auto Pro may not be able to interpret the shooting
environment correctly. If this happens, shoot with standard Auto.
• If “Š” is displayed, the camera will shoot a series of CS images and merge them
into a final image. Take care to avoid any camera and subject movement until
shooting of all of the CS images is complete.
Use the following procedure to view snapshots on the camera’s monitor screen.
• For information about how to play back movies, see page 68.
1. Touch “p” (PLAY) to enter the PLAY mode.
This will display one of the snapshots currently
stored in memory.
• If “Premium Auto Pro” is selected as the
recording mode, touch the Review image (page
66) in the lower left corner of the monitor screen.
• Information about the displayed snapshot also is
included (page 9).
• You also can clear the information to view only
the snapshot (page 10).
• You can zoom the screen image by touching the monitor screen (page 72).
If you are recording a snapshot that is very important to you, it is recommended
that you zoom the image and check its details after recording it.
Viewing Snapshots
“p” (PLAY)
34
Quick Start Basics
2. Touch “ú” or “õ”, or drag left or right across the screen image to
scroll through the snapshots.
• To scroll at high speed, touch and hold “ú” or “õ”.
NOTE
• Pressing the shutter button while in the PLAY mode or while a menu screen is
displayed will switch directly to the REC mode.
• A question mark (?) will be displayed for images that cannot be displayed for some
reason.
If memory becomes full, you can delete snapshots and movies you no longer need in
order to free up storage and record more images.
IMPORTANT!
• Remember that a file (image) delete operation cannot be undone.
. To delete a single file
1. In the PLAY mode, touch “ú” or “õ” to display the file you want to
delete.
2. Touch “t”.
•If “t” is not displayed on the screen, touch the tab
to display it.
3. Touch “1 File”.
This will delete the selected image.
Deleting Snapshots and Movies
“õ”
“õ”
“ú”
“ú”
35
Quick Start Basics
. To delete specific files
1. Enter the PLAY mode.
2. Touch “t”.
•If “t” is not displayed on the screen, touch the tab to display it.
3. Touch “Select”.
This displays a file selection screen.
4. Touch a file you want to delete.
This will select the check box of the selected file’s image.
5. After you are finished selecting files, touch “Delete”.
6. Touch “Delete”.
This deletes the files you selected.
• To cancel the delete operation, touch “Cancel” in step 6.
. To delete all files
1. Enter the PLAY mode.
2. Touch “t”.
•If “t” is not displayed on the screen, touch the tab to display it.
3. Touch “All Files”.
4. Touch “Delete”.
This will cause the message “There are no files.” to appear.
Operation
• If unwanted light is shining onto the lens, shade the lens with your hand when
shooting an image.
Monitor Screen when Shooting Snapshots
• Subject brightness conditions can cause monitor screen response to slow and can
cause digital noise in the monitor screen image.
• The image that appears on the monitor screen is for image composition. The actual
image will be recorded in accordance with the currently selected recording mode
(page 38).
Snapshot Shooting Precautions
36
Quick Start Basics
Shooting Indoors under Fluorescent Lighting
• Minute flickering of fluorescent lighting can affect the brightness or color of an
image.
Other Precautions
• The slower the shutter speed, the greater the possibility that noticeable noise will
be generated in an image. Because of this, the camera automatically performs a
noise reduction at slow shutter speeds. The noise reduction process causes it to
take longer to record images at lower shutter speeds. The shutter speeds for which
noise reduction is performed depend on the camera setup and shooting conditions.
• A noise reduction process is performed when ISO sensitivity is set to a high value.
This can cause the camera to take relatively longer to be ready to shoot again after
you press the shutter button. Do not perform any operation while the image
recording operation is in progress.
• Due to the characteristics of the imaging element used by the camera, very fast
moving objects in an image may appear distorted.
. Auto Focus Restrictions
• Any of the following can make proper focus impossible.
– Solid color wall or other very low contrast subject
– Strongly back lit subject
– Very shiny subject
– Blinds or other subject with a repeating horizontal pattern
– Multiple subjects at varying distances from the camera
– Subject in a dark location
– Camera movement while shooting
– Fast-moving subject
– Subjects outside the focus range of the camera
• If you cannot focus properly, try using focus lock (page 66).
37
Recording Images
Recording Images
Touching the monitor screen in the REC mode will display a screen for configuring
REC mode settings.
. To configure REC mode settings
2. Touch the item whose setting you want to change.
• If there are no icons along the left side of the screen, touch the tab to display
them.
1. Press [p] (Power) to turn on the
camera and enter the REC mode.
• If the camera is in the PLAY mode, touch
“
r” (REC) to enter the REC mode.
1
Tab (page 29)
2
Menu (page 57)*
3
Recording mode (page 38)
4
Auto rotate (page 10)
5
Information (page 10)
6
PLAY mode/Make-up Level
(pages 29, 41)
7
Zoom (page 43)
8
Movie (page 46)
* Depending on the recording mode, some of the items on the menu that
appears may not be usable.
[p] (Power)
“r” (REC)
1
2
3
4
5
6
7
8
38
Recording Images
The camera has a variety of different recording modes.
1. In the REC mode, touch the recording
mode icon.
• If the icon is not displayed on the screen, touch
the tab to display it.
2. Touch the icon of the recording mode you
want to use.
This enters the selected recording mode.
Selecting a Recording Mode
Auto
Standard Auto recording mode. This is the mode normally
used for shooting (page 30).
Premium Auto
Pro
With Premium Auto Pro recording, the camera
automatically determines whether you are shooting a
subject or scenery, and other conditions. Premium Auto
Pro recording delivers higher image quality than standard
Auto recording mode (page 30).
BEST SHOT
With BEST SHOT, simply select the sample scene that
resembles the type of shot you want, and the camera
automatically configures ideal settings for the subject and
shooting conditions (page 49).
ART SHOT
A variety of artistic effects help to make even common,
ordinary subjects become more novel and exciting (page
39).
Make-up
Make-up smoothes the skin texture of the subject and
softens facial shadows caused by harsh sunlight for better
looking portraits (page 41).
Motion Shutter
In this mode, the camera starts a self-timer countdown
when it detects subject movement (page 42).
Recording mode icon
39
Recording Images
A variety of artistic effects help to make even common, ordinary subjects become
more novel and exciting.
1. In the REC mode, touch the recording mode icon (page 38).
2. Touch “C” (ART SHOT).
3. Touch the ART SHOT scene you want to use.
• Touch the arrow on the right side of the monitor
screen to display another scene.
• Touching “ ” in the upper right corner of the
screen and then touching a ART SHOT scene will
display detailed information about the scene.
Shooting with Artistic Effects (ART SHOT)
Scene Description
HDR Art
Applies HDR (High Dynamic Range, page 51) photography
to transform snapshots into works of art that provide a
greater degree of expression than conventional imaging.
Sparkling Shot
Softens the overall image and adds points of light for a
sparkle effect.
Toy Camera
Darkens the periphery and changes hues for a toy camera
effect.
Soft Focus Blurs overall focus for a mysteriously soft effect.
Light Tone Weakens contrast to create an elegantly subdued effect.
Pop Strengthens saturation for richer colors.
Sepia Sepia colors are used to create a retro effect.
Monochrome Enhances contrast to create a grainy print effect.
Miniature
Blurs some of the focus to make the image look like a
miniature.
Fisheye
Humorous effect that looks like it was shot with a fisheye
lens.
Select from among : HDR Art, Sparkling Shot, Toy Camera, Soft Focus, Light
Tone, Pop, Sepia, Monochrome, Miniature, Fisheye.
40
Recording Images
4. Touch the “ART” icon.
The intensity of the selected effect can be adjusted
as described below. Note, however, that the
“Miniature” effect cannot be adjusted.
5. Touch the level you want to select.
6. Touch “OK”.
7. Press the shutter button to shoot.
NOTE
• This function works best when the camera is made stationary by placing it on a
level surface, etc.
• With the HDR Art scene, the settings below are configured automatically.
– LED light: Off
• Shooting with this REC mode makes the shooting range narrower than normal.
• The desired effect may not be attained if the camera or subject moves during
shooting.
• Depending on shooting conditions and image composition, this REC mode may not
be able to produce the desired result.
Scene Adjustment
HDR Art Effect level
Sparkling Shot Effect type
Toy Camera Hue
Soft Focus Effect level
Light Tone Hue
Pop Effect level
Sepia Effect level
Monochrome Effect level
Fisheye Effect level
41
Recording Images
Make-up smoothes the skin texture of the subject and softens facial shadows caused
by harsh sunlight for better looking portraits.
1. In the REC mode, touch the recording mode icon (page 38).
2. Touch “½” (Make-up).
3. Touch the tab.
4. Touch “ ” (Make-up Level).
5. Touch the mode and level you want to select.
6. Touch “OK”.
7. Press the shutter button to shoot.
NOTE
• Note that Make-up can be used even when the recording mode is Premium Auto
Pro or Motion Shutter. In either of these recording modes, perform steps 3 through
7 of the above procedure to select the Make-up mode and level you want.
Recording Beautiful Portraits (Make-up)
Brightening
Lightens the skin tone of the
subject.
Natural
Produces a beautifully
natural looking skin tone.
Make-up Level
You can select a make-up
level effect intensity within
the range of 0 (Off) to +12
(Strongest).
42
Recording Images
With Motion Shutter the camera automatically triggers
a self-timer countdown whenever it detects subject
movement within an icon you specify on the monitor
screen. This means you can control operation of the
self-timer from a distance by waving your hand, so you
can include yourself in the image being shot.
1. In the REC mode, touch the recording mode
icon (page 38).
2. Touch “l” (Motion Shutter).
3. Drag the start self-timer icon “ ” and preview icon “ ” to the
location in the image where you want movement to be detected.
• Keep the two icons separate from each other. Whenever you move an icon to a
location where it overlaps the other icon, the other icon will move out of the way
automatically.
4. When everything is ready, press the shutter button all the way down.
The start self-timer icon will change to “ ” to indicate that the camera is in
standby for shooting.
5. Facing the camera, move your hand or perform some other movement
in the area of the start self-timer icon you positioned in step 3.
When the camera detects subject movement within the icon, it will automatically
start a self-timer countdown. The camera will shoot an image when the
countdown reaches zero, and then go back into Motion Shutter standby to wait
for the next trigger movement.
NOTE
• The trigger time of the Motion Shutter self-timer is fixed at two seconds.
• The preview icon “ ” will appear on the monitor screen when a snapshot is shot.
When the camera detects movement within the preview icon, it will display the
image that was shot for three seconds.
• Motion Shutter exits standby automatically after it shoots six images.
• To cancel Motion Shutter standby at any time, press the shutter button or touch the
monitor screen.
• Motion Shutter may not operate properly when there is little difference in the color
of the subject and the color of the background enclosed by the boundary, or when
the subject is located far away from the camera, making it too small.
Using Motion Shutter to Trigger a Self-timer Operation
(Motion Shutter)
43
Recording Images
Your camera is equipped with various types of zoom: HD Zoom, SR Zoom, and digital
zoom. The maximum zoom factor depends on the image size setting.
1. In the REC mode, touch the zoom icons to
zoom.
2. Press the shutter button to shoot the image.
NOTE
• Telephoto images are prone to blurring caused by camera movement when you
press the shutter button. Because of this, stabilizing the camera by placing it on a
level surface, etc. is recommended.
• Zoom operations are disabled during high speed movie recording. Perform the
zoom operation before you touch “
b” (Movie) to start recording.
• Zoom operations are not supporting during Slide Panorama shooting. The zoom
setting is fixed at full wide angle.
•“Ù” is displayed on the monitor screen while digital zoom is being used.
Shooting with Zoom
HD Zoom
Allows greater zoom capabilities by cutting out a portion of the
original image and enlarging it, without deterioration of image
quality.
SR Zoom
Applies super resolution technology to suppress image
deterioration.
Digital zoom
A digital process is used to enlarge the center of the image, so
there is deterioration of image quality.
+ (Telephoto) : Enlarges the subject and narrows the range.
– (Wide Angle) : Reduces the size of the subject and broadens the range.
Zoom icons
+ (Telephoto) – (Wide Angle)
44
Recording Images
. Zoom Factor
• The image deterioration point depends on the image size (page 60) and recording
mode (page 38). The smaller the image size, the higher the zoom factor you can
use before reaching the image deterioration point.
Auto, Premium Auto Pro, Motion Shutter
BEST SHOT (Multi SR Zoom)
ART SHOT, BEST SHOT (excluding “Multi SR Zoom”)
Image Size
Undeteriorated
Zoom Limit
Maximum
Zoom Factor
12M
1.5X 4.0X
3:2
5M 2.3X 6.2X
VGA 9.4X 15.9X
Image Size
Undeteriorated
Zoom Limit
Maximum
Zoom Factor
12M
2.0X 4.0X
3:2
5M 3.1X 6.2X
VGA 12.5X 15.9X
Image Size
Undeteriorated
Zoom Limit
Maximum
Zoom Factor
12M
1.0X 4.0X
3:2
5M 1.6X 6.2X
VGA 6.2X 15.9X
45
Recording Images
You can configure the camera so the monitor screen and lens
are facing in the same direction. This means you can shoot
with the self-timer as you compose the self-portrait on the
monitor screen.
• When using the self-timer to shoot a self-portrait, select one
of the following recording modes.
–Auto
– Premium Auto Pro
– Make-up
1. Rotate the monitor screen panel so the screen is
facing in the same direction as the lens (page 13).
2. Select “Auto”, “Premium Auto Pro” or “Make-up” for the recording
mode (pages 30, 41).
3. Drag “r” (Self-timer) downwards to specify the
self-timer countdown duration.
The camera will shoot an image when the countdown
reaches zero.
• You can set a self-timer countdown duration within
the range of two to ten seconds. The further you drag,
the longer the duration.
• To cancel an ongoing countdown, touch anywhere on
the screen except where the self-timer icon is
displayed.
• Pressing the shutter button during an ongoing
countdown will cancel the countdown and shoot an
image.
Shooting a Self-portrait
“r” (Self-timer)
46
Recording Images
The following procedure explains how to record a movie.
• You can record a movie while one of the following
recording modes is selected.
–Auto
– Premium Auto Pro
– BEST SHOT (HS Night Scene)
– Make-up
1. In the REC mode, touch “MENU”.
• If “MENU” is not displayed on the screen, touch
the tab to display it.
2. Drag upwards and downwards until you find “Movie Quality”, and then
touch to select it.
3. Touch the item whose setting you want to change.
4. To close the menu screen, touch “MENU” or press the shutter button.
To record a movie
Movie
Quality
REC Screen
Icon Display
Frame
Rate
Image Size
(Pixels)
Description
Full HD 30fps 1920
x
1080
Select this setting to record full
high-definition (Full HD)
movies. The aspect ratio of
movies recorded with this
setting is 16:9.
HD 30fps 1280
x
720
Select this setting to record
high-definition (HD) movies.
The aspect ratio of movies
recorded with this setting is
16:9.
HS240 240fps 512
x
384
Select this setting to record
high speed movies at a speed
of 240 fps.
• Audio is not recorded.
“MENU”
47
Recording Images
5. Touch “b” (Movie).
This will start recording.
• Monaural audio is also recorded during movie
recording while “Full HD” or “HD” is selected for
the movie quality setting.
• Touching “o” while recording is in progress will
cause the remaining recording time and “R” to
appear. Touch “o” again to switch back to the
elapsed recording time.
• When “Full HD” or “HD” is selected as the movie
quality, you can perform a zoom operation while
recording is in progress by touching the zoom
icons.
• When “Macro” is selected as the movie focus mode (page 65), you can half-
press the shutter button before starting recording to focus.
6. Touch “c” (Movie Stop) to stop recording.
• Each movie can be up to 29 minutes long. Movie recording stops automatically
after 29 minutes of recording. Movie recording also will stop automatically if
memory becomes full before you stop movie recording.
Minimizing the Effects of Camera Movement during Movie Recording
You can configure the camera to minimize the effects of camera movement during
Full HD and HD movie recording. Note, however, that this does not prevent image
blur due to subject movement.
High Speed Movie Recording Precautions
• When shooting a high speed movie, shoot in a well-lit environment.
• When recording a high speed movie, light source flicker can cause horizontal
bands to appear in the image. This does not indicate malfunction of the camera.
Recording time/
Remaining recording time
“b” (Movie)/
“c” (Movie Stop)
48
Recording Images
IMPORTANT!
• Spending a long time using movie recording will cause the camera to become
slightly warm to the touch. This is normal and does not indicate malfunction. The
camera may automatically adjust its monitor screen brightness in order to reduce
heat generation.
• The camera also records audio along with Full HD and HD
movies. Note the following points when shooting a movie.
– Take care that the microphone is not blocked by your
fingers, etc.
– Good audio recording results are not possible when the
camera is too far away from what you are trying to
record.
• Shooting movies for long periods in areas where
temperature is relatively high can cause digital noise (dots of light) to appear in the
movie image. A rise in the camera’s internal temperature also may force movie
recording to stop automatically. If this happens, stop recording and allow the
camera to cool down, which should cause normal operation to resume.
• Using the camera’s built-in memory or certain types of memory cards can slow
down processing speed. Whenever possible use an Ultra High-Speed Type
memory card. Note, however, that not all operations can be guaranteed even if an
Ultra High-Speed Type memory card is used. Certain movie quality settings can
result in too much time being required to record data, which can result in breaks in
the image and/or audio during playback. If this happens, the movie icon will turn
yellow on the monitor screen.
NOTE
• Except for High Speed Movie, zoom operations are supported during movie
recording (page 43). Zoom is disabled during high speed movie recording. If you
want to use zoom, perform the zoom operation before you touch “
b
” (Movie) to
start recording.
• SR Zoom (page 43) is disabled during movie recording.
• The effects of camera movement in an image become more pronounced when you
shoot close up or with a large zoom factor. Because of this, stabilizing the camera
by placing it on a level surface, etc. is recommended.
• During High Speed Movie recording, focus is fixed at the position where it was
when recording started. To focus an image, half-press the shutter button for Auto
Focus before you touch “
b
” (Movie) to start recording.
Microphone
49
Using BEST SHOT
Using BEST SHOT
BEST SHOT provides you with a collection of sample “scenes” that show a variety of
different types of shooting conditions. When you need to change the setup of the
camera, simply find the scene that matches what you are trying to achieve, and the
camera sets up for it automatically. This helps to minimize the chance of ruined
images due to poor exposure and shutter speed settings.
. To shoot an image with BEST SHOT
1. In the REC mode, touch the recording mode
icon (page 38).
• If the icon is not displayed on the screen, touch
the tab to display it.
2. Touch “b” (BEST SHOT).
This will display a menu of BEST SHOT scenes.
3. Touch the scene you want to select.
• Touching “ ” in the upper right corner of the
screen and then touching a BEST SHOT scene
will display detailed information about the scene.
4. Press the shutter button (if you are shooting a snapshot) or touch
“
b” (Movie) (if you are shooting a movie).
. BEST SHOT Precautions
• BEST SHOT scene images were not shot using this camera.
• Images shot using a BEST SHOT scene may not produce the results you expected
due to shooting conditions and other factors.
• You can modify the camera settings that are configured after you select a BEST
SHOT scene. Note, however, that the BEST SHOT settings revert to their defaults
when you select another BEST SHOT scene or turn off the camera.
• Movie recording is supported only while “HS Night Scene” is selected. Selecting
“HS240” for the movie quality setting while the “HS Night Scene” BEST SHOT
scene is selected will cause the camera to record movies using the auto recording
mode.
50
Using BEST SHOT
Multi SR Zoom uses super-resolution technology and multiple Continuous Shutter
(CS) images for higher quality and clarity across the entire image. For information
about the zoom factor, see page 44.
• When shooting with Multi SR Zoom, the camera may require more time for image
data processing between shots.
1. In the REC mode, touch “b” (BEST SHOT).
2. Touch “Multi SR Zoom” scene.
3. Press the shutter button to shoot.
NOTE
• Multi SR Zoom is effective when you want to capture delicate textures.
• With this BEST SHOT scene, the LED light setting automatically becomes off.
• Shooting with this BEST SHOT scene makes the shooting range narrower than
normal.
• The desired Multi SR Zoom effect may not be attained if the camera or subject
moves during shooting.
• Depending on shooting conditions and image composition, this BEST SHOT scene
may not be able to produce the desired result.
Shooting Clearer Snapshots (Multi SR Zoom)
51
Using BEST SHOT
With HDR (High Dynamic Range), the camera shoots a series of CS images using
different exposure settings and combines them into a final image to correct for
overexposure or underexposure of subjects of different brightness levels.
1. In the REC mode, touch “b” (BEST SHOT).
2. Touch “HDR” scene.
3. Press the shutter button to shoot.
NOTE
• This function works best when the camera is made stationary by placing it on a
level surface, etc.
• With this BEST SHOT scene, the LED light setting automatically becomes off.
• Shooting with this BEST SHOT scene makes the shooting range narrower than
normal.
• The desired HDR effect may not be attained if the camera or subject moves during
shooting.
• Depending on shooting conditions and image composition, this BEST SHOT scene
may not be able to produce the desired result.
Digitally Correcting for Overexposure and Underexposure
(HDR)
52
Using BEST SHOT
With High Speed Night Scene, the camera automatically detects shooting conditions.
When you press the shutter button, the camera will record a burst of images and
merge them in a way that minimizes image blur due to low light conditions.
1. In the REC mode, touch “b” (BEST SHOT).
2. Touch “HS Night Scene” scene.
3. When you are ready to shoot, press the shutter button.
NOTE
• With this BEST SHOT scene, the LED light setting automatically becomes off.
• When holding the camera by hand while shooting with this BEST SHOT scene,
make sure that the subjects remain as still as possible as the camera shoots the
series of images.
• Shooting with this BEST SHOT scene makes the shooting range narrower than
normal.
• Movement of the camera while it is placed on a surface may cause erroneous
judgment that it is hand held.
• If surroundings are extremely dark when shooting with “HS Night Scene”, the
camera may not be able to shoot at proper brightness due to insufficient exposure.
• When shooting with this BEST SHOT scene, the ISO sensitivity setting is fixed at
“AUTO”.
Shooting with High Speed Night Scene (HS Night Scene)
53
Using BEST SHOT
A single press of the shutter button causes the camera to record multiple images and
automatically combine them, which reduces image blur due to camera movement.
1. In the REC mode, touch “b” (BEST SHOT).
2. Touch “HS Anti Shake” scene.
3. When you are ready to shoot, press the shutter button.
NOTE
• With this BEST SHOT scene, the LED light setting automatically becomes off.
• Shooting with this BEST SHOT scene makes the shooting range narrower than
normal.
• High Speed Anti Shake may not operate properly resulting in blurred images if the
camera is moved more than the allowable range or if the subject moves during
shooting.
• When shooting with this BEST SHOT scene, the ISO sensitivity setting is fixed at
“AUTO”.
With High Speed Best Selection, the camera automatically shoots a series of images,
and selects the best one based on facial image blur, and facial expression (whether
the subject is smiling or blinking).
1. In the REC mode, touch “b” (BEST SHOT).
2. Touch “HS Best Selection” scene.
3. Press the shutter button to shoot.
• This will cause the message “Busy... Please wait...” to appear. Do not move
the camera while this message is displayed. The recording process takes
some time to complete after the message appears.
Shooting with High Speed Anti Shake (HS Anti Shake)
Shooting with Priority on Subject Faces (HS Best Selection)
54
Using BEST SHOT
NOTE
• With this BEST SHOT scene, the LED light setting automatically becomes off.
• Shooting with this BEST SHOT scene makes the shooting range narrower than
normal.
• If one or more of the faces are blurred in all of the images that are shot, they will be
blurred in the final image as well.
• The following conditions may make it impossible for the camera to determine if the
subject is blinking or smiling. This may result in a final image in which the subject is
blinking or not smiling.
– Faces that are partially or completely darkened by shadows, etc.
– Hair that is hiding or near the eyes
– Eye glasses
– Small faces
– Faces that are not looking directly at the camera
• Shooting a large group of people will cause processing of the image after shooting
to take longer.
With Slide Panorama, you move the camera to compose and record multiple images,
which are then combined to a panorama. This feature lets you shoot a panorama
which is dramatically greater than the physical capabilities of the lens.
• The final panorama image can be one of the two sizes shown below.
Slide Direction is Right or Left: Maximum 11520
x
1080 pixels
Slide Direction is Up or Down: Maximum 1920
x
7296 pixels
• Zoom operations are not supporting during Slide Panorama shooting. The zoom
setting is fixed at full wide angle.
• You can shoot a panorama image for approximately 360 degrees horizontally, or
approximately 180 degrees vertically.
Shooting a Panorama Image (Slide Panorama)
55
Using BEST SHOT
1. In the REC mode, touch “b” (BEST SHOT).
2. Touch “s” (Slide Panorama) scene.
3. Touch the icon for the slide direction (the
direction the camera will move while
shooting).
You can select one of four different slide directions:
“ ” (right), “ ” (left), “ ” (up), “ ” (down).
4. Point the camera at the start of the panorama
and half-press the shutter button to allow the
camera to focus automatically.
5. Press the shutter button the rest of the way
down and a slide cursor will appear on the
monitor screen. Slowly move the camera in
the direction indicated by the arrow on the
screen until the slide cursor reaches the
other end of its movement range (i.e. all the
way to the right when moving the camera to
the right).
• The camera will start composing the panorama
image internally when the slide cursor reached
the other end of the movement range.
• Image composing also will start automatically if
you stop moving the camera during panorama
shooting. After you stop moving the camera, the message “Busy... Please
wait...” appears as the camera processes the image. Wait until this message
disappears before using the camera. Image shooting is disabled while the
message is displayed.
Slide cursor
56
Using BEST SHOT
NOTE
• The following conditions are not compatible with Slide Panorama shooting.
– Subject whose brightness is very different from that of its surroundings due to
artificial light, sunlight, etc.
– Rivers, waves, waterfalls, or other subject with constantly changing patterns
– Sky, beach, or other subject with continuous patterns
– Camera too close to the main subject
– Moving subject
– Dark surroundings
• Slide Panorama may stop part way through in the following cases.
– Subject or camera movement
– Camera movement that is too fast or too slow
• Shooting a Slide Panorama image after half-pressing the shutter button to perform
Auto Focus may not produce the desired results if there are considerable
differences in the brightness, color, and/or focus of the individual images. If this
happens, try changing the focus position by focusing on a different subject, etc.
• Since a Slide Panorama image is created by joining multiple images together, there
may be some roughness at the point where two images are joined.
• Shooting under a flickering light source (such as fluorescent lighting) may result in
uneven brightness and/or coloring in the final Slide Panorama image.
• The exposure and white balance when shooting Slide Panorama images are fixed
at the levels measured when you half-press the shutter button at the beginning of
the operation.
• With this BEST SHOT scene, the LED light setting automatically becomes off.
57
Advanced Recording Settings
Advanced Recording Settings
The following are menu operations you can use to configure various camera settings.
. Example Menu Screen Operation
1. In the REC mode, touch “MENU”.
This will display the menu screen.
• If “MENU” is not displayed on the screen, touch
the tab to display it.
• Menu contents are different in the REC mode
and PLAY mode.
2. Drag upwards and downwards until you find the item whose setting
you want to change.
3. Touch the item.
4. Configure the setting of the item in accordance with the screen
contents.
• To cancel and exit the menu, touch “MENU” or press the shutter button.
NOTE
• Some menu items may not be available, depending on the recording mode being
use.
. Menu Operations in This Manual
Menu operations are represented in this manual as shown below. Touch the indicated
icons and items, and perform operations as they are indicated, from left to right.
Using the REC Menu
Procedure
Enter the “REC Mode” * MENU * Touch Shutter
58
Advanced Recording Settings
Procedure
Enter the “REC Mode” * MENU * Touch Shutter
You can use the procedure below to shoot a snapshot.
1. Touch “On”.
2. Point the camera at the subject.
3. When you want to shoot, touch the monitor screen.
The camera automatically comes into focus and then shoots.
• You can still use the shutter button to shoot even when “On” is selected for
Touch Shutter.
NOTE
• When “Auto” is selected as the recording mode, the camera will automatically focus
on the point you touch.
• When “Premium Auto Pro” is selected as the recording mode, the camera will
automatically determine the optimum focus point(s) and focus automatically.
Procedure
Enter the “REC Mode” * MENU * Self-timer
With the Self-timer, pressing the shutter button starts a timer. The shutter is released
and the image is shot after a fixed amount of time.
• You can interrupt an ongoing Self-timer countdown by pressing the shutter button.
Using Touch Shutter (Touch Shutter)
Using the Self-timer (Self-timer)
Setting
REC Screen
Icon Display
Description
10 sec 10-second Self-timer
2 sec
2-second Self-timer
• When shooting under conditions that slow down the
shutter speed, you can use this setting to prevent
image blur due to camera movement.
Off None Self-timer is disabled.
59
Advanced Recording Settings
NOTE
• The Self-timer configured with the above menu cannot be used under the following
conditions.
– Slide Panorama (page 54)
– Motion Shutter (page 42)
– When the monitor screen and lens are facing in the same direction
Procedure
Enter the “REC Mode” * MENU * LED
Use the LED light when shooting where lighting is dim. The effectiveness of the LED
light is reduced the further you are from the subject.
IMPORTANT!
• Do not turn on the LED light near a person’s eyes and do not allow anyone to look
directly into the light.
• You should compose the image so the main subject is in the center of the image
when using the LED light.
• Since the camera is equipped with a wide-angle lens, the center tends to be
brighter while the periphery tends to be darker.
Using the LED Light (LED)
Setting
REC Screen
Icon Display
Description
Auto
The LED lights automatically under dark shooting
conditions when the shutter button is half-pressed to
focus or full-pressed to shoot.
On LED always lights when shooting.
Off None LED never lights.
60
Advanced Recording Settings
Procedure
Enter the “REC Mode” * MENU * Image Size
This setting can be used to configure snapshot image size.
• The initial factory default image size setting is 12M (12 million pixels).
• Selecting “3:2” records images with an aspect ratio of 3:2, which matches the
standard aspect ratio of print paper.
• You should regard the print paper sizes suggested here as guidelines only (200 dpi
print resolution).
Changing the Image Size (Image Size)
Image Size
(Pixels)
REC Screen
Icon Display
Suggested Print
Size and
Application
Description
12M
(4000
x
3000)
Poster Print
Good detail for better clarity even
for images cropped from the
original on a computer, etc.
3:2
(4000
x
2656)
Poster Print
5M
(2560
x
1920)
A4 Print Good detail
VGA
(640
x
480)
E-Mail
Image files are smaller, which is
better when attaching images to e-
mail. However, images are
relatively coarser.
61
Advanced Recording Settings
. Pixels and image size
A digital camera image is a collection of small
dots called “pixels”. The more pixels there are
in an image, the more detail there will be.
However, you generally can do with fewer
pixels when printing an image (L size)
through a print service, attaching an image to
e-mail, when viewing the image on a
computer, etc.
The size of an image indicates how many
pixels it contains, and is expressed as horizontal pixels
x
vertical pixels.
Example:
• Note that larger images have more pixels, so they take up more memory space.
• For information about image size and number of images that can be stored, see
page 120.
• For information about movie image size, see page 46.
• For information about resizing existing snapshots, see page 81.
Procedure
Enter the “REC Mode” * MENU * Movie Quality
This setting can be used to configure movie image quality settings and to select either
normal movie recording or High Speed Movie recording. For information about movie
image quality settings, see page 46.
Image size pixels
12M 4000
x
3000 (Approximately 12 million pixels)
5M 2560
x
1920 (Approximately 5 million pixels)
Movie Image Quality Settings (Movie Quality)
Pixel
62
Advanced Recording Settings
Procedure
Enter the “REC Mode” * MENU * EV Shift
You can manually adjust an image’s exposure value (EV value) before shooting it.
• Exposure Compensation Range: –2.0 EV to +2.0 EV
• Unit: 1/3 EV
1. Touch a level you want to set.
• To cancel exposure compensation, change the EV value to 0.0.
2. Touch “OK”.
This applies the exposure compensation value. The exposure compensation
value you set remains in effect until you change it or turn off the camera (which
causes it to revert to “0.0”).
NOTE
• When shooting under very dark or very bright conditions, you may not be able to
obtain satisfactory results even after performing exposure compensation.
Correcting Image Brightness (EV Shift)
–2.0 +2.0
Decreases the EV value. A lower EV
value is best for dark-color subjects and
for shooting outdoors on a clear day.
Increases the EV value. A higher EV
value is best for light-colored subjects
and backlit subjects.
63
Advanced Recording Settings
Procedure
Enter the “REC Mode” * MENU * White Balance
You can adjust white balance to match the source of light available where you are
shooting and avoid the blue cast that results when shooting outdoors when it is
cloudy, and the green cast that results when shooting under fluorescent lighting.
1. Touch the type of white balance you want to select.
You can see the affect of the white balance setting you select on the monitor
screen.
• When “‡ Auto WB” is selected for the white balance setting, the camera
automatically determines the white point of the subject. Certain subject colors
and light source conditions can cause problems when the camera tries to
determine the white point, which makes proper white balance adjustment
impossible. If this happens, select the white balance setting that matches your
shooting conditions (Daylight, Overcast, etc.).
2. Touch “OK”.
Adjusting White Balance (White Balance)
Setting Description
Auto WB
Configures the camera to adjust white balance
automatically
Daylight For shooting outdoors on a clear day
Overcast
For shooting outdoors on an overcast rainy day, in the
shade, etc.
Shade
For shooting on a clear day in the shade of trees or
buildings
Day White Fluor
For shooting under white or day white fluorescent
lighting
Daylight Fluor For shooting under daylight fluorescent lighting
Tungsten For shooting under light bulb lighting
Manual WB
For configuring the camera manually to suit a particular
light source.
1
Touch “· Manual WB”.
2
In the location where you plan to
shoot, point the camera at a
blank white piece of paper so it
fills the entire monitor screen.
3
Touch an area of the screen
where no icon is located.
The white balance setting is retained even if you turn
off the camera.
‡
¤
'
“
†
–
«
·
Blank white paper
64
Advanced Recording Settings
Procedure
Enter the “REC Mode” * MENU * ISO
ISO sensitivity is a measure of sensitivity to light.
• Since higher ISO sensitivity values tend to result in digital noise in images, the
camera performs a noise filtering process. Because of this, it may take relatively
longer for the camera to finish recording an image after it is shot. You will not be
able to perform any operation while image recording is in progress.
Specifying ISO Sensitivity (ISO)
Setting Description
AUTO Adjusts sensitivity automatically according to conditions
ISO 100
Lower
sensitivity
Higher
sensitivity
Slow shutter speed
Fast shutter speed (Set
for shooting in dimly lit
areas.)
Less noise
Some coarseness
(increased digital noise)
ISO 200
ISO 400
ISO 800
ISO 1600
ISO 3200
65
Advanced Recording Settings
Procedure
Enter the “REC Mode” * MENU * Focus
Changing to a different focus mode can help to achieve better focus.
*1 The focus range is the distance from the lens surface.
*2 The distance depends on shooting conditions.
Selecting a Focus Mode (Focus)
Settings
REC Screen
Icon Display
Type of Shot
Focus Mode Approximate Focus Range
*
1
Snapshot Movies Snapshot Movies
AF
(Auto
Focus)
None
General
recording
Automatic
Fixed
focal point
8 cm to
9
(infinity)
(3.1"
to
9
)
46 cm to
9
(infinity)
(18.1"
to
9
)
Macro
Close ups
8 cm to 50 cm
(3.1" to 19.7")
17 cm to 27 cm
(6.7" to 10.6")
PF (Pan
Focus)
Shooting
with a
relatively
wide focus
range
Fixed
focal point
Fixed focal
point
*
2
46 cm to
9
(infinity)
(18.1"
to
9
)
Infinity
Focus
Scenery and
other distant
subjects
Fixed Infinity (Wide Angle)
66
Advanced Recording Settings
Using Focus Lock
“Focus lock” is a technique you can use when you want
to compose an image in which the subject you want to
focus on is not within the focus frame in the center of
the screen.
1. Align the monitor screen’s focus frame with
the subject you want to focus on and then
half-press the shutter button.
2. Keeping the shutter button half-pressed
(which maintains the focus setting), move
the camera to compose the image.
3. When you are ready to shoot the image,
press the shutter button the rest of the way
down.
NOTE
• Focus lock also locks exposure (AE).
• The focus frame does not appear on the display when the Touch Shutter is
enabled (On).
Procedure
Enter the “REC Mode” * MENU * Review
While Review is turned on, the camera will display an image immediately after it is
recorded.
• When “Type 1” is selected, the aperture, shutter speed, and ISO sensitivity, will be
orange if the Auto Exposure is not correct.
Turning on Image Review (Review)
Type 1 Displays a full-screen view of the image for about one second.
Type 2
Displays a Review image in the lower left corner of the monitor screen.
Touching the Review image will enter the PLAY mode and display a
full-screen view of the image.
Off Turns off review image display
Focus frame
Subject to be focused on
67
Advanced Recording Settings
Procedure
Enter the “REC Mode” * MENU * Self-portrait check
Pressing the shutter button on the frame to shoot a
self-portrait while this function is enabled (“On”), will
display an image for review before it is saved. When
this function is disabled (“Off”), self-portrait images are
stored directly into memory as soon as you shoot
them. The self-portrait check function can be used
under the conditions described below.
1. Touch “On”.
2. Press the shutter button on the frame to shoot the image.
3. Review the recorded image.
• When this function is enabled, you can perform the following image review and
store operations after shooting a self-portrait.
Checking a Snapshot before Saving It (Self-portrait check)
Recording mode : Auto, Premium Auto Pro, Make-up
Monitor screen : Pointed in the same direction as the lens.
Setting Description
Zooms the review image.
• Two-finger squeeze and spread screen operations can also be
used to zoom the review image.
• An enlarged image can be scrolled by dragging on the screen.
Returns a zoomed image to its original size.
Returns to image recording standby without saving the currently
displayed review image.
Saves the currently displayed review image and returns to image
recording standby.
• Touching “ ” while a zoomed review image is displayed still
saves the image in normal (not zoomed) size.
Shutter button
68
Viewing Snapshots and Movies
Viewing Snapshots and Movies
See page 33 for the procedure for viewing snapshots.
1. Touch “p” (PLAY) to enter the PLAY mode.
2. Touch “ú” or “õ”, or drag left or right
across the screen image to scroll through
the movies until the one you want is
displayed.
• To scroll at high speed, touch and hold “ú” or
“õ”.
3. Touch “6” (Movie) to start playback.
Viewing Snapshots
Viewing a Movie
Image quality
Movie icon: 6
Movie recording time
Playback in progress Playback paused
Touch “|”.
Touch “6”.
Progress bar
69
Viewing Snapshots and Movies
Movie Playback Controls
• Playback may not be possible for movies not recorded with this camera.
Pause/Play Touch “|” (pause) or “6” (play).
Fast forward/
Fast reverse
During playback, touch “
{” (fast reverse) or “}” (fast
forward).
• Each touch of either button increases the speed of the
fast forward or fast reverse operation.
• To return to normal playback speed, touch “
6”.
Stop playback During playback, touch “.”.
Volume adjustment
During playback, touch “
n” and then drag the volume bar
to the desired level.
• Volume can be adjusted only while movie playback is in
progress.
1 frame forward/
back
While playback is paused, touch “
z” or “y”.
• Touching and holding this icon advances frames
continuously.
Information display
on/off
Touch the screen.
Movie editing
Pause movie play at the location where you want to cut,
and then touch “
~” (page 70).
70
Viewing Snapshots and Movies
The Movie Editing feature lets you cut out a specific part of a movie.
1. Enter the PLAY mode and then start playback of the movie you want to
edit.
2. When playback reaches the location where you want to cut, touch “|”
to pause.
3. Touch “~”.
4. Touch the option that specifies what you want to cut.
5. Touch “Cut”.
The selected cut operation will take considerable time to complete. Don’t try to
perform any camera operation until the “Busy... Please wait...” message
disappears from the monitor screen. Note that a cut operation can take a long
time if the movie being edited is long.
IMPORTANT!
• When you edit a movie, only the result is saved. The original movie is not retained.
An editing operation cannot be undone.
NOTE
• A movie that is shorter than five seconds cannot be edited.
• Editing of movies recorded with a different type of camera is not supported.
• You will not be able to edit a movie if the amount of remaining memory capacity is
less than the size of the movie file you want to edit. If there is not enough memory
available, delete files you no longer need to free up more.
• Splitting of a movie into two movies and splicing of two different movies into a
single movie are not supported.
Editing a Movie on the Camera (Movie Editing)
Previous Cut
Cuts everything from the beginning of the movie up to
the current location.
Next Cut
Cuts everything from the current location to the end of
the movie.
¡
¢
71
Viewing Snapshots and Movies
1. Touch “p” (PLAY) to enter the PLAY mode.
2. Touch “ú” or “õ” or drag upwards or
downwards to display the panorama image
you want to view.
• To scroll at high speed, touch and hold “ú” or
“õ”.
3. Touch “6” to play the panorama.
Panorama playback causes the image to scroll left, right, up, or down.
Playback Controls
NOTE
• The following functions cannot be performed on a panorama image.
Movie Editing, Rotation
You can use the slideshow mode to automatically scroll through all of the images in
camera memory.
1. In the PLAY mode, touch “q” for the
playback mode.
This will start the slideshow.
•If “
q” is not displayed on the screen, touch the
tab to display it.
NOTE
• All operations are disabled while the slideshow is transitioning from one image to
another.
• The time required for transition from one image to another may be longer in the
case of an image that was not recorded with this camera.
• To return to normal (single image) display, touch the screen.
Viewing a Panorama Image
Pause/Play Touch “|” (pause) or “6” (play).
Stop playback During playback, touch “.”.
Scroll the panorama image While playback is paused, drag the screen.
Information display on/off Touch the screen.
Playing a Slideshow on the Camera (Slideshow)
72
Viewing Snapshots and Movies
The image menu shows multiple images on a single screen.
1. In the PLAY mode, touch “]”.
This displays the image menu.
• Touch “û” or “ü” or drag upwards or
downwards to scroll to the next page of images.
• To view the normal (single image) display mode,
touch the image your want to view or touch “
ë”.
• In the case of a movie, the first image in the
movie is displayed.
• A question mark (?) will be displayed for images
that cannot be displayed for some reason.
Snapshots can be zoomed on the monitor screen up to 8X.
• The actual available zoom factors depend on the size of the original image.
1. In the PLAY mode, touch “ú” or “õ” or drag left or right to display the
image you want to view.
2. Spread your thumb and forefinger (page 17)
on the displayed image to enlarge it.
• Dragging an enlarged screen image will change
the part of the image that is displayed.
• Squeezing your thumb and forefinger (page 17)
on the displayed image will reduce it in size.
– When monitor screen contents are turned on, a
graphic in the lower right corner of the screen
shows what part of the zoomed image is
currently displayed.
• Touching “ú” or “õ” while an enlarged image is
displayed will scroll to the next sequential image
while maintaining the current zoom factor.
• To return to normal (single image) display, touch
“ë”.
Viewing the Image Menu
Zooming an On-screen Image
Image area
Current display area
Zoom factor
73
Viewing Snapshots and Movies
Use a commercially available HDMI cable to
connect the camera to the TV.
• Use a commercially available HDMI cable
that is marked with the logo shown to the
right.
1. Open the frame (page 13).
2. Hook your nail into the groove of the
[CARD HDMI] cover and pull the cover in
the direction indicated by the arrow to
open it.
3. Turn off the camera and use a commercially available HDMI cable to
connect the camera to a TV.
• Make sure that the camera is turned off before plugging in or unplugging the
cable. Check the user documentation that comes with the TV for information
about requirements before plugging into or unplugging from the TV.
4. Turn on the TV and select its video input mode.
If the TV has more than one video input, select the one where the camera is
connected.
Viewing Snapshots and Movies on a TV Screen
[CARD HDMI] cover
HDMI connector
HDMI cable
(commercially
available)
HDMI micro connector
HDMI output (micro)
HDMI input
74
Viewing Snapshots and Movies
5. Turn on the camera.
The camera monitor screen will shows a remote controller
image. The TV screen will show a recorded image.
• The contents of the remote controller image will depend on
the type of image that is displayed on the TV screen.
6. Touch the camera monitor screen to perform
operations.
NOTE
• Use a HDMI cable with a plug that is compatible with the camera’s HDMI micro
connector on one end, and a plug that is compatible with your TV’s HDMI
connector on the other end.
• Proper image and/or audio output and other operations may not be possible with
some devices.
• Connecting the camera to the HDMI connector of another device can damage both
the camera and the other device. Never connect two HDMI output connectors to
each other.
• Disconnect the HDMI cable when you are not using HDMI output. The camera’s
monitor screen may not operate normally while the HDMI cable is connected.
• Audio is monaural.
• Audio is initially output by the camera at maximum volume. When you first start
displaying images, set the TV volume control at a relatively low level and then
adjust it as required.
• To select the digital signal format, see page 98.
75
Other Playback Functions (PLAY)
Other Playback Functions (PLAY)
The following are menu operations you can use to configure various camera settings.
. Example Menu Screen Operation
1. In the PLAY mode, touch “MENU”.
This will display the menu screen.
• If “MENU” is not displayed on the screen, touch
the tab to display it.
• Menu contents are different in the REC mode
and PLAY mode.
2. Touch the item whose setting you want to change.
3. Configure the setting of the item in accordance with the screen
contents.
• To cancel and exit the menu, touch “MENU” or press the shutter button.
. Menu Operations in This Manual
Menu operations are represented in this manual as shown below. Touch the indicated
icons and items, and perform operations as they are indicated, from left to right.
Using the PLAY Menu
Procedure
Enter the PLAY Mode * MENU * Protect
76
Other Playback Functions (PLAY)
Procedure
Enter the PLAY Mode * Display snapshot * MENU * Paint
You can use this function to draw on, write on, or stamp information into a recorded
snapshot. If the original image size is 3M or larger, the post-paint image is saved as a
3M size image.
1. On the right side of the monitor screen,
touch “ ” or “ ”.
2. Touch the pen type or the stamp you want to
use.
3. Use the pen to write text or draw figures, or
use the stamp to stamp information.
4. Touch “OK”.
5. Touch “Yes”.
This will save the image as a new image.
. Paint Functions
NOTE
• After selecting “ ”, you can change either the color (or eraser) or thickness
setting only. To change the other setting, select “ ” again.
Performing Paint Operations on an Image (Paint)
Exits paint without saving an image.
For selecting the pen color and thickness for drawing or writing. Also
can be used to select the eraser and its thickness.
For selecting the stamp type.
Goes back to the previous screen.
Saves the image.
77
Other Playback Functions (PLAY)
Procedure
Enter the PLAY Mode * Display snapshot * MENU * Cut out subject
You can draw an outline around a subject (person or object) and extract it from the
snapshot. You can then insert the extracted subject into another snapshot.
1. Touch the drawing tool you want and then draw a boundary around the
subject that you want to extract.
• The boundary line should be continuous, which means it starts and ends at the
same point.
2. Touch “OK”.
This will cause the background of the subject you outlined to become gray.
Extracting an Image from a Snapshot (Cut out subject)
Drawing Tool Line Type Description
•
Thin
Draws a line for cutting out a subject.
‚
Thick
„
– Erases a drawn line.
Extracted Subject Another Snapshot Final Combined Image
78
Other Playback Functions (PLAY)
3. Touch “”” to select the area to be extracted and then touch “OK”.
This will display the cut out subject.
• To scroll back one screen, touch the “u” icon in the upper right corner of the
display.
4. After confirming that the part of the image to be extracted is the way
you want, touch “OK”.
This saves the extracted image.
NOTE
• You cannot extract from an extracted subject. Attempting to do so will cause an
error.
Extracted subject screen
”
Original image with subject
extracted
79
Other Playback Functions (PLAY)
Procedure
Enter the PLAY Mode * MENU * Paste subject
You can add the camera’s built-in characters or frames to snapshots, or you can
insert characters you create with “Cut out subject” (page 77) into snapshots.
• Only an image that satisfies the following conditions can be used as a background
image.
– It must be a snapshot recorded with this camera or a snapshot transferred to this
camera’s memory.
– It must be an image with an aspect ratio of 4:3.
1. Touch “ú” or “õ” or drag left or right to scroll through images. Select
image you want to use as the background and then touch “OK”.
2. Touch “ú” or “õ” or drag left or right to scroll though subjects. Select
the subject you want to insert and then touch “OK”.
3. Touch “+” (zoom in) and “–” (zoom out) to
adjust the size of the subject. You also can
drag the subject around the screen to
reposition it.
4. After the subject’s size and position are the
way you want, touch “OK”.
This inserts the subject into the background image.
NOTE
• Performing a delete or format operation will not delete the built-in subjects.
Inserting a Subject into another Snapshot or Adding a Built-in
Frame to a Snapshot (Paste subject)
B
80
Other Playback Functions (PLAY)
Procedure
Enter the PLAY Mode * MENU * Protect
You can protect images to prevent them from being
deleted.
• A protected image will be indicated by “›”.
IMPORTANT!
• Note that even if a file is protected, it will be deleted if you perform the format
operation (page 99).
Protecting a File Against Deletion (Protect)
All Files On Protects all files.
All Files Off Unprotects all files.
Select
Protects and unprotects specific files.
1
Touch “û” or “ü” or drag upwards or downwards to display
the image you want to protect.
2
Touch an image to be protected,
and “›” will appears on the
image.
You can repeat steps
1
and
2
as many times as necessary to
select multiple images.
3
Touch “OK”.
To unprotect an image, touch it in step
2
of the above
procedure to remove “›”.
81
Other Playback Functions (PLAY)
Procedure
Enter the PLAY Mode * MENU * Rotation
1. Touch “ú” or “õ” or drag upwards or downwards to display the image
you want to rotate.
2. Touch “Rotate”.
This will rotate the image 90 degrees to the left.
3. When the image is in the orientation you want, touch “ ”.
NOTE
• Rotation of a panorama image is not supported.
• Note that this procedure does not actually change the image data. It simply alters
how the image is displayed on the camera’s monitor screen.
• An image that has been protected or zoomed cannot be rotated.
Procedure
Enter the PLAY Mode * MENU * Resize
You can reduce the size of a snapshot and save the result as a separate snapshot.
The original snapshot is also retained. You can select resize an image to one of three
image sizes: 5M, 3M, VGA.
1. Touch “ú” or “õ” or drag left or right to display the image you want to
resize.
2. Touch a size.
This resizes the image to the selected size and saves the result as a new
photograph.
NOTE
• Resizing a 3:2 size snapshot will create an image with an aspect ratio of 4:3, with
both sides cut off.
• The recording date of the resized version of the snapshot will be the same as the
recording date of the original snapshot.
Rotating an Image (Rotation)
Resizing a Snapshot (Resize)
82
Other Playback Functions (PLAY)
Procedure
Enter the PLAY Mode * MENU * Trimming
You can crop a snapshot to trim parts you do not need, and save the result in a
separate file. The original snapshot is also retained.
1. Touch “ú” or “õ” or drag left or right to display the image you want to
crop.
2. Touch “OK”.
3. Drag the image until the part you want to
keep is displayed.
• To enlarge the image, touch “+”, or touch the
screen with your thumb and forefinger and then
spread them apart. To reduce the size of the
image, touch “–”, or touch the screen with your
thumb and forefinger and then squeeze them
together.
4. Touch “OK”.
This will crop the image, leaving only the displayed
part.
NOTE
• The image produced by cropping a 3:2 image will have an aspect ratio of 4:3.
• The recording date of the cropped image will be the same as the recording date of
the original snapshot.
Cropping a Snapshot (Trimming)
Represents
snapshot area
Part of snapshot that is
currently displayed
Zoom factor
83
Printing
Printing
There are a variety of different ways to print images stored on a computer. This
section shows one standard printing example.
. Printing on a Windows Computer
1. Use the procedure under “Viewing and Storing Images on a Computer”
(page 86) to store the image you want to print, and then display the
image on your computer screen.
2. Windows XP users: Click “File” and then “Print”.
Windows 8, Windows 7, Windows Vista users: Click “Print” and then
“Print”.
3. Configure the desired print settings and then print.
Windows XP users: Follow the instructions on the print wizard that appears
configure settings and then print.
Windows 8, Windows 7, Windows Vista users: Configure print settings and then
click “Print”.
Professional Print Service
You can take a memory card that contains the images you want
to print to a professional print service and have them printed.
Printing on a Home Printer
You can use a printer equipped with a memory card slot
to print images directly from a memory card. For details,
see the user documentation that comes with your
printer.
Printing with a Computer
After transferring the images to your computer, use
commercially available software to print.
Printing with a Computer
84
Printing
. Printing on a Macintosh
1. Use the procedure under “Connecting the Camera to Your Computer
and Saving Files” (page 89) to store the image you want to print, and
then display the image on your Macintosh screen.
2. Click “File” and then “Print”.
3. Configure print settings and then click “Print”.
This will print the selected image.
85
Using the Camera with a Computer
Using the Camera with a Computer
You can perform the operations described below while the camera is connected to a
computer.
The procedures you need to perform are different for Windows and the Macintosh.
Things you can do using a computer...
Save images to a
computer and
view them there
• Save images and view them manually
(USB connection) (pages 86, 89).
Play back and
edit movies
• You can play back movies (pages 88, 91).
• To edit movies, use commercially
available software as required.
• Windows users should refer to “Using the Camera with a Windows Computer”
on page 85.
• Macintosh users should refer to “Using the Camera with a Macintosh” on page
89.
Using the Camera with a Windows Computer
When you
want to do
this:
Operating
System Version
Install this software:
See
page:
Save images
to a computer
and view them
there manually
Windows 8,
Windows 7,
Windows Vista,
Windows XP (SP3)
Installation not required.
86
Play movies
Windows 8,
Windows 7,
Windows Vista,
Windows XP (SP3)
Movies can be played back using
QuickTime 7.
• You need to download QuickTime 7 on
the Web if you want to use it.
88
86
Using the Camera with a Computer
You can connect the camera to your computer in order to view and store images
(snapshot and movie files).
IMPORTANT!
• Never unplug the USB cable, or operate the camera while viewing or storing
images. Doing so can cause data to become corrupted.
NOTE
• You also can use your computer’s card slot (if it has one) or a commercially
available card reader to access image files directly from the camera’s memory
card. For details, see the user documentation that comes with your computer.
. To connect the camera to your computer and save files
1. Turn off the camera and then
use the micro USB cable that
comes with the camera to
connect it to your computer.
• For details about connecting to
the camera and precautions
when connecting, see page 22.
2. Turn on the camera.
• The first time you connect the camera to your computer with the USB cable, an
error message may appear on your computer. If this happens, disconnect and
then reconnect the USB cable.
3. Windows 8 users: Click “Desktop” and then “Explorer”.
Windows 7, Windows Vista users: Click “Start” and then “Computer”.
Windows XP users: Click “Start” and then “My Computer”.
4. Double-click “Removable Disk”.
• Your computer recognizes the memory card loaded in the camera (or built-in
memory if there is no card) as a removable disk.
Viewing and Storing Images on a Computer
Never use your computer to modify, delete, move, or rename any image files
that are in the camera’s built-in memory or on its memory card.
Doing so can cause problems with the camera’s image management data, which
will make it impossible to play back images on the camera and can drastically alter
remaining memory capacity. Whenever you want to modify, delete, move, or
rename an image, do so only on images that are stored on your computer.
USB
Micro USB cable
(included with camera)
[USB] port
87
Using the Camera with a Computer
5. Right-click the “DCIM” folder.
6. On the shortcut menu that appears, click “Copy”.
7. Windows 8 users: Click “Documents”.
Windows 7, Windows Vista users: Click “Start” and then “Documents”.
Windows XP users: Click “Start” and then “My Documents”.
• If you already have a “DCIM” folder in “Documents” (Windows 8, Windows 7,
Windows Vista) or “My Documents” (Windows XP), the next step will overwrite
it. If you want to keep the existing “DCIM” folder, you need to change its name
or move it to a different location before performing the next step.
8. Windows 8 users: On the “Documents” menus, click “Home” and then
“Paste”.
Windows 7 users: On the “Documents” “Organize” menu, select
“Paste”.
Windows Vista users: On the “Documents” “Edit” menu, select
“Paste”.
Windows XP users: On the “My Documents” “Edit” menu, select
“Paste”.
This will paste the “DCIM” folder (and all the image files it contains) into your
“Documents” (Windows 8, Windows 7, Windows Vista) or “My Documents”
(Windows XP) folder. You now have a copy of the files that are in camera
memory on your computer.
9. After you finish copying images, disconnect the camera from the
computer.
On the camera, press [p] (Power) to turn off the camera. After checking to make
sure that the back lamp is unlit or lit red, disconnect the USB cable.
. To view images you copied to your computer
1. Double-click the copied “DCIM” folder to open it.
2. Double-click the folder that contains the images you want to view.
3. Double-click the image file you want to view.
• For information about file names, see “Memory Folder Structure” on page 93.
88
Using the Camera with a Computer
To play back a movie, first copy it to your computer and then double-click the movie
file. Some operating systems may not be able to play back movies. If this happens,
you need to install separately available software.
• If you are unable to play back movies, go to the URL below to download
QuickTime 7 and install it on your computer.
http://www.apple.com/quicktime/
. Minimum Computer System Requirements for Movie Playback
The minimum system requirements described below are necessary to play back
movies recorded with this camera on a computer.
• The above are recommended system environments. Configuring one of these
environments does not guarantee proper operation.
• Certain settings and other installed software may interfere with proper playback of
movies.
. Movie Playback Precautions
• Be sure to move the movie data to the hard disk of your computer before trying to
play it. Proper movie playback may not be possible for data accessed over a
network, from a memory card, etc.
• Proper movie playback may not be possible on some computers. If you experience
problems, try the following.
– Quit any other applications you have running, and stop resident applications.
Playing Movies
Operating System : Windows 8, Windows 7, Windows Vista, Windows XP (SP3)
CPU : Image Quality “Full HD”, “HD”:
Core 2 Duo 3.0GHz or higher
Image Quality “HS240”:
Pentium 4 2.0GHz or higher
Required Software: QuickTime 7
89
Using the Camera with a Computer
IMPORTANT!
• Never unplug the USB cable, or operate the camera while viewing or storing
images. Doing so can cause data to become corrupted.
• The camera does not support operation with Mac OS X 10.0. Operation is
supported with Mac OS 10.1, 10.2, 10.3, 10.4, 10.5, 10.6, 10.7, and 10.8 (using the
OS standard USB driver) only.
NOTE
• You also can use your computer’s card slot (if it has one) or a commercially
available card reader to access image files directly from the camera’s memory
card. For details, see the user documentation that comes with your computer.
Using the Camera with a Macintosh
When you want to do
this:
Operating System
Version
Install this software:
See
page:
Save images to your
Macintosh and view
them there manually
OS X Installation not required. 89
Save images to your
Macintosh
automatically/Manage
images
OS X
Use iPhoto, which comes
bundled with some
Macintosh products.
–
Play movies OS X
You can playback with
QuickTime, which comes
bundled with your operating
system.
91
Connecting the Camera to Your Computer and Saving Files
Never use your computer to modify, delete, move, or rename any image files
that are in the camera’s built-in memory or on its memory card.
Doing so can cause problems with the camera’s image management data, which
will make it impossible to play back images on the camera and can drastically alter
remaining memory capacity. Whenever you want to modify, delete, move, or
rename an image, do so only on images that are stored on your computer.
90
Using the Camera with a Computer
. To connect the camera to your computer and save files
1. Turn off the camera and then
use the micro USB cable that
comes with the camera to
connect it to your Macintosh.
• For details about connecting to
the camera and precautions
when connecting, see page 22.
2. Turn on the camera.
• The camera’s back lamp will light green or amber at this time. In this mode,
your Macintosh recognizes the memory card loaded in the camera (or the
camera’s built-in memory if it does not have a memory card loaded) as a drive.
The appearance of the drive icon depends on the Mac OS version you are
using.
• The first time you connect the camera to your Macintosh with the USB cable,
an error message may appear on your computer. If this happens, disconnect
and then reconnect the USB cable.
3. Double-click the camera’s drive icon.
The camera’s back lamp will light green at this time. In this mode, your Macintosh
recognizes the memory card loaded in the camera (or the camera’s built-in
memory if it does not have a memory card loaded) as a drive. The appearance of
the drive icon depends on the Mac OS version you are using.
4. Drag the “DCIM” folder to the folder to which you want to copy it.
5. After the copy operation is complete, drag the drive icon to Trash.
6. Disconnect the camera from the computer.
On the camera, press [p] (Power) to turn off the camera. After checking to make
sure that the back lamp is unlit or lit red, disconnect the USB cable.
USB
Micro USB cable
(included with camera)
[USB] port
91
Using the Camera with a Computer
. To view copied images
1. Double-click the camera’s drive icon.
2. Double-click the “DCIM” folder to open it.
3. Double-click the folder that contains the images you want to view.
4. Double-click the image file you want to view.
• For information about file names, see “Memory Folder Structure” on page 93.
• An image that was rotated on the camera will be displayed on your Macintosh
screen in its original (unrotated) orientation.
You can use QuickTime, which comes bundled with your operating system, to play
back movies on a Macintosh. To play back a movie, first copy it to your Macintosh
and then double-click the movie file.
. Minimum Computer System Requirements for Movie Playback
The minimum system requirements described below are necessary to play back
movies recorded with this camera on a computer.
• The above are recommended system environments. Configuring one of these
environments does not guarantee proper operation.
• Certain settings and other installed software may interfere with proper playback of
movies.
. Movie Playback Precautions
Proper movie playback may not be possible on some Macintosh models. If you
experience problems, try the following.
– Upgrade to the latest version of QuickTime.
– Shut down other applications that are running.
IMPORTANT!
• Be sure to move the movie data to the hard disk of your Macintosh before trying to
play it. Proper movie playback may not be possible for data accessed over a
network, from a memory card, etc.
Playing a Movie
Operating System : Image Quality “Full HD”: Mac OS X 10.4.11 or higher
Image Quality “HD”, “HS240”: Mac OS X 10.3.9 or higher
Required Software: QuickTime 7 or higher
92
Using the Camera with a Computer
The camera creates a file each time you shoot a snapshot, record a movie, or
perform any other operation that stores data. Files are grouped by storing them in
folders. Each file and folder has its own unique name.
• For details about how folders are organized in memory, see “Memory Folder
Structure” (page 93).
• You can view folder and file names on your computer. For details about how file
names are displayed on the camera’s monitor screen, see page 9.
• The total number of folders and files allowed depends on the image size and
quality, and capacity of the memory card being used for storage.
The camera stores images you shoot in accordance with the Design Rule for Camera
File System (DCF).
. About DCF
The following operations are supported for DCF-compliant images. Note, however,
that CASIO makes no performance guarantees concerning these operations.
• Transferring this camera’s DCF-compliant images to another manufacturer’s
camera and view them.
• Printing this camera’s DCF-compliant images on another manufacturer’s printer.
• Transferring another camera’s DCF-compliant images to this camera and view
them.
Files and Folders
Name and Maximum Number Allowed Example
File
Each folder can contain up to 9999 files named
CIMG0001 through CIMG9999. The extension
on the file name depends on the file type.
26th file name:
Folders
Folders are named from 100CASIO to
999CASIO.
There can be up to 900 folders in memory.
100th folder name:
Memory Card Data
CIMG0026.JPG
Extension
Serial number (4 digits)
100CASIO
Serial number (3 digits)
93
Using the Camera with a Computer
. Memory Folder Structure
DCIM Folder
Recording Folder
Image File
Movie File
Recording Folder
Recording Folder
. Supported Image Files
• Image files shot with this camera
• DCF-compliant image files
This camera may not be able to display an image, even if it is DCF-compliant. When
displaying an image recorded on another camera, it may take a long time for the
image to appear on this camera’s monitor screen.
. Built-in Memory and Memory Card Data Handling Precautions
• Whenever copying memory contents to your computer, you should copy the DCIM
folder and all of its contents. A good way to keep track of multiple DCIM folders it to
change their names to dates or something similar after you copy them to your
computer. If you later decided to return a DCIM folder to the camera, however, be
sure to change its name back to DCIM. The camera is designed to recognize only a
root file with the name DCIM. Note the camera also will not be able to recognize the
folders inside the DCIM folder unless they have the names they originally had
when you copied them from the camera to your computer.
• Folders and files must be stored in accordance with the “Memory Folder Structure”
shown on page 93 in order for the camera to be able to recognize them correctly.
DCIM
100CASIO
CIMG0001.JPG
CIMG0002.MOV
101CASIO
102CASIO
94
Other Settings (Set Up)
Other Settings (Set Up)
This section explains menu items that you can use to configure settings and perform
other operations in both the REC mode and PLAY mode.
Procedure
MENU * Setup * Screen
You can use the following procedure to change the brightness of the monitor screen.
Procedure
MENU * Setup * Sounds
• Setting a volume level of 0 mutes output.
For information about menu operations, see page 57.
Adjusting Monitor Screen Brightness (Screen)
Auto
With this setting, the camera detects available light levels and
automatically adjusts the brightness of the monitor screen accordingly.
+2
Brightness that is greater than +1, which makes the screen easier to view.
This setting consumes more power.
+1 Bright setting for outdoor use, etc. Brightness that is greater than 0.
0 Normal monitor screen brightness for indoor use, etc.
–1
Screen brightness for viewing in a dark environment without disturbing
others around you.
Configuring Camera Sound Settings (Sounds)
Startup
Toggles the operation tone between on and off.
Half Shutter
Shutter
Operation
Volume
Operation
Vol
Specifies the sound volume. This volume setting is also
used during video output (from the HDMI port) (page 73).
Playback
Vol
Specifies the volume of movie audio output. This volume
setting is also used during video output (from the HDMI
port) (page 73).
95
Other Settings (Set Up)
Procedure
MENU * Setup * Adjust
1. Touch the value you want to change (year,
month, day, hour, minute).
2. Touch “8” or “2” to change the currently
selected value.
• You can specify a date from 2001 to 2049.
• Be sure to select your Home City (page 96)
before setting the time and date. If you set the
time and date while the wrong city is selected for
your Home City, the times and dates of all of the
World Time cities (page 96) will be wrong.
• To switch between 12-hour and 24-hour format, touch the 12/24 hour switch
icon.
• Touching and holding “8” or “2” scrolls at high speed.
3. Touch “OK”.
Procedure
MENU * Setup * Timestamp
You can configure the camera to stamp the recording date only, or date and time in
the lower right corner of each snapshot.
• Once date and time information is stamped into a snapshot, it cannot be edited or
deleted.
Example: July 10, 2015, 1:25 p.m.
• Even if you do not stamp the date and/or time with Timestamp, you can do so later
using some printing application.
• Stamping is performed in accordance with the date and time settings (page 95) and
the display style settings (page 97).
Setting the Camera’s Clock (Adjust)
Time Stamping Snapshots (Timestamp)
Date 2015/7/10
Date & Time 2015/7/10 1:25pm
Off No stamping of date and/or time
12/24 hour switch icon
96
Other Settings (Set Up)
Procedure
MENU * Setup * World Time
You can use the World Time screen to view the current time in a zone that is different
from your Home City when you go on a trip, etc. World Time displays the current time
in 162 cities in 32 time zones around the globe.
1. Touch “Destination”.
• To change the geographic area and city for the time where you normally use
the camera, select “Home”.
2. Touch “City”.
• To specify summer time for the destination city, select “DST” and then select
the “On” setting (Summer time is used in some geographical areas to advance
the current time setting by one hour during the summer months).
3. Drag upwards and downwards to display the area of the destination
city and then touch “OK”.
4. Drag upwards and downwards until you find the city you want, and
then touch to select it.
IMPORTANT!
• Before configuring World Time settings, make sure that the Home City setting is
the place where you live or normally use the camera. If it isn’t, select “Home” on the
screen in step 1 and configure the Home City, date, and time settings as required
(page 95).
Use this procedure to specify the time displayed by the camera for your home city
and destination.
1. Touch “Time”.
2. Touch “Home” or “Destination”.
This will configure the time setting of the location you touched in the previous
step.
Configuring World Time Settings (World Time)
Setting a Travel Destination
Selecting the Time Display
97
Other Settings (Set Up)
Procedure
MENU * Setup * Date Style
You can select from among three different styles for the date.
Example: July 10, 2015
Procedure
MENU * Setup * Language
. Specify the display language you want.
1. On the menu screen, touch “Setup”.
2. Touch “Language”.
3. Drag upwards and downwards until you find
the language you want, and then touch to
select it.
• Camera models sold in certain geographic areas may not support display language
selection.
Specifying the Date Style (Date Style)
YY/MM/DD 15/7/10
DD/MM/YY 10/7/15
MM/DD/YY 7/10/15
Specifying the Display Language (Language)
98
Other Settings (Set Up)
Procedure
MENU * Setup * HDMI
Use this setting to select the digital signal format when connecting to a TV with an
HDMI cable.
* 1080i corresponds to 1080 60i, but not 1080 50i. Because of this, the required
output method may be 576p when outputting to a digital TV in a PAL reception area
that does not support 1080i 60i. If you are in a PAL reception area and nothing is
displayed automatically, change the setting to 576p.
• If an image does not appear when “Auto” is selected as the output method, try
changing this setting to something else.
Procedure
MENU * Setup * Startup
Selecting “On” for Startup causes a built-in startup screen to appear on the monitor
screen whenever the camera is turned on.
Selecting the HDMI Terminal Output Method (HDMI)
Auto
This setting will cause the format to change automatically in accordance
with the connected TV. Normally, you should use this mode.
1080i 1080i format output*
480p 480p format output
576p 576p format output
Displaying a Startup Screen at Power On (Startup)
99
Other Settings (Set Up)
Procedure
MENU * Setup * Format
If a memory card is loaded in the camera, this operation will format the memory card.
It will format built-in memory if no memory card is loaded.
• The format operation will delete all contents on the memory card or in built-in
memory. It cannot be undone. Make sure you do not need any data currently on
the card or in built-in memory before you format it.
• Formatting built-in memory or a memory card will delete all protected images
stored there.
• Check the battery level before starting a format operation and make sure it is not
too low. Formatting may not be performed correctly and the camera may stop
operating normally if the camera powers down while formatting is in progress.
Procedure
MENU * Setup * Reset
See page 113 for details about the camera’s factory default settings.
The settings below are not reset.
World Time settings, clock settings, date style, screen language
Formatting Built-in Memory or a Memory Card (Format)
Resetting the Camera to Factory Defaults (Reset)
100
Appendix
Appendix
*
DANGER
This symbol indicates information that, if ignored or applied incorrectly, creates the
danger of death or serious personal injury.
*
WARNING
This indication stipulates matters that have the risk of causing death or serious injury
if the product is operated incorrectly while ignoring this indication.
*
CAUTION
This indication stipulates matters that have the risk of causing injury as well as
matters for which there is the likelihood of occurrence of physical damage only if the
product is operated incorrectly while ignoring this indication.
Symbol Examples
Safety Precautions
!
This circle with a line through it (-) means that the indicated action must not
be performed. Indications within or nearby this symbol are specifically
prohibited. (The example at left indicates that disassembly is prohibited.)
$
The black dot (0) means that the indicated action must be performed.
Indications within this symbol are actions that are specifically instructed to be
performed. (The example at left indicates that the power plug must be
unplugged from the electrical socket.)
*
DANGER
. Rechargeable Battery
• To charge the battery, use only the method specifically described in this
manual. Attempting to charge the battery by an unauthorized means
creates the risk of battery overheating, fire, and explosion.
• Do not expose or immerse the battery in fresh water or salt water. Doing
so can damage the battery, and cause deterioration of its performance
and loss of service life.
• The battery is intended for use with a CASIO Digital Camera only. Use
with any other device creates the risk of the battery damage, or
deterioration of battery performance and service life.
+
%
+
101
Appendix
• Failure to observe any of the following precautions creates the risk of battery
overheating, fire, and explosion.
– Never use or leave the battery near open flame.
– Do not expose the battery to heat or fire.
– Make sure the battery is oriented correctly when charging it.
– Never carry or store the battery together with items that can conduct electricity
(necklaces, pencil lead, etc.).
– Never disassemble the battery, pierce it with a needle, or expose it to strong
impact (hit it with a hammer, step on it, etc.), and never apply solder to it.
Never place the battery into a microwave oven, dehumidifier, high-pressure
generating device, etc.
– Never remove the outer sticker from the battery.
• Should you ever notice leakage, strange odor, heat generation,
discoloration, deformation, or any other abnormal condition while using,
charging, or storing a battery, immediately remove it from the camera
and keep it away from open flame. Also, do not use the affected battery after the
abnormal symptoms disappear.
• Do not use or leave the battery under direct sunlight, in an automobile
parked in the sun, or in any other area subject to high temperatures.
Doing so can damage the battery, and cause deterioration of its
performance and loss of service life. Also, these conditions can cause the
battery to swell to the point that you may not be able to remove it.
• Battery fluid can damage your eyes. Should battery fluid get into your
eyes accidentally, immediately rinse them with clean tap water and then
consult a physician.
*
DANGER
-
+
-
+
102
Appendix
*
WARNING
. Smoke, abnormal odor, overheating, and other abnormalities
• Continued use of the camera while it is emitting smoke or strange odor,
or while it is overheating creates the risk of fire and electric shock.
Immediately perform the following steps whenever any of the above
symptoms are present.
1. Turn off the camera.
2. If you are using the USB-AC adapter to power the camera, unplug the power
plug from the power outlet. Also, remove the battery from the camera, taking
care to protect yourself against burn injury.
3. Contact your retailer or nearest CASIO authorized service center.
. Keep Away From Fire
• Never expose the camera to fire, which can cause it to explode and
creates the risk of fire and personal injury.
. Avoid Use While In Motion
• Never use the camera to record or play back images while operating an
automobile or other vehicle, or while walking. Looking at the monitor
while in motion creates the risk of serious accident.
. LED Light
• Never use the LED light while it is pointed in the direction of a person
operating a motor vehicle. Doing so can interfere with the driver’s vision
and create the risk of accident.
. USB-AC Adapter
• Misuse of USB-AC adapter creates the risk of fire and electric shock. Be sure to
observe the following precautions.
– Use only the specified USB-AC adapter.
– Never use the USB-AC adapter with another device.
– Use a power outlet that matches the power supply specified for the
USB-AC adapter.
– Never plug the USB-AC adapter or power cord into a wall outlet that is shared
by other devices, or into a shared extension cord.
– Never locate the USB-AC adapter near a stove or other heating device.
• Misuse of the USB-AC adapter can cause them to become damaged, creating
the risk of fire and electric shock. Be sure to observe the following precautions.
– Never place heavy objects on the USB-AC adapter or subject it to
direct heat.
– Do not modify the USB-AC adapter, allow it to become damaged, or
forcibly bend it.
– Do not twist or pull on the power cord.
– When in use, locate the cord where it will not be tripped over.
$
-
-
-
-
-
103
Appendix
• Never touch the power plug while your hands are wet. Doing so creates
the risk of electric shock.
• Should the power cord or power plug become damage, contact your
retailer or nearest CASIO authorized service center.
• Do not use the USB-AC adapter in areas where liquids
* might spill on
them. Liquids create the risk of fire and electric shock.
* Liquids: Water, sports drinks, seawater, animal or pet urine, etc.
• Do not place a flower vase or any other liquid container on top of the
USB-AC adapter. Water creates the risk of fire and electric shock.
• Do not touch the camera or USB-AC adapter during lightning storms.
If a power cord was included with your camera
• The power cord that comes with the camera is designed for use in the
country where the camera was purchased. If you use the camera in
another country, be sure to use a power cord that conforms to that
country’s ratings and power supply voltage. Use of an improper power cord
creates the risk of fire and electric shock.
• Before going out, be sure to unplug the USB-AC adapter from the power
outlet and put in a place away from objects used by animals and pets.
An animal or pet chewing on the power cord can cause it short, leading
to the risk of fire.
. Water and Foreign Matter
• Water, other liquids, or foreign matter (especially metal) getting inside
the camera creates the risk of fire and electric shock. Immediately
perform the following steps whenever any of the above symptoms are
present. Particular care is required when using the camera where it is raining or
snowing, near the ocean or other body of water, or in a bathroom.
1. Turn off the camera.
2. If you are using the USB-AC adapter to power the camera, unplug the power
plug from the power outlet. Also, remove the battery from the camera, taking
care to protect yourself against burn injury.
3. Contact your retailer or nearest CASIO authorized service center.
. Disassembly and Modification
• Never try to take it apart or modify it in any way. Doing so creates the
risk of electric shock, burn injury, and other personal injury. Be sure to
leave all internal inspection, maintenance, and repair up to your retailer
or nearest CASIO authorized service center.
*
WARNING
"
+
-
%
1
+
+
%
!
104
Appendix
. Dropping and Rough Treatment
• Continued use of the camera after it is damaged by dropping or other
rough treatment creates the risk of fire and electric shock. Immediately
perform the following steps whenever any of the above symptoms are
present.
1. Turn off the camera.
2. If you are using the USB-AC adapter to power the camera, unplug the power
plug from the power outlet. Also, remove the battery from the camera, taking
care to protect yourself against burn injury.
3. Contact your retailer or nearest CASIO authorized service center.
. Memory Cards
• Memory cards are small and present a risk of accidentally being
swallowed by infants and young children. Keep memory cards out of the
reach of infants and young children. If a memory card is ever swallowed
accidentally, contact a physician immediately.
. Precaution when Camera is On
• Do not touch the camera for long periods while it is on. The camera
becomes warm when on, and long term contact creates the risk of low-
temperature burns.
*
WARNING
-
+
+
105
Appendix
*
CAUTION
. USB-AC Adapter
• Misuse of the USB-AC adapter creates the risk of fire and electric shock. Make
sure you observe the following precautions.
– Never cover the USB-AC adapter or power cord with a quilt, blanket,
or other cover while it is in use, and do not use it near a heater. Doing
so can interfere with heat radiation and cause the area around them
to become hot.
– Do not use detergent when cleaning the power cord, the USB-AC adapter, or
the USB cable (especially the plugs and jacks).
– Insert the power plug into the wall outlet as far as it will go.
– Unplug the power plug from the wall outlet before leaving the camera
unattended for long periods, such as when leaving on a trip, etc.
– At least once a year, use a cloth or vacuum cleaner to clean any dust build up
on the prongs of the power plug and in the area around them.
– (Power cord included with your camera) When unplugging from the wall outlet,
never pull on the power cord. Grasp the power plug and pull.
. Rechargeable Battery
• If battery charging does not end normally within the specified charging
time, stop charging anyway and contact your local CASIO authorized
service center. Continued charging creates the risk of battery
overheating, fire, and explosion.
• Be sure to read the user documentation that comes with the camera
before using or charging the battery.
• Store batteries in a location that cannot be reached by infants and young
children. When using a battery where infants and young children are
present, be on guard to ensure that they do not have the chance to
remove the battery from the camera.
• Do not leave batteries near areas used by pets. A pet chewing on a
battery can lead to accidents caused by the battery leaking, overheating,
or exploding.
• Should fluid from a battery accidentally get onto clothing or your skin,
immediately rinse it off with clean tap water. Prolonged contact with
battery fluid can cause skin irritation.
. Connections
• Never plug any devices that are not specified for use with this camera
into connectors. Connecting a non-specified device creates the risk of
fire and electric shock.
. Unstable Locations
• Never place the camera on an unstable surface, on a high shelf, etc.
Doing so can cause the camera to fall, creating the risk of personal
injury.
-
+
+
+
+
-
+
-
-
106
Appendix
. Locations To Be Avoided
• Never leave the camera in any of the following types of locations. Doing so
creates the risk of fire and electric shock.
– Areas subject to large amounts of humidity or dust
– Food preparation areas or other locations where oil smoke is present
– Near heaters, on a heated carpet, in areas exposed to direct sunlight,
in a closed vehicle parked in the sun, or other areas subject to very high
temperatures
. Monitor Screen
• Do not apply strong pressure to the LCD panel surface or subject it to
strong impact. Doing so can cause the display panel glass to crack and
lead to personal injury.
• Should the monitor screen ever become cracked, never touch any of the
liquid inside the monitor screen. Doing so creates the risk of skin
inflammation.
• Should monitor screen liquid ever get into your mouth, immediately rinse
your mouth out and contact your physician.
• Should monitor screen liquid ever get into your eyes or onto your skin,
immediately rinse with clean water for at least 15 minutes and contact
your physician.
. Backing Up Important Data
• Always keep backup copies of important data in camera memory by
transferring it to a computer or other storage device. Note that data can
be deleted in the case of camera malfunction, repair, etc.
. Memory Protection
• Whenever replacing the battery, be sure to follow the correct procedure
as described in the documentation that comes with the camera.
Incorrectly replacing the battery can result in corruption or loss of data in
camera memory.
. LED Light
• Do not fire the LED light or use other light emitting functions while the
light is pointed in the direction of and too close to a person’s face. Doing
so creates the risk of momentary loss of eyesight.
. Transport
• When in an aircraft or medical facility, comply with instructions of
personnel in charge. Electromagnetic waves and other signals emitted
by the camera can adversely affect other equipment.
*
CAUTION
-
-
1
+
+
+
+
-
+
107
Appendix
. Data Error Precautions
Your digital camera is manufactured using precision digital components. Any of the
following creates the risk of corruption of data in camera memory.
– Removing the battery or memory card while the camera is performing some
operation
– Removing the battery or memory card while the back lamp is flashing green after
turning off the camera
– Disconnecting the USB cable while communication is in progress
– Shooting with a battery that quickly goes low right after it is charged
• Shooting with a battery that quickly goes low right after it is charged can also
cause camera malfunction. Replace the battery with a new one immediately.
– Other abnormal operations
Any of the above conditions can cause an error message to appear on the monitor
screen (page 119). Perform the action indicated by the message that appears.
. Operating Environment
• Operating Temperature Requirements: 0 to 40°C (32 to 104°F)
• Operating Humidity: 10 to 85% (non condensation)
• Do not place the camera in any of the following locations.
– In an area exposed to direct sunlight, or large amounts of moisture, dust, or sand
– Near heating or cooling devices, or in other areas subjected to extreme changes
in temperature or humidity
– Inside of a motor vehicle on a hot day, or in an area subjected to strong vibration
. Condensation
Sudden and extreme temperature changes, such as when the camera is moved from
the outdoors on a cold winter day into a warm room, can cause water droplets called
“condensation” to form on the interior and the exterior of the camera, which creates
the risk of malfunction. To prevent condensation from forming seal the camera in a
plastic bag before changing locations. Then leave the bag sealed to allow the air
inside to naturally change to the same temperature as the air in the new location.
After that, remove the camera from the bag and open the battery cover for a few
hours.
Precautions During Use
108
Appendix
. Lens
• Never apply too much force when cleaning the surface of the lens. Doing so can
scratch the lens surface and cause malfunction.
• You may sometimes notice some distortion in certain types of images, such as a
slight bend in lines that should be straight. This is due to the characteristics of
lenses, and does not indicate malfunction of the camera.
. Caring for your camera
• Never touch the lens with your fingers. Finger smudges, dirt, and other foreign
matter on the lens can interfere with proper operation of the camera. Use a blower
or other means to keep the lens and flash window free of dirt and dust, and wipe
gently with a soft, dry cloth.
• To clean the camera, wipe it with a soft, dry cloth.
. Old Rechargeable Battery Handling Precautions
• Insulate the positive and negative terminals with tape, etc.
• Do not peel the covering off of the battery.
• Do not try to take the battery apart.
. Discarding or Transferring Ownership of a Memory Card or the
Camera
The format and delete functions of the camera do not actually delete files from the
memory card. The original data remains on the card. Note that responsibility for the
data on a memory card lies with you. The following procedures are recommended
whenever you discard a memory card or the camera, or if you transfer ownership to
another party.
• When discarding a memory card, either physically destroy the memory card or use
commercially available data delete software to completely delete the data on the
memory card.
• When transferring ownership of a memory card to another party, use commercially
available data deletion software to completely delete the data on it.
• Use the format function (page 99) to completely delete the data in built-in memory
before discarding or transferring ownership of the camera.
. Other Precautions
The camera becomes slightly warm during use. This is normal and does not indicate
malfunction.
109
Appendix
. Copyrights
Except for your own personal enjoyment, unauthorized use of snapshots or movies of
images whose rights belong to others, without the permission of the right holder, is
forbidden by copyright laws. In some cases, shooting of public performances, shows,
exhibitions, etc. may be restricted entirely, even if it is for your own personal
enjoyment. Regardless of whether such files are purchased by you or obtained for
free, posting them on a website, a file sharing site, or any other Internet site, or
otherwise distributing them to third parties without the permission of the copyright
holder is strictly prohibited by copyright laws and international treaties. For example,
uploading or distributing on the Internet images of TV programs, live concerts, music
videos, etc. that were photographed or recorded by you may infringe upon the rights
of others. Note that CASIO COMPUTER CO., LTD. shall not be held liable for use of
this product in any way that infringes on the copyrights of others or that violates
copyright laws.
Note that trademark
™ and registered trademark
®
are not used within the text of this
manual.
• microSDXC Logo is a trademark of SD-3C, LLC.
• Microsoft, Windows, Windows Vista, Windows 7, and Windows 8 are registered
trademarks or trademarks of Microsoft Corporation in the United States and other
countries.
• Macintosh, Mac OS, QuickTime, and iPhoto are trademarks of Apple Inc.
• HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing, LLC.
• EXILIM is a registered trademark of CASIO COMPUTER CO., LTD.
• All other company or product names mentioned herein are registered trademarks
or trademarks of their respective companies.
Any and all unauthorized copying, distribution, and transfer for commercial purposes
of the software provided by CASIO for this product are prohibited.
The following terms, which are used in this manual, are registered trademarks or
trademarks of their respective owners.
110
Appendix
. If the camera’s back lamp starts flashing red...
If the back lamp starts flashing red during charging, it means that further charging is
not possible for one of the reasons below. Perform the actions described below to
correct the problem and then try charging again.
Ambient temperature or the temperature of the battery is abnormally high
or low
Unplug the USB cable from the camera and wait for a while until the camera is within
the temperature range of 15°C to 35°C (59°F to 95°F), and then try charging again.
Safety timer activated
A battery that has not been used for a long time, certain types of computers, and
connection conditions can cause charging to take longer than normal. If charging
takes longer than about five hours, a safety timer will terminate it automatically, even
if the battery is not fully charged. If the battery has not been used for a very long time,
charging may terminate automatically after only about 60 minutes.
1) Using a battery that has not been used for a long time.
Disconnect and then reconnect the USB cable to resume charging.
2) Insufficient power supply when connected to computer
The camera can be charged only via a USB 2.0 standard USB port. Connect
directly to a USB port what supplies a current of 500mA.
For details about the power supply capacity of a computer’s USB port, contact the
manufacturer of the computer. Though disconnecting and then reconnecting the USB
cable will resume charging, you may need to do so repeatedly if the power supply
capacity of the computer is low.
Power Supply
Charging
If problems persist after you perform the above steps or if the battery fails to
charge after 5 hours, it could mean that the battery is faulty. Contact your nearest
CASIO authorized service center.
111
Appendix
. Precautions during Use
• Operation provided by a battery under cold conditions is always less than operation
under normal temperatures. This is due to the characteristics of the battery, not the
camera.
• Charge the battery in an area where the temperature is within the range of 15°C to
35°C (59°F to 95°F). Outside this temperature range charging can take longer than
normal or even fail.
• Do not tear or remove the battery outer label.
• If a battery provides only very limited operation following a full charge, it probably
means the battery has reached the end of its service life. Replace the battery with a
new one.
. Storage Precautions
• Storing the battery for a long time while it is charged can cause deterioration of
battery characteristics. If you do not plan to use a battery for some time, fully use
up its charge before storing it.
• Always remove the battery from the camera when you are not using it. A battery left
in the camera can discharge and go dead, which will require some time to charge
when you need to use the camera.
• Store batteries in a cool, dry place (20°C (68°F) or lower).
• To prevent over discharging of an unused battery, fully charge it, and then load it in
the camera and fully use up the charge about once every six months.
. Precautions during Use
• The bundled USB-AC adaptor is designed for operation with any power supply in
the range of 100V to 240V AC, 50/60Hz. Note, however, that the shape of the
power plug depends on each country or geographic area. Before taking the camera
and USB-AC adaptor along on a trip, check with travel agent about the power
supply requirements in your destination(s).
• Do not connect the USB-AC adaptor to a power supply through a voltage converter
or similar device. Doing so can lead to malfunction.
. Extra Batteries
• Taking along extra fully charged batteries (NP-150) is recommended while on a trip
in order to avoid not being able to shoot images due to the battery going dead.
Battery Precautions
Using the Camera in another Country
112
Appendix
See page 26 for information about supported memory cards and how to load a
memory card.
. Using a Memory Card
• If a memory card starts to behave abnormally during image playback, you can
restore normal operation by reformatting it (page 99). However, it is recommended
that you always take along multiple memory cards whenever using the camera far
away from the home or office.
• As you record data to and delete data from a memory card a number of times, it
loses its ability to retain data. Because of this, periodic re-formatting of a memory
card is recommended.
• Electrostatic charge, electrical noise, and other phenomena can cause data to
become corrupted or even lost. Make sure that you always back up important data
on other media (CD-R, CD-RW, hard disk, etc.).
. Memory Card Handling Precautions
Certain types of memory cards can slow down processing speed. Whenever possible
use an Ultra High-Speed Type memory card. Note, however, that not all operations
can be guaranteed even if an Ultra High-Speed Type memory card is used. Certain
movie quality settings can result in too much time being required to record data,
which can result in breaks in the image and/or audio during playback. If this happens,
the movie icon will turn yellow on the monitor screen.
Using a Memory Card
113
Appendix
The tables in this section show the initial default settings on menus that appear in the
REC mode and PLAY mode when you reset the camera (page 99).
• A dash (–) indicates an item whose setting is not reset or an item for which there is
no reset setting.
IMPORTANT!
• Some menu items may not be available, depending on the recording mode being
use.
. REC Menu
. PLAY Menu
Reset Initial Default Settings
Touch Shutter Off
Self-timer Off
LED Off
Image Size 12M
Movie Quality Full HD
EV Shift 0.0
White Balance Auto
ISO Auto
Focus AF
Review Type 2
Self-portrait
check
Off
Setup * See below.
Paint –
Cut out subject –
Paste subject –
Protect –
Rotation –
Resize –
Trimming –
Setup * See below.
114
Appendix
. Setup Menu
Screen Auto
Sounds
Startup: On /
Half Shutter: On /
Shutter: On /
Operation: On /
Operation Vol: 3 /
Playback Vol: 7
Adjust –
Timestamp Off
World Time –
Date Style –
Language –
HDMI Auto
Startup Off
Format –
Reset –
Version –
115
Appendix
When things don’t go right...
Troubleshooting
Problem Possible Cause and Recommended Action
Power Supply
Power does not turn
on.
1)The battery of new camera is not charged. Charge the
battery before using the camera.
2)The camera battery may be dead. Charge the battery (page
18). If the battery goes dead soon after being charged, it
means the battery has reached the end of its life and needs
to be replaced. Purchase a separately available CASIO
NP-150 rechargeable lithium ion battery.
The camera
suddenly powers
down.
1)The camera is designed to turn off automatically after no
operation is performed for about five minutes. Turn power
back on.
2)The battery may be dead. Charge the battery (page 18).
3)The camera’s protection function may have activated
because camera temperature is too high. Turn off the
camera and wait until it cools down before trying to use it
again.
Power will not turn
off. Nothing
happens when a
button is pressed.
Remove the battery from the camera and then reload them.
Charging
The back lamp does
not light red and the
battery won’t
charge.
1)Unplug the USB cable from the camera and then plug it back
in again.
2)Remove the battery from the camera and then reload it
(page 19).
Image Recording
Image is not
recorded when the
shutter button is
pressed.
1)If the camera is in the PLAY mode, touch “r” (REC) to
enter the REC mode.
2)If the message “Memory Full” appears, transfer images to
your computer, delete images you no longer need, or use a
different memory card.
Auto Focus does
not focus properly.
1)If the lens is dirty, clean it off.
2)The subject may not be in the center of the focus frame when
you compose the image.
3)You may be moving the camera when shooting. Try shooting
with the “HS Anti Shake” BEST SHOT scene, place the
camera on a tabletop or some other stable surface, or find
some way to fix the camera in place.
4)You may be pressing the shutter button all the way without
waiting for Auto Focus. Half-press the shutter button and
allow enough time for Auto Focus to focus.
116
Appendix
The subject is out of
focus in the
recorded image.
The image may not be focused properly. When composing the
image, make sure the subject is located inside the focus frame.
The LED light does
not light.
1)If the battery is dead, charge it (page 18).
2)LED light operation is disabled automatically whenever you
are shooting with a BEST SHOT scene and HDR Art. Select
a different recording mode (page 38).
Camera powers
down during Self-
timer countdown.
The battery may be dead. Charge the battery (page 18).
The monitor screen
image is out of
focus.
1)You may be using “Macro” for scenery or portraits. Use Auto
Focus for scenery and portrait shots (page 65).
2)You may be trying to use Auto Focus or “Infinity Focus” when
shooting a close-up shot. Use the “Macro” for close ups
(page 65).
There is digital
noise in images.
1)Sensitivity may have been increased automatically for a dark
subject, which increases the chance of digital noise. Use a
light or some other means to illuminate the subject.
2)Shooting with a snapshot with a high ISO sensitivity setting
can increase digital noise in the image. If digital noise
becomes a problem, try changing the ISO sensitivity setting
to a lower value.
A recorded image
was not saved.
1)Camera power may have been turned off before the save
operation was complete, which will result in the image not
being saved. If the battery indicator shows , charge the
battery as soon as possible (page 18).
2)You may have removed the memory card from the camera
before the save operation was complete, which will result in
the image not being saved. Do not remove the memory card
before the save operation is complete.
Though available
lighting is bright, the
faces of people in
the image are dark.
Not enough light is reaching the subjects. Adjust EV shift to the
+ side (page 62).
Night shots come
out bad.
Use the “HS Night Scene” BEST SHOT scene (page 49) when
shooting at night.
Subjects are too
dark when shooting
images in a
seashore or ski
area.
Sunlight reflected by water, sand, or snow, can cause
underexposure of images. Adjust EV shift to the + side (page
62).
Problem Possible Cause and Recommended Action
117
Appendix
The image is out of
focus during movie
recording.
1)Focusing may not be possible because the subject is outside
the focus range. Shoot within the allowable range.
2)The lens may be dirty. Clean the lens (page 108).
3)During High Speed Movie recording, focus is fixed at the
position where it was when recording started. To focus an
image, half-press the shutter button for Auto Focus before
you touch “b” (Movie) to start recording.
Playback
The color of the
playback image is
different from what
appears on the
monitor screen
when shooting.
Sunlight or light from another source may be shining directly
into the lens when you are shooting. Position the camera so
sunlight does not shine directly into the lens.
Images are not
displayed.
This camera cannot display non-DCF images recorded onto a
memory card using another digital camera.
Images cannot be
rotated.
Note that you cannot edit the following types of snapshots.
• Panorama images
• Snapshots recorded with another camera
• Extracted subjects
File Deletion
A file cannot be
deleted.
The file may be protected. Unprotect the file (page 80).
Other
The wrong date and
time are displayed,
or the wrong date
and time are being
stored along with
image data.
The date and time setting is off. Set the correct date and time
(page 95).
The messages on
the display are in
the wrong language.
The wrong display language is selected. Change the display
language setting (page 97).
Images cannot be
transferred over a
USB connection.
1)The USB cable may not be connected securely. Check all
connections.
2)If the camera is not turned on, turn it on.
3)Your computer may not be able to recognize the camera if
you connect via a USB hub. Always connect directly to the
computer’s USB port.
Problem Possible Cause and Recommended Action
118
Appendix
Language selection
screen appears
when the camera is
turned on.
1)You did not configure initial settings after purchasing the
camera or the camera may have been left with a dead
battery. Check the camera setup (pages 24, 95).
2)There may be a problem with the camera’s memory data. If
this is the case, perform the reset operation to initialize the
camera’s setup (page 99). After that, configure each setting.
If the language selection screen does not re-appear when
you turn the camera on, it means that the camera’s memory
management data has been restored.
If the same message appears after you turn power back on,
contact your retailer or a CASIO authorized service center.
There are various
indicators and
values on the
monitor screen.
The monitor screen shows indicators and other information
about shooting conditions and the image you are recording.
You can touch the tab and then touch the “DISP” to select what
information you want to include on the display (page 8).
The time and date
settings configured
the first time after
purchasing the
camera are reset to
their factory defaults
when I remove the
camera’s battery.
Load the camera’s battery and reconfigure the time and date
settings (page 24). Do not remove the battery from the camera
for at least 24 hours after configuring time and date settings.
After that, the settings will not be reset if you remove the
battery.
• If the time and date are reset to their factory default settings
when you remove the battery after it has been loaded for
more than 24 hours, it could mean that the camera’s setting
memory is defective. Contact your retailer or a CASIO
authorized service center.
Buttons are not
responsive right
after the power has
been turned on.
With large capacity memory cards there is a delay after the
power has been turned on before the buttons become
responsive.
Problem Possible Cause and Recommended Action
119
Appendix
Display Messages
ALERT
The camera’s protection function may have activated
because camera temperature is too high. Turn off the
camera and wait until it cools down before trying to use it
again.
Battery is low. Battery power is low.
Card ERROR
There is something wrong with the memory card. Turn off the
camera, remove the memory card and then reload it into the
camera. If this message re-appears when you turn the
camera back on, format the memory card (page 99).
IMPORTANT!
• Formatting a memory card deletes all its files. Before
formatting, try transferring recoverable files to a computer
or some other storage device.
File could not be
saved because
battery is low.
Battery power is low, so an image file could not be saved.
Folder cannot be
created.
You are trying to record a file while there are already
9999 files stored in the 999th folder. If you want to record
more, delete files you no longer need (page 34).
LENS ERROR
This message appears and the camera turns off whenever
lens performs some unexpected operation. If the same
message appears after you turn power back on, contact a
CASIO authorized service center or your original retailer.
Memory Full
Memory is full with images you recorded and/or files saved
by editing operations. Delete files you no longer need (page
34).
Record Error
Image compression could not be performed for some reason
during image data storage. Shoot the image again.
SYSTEM ERROR
Your camera system is corrupted. Contact your retailer or a
CASIO authorized service center.
There are no files. There are no files in built-in memory or on the memory card.
This card is not
formatted.
The memory card loaded in the camera is not formatted.
Format the memory card (page 99).
B
120
Appendix
Snapshot
Movies
*1
Built-in memory capacity after formatting (Approx. 52.1MB)
*2 When using a 16GB microSDHC memory card (SanDisk Corporation). Number of
image and recording time values depend on the memory card you are using.
*3 The allowable recording time will be shorter if the capacity of the microSD memory card
you are using is smaller than the maximum size of one file.
*4 The data transfer rate of built-in memory is not sufficient for Full HD movies. Whenever
possible use an Ultra High-Speed Type memory card.
Number of Snapshots/Movie Recording Time
Image Size
(Pixels)
Approximate
File Size
Built-in Memory
*1
Recording Capacity
microSD
Memory Card
*2
Recording Capacity
12M (4000
x
3000) 4.13 MB 7 2286
3:2 (4000
x
2656) 3.62 MB 9 2728
5M (2560
x
1920) 1.72 MB 14 4283
VGA (640
x
480) 290 KB 91 26809
Image Size /
Pixels
(Audio)
Approximate
Data Rate
(Frame Rate)
Maximum
File Size
Built-in
Memory
*1
Recording
Capacity
Maximum
Recording
Time with
microSD
Memory
Card
*2
File Size
of
1-minute
Movie
Continuous
Recording
Time per
Movie
*3
Full HD
1920
x
1080
(Monaural)
14.2 Megabits/
second
(30 frames/
second)
4 GB or
29 minutes
27 seconds
*
4
2 hours
14 minutes
55 seconds
106.5 MB 29 minutes
HD
1280
x
720
(Monaural)
10.9 Megabits/
second
(30 frames/
second)
36 seconds
2 hours
56 minutes
25 seconds
81.8 MB 29 minutes
HS240
512
x
384
(No audio)
40.0 Megabits/
second
(240 frames/
second)
9 seconds
48 minutes
5 seconds
300.0 MB
12 minutes
58 seconds
121
Appendix
• Snapshot and movie recording capacity values are approximate and intended for
reference only. Actual capacity depends on image contents.
• File size and data rate values are approximate and intended for reference only. Actual
values depend on the type of image being shot.
• When using a memory card with a different capacity, calculate the number of images as a
percentage of 16GB.
• The time it takes to play back a high speed movie will be different from the time it takes to
record it. If you record a high speed movie for 10 seconds, for example, it will take
80 seconds to play it back.
• Each movie can be up to 29 minutes long. Movie recording stops automatically after
29 minutes of recording.
Specifications
File Format Snapshots:
JPEG (Exif Version 2.3; DCF 2.0 standard)
Movies:
MOV format, H.264/AVC standard, IMA-ADPCM (monaural)
Recording Media Built-in Memory (Image Storage Area: 52.1MB*)
microSD/microSDHC/microSDXC
* Built-in memory capacity after formatting
Recorded Image Sizes Snapshots:
12M (4000
x
3000), 3:2 (4000
x
2656), 5M (2560
x
1920),
VGA (640
x
480)
Movies:
Full HD (1920
x
1080 30 fps), HD (1280
x
720 30 fps),
HS240 (512
x
384 240 fps)
Effective Pixels 12.1 Megapixels
Imaging Element Size: 1/2.3-inch square pixel high-speed CMOS
Total Pixels: 12.76 Megapixels
Lens/Focal Distance
(Snapshot)
F2.8 f = 3.8 mm
(equivalent to 21 mm in 35 mm format)
Zoom Up to 4.0X when SR zoom and Digital zoom are used in
combination
Up to 15.9X when SR Zoom, HD Zoom and Digital zoom are
used in combination (VGA size)
Focusing Contrast Detection Auto Focus
• Focus Modes:
Auto Focus, Macro Focus, Pan Focus, Infinity
• AF Area: Spot
* Intelligent AF area used when Premium Auto Pro is selected.
Approximate Focus
Range (Snapshot)
(From Lens Surface)
Auto Focus: 8 cm to
9
(3.1" to
9
)
Macro Focus: 8 cm to 50 cm (3.1" to 19.7")
Infinity:
9
Metering Multi-pattern by imaging element
Exposure Control Program AE
122
Appendix
Exposure
Compensation
–2.0 EV to +2.0 EV (in 1/3EV steps)
Shutter CMOS electronic shutter
Shutter Speed Snapshot (Auto): 1/10 to 1/16000 second
Snapshot (Premium Auto Pro): 1 to 1/16000 second
* May differ due to the camera setup.
Aperture Value F2.8
White Balance Auto, Daylight, Overcast, Shade, Daywhite Fluorescent,
Daylight Fluorescent, Tungsten, Manual WB
Sensitivity
(Standard Output
Sensitivity)
Snapshots:
Auto, ISO 100, ISO 200, ISO 400, ISO 800, ISO 1600,
ISO 3200 equivalent
Movies: Auto
Monitor Screen 3.0-inch TFT color LCD (Super Clear LCD)
921,600 dots
Capacitive type touch panel
External connection
terminal
Micro USB port (Hi-Speed USB compliance, USB charging),
HDMI output (Micro/TypeD)
Microphones Monaural
Speaker Monaural
Power Requirements Rechargeable lithium ion battery (NP-150)
x
1
123
Appendix
Approximate Battery Life
All of the values provided below represent the approximate amount of time under
normal temperature (23°C (73°F)) before the camera turns off. These values are not
guaranteed. Low temperatures shorten battery life.
• Battery: NP-150 (Rated Capacity: 950 mAh)
• Recording Medium: 16GB SDHC memory card (SanDisk Corporation UHS-I
series)
*1 In accordance with CIPA (Camera and Imaging Products Association) standards
*2 In accordance with CASIO standards
*3 Standard temperature (23°C (73°F)), one-image scroll approximately every
10 seconds
• The above values are based on a full charge, the first time the battery is charged
after the camera is purchased. Repeated charging shortens battery life.
• Frequency of Auto Focus usage and the time the camera is on greatly affects
recording time and number of shots values.
Number of snapshots (Operating Time)*
1
260 shots
Actual movie recording time (Full HD movie)*
1
55 minutes
Approximate continuous movie recording time
(Full HD Movie)*
2
1 hour 30 minutes
Approximate continuous movie recording time
(High speed movie)*
2
1 hour 40 minutes
Continuous Playback (Snapshots)*
3
3 hours 20 minutes
Power Consumption 3.7 V DC, Approximately 3.5 W
Dimensions 128.9 (W)
x
61.6 (H)
x
14.9 (D) mm
(5.1" (W)
x
2.4" (H)
x
0.59" (D))
Weight Approximately 169 g (6.0 oz)
(including battery and memory card*)
Approximately 148 g (5.2 oz)
(excluding battery and memory card)
* 16GB microSDHC memory card (SanDisk Corporation)
124
Appendix
. Rechargeable lithium ion battery (NP-150)
. USB-AC adaptor (AD-C54UG)
. USB-AC adaptor (AD-C54UC)
Rated Voltage 3.7 V
Rated Capacitance 950 mAh
Operating Temperature
Requirements
0 to 40°C (32 to 104°F)
Dimensions 34.2 (W)
x
39.8 (H)
x
6.9 (D) mm
(1.35" (W)
x
1.57" (H)
x
0.27" (D)) (excluding projections)
Weight Approximately 20 g (0.7 oz)
Input Power 100 to 240 V AC, 50/60 Hz, 90 mA
Output Power 5.0 V DC, 650 mA
Operating Temperature
Requirements
5 to 35°C (41 to 95°F)
Dimensions 64.6 (W)
x
56.9 (H)
x
24 (D) mm
(2.5" (W)
x
2.2" (H)
x
0.9" (D)) (excluding projections)
Weight Approximately 45 g (1.6 oz)
Input Power 100 to 240 V AC, 50/60 Hz, 90 mA
Output Power 5.0 V DC, 650 mA
Operating Temperature
Requirements
5 to 35°C (41 to 95°F)
Dimensions 64.6 (W)
x
38.4 (H)
x
24 (D) mm
(2.5" (W)
x
1.5" (H)
x
0.9" (D)) (excluding projections)
Weight Approximately 40 g (1.4 oz)
125
Appendix
. USB-AC adaptor (AD-C53U)
• Power cord precautions for use in Singapore
The power cord set is not supplied. The power cord used must comply with
relevant national and/or international standards.
Input Power 100 to 240 V AC, 50/60 Hz, 100 mA
Output Power 5.0 V DC, 650 mA
Operating Temperature
Requirements
5 to 35°C (41 to 95°F)
Dimensions 53 (W)
x
21 (H)
x
45 (D) mm
(2.1" (W)
x
0.83" (H)
x
1.8" (D)) (excluding projections)
Weight Approximately 37 g (1.3 oz)
The declaration below applies to the EX-TR10.
Manufacturer:
CASIO COMPUTER CO., LTD.
6-2, Hon-machi 1-chome, Shibuya-ku, Tokyo 151-8543, Japan
Responsible within the European Union:
CASIO EUROPE GmbH
Casio-Platz 1, 22848 Norderstedt, Germany
Declaration of Conformity According to EU Directive
2013
CASIO COMPUTER CO., LTD.
6-2, Hon-machi 1-chome
Shibuya-ku, Tokyo 151-8543, Japan
MA1309-BM29
… 5 …

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Casio EX-TR300 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Casio EX-TR300 in de taal/talen: Engels als bijlage per email.

De handleiding is 3,46 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info