Handleiding Casio EX-M2 (pagina 5 van 54) (Engels)

40945

Verklein

Vergroot

Pagina terug

1/54

Pagina verder

FILE MANAGEMENT

The file management capabilities of the camera make it easy

to keep track of images. You can protect files against dele-

tion, and even use its DPOF feature to specify images for

printing.

Folders

Your camera automatically creates a directory of folders in

its built-in flash memory or on the memory card to store im-

ages.

Memory Folders and Files

An image you record is automatically stored in a folder,

whose name is a serial number. You can have up to 900

folders in memory at the same time. Folder names are gen-

erated as shown below.

Example: Name of the 100th folder.

Each folder can hold files numbered up to 9,999.

Trying to store the 10,000th file in a folder causes the next

serially numbered folder to be created. Folder names are

generated as shown below.

Example: Name of the 26th file

Extension

CIMG0026.JPG

Serial number (4 digits)

• The actual number of files you will be able to store on a

memory card depends on the image quality settings, ca-

pacity of the card, etc.

• For details about the directory structure, see “Memory Di-

rectory Structure” on page 94.

100CASIO

Serial number (3 digits)

FILE MANAGEMENT

Rock the controller

up or down to select

“On”, and then click.

• A file that is protected is

indicated by the

mark.

• To unprotect a file, se-

lect “Off” in step 4, and

then click.

Press MENU to exit the menu screen.

Protecting Files

Once you protect a file it cannot be deleted (page 62). You

can protect files individually or you can protect all files in

memory with a single operation.

To protect a single file

In the PLAY mode, press MENU.

Select the “PLAY”

tab, select “Protect”,

and then rock the

controller to the right.

Rock the controller left or right to scroll

through files and display the one you want to

protect.

FILE MANAGEMENT

To protect all files in memory

In the PLAY mode, press MENU.

Select the “PLAY” tab, select “Protect”, and

then rock the controller to the right.

Rock the controller up or down to select “All

Files : On”, and then click.

• To unprotect all files, click the controller in step 3 so

the setting shows “All Files : Off.”

Press MENU to exit the menu screen.

DPOF

The letters “DPOF” stand for “Digital Print Or-

der Format”, which is a format for recording on

a memory card or other medium which digital

camera images should be printed and how

many copies of the image should be printed.

Then you can print on a DPOF-compatible

printer or at a professional print service in ac-

cordance with the file name and number of

copies settings recorded on the card.

With this camera, you should always select images by view-

ing them on the monitor screen. Do not specify images by file

name without viewing the file contents.

■ DPOF Settings

File Name,

number of copies,

date

FILE MANAGEMENT

To configure print settings for a single

image

In the PLAY mode,

rock the controller up

(DPOF).

Rock the controller

up or down to select

“Select images”, and

then rock the control-

ler to the right.

Rock the controller left or right to scroll

through images and display the one you want

to print.

To insert the date during printing

NOTE

• To insert the date during printing, you need to use the

following procedure to turn on the date insertion fea-

ture before configuring other print settings.

In the PLAY mode, rock the controller up

(DPOF).

Rock the controller up or down to select

“Date”, and then rock the controller to the

right.

Rock the controller up or down to select “On”,

and then click.

• If you do not want the date inserted, select “Off”.

FILE MANAGEMENT

To configure print settings for all images

In the PLAY mode, rock the controller up

(DPOF).

Rock the controller up or down to select “All

images”, and then rock the controller to the

right.

Rock the controller up or down to specify the

number of copies.

• You can specify up to 99 for the number of copies.

Specify 00 if you do not want to have the image

printed.

Click the controller to complete the procedure.

Rock the controller up or down to specify the

number of copies.

• You can specify up to 99 for the number of copies.

Specify 00 if you do not want to have the image

printed.

• Repeat steps 3 through 4 to configure settings for

other images, if you want.

Click the controller to complete the procedure.

FILE MANAGEMENT

PRINT Image Matching II

Images include PRINT Image Matching

II data (mode setting and other camera

setup information). A printer that sup-

ports PRINT Image Matching II reads

this data and adjusts the printed image

accordingly, so your images come out

just the way you intended when you re-

corded them.

*SEIKO EPSON Corporation holds the copy-

right for PRINT Image Matching and PRINT

Image Matching II.

Exif Print

Exif Print is an internation-

ally supported, open stan-

dard file format that makes it

possible to capture and dis-

play vibrant digital images

with accurate colors. With

Exif 2.2, files include a wide

range of shooting condition

information that can be inter-

preted by an Exif Print

printer to produce better-

looking prints.

IMPORTANT!

• Information about the availability of Exif Print compat-

ible printer models can be obtained from each printer

manufacturer.

FILE MANAGEMENT

Rock the controller left or right to select the file

you want to copy to the FAVORITE folder.

Rock the controller up or down to select

“Save”, and then click.

• This copies the displayed file to the FAVORITE folder.

NOTES

• Copying an image file with the above procedure cre-

ates a 320 x 240-pixel QVGA-size image in the FA-

VORITE folder.

• A file copied into the FAVORITE folder is automati-

cally assigned a file name that is a serial number

(0001 to 9999).

Using the FAVORITE Folder

You can copy snapshots from a file storage folder (page 94)

to the FAVORITE folder in built-in memory (page 94). This

makes it easy to keep track of important files.

To copy a file to the FAVORITE folder

In the PLAY mode, press MENU.

Select the “PLAY”

tab, select “Favor-

ites”, and then rock

the controller to the

right.

Rock the controller

up or down to select

“Save”, and then

click.

• This displays the names

of the files in built-in

memory or on the

loaded memory card.

FILE MANAGEMENT

To display a file in the FAVORITE folder

In the PLAY mode, press MENU.

Select the “PLAY” tab, select “Favorites”, and

then rock the controller to the right.

Rock the controller up or down to select

“Show”, and then click.

• If the FAVORITE folder is empty, the message “No

Favorites file!” appears.

Rock the controller

right (forward) or left

(back) to scroll

through the files in

the FAVORITE folder.

NOTE

• Holding the controller to the left or right scrolls at high

speed.

File Name

To delete a file from the FAVORITE folder

In the PLAY mode, press MENU.

Select the “PLAY” tab, select “Favorites”, and

then rock the controller to the right.

Rock the controller up or down to select

“Delete”, and then click.

Rock the controller left or right to select the file

you want to delete from the FAVORITE folder.

Rock the controller up or down to select

“Delete”, and then click.

• This deletes the file from the FAVORITE folder

IMPORTANT!

• You cannot use the delete operations on page 62 to

delete images from the FAVORITE folder. Performing

the memory format operation (page 75), however,

does delete FAVORITE folder files.

OTHER SETTINGS

Turning the Key Tone On and Off

Use the following procedure to turn the tone that sounds

when you press a key on and off.

In the REC mode or PLAY mode, press MENU.

Select the “Set Up” tab, select “Beep”, and

then rock the controller to the right.

Rock the controller up or down to select the

setting you want, and then click.

Specifying an Image for the Startup Screen

You can specify an image you recorded with the camera as

the startup screen image, which causes it to appear on the

monitor screen for about two seconds whenever you turn on

the camera.

Enter the REC mode or the PLAY mode.

Press MENU.

Select the “Set Up” tab, select “Startup”, and

then rock the controller to the right.

Rock the controller left or right to display the

image you want to use as the startup image.

Rock the controller up or down to select the

setting you want, and then click.

Select this:

Off

To do this:

Turn on the key tone

Turn off the key tone

Select this:

Off

To do this:

Use the currently displayed image as

the startup screen image

Disable the startup screen

OTHER SETTINGS

Changing the Date and Time Setting

Use the following procedure to change the date and time

setting.

In the REC mode or PLAY mode, press MENU.

Select the “Set Up” tab, select “Adjust”, and

then rock the controller to the right.

Set the date and the time.

Do this:

Rock the controller up or

down.

Rock the controller left or

right.

To do this:

Change the setting at the

current cursor location

Move the cursor between

settings

Click to register the settings and exit the set-

ting screen.

IMPORTANT!

•You can select any one of the following types of image

as the startup image.

—The camera’s built-in startup image

—A snapshot you recorded with the camera

—A movie you recorded with the camera two sec-

onds or less in length and 200KB or less in size

•The snapshot image or movie that you select as the

startup image is stored in a special memory location

called “startup image memory.” Only one image can

be stored in startup image memory. Selecting a new

startup image overwrites anything that is already

stored in startup image memory. Except for the

camera’s built-in startup image, if you want to return to

a previous startup image, you need to have a separate

copy of that image in the camera’s standard image

storage memory.

OTHER SETTINGS

Changing the Display Language

You can use the following procedure to select one of six lan-

guages as the display language.

In the REC mode or PLAY mode, press MENU.

Select the “Set Up” tab, select “Language”,

and then rock the controller to the right.

Rock the controller up or down to select the

option you want, and then click.

:Japanese

English :English

Français :French

Deutsch :German

Español :Spanish

Italiano :Italian

Changing the Date Format

You can select from among three different formats for dis-

play of the date.

In the REC mode or PLAY mode, press MENU.

Select the “Set Up” tab, select “Date Style”,

and then rock the controller to the right.

Rock the controller up or down to select the

setting you want, and then click.

Example: October 23, 2002

Select this format:

YY/MM/DD

DD/MM/YY

MM/DD/YY

To display the date like this:

02/10/23

23/10/02

10/23/02

OTHER SETTINGS

Formatting Built-in Memory

Formatting built-in memory deletes any data stored in it.

IMPORTANT!

•Note that data deleted by a format operation cannot

be recovered. Check to make sure you do not need

any of the data in memory before you format it.

•Formatting memory deletes all files in memory, even

files that are protected (page 65).

Check to make sure there is no memory card

loaded in the camera.

•If there is a memory card loaded in the camera, re-

move it (page 77).

In the REC mode or PLAY mode, press MENU.

Select the “Set Up” tab, select “Format”, and

then rock the controller to the right.

Rock the controller up or down to select

“Format”, and then click.

•To exit the format operation without formatting, select

“Cancel”.

USING A MEMORY CARD

You can expand the storage capabilities of your camera by

using a commercially available memory card (SD memory

card or MultiMedia Card). You can also copy files from built-

in flash memory to a memory card and from a memory card

to flash memory.

•Normally, files are stored in built-in flash memory. When

you insert a memory card, however, the camera automati-

cally stores files to the card.

•Note that you cannot save files to built-in memory while a

memory card is installed in the camera.

IMPORTANT!

•Make sure you turn off the camera before inserting or

removing a memory card.

•Be sure to orient the card correctly when inserting it.

Never try to force a memory card into the slot when

you feel resistance.

•See the instructions that come with the memory card

for information about how to use it.

•Certain types of cards can slow down processing

speeds.

•SD memory cards have a write protect switch, which

you can use to protect against accidental deletion of

image data. Note, however, if you write protect an SD

memory card, you must remove write protection

whenever you want to record to it, format it, or delete

any of its files.

USING A MEMORY CARD

Using a Memory Card

To insert a memory card into the camera

Making sure that the

contacts of the memory

card are facing towards

the top of the camera,

carefully insert the card

into the slot as far as it

will go.

To remove a memory card from the camera

Press the memory card

into the camera and then

release it. This will cause

the card to come part way

out of the camera.

Pull the memory card out

of the slot.

IMPORTANT!

•Never insert any other object besides a memory card

into the camera’s card slot. Doing so creates the risk

of damage to the camera and card.

•If you are not using a memory card, be sure to insert

the dummy card into this slot to protect against dust

and damage.

•The dummy card is intended for use with this camera

only. Never insert it into the card slot of any other type

of device.

•Should water or any foreign object ever get into the

card slot, immediately turn off the camera, remove the

battery, and contact your dealer or nearest CASIO

authorized service center.

•Never remove a card from the camera while the op-

eration/flash charge lamp is flashing. Doing so can

cause the files save operation to fail, and even dam-

age the memory card.

Contacts

USING A MEMORY CARD

Formatting a Memory Card

Formatting a memory card deletes any data already stored

on it.

IMPORTANT!

•Be sure to use the camera to format a memory card.

Formatting a memory card on a computer and then

using it in the camera can slow down data processing

by the camera. In the case of an SD card, formatting

on a computer can result in non-conformity with the

SD format, causing problems with compatibility, op-

eration, etc.

•Note that data deleted by a memory card format op-

eration cannot be recovered. Check to make sure you

do not need any of the data on the memory card be-

fore you format it.

•Formatting a memory card that contains files deletes

all the files, even those that are protected (page 65).

Load the memory card into the camera.

Turn on the camera. Next, enter the REC mode

or PLAY mode and press MENU.

Select the “Set Up” tab, select “Format”, and

then rock the controller to the right.

Rock the controller up or down to select

“Format”, and then click.

•To exit the format operation without formatting, select

“Cancel”.

USING A MEMORY CARD

Copying Files

Use the procedures below to copy files between built-in

memory and a memory card.

To copy all the files in built-in memory to

a memory card

Load the memory card into the camera.

Turn on the camera. Next, enter the PLAY

mode and press MENU.

Select the “PLAY”

tab, select “Copy”,

and then rock the

controller to the right.

Memory Card Precautions

•Use only an SD memory card or a MultiMediaCard with this

camera. Proper operation is not guaranteed when any

other type of card is used.

•Electrostatic charge, electrical noise, and other phenom-

ena can cause data to become corrupted or even lost. Al-

ways make sure that you always back up important data on

other media (MO disc, computer hard disk, etc.)

•If a memory card starts to behave abnormally, you can re-

store normal operation by reformatting it. However, we rec-

ommend that you always take along more than one

memory card whenever using the camera far away from

the home or office.

•We recommend that you format a memory card before us-

ing it for the first time after purchasing it, or whenever the

card you are using seems to be the cause of abnormal im-

ages.

•Before starting a format operation, check to make sure that

the battery is fully charged. Power interruption during the

format operation can result in improper formatting, and

even damage the memory card and make it unusable.

USING A MEMORY CARD

To copy a file from a memory card to

built-in memory

Perform steps 1 through 3 of the procedure un-

der “To copy all the files in built-in memory to a

memory card.”

Rock the controller up or down to select “Card

Built-in”, and then click.

Rock the controller left or right to select the file

you want to copy.

Rock the controller up or down to select

“Copy”, and then click.

•This starts the copy operation and displays the mes-

sage “Busy... Please wait...”

•The file reappears on the monitor screen after the

copy operation is complete.

Rock the controller up or down to select “Built-

in Card”, and then click.

•This starts the copy operation and displays the mes-

sage “Busy... Please wait...”

•After the copy operation is complete, the monitor

screen shows the last file in the folder.

USING THE CAMERA WITH A COMPUTER

The USB cradle that comes with your camera makes it easy

to connect to a computer that is equipped with a USB port.

You can also transfer files using the memory card, if your

computer is equipped to read memory cards.

Computer

Page 89

USB

USB cable (bundled) USB port

Installing the Software from the CD-ROM

Before you can exchange files with your computer, you first

need to install the software contained on the CD-ROM that

comes with the camera.

About the bundled CD-ROM

The CD-ROM that comes bundled with the camera contains

the following software.

Photo Loader (for Windows/Macintosh)

This application loads image data saved in JPEG and AVI

format from a digital camera onto your computer.

Photohands (for Windows)

This application is for retouching and printing image files.

USB Driver for Mass Storage (for Windows/Macintosh)

This is the software that makes it possible for the camera to

“talk” to your personal computer over a USB connection.

If you are using Windows XP, Mac OS 9, or Mac OS X, do

not install the USB driver from the CD-ROM. With these op-

erating systems, you will be able to perform USB communi-

cation simply by connecting the camera to your computer

with the USB cable.

USING THE CAMERA WITH A COMPUTER

Internet Explorer (for Macintosh)

This is a browser application for reading HTML files. Images

loaded by Photo Loader are stored in folders called “Librar-

ies.” Internet Explorer displays the contents of a library on

your computer screen.

DirectX (for Windows)

This software provides an extended tool set including a

codec that allows Windows 98 and 2000 to handle movie

files recorded using a digital camera. You do not need to

install DirectX if you are running Windows XP or Me.

Acrobat Reader (for Windows/Macintosh)

This is an application that lets you read PDF files. Use it to

read the user documentation for the camera, Photo Loader,

and Photohands, all of which is included on the bundled CD-

ROM.

NOTE

• See the user documentation files (PDF) on the

bundled CD-ROM for details about using Photo

Loader and Photohands. See “Viewing User Docu-

mentation (PDF files)” on page 85 (Windows) and

page 88 (Macintosh) of this manual for more informa-

tion.

Computer System Requirements

Computer system requirements depend on each of the appli-

cations, as described below.

Windows

See the “Readme” file on the bundled CD-ROM.

Macintosh

See the “readme” file on the bundled CD-ROM.

USING THE CAMERA WITH A COMPUTER

Installing Software from the CD-ROM in

Windows

Use the procedures in this section to install the software

from the bundled CD-ROM to your computer.

NOTE

• You do not need to install software if you already have

it installed on your computer.

The CD-ROM includes the software and user documentation

for various languages. Check the CD-ROM menu screen to

see if applications and user documentation are available for

a particular language.

Getting Started

Start up your computer and

insert the CD-ROM into its

CD-ROM drive. This will

automatically launch the menu

application, which displays a

menu screen on your

computer.

NOTE

• The menu application may not start up automatically

on some computers. If this happens, navigate to the

CD-ROM and double-click “menu.exe” to launch the

menu application.

Selecting a Language

First select a language. Note that some software is not avail-

able in all languages.

On the menu screen, click the language button

in the upper left corner of the display.

On the list of languages that appears, select

the one you want.

USING THE CAMERA WITH A COMPUTER

Viewing the Contents of the “Read me” File

You should always read the “Read me” file for any applica-

tion before installing it. The “Read me” file contains informa-

tion you need to know when installing the application.

On the menu screen, click “Software.”

Click the name of the application you want to

install.

Click the “Read me” button.

IMPORTANT!

• Before upgrading or reinstalling Photo Loader, or be-

fore installing it onto another computer, be sure to

read the “Read me” file for information about retaining

existing libraries.

Installing an Application

On the menu screen, click “Software.”

Click the name of the application you want to

install.

Click the “Install” button.

Follow the instructions that appear on your

computer screen.

IMPORTANT!

• Be sure to follow the instructions carefully and com-

pletely. If you make a mistake when installing Photo

Loader, you may not be able to browse your existing

library information and HTML files that are created

automatically by Photo Loader. In some cases, image

files may be lost.

• When using an operating system other than Windows

XP, never connect the camera to your computer with-

out installing the USB driver from the CD-ROM first.

USING THE CAMERA WITH A COMPUTER

Viewing User Documentation (PDF Files)

On the menu screen, click “Manual.”

Click the name of the application whose user

documentation you want to read.

Click the “Read” button.

IMPORTANT!

• You need to have Adobe Acrobat Reader installed on

your computer to read user documentation files. If you

do not already have Adobe Acrobat Reader installed,

you can install it from the bundled CD-ROM.

Exiting the Menu Application

On the menu screen, click “Exit” to exit the

menu.

Installing Software from the CD-ROM on a

Macintosh

The CD-ROM contains applications and user documentation

in various languages in folders named for each language:

English, French, German, Spanish, Italian, Dutch, and Chi-

nese. Check the CD-ROM folders to find out if applications

and user documentation are available in a particular lan-

guage.

File names include one of the following codes that indicate

the language of the data contained in the file as shown be-

low.

English: e, French: f, German: g, Spanish: sp, Italian: i,

Dutch: du, Chinese: ct

If your language is not included in the above, use the con-

tents of the “English” folder.

Installing Software

Use the following procedures to install the software. We rec-

ommend that you install Internet Explorer and Outlook Ex-

press first before installing Photo Loader and Acrobat

Reader.

USING THE CAMERA WITH A COMPUTER

■To install Internet Explorer and Outlook

Express

Open the file named “Internet Explorer.”

Open the folder for the language version you

want to install, and then open the file named

“readme_casio” file.

Follow the instructions in the read me file to

install Internet Explorer and Outlook Express.

■To install Photo Loader

Open the folder named “Photo Loader.”

Open the folder named “English,” and then

open the file named “Important.”

Open the folder named “Installer,” and then

open the file named “readme.”

Follow the instructions in the “readme” file to

install Photo Loader.

IMPORTANT!

• If you are upgrading to the new version of Photo

Loader from a previous version and you want to use

library management data and HTML files created us-

ing the old version of Photo Loader, be sure to read

the “Important” file in the “Photo Loader” folder. Follow

the instructions in the file to use your existing library

management files. Failure to follow this procedure

correctly can result in loss or corruption of your exist-

ing files.

■To install Acrobat Reader

On the bundled CD-ROM, open the folder

named “Acrobat Reader.”

Open the folder for the language whose ver-

sion of Acrobat Reader you want to install, and

then open the file named “readme_casio.”

• Follow the instructions in the read me file to install Ac-

robat Reader.

USING THE CAMERA WITH A COMPUTER

■ Installing the USB Driver

Turn off the camera and quit all applications on

your Macintosh.

Insert the bundled CD-ROM provided into the

CD-ROM drive.

Open the hard disk that is specified as the

startup disk.

Open the “System Folder” on the startup disk.

Open the “Extensions” folder inside the “Sys-

tem Folder.”

Open the “USB Driver” folder on the CD-ROM.

Drag “CASIO-USB Storage Driver” and

“CASIO-USB Storage Class Shim” from the

“USB Driver” folder to the “Extensions” folder.

Confirm that the “CASIO-USB Storage Driver”

file and “CASIO-USB Storage Class Shim” file

are in the “Extensions” folder, and then restart

your Macintosh.

After the system starts up, use the USB cable

to connect the camera to your Macintosh.

10.

Turn on the camera.

11.

From now on, the

camera will be

recognized as a drive

whenever you con-

nect the camera to

your Macintosh.

• The shape of the icon

that appears on your

Macintosh display

depends on the version

of your Mac OS.

IMPORTANT!

• If you are running an operating system other than Mac

OS 9 or Mac OS X, do not connect the camera to your

Macintosh PC without installing the USB driver first.

●To uninstall the USB driver

Delete “CASIO-USB Storage Driver” and “CASIO-USB

Storage Class Shim” from the “Extensions” folder.

USING THE CAMERA WITH A COMPUTER

Viewing User Documentation (PDF Files)

To perform the following procedures, you must have Acrobat

Reader installed on your Macintosh (page 86).

On the bundled CD-ROM, open the folder

named “Acrobat Reader.”

Open the folder for the language whose ver-

sion of Acrobat Reader you want to install, and

then open the file named “readme_casio.”

Follow the instructions in the read me file to

install Acrobat Reader.

■ To view the camera user’s guide

On the CD-ROM, open the “Manual” folder.

Open the “Digital Camera” folder, and then

open the folder for the language whose user’s

guide you want to view.

Open the file named “camera_xx.pdf.”

“xx” is the language code (English: e, French: f,

German: g, Spanish: sp, Italian: i, Dutch: du,

Chinese: ct).

■ To read the Photo Loader user’s guide

On the CD-ROM, open the “Manual” folder.

Open the “Photo Loader” folder and then open

the “English” folder.

Open “PhotoLoader_english.”

USING THE CAMERA WITH A COMPUTER

Transferring Files to a Computer

The CD-ROM that comes bundled with your camera con-

tains a copy of Photo Loader and a USB driver. This soft-

ware lets you transfer the contents of the camera’s memory

to your computer quickly and easily. Photo Loader and the

Photohands application can also be used for high-level im-

age management and editing.

• For information about using Photo Loader and

Photohands, see their user documentation files (PDF) on

the bundled CD-ROM.

Transferring Files Over a USB Connec-

tion

Connecting the bundled USB cradle to a computer that is

equipped with a USB port makes it possible to transfer files

to a computer simply by placing the camera onto the cradle.

• Note that you need to install a USB driver on your computer

(page 81). Once you use the cradle to establish a USB con-

nection, the computer sees the camera as an external stor-

age device (card reader/writer).

• If you plan to transfer files from the camera’s built-in

memory to your computer, make sure there is no memory

card loaded in the camera. If there is, remove the memory

card from the camera before you place it onto the cradle.

NOTE

• Do not install USB driver from the CD-ROM onto a

computer running Windows XP, or Mac OS 9 or Mac

OS X. With these operating systems, USB communi-

cation becomes enabled simply by connecting the

camera to the computer with the USB cable.

USING THE CAMERA WITH A COMPUTER

Shut down your computer, and plug Connector

A of the cable into its USB port. Next, start up

your computer.

USB port

Connector A

USB cable

(bundled)

Plug Connector B on the bundled USB cable to

the USB port of the USB cradle.

■ To connect the USB Cable

Connect the AC power cord to the AC adaptor,

and then plug the other end of the AC power

cord into a household power outlet.

Connect the AC adaptor to the DC IN 5.3V con-

nector of the USB cradle.

USB

Connector BUSB cable

(bundled)

USING THE CAMERA WITH A COMPUTER

Turn off the camera

and remove its

connector cover.

Making sure that the

camera is turned off,

set it onto the USB

cradle.

• Do not place the

camera onto the USB

cradle while it is turned

on.

Turn on the camera.

• When you turn on the camera, it enters the USB Mode

and automatically transfers the files in camera

memory to the computer.

• While the camera is in the USB Mode, the USB lamp

on the cradle lights green (page 109).

IMPORTANT!

• Be sure to read the applicable information in the user

documentation that comes with your computer before

connecting the USB cradle.

• Do not leave the same image displayed on your com-

puter screen for a long time. Doing so can cause the

image to “burn in” on the screen.

• Take care when connecting the USB cable to the USB

cradle. The USB port and the cable plug are shaped

for proper positioning.

• Plug the USB cable into the ports securely as far as it

will go. Proper operation is not possible if connections

are not correct.

• Be sure to connect the AC adaptor to the USB cradle

to supply power to the camera.

• The optionally available CASIO QC-1U USB cable

cannot be used with this camera.

• Never disconnect the USB cable while the PC is ac-

cessing camera memory (indicated by a flashing USB

lamp). Doing so can cause data to become corrupted.

• You can perform data communication in either the

REC mode or PLAY mode.

Connector

cover

USING THE CAMERA WITH A COMPUTER

■ Terminating a USB Connection

Windows XP, Me or 98

Turn off the camera, and then remove the camera from the

USB cradle.

Windows 2000

Click card services in the task tray on your computer screen,

and disable the drive number assigned to the camera. Next,

turn off the camera, and then remove the camera from the

USB cradle.

Macintosh

In Finder, drag the camera to the Trash. Next, turn off the

camera, and then remove the camera from the USB cradle.

Using a Memory Card to Transfer Images

to a Computer

The procedures in this section describe how to transfer im-

ages from the camera to your computer using a memory

card.

Using a Computer with a Built-in SD Memory Card Slot

Insert the SD memory card directly into the slot.

Using a Computer with a Built-in PC Card Slot

Use a commercially available PC card adapter (for an SD

memory card/MMC). For full details, see the user documen-

tation that comes with the PC card adapter and your com-

puter.

USING THE CAMERA WITH A COMPUTER

Using a Commercially Available SD Memory Card

Reader/Writer

See the user documentation that comes with the SD memory

card reader/writer for details about how to use it.

Using a Commercially Available PC Card Reader/Writer

and PC Card Adapter (for SD Memory Cards and MMCs)

See the user documentation that comes with the PC card

reader/writer and PC card adapter (for an SD memory card/

MMC) for details about how to use them.

Memory Data

Images recorded with this camera and other data are stored

in memory using DCF (Design Rule for Camera File System)

protocol. DCF protocol is designed to make it easier to ex-

change image and other data between digital cameras and

other devices.

■ DCF Protocol

DCF devices (digital cameras, printers, etc.) can exchange

images with each other. DCF protocol defines camera format

for image file data and the directory structure for camera

memory, so images can be viewed using another

manufacturer’s DCF camera or printed on a DCF printer.

USING THE CAMERA WITH A COMPUTER

. . . . . . . . .

■ Folder and File Contents

• Parent folder

Folder that stores all of the digital camera files.

• Storage folder

Folders for storing files stored with the digital camera.

• Image file

File that contains an image recorded with the digital cam-

era.

• Movie file

File that contains a movie recorded with the digital camera.

• Audio file

File that contains an audio recording.

• Audio snapshot image file

File that contains the image part of an audio snapshot.

• Audio snapshot audio file

File that contains the audio part of an audio snapshot.

• FAVORITE folder

Folder that contains Favorites image files.

• DPOF file folder

Folder that contains DPOF files.

• MP3 files folder

Folder that contains MP3 files.

• LASTPLAY file

File that contains information about the last played MP3 file.

Memory Directory Structure

■ Directory Structure

<¥DCIM¥> (Parent Folder)

100CASIO (Storage folder)

CIMG0001.JPG (Image file)

CIMG0002.AVI (Movie file)

CIMG0003.WAV (Audio file)*1

CIMG0004.JPG (Audio snapshot image file)*1

CIMG0004.WAV (Audio snapshot audio file)*1

101CASIO (Storage folder)

102CASIO (Storage folder)

<¥FAVORITE¥> (FAVORITE folder)*2

CIMG0001.JPG (Storage file)

CIMG0002.JPG (Storage file)

<¥MISC¥> (DPOF file folder)

AUTPRINT.MRK (DPOF file)

<¥AUDIO¥> (MP3 file folder)*1

쏄쏄쏄쏄쏄쏄쏄쏄.MP3 (MP3 file)*1

LASTPLAY (LASTPLAY file)*1

*1 These folders and files are for the EX-M2 only.

*2 These folders are created in built-in memory only.

USING THE CAMERA WITH A COMPUTER

Image Files Supported by the Camera

• Image files recorded with the CASIO EX-S2/EX-M2 Digital

Camera

• DCF protocol image files

Certain DCF functions may not be supported. When display-

ing an image recorded on another camera model, it may take

a long time for the image to appear on the display.

Built-in Memory and Memory Card

Precautions

• Note that the folder named “DCIM” is the parent (top) folder

of all the files in memory. When transferring memory con-

tents to a hard disk, MO disk, or other external storage,

treat all the contents inside a DCIM folder as a set and al-

ways keep them together. You can change the name of the

DCIM folder on your computer. Changing the name to a

date is a good way to keep track of multiple DCIM folders.

However, be sure you change the name of the DCIM folder

back to “DCIM” before you copy it back to memory for play-

back on the camera. The camera does not recognize any

folder name other than DCIM.

• We also strongly recommend that after transferring data

from memory to other external storage that you reformat

memory and delete its contents before using it to store

more files. Remember that formatting memory deletes all

of its contents. Check to make sure that you no longer need

any of the files in memory before you format it.

PLAYING AN AUDIO FILE (EX-M2 Only)

You can transfer MP3 music data files from your computer to

the camera and then use the camera as a portable audio

player.

• MP3 stands for MPEG Audio Layer-3, which is the name of

audio compression technology.

• Supported Files

MPEG-1 Audio Layer-3

Bit Rate: 32 to 320 kbps, VBR-compatible

Sampling Frequencies: 32, 44.1, 48kHz

• Maximum Number of Playback Files: 999

IMPORTANT!

• Depending on the MP3 file format, some music data

may not be playable.

• A bit rate of 128kbps and a sampling frequency of

44.1kHz are recommended for MP3 files.

• It is up to you to obtain software for creating MP3 files

and to create the MP3 files you want to play.

Transferring Audio Files to the Camera

Establish a connection between the camera

and your computer (page 89).

Transfer the MP3 files from your computer to

the camera’s AUDIO file.

• If you cannot find a folder named AUDIO in camera

memory, create one at the location indicated under

“Memory Directory Structure” on page 94.

PLAYING AN AUDIO FILE (EX-M2 Only)

Align the mode selector with “AUDIO”.

• This enters the AUDIO mode for playback audio data.

• Press the [ ] button on the LCD remote controller

to turn on the camera and start playback.

Preparing the Camera for Audio Player

Operation

Perform the following steps to prepare the camera for opera-

tion as an audio player.

Turn off the camera and remove its connector

cover.

Connector cover

Connect the LCD remote controller to the

camera’s connector, and then plug the stereo

headphones into the Headphones jack of the

LCD remote controller.

LCD Remote Controller

Stereo Headphones

Headphones jack

Connector

Mode selector

PLAYING AN AUDIO FILE (EX-M2 Only)

Using the Camera as an Audio Player

General Guide

●LCD Remote Controller

1234

1[] (Skip Back/Fast

Reverse)

2[] (Skip Forward/Fast

Forward)

3[ ] (Pause)

4[] (Play/Stop)

5Headphones jack (ø3.5mm

stereo mini jack)

6Clip

7Lock switch

8Playback mode button

9Volume buttons

0LCD

ACamera connector

IMPORTANT!

• All remote controller buttons are disabled when the

camera’s mode selector is set to “REC” or “PLAY”.

• The camera’s monitor screen is off while the camera is

in the AUDIO mode. Except for the power button, all

other camera buttons are disabled.

• Never try to connect any other type of remote control-

ler besides the one that comes with the camera. Also,

never try to use the supplied remote controller with

any other type of device.

• You cannot play MP3 file data through the camera’s

built-in speaker.

PLAYING AN AUDIO FILE (EX-M2 Only)

4Playback mode indicator

This icon indicates the playback mode.

5Battery level indicator

This type of icon:

Off

Indicates this:

Normal playback

All track repeat

1-track repeat

●Display

1 2 3 45

1Track number

Shows the track number of the current track.

2Track name, artist name, playback time, volume level

• Shows the ID3 tag (ID3V1), which is the track name and

artist name (alphabetic characters only), contained in the

file.

• During fast forward and fast reverse, shows the elapsed

play time.

• During volume level adjustment, shows the current vol-

ume level.

3Playback status indicator

This icon indicates the current playback status.

This type of icon:

Rotation clockwise while flashing

Flashing

Steady and unmoving

Indicates this:

Playback is in progress.

Playback is paused.

Playback is stopped.

PLAYING AN AUDIO FILE (EX-M2 Only)

100

●To skip to the beginning of the next track

Press the [ ] button (remote controller beeps).

To keep skipping forward, press the [ ] button multiple

times (remote controller beeps). The current track number

is shown on the LCD.

●To stop playback

Press the [ ] button (remote controller beeps).

●To adjust volume

Press the [+] or [–] volume buttons to adjust volume to the

desired level. The LCD shows the current volume level.

●To turn off power

Press the camera’s power button.

• Camera power also turns off automatically if you do not

perform an operation for about 10 seconds after play-

back is stopped.

IMPORTANT!

• The button operation tone does not sound if the

camera’s button tone function is turned off (page 72).

• You cannot use fast forward, fast reverse, or skip

while the current volume level is shown on the LCD.

Basic Remote Controller Operations

●To start playback

Press the [ ] button. The remote controller beeps to

indicate that playback has started.

• Pressing the [ ] button while the camera is off turns

on power and starts playback.

●To pause playback

Press the [ ] button (remote controller beeps).

Pressing the [ ] button resumes playback (remote

controller beeps).

• If you leave playback paused for about two minutes, the

camera and remote controller turn off automatically.

●To fast forward the playback

Hold down the [ ] button for a few seconds until fast

forward starts.

●To fast reverse the playback

Hold down the [ ] button for a few seconds until fast

reverse starts.

●To skip to the beginning of the current track

Press the [ ] button (remote controller beeps).

To skip to the beginning of a previous track, press the

[] button multiple times (remote controller beeps). The

current track number is shown on the LCD.

101

PLAYING AN AUDIO FILE (EX-M2 Only)

Selecting a Specify Track for Playback

You can use the following procedure to display a list of avail-

able tracks and select one of them for playback.

While AUDIO mode

playback is stopped

or paused, click the

camera’s controller.

• This turns on the

monitor screen, which

shows a list of informa-

tion about each track,

including track number,

track name, and play

time.

Rock the controller up or down to move the

highlighting to the track you want to select.

• If move the highlighting to the top or the bottom of the

list, the list will scroll to show other tracks.

Currently selected track

Specifying the Audio Playback Mode

You can use the following procedure to select one of three

playback modes: normal playback, all-track repeat, or 1-

track repeat.

In the AUDIO mode, start audio playback.

• The initial default mode is normal playback.

Press the remote controller’s playback mode

button to cycle through the playback modes.

The playback mode indicator on the LCD indi-

cates the currently selected mode.

To do this:

Play all tracks in order

and then stop

Play all tracks in order

in an endless loop

Play the current track

in an endless loop

Select this

mode:

Normal

All-track repeat

1-track repeat

Which is

indicated by

this icon:

Off

PLAYING AN AUDIO FILE (EX-M2 Only)

102

Specifying the Track Playback Sequence

Normally, all tracks in memory are played back in the order

they are saved. You can use the following procedure to cre-

ate a play list that tells the camera the sequence to use when

playing back AUDIO mode tracks.

On your computer, use your word processor or

another text editor to create a file named

“PLAYLIST.TXT”.

Configure the play list by specifying the tracks

you want to play in the sequence you want to

play them.

• See “Example PLAYLIST.TXT File Contents” on page

103 for information about how to configure a play list.

Place the camera onto the USB cradle and es-

tablish a link with your computer (page 90).

Place the “PLAYLIST.TXT” file into the “AUDIO”

folder of the camera.

Press the remote controller’s [ ] button to

start playback from the currently selected

track.

NOTE

• The monitor screen turns off automatically if you do

not perform any operation for about 10 seconds.

103

PLAYING AN AUDIO FILE (EX-M2 Only)

The above PLAYLIST.TXT file specifies the following play-

back sequence.

1. Playback the MP3 file named AUDIO001.MP3.

2. Playback the MP3 file named AUDIO002.MP3.

3. Playback all the files in the folder named POPS.

4. Playback the MP3 file named ROCK0002.MP3, which is

located in folder named ROCK.

AUDIO001.MP3

AUDIO002.MP3

POPS

ROCK\ROCK0002.MP3

■ Example PLAYLIST.TXT File Contents■ Example Folder Structure

<¥AUDIO¥> (Folder containing MP3 files)

AUDIO001.MP3 (MP3 file)

AUDIO002.MP3 (MP3 file)

PLAYLIST.TXT (PLAYLIST file)

POPS (Folder containing MP3 files)

POPS0001.MP3 (MP3 file)

POPS0002.MP3 (MP3 file)

ROCK (Folder containing MP3 files)

ROCK0001.MP3 (MP3 file)

ROCK0002.MP3 (MP3 file)

. . . . . .

. . .

PLAYING AN AUDIO FILE (EX-M2 Only)

104

Lock switch

Disabling Remote Controller Button

Operations

The remote controller has a lock switch that you can use to

disable button operations to guard against accidental opera-

tion. To disable all remote controller button operations, slide

the lock switch in the direction indicated by the 왘 mark.

• To re-enable remote controller button operations, slide the

lock switch back in the other direction.

NOTE

• The camera’s power button continues to be opera-

tional, even while remote controller button operations

are disabled.

NOTES

• If there is no PLAYLIST.TXT file in the camera’s AU-

DIO folder, all tracks are played back in the order they

are saved in memory.

• Playback of any tracks that are not included in the

PLAYLIST.TXT file is skipped.

• To change to a different playback sequence, replace

PLAYLIST.TXT with another PLAYLIST.TXT file.

• When there is a PLAYLIST.TXT file in the AUDIO

folder, only the tracks in the file appear on the

camera’s monitor screen.

105

PLAYING AN AUDIO FILE (EX-M2 Only)

Audio Playback Precautions

• Listening to audio at a high volume for long periods can

damage your hearing. Particular care is required when first

starting a playback operation.

• Never use the headphones, try to perform fine adjustment,

or look at the monitor screen while driving a car, riding a

motorcycle, or operating any other type of motor vehicle.

Doing so creates the risk of traffic accident. When walking,

take special care to remain aware of traffic and road condi-

tions around you.

LCD Remote Control Error Messages

The following describes the error messages that appear on

the LCD remote controller’s display.

NoData

Cause

Playback attempted

when there is no MP3

data in memory.

Action

Transfer MP3 file data

to the “AUDIO” folder of

built-in memory or the

memory card.

APPENDIX

106

EX-S2

(Snapshot) / (Best Shot) /

(Movie)

EX-M2

(Snapshot) / (Best Shot) /

(Movie) / (Snapshot Audio) /

(Voice Recording)

Auto / (Flash Off) / (Flash On) /

(Red-eye reduction)

10 sec / Off

LCD-ON / LCD-OFF

1600 x 1200 / 1280 x 960 / 640 x 480

Fine / Normal / Economy

On / Off

–2.0 / –1.7 / –1.3 / –1.0 / –0.7 / –0.3 / 0.0 /

+0.3 / +0.7 / +1.0 / +1.3 / +1.7 / +2.0

APPENDIX

Menu Reference

The following shows lists of menus that appear in the REC

mode and PLAY mode, and their settings.

•The settings that are underlined in the following table are

initial defaults.

■ REC Mode

●REC tab menu

REC Mode

Flash

Self-timer

Indicators

Size

Quality

Digital Zoom

Review

EV Shift

●Memory tab menu

Beep

Startup

Date Style

Adjust

Language

Format

On / Off

YY/MM/DD / DD/MM/YY / MM/DD/YY

Time setting

/ English / Français / Deutsch /

Español / Italiano

Format / Cancel

●Set Up tab menu

REC Mode

Flash

Digital Zoom

White Balance

On / Off

White Balance

L/R Key

Auto / (Sunlight) / (Shade) /

(Light Bulb) / (Fluorescent) / Manual

REC Mode / EV shift / Flash / White Balance

/ Off

APPENDIX

107

■ PLAY Mode

●PLAY tab menu

Zoom

Protect

Dubbing

Resize

Copy

Favorites

On/Off / All Files : On/Off / Cancel

*EX-M2 only

640 x 480 / 320 x 240 / Cancel

Built-in Card / Card Built-in / Cancel

Show / Save / Delete / Cancel

●Set Up tab menu

Beep

Startup

Date Style

Adjust

Language

Format

On / Off

YY/MM/DD / DD/MM/YY / MM/DD/YY

Time setting

/ English / Français / Deutsch /

Español / Italiano

Format / Cancel

Indicator Lamp Reference

Camera Indicator Lamps

The camera has two indicator lamps: an operation/flash

charge lamp and a self-timer lamp. These lamps light and

flash to indicate the current operational status of the camera.

*There are two lamp flash patterns.

Pattern 1 flashes once per second, while Pattern 2 flashes twice

per second. The table below explains what each flash pattern indi-

cates.

Self-timer lamp

Operation/Flash charge lamp

APPENDIX

108

■ REC Mode

IMPORTANT!

•Never remove the memory card from the camera

while the operation/flash charge lamp is flashing. Do-

ing so will cause recorded images to be lost.

■ PLAY Mode

■ AUDIO Mode (EX-M2 only)

Operation/Flash

Charge Lamp Self-timer Lamp

Color

Green

Red

Green

Status

Lit

Pattern 2

Lit

Pattern 1

Pattern 2

Color Status

Power on

Deleting image

Memory error

Low battery alert

Formatting

Powering down

Meaning

Operation/Flash

Charge Lamp Self-timer Lamp

Color

Green

Status

Lit

Color Status

Power on, LCD remote

controller not connected

Meaning

Operation/Flash

Charge Lamp Self-timer Lamp

Color

Green

Amber

Green

Red

Green

Status

Lit

Pattern 1

Lit

Pattern 2

Pattern 1

Pattern 2

Lit

Pattern 1

Pattern 2

Color

Red

Status

Pattern 1

Pattern 2

Power on

Flash charging

Monitor screen off

Storing image

Self-timer countdown

(10 to 3)

Self-timer countdown

(3 to 1)

Memory error

Memory full

Low battery alert

Monitor screen disabled

Powering down

Meaning

APPENDIX

109

USB Cradle Indicator Lamps

The USB cradle has two indicator lamps: a CHARGE lamp

and a USB lamp. These lamps light and flash to indicate the

current operational status of the cradle and camera.

CHARGE lamp USB lamp

Color

Red

Green

Amber

Red

Status

Lit

Flashing

Color

Green

Status

Lit

Flashing

Charging

Charging complete

Charge standby

Charge error

USB connection

Accessing computer

Meaning

USB lamp

CHARGE lamp

APPENDIX

110

Power does not turn on.

Camera suddenly powers

down.

Image is not recorded when

the shutter release button is

pressed.

Camera powers down dur-

ing self-timer countdown.

Recorded images are not

saved in memory.

The battery is dead.

1) Auto Power Off activated (page 29).

2) The battery is dead.

1) Mode selector is set to “PLAY” or “AUDIO”.

2) Flash unit is being charged.

3) Memory is full.

The battery is dead.

1) Camera powers down before the save operation

is complete.

2) Removing the memory card before the save op-

eration is complete.

Charge the battery (page 24). If the battery goes

dead soon after being charged, it means the battery

has reached the end of its life and needs to be re-

placed.

Purchase a separately available NP-20 recharge-

able lithium ion battery.

1) Turn power back on.

2) Charge the battery (page 24).

1) Align the mode selector with “REC”.

2) Wait until the flash unit finishes charging.

3) Transfer files you want to keep to your computer

and then delete files from camera memory, or

use a different memory card.

Charge the battery (page 24).

1) When the battery indicator shows , charge

the battery as soon as possible (page 24).

2) Do not remove the memory card before the save

operation is complete.

Power Supply

Image Recording

Symptom Possible Cause Action

Troubleshooting Guide

APPENDIX

111

Color of the playback image

is different from the image

on the monitor screen dur-

ing recording.

Images are not displayed.

Cannot playback audio,

cannot hear audio, or can-

not control the audio play-

back using the remote con-

troller.

Playback time is short.

Position the camera so sunlight does not shine di-

rectly into the lens.

This camera cannot display non-DCF images re-

corded onto a memory card using another digital

camera.

1) Align the mode selector with “AUDIO”.

2) Transfer MP3 files to the camera’s AUDIO folder.

3) Correctly connect the headphones to the head-

phones jack.

4) Adjust the volume to a higher level.

5) Charge the battery (page 24).

6) Slide the remote controller lock switch in the op-

posite direction of the arrow marking to unlock

the controls.

7) Check the files you are trying to play (page 96).

8) Check to make sure the PLAYLIST.TXT file lists

the MP3 files you want to play.

Charge the battery (page 24).

Sunlight or light from another source is shining di-

rectly into the lens during recording.

A memory card with non-DCF images recorded

with another camera is loaded in the camera.

1) Mode selector is set to “REC” or “PLAY”.

2) There is no MP3 file data in memory. This is indi-

cated by the message “NoData” on the remote

controller LCD.

3) Stereo headphones are not connected correctly.

4) Volume setting is too low.

5) The battery is dead.

6) The remote controller buttons are locked.

7) There are no playable files.

8) Improper PLAYLIST.TXT file contents

The battery is dead.

Playback

Audio Playback

Symptom Possible Cause Action

* Note that audio player capabilities are available with the EX-M2 only.

APPENDIX

112

Other

Symptom Possible Cause Action

All buttons and switches are

disabled.

Monitor screen is off.

Cannot transfer files over a

USB connection.

Circuit problem caused by electrostatic charge, im-

pact, etc. while the camera was connected to an-

other device.

1) “LCD-OFF” is selected for the “Indicators” setting

on the REC tab.

2) USB communication is in progress.

1) Camera is not set securely on the USB cradle.

2) USB cable is not connected securely.

3) USB driver is not installed.

4) Camera is turned off.

Remove the battery from the camera, reinsert it,

and then try again.

1) On the REC tab menu, change the “Indicators”

setting to “LCD-ON” (page 51).

2) After confirming that the computer is not access-

ing camera memory, disconnect the USB cable.

1) Check the connection between the camera and

USB cradle.

2) Check all connections.

3) Install the USB driver on your computer (page

81).

4) Turn on the camera.

APPENDIX

113

Memory Full

Record Error

Folder cannot be

created.

The card is locked.

There are no files.

This file cannot be

played.

No Favorites file!

This function cannot

be used.

Battery is low.

Display Messages

Memory is full. If you want to record more files, de-

lete files you no longer need (page 62).

Image compression could not be performed during

image data storage for some reason. Record the

image again.

This message appears when you try to record an

image while there are 9,999 files stored in the 999th

folder. If you want to record more files, delete files

you no longer need (page 62).

The LOCK switch of the SD memory card is locked.

You cannot store images to or delete images from a

memory card that is locked.

There are no files in built-in memory or on the

memory card.

The image file or audio file is corrupted, or is a type

that cannot be displayed by this camera.

There is no FAVORITE file.

You attempted to copy files from built-in memory to

a memory card while there is no memory card

loaded in the camera (page 79).

The battery is dead.

The battery is dead, so the recorded image or audio

recording file could not be saved.

The memory card is not formatted. Format the

memory card (page 78).

Some problem occurred with the memory card. Turn

off the camera, and remove and then re-insert the

memory card. If the same message appears, format

the memory card (page 78).

IMPORTANT!

Formatting the memory card deletes all files on

the memory card. Before formatting, try transfer-

ring recoverable files to a computer or some

other storage device.

The function you are trying to perform is not sup-

ported for the file on which you are trying to perform

it.

Your camera system is corrupted. Contact your re-

tailer or a CASIO authorized service center.

File could not be

saved because

battery is low.

The card is not

formatted.

Card ERROR

The function is not

supported for this

file.

SYSTEM ERROR

APPENDIX

114

Specifications

Main Specifications

Product ............................... Digital Camera

Model .................................. EX-S2/EX-M2

■Camera Functions

Image Files Format

Snapshots: ...................... JPEG (Exif Version 2.2); DCF (Design

Rule for Camera File System)1.0 stan-

dard; DPOF compliant

Movies: ............................ AVI (Motion JPEG)

Audio: .............................. WAV (EX-M2 only)

Recording Media: .............. 12MB built-in flash memory

SD Memory Card

MultiMedia Card

Image Size

Snapshots: ...................... 1600 x 1200pixels

1280 x 960pixels

640 x 480pixels

Movies: ............................ 320 x 240pixels

• Movies (320 x 240 pixels)

File Size

(pixels)

1600 x 1200

(UXGA)

1280 x 960

(SXGA)

640 x 480

(VGA)

Quality

Fine

Normal

Economy

Fine

Normal

Economy

Fine

Normal

Economy

Approximate

Image File Size

900KB

630KB

370KB

680KB

460KB

250KB

190KB

140KB

90KB

Built-in flash

memory 12MB

11 shots

16 shots

29 shots

15 shots

24 shots

42 shots

56 shots

74 shots

118 shots

SD Memory

Card* 64MB

60 shots

85 shots

154 shots

82 shots

126 shots

220 shots

294 shots

386 shots

618 shots

Approximate Memory Capacity and File sizes

• Snapshots

Data Size

Recording

Time

150KB/second max.

One Movie: 30 seconds maximum

Total Movie Time:

80 seconds maximum (built-in memory)

410 seconds maximum (SD 64MB memory card)*

*Based on Matsushita Electric Industrial Co., Ltd. products. Capacity depends

on card manufacturer.

*To determine the number of images that can be stored on a memory card of a

different capacity, multiply the capacities in the table by the appropriate

value.

APPENDIX

115

Delete .................................. Single-file, all files (with protection)

Effective Pixels:................. 2.0 million

Imaging Element: .............. 1/1.8-inch square pixel color CCD

(Total pixels: 2.11 million)

Lens/Focal Distance ......... F3.2/f = 7.5mm

(Equivalent to 36mm on a 35mm film

camera.)

Zoom ................................... 4X digital zoom

Focusing............................. Fixed focal point

Approximate Focus Range

(from lens surface) ............ 1m to ∞

Exposure Control

Metering: ......................... Multi-pattern by imaging element

Exposure: ........................ Program AE

Exposure Compensation

: ... –2EV to +2EV (in 1/3EV steps)

Shutter ................................ CCD shutter, mechanical shutter

1/4 to 1/7000 second

Aperture: ............................ F3.2 fixed

White Balance .................... Automatic/fixed (4 modes) /Manual

Self-timer ............................ 10 seconds

Built-in Flash

Flash Modes:................... Auto, Off, On, Red-eye reduction

Approximate Flash Range

: ... 1 meter to 2 meters

Recording Functions ........ Snapshot (with audio for EX-M2 only);

self-timer; Best Shot; Movie (with audio

for EX-M2 only); voice recording (EX-

M2 only)

*Audio is monaural

Audio Recording Time (EX-M2 only)

Audio Snapshot:..............Approximately 30 seconds maximum

per image

Voice Recording:............. Approximately 50 minutes with built-in

memory

After Recording: ..............Approximately 30 seconds maximum

per image

Monitor Screen .................. 1.6-inch TFT color LCD

84,960 pixels (354 x 240)

Viewfinder .......................... Monitor screen and optical viewfinder

Timekeeping Functions .... Built-in quartz digital clock

Date and Time: ...............Recorded with image data

Auto Calendar: ................To 2049

Input/Output Terminals .... Cradle connector

(EX-M2 connector is also used for con-

nection of remote controller.)

Speaker ............................... 20mm round, monaural (EX-M2 only)

APPENDIX

116

■ Audio Player Function (EX-M2 Only)

Data Compression/

Decompression ................. MP3 (MPEG-1 Audio Layer-3)

Sampling Frequencies ...... 32kHz, 44.1kHz, 48kHz

Bit Rates ............................. 32 to 320 kbps, VBR-compatible

Play Mode ........................... Normal, all track repeat, 1-track repeat

Practical Maximum

Headphone Output ............ 9mW + 9mW (16 Ω)

A bit rate of 128kbps and a sampling frequency of 44.1kHz are recommended

for MP3 files. The values noted above are approximate values until power fails at normal tem-

perature (25°C)(page 26). The above does not guarantee that you will be able to

achieve this level of operation. Low temperatures shorten battery life. Voice re-

cording times are based on continuous recording, while audio playback times

are based on continuous output (through headphones).

*Voice recording and audio playback times apply to the EX-M2 only.

Power Consumption ......... DC 3.7V Approximately 3.1W

65 minutes (390 shots)

110 minutes

80 minutes

330 minutes

Continuous Recording

Continuous Playback (Continuous

Snapshot Recording)

Continuous Voice Recording*

Continuous Audio Playback*

■ Power Supply

Power Requirements ........ Rechargeable lithium ion battery (NP-

20) x 1

Approximate Battery Life:

APPENDIX

117

■ Other

Dimensions

EX-S2: ............................. 88(W) x 55(H) x 11.3(D) mm

(3.5˝(W) x 2.2˝(H) x 0.4˝(D))

(excluding projections)

EX-M2: ............................ 88(W) x 55(H) x 12.4(D) mm

(3.5˝(W) x 2.2˝(H) x 0.5˝(D))

(excluding projections)

Weight

EX-S2: ............................. Approximately 88 g (3.1 oz)

(excluding battery and accessories)

EX-M2: ............................ Approximately 90 g (3.2 oz)

(excluding battery and accessories)

Bundled Accessories........ Rechargeable lithium ion battery (NP-

20); USB Cradle; Special AC Adaptor;

AC power cord; Strap; Special USB

cable; Dummy Card; Connector Cover;

LCD Remote Controller (bundled with

EX-M2 only); Stereo Headphones

(bundled with EX-M2 only); CD-ROM;

Basic Reference; Rechargeable Lithium

Ion Battery User’s Guide

■ USB Cradle

Input/Output Terminals .... Camera connector; USB port; AC adap-

tor terminal (DC IN 5.3V)

Power Consumption ......... DC 5.3V Approximately 3.4W

Dimensions ........................95(W) x 55.5(H) x 39.5(D) mm

(3.7˝(W) x 2.2˝(H) x 1.6˝(D))

(excluding projections)

Weight .................................Approximately 56 g (2.0 oz)

■ LCD Remote Controller (Bundled with EX-M2 Only)

Input/Output Terminals .... Camera connector; headphones jack

(ø3.5mm stereo mini jack)

Cord Length ....................... Approximately 0.8m (31.5˝)

Dimensions ........................74.5(W) x 16(H) x 11(D) mm

(2.9˝(W) x 0.6˝(H) x 0.4˝(D))

(excluding projections, excluding cradle)

Weight .................................Approximately 28 g (1.0 oz)

Power Supply

•Use only the special NP-20 rechargeable lithium ion battery to power this

camera. Use of any other type of battery is not supported.

•This camera does not require a battery for the clock. The date and time set-

tings of the camera are cleared whenever power supplied by both the battery

and USB cradle is interrupted. Be sure to reconfigure these settings after

power is interrupted (page 32).

LCD Panel

•The LCD panel is a product of the latest LCD manufacturing technology that

provides a pixel yield of 99.99%. This means that less than 0.01% of the total

pixels are defective (they do not turn on or always remain turned on).

Casio EX-M2 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van Casio EX-M2

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info