723405
1
Verklein
Vergroot
Pagina terug
1/3
Pagina verder
Operation Guide DQ-960/961
1
MA0412-EA
SNZ
ON
OFF
ALM
RESET
TEMP.
MAX/MIN
HUMIDITY
MAX/MIN
UP
(+)
DOWN
(–)
SET
CL
E
A
R
°C / °F
1
DQ-960
RESET
TEMP.
MAX/MIN
HUMIDITY
MAX/MIN
UP
(+)
DOWN
()
SET
CLEAR
°C / °F
978
SNZ
ON
OFF
ALM
2
33465
ILLUSTRATION
TEMP.
MAX/MIN
HUMIDITY
MAX/MIN
°C/°F
UP (
+
)
SET
DOWN ()
RESET
CLEAR
SNZ
ON
OFF
ALM
1
DQ-961
SNZ
ON
OFF
ALM
TEMP.
MAX/MIN
HUMIDITY
MAX/MIN
°C/°F
UP (
+
)
SET
DOWN
()
RESET
CLEAR
2
8
6
3
5
79
4
3
A sticker is affixed to the glass of the clock when you purchase it. Be sure to remove the sticker before using the
clock.
Depending on the clock model, the configuration of your clock may differ somewhat from that shown in the
illustration.
Current time
(Hour, minutes, seconds)
Day of the week
Current Humidity
Current Temperature
DATE (month - date)
PM indicator
Alarm time
Snooze on indicator
Alarm on indicator
Alarm Off Snooze Alarm On
Operation Guide DQ-960/961
2
Holding down UP (+) or DOWN () changes the flashing digits at high speed.
You can set the year in the range of 2000 to 2039. The day of the week is set automatically in accordance with
the date setting.
Pressing UP (+) or DOWN () while the Time Setting Screen is on the display causes the seconds count to be
reset to 00.
Each press of UP (+) or DOWN () while the 12-hour/24-hour Timekeeping Screen is on the display toggles
between 12-hour and 24-hour timekeeping.
3. After making the settings you want, use the SET button (5) to display the Normal Timekeeping Screen.
The clock automatically returns to the Normal Timekeeping Screen if you leave a setting screen on the display for
about three minutes without performing any operation.
USING THE ALARM
The alarm sounds and the light turns on when the alarm time you set is reached. You can also use the Alarm Mode
selector (2) to select the snooze alarm feature.
Setting the Alarm Time
Use the DOWN () and UP (+) buttons (3) to set the alarm time.
Pressing the DOWN () and UP (+) buttons (3) causes the alarm time to appear in place of the date on the
display.
UP
(
+
)
DOWN
()
RESET
TEMP.
MAX/MIN
HUMIDITY
MAX/MIN
UP
(+)
DOWN
()
SET
CLEAR
°C / °F
Press to change the
alarm time setting (+)
Press to change the
alarm time setting (
)
Press to change the
alarm time setting (+)
Press to change the
alarm time setting (
)
DQ-960
DQ-961
Holding down UP (+) or DOWN () changes the digits at high speed.
Turning the Alarm On and Off
Use the Alarm Mode selector (2) on the side of the clock to turn the alarm on and off, and to select the snooze
feature.
The alarm time appears in place of the date on the display whenever the Alarm Mode selector (2) is set to ON
or SNZ.
The light also turns on for the first four seconds that the alarm sounds.
The volume of the alarm sound cycles through five levels as it sounds.
Stopping the Alarm
When alarm is sounding, press the SNOOZE/LIGHT button (1) to stop it. When the snooze feature is turned on,
the alarm will sound again in about five minutes.
To turn off the snooze feature, slide the Alarm Mode selector (2) to OFF.
GENERAL GUIDE
11
11
1 SNOOZE/LIGHT button
Press this button to illuminate the display for about four seconds.
Pressing this button while the alarm is sounding stops the alarm.
22
22
2 Alarm Mode selector
SNZ: Snooze alarm on
ON: Alarm on
OFF: Alarm off
33
33
3 UP (+) / DOWN (–) buttons
Use these buttons to change the alarm time or the setting that is flashing on the display.
44
44
4
°C/°F button
Press this button to toggle the temperature units between Celsius and Fahrenheit.
55
55
5 SET button
Use this button when setting the current time.
66
66
6 CLEAR button
Press this button to clear the currently displayed high/low temperature or humidity.
77
77
7 MAX/MIN TEMP. button
Press this button to display the high and low temperature values.
88
88
8 RESET button
Press this button to reset the clock after replacing its batteries.
99
99
9 MAX/MIN HUMIDITY button
Press this button to display the high and low humidity values.
USING THE CLOCK
1. Press the SET button (5) to cycle through the setting screens as shown below.
12-hour/24-hour
Timekeeping Screen
Time Setting ScreenMonth and Day Setting ScreenYear Setting Screen
Normal Timekeeping Screen
2. While the screen you want is displayed, use the DOWN () and UP (+) buttons (3) to change the flashing
digits.
UP
(
+
)
DOWN
()
RESET
TEMP.
MAX/MIN
HUMIDITY
MAX/MIN
UP
(+)
DOWN
()
SET
CLEAR
°C / °F
Press UP (+) to increase
the flashing digits.
Press DOWN () to decrease
the flashing digits.
Press UP (+) to increase
the flashing digits.
Press DOWN () to decrease
the flashing digits.
DQ-960
DQ-961
Alarm Mode selector
SNZ
ON
OFF
Description
The alarm sounds at the preset time for one minute, and seven more times every five
minutes thereafter. Even if you stop the alarm by pressing the SNOOZE/LIGHT
button (1), the alarm sounds again five minutes later.
The indicator
flashes on the display to indicate that the snooze feature is
activated.
The alarm sounds at the preset time for one minute.
The alarm does not sound.
Operation Guide DQ-960/961
3
USING THE LIGHT
Pressing the SNOOZE/LIGHT button (1) turns on the light and illuminates the display for easy reading in the dark.
Important!
Overuse of the light can shorten battery life.
THERMOMETER FUNCTIONS
A built-in sensor measures temperature and shows the measured value on the display. The readout from the
temperature sensor can also be switched between Celsius (°C) and Fahrenheit (°F).
Temperature Measurements
The temperature display shows LO for temperatures below 50°C (58°F) and HI for temperatures above
70°C (158°F).
Though temperature readings are displayed up to 0°C (32°F) and greater than 41°C (105°F), note that such
readings are actually outside the guaranteed temperature range of this clock.
Switching between Celsius and Fahrenheit
Push the °C/°F button (4) to select either Celsius (°C) or Fahrenheit (°F).
°C/°F button (4)
°C
°F
Celsius (°C) Fahrenheit (°F)
High Temperature and Low Temperature Memory
The clock remembers the high and low temperatures it measured since the last time its temperature memories
were cleared. You can recall these values as shown below.
Current temperature
and humidity
MAX/MIN TEMP. button (7)
High temperature
and low temperature
To clear the high temperature and low temperature memory, press the MAX/MIN TEMP. button (7) to display the
current high/low values, and then press the CLEAR button (6). Note that the current high/low values are
displayed for only about five seconds, and you need to press the CLEAR button (6) during that period.
New data starts to be stored after memory is cleared.
CLEAR button (6)
HYGROMETER FUNCTIONS
A built-in sensor measures humidity and shows the measured value on the display.
Humidity Measurements
The humidity display shows LO for humidity below 10% and HI for humidity above 90%.
High Humidity and Low Humidity Memory
The clock remembers the high and low humidity values it measured since the last time its humidity memories
were cleared. You can recall these values as shown below.
Current temperature
and humidity
MAX/MIN HUMIDITY button (9)
High humidity
and low humidity
To clear the high humidity and low humidity memory, press the MAX/MIN HUMIDITY button (9) to display the
current high/low values, and then press the CLEAR button (6). Note that the current high/low values are
displayed for only about five seconds, and you need to press the CLEAR button (6) during that period.
CLEAR button (6)
BATTERY REPLACEMENT
Replace batteries whenever the display of the clock becomes dim and difficult to read.
1. Open the battery compartment cover as shown in the illustration.
2. Remove all of the old batteries.
3. Load a full set of new batteries. Make sure that their positive (+) and negative () ends face in the correct
directions. If you load batteries incorrectly, they can burst and damage the clock.
4. Replace the battery compartment cover.
5. Press the RESET button (8). Be sure to press the RESET button (8) after replacing batteries.
Battery precautions
Keep batteries out of the reach of small children. If a battery is accidentally swallowed, contact your physician
immediately.
Be sure to load the batteries with their positive (+) and negative () ends facing correctly.
Never mix old and new batteries, or batteries of different brands.
Never charge the batteries that come with the clock.
Should batteries ever leak while in the clock, wipe out the fluid with a cloth, taking care not to let any get onto
your skin.
Replace the batteries at least once a year, even if the current batteries are working properly.
The batteries that come with the clock lose some of their power during transport and storage.
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Casio DQ-960 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Casio DQ-960 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,66 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info