723237
110
Verklein
Vergroot
Pagina terug
1/157
Pagina verder
EN-109
Using the MIDI Recorder to Record
5.
When you are editing the system track, you
can specify the event input target part.
See “Selecting a System Track Part” (page EN-110).
This step is not necessary when you are editing a solo
track. Proceed to step 6.
6.
If necessary, specify the velocity (keyboard
touch) and gate time rate (actual length) of the
note event you are about to input.
The velocity and gate time rate settings you specify
here are applied to all of the note events you input until
you change them.
Velocity can be specified as a value (1 to 127) or by
actually pressing a key (which sets a velocity in
accordance with your key pressure). The initial default
is 100.
The gate time rate specifies the note length as a
percentage (1 to 100%) of the note value you specify
in step 7. For example, when the gate time rate is 80%
(initial default), a quarter note (96 ticks) becomes 76
ticks (96×0.8=76.8, decimal part cut off).
* When “Key On” is selected, the velocity of the keyboard
press when inputting the note event is reflected in the
velocity value.
7.
Specify the note value (event length) of the
event you are about to input in step 8.
*1 If you want to input a dotted note or triplet note, first press
a key from [1] to [6], and then press [7] or [8]. To input a
dotted quarter note, for example, press [3] and then [7].
The note value specified in accordance with the key
input will appear on the right side of the display.
8.
Specify the event to be input.
*2 Extends the length of the previously input note event. For
example, if you input a quarter note event and wish to
extend it by an eighth note, perform the following button
operation: bm number key [4] (eighth note) -
cs REGISTRATION [3] (Tie).
Inputting an event advances the input point by the note
value amount you specified in step 7.
9.
Repeat steps 5 through 8 as required.
The operation in step 5 is not necessary as long as the
target part remains the same.
10.
To exit the Step Input Mode, press
cs REGISTRATION [1].
This causes the [STEP] indicator to disappear.
To specify this: Perform this operation:
Velocity (1) Press cs REGISTRATION [4].
(2) Use bn [–] and [+], or the bl dial to
specify a value or select “Key
On”.*
(3) Press the [4] (EXIT) bm number
key.
Gate Time Rate (1) Press cs REGISTRATION [5].
(2) Use bn [–] and [+] or the bl dial to
specify a percent value.
(3) Press the [4] (EXIT) bm number
key.
To input this note value: Press this bm number key:
Whole [1]
Half [2]
Quarter [3]
Eighth [4]
Sixteenth [5]
Thirty-second [6]
Dotted note*
1
[7]
Triplet*
1
[8]
To input this: Perform this operation:
Note event After specifying a note value in step 7,
press the keyboard key for the note
you want to input. Pressing multiple
keyboard keys at the same time inputs
a chord.
Rest After specifying a note value in step 7,
press cs REGISTRATION [2].
Tie*
2
After specifying a note value of a note
to tie with the previous note event in
step 7, press cs REGISTRATION
[3].
2 26
CTX5000_3000_EN.book 109 ページ 2018年2月26日 月曜日 午後3時56分
110

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Casio CT-X5000 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Casio CT-X5000 in de taal/talen: Engels, Spaans als bijlage per email.

De handleiding is 12,37 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Casio CT-X5000

Casio CT-X5000 Gebruiksaanwijzing - Nederlands - 155 pagina's

Casio CT-X5000 Gebruiksaanwijzing - Deutsch - 155 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info