27153
21
Verklein
Vergroot
Pagina terug
1/36
Pagina verder
E-17
To record to one track while playing
back from the other track
This procedure is basically the same as that under To record
notes from the keyboard on page E-16.
Example: To play back Track A while recording to Track B
1
Select the track you want to play back.
While holding down the CONTROL button, press the
RECORD button as many times as necessary so the
Track A indicator lamp is lit.
2
Press the RECORD button to enter record standby.
This causes the Track A lamp to flash. While holding
down the CONTROL button, press the RECORD
button so the Track B indicator lamp is flashing.
3
Start recording.
Press the START/STOP button to start recording to
Track B as Track A plays back. Play in time with the
playback from Track A.
MEMO
You can adjust the tempo and beat during record
standby. Playback, however, is performed using the
tempo and beat that was selected when Track A was
selected.
Playback
Use the following procedure to play back from memory.
To playback from memory
1
Select the track(s) you want to play back.
While holding down the CONTROL button, press the
RECORD button. Each press of the RECORD button
causes the indicator lamps to cycle between the three
states shown below.
A track whose indicator lamp is lit is in playback
standby.
If you want to play back both tracks, both of the
RECORD buttons indicator lamps should be lit.
420A-E-021A
Using the Memory
2
Press the START/STOP button to start playback.
You can toggle the playback metronome sound on and
off by pressing the METRONOME button.
Playback stop automatically when the end of the tune
is reached.
To stop part way through, press the START/STOP
button.
To stop the metronome, press the METRONOME
button.
NOTE
You can change the playback tempo while playing back
from memory.
You cannot change the tone when playing back from
memory.
Deleting Memory Contents
IMPORTANT!
The delete operation cannot be undone. Make sure you
play back song memory contents and confirm that you
no longer need it before performing the following
procedure.
To delete the contents of a specific track
1
Enter record standby.
While holding down the CONTROL button, press the
RECORD button. Each press of the RECORD button
causes the indicator lamps to toggle between the two
states shown below. Make sure that the indicator lamp
for the track whose contents you want to delete is
flashing.
2
Press the START/STOP button twice to delete the
contents of the selected track.
To delete the contents of both tracks
1
Hold down the RECORD button for at least two
seconds, until the indicator lamps of both tracks
start to flash.
This indicates that the contents of both tracks have
been deleted.
Track A
Indicator
Lamp Lit
Track B
Indicator
Lamp Lit
Both
Indicator
Lamp Lit
Track A
Indicator Lamp
Flashing
Track B
Indicator Lamp
Flashing
21

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Casio AP24 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Casio AP24 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,92 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Casio AP24

Casio AP24 Gebruiksaanwijzing - Nederlands - 30 pagina's

Casio AP24 Gebruiksaanwijzing - Deutsch - 32 pagina's

Casio AP24 Gebruiksaanwijzing - Espanôl - 34 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info