723285
20
Verklein
Vergroot
Pagina terug
1/76
Pagina verder
AP700-ES-1B
EN/ES
USER’S GUIDE
GUÍA DEL USUARIO
Please keep all information for future reference.
Por favor guarde toda la documentación para futuras consultas.
Safety Precautions
Before trying to use the piano, be sure to read
the separate “Safety Precautions”.
Precauciones de seguridad
Antes de intentar usar el piano, asegúrese de
leer las “Precauciones de seguridad” separadas.
EnglishEspañol
AP-700
This recycle mark indicates that the packaging conforms to
the environmental protection legislation in Germany.
Esta marca de reciclaje indica que el empaquetado se
ajusta a la legislación de protección ambiental en Alemania.
MA1504-B Printed in China
C
AP700-ES-1B.indd 1 2015/04/06 12:22:55
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Important!
Please note the following important information before using this product.
Before using the AD-E24500LW Adaptor to power the unit, be sure to check the AC Adaptor for any damage first. Carefully check the power
cord for breakage, cuts, exposed wire and other serious damage. Never let children use an AC adaptor that is seriously damaged.
The product is not intended for children under 3 years.
Use only CASIO AD-E24500LW adaptor.
The AC adaptor is not a toy.
Be sure to disconnect the AC adaptor before cleaning the product.
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other.
A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit
from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury
from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as
power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.
The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the
apparatus.
The power indicator being unlit does not mean the apparatus is completely disconnected from the MAINS.
When you need to have the apparatus completely disconnected from the MAINS, you must unplug the power cord. For that purpose, locate
the apparatus in a way that secures easy access to the power cord.
NOTICE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC CAUTION
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the
equipment.
Declaration of Conformity
Model Number: AP-700
Trade Name: CASIO COMPUTER CO., LTD.
Responsible party: CASIO AMERICA, INC.
Address: 570 MT. PLEASANT AVENUE, DOVER, NEW JERSEY 07801
Telephone number: 973-361-5400
This device complies with Part 15 of the FCC Rules, Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
Manufacturer:
CASIO COMPUTER CO., LTD.
6-2, Hon-machi 1-chome, Shibuya-ku, Tokyo 151-8543, Japan
Responsible within the European Union:
Casio Europe GmbH
Casio-Platz 1, 22848 Norderstedt, Germany
www.casio-europe.com
Declaration of Conformity According to EU Directive
EN-1
AP700-ES-1B.indd 3 2015/04/06 12:22:55
EN-2
Contents
General Guide EN-4
Power Outlet EN-6
Turning Power On or Off. . . . . . . . . . . . . . . . . . EN-6
Auto Power Off . . . . . . . . . . . . . . . . . . . . . . . . . . . EN-6
Adjusting the Volume Level. . . . . . . . . . . . . . . . EN-6
Adjusting Display Contrast . . . . . . . . . . . . . . . . EN-7
Returning the Digital Piano to Its
Factory Default Settings. . . . . . . . . . . . . . . . . EN-7
Operation Lock . . . . . . . . . . . . . . . . . . . . . . . . . EN-7
Operations Common to All Modes EN-8
About the Home Screen . . . . . . . . . . . . . . . . . . EN-8
Navigating Between Setting Screens . . . . . . . . EN-8
Selecting an Item (Parameter) to
Change Its Setting . . . . . . . . . . . . . . . . . . . . . EN-8
Changing a Number or a Value. . . . . . . . . . . . . EN-8
To scroll a number sequentially . . . . . . . . . . . . . . . EN-8
To fast scroll a number . . . . . . . . . . . . . . . . . . . . . EN-8
Setting Shortcut Menus. . . . . . . . . . . . . . . . . . . EN-9
Starting and Stopping Playback . . . . . . . . . . . . EN-9
To repeat play a specific section of a song . . . . . . EN-9
Playing with Different Tones EN-10
Selecting and Playing a Tone . . . . . . . . . . . . . EN-10
To select a tone in a tone group . . . . . . . . . . . . . EN-10
To use the tone list to select a tone . . . . . . . . . . . EN-10
Using the Digital Piano’s Pedals . . . . . . . . . . . EN-11
To adjust the half pedal trigger position . . . . . . . . EN-11
Adjusting Acoustic Piano Sound
Characteristics . . . . . . . . . . . . . . . . . . . . . . . EN-12
Using Effects. . . . . . . . . . . . . . . . . . . . . . . . . . EN-13
To apply a hall simulator . . . . . . . . . . . . . . . . . . . EN-13
To select a listening position . . . . . . . . . . . . . . . . EN-13
To apply chorus to a tone . . . . . . . . . . . . . . . . . . EN-14
To adjust brilliance. . . . . . . . . . . . . . . . . . . . . . . . EN-14
About DSP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EN-14
Splitting the Keyboard for Duet Play . . . . . . . . EN-14
To change the octaves of the duet keyboards . . . EN-15
Layering Two Tones . . . . . . . . . . . . . . . . . . . . EN-16
To adjust the volume balance between
two layered tones . . . . . . . . . . . . . . . . . . . . . . EN-16
To change the octave of each layer . . . . . . . . . . . EN-17
Splitting the Keyboard between
Two Different Tones. . . . . . . . . . . . . . . . . . . EN-17
To modify split settings . . . . . . . . . . . . . . . . . . . . EN-18
Using the Metronome . . . . . . . . . . . . . . . . . . . EN-19
To start and stop . . . . . . . . . . . . . . . . . . . . . . . . EN-19
To adjust the tempo . . . . . . . . . . . . . . . . . . . . . . EN-19
To configure metronome settings . . . . . . . . . . . . EN-19
Changing Keyboard Response to
Touch Pressure (Touch Response) . . . . . . . EN-20
To change touch response sensitivity . . . . . . . . . EN-20
Changing the Pitch
(Transpose, Tuning, Octave Shift) . . . . . . . . EN-20
To change the pitch in semitone steps
(Transpose) . . . . . . . . . . . . . . . . . . . . . . . . . . . EN-20
Fine Tuning (Tuning) . . . . . . . . . . . . . . . . . . . . . . EN-21
To change the tuning curve (Stretch Tuning). . . . EN-21
Octave Shift . . . . . . . . . . . . . . . . . . . . . . . . . . . . EN-22
Changing the Temperament of
the Keyboard . . . . . . . . . . . . . . . . . . . . . . . . EN-22
Using Built-in Songs
(Concert Play, Music Library) EN-23
Concert Play . . . . . . . . . . . . . . . . . . . . . . . . . . EN-23
To listen to a Concert Play Song (Listen Mode). . EN-23
To play along with an orchestra using
Concert Play (Play Mode) . . . . . . . . . . . . . . . . EN-24
To adjust the playback volume level of a
Concert Play song. . . . . . . . . . . . . . . . . . . . . . EN-25
Concert Play Songs Obtained
with a Computer, etc. . . . . . . . . . . . . . . . . . . EN-25
To save Concert Play songs obtained
with a computer, etc. to a USB flash drive. . . . EN-25
To play back Concert Play songs obtained
with a computer, etc. . . . . . . . . . . . . . . . . . . . EN-25
Music Library. . . . . . . . . . . . . . . . . . . . . . . . . . EN-25
To play back a specific music library song . . . . . EN-26
To practice with a music library song . . . . . . . . . EN-26
Playing Back Song Data Stored on a
USB Flash Drive. . . . . . . . . . . . . . . . . . . . . . EN-27
To adjust the playback volume level of
song data . . . . . . . . . . . . . . . . . . . . . . . . . . . . EN-27
Demo Song EN-28
Performing Demo Play . . . . . . . . . . . . . . . . . . EN-28
Comparing Grand Piano Tones . . . . . . . . . . . EN-29
Getting Ready EN-55
Assembling the Stand . . . . . . . . . . . . . . . . . EN-55
To connect the cables . . . . . . . . . . . . . . . . . EN-58
Keyboard Cover . . . . . . . . . . . . . . . . . . . . . . EN-59
To install the music stand and
headphones hook . . . . . . . . . . . . . . . . . . . EN-59
Opening and Closing the Piano Lid . . . . . . . EN-60
Removing the Protective Tape from
the Keyboard
. . . . . . . . . . . . . . . . . . . . . . . EN-61
Power Outlet . . . . . . . . . . . . . . . . . . . . . . . . . EN-61
Connecting Headphones. . . . . . . . . . . . . . . . EN-62
Connecting Audio Equipment or
an Amplifier . . . . . . . . . . . . . . . . . . . . . . . . EN-62
Bundled and Optional Accessories . . . . . . . . EN-63
AP700-ES-1B.indd 4 2015/04/06 12:22:55
Contents
EN-3
English
Recording and Playback EN-30
MIDI Recorder
(Recording to Digital Piano Memory) . . . . . . EN-32
To record to a specific song track . . . . . . . . . . . . EN-32
To record the other track of a song . . . . . . . . . . . EN-33
To configure precount settings . . . . . . . . . . . . . . EN-33
To play back from Digital Piano memory . . . . . . . EN-34
To adjust the playback volume level of a
MIDI Recorder song. . . . . . . . . . . . . . . . . . . . . EN-34
To delete recorded data . . . . . . . . . . . . . . . . . . . EN-34
Audio Recorder
(Recording to a USB Flash Drive) . . . . . . . . EN-35
To record keyboard play to a USB flash drive . . . EN-35
To record keyboard play while playing back a
MIDI Recorder song or song data . . . . . . . . . . EN-36
To play back data recorded on a
USB flash drive . . . . . . . . . . . . . . . . . . . . . . . . EN-36
To adjust the Audio Recorder volume level . . . . . EN-36
To delete the currently selected
Audio Recorder song data . . . . . . . . . . . . . . . . EN-37
Configuring Digital Piano Settings EN-38
Configuring Settings . . . . . . . . . . . . . . . . . . . . EN-38
Parameter List. . . . . . . . . . . . . . . . . . . . . . . . . EN-39
USB Flash Drive EN-44
Preparing a USB Flash Drive . . . . . . . . . . . . . EN-45
Supported USB Flash Drives . . . . . . . . . . . . . . . . EN-45
Data Types Supported by the Digital Piano . . . . . EN-46
To connect a USB flash drive to and
to detach it from the Digital Piano . . . . . . . . . . EN-47
To format a USB flash drive. . . . . . . . . . . . . . . . . EN-48
Saving Standard Song Data to a
USB Flash Drive . . . . . . . . . . . . . . . . . . . . . EN-48
Saving Digital Piano Data to a
USB Flash Drive . . . . . . . . . . . . . . . . . . . . . EN-49
Loading USB Flash Drive Data into
Digital Piano Memory. . . . . . . . . . . . . . . . . . EN-50
Deleting USB Flash Drive File. . . . . . . . . . . . . EN-51
Renaming a USB Flash Drive File . . . . . . . . . EN-51
Error Indicators . . . . . . . . . . . . . . . . . . . . . . . . EN-52
Connecting to a Computer EN-53
Minimum Computer System Requirements . . EN-53
Connecting the Digital Piano to
Your Computer. . . . . . . . . . . . . . . . . . . . . . . EN-53
Using MIDI . . . . . . . . . . . . . . . . . . . . . . . . . . . EN-54
What is MIDI? . . . . . . . . . . . . . . . . . . . . . . . . . . . EN-54
Troubleshooting EN-64
Reference EN-66
Product Specifications. . . . . . . . . . . . . . . . . . . EN-66
Operating Precautions . . . . . . . . . . . . . . . . . . EN-68
Appendix A-1
Tone List ..............................................................A-1
Concert Play List ..................................................A-2
Music Library List .................................................A-3
Grand Piano Demo Song List ..............................A-3
MIDI Implementation Chart
Any reproduction of the contents of this manual, either in part or its entirety, is prohibited. Except for your
own, personal use, any other use of the contents of this manual without the consent of CASIO is prohibited
under copyright laws.
IN NO EVENT SHALL CASIO BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING,
WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION, LOSS OF
INFORMATION) ARISING OUT OF THE USE OF OR INABILITY TO USE THIS MANUAL OR PRODUCT,
EVEN IF CASIO HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
The contents of this manual are subject to change without notice.
The actual appearance of the product may be different from that shown in the illustrations in this User’s
Guide.
Company and product names used in this manual may be registered trademarks of others.
AP700-ES-1B.indd 5 2015/04/06 12:22:55
EN-4
General Guide
The following explains the meaning of the $ symbol that appears on the product console and with the key
names below.
The names shown here are always indicated in bold when they appear within the text of this manual.
$:Indicates a function that is enabled by holding down the button for some time.
1 2 bnbk bl bm bo bp bq br bs bt ck cm cn co cp
cl
3 4 6 8
5 7 9
1P (Power) button
2VOLUME controller
3SETTING button
4OPERATION LOCK$ button
5Tone group buttons
6LCD display
7HALL SIMULATOR buttons
8METRONOME button
9TEMPO buttons
bkDUET button
blREPEAT button
bms (Rewind) button
bnd (Fast Forward) button
boY (Stop) button
bpX/k (Start/pause) button
bqREC button
brCONCERT PLAY button
bsSONG button
btVOLUME button
ckEXIT button
clArrow buttons
cmENTER button
cnLAYER button
coBRILLIANCE button
cpUSB button
AP700-ES-1B.indd 6 2015/04/06 12:22:55
General Guide
EN-5
English
Bottom
Front
Rear
Pedal connector
DC 24V terminal
USB port
LINE OUT R, L/MONO jacks
LINE IN R, L/MONO jacks MIDI OUT/IN
terminals
PHONES jacks
Power lamp
USB Flash Drive
Port
AP700-ES-1B.indd 7 2015/04/06 12:22:55
EN-6
Power Outlet
After you finish assembling the stand, turn on the
Digital Piano. For details, see “Getting Ready” on page
EN-55.
1.
Press the 1P (Power) button to turn on
Digital Piano power.
This causes the 1P (Power) button to light.
If you press 1P (Power) button only lightly, the
display will light up momentarily but power will not
turn on. This does not indicate malfunction. Press
1P (Power) button firmly and completely to turn
on power.
2.
To turn off the Digital Piano, hold down the
1P (Power) button until its light goes out.
You can configure the Digital Piano to save its setup
when power is turned off. For details, see
“Configuring Digital Piano Settings” on page EN-38,
and “General” 3 “Auto Resume” in the “Parameter
List” on page EN-42.
Pressing the 1P (Power) button to turn off power
actually puts the Digital Piano into a standby state.
Minute amounts of current continue to flow within the
Digital Piano in the standby state. If you do not plan
to use the Digital Piano for a long time or if there is a
lightning storm in your area, be sure to unplug the
AC adaptor from the power outlet.
The message “Please Wait...” will remain on the
display while a data save operation is in progress.
Do not perform any other operation while it is
displayed. Turning off the Digital Piano can cause
Digital Piano data to be deleted or become
corrupted.
This Digital Piano is designed to turn off automatically
to avoid wasting power after no operation is
performed for a preset amount of time. The Auto
Power Off trigger time is about four hours.
You also can use the procedure below to temporarily
suspend Auto Power Off.
To disable Auto Power Off
1.
Press the 3SETTING button to display the
setting screen.
2.
Use the clw and q arrow buttons to
select “General” and then press the
cmENTER button.
3.
Use the clw and q arrow buttons to
select “Auto Power Off”.
4.
Use the clu and i arrow buttons to select
“Off”.
5.
Press the 3SETTING button to exit the
setting screen.
To re-enable Auto Power Off, perform the above
procedure and select “On” in step 4.
1.
Use the 2VOLUME controller to adjust the
volume.
Your Digital Piano has a Volume Sync Equalizer
feature that automatically enhances tone quality in
accordance with the volume level. This feature
ensures that low range and/or high range sounds
are easier to hear, even at low volume levels. For
details, see “General”3”Volume Sync EQ” in the
“Parameter List” (page EN-39).
Turning Power On or Off
Auto Power Off
Adjusting the Volume Level
z G e n e r a l > E n t
AP700-ES-1B.indd 8 2015/04/06 12:22:56
Power Outlet
EN-7
English
1.
Press the 3SETTING button to display the
setting screen.
2.
Use the clw and q arrow buttons to
select “General” and then press the
cmENTER button.
3.
Use the clw and q arrow buttons to
select “LCD Contrast”.
4.
Use the clu(–) and i(+) arrow buttons to
adjust display contrast.
The contrast setting range is 0 to 26.
5.
Press the 3SETTING button to exit the
setting screen.
Perform the following procedure when you want to
return the Digital Piano’s stored data and settings to
their initial factory defaults.
1.
Press the 3SETTING button to display the
setting screen.
2.
Use the clw and q arrow buttons to
select “General” and then press the
cmENTER button.
3.
Use the clw and q arrow buttons to
select “Factory Reset” and then press the
cmENTER button.
This causes the confirmation message “Initialize
All?” to appear.
4.
Press the cmENTER button.
This will cause the confirmation message “Sure?” to
appear.
5.
Press the cli arrow button to execute the
initialize operation.
To cancel the initialize operation, press the clu
arrow button.
The message “Please Wait...” will remain on the
display while the operation is being performed. Do
not perform any operation while this message is on
the display. “Complete!” appears on the display after
the operation is complete.
Enable this setting when you want to protect against
unintentional button operations.
It locks most of the Digital Piano’s buttons, so their
operations are disabled.
Only operation of the 1P (Power) and
4OPERATION LOCK buttons remain enabled.
1.
Hold down the 4OPERATION LOCK button
until its lamp lights.
2.
To unlock operations, press the
4OPERATION LOCK button again.
This will cause the lamp above the button to go out.
Adjusting Display Contrast
Returning the Digital Piano to
Its Factory Default Settings
Operation Lock
AP700-ES-1B.indd 9 2015/04/06 12:22:56
EN-8
Operations Common to All Modes
The operations described in this section are common to
all modes and functions.
Turning on the Digital Piano displays a screen that
shows the name of the current selected tone. This is the
Home Screen.
After performing operations, you can navigate back
to the home screen by pressing the ckEXIT button.
If a display item has “>Ent” to the right of it, it means
that pressing the cmENTER button will display a
submenu.
To navigate back to a previous screen, press the
ckEXIT button.
A dot (0) or arrow (X) mark to the left of a parameter
name indicates that the parameter is selected.
1.
Use the clw and q arrow buttons to move
the mark up or down.
Holding down either button moves the mark at high
speed.
Use the operations in this section to specify a number
or to change a value.
1.
Press the clu (–) or i (+) arrow button.
To return a setting to its initial default, press the
clu and i arrow buttons at the same time.
1.
Hold down the clu (–) or i (+) arrow
button.
bnbl bm bp ck cm
cl
About the Home Screen
Navigating Between Setting
Screens
Selecting an Item (Parameter)
to Change Its Setting
Changing a Number or a Value
To scroll a number sequentially
To fast scroll a number
AP700-ES-1B.indd 10 2015/04/06 12:22:56
Operations Common to All Modes
EN-9
English
Holding down a button displays a menu of functions and/or tones like the one shown below to appear. The content
of the menu depends on the button that is held down.
Setting Shortcut Menus
Button Name Shortcut Menu Contents More Information
DUET Duet settings “Splitting the Keyboard for Duet Play”, page EN-14
CONCERT PLAY Concert Play volume level setting “To adjust the playback volume level of a Concert Play
song”, page EN-25
SONG Song data settings “Song >Ent” in the “Parameter List”, page EN-41
LAYER Layer settings “Layering Two Tones”, page EN-16
REC MIDI Recorder and Audio Recorder settings “Recording and Playback”, page EN-30
METRONOME Metronome settings “To configure metronome settings”, page EN-19
BERLIN GRAND BERLIN GRAND tone demo songs “Performing Demo Play”, page EN-28
HAMBURG GRAND HAMBURG GRAND tone demo songs
VIENNA GRAND VIENNA GRAND tone demo songs
Use the procedure below with functions that allow
playback of data.
PREPARATION
Select the song you want to play back.
Concert Play: “To listen to a Concert Play Song
(Listen Mode)” (page EN-23)
Music Library: “To play back a specific music
library song” (page EN-26)
MIDI Recorder: “To play back from Digital Piano
memory” (page EN-34)
Audio Recorder: “To play back data recorded on a
USB flash drive” (page EN-36)
1.
Press the bpX/k button to start playback.
Holding down the bms button during playback
fast reverses the track.
Holding down the bnd button during playback
fast forwards the track.
Press and releasing the bms button causes
playback to jump to the beginning of the track.
2.
Press the bpX/k button to pause playback.
Press the bpX/k button again to resume playback.
You can use the procedure in the next section to
repeat play a specific section of a song.
This procedure is not supported during demo song
play (page EN-28).
1.
While a tune is playing, press the
blREPEAT button at when the beginning of
the section you want to repeat (Point A) is
reached.
This causes “A” to flash on the display.
This will cause the blREPEAT button to flash.
2.
Press the blREPEAT button again at when
the end of the section you want to repeat
(Point B) is reached.
This causes “B” to flash on the display along with
“A”.
This will cause the blREPEAT button to stop
flashing and remain lit.
Repeat playback of the section from Point A to Point
B starts automatically.
Holding down the bms button during repeat
playback jumps to Point A. Holding down the bnd
button during playback jumps to Point B.
3.
To exit repeat playback, press the
blREPEAT button.
This will cause “A” and “B” to stop flashing on the
display.
Starting and Stopping
Playback
To repeat play a specific section of a song
AP700-ES-1B.indd 11 2015/04/06 12:22:56
EN-10
Playing with Different Tones
Your Digital Piano has 26 built-in tones, which include
those of the world-renowned grand pianos. It also has
a Hall Simulator and other features (page EN-13) that
let you add effects that give you the feel of playing in
one of the world’s famous concert halls.
Use either of the two procedures below to select a tone.
Select a tone in a tone group
Select a tone in the tone list
For information about tone group names and the
names of the tones in each group, see the “Tone List”
(page A-1).
Tone List
1.
Press one of the 5Tone Group buttons
below.
The lamp of the button you press will light, and the
name of the tone will appear on the display.
Pressing the button of the tone group that is currently
selected scrolls through the group tones without
leaving the group.
With this method, all of the Digital Piano’s tones are
included in the list, including those not assigned to a
tone group button.
1.
On the home screen (page EN-8), use the
clw and q arrow buttons to select the
tone name you want.
The pointer (X) indicates the name of the currently
selected tone. Pressing a keyboard key plays the
selected tone.
The pointer (X) does not stay in any particular tone
group.
Holding down the clw or q arrow button scrolls
through tone names at high speed.
You can use the clu and i arrow buttons to select
a tone group.
To return to tone number 01 (BERLIN GRAND),
press the clw and q arrow buttons at the same
time.
2.
Press the cmENTER button to apply the
currently selected tone.
The currently selected tone will also be applied
automatically if you do not perform any button
operation for about ten seconds in step 1.
2bk ck cm cn co
3 85 79
bp cl
Selecting and Playing a Tone
To select a tone in a tone group
Tone List/
Lista de tonos
Tone Group/
Grupo de
tonos
No./
Tone Name/
Nombre de tonos
To use the tone list to select a tone
AP700-ES-1B.indd 12 2015/04/06 12:22:56
Playing with Different Tones
EN-11
English
Your Digital Piano comes equipped with three pedals:
damper, soft, and sostenuto
Pedal Functions
Damper Pedal
Pressing the damper pedal while playing will cause the
notes you play to reverberate.
When grand piano is selected as the tone, using this
pedal generates harmonic and other resonance, just
like the damper pedal on an acoustic grand piano.
Half-pedal operation (pressing the pedal part way)
is also supported.
Soft Pedal
Pressing this pedal while playing suppresses notes
played on the keyboard after the pedal was pressed,
and makes them sound softer.
Sostenuto Pedal
Only the notes of the keys that are depressed when this
pedal is pressed are sustained, even if the keyboard
keys are released, until the pedal is released.
If pressing the pedal does not produce the desired
effect, it could mean that the pedal cord is not
connected properly. Refer to step 2 under “To
connect the cables” (page EN-59).
1.
Press the 3SETTING button to display the
setting screen.
2.
Use the clw and q arrow buttons to
select “General” and then press the
cmENTER button.
3.
Use the clw and q arrow buttons to
select “Half Pedal Pos.”.
4.
Use the clu (–) and i (+) arrow buttons to
change the setting value and adjust the half
pedal trigger position.
+1 or greater: Deeper trigger position
–1 or less: Shallower trigger position
The setting range is –2 to +2.
5.
Press the 3SETTING button to exit the
setting screen.
Using the Digital Piano’s
Pedals
Soft pedal Damper pedal
Sostenuto pedal
To adjust the half pedal trigger position
z
H a l f
P e d a l
P o s .
AP700-ES-1B.indd 13 2015/04/06 12:22:57
EN-12
Playing with Different Tones
The tones of your Digital Piano have built-in elements that give them the characteristic reverberation of an acoustic
piano. Each of these elements can be individually adjusted as described below.
Adjusting Acoustic Piano Sound Characteristics
Display Name Description Setting Range
Hammer Response Hammer Response. The size of the hammers that strike the strings in an acoustic
piano changes according to the key range, so the timing of note sounding also
changes with the range. This settings lets you select timing of note sounding.
Default: Optimum setting for currently selected tone.
Off: Fastest response across entire keyboard, regardless of range.
1 to 10: A greater value produces slower timing.
D (Default),
Off (Disabled),
1 to 10
Lid Simulator Lid Simulator. Timbre changes depending on how much the lid of an acoustic piano
is open. You can select one of the lid opening settings described below.
Default: Optimum setting for currently selected tone.
Closed: Lid closed.
Semi (Semi-open): Lid partially open.
Full (Full-open): Lid fully open.
Removed: Lid removed.
D (Default),
Closed,
Semi,
Full,
Removed
Damper Resonance Damper Resonance. Pressing the damper pedal on an acoustic piano opens all 88 of
the strings, causing all of the strings that are harmonics of the strings that are played
to resonate. You can select one of the resonance settings described below.
Default: Optimum setting for currently selected tone.
Off (Disabled), 1 to 10: A larger value increases the effect level.
D (Default),
Off (Disabled),
1 to 10
Damper Noise Damper Noise. Damper noise is a slight metallic ringing sound that is generated as
the damper of an acoustic piano separates from the wires pedal when the damper
pedal is pressed. You can use the settings below to adjust the volume level of
damper noise.
Default: Optimum setting for currently selected tone.
Off (Disabled), 1 to 10: A larger value increases the noise level.
D (Default),
Off (Disabled),
1 to 10
String Resonance String Resonance. Playing on an acoustic piano causes the strings that are harmonics
of the played strings to resonate. You can select one of the resonance settings
described below.
Default: Optimum setting for currently selected tone.
Off (Disabled), 1 to 10: A larger value increases the resonance level.
D (Default),
Off (Disabled),
1 to 10
AP700-ES-1B.indd 14 2015/04/06 12:22:57
Playing with Different Tones
EN-13
English
1.
Press the 3SETTING button to display the
setting screen.
2.
Use the clw and q arrow buttons to
select “Acoustic Simulator” and then press
the cmENTER button.
3.
Use the clw and q arrow buttons to
select the item you want to adjust.
4.
Use the clu (–) and i (+) arrow buttons to
change the setting.
5.
Press the 3SETTING button to exit the
setting screen.
Hall Simulator
Simulates the rich clarity, unconstrained brilliance, and
other acoustic distinctive characteristics of world-
famous concert halls.
Timbre and reverberation change depending on the
position in the concert hall where the listener is
located. Hall Simulator can simulate listening at any
position within the currently selected hall.
Disabling Hall Simulator also disables the Hall
effect.
Chorus
Adds more breadth to your notes.
Brilliance
Effect for adjusting the brilliance of the tone.
1.
Press one of the 7HALL SIMULATOR
buttons to select a hall simulator.
The lamp of the button you press will light.
2.
To turn off the hall simulator, press the same
button you pressed in step 1.
This will cause the lamp of the button to become
unlit.
1.
Press the 3SETTING button to display the
setting screen.
2.
Use the clw and q arrow buttons to
select “Effect” and then press the cmENTER
button.
3.
Use the clw and q arrow buttons to
select “Position”.
4.
Use the clu and i arrow buttons to select
a position.
Player: Position of the performer seated in front of
the piano on the stage of the hall
Listener 1: Position of audience seated at the front of
the hall
Listener 2: Position of audience seated further back
than Listener 1
Listener 3: Position of audience seated further back
than Listener 2
5.
Press the 3SETTING button to exit the
setting screen.
Using Effects
z
A c o u s t i c S i m u l a t o r > E n t
To apply a hall simulator
Number
Hall simulator
Name Description
1 ROOM Room
2 SALON Salon
3 DUTCH
CHURCH
Amsterdam church with
acoustics that are suitable for
music
4 STANDARD
HALL
Standard concert hall
5 BERLIN HALL Berlin arena type classic concert
hall
6 FRENCH
CATHEDRAL
Large gothic cathedral in Paris
To select a listening position
z
P o s i t i o n
AP700-ES-1B.indd 15 2015/04/06 12:22:57
EN-14
Playing with Different Tones
1.
Press the 3SETTING button to display the
setting screen.
2.
Use the clw and q arrow buttons to
select “Effect” and then press the cmENTER
button.
3.
Use the clw and q arrow buttons to
select “Chorus”.
4.
Use the clu and i arrow buttons to select
a chorus name.
5.
Press the 3SETTING button to exit the
setting screen.
1.
Press the coBRILLIANCE button to display
the setting screen.
2.
Use the clu (–) and i (+) arrow buttons to
change the setting.
+1 or higher: Makes the tone brighter.
–1 or lower: Makes the tone darker.
The setting range is –3 to +3.
3.
Press the ckEXIT button to exit the setting
screen.
DSP makes it possible to digitally produce complex
acoustic effects. The DSP is assigned to each tone
whenever you turn on Digital Piano power.
You can split the keyboard in the center for duet play
so the left and right sides have the same ranges.
The left pedal operates as the left side damper pedal,
while the right pedal is the right side damper pedal.
The Duet Mode is the perfect way to conduct lessons,
with the teacher playing on the left side as the student
playing the same song on the right side.
Only the damper pedal for the right side keyboard
supports half-pedal operations.
1.
Specify the number of the tone you want to
use.
See “Selecting and Playing a Tone” on page EN-10 for
information about how to select a tone.
To apply chorus to a tone
Display Setting
Off
Light Chorus
Chorus
Deep Chorus
Flanger
Off (OFF)
Light Chorus
Medium Chorus
Deep Chorus
Flanger (whooshing effect)
To adjust brilliance
About DSP
z
C h o r u s
z
B r i l l i a n c e
Splitting the Keyboard for
Duet Play
C3 C4 C5 C6 C3 C4 C5 C6
Keyboard
Split point
Left keyboard Right keyboard
(middle C)(middle C)
Pedals
Left side damper pedal
Left and right side damper pedal
Right side damper pedal
AP700-ES-1B.indd 16 2015/04/06 12:22:57
Playing with Different Tones
EN-15
English
2.
Each press of the bkDUET button cycles the
duet setting between the settings below.
Turning on layer (page EN-16) automatically exits the
Duet Mode.
Note that Layer (page EN-16), Transpose (page
EN-20), and normal Octave Shift (page EN-22) cannot
be selected while duet is enabled. You can use the
procedure under “To change the octaves of the duet
keyboards” below to change the octaves of the duet
keyboards.
The effects below are not applied while the DUET
PAN lamp is lit.
Acoustic Simulator (except for Hammer Response
and Lid Simulator) (page EN-12)
Hall Simulator (page EN-13)
Chorus (page EN-14)
You can change the ranges of the left and right
keyboards in octave units from their initial default
settings.
1.
Hold down the bkDUET button until the
screen shown below appears.
2.
Use the clw and q arrow buttons to
select a keyboard range.
Upper Octave: Right-side keyboard
Lower Octave: Left-side keyboard
3.
Use the clu (–) and i (+) arrow buttons to
change the octave.
+1 or higher: Raises the octave by the specified value.
–1 or lower: Lowers the octave by the specified value.
0: Returns the octave to its original setting.
The setting range is –2 to +2.
Example: To select “Lower Octave” in step 2 and set
“+1” in step 3
4.
Press the ckEXIT button to exit the setting
screen.
Enabled (Both left and right
keyboard sounds are input from the
left and right speakers.)
Enabled (Left side keyboard play is
output from the left speaker and
right side play is output from the
right speaker. The Duet Pan Mode
effect is applied only while a grand
piano tone is selected.)
Disabled
To change the octaves of the duet
keyboards
z
L o w e r O c t a v e
C4 C5 C6 C7 C3 C4 C5 C
6
Left keyboard Right keyboard
1 octave higher than initial
setting Unchanged
AP700-ES-1B.indd 17 2015/04/06 12:22:57
EN-16
Playing with Different Tones
Use the following procedure to layer two tones, so they
sound at the same time.
1.
Press the cnLAYER button.
2.
Use the clu and i arrow buttons to
display “LAYER”.
3.
Select the main tone.
Use the clw and q arrow buttons to select “U1”
(Upper 1) and then press the cmENTER button.
4.
Select a tone and then press the cmENTER
button.
See “Selecting and Playing a Tone” on page EN-10 for
information about how to select a tone.
5.
Select the layered tone.
Use the clw and q arrow buttons to select “U2”
(Upper 2) and then press the cmENTER button.
6.
Select a tone and then press the cmENTER
button.
7.
Press a keyboard key.
Both tones sound at the same time.
8.
To cancel layering and switch to a single tone
(Upper 1), press the cnLAYER button or
ckEXIT button.
Each press of the cnLAYER button toggles between
unlayered (one tone) and layered (two tones).
Two tone output is enabled while the cnLAYER
button lamp is lit.
Entering the Duet Mode (page EN-14) or Duet Pan
Mode will disable layering.
Configuring of layering settings is not supported by
MIDI Recorder Track 2 recording.
1.
Hold down the cnLAYER button until the
screen shown below appears.
2.
Use the clw and q arrow buttons to
select “Layer Balance”.
3.
Use the clu (–) and i (+) arrow buttons to
adjust the layer volume balance.
–1 or lower: Increases the Upper 1 tone volume.
+1 or higher: Increases the Upper 2 tone volume.
0: Upper 1 and Upper 2 volume the same.
The setting range is –24 to +24.
4.
To return to the screen you were at prior to
step 1 of this procedure, press ckEXIT
button.
Layering Two Tones
X
U 1
X
U 2
To adjust the volume balance between
two layered tones
z
L a y e r B a l a n c e
AP700-ES-1B.indd 18 2015/04/06 12:22:57
Playing with Different Tones
EN-17
English
You can use the procedure below to change the octave
of each layer.
1.
Hold down the cnLAYER button until the
screen shown below appears.
2.
Use the clw and q arrow buttons to
select the layer whose octave you want to
change.
Upper 1: Select “Upper1 Octave”
Upper 2: Select “Upper2 Octave”.
3.
Use the clu (–) and i (+) arrow buttons to
change the octave.
+1 or higher: Raises the octave by the specified value.
–1 or lower: Lowers the octave by the specified value.
0: Returns the octave to its original setting.
The setting range is –2 to +2.
4.
To return to the screen you were at prior to
step 1 of this procedure, press ckEXIT
button.
You can use the procedure below to assign different
tones to the right range and left range of the keyboard,
so it sounds like you are playing an ensemble between
two instruments.
If you turn on both layer and split, layering will be
applied to the right side range of the keyboard only.
Use of the Duet Mode (page EN-14) is recommended
to divide the keyboard in the center between a left
keyboard and right keyboard of identical ranges.
1.
Press the cnLAYER button.
2.
Use the clu and i buttons to display
“SPLIT”.
To use both keyboard split and keyboard layering,
display “LAYER&SPLIT”.
3.
Select a tone for the left keyboard.
Use the clw and q arrow buttons to select “L”
(Lower) and then press the cmENTER button.
4.
Select a tone and then press the cmENTER
button.
See “Selecting and Playing a Tone” on page EN-10 for
information about how to select a tone.
To change the octave of each layer Splitting the Keyboard
between Two Different Tones
F#3
Acoustic Bass Berlin Grand
Split point
X
L
AP700-ES-1B.indd 19 2015/04/06 12:22:58
EN-18
Playing with Different Tones
5.
Select the tone for the right side range.
Use the clw and q arrow buttons to select “U1”
and then press the cmENTER button.
6.
Select a tone and then press the cmENTER
button.
If you want to use layering for the right keyboard
(page EN-16), repeat steps 5 and 6 to select the “U2”
(Upper 2) tone.
7.
Press a keyboard key.
This will sound the tones assigned to the left and
right side ranges of the keyboard.
8.
To cancel the split keyboard and switch to a
single tone (Upper 1), press the cnLAYER
button or ckEXIT button.
Each press of the cnLAYER button toggles between
unlayered (one tone) and layered (two tones).
Two tone output is enabled while the cnLAYER
button lamp is lit.
1.
Hold down the cnLAYER button until the
screen shown below appears.
2.
Use the clw and q arrow buttons to
select an item.
3.
Use the clu (–) and i (+) arrow buttons to
change the setting.
4.
To return to the screen you were at prior to
step 1 of this procedure, press ckEXIT
button.
To modify split settings
Display
Name Description Setting
Range
Lower
Octave
Lower Octave. Changes the octave
of the left (Lower) side of a split
keyboard in one-octave units.
A value that is 1 or higher raises
by the specified number of
octaves, while a value that is –1 or
lower lowers by the specified
number of octaves.
–2 to +2
Lower
Volume
Lower Volume. Adjusts the
volume level of the left (Lower)
side of a split keyboard.
0 to 127
Split
Point
Split Point. Specifies the left/right
keyboard split point. The initial
default split point is F#3.
A0 to C8
Lower
Pedal
Lower Pedal. Enables (On) or
disables (Off) damper pedal
operation for the tone of the left
(Lower) side of a split keyboard.
On
(Enabled),
Off
(Disabled)
AP700-ES-1B.indd 20 2015/04/06 12:22:58
Playing with Different Tones
EN-19
English
The metronome lets you play and practice along with a
steady beat to help keep you on tempo.
1.
Press 8METRONOME button.
This starts the metronome.
This causes the button lamp to light.
This will cause the bpX/k button lamps to flash in
time with the currently set tempo. The bpX/k
button left lamp flashes on the first beat of each
measure, while the right lamp flashes on the
remaining beats of the measure.
2.
Press 8METRONOME button again to stop
the metronome.
This will cause the 8METRONOME button and
bpX/k button lamps to become unlit.
1.
Use the 9TEMPOw (–) and q (+) buttons
to set the tempo you want.
Press the 9w and q arrow buttons at the same
time to set the tempo of last selected Concert Play/
Music Library song. If a recording function is being
used, this operation sets a tempo of 120.
The setting range is 20 to 255.
Changing the metronome speed (tempo) also
changes the playback tempo of Music Library songs
and MIDI Recorder songs.
1.
Hold down the 8METRONOME button until
the screen shown below appears.
2.
Use the clw and q arrow buttons to one
of the items below.
3.
Use the clu (–) and i (+) arrow buttons to
change the setting.
4.
Press the ckEXIT button to exit the setting
screen.
Using the Metronome
To start and stop
To adjust the tempo
Flash
To configure metronome settings
Display
Name Description Setting
Range
Beat Beat. Specifies the beat setting. The
first beat of each measure is a bell
sound, while the remaining beats are
clicks.
A Beat setting of “0” plays a straight
click, without a bell sound.
0 to 9
Volume Volume. Adjusts the metronome
volume.
0 to 127
Volume
Beat
AP700-ES-1B.indd 21 2015/04/06 12:22:58
EN-20
Playing with Different Tones
Touch Response alters tone volume in accordance with
keyboard pressure (speed). This provides you some of
the same expressivity you get on an acoustic piano.
Use the procedure below to control how much the
volume of played notes change in accordance with
playing speed. Select the setting that best matches your
playing style.
1.
Press the 3SETTING button to display the
setting screen.
2.
Use the clw and q arrow buttons to
select “Keyboard” and then press the
cmENTER button.
3.
Use the clw and q arrow buttons to
select “Touch Response”.
4.
Use the clu and i arrow buttons to select
one of the settings below for touch response.
5.
Press the 3SETTING button to exit the
setting screen.
The transpose feature lets you change the pitch, in
semitone steps. A simple operation lets you instantly
change the pitch to match that of a singer.
The transpose setting range is –12 to +12 semitones.
1.
Press the 3SETTING button to display the
setting screen.
2.
Use the clw and q arrow buttons to
select “Keyboard” and then press the
cmENTER button.
3.
Use the clw and q arrow buttons to
select “Transpose”.
4.
Use the clu (–) and i (+) arrow buttons to
set the transpose key.
5.
Press the 3SETTING button to exit the
setting screen.
Changing Keyboard Response
to Touch Pressure
(Touch Response)
Pressing fast produces
louder notes.
Pressing slowly produces
softer notes.
Do not try to use too
much pressure.
To change touch response sensitivity
z
K e y b o a r d > E n t
z
T o u c h R e s p o n s e
Disabled (Off)
Touch Response disabled. Sound
volume is fixed, regardless of key press
speed.
Light (Light) More sensitive Touch Response than
Normal.
Normal (Normal) Normal Touch Response.
Heavy (Heavy) This setting makes it easier to output
smaller sound than Normal.
Changing the Pitch
(Transpose, Tuning, Octave
Shift)
To change the pitch in semitone steps
(Transpose)
z
T r a n s p o s e
AP700-ES-1B.indd 22 2015/04/06 12:22:58
Playing with Different Tones
EN-21
English
Use the tuning feature when you need to adjust the
pitch slightly to play along with another musical
instrument. Also, some artists perform their music
with slightly altered tuning. You can use the tuning
feature to adjust tuning so it exactly matches a
performance on a CD.
The tuning feature specifies the frequency of the A4
note. You can set a frequency within the range of
415.5 to 465.9 Hz. The initial default setting is
440.0 Hz.
Some CD performances are recorded with
instruments that are tuned slightly different from
standard.
1.
Press the 3SETTING button to display the
setting screen.
2.
Use the clw and q arrow buttons to
select “Keyboard” and then press the
cmENTER button.
3.
Use the clw and q arrow buttons to
select “Tuning”.
4.
Use the clu (–) and i (+) arrow buttons to
fine adjust the tuning.
The setting can be adjusted in units of 0.1 Hz.
5.
Press the 3SETTING button to exit the
setting screen.
Generally, a piano is tuned so high notes are sharper
and low notes are flatter. This type of tuning is called
“stretch tuning”.
Your Digital Piano lets you change how its stretch
tuning is applied. You can also disable Stretch Tuning,
if you want.
1.
Press the 3SETTING button to display the
setting screen.
2.
Use the clw and q arrow buttons to
select “Keyboard” and then press the
cmENTER button.
3.
Use the clw and q arrow buttons to
select “Stretch Tune”.
4.
Use the clu and i arrow buttons to select
one of the stretch tunings described below.
5.
Press the 3SETTING button to exit the
setting screen.
Fine Tuning (Tuning)
z
T u n i n g
To change the tuning curve
(Stretch Tuning)
Display
Name Description
Default Initial factory default setting (Default). Use of
this setting is recommended because it applies
the optimum stretch tuning for the currently
selected tone.
Upper1 Applies the optimum stretch tuning for the tone
that is currently selected for Upper 1 (Upper1).
Upper 1 stretch tuning is also applied to the
Upper 2 and Lower tones. Use of this setting is
recommended when you want to minimize
differences in the pitch between keyboard layer
and split tones.
Off Disabled (Off). Disables Stretch Tuning.
Piano1 BERLIN GRAND stretch tuning. Applies initial
factory default BERLIN GRAND stretch tuning
to other tones as well.
Piano2 HAMBURG GRAND stretch tuning.
Piano3 VIENNA GRAND stretch tuning.
E.Piano1 Electric Piano 1 (E.Piano1) stretch tuning.
E.Piano2 Electric Piano 2 (E.Piano2) stretch tuning.
z
S t r e t c h T u n e
AP700-ES-1B.indd 23 2015/04/06 12:22:58
EN-22
Playing with Different Tones
Octave Shift lets you raise or lower the pitch of the
keyboard notes in octave units.
The octave shift setting range is –2 to +2 octaves.
For information about changing the split function
octave, see “To modify split settings” on page
EN-18.
1.
Press the 3SETTING button to display the
setting screen.
2.
Use the clw and q arrow buttons to
select “Keyboard” and then press the
cmENTER button.
3.
Use the clw and q arrow buttons to
select “Octave Shift”.
4.
Use the clu (–) and i (+) arrow buttons to
change the octave.
5.
Press the 3SETTING button to exit the
setting screen.
You can use the following procedure to select from
among 17 preset temperaments, including the standard
Equal Temperament.
1.
Press the 3SETTING button to display the
setting screen.
2.
Use the clw and q arrow buttons to
select “Keyboard” and then press the
cmENTER button.
3.
Use the clw and q arrow buttons to
select “Temper. Type”.
4.
Use the clu and i arrow buttons to select
a temperament name.
5.
Press the clw arrow button to select
“Temper. Base Note”.
6.
Use the clu and i arrow buttons to select
the root key of the selected temperament.
7.
Press the 3SETTING button to exit the
setting screen.
Octave Shift
z
O c t a v e S h i f t
Changing the Temperament of
the Keyboard
No. Temperament name Display
00 Equal Temperament Equal
01 Pure Major Pure Major
02 Pure Minor Pure Minor
03 Pythagorean Pythagorean
04 Kirnberger 3 Kirnberger 3
05 Werckmeister Werckmeister
06 Mean-Tone Mean-Tone
07 Rast Rast
08 Bayati Bayati
09 Hijaz Hijaz
10 Saba Saba
11 Dashti Dashti
12 Chahargah Chahargah
13 Segah Segah
14 Gurjari Todi Gurjari Todi
15 Chandrakauns Chandrakauns
16 Charukeshi Charukeshi
z
T e m p e r . T y p e
AP700-ES-1B.indd 24 2015/04/06 12:22:58
EN-23
English
Using Built-in Songs (Concert Play, Music Library)
Your Digital Piano comes with 15 built-in piano and
orchestra tunes (Concert Play 1 through 15), and 60
piano solos (Music Library 1 to 60).
Concert Play lets you enjoy playing along with
orchestral accompaniment. You can use Music Library
to practice famous piano pieces.
After you select a built-in song, it can take a number
of seconds for the song data to be loaded. While the
data is being loaded, the keyboard keys and button
operations will be disabled. If you are playing
something on the keyboard, the following operation
will cause output to stop.
Concert Play has recordings of a live orchestra, which
you can use to play along with authentic
accompaniment.
Step 1: LISTEN
Listen to playback of the piano and orchestra to
familiarize yourself with the music.
Step 2: PLAY
Play along with the orchestra accompaniment.
The Concert Play includes 15 songs, numbered 1
through 15.
A song on a USB flash drive (Concert Play song data
obtained with a computer, etc.) plugged into the
Digital Piano’s USB port can be used as Concert Play
song.
You can play back at a slow tempo (80% of the
original).
Use of the Digital Piano’s metronome is not
supported during Concert Play.
The Concert Play contains actual recordings of an
orchestra. Because of this, the instrument sounds are
different from the tones that can be selected with this
piano (page EN-10).
Due to conditions when a live recording was made,
playback may include the sound of the performer’s
breathing, performance noise, or other noise.
1.
Press the brCONCERT PLAY button.
2.
Use the clw and q arrow buttons to
select a song and then press the cmENTER
button.
For a list of songs, see the “Concert Play List” (page
A-2).
You can use the clu and i arrow buttons to scroll
through the song list pages.
3.
Use the brCONCERT PLAY button to enter
the Listen Mode (“LISTEN”).
Each press of the CONCERT PLAY button toggles
between modes as shown below.
bp br bs bt ck cm
8
cl
Concert Play
To listen to a Concert Play Song (Listen
Mode)
Listen (LISTEN) Play (PLAY)
Mode
Song name
Playback time
AP700-ES-1B.indd 25 2015/04/06 12:22:59
EN-24
Using Built-in Songs (Concert Play, Music Library)
4.
If you want to play back at a slower tempo
(80%), press the 8METRONOME button so
“SLOW” is displayed.
To return to the original tempo, press the
8METRONOME button again to clear “SLOW”
from the display.
5.
Press the bpX/k button to start playback.
For details about playback, see “Starting and
Stopping Playback” in “Operations Common to All
Modes” (page EN-8).
For details about how to return to the home screen,
see “About the Home Screen” (page EN-8).
You can adjust playback volume as required. For
details to adjust the volume level, see “To adjust the
playback volume level of a Concert Play song” on
page EN-25.
1.
Perform steps 1 and 2 of the procedure under
“To listen to a Concert Play Song (Listen
Mode)” (page EN-23) to select a song.
2.
Use the brCONCERT PLAY button to enter
the Play Mode.
3.
If you want to play back at a slower tempo
(80%), press the 8METRONOME button so
“SLOW” is displayed.
To return to the original tempo, press the
8METRONOME button again to clear “SLOW”
from the display.
4.
Press the bpX/k button to start playback.
For details about playback, see “Starting and
Stopping Playback” in “Operations Common to All
Modes” (page EN-8).
With some songs, the play-along part (the part you
will play on the Digital Piano) may be slightly
audible during Play Mode playback.
5.
Play the play-along part on the Digital Piano.
For details about how to return to the home screen,
see “About the Home Screen” (page EN-8).
SLOW
To play along with an orchestra using
Concert Play (Play Mode)
Mode
Song name
AP700-ES-1B.indd 26 2015/04/06 12:22:59
Using Built-in Songs (Concert Play, Music Library)
EN-25
English
1.
Press the btVOLUME button.
2.
Use the clu (–) and i (+) arrow buttons to
adjust the volume.
The setting range is 0 to 127.
3.
Press the ckEXIT button to exit the setting
screen.
You can use a USB flash drive to play back Concert
Play songs obtained with a computer, etc. on the
Digital Piano.
For details, visit the website below.
http://world.casio.com/
PREPARATION
To use a USB flash drive, you first need to format it
on the Digital Piano. See “Preparing a USB Flash
Drive” on page EN-45 for more information.
1.
Connect the USB flash drive to your
computer.
2.
Copy the Concert Play files (both the .LSN
and .PLY files) from your computer to the CP
folder on the USB flash drive.
1.
Insert the USB flash drive into the Digital
Piano’s USB flash drive port.
2.
Press the brCONCERT PLAY button.
3.
Press the cli arrow button. This will cause
“USB” to appear in the upper right corner of
the screen.
The message “No Media” will appear on the display
if there is no USB flash drive plugged into the Digital
Piano.
To return to the Digital Piano memory contents, press
the clu arrow button.
4.
Use the clw and q arrow buttons to
select a song and then press the cmENTER
button.
To find out what you need to do next, see the pages
below.
From step 3 under “To listen to a Concert Play Song
(Listen Mode)”, page EN-23
From step 2 under “To play along with an orchestra
using Concert Play (Play Mode)”, page EN-24
For details about how to return to the home screen,
see “About the Home Screen” (page EN-8).
You can use the Music Library for your listening
enjoyment or to practice piano songs.
The Music Library includes 60 songs, numbered 1
through 60.
You can also import up to 10 songs (page EN-50
“Loading USB Flash Drive Data into Digital Piano
Memory”) from a USB flash drive to Digital Piano
memory, and assign them Music Library song
numbers 61 through 70. Any song number that
already contains imported data will be indicated by
an asterisk (*) between the song name and number.
To adjust the playback volume level of a
Concert Play song
Concert Play Songs Obtained
with a Computer, etc.
To save Concert Play songs obtained with
a computer, etc. to a USB flash drive
To play back Concert Play songs obtained
with a computer, etc.
Music Library
AP700-ES-1B.indd 27 2015/04/06 12:22:59
EN-26
Using Built-in Songs (Concert Play, Music Library)
1.
Press the bsSONG button.
2.
Use the clu and i arrow buttons to select
“MUSIC LIB”.
3.
Use the clw and q arrow buttons to
select a song and then press the cmENTER
button.
For a list of songs, see the “Music Library List” (page
A-3).
You can use the clu and i arrow buttons to scroll
through the song list pages.
4.
Press the bpX/k button to start playback.
For details about playback, see “Starting and
Stopping Playback” in “Operations Common to All
Modes” (page EN-8).
For details about how to return to the home screen,
see “About the Home Screen” (page EN-8).
The settings below can be configured for playback.
Song volume level: To adjust the playback volume
level of a MIDI Recorder song (page EN-34)
Tempo: To adjust the tempo (page EN-19)
You can turn off the left hand part or right hand part of
a song and play along on the Digital Piano.
The Music Library includes a number of duets.
While a duet is selected, you can turn off the first
piano (Primo) or second piano (Secondo) tone and
play along with the song.
PREPARATION
Select the song you want to practice and adjust the
tempo. See “To adjust the tempo” (page EN-19).
A number of tunes have tempo changes part way
through in order to produce specific musical effects.
1.
Use the bsSONG button to select the part
you want to play back (the sound you don’t
want to mute).
Each press of bsSONG button cycles through the
settings shown below.
L: Plays the left-hand part and mutes the right-hand
part.
R: Plays the right-hand part and mutes the left-hand
part.
L R: Plays both the left-hand and right-hand parts.
2.
Press the bpX/k button to start playback.
For details about playback, see “Starting and
Stopping Playback” in “Operations Common to All
Modes” (page EN-8).
3.
Play the missing part on the keyboard.
For details about how to return to the home screen,
see “About the Home Screen” (page EN-8).
To play back a specific music library song
Song name
Current measure Song tempo
To practice with a music library song
Part on
AP700-ES-1B.indd 28 2015/04/06 12:22:59
Using Built-in Songs (Concert Play, Music Library)
EN-27
English
You can use your Digital Piano to play back audio
files*1 and MIDI files*2 stored on a commercially
available USB flash drive.
See “USB Flash Drive” on page EN-44 for more
information.
*1 WAV format (Linear PCM, 16bit, 44.1 kHz, Stereo)
*2 Standard MIDI files (SMF format 0/1), MIDI
Recorder song files (CSR format), CASIO MIDI files
(CM2 format)
PREPARATION
Prepare a USB flash drive that contains data
recorded to it using the Digital Piano’s Audio
Recorder. See “Audio Recorder (Recording to a USB
Flash Drive)” on page EN-35 for more information.
You can also use a computer to save song data to the
USB Flash Drive for playback. See “Saving Standard
Song Data to a USB Flash Drive” on page EN-48 for
more information.
Insert the USB flash drive that contains the data you
want to play back into your Digital Piano’s USB
flash drive port.
Never remove the USB flash drive while song data
stored on it is being accessed by the Digital Piano.
Doing so can corrupt the data on the USB flash drive
and damage the USB flash drive port.
1.
Press the bsSONG button.
2.
Use the clu and i buttons to select the
song data type you want.
MIDI file: SMF
Audio file: AUDIO PLAY
3.
Use the clw and q arrow buttons to
select a song and then press the cmENTER
button.
You can use the clu and i arrow buttons to scroll
through the song list pages.
4.
Press the bpX/k button to start playback.
For details about playback, see “Starting and
Stopping Playback” in “Operations Common to All
Modes” (page EN-8).
For details about how to return to the home screen,
see “About the Home Screen” (page EN-8).
1.
Press the btVOLUME button.
2.
Use the clw and q buttons to select the
song data type you want.
MIDI file: MIDI Volume
Audio file: Audio Volume
3.
Use the clu (–) and i (+) arrow buttons to
adjust the volume.
The setting range is 0 to 127.
4.
Press the ckEXIT button to exit the setting
screen.
Playing Back Song Data
Stored on a USB Flash Drive
To adjust the playback volume level of
song data
AP700-ES-1B.indd 29 2015/04/06 12:22:59
EN-28
Demo Song
All of the Digital Piano’s built-in songs can be played
back for your listening enjoyment.
Grand Piano demo songs: 6
Concert Play songs: 15
Music Library songs: 60
After you select a built-in song, it can take a number
of seconds for the song data to be loaded. While the
data is being loaded, the keyboard keys and button
operations will be disabled. If you are playing
something on the keyboard, the following operation
will cause output to stop.
1.
Press the brCONCERT PLAY button and
bsSONG button at the same time.
This starts playback from Grand Piano demo song 1.
While a demo song is playing, the boY button lamps
flash.
You can play along with a demo songs on the
keyboard.
2.
To change to another song, use the clw
and q arrow buttons to select a song name
and then press the cmENTER button.
This starts demo play.
You can use the clu and i arrow keys to scroll
through song groups in the following sequence:
Grand Piano demo songs 3 Concert Play songs 3
Music Library songs. Selecting a different song group
causes song 1 of the group to be selected.
For information about the songs in each group, see
the song lists on page A-2.
You can also switch to a Grand Piano group song
while demo play is in progress. Press one of the
following buttons to select the grand piano tone you
want: 5BERLIN GRAND, HAMBURG GRAND,
VIENNA GRAND.
3.
To stop demo play, press the boY button or
the ckEXIT button.
The tune selection and playback stop operations
described above are the only operations that are
possible during demo song play.
br bs ck cm
5
cl
bo
Performing Demo Play
AP700-ES-1B.indd 30 2015/04/06 12:23:00
Demo Song
EN-29
English
A simple operation lets you play demo songs that
highlight the particular characteristics of each of the
following grand piano tones so you can hear the
difference between them: BERLIN GRAND,
HAMBURG GRAND, VIENNA GRAND.
1.
Hold down the button of the tone whose
demo song you want to hear (5BERLIN
GRAND, HAMBURG GRAND, or VIENNA
GRAND) until the first demo tune assigned to
the tone starts to play.
There is a total of six grand piano demo songs, two
for each of the grand piano tones (BERLIN GRAND,
HAMBURG GRAND, and VIENNA GRAND). When
you start playback, the two songs are played in a
loop, one after the other. For a list of songs, see the
“Grand Piano Demo Song List” (page A-3).
To change to a different demo song or to stop demo
song play, perform steps 2 through 3 under
“Performing Demo Play” (page EN-28).
Comparing Grand Piano
Tones
AP700-ES-1B.indd 31 2015/04/06 12:23:00
EN-30
Recording and Playback
Your Digital Piano can record what you play on the keyboard and play it back when you want. The Digital Piano
has two recording functions: a MIDI Recorder and an Audio Recorder. Select the function that suits the needs for the
type of recording you want to make.
CASIO COMPUTER CO., LTD. takes no responsibility for any damages, lost profits, or claims by third parties
arising from the deletion of recorded data due to malfunction, repair, or for any other reason.
Recording Features
MIDI Recorder Audio Recorder
Keyboard performance information is recorded to Digital
Piano memory as MIDI data* to two tracks (storage areas for
keyboard performance data).
Keyboard performance information is recorded to a USB flash
drive as audio data.
Keyboard performance information (keyboard keys press/
release, touch pressure, etc.) is recorded as MIDI data.
The size of MIDI data is much smaller when compared with
audio data, making it easier to edit later on a computer, etc.
Supported recording capacity: Up to 5,000 notes (total of
tracks 1 and 2), one file only
Like a portable music player or tape recorder, notes are
recorded as audio data.
Audio data files are much larger compared to MIDI data
files. The advantage of audio data files is that they can be
easily played back on a computer, portable music player,
etc.
Supported recording capacity: Up to 99 files, each file up to
a maximum length of 25 minutes
bo bp bq bs bt ck cm cp
8
cl
MIDI
USB
What you can do...
Record to one track while playing back from the other track
Track 1 Keyboard play
3
While playing
back...
Track 2 Keyboard play
What you can do...
Record performance while playing back a song recorded
with the MIDI Recorder
MIDI Recorder
song playback +Keyboard play 3Record
AP700-ES-1B.indd 32 2015/04/06 12:23:00
Recording and Playback
EN-31
English
Playback Features
*MIDI
MIDI is short for “Musical Instrument Digital Interface”. It is a universal standard that makes it possible for
musical instruments, computers, and other devices to exchange performance information (keyboard key press/
release, touch pressure, etc.) regardless of manufacturer. Performance data in this case is called “MIDI data”.
For details about the file formats of data supported by this Digital Piano, see “Data Types Supported by the
Digital Piano” (page EN-46).
MIDI Recorder Audio Recorder
Plays back Track 1 and Track 2 (simultaneously or
individually).
With the MIDI Recorder, the Digital Piano automatically
performs playback using its internal sound source in
accordance with the performance information recorded as
MIDI data.
You can play back audio data from a USB flash drive.
The Audio Recorder plays back the waveform of sound
recorded as audio data.
What you can do...
Play on the keyboard along with playback of Tracks 1 and 2
Track 1 3While playing back...
Track 2 3While playing back...
Keyboard play
After recording, change the tempo of Track 1
For example, you can record at a slow tempo and then play
back at a faster tempo.
The tempo set for Track 1 is applied to Track 2.
What you can do...
Play along on the keyboard while the audio data is playing
Playback of a song on a
USB flash drive +Keyboard play
AP700-ES-1B.indd 33 2015/04/06 12:23:00
EN-32
Recording and Playback
After recording to either of the tracks of a song, you can
record to the other track while listening to playback
what you recorded in the first track.
The items below are reflected in contents when
recording to the tracks.
Keyboard play and pedal operations
Tone setting
Tempo setting
Beat setting
Layer setting (Track 1 only)
Split setting (Track 1 only)
Duet Mode (Track 1 only)
Effects (Track 1 only)
Acoustic Simulator (Track 1 only)
Temperament setting (Track 1 only)
Stretch Tuning setting (Track 1 only)
Recording stops automatically if the number of
notes in memory exceeds the maximum.
Starting a new recording deletes any data that was
previously recorded in memory.
Should power fail during recording, all of the data in
the track you are recording will be deleted.
You can configure the Digital Piano to sound a count
before the start of recording (Precount). For details
about how to configure precount settings, see “To
configure precount settings” (page EN-33).
PREPARATION
Select the tone and effects (Track 1 only) you want to
use in your recording.
Tone (page EN-10)
Effects (page EN-13)
If you want the metronome to sound while you are
recording, configure the beat and tempo settings,
and then press the 8METRONOME button. See
“Using the Metronome” on page EN-19 for more
information.
1.
Press the bqREC button.
“Rec Wait...” appears on the display indicating
record standby.
2.
Use the clu and i arrow buttons to select
“MIDI REC”.
3.
Use the bqREC button to select a track for
recording.
L: Track 1
R: Track 2
4.
Press the bpX/k button to start recording.
You can also start recording by simply playing
something on the keyboard.
5.
To stop recording, press the boY button.
This displays “Rec Song” to indicate that the
recorded song is in playback standby.
To play back the track you just recorded, press the
bpX/k button.
MIDI Recorder (Recording to
Digital Piano Memory)
To record to a specific song track
M I D I R E C
AP700-ES-1B.indd 34 2015/04/06 12:23:00
Recording and Playback
EN-33
English
You can listen to playback of the track you recorded as
you record to the other track.
PREPARATION
Select the tone and effects (Track 1 only) you want to
use in your recording.
Tone (page EN-10)
Effects (page EN-13)
If you want the metronome to sound while you are
recording, configure the beat and tempo settings,
and then press the 8METRONOME button. See
“Using the Metronome” on page EN-19 for more
information.
1.
Hold down the bqREC button until the setting
screen shown below appears.
2.
Use the clw and q arrow buttons to
select “Recorded Part”.
3.
Use the clu and i arrow buttons to
enable (Play) or disable (Mute) of the
recorded track.
4.
Press the bqREC button.
“Rec Wait...” appears on the display indicating
record standby.
5.
Use the clu and i arrow buttons to select
“MIDI REC”.
6.
Use the bqREC button to select a track for
recording.
L: Track 1
R: Track 2
“L” and “R” indicate status information about the left
and right tracks as described below.
If you selected “Play” in step 3, above:
Flashing: Track to be recorded.
Lit: Track to be played back.
If you selected “Mute” in step 3, above:
Flashing: Track to be recorded.
Unlit: Track to be muted.
7.
Press the bpX/k button or play something
on the keyboard.
This will start both playback of the recorded track
and recording to the other track.
8.
To stop recording, press the boY button.
1.
Hold down the bqREC button until the setting
screen shown below appears.
2.
Use the clw and q arrow buttons to
select “Precount”.
3.
Use the clu and i arrow buttons to
enable (On) or disable (Off) the precount.
4.
Press the ckEXIT button to exit the setting
screen.
To record the other track of a song
z
R e c o r d e d P a r t
To configure precount settings
AP700-ES-1B.indd 35 2015/04/06 12:23:01
EN-34
Recording and Playback
1.
Press the bsSONG button.
2.
Use the clu and i arrow buttons to select
“MIDI PLAY”.
3.
Use the bsSONG button to select the track
you want to play back.
Each press of bsSONG button cycles through the
settings shown below.
L: Track 1
R: Track 2
L R: Track 1 and Track 2
4.
Press the bpX/k button to start playback.
For details about playback, see “Starting and
Stopping Playback” in “Operations Common to All
Modes” (page EN-8).
You can change tempo, effect, and other settings
during playback.
1.
Press the btVOLUME button.
2.
Use the clu (–) and i (+) arrow buttons to
adjust the volume.
The setting range is 0 to 127.
3.
Press the ckEXIT button to exit the setting
screen.
The following procedure deletes a specific track of a
song.
The procedure below deletes all of the data of the
selected track. Note that the delete operation cannot
be undone. Check to make sure you really do not
need the data in Digital Piano memory before you
perform the following steps.
1.
Hold down the bqREC button until the setting
screen shown below appears.
2.
Use the clw and q arrow buttons to
select “Part Clear” and then press the
cmENTER button.
3.
Use the clu and i arrow buttons to select
the track to which you want to delete and then
press the cmENTER button.
L: Track 1
R: Track 2
This will cause the confirmation message “Sure?” to
appear.
To play back from Digital Piano memory
M I D I P L A Y
To adjust the playback volume level of a
MIDI Recorder song
To delete recorded data
z
P a r t C l e a r
AP700-ES-1B.indd 36 2015/04/06 12:23:01
Recording and Playback
EN-35
English
4.
Press the cli arrow button to execute the
delete operation.
To cancel the delete operation, press the clu arrow
button.
The message “Please Wait...” will remain on the
display while the operation is being performed. Do
not perform any operation while this message is on
the display. “Complete!” appears on the display after
the operation is complete.
Anything played on the Digital Piano is recorded to the
USB flash drive as audio data (WAV files*). If you play
along on the Digital Piano as you play back data stored
in Digital Piano memory, the memory playback and
your keyboard play are both recorded to USB flash
drive.
*Linear PCM, 16bit, 44.1 kHz, Stereo
Each new recording of audio data to a USB flash
drive is automatically assigned a new file name, so
existing data is not overwritten.
Concert Play song playback tones cannot be
recorded to a USB flash drive by Audio Recorder.
Never remove the USB flash drive while Audio
Recorder recording or playback is in progress. Doing
so can corrupt the data on the USB flash drive and
damage the USB flash drive port.
PREPARATION
Be sure to format the USB flash drive on the Digital
Piano before using it. See “USB Flash Drive” on page
EN-44 for more information.
1.
Insert the USB flash drive into the Digital
Piano’s USB flash drive port.
When you plug in a USB flash drive, the Digital Piano
initially needs to “mount” the USB flash drive and
prepare for data exchange. Note that Digital Piano
operations are momentarily disabled while a USB
flash drive mounting sequence is being performed,
which is indicated by the cpUSB button lamp
flashing. The lamp will stop flashing and remain lit
after mounting is complete. It may take up to 10 or 20
seconds or even longer for a USB flash drive to be
mounted. Do not attempt to perform any operation
on the Digital Piano while a mounting sequence is in
progress. A USB flash drive needs to be mounted
each time it is connected to the Digital Piano.
2.
Press the bqREC button.
“Rec Wait...” appears on the display indicating
record standby.
3.
Use the clu and i arrow buttons to select
“AUDIO REC”.
4.
Press the bpX/k button to start recording.
You can also start recording by simply playing
something on the keyboard.
5.
To stop recording, press the boY button.
Data recorded with Audio Recorder is stored as
WAV files on the USB flash drive. Files are
automatically assigned names in sequence from
“TAKE01.WAV” through “TAKE99.WAV”.
If you want to continue recording, perform the
operations from step 2 of this procedure. To play
back something immediately after you record it,
press the bpX/k button.
Audio Recorder (Recording to
a USB Flash Drive)
To record keyboard play to a USB flash
drive
AP700-ES-1B.indd 37 2015/04/06 12:23:01
EN-36
Recording and Playback
For song data, you can play back the last Music
Library you played back.
1.
Hold down the bqREC button until the setting
screen shown below appears.
2.
Use the clw and q arrow buttons to
select “Audio Rec with MIDI”.
3.
Use the clu and i arrow buttons to select
the type of song you want to play.
MIDI PLAY: MIDI Recorder
MUSIC LIB: Music Library
If you do not want to play anything, select “Off”.
4.
Press the bqREC button.
“Rec Wait...” appears on the display indicating
record standby.
5.
Use the clu and i arrow buttons to select
“AUDIO REC”.
6.
Press the bpX/k button.
This starts playback and recording. Play along on the
keyboard.
7.
To stop recording, press the boY button.
If you want to continue recording, perform the
operations from step 4 under “To record keyboard
play to a USB flash drive” (page EN-35). To play back
something immediately after you record it, press the
bpX/k button.
Use the steps below to play back the last song you
recorded.
For information about selecting a file for playback
see “Playing Back Song Data Stored on a USB Flash
Drive” (page EN-27).
The playback tempo of an audio file cannot be
changed.
1.
Press the bsSONG button.
2.
Use the clu and i arrow buttons to select
“AUDIO PLAY”.
3.
Press the bpX/k button to start playback.
For details about playback, see “Starting and
Stopping Playback” in “Operations Common to All
Modes” (page EN-8).
1.
Press the btVOLUME button.
2.
Use the clw and q arrow buttons to
select “Audio Volume”.
3.
Use the clu (–) and i (+) arrow buttons to
adjust the volume.
The setting range is 0 to 127.
4.
Press the ckEXIT button to exit the setting
screen.
To record keyboard play while playing
back a MIDI Recorder song or song data
z
A u d i o R e c w i t h M I D I
A U D I O R E C
To play back data recorded on a USB flash
drive
To adjust the Audio Recorder volume
level
AP700-ES-1B.indd 38 2015/04/06 12:23:01
Recording and Playback
EN-37
English
The procedure below deletes all of the data of the
selected file. Note that the delete operation cannot
be undone. Check to make sure you really do not
need the data in Digital Piano memory before you
perform the following steps.
1.
Hold down the bsSONG button until the
setting screen shown below appears.
2.
Use the clw and q arrow buttons to
select “Audio Delete” and then press the
cmENTER button.
3.
Press the cli arrow button to execute the
delete operation.
To cancel the delete operation, press the clu arrow
button.
The message “Please Wait...” will remain on the
display while the operation is being performed. Do
not perform any operation while this message is on
the display. “Complete!” appears on the display after
the operation is complete.
To delete the currently selected Audio
Recorder song data
AP700-ES-1B.indd 39 2015/04/06 12:23:01
EN-38
Configuring Digital Piano Settings
The setting screens explained in this section can also be
displayed using the 3SETTING button. This section
explains how to display settings and parameter list.
1.
Press the 3SETTING button to display the
setting screen.
This displays a list of parameters.
2.
Use the clw and q arrow buttons to
select a parameter.
For details about parameters, see the “Parameter
List” (page EN-39). The shaded cells in the parameter
list are top menu items.
“>Ent” to the right of an item indicates that pressing
the cmENTER button while that item is selected will
display a submenu of parameters.
3.
Use the clu and i arrow buttons to
change the currently selected value or
setting.
For details about setting procedures, see “Changing a
Number or a Value” in “Operations Common to All
Modes” (page EN-8).
4.
After a parameter setting is the way you want,
press the 3SETTING button to exit the
setting screen.
bq br bs cm cn
3 8
cl
Configuring Settings
AP700-ES-1B.indd 40 2015/04/06 12:23:01
Configuring Digital Piano Settings
EN-39
English
Parameter List
Display Text Description Settings Go here for more
information
Duet >Ent Duet Mode parameters.
Duet Mode Duet Mode setting
The Hall Simulator and chorus cannot be applied
while in the Duet Pan Mode.
(See the page
to the right.)
Splitting the Keyboard for
Duet Play (page EN-14)
Upper Octave Octave of the right keyboard To change the octaves of the
duet keyboards (page EN-15)
Lower Octave Octave of the left keyboard
Acoustic Simulator >Ent Acoustic Simulator parameters
Hammer Response Hammer Response (See the page
to the right.)
Adjusting Acoustic Piano
Sound Characteristics (page
EN-12)
Lid Simulator Lid Simulator
Damper Resonance Damper Resonance
Damper Noise Damper Noise
String Resonance String Resonance
Effect >Ent Tone effect parameters
Hall Simulator Hall Simulator
You can disable Hall Simulator by selecting “OFF
(Disabled) for this setting.
(See the page
to the right.)
To apply a hall simulator
(page EN-13)
Position Instrument sound listening position To select a listening position
(page EN-13)
Chorus Chorus To apply chorus to a tone
(page EN-14)
Brilliance Brilliance To adjust brilliance (page
EN-14)
AP700-ES-1B.indd 41 2015/04/06 12:23:02
EN-40
Configuring Digital Piano Settings
Keyboard >Ent Keyboard parameters
Touch Response Touch Response (See the page
to the right.)
Changing Keyboard Response
to Touch Pressure (Touch
Response) (page EN-20)
Transpose Changes the pitch of notes in semitone units.
Raising the key of the Digital Piano can cause the
highest notes in the range of a tone to become
distorted.
To change the pitch in
semitone steps (Transpose)
(page EN-20)
Octave Shift Changes the pitch of notes in octave units.
Raising the key of the Digital Piano can cause the
highest notes in the range of a tone to become
distorted.
Octave Shift (page EN-22)
Temper. Type Temperament Type Changing the Temperament
of the Keyboard (page EN-22)
Temper. Base Note Temperament Base Note
Stretch Tune Stretch tuning. Selects a tuning curve. To change the tuning curve
(Stretch Tuning) (page EN-21)
Tuning Makes fine adjustments in the pitch of notes. Fine Tuning (Tuning) (page
EN-21)
Layer/Split >Ent Layer parameters and split parameters
The editing screen can also be displayed by holding down the cnLAYER button.
The editing screen will not appear if the Digital Piano is in the Duet Mode.
Upper1 Octave Layer Upper 1 octave setting (See the page
to the right.)
To change the octave of each
layer (page EN-17)
Upper2 Octave Layer Upper 2 octave setting
Layer Balance Layer volume balance To adjust the volume balance
between two layered tones
(page EN-16)
Lower Octave Split Lower Octave setting To modify split settings (page
EN-18)
Lower Volume Split lower volume setting
Split Point Split point setting
Lower Pedal Lower Pedal. Selects whether or not damper pedal
operations affect the lower range tones when the
keyboard is split.
Display Text Description Settings Go here for more
information
AP700-ES-1B.indd 42 2015/04/06 12:23:02
Configuring Digital Piano Settings
EN-41
English
Concert Play >Ent Concert play parameters
The editing screen can also be displayed by holding down the brCONCERT PLAY button.
Volume Playback volume (See the page
to the right.)
To adjust the playback
volume level of a Concert Play
song (page EN-25)
Song >Ent Song data parameters
The editing screen can also be displayed by holding down the bsSONG button.
MIDI Volume Music Library, MIDI Recorder, Standard MIDI file,
Grand Piano demo song playback volume
(See the page
to the right.)
To adjust the playback
volume level of a MIDI
Recorder song (page EN-34)
To adjust the playback
volume level of song data
(page EN-27)
Audio Volume Audio Recorder song playback volume To adjust the playback
volume level of song data
(page EN-27)
ML Clear >Ent User music library clear
1.Use the clw and q arrow buttons to select the
number of the song to be deleted and then press the
cmENTER button.
This will cause the confirmation message
“Sure?” to appear.
2.Press the cli arrow button to delete.
To cancel, press the clu arrow button.
The message “Please Wait...”will remain on the
display while the operation is being performed.
Do not perform any operation while this
message is on the display. “Complete!” appears
on the display after the operation is complete.
––
Audio Delete >Ent Deletes the currently selected Audio Recorder song. To delete the currently
selected Audio Recorder song
data (page EN-37)
Recorder >Ent Record function parameters
The editing screen can also be displayed by holding down the bqREC button.
Recorded Part Recorded part playback (See the page
to the right.)
To record the other track of a
song (page EN-33)
Part Clear >Ent Track delete To delete recorded data (page
EN-34)
Precount Precount prior to a song (See the page
to the right.)
To configure precount
settings (page EN-33)
Audio Rec with MIDI For audio recording, you can select whether or not a
Music Library or MIDI Recorder song should be
played back during recording.
To record keyboard play
while playing back a MIDI
Recorder song or song data
(page EN-36)
Display Text Description Settings Go here for more
information
AP700-ES-1B.indd 43 2015/04/06 12:23:02
EN-42
Configuring Digital Piano Settings
Metronome >Ent Metronome function parameters
The editing screen can also be displayed by holding down the 8METRONOME button.
Tempo Metronome tempo (See the page
to the right.)
Using the Metronome (page
EN-19)
Beat Metronome beat
This setting cannot be changed while playback of a
Music Library song is in progress.
Volume Metronome volume level
General >Ent Other Digital Piano parameters
LCD Contrast Digital Piano display contrast (See the page
to the right.)
Adjusting Display Contrast
(page EN-7)
Auto Resume Digital Piano setup backup. When this setting is
enabled, the Digital Piano remembers its current
settings when it is turned off, and restores them the
next time power is turned on.
The settings below are not remembered.
Song part (LR) selection, Operation lock, Local
Control, Concert Play song mode (LISTEN, PLAY),
Concert Play song tempo
Off
(Disabled),
On
(Enabled)
Auto Power Off Auto Power Off (See the page
to the right.)
Auto Power Off (page EN-6)
Operation Lock Operation lock. Operation Lock (page EN-7)
Half Pedal Pos. Half pedal position To adjust the half pedal
trigger position (page EN-11)
Headphone Mode Headphone mode. The Headphone Mode
automatically performs timbre compensation while
headphones are being used to reproduce the natural
expanse of sound that reaches the ears when an
acoustic piano is played. The initial default setting is
“On”.
On: Enabled; Off: Disabled
Off
(Disabled),
On
(Enabled)
Volume Sync EQ Volume sync equalizer. Automatically performs
timbre compensation in accordance with the volume
level. This feature ensures that low range and/or
high range sounds are easier to hear, even at low
volume levels. The initial default setting is “Normal”.
Off: Compensation disabled;
Weak: Weak compensation;
Normal: Normal compensation;
Strong: Strong compensation
This function is intended for use with sound
output by the Digital Piano’s speakers.
When outputting from the Digital Piano’s LINE
OUT R and/or L/MONO terminal, you can switch
to a timbre suitable for line out. To do so, plug
headphones into the Digital Piano’s PHONES jack,
and then disable both the Headphone Mode and
Volume Sync Equalizer.
Off
(Disabled),
Weak,
Normal,
Strong
Factory Reset >Ent Return system to initial factory defaults. Returning the Digital Piano to
Its Factory Default Settings
(page EN-7)
Display Text Description Settings Go here for more
information
AP700-ES-1B.indd 44 2015/04/06 12:23:02
Configuring Digital Piano Settings
EN-43
English
MIDI >Ent MIDI parameters
Local Control Local Control. Selecting “Off” for Local Control cuts
off the Digital Piano’s sound source, so no sound is
produced by the Digital Piano when keys are
pressed.
Performing certain Digital Piano operations may
cause Local Control to turn on automatically.
Off
(Disabled),
On
(Enabled)
Keyboard CH Send channel. Specifies one of the MIDI channels (1
through 16) as the Send Channel, which is used for
sending MIDI messages to an external device.
1 to 16
USB Flash >Ent USB flash drive parameters
Load >Ent Load data from USB flash drive into Digital Piano
memory.
Loading USB Flash Drive
Data into Digital Piano
Memory (page EN-50)
Save >Ent Save data from Digital Piano memory to USB flash
drive.
Saving Digital Piano Data to a
USB Flash Drive (page EN-49)
Delete >Ent Delete data from USB flash drive. Deleting USB Flash Drive File
(page EN-51)
Rename >Ent Rename file on USB flash drive. Renaming a USB Flash Drive
File (page EN-51)
Format >Ent Format USB flash drive. To format a USB flash drive
(page EN-48)
Display Text Description Settings Go here for more
information
AP700-ES-1B.indd 45 2015/04/06 12:23:02
EN-44
USB Flash Drive
Your Digital Piano supports the following USB flash drive operations.
(1) USB Flash Drive on the Digital Piano (2) Saving Digital Piano Data to a USB Flash Drive
1-1. Playing back audio data
Audio Recorder songs
)Playing Back Song Data Stored on a USB
Flash Drive (page EN-27)
General audio data
)Saving Standard Song Data to a USB Flash
Drive (page EN-48)
Concert Play songs obtained with a computer,
etc.
)Concert Play Songs Obtained with a
Computer, etc. (page EN-25)
Audio Recorder songs*
)Audio Recorder (Recording to a USB Flash
Drive) (page EN-35).
*During recording of an Audio Recorder
song, the data is stored directly to the
USB flash drive, so a save operation is
not required.
MIDI Recorder songs
)Saving Digital Piano Data to a USB Flash
Drive (page EN-49)
1-2. Loading data into Digital Piano Memory
MIDI Recorder songs
)Loading USB Flash Drive Data into Digital
Piano Memory (page EN-50)
1-3. Deleting Data
)Deleting USB Flash Drive File (page EN-51)
ck cm cp
cl
USB Flash Drive Digital Piano
(2)
(1)
AP700-ES-1B.indd 46 2015/04/06 12:23:02
USB Flash Drive
EN-45
English
This section explains the information below, which is required to prepare a USB flash drive before using it with the
Digital Piano.
USB flash drive supported for use with the Digital Piano
Data types supported by the Digital Piano using a USB flash drive
Connecting a USB flash drive to and detach it from the Digital Piano
Formatting a USB flash drive
Capacity: 32GB or less recommended
*CAUTION
Operation of the above type of USB flash drive has been confirmed, but this does not guarantee operation.
Use a FAT (FAT32) format USB flash drive.
You may not be able to use a USB flash drive that is recognized as multiple drives on your computer.
A USB flash drive that is recognized as a CD-ROM on your computer is not supported.
A USB flash drive with an anti-virus function and/or security functions is not supported.
Preparing a USB Flash Drive
Supported USB Flash Drives
AP700-ES-1B.indd 47 2015/04/06 12:23:03
EN-46
USB Flash Drive
Audio Data
WAV format:
Standard audio file format mainly used by Windows. This format needs to be supported in order to play back on
a computer or portable music player. Linear PCM, 16-bit, 44.1kHz, stereo WAV format (File name extension:
.WAV) is required for playback on a computer or portable music player.
MIDI data
CSR format:
CASIO original file format. This file format adds CASIO proprietary data to MIDI data. (File name extension:
.CSR)
CM2 format:
CASIO original file format. This file format adds CASIO proprietary data to MIDI data. CM2 format files can be
purchased from the CASIO music website. (File name extension: .CM2)
SMF (Standard MIDI File) Format 0/1:
Standard MIDI file format that can be exchanged with a compatible device from another manufacturer. (File
name extension: .MID)
*1 Since data can be directly recorded to and played back from a USB flash drive, there is no need to store it from or load it into
Digital Piano memory.
*2 Can be converted to Standard MIDI file (SMF format 0, File name extension: .MID) for save.
Saving as a CSR format file
In addition to performance information, model-specific settings (such as Acoustic Simulator) are also saved to the file, so
you can reproduce the original performance in its entirety after re-loading the data. Note, however, that CSR file data in not
compatible with other musical instrument types and models.
Saving as an SMF format file
Performance information is saved, but models specific settings are not saved. Because of this, playback of a re-loaded file
will be in accordance with the current Digital Piano setup, which may be different from the original setup. If you want to
play with the original setup, you will need to configure it manually. Since this is an SMF file, it can be used on another
musical instrument that supports SMF. Of course, playback will be somewhat different when played on another musical
instrument.
*3 Songs downloaded from the CASIO website, etc.
*4 Data can be loaded to Music Library Songs 61 to 70. For more information, see “Loading USB Flash Drive Data into Digital
Piano Memory” (page EN-50).
Data Types Supported by the Digital Piano
Data Type File Name
Extension
Save
(Digital Piano
3
USB Flash
Drive)
Load
(USB Flash
Drive
3
Digital Piano)
Direct
Recording to
USB Flash
Drive
Direct USB
Flash Drive
Playback
Audio Data Audio Recorder song file
(page EN-30) .WAV *1Yes
Yes
General audio file
MIDI data MIDI Recorder song files
(page EN-30) .CSR Yes *2
Yes *4
No
CASIO MIDI file *3.CM2
Standard MIDI file
(SMF format) .MID Yes No
AP700-ES-1B.indd 48 2015/04/06 12:23:03
USB Flash Drive
EN-47
English
Be sure to observe the precautions provided in the
documentation that comes with the USB flash drive.
Avoid using a USB flash drive under the following
conditions. Such conditions can corrupt data stored
on the USB flash drive.
Areas subjected to high temperature, high
humidity, or corrosive gas
Areas subjected to strong electrostatic charge and
digital noise
Never remove the USB flash drive while data is
being written to or loaded from it. Doing so can
corrupt the data on the USB flash drive and damage
the USB flash drive port.
Never insert anything besides a USB flash drive into
the USB flash drive port. Doing so creates the risk of
malfunction.
When you plug in a USB flash drive, the Digital
Piano initially needs to “mount” the USB flash drive
and prepare for data exchange. Note that Digital
Piano operations are momentarily disabled while a
USB flash drive mounting sequence is being
performed, which is indicated by the cpUSB button
lamp flashing. The lamp will stop flashing and remain
lit after mounting is complete. It may take up to 10 or
20 seconds or even longer for a USB flash drive to
be mounted. Do not attempt to perform any
operation on the Digital Piano while a mounting
sequence is in progress. A USB flash drive needs to
be mounted each time it is connected to the Digital
Piano.
To insert a USB flash drive
1.
As shown in the illustration below, insert the
USB flash drive into the Digital Piano’s USB
flash drive port.
Carefully push the USB flash drive in as far as it will
go. Do not use undue force when inserting the USB
flash drive.
Static electricity conducted to the USB flash drive
port from your hand or from a USB flash drive can
cause malfunction of the Digital Piano. If this
happens, turn the Digital Piano off and then back on
again.
To remove a USB flash drive
1.
Check to confirm that there is no data
exchange operation being performed, and
then pull the USB flash drive straight out.
A USB flash drive can become warm after very long
use. This is normal and does not indicate
malfunction.
To connect a USB flash drive to and to
detach it from the Digital Piano
USB flash drive
USB flash drive port
AP700-ES-1B.indd 49 2015/04/06 12:23:03
EN-48
USB Flash Drive
Formatting a USB flash drive on the Digital Piano will
automatically create the folders described below.
MUSICDAT: Stores the following types of data:
Auto recording/playback songs,
Music Library songs, MIDI songs, etc.
CP: Concert Play songs obtained with a computer,
etc.
Be sure to format a USB flash drive on the Digital
Piano before using it for the first time.
Before formatting a USB flash drive, make sure it
does not have any valuable data stored on it.
The format operation performed by this Digital Piano
is a “quick format”. If you want to completely delete
all of the data in USB flash drive, format it on your
computer or some other device.
This Digital Piano supports USB flash drives
formatted to FAT32. If your USB flash drive is
formatted to a different file system, use the
Windows format function to reformat it to FAT32.
Do not use quick format.
1.
Insert the USB flash drive you want to format
into the Digital Piano’s USB flash drive port.
2.
Press the cpUSB button.
3.
Use the clw and q arrow buttons to
select “Format”.
4.
Press the cmENTER button.
This will cause the confirmation message “Sure?” to
appear.
5.
Press the cli arrow button to execute the
format operation.
To cancel the format operation, press the clu arrow
button.
The message “Please Wait...” will remain on the
display while the operation is being performed. Do
not perform any operation while this message is on
the display. “Complete!” appears on the display after
the operation is complete.
Formatting a large-capacity USB flash drive can take
several minutes.
Even when the file format is WAV (general audio data)
or SMF (standard MIDI file), the procedure below can
be used to save data to USB flash drive and play it back
on the Digital Piano.
1.
Connect the USB flash drive to your
computer.
2.
Move the song data file you want to play back
to the MUSICDAT folder on the USB flash
drive.
For information about playback see “Playing Back
Song Data Stored on a USB Flash Drive” (page
EN-27).
To format a USB flash drive
U S B F L A S H
F o r m a t
Saving Standard Song Data to
a USB Flash Drive
Copyrights
You are allowed to use recordings for your own
personal use. Any reproduction of an audio or music
format file, without the permission of its copyright
holder, is strictly prohibited under copyright laws
and international treaties. Also, making such files
available on the Internet or distributing them to third
parties, regardless of whether such activities are
conducted with or without compensation, is strictly
prohibited under copyright laws and international
treaties. CASIO COMPUTER CO., LTD. shall not be
held in any way liable for any use of this Digital
Piano that is illegal under copyright laws.
AP700-ES-1B.indd 50 2015/04/06 12:23:03
USB Flash Drive
EN-49
English
Digital Piano memory data (MIDI recorder songs) can
be saved to a USB flash drive.
MIDI Recorder songs can be converted to standard
MIDI (SMF) files and stored on the USB flash drive.
During recording of an Audio Recorder song, the
data is stored directly to the USB flash drive, so the
operation below is not required.
1.
Insert the USB flash drive into the Digital
Piano’s USB flash drive port.
2.
Press the cpUSB button.
3.
Use the clw and q arrow buttons to
select “Save” and then press the cmENTER
button.
4.
Use the clw and q arrow buttons to
select a file type.
MID: Converts the data to an SMF file and saves it to
the USB flash drive.
CSR: Saves the data as-is (CSR file) to the USB flash
drive.
For details about file formats, see “Data Types
Supported by the Digital Piano” (page EN-46).
5.
Use the arrow buttons to change the name as
required.
Use the clu and i arrow buttons to move the
cursor to the input position.
Use the clw and q arrow buttons to scroll
through characters at the current cursor position.
Supported input characters are shown in the table
below.
6.
Press the cmENTER button.
This will cause the confirmation message “Sure?” to
appear.
7.
Press the cli arrow button to execute the
save operation.
To cancel the save operation, press the clu arrow
button.
The message “Please Wait...” will remain on the
display while the operation is being performed. Do
not perform any operation while this message is on
the display. “Complete!” appears on the display after
the operation is complete.
Saving Digital Piano Data to a
USB Flash Drive
S a v e
9
J
T
`
8
I
S
_
-
7
H
R
^
)
6
G
Q
@
(
5
F
P
Z
'
4
E
O
Y
&
3
D
N
X
$
2
C
M
W
~
1
B
L
V
}
0
A
K
U
{
AP700-ES-1B.indd 51 2015/04/06 12:23:03
EN-50
USB Flash Drive
MIDI data (MIDI Recorder songs, songs downloaded
from the CASIO website, standard MIDI files, etc.)
stored on a USB flash drive can be loaded to Digital
Piano memory and stored in Music Library numbers 61
through 70.
To clear the contents of Music Library numbers 61
through 70 (User Music Library) that you loaded
from a USB flash drive, see “Configuring Digital
Piano Settings” (page EN-38) and the following item
in the Parameter List (page EN-39): “Song” 3 “ML
Clear >Ent” (page EN-41).
For information about playing back audio data
stored on a USB flash drive, see “Playing Back Song
Data Stored on a USB Flash Drive” (page EN-27).
PREPARATION
On your computer, copy the files you want to import
to Digital Piano memory to the USB flash drive.
1.
Insert the USB flash drive into the Digital
Piano’s USB flash drive port.
2.
Press the cpUSB button.
3.
Use the clw and q arrow buttons to
select “Load” and then press the cmENTER
button.
4.
Use the clw and q arrow buttons to
select a USB flash drive data number.
5.
Use the clu and i arrow buttons to move
the cursor to the Digital Piano data numbers.
6.
Use the clw and q arrow buttons to
select a Digital Piano data number.
Any data number that already contains imported
data will be indicated by an asterisk (*) to the left of
the data number.
Pressing the clu arrow button moves the cursor to
USB flash drive data numbers, so you can select a
different USB flash driver data number, if you want.
7.
Press the cmENTER button.
This will cause the confirmation message “Sure?” to
appear.
8.
Press the cli arrow button to execute the
load operation.
To cancel the load operation, press the clu arrow
button.
The message “Please Wait...” will remain on the
display while the operation is being performed. Do
not perform any operation while this message is on
the display. “Complete!” appears on the display after
the operation is complete.
Loading USB Flash Drive Data
into Digital Piano Memory
L o a d
AP700-ES-1B.indd 52 2015/04/06 12:23:03
USB Flash Drive
EN-51
English
You can use the procedure below to delete a specific
file from a USB flash drive.
1.
Insert the USB flash drive into the Digital
Piano’s USB flash drive port.
2.
Press the cpUSB button.
3.
Use the clw and q arrow buttons to
select “Delete” and then press the cmENTER
button.
4.
Use the clw and q arrow buttons to
select a data item name.
5.
Press the cmENTER button.
This will cause the confirmation message “Sure?” to
appear.
6.
Press the cli arrow button to execute the
delete operation.
To cancel the delete operation, press the clu arrow
button.
The message “Please Wait...” will remain on the
display while the operation is being performed. Do
not perform any operation while this message is on
the display. “Complete!” appears on the display after
delete is complete.
Use the procedure below to rename a file on a USB
flash drive using Digital Piano operations.
1.
Insert the USB flash drive into the Digital
Piano’s USB flash drive port.
2.
Press the cpUSB button.
3.
Use the clw and q arrow buttons to
select “Rename” and then press the
cmENTER button.
4.
Use the clw and q arrow buttons to
select the file.
5.
Use the arrow buttons to rename the file.
Use the clu and i arrow buttons to move the
cursor to the input position.
Use the clw and q arrow buttons to scroll
through characters at the current cursor position.
Supported input characters are shown in the table
below.
6.
Press the cmENTER button.
This will cause the confirmation message “Sure?” to
appear.
7.
Press the cli arrow button to execute the
rename operation.
To cancel the save operation, press the clu arrow
button.
The message “Please Wait...” will remain on the
display while the operation is being performed. Do
not perform any operation while this message is on
the display. “Complete!” appears on the display after
delete is complete.
Deleting USB Flash Drive File
D e l e t e
Renaming a USB Flash Drive
File
9
J
T
`
8
I
S
_
-
7
H
R
^
)
6
G
Q
@
(
5
F
P
Z
'
4
E
O
Y
&
3
D
N
X
$
2
C
M
W
~
1
B
L
V
}
0
A
K
U
{
AP700-ES-1B.indd 53 2015/04/06 12:23:04
EN-52
USB Flash Drive
The table below shows messages that appear on the Digital Piano display when data transfer fails or when another
type of error is generated.
To clear an error display, press the ckEXIT button.
Error Indicators
Display Cause Action
No Media 1. The USB flash drive is not connected to the Digital
Piano’s USB flash drive port.
1. Correctly plug the USB flash drive into the USB
flash drive port.
2. The USB flash drive was removed while some
operation was in progress.
2. Do not remove the USB flash drive while any
operation is in progress.
3. The USB flash drive is write-protected. 3. Unprotect the USB flash drive.
4. The USB flash drive has anti-virus software. 4. Use a USB flash drive that does not have anti-virus
software.
5. The Digital Piano is unable to recognize the USB
flash drive for some reason.
5. Remove the USB flash drive, turn the Digital Piano
off and then back on again, and then correctly load
the USB flash drive.
No File There is no loadable file in the “MUSICDAT” folder
or no playable file in the “MUSICDAT” folder.
Format the USB flash drive on the Digital Piano.
Move the file you want to load into the
“MUSICDAT” folder or the file you want to play
into the “MUSICDAT” folder (page EN-48).
No Data You are attempting to save data to a USB flash drive
when there is no data to save.
Record something before performing a save
operation.
Read Only A read-only file with the same name you are trying to
use is already stored on USB flash drive.
Change the name and then save the new data.
Remove the read-only attribute from the existing
USB flash drive file and overwrite it with the new
data.
Use a different USB flash drive.
Media Full There is not enough space available on the USB flash
drive.
Delete some of the files on the USB flash drive to
make room for new data or use a different USB flash
drive.
Too Many Files 1. There are too many files on the USB flash drive. 1. Delete some of the files on the USB flash drive to
make room for new data.
2. There is a file named TAKE99.WAV in the
“MUSICDAT” folder.
2. Delete the WAV file in the “MUSICDAT” folder.
Not SMF0/1 You are attempting to play back SMF Format 2 song
data.
This Digital Piano supports playback of SMF Format
0 or Format 1 only.
Size Over The data on the USB flash drive is too big to play. Reduces the size of the data so it can be played.
Wrong Data 1. The USB flash drive data is corrupted.
2. USB flash drive contains data that is not supported
by this Digital Piano.
Memory Full There is not enough Digital Piano memory available
to convert a MIDI recorder song to SMF data and
store it on the USB flash drive.
Reduce the size of the song data.
Example:
Delete any tracks that are not required.
Format Error 1. The USB flash drive format is not compatible with
this Digital Piano.
1. Format the USB flash drive on the Digital Piano.
2. The USB flash drive is corrupted. 2. Use a different USB flash drive.
Media Error The USB flash drive is corrupted. Use a different USB flash drive.
File Name Error 1. When renaming a file on a USB flash drive, you
specified a new file name that is already used for
another file on the USB flash drive.
1. Rename to a different file name.
2. You are attempting to play a Concert Play song
data obtained with a computer, etc. when there are
no files in the “CP” folder. Or the file names are
wrong.
2. Change name part (the part to the left of the file
name extension) of the Concert Play song files
(both the .LSN and .PLY files) to the same name.
Next, place the files into the “CP” folder.
AP700-ES-1B.indd 54 2015/04/06 12:23:04
EN-53
English
Connecting to a Computer
You can connect the Digital Piano to a computer and
exchange MIDI data between them. You can send play
data from the Digital Piano to commercially available
music software running on your computer, or you can
send MIDI data from your computer to the Digital
Piano for playback.
The following shows the minimum computer system
requirements for sending and receiving MIDI data.
Check to make sure that your computer complies with
these requirements before connecting the Digital Piano
to it.
Operating System
Windows Vista® *1
Windows® 7*2
Windows® 8 *3
Windows® 8.1 *4
Mac OS® X (10.3.9, 10.4.11, 10.5.X, 10.6.X, 10.7.X,
10.8.X, 10.9.X)
USB port
Never connect to a computer that does not conform
to the above requirements. Doing so can cause
problems with your computer.
For the latest news about supported operating
systems, visit the website at the URL below.
http://world.casio.com/
Make sure you follow the steps of the procedure
below exactly. Connecting incorrectly can make data
send and receive impossible.
1.
Turn off the Digital Piano and then start up
your computer.
Do not start up the music software on your computer
yet!
2.
After starting up your computer, use a
commercially available USB cable to connect
it to the Digital Piano.
3.
Turn on the Digital Piano.
If this is the first time you are connecting the Digital
Piano to your computer, the driver software required
to send and receive data will be installed on your
computer automatically.
4.
Start up commercially available music
software on your computer.
5.
Configure the music software settings to
select “CASIO USB-MIDI” as the MIDI device.
For information about how to select the MIDI device,
see the user documentation that comes with the
music software you are using.
Be sure to turn on the Digital Piano first before
starting up your computer’s music software.
Once you are able to connect successfully, there is no
problem with leaving the USB cable connected when
you turn off your computer and/or Digital Piano.
For detailed specifications and connections that
apply to MIDI data send and receive by this Digital
Piano, see the latest support information provided
by the website at the following URL.
http://world.casio.com/
Minimum Computer System
Requirements
*1: Windows Vista (32-bit)
*2: Windows 7 (32-bit, 64-bit)
*3: Windows 8 (32-bit, 64-bit)
*4: Windows 8.1 (32-bit, 64-bit)
Connecting the Digital Piano
to Your Computer
Computer USB port
A connector
Digital Piano USB port
B connector
USB cable
(A-B type)
AP700-ES-1B.indd 55 2015/04/06 12:23:04
EN-54
Connecting to a Computer
The letters MIDI stand for Musical Instrument Digital
Interface, which is the name of a worldwide standard
for digital signals and connectors that makes it possible
to exchange musical data between musical instruments
and computers (machines) produced by different
manufacturers.
For details about MIDI parameters, see “Configuring
Settings” on page EN-38, and “MIDI >Ent” in the
“Parameter List” on page EN-39.
To connect the Digital Piano to another electronic
musical instrument for performance using MIDI
data, use the above USB cable, a separately available
MIDI cable that is compatible with both connectors,
or a commercially available MIDI cable to connect
them.
For detailed information about MIDI
Implementation, visit the CASIO website at:
http://world.casio.com/.
Using MIDI
What is MIDI?
AP700-ES-1B.indd 56 2015/04/06 12:23:04
EN-55
English
Getting Ready
Before assembling the stand, first take a few moments
to check that all of the items shown below are present.
This stand does not include any of the tools required
for assembly. It is up to you to prepare a large
Philips head (+) screwdriver for assembly.
Do not use any screws other than those that come
with the stand. Doing so risks damage to the stand
and/or Digital Piano.
You can find the screws in a plastic bag inside of the
packing material.
If anything is missing or damaged, contact your local
CASIO service provider.
*CAUTION
Assembly of the stand should be performed by at
least two people working together. The Digital Piano
unit is particularly heavy. When moving it, get at
least one other person to help you and handle with
care.
This stand should be assembled on a flat surface.
Do not remove the tape securing the keyboard cover
in place until assembly is complete. Removing the
tape can cause the keyboard cover to open and close
during assembly, creating the risk of personal injury
to your hands and fingers.
Take care that you do not pinch your fingers
between parts when assembling them.
When placing the Digital Piano on the floor, be sure
to place it on something soft (a blanket, cushion,
etc.). Do not place the Digital Piano directly onto the
floor.
Assembling the Stand
C
D
A
B
Part Qty
E4
F6
G1
H2
I4
J4
K1
L1
M1
AP700-ES-1B.indd 57 2015/04/06 12:23:04
EN-56
Getting Ready
1.
Unfasten the band 1 that bundles the pedal
cable to the back of crosspiece D and pull
the pedal cord out from the crosspiece.
2.
Attach side panels A and B to crosspiece
D. Secure the side panels using four screws
E.
When installing parts 2, slide the brackets 3 into
the slots in either end of crosspiece D. If the brackets
3 are not inserted into the ends of the crosspiece D
as far as they will go, the screws E will not be able to
enter into the screw holes of the brackets 3, which
can strip the threads of the screws.
Cover the screw heads with the caps I.
3.
Slide back panel C into the grooves 4 of
the side panels.
When installing back panel C, make sure that the
widely spaced screw holes along the bottom of the
panel are on the left (when viewed from the front of
the stand), and the narrowly spaced holes are on the
right.
4.
Use the two screws H to secure the top left
and right edges of the back panel C to the
brackets 5 of side panels A and B.
At location 6, slip the clip G onto to the screw H
before installing the screw.
1
Pedal cable
A
D
B
I
I
3
2
E
E
C
4
4
H
H
5
6
5
G
H
B
A
5
AP700-ES-1B.indd 58 2015/04/06 12:23:05
Getting Ready
EN-57
English
5.
Next, secure the bottom of the back panel C
with the six F screws.
6.
Adjust the height adjustment screw 7 to
provide support so crosspiece D does not
bow downwards when the pedals are
pressed.
Pressing the pedals without adjusting height
adjustment screw 7 can result in damage to
crosspiece D. Always make sure you adjust height
adjustment screw 7 before operating the pedals.
7.
Place the piano onto the stand.
In order to ensure you do not get your fingers
pinched between the piano and the stand, grasp the
piano on its sides (not its ends) at the locations
marked with stars () in the illustration.
At this time the screws on the bottom of the piano 8
should hook into the cutouts in the stand brackets 9.
F
B
A
C
7
D
9
9
At least 10cm
At least 10cm
9
8
Bracket cutout
Back of piano
Stand side panel
AP700-ES-1B.indd 59 2015/04/06 12:23:05
EN-58
Getting Ready
8.
First, use the two screws J to secure the
back of the piano (both left and right side) to
the stand. Next, use the two screws J to
secure the front of the piano (both left and
right side).
The screws J keep the piano from slipping off the
stand. Never use the piano without the screws J
installed.
9.
Affix the adaptor cord clip M next to the
power terminal (DC 24V).
Be sure to insert felt or other material between the
rubber feet and flooring. Do not allow direct contact
between them. Some types of flooring material may
become discolored or damaged by direct contact with
the rubber feet.
1.
Insert the plug of the AC adaptor that comes
with the Digital Piano into its power terminal
(DC 24V).
Using the Clip M
To fasten the clip
As shown in the illustration, press down on (a) to
force the tip of the clip into the slot. Press down until
you hear the clip click securely into place.
To release the clip
As shown in the illustration, press (b) in the
direction indicated by the arrow.
Handling Precautions
J
J
M
DC 24V terminal
To connect the cables
Clip M
AC adaptor plug
Supplied AC adaptor
¨á©
Slot
Tip
¨â©
AP700-ES-1B.indd 60 2015/04/06 12:23:05
Getting Ready
EN-59
English
2.
Orienting the pedal plug as shown in the
illustration, plug it into the pedal connector on
the bottom of the piano.
Secure the pedal cord with the clip G.
3.
Plug the power cord of the AC adaptor that
comes with the Digital Piano into a household
power outlet as shown in the illustration
below.
Make sure that the cover is full open whenever you are
playing on the keyboard. A partially open cover can
suddenly close unexpectedly and pinch your fingers.
Also take care to avoid pinching your fingers whenever
opening or closing the keyboard cover.
1.
Insert music stand into the groove on the
Digital Piano console as shown in the figure
below.
2.
Install the headphones hook.
Keyboard Cover
G
Pedal plug
Household power outlet
AC adaptor
Power cord
To install the music stand and
headphones hook
2-1. Insert the headphones hook K into the two
holes on the bottom of the piano.
2-2. Use screw L to secure the headphones hook
in place.
L
K
2-2
2-1
AP700-ES-1B.indd 61 2015/04/06 12:23:05
EN-60
Getting Ready
Use both hands whenever opening or closing the lid,
and take care that you do not close it on your fingers.
Do not open the lid too wide. Doing so creates the
risk of damage to the cover and Digital Piano.
Stand in front of the Digital Piano on the right side
when opening or closing the lid.
1.
Lift up the lid as shown in the illustration.
The lid has a support bracket (indicated by the star
in the illustration) attached to its inside surface.
Check to make sure that the support bracket is
standing up fully.
1.
Carefully lift up slightly on the lid.
2.
Use the fingers of your left hand to press
back on the support bracket () as you
slowly and carefully lower the lid.
The support bracket is designed to prevent sudden
closing of the lid. Should the support bracket stop
moving, once again press back on it () as you slowly
and carefully lower the lid.
Opening and Closing the
Piano Lid
To open the lid
To close the lid
AP700-ES-1B.indd 62 2015/04/06 12:23:05
Getting Ready
EN-61
English
Protective tape is affixed to the front edges of the
keyboard keys to protect them during shipment.
Remove the protective tape before using the Digital
Piano.
Your Digital Piano runs on standard household power.
Be sure to turn off power whenever you are not using
the Digital Piano.
Use only the AC adaptor (JEITA Standard, with unified
polarity plug) that comes with this Digital Piano. Use
of a different type of AC adaptor can cause
malfunction of the Digital Piano.
Specified AC Adaptor: AD-E24500LW
Use the supplied power cord to connect the AC
adaptor.
Never connect the AC adaptor that comes with this
Digital Piano to any other device besides this Digital
Piano. Doing so creates the risk of malfunction.
Make sure the Digital Piano is turned off before
plugging in or unplugging the AC adaptor.
The AC adaptor will become warm to the touch after
very long use. This is normal and does not indicate
malfunction.
Unplug the AC adaptor from the power outlet if you
do not plan to use the Digital Piano for a long time.
Disconnect Protection Precautions
(1) Never pull on the cord with excessive force.
(2) Never repeatedly pull on the cord.
(3) Never twist the cord at the base of the plug or
connector.
(4) Loop and bundle the power cord, but never wind it
around the AC adaptor.
(5) Before moving the Digital Piano, be sure to unplug
the AC adaptor from the power outlet.
Locating the AC Adaptor for Use
When using the AC adaptor, put in a location that
satisfies the conditions below.
A location free of splashing liquids
The AC adaptor is designed for indoor use only.
Do not put it in a location where it may become
wet and do not place a vase or any other container
of liquid on top of it.
A location that is not humid.
A roomy, well ventilated location
Do not cover the AC adaptor with newspaper,
table cloth, curtain, or any other type of fabric.
Use a power outlet that is located near the Digital
Piano.
This will let you immediately unplug from the
power outlet should any problem occur.
When using the AC adaptor, place it on the floor
with its label surface downwards. The AC adaptor
becomes prone to emitting electromagnetic waves
when the label surface is facing upwards.
Removing the Protective Tape
from the Keyboard
Power Outlet
Using an AC Adaptor
AP700-ES-1B.indd 63 2015/04/06 12:23:06
EN-62
Getting Ready
Connect commercially available headphones to the
PHONES jacks. Connecting headphones to either of
the PHONES jack cuts off output to the speakers,
which means you can practice even late at night
without bothering others. To protect your hearing,
make sure that you do not set the volume level too high
when using headphones.
Be sure to push the headphones plug into the
PHONES jacks as far as it will go. If you don’t, you
may hear sound from only one side of the
headphones.
If the plug of the headphones you are using does not
match the PHONES jacks, use the applicable
commercially available adaptor plug.
If you are using headphones that require an adaptor
plug, make sure you do not leave the adaptor
plugged in when you unplug the headphones. If you
do, nothing will sound from the speakers when you
play.
The Headphone Mode reproduces the natural expanse
of sound that reaches the ears when an acoustic piano
is played.
The Headphone Mode is enabled only while
headphones are being used.
If external output is used while headphones are
plugged into the PHONE jack, the external output
sound is also the result of Headphone Mode
compensation.
The Headphone Mode is enabled under initial
default settings. To disable the Headphone Mode,
see “Configuring Settings” on page EN-38, and
“General” 3 “Headphone Mode” in the
“Parameter List” on page EN-39.
You can connect audio equipment or a music amplifier
to the Digital Piano and then play through external
speakers for more powerful volume and better sound
quality.
The Digital Piano automatically adjusts sound output
to optimize for headphone output (when headphones
are connected) or built-in speaker output (when
headphones are not connected).
When outputting from the Digital Piano’s LINE OUT
R and/or L/MONO terminal, you can switch to a
timbre suitable for line out. To do so, plug
headphones into the Digital Piano’s PHONES jack,
and then disable both the Headphone Mode and
Volume Sync Equalizer. For more information, see
“Headphone Mode” and “Volume Sync Equalizer”
(page EN-42).
Whenever connecting a device to the Digital Piano,
first use the 2VOLUME controller to set the volume
to a low level. After connecting, you can adjust the
volume to the level you want.
Whenever you connect any device to the Digital
Piano, be sure to read the user documentation that
comes with the device.
Connecting Headphones
Headphone Mode
PHONES jacks
Front
Stereo standard plug
Connecting Audio Equipment
or an Amplifier
INPUT 1
INPUT 2
Guitar amplifier
Keyboard amplifier, etc.
Standard plug
Standard jack
LEFT (White)
RIGHT (Red)
Audio amplifier AUX IN jack, etc.
Pin plug
Other electronic music
instrument,
CD player, audio player, etc.
AP700-ES-1B.indd 64 2015/04/06 12:23:06
Getting Ready
EN-63
English
Use commercially available cables to connect the
amplifier to the Digital Piano’s LINE OUT jacks as
shown in Figure 1. LINE OUT R jack output is right
channel sound, while LINE OUT L/MONO jack
output is left channel sound. Connecting to the LINE
OUT L/MONO jack only outputs a mixture of both
channels. It is up to you to purchase connecting cable
like the one shown in the illustration for connection of
the amplifier. Use the Digital Piano’s 2VOLUME
controller to adjust the volume level.
Use commercially available cables to connect the
external audio equipment to the Digital Piano’s LINE
OUT jacks as shown in Figure 2. LINE OUT R jack
output is right channel sound, while LINE OUT L/
MONO jack output is left channel sound. It is up to
you to purchase connecting cables like the ones shown
in the illustration for connection of audio equipment.
Normally in this configuration you must set the audio
equipment’s input selector to the setting that specifies
the terminal (such as AUX IN) to which the piano is
connected. Use the Digital Piano’s 2VOLUME
controller to adjust the volume level.
Connect the Digital Piano’s LINE IN R and LINE IN L/
MONO terminals to the audio equipment as shown in
Figure 3. Use commercially available connection
cords that match the equipment being connected to.
Connecting a cord to LINE IN L/MONO only will
cause the left and right channels to be mixed and
output from both LINE OUT R and LINE OUT L/
MONO.
Use only accessories that are specified for use with this
Digital Piano.
Use of unauthorized accessories creates the risk of fire,
electric shock, and personal injury.
You can get information about accessories that are
sold separately for this product from the CASIO
catalog available from your retailer, and from the
CASIO website at the following URL.
http://world.casio.com/
To output to a musical instrument
amplifier (Figure 1)
To output to audio equipment (Figure 2)
To input from audio equipment (Figure 3)
Bundled and Optional
Accessories
AP700-ES-1B.indd 65 2015/04/06 12:23:06
EN-64
Troubleshooting
Problem Cause Action See
Page
No sound is produced
when I press a keyboard
key.
1. The 2VOLUME controller is set
to “MIN”.
1. Rotate the 2VOLUME controller more
towards “MAX”.
) EN-6
2. Headphones or an adaptor plug is
plugged into one of the PHONES
jacks.
2. Disconnect whatever is connected to the
PHONES jacks.
) EN-62
3. MIDI Local control is turned off. 3. Turn on the Local control setting. ) EN-43
The pitch of the Digital
Piano is off.
1. Digital Piano tuning is incorrect. 1. Adjust Digital Piano tuning, or turn the
Digital Piano off and then back on again.
) EN-40
2. The Digital Piano’s key setting is
something other than “440.0Hz”.
2. Change the key setting to “440.0Hz”, or
turn Digital Piano power off and then back
on again.
) EN-40
3. Octave shift is enabled. 3. Change the octave shift setting to 0. ) EN-22
4. A non-standard temperament
setting is being used.
4. Change the temperament setting to
“00: Equal”, which is the standard modern
tuning.
) EN-22
Nothing happens when I
press a pedal.
1. The pedal unit cable is not
connected.
1. Connect the cable correctly. ) EN-58
2. The pedal unit cable plug is not
plugged in completely.
2. Make sure that the pedal unit cable plug is
inserted as far as it will go into the pedal
connector on the bottom of the Digital
Piano.
Tones and/or effects sound
strange. Turning power off
and then back on again
does not eliminate the
problem.
Example:
Note intensity
does not change even
though I alter key pressure.
The “Auto Resume” feature is turned
on.
Turn off “Auto Resume”. Next, turn power off
and then back on again.
) EN-42
I cannot transfer data after
connecting the Digital
Piano to a computer.
1. Check to make sure that the USB cable is
connected to the Digital Piano and
computer, and that the correct device is
selected with your computer’s music
software.
) EN-53
2. Turn off the Digital Piano and then exit the
music software on your computer. Next,
turn the Digital Piano back on and then
restart the music software on your
computer.
I cannot store data to a USB
flash drive or load data
from a USB flash drive.
See “Error Indicators”. ) EN-52
It takes a long time before I
can use the Digital Piano
after I turn it on.
Digital Piano memory data was
corrupted because a data transfer
operation with a computer was in
progress the last time you turned off
the Digital Piano. When this
happens, the Digital Piano performs
a memory format operation the next
time you turn it on. You cannot
perform any other operation while a
format operation is in progress.
It takes about 20 seconds after you turn on
power to perform the memory format
operation. Wait until the format operation is
complete. Note that you should take care to
avoid turning off the Digital Piano while a data
transfer operation with a computer is in
progress.
) EN-53
AP700-ES-1B.indd 66 2015/04/06 12:23:06
Troubleshooting
EN-65
English
A tone’s quality and volume
sounds slightly different
depending where it is
played on the keyboard.
This is an unavoidable result of the digital sampling process,* and does not indicate malfunction.
*Multiple digital samples are taken for the low range, middle range, and high range of the
original musical instrument. Because of this, there may be very slight differences in tonal
quality and volume between sample ranges.
When I press a button, the
note that is sounding cuts
out momentarily or there is
a slight change in how
effects are applied.
This happens when the sounds of multiple parts are sounding at the same time while using
layer, using the Duet Mode, playing back a built-in tune, recording, etc. Pressing a button when
one of these conditions exists will cause the effect setting that is built into the tone to change
automatically, which causes notes to cut out momentarily or causes a slight change in how
effects are being applied.
The play-along part (the
part played on the Digital
Piano) is slightly audible
during Play Mode playback.
Certain recording conditions may cause the play-along part to be slightly audible during Play
Mode playback. This does not indicate malfunction.
Problem Cause Action See
Page
AP700-ES-1B.indd 67 2015/04/06 12:23:06
EN-66
Reference
Product Specifications
Model AP-700BK
Keyboard 88-key piano keyboard
Layer, Split
Duet: Adjustable tone range (–2 to +2 octaves)
Transpose: 2 octaves (–12 to 0 to +12)
Octave shift: 4 octaves (–2 to 0 to +2)
Sound Source Number of Tones: 26
Maximum polyphony: 256 tones
Touch Response (3 sensitivity levels, Off)
Tuning: 415.5Hz to 440.0Hz to 465.9Hz (0.1Hz units)
Temperament: Equal temperaments plus 16 other types
Stretch Tuning: 5 types, Off, Auto Setting
Acoustic Simulator Damper Resonance, Damper noise, Hammer response, String resonance, Lid simulator
Effects Brilliance (–3 to 0 to 3), Hall simulator (6 types), Chorus (4 types), DSP, Headphone mode,
Volume sync equalizer (3 types, Off)
Concert Play Number of Songs: 15
Playback of Concert Play songs obtained with a computer, etc.
Song volume: Adjustable
Playback at 80% of normal tempo
2 Modes: LISTEN, PLAY
Music Library Number of Songs: 60, User Songs: 10 (Up to approximately 90KB per song, approximately 900KB for 10
songs)*
*Based on 1KB = 1024 bytes, 1MB = 10242 bytes
Song volume: Adjustable
Part On/Off: L, R
Grand Piano demo song 6
MIDI Recorder Functions: Real-time recording, playback
Number of Song: 1
Number of Tracks: 2
Capacity: Approximately 5,000 notes total
Recorded Data Protection: Built-in flash memory
MIDI Recorder Volume Level: Adjustable
Audio Recorder Real-time recording and playback to USB flash drive*
*Linear PCM, 16bit, 44.1 kHz, stereo .WAV format
Songs: 99 files
Approximately 25 minutes maximum recording per file.
Audio Recorder Volume Level: Adjustable
Metronome Beats: 0 to 9
Tempo Range: 20 to 255
Metronome Volume Level: Adjustable
Pedals Damper (with half-pedal operation), Soft, Sostenuto
Other Functions Setting backup
Operation Lock
MIDI 16-channel multi-timbre receive
USB Flash Drive Capacity: 32GB or less recommended
SMF direct playback, data storage, data loading, USB flash drive format,
audio data playback and storage
AP700-ES-1B.indd 68 2015/04/06 12:23:07
Reference
EN-67
English
Specifications and designs are subject to change without notice.
Inputs/Outputs PHONES jacks: Stereo standard jacks × 2
Power: 24V DC
MIDI OUT/IN terminals
LINE IN R, L/MONO jacks: Standard jacks × 2
Input impedance: 9.0KΩ
Input voltage: 200mV
LINE OUT R, L/MONO jacks: Standard jacks × 2
Output impedance: 2.3KΩ
Output voltage: 1.8V (RMS) MAX
USB port : Type B
USB flash drive port : Type A
Pedal connector
Speakers
φ
12cm × 4 +
φ
5cm × 2 (Output 30W + 30W)
Power Requirements AC Adaptor: AD-E24500LW
Auto Power Off: Approximately 4 hours after last operation. Auto Power Off can be disabled.
Power Consumption 24V = 28W
Dimensions Digital Piano and Stand: 137.7 (W) × 42.7 (D) × 91.1 (H) cm (54 1/4 × 1613/16 × 357/8 inch)
Weight Digital Piano and Stand: approximately 48.0kg (105.8 lbs)
AP700-ES-1B.indd 69 2015/04/06 12:23:07
EN-68
Reference
Be sure to read and observe the following operating
precautions.
With a model that has a recording function or other
data storage function, be sure to back up any data
you want to maintain to another medium before
submitting this product for servicing or repair.
Stored data may be accessed or even deleted as part
of servicing or repair procedures.
Location
Avoid the following locations for this product.
Areas exposed to direct sunlight and high humidity
Areas subjected to temperature extremes
Near a radio, TV, video deck, or tuner
The above devices will not cause malfunction of the
product, but the product can cause interference in
the audio or video of a nearby device.
User Maintenance
Never use benzine, alcohol, thinner, or other
chemical agents to clean the product.
To clean the product or its keyboard, wipe with a
soft cloth moistened in a weak solution of water and
a mild neutral detergent. Wring all excess moisture
from the cloth before wiping.
Included and Optional Accessories
Use only accessories that are specified for use with this
product. Use of unauthorized accessories creates the
risk of fire, electric shock, and personal injury.
Weld Lines
Lines may be visible on the exterior of the product.
These are “weld lines” that result from the plastic
molding process. They are not cracks or scratches.
Musical Instrument Etiquette
Always be aware of others around you whenever using
this product. Be especially careful when playing late at
night to keep the volume at levels that do not disturb
others. Other steps you can take when playing late at
night are closing the window and using headphones.
AC Adaptor Handling Precautions
Use a power outlet that is easily accessible so you
can unplug the AC adaptor when a malfunction
occurs or whenever else you need to do so.
The AC adaptor is intended for indoor use only. Do
not use it where it might be exposed to splashing or
moisture. Do not place any container, such as a
flower vase, that contains liquid on the AC adaptor.
Store the AC adaptor in a dry place.
Use the AC adaptor in an open, well-ventilated area.
Never cover the AC adaptor with newspaper, a table
cloth, a curtain, or any other similar item.
Unplug the AC adaptor from the power outlet if you
do not plan to use the Digital Piano for a long time.
Never try to repair the AC adaptor or modify it in
any way.
AC adaptor operating environment
Temperature: 0 to 40°C
Humidity: 10% to 90% RH
Output polarity:
Operating Precautions
AP700-ES-1B.indd 70 2015/04/06 12:23:07
Reference
EN-69
English
AC Adaptor Handling Precautions
Model: AD-E24500LW
1. Read these instructions.
2. Keep these instructions on hand.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this product near water.
6. Clean only with a dry cloth.
7. Do not install near radiators, heat registers, stoves, or any other source of heat (including amplifiers).
8. Use only attachments and accessories specified by the manufacturer.
9. Refer all servicing to qualified service personnel. Servicing is required after any of the following occurs:
when the product is damaged, when the power supply cord or plug is damaged, when liquid is spilled into
the product, when a foreign object falls into the product, when the product is exposed to rain or moisture,
when the product does not operate normally, when the product is dropped.
10. Do not allow the product to be exposed to dripping or splashing liquid. Do not place any object containing
liquid on the product.
11. Do not allow the electrical load output to exceed the label rating.
12. Make sure the surrounding area is dry before plugging into a power source.
13. Make sure the product is oriented correctly.
14. Unplug the product during lightning storms or when you do not plan to use it for a long time.
15. Do not allow product ventilation openings to become blocked. Install the product in accordance with the
manufacturer’s instructions.
16. Take care the power cord is located where it will not be stepped upon or bent severely, particularly in
locations close to plugs and convenience receptacles, and in locations where it exits from the product.
17. The AC adaptor should be plugged into a power outlet as close to the product as possible to allow
immediate disconnection of the plug in case of emergency.
The symbol below is an alert indicating un-insulated hazardous voltage inside the product’s enclosure, which
may be sufficient to constitute the risk of electric shock to users.
The symbol below is an alert indicating the presence of important operating and maintenance (servicing)
instructions in the documentation that accompanies the product.
*
AP700-ES-1B.indd 71 2015/04/06 12:23:07
A-1
Appendix/Apéndice
Each of the grand piano tones has its own distinctive
characteristics. Each tone has its own distinctive
merits, so you should select the tone that suits the
song you are playing along with or your own
personal preferences.
Tone List/Lista de tonos
Tone Group/
Grupo de
tonos No./Nº Tone Name/
Nombre del tono
Program
Change/
Cambio de
programa
Bank
Select
MSB/
MSB de
selección
de banco
BERLIN
GRAND
01 BERLIN GRAND 0 0
02 BERLIN GRAND
MELLOW 0 1
03 BERLIN GRAND BRIGHT 0 2
HAMBURG
GRAND
04 HAMBURG GRAND 0 3
05 HAMBURG GRAND
MELLOW 04
06 HAMBURG GRAND
BRIGHT 0 5
VIENNA
GRAND
07 VIENNA GRAND 0 6
08 VIENNA GRAND
MELLOW 0 7
09 VIENNA GRAND
BRIGHT 08
VARIOUS
PIANO
10 GRAND PIANO
MODERN 0 9
11 GRAND PIANO ROCK 0 10
12 GRAND PIANO JAZZ 011
ELECTRIC
PIANO
13 ELECTRIC PIANO 1 4 0
14 ELECTRIC PIANO 2 4 1
15 FM E.PIANO 5 0
16 60S E.PIANO 4 2
HARPSI./
VIB.
17 HARPSICHORD 6 0
18 VIBRAPHONE 11 0
STRINGS 19 STRINGS 1 49 0
20 STRINGS 2 48 0
ORGAN
21 PIPE ORGAN 19 0
22 JAZZ ORGAN 17 0
23 ELECTRIC ORGAN 1 16 0
24 ELECTRIC ORGAN 2 16 1
BASS 25 ACOUSTIC BASS 32 0
26 RIDE BASS 32 1
Tone name Description
BERLIN GRAND A well-contoured, light, chic, and
elegant tone. Superior clarity and
reverberation play of richly colored,
beautiful melodies. This tone is best for
performance of impressionistic period
music.
MELLOW Slightly more subdued BERLIN
GRAND tone.
BRIGHT Slightly brighter BERLIN GRAND
tone.
HAMBURG
GRAND
A widely expressive, richly
reverberating tone with force and
power that sounds great even in the
expanse of a concert hall. This tone is
the favorite choice of concert pianists
around the globe. This tone is suitable
for virtually any type of performance
and musical genre.
MELLOW Slightly more subdued HAMBURG
GRAND tone.
BRIGHT Slightly brighter HAMBURG GRAND
tone.
VIENNA GRAND A tone that combines powerful low
range strings and a beautifully light
touch for a broad range of expressivity,
and richly majestic sound. This tone is
best for performance of classical period
music.
MELLOW Slightly more subdued VIENNA
GRAND tone.
BRIGHT Slightly brighter VIENNA GRAND
tone.
GRAND PIANO
MODERN
A bright grand piano tone is a good
choice for dynamic and lively
performances.
GRAND PIANO
ROCK
A grand piano tone with bright
reverberation and strong attack.
Suitable for rock music.
GRAND PIANO
JAZZ
A grand piano tone with reverberation
and sound suitable for jazz music.
AP700-ES-1B.indd 142 2015/04/06 12:23:24
Appendix/Apéndice
A-2
Cada uno de los tonos de piano de cola tiene sus
características propias que los distinguen. Cada tono
se caracteriza por un valor expresivo propio, de
manera que es importante seleccionar el tono que
mejor se adapte a la canción que está acompañando
o a sus preferencias personales.
Nombre del tono Descripción
BERLIN GRAND Tono claramente definido, nítido,
exquisito y elegante. Reproducción de
hermosas melodías ricas en matices con
una superior claridad y efectos de
reverberación. Este tono es ideal para
interpretar música de la época
impresionista.
MELLOW Tono BERLIN GRAND algo más
atenuado.
BRIGHT Tono BERLIN GRAND algo más
brillante.
HAMBURG
GRAND
Con una amplia gama expresiva y rica
reverberación, el potente y fuerte
sonido llena incluso el ambiente de una
sala de concierto. Este es el tono
preferido por los pianistas de concierto
de todo el mundo. Asimismo, es el tono
adecuado para prácticamente cualquier
tipo de interpretación y género musical.
MELLOW Tono HAMBURG GRAND algo más
atenuado.
BRIGHT Tono HAMBURG GRAND algo más
brillante.
VIENNA GRAND Un tono que combina potentes cuerdas
de rango bajo con un toque
perfectamente suave para una amplia
gama de expresividad y un sonido
exquisitamente sofisticado. Es el tono
perfecto para interpretar música de la
época clásica.
MELLOW Tono VIENNA GRAND algo más
atenuado.
BRIGHT Tono VIENNA GRAND algo más
brillante.
GRAND PIANO
MODERN
El brillante tono de piano de cola es la
elección ideal para actuaciones
dinámicas, animadas.
GRAND PIANO
ROCK
Tono de piano de cola con
reverberación brillante y ataque
intenso. Adecuado para música rock.
GRAND PIANO
JAZZ
Tono de piano de cola con
reverberación y un sonido adecuado
para música jazz.
Concert Play List/
Lista de Interpretaciones de
concierto
No./Nº Song Name/Nombre de la canción
1 Piano Concerto No.1 Op.23 1st Mov.
2Prelude Op.28-15 “Raindrop”
3 Symphony No.9 “An Die Freude”
4Je Te Veux
5 Vltava (Má vlast)
6Canon
7 Sonate Op.13 “Pathétique” 2nd Mov.
8Chanson Triste
9 Jesus, Bleibet Meine Freude
10 Tableaux d’Une Exposition “Promenade”
11 Sonate K.331 1st Mov.
12 Polovetzian Dance (Prince Igor)
13 Piano Concerto No.20 K.466 2nd Mov.
14 Violin Concerto Op.64 1st Mov.
15 Melody In F
AP700-ES-1B.indd 143 2015/04/06 12:23:24
A-3
Appendix/Apéndice
The length of a Grand Piano demo song built into
this Digital Piano may be different from the length of
the original pieces it is based upon.
La duración de las canciones de demostración del
piano de cola incluidas en este piano digital puede
diferir de la duración de las piezas originales sobre
las que se basan.
Music Library List/
Lista de la biblioteca musical
No./Nº Song Name/Nombre de la canción
1 Nocturne Op.9-2
2Fantaisie-Impromptu Op.66
3 Étude Op.10-3 “Chanson de l’adieu”
4Étude Op.10-5 “Black Keys”
5 Étude Op.10-12 “Revolutionary”
6Étude Op.25-9 “Butterflies”
7 Prélude Op.28-7
8Valse Op.64-1 “Petit Chien”
9 Valse Op.64-2
10 Moments Musicaux 3
11 Impromptu Op.90-2
12 Marche Militaire 1 (Duet)
13 Frühlingslied [Lieder Ohne Worte Heft 5]
14 Fröhlicher Landmann [Album für die Jugend]
15 Von fremden Ländern und Menschen [Kinderszenen]
16 Träumerei [Kinderszenen]
17 Tambourin
18 Menuet BWV Anh.114
[Clavierbüchlein der Anna Magdalena Bach]
19 Inventio 1 BWV 772
20 Inventio 8 BWV 779
21 Inventio 13 BWV 784
22 Praeludium 1 BWV 846 [Das Wohltemperierte Klavier 1]
23 Le Coucou
24 Gavotte
25 Sonatina Op.36-1 1st Mov.
26 Sonatine Op.20-1 1st Mov.
27 Sonate K.545 1st Mov.
28 Sonate K.331 3rd Mov. “Turkish March”
29 Rondo K.485
30 Für Elise
31 Marcia alla Turca
32 Sonate Op.13 “Pathétique” 1st Mov.
33 Sonate Op.13 “Pathétique” 2nd Mov.
34 Sonate Op.13 “Pathétique” 3rd Mov.
35 Sonate Op.27-2 “Moonlight” 1st Mov.
36 Rhapsodie 2
37 Waltz Op.39-15 (Duet)
38 Liebesträume 3
39 Blumenlied
40 La Prière d’une Vierge
41 Csikos Post
42 Humoresque Op.101-7
43 Melodie [Lyrische Stücke Heft 2]
44 Sicilienne Op.78
45 Berceuse [Dolly] (Duet)
46 Arabesque 1
47 La Fille aux Cheveux de Lin [Préludes]
48 Passepied [Suite bergamasque]
49 Gymnopédie 1
50 Je Te Veux
51 Salut d’Amour
52 The Entertainer
53 Maple Leaf Rag
54 L’arabesque [25 Etüden Op.100]
55 La Styrienne [25 Etüden Op.100]
56 Ave Maria [25 Etüden Op.100]
57 Le retour [25 Etüden Op.100]
58 La chevaleresque [25 Etüden Op.100]
59 No.13 [Études de Mécanisme Op.849]
60 No.26 [Études de Mécanisme Op.849]
Grand Piano Demo Song List/
Lista de canciones de
demostración del piano de
cola
Tone Name/
Nombre del tono
Display
Text/
Texto
visualizado
Song Name/Nombre de la canción
BERLIN GRAND Berlin 1 Les jeux d’eaux à la Villa d’Este [Années
de pélerinage Troisième année S.163]
BERLIN GRAND Berlin 2 Arabesque 2
HAMBURG GRAND Hamburg 1 Polonaise Op.53 “Héroïque”
HAMBURG GRAND Hamburg 2 Valse=Ballet
VIENNA GRAND Vienna 1 Sonate Op.53 “Waldstein” 1st Mov.
VIENNA GRAND Vienna 2 Intermezzo A-dur [6 Klavierstücke
Op.118]
AP700-ES-1B.indd 144 2015/04/06 12:23:25
Function Transmitted Recognized Remarks
Basic
Channel
1 - 16
1 - 16
1 - 16
1 - 16
Default
Changed
Note
Number
0 - 127 0 - 127
0 - 127*1True voice
After
Touch
Control
Change
X
X
X
O
Pitch Bender
XO
Key’s
Ch’s
Velocity
O
9nH v = 1 - 127
O
8nH v = 0 - 127
O
9nH v = 1 - 127
X
9nH v = 0,
O
8nH v = 0 - 127
Note ON
Note OFF
Mode
Mode 3
X
Mode 3
X
Default
Messages
Altered
0, 32
1
5
6, 38
7
10
11
16
17
18
19
64
65
66
67
Bank select
Modulation
Portamento Time
Data entry LSB, MSB*2
Volume
Pan
Expression
DSP Parameter0*2
DSP Parameter1*2
DSP Parameter2*2
DSP Parameter3*2
Damper
Portamento Switch
Sostenuto
Soft pedal
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
X
X
X
O
X
X
X
X
X
X
O
X
O
O
Model AP-700 Version : 1.0
*1 : Depends on tone
*1 : Depende del tono
MIDI Implementation Chart
AP700-ES-1B.indd 146 2015/04/06 12:23:25
Function Transmitted Recognized Remarks
Basic
Channel
1 - 16
1 - 16
1 - 16
1 - 16
Default
Changed
Note
Number
0 - 127 0 - 127
0 - 127*1True voice
Program
Change
OO
0 - 127:True #
After
Touch
Control
Change
X
X
X
O
Pitch Bender
XO
System Exclusive
OO
Key’s
Ch’s
Velocity
O
9nH v = 1 - 127
O
8nH v = 0 - 127
O
9nH v = 1 - 127
X
9nH v = 0,
O
8nH v = 0 - 127
Note ON
Note OFF
Mode
Mode 3
X
Mode 3
X
Default
Messages
Altered
System
Common
X
X
X
X
X
X
: Song Pos
: Song Sel
: Tune
Aux
Messages
Remarks
X
O
X
X
X
O
O
X
: Local ON/OFF
: All notes OFF
: Active Sense
: Reset
System
Real Time
O
O
X
X
: Clock
: Commands
0, 32
1
5
6, 38
7
10
11
16
17
18
19
64
65
66
67
76
77
78
80
81
82
83
84
88
91
93
100, 101
120
121
Bank select
Modulation
Portamento Time
Data entry LSB, MSB*2
Volume
Pan
Expression
DSP Parameter0*2
DSP Parameter1*2
DSP Parameter2*2
DSP Parameter3*2
Damper
Portamento Switch
Sostenuto
Soft pedal
Vibrato rate
Vibrato depth
Vibrato delay
DSP Parameter4*2
DSP Parameter5*2
DSP Parameter6*2
DSP Parameter7*2
Portamento Control
High resolution velocity prefix
Reverb send*3
Chorus send
RPN LSB, MSB*2
All sound off
Reset all controller
Mode 1 : OMNI ON, POLY
Mode 3 : OMNI OFF, POLY
Mode 2 : OMNI ON, MONO
Mode 4 : OMNI OFF, MONO
O : Yes
X : No
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
X
X
X
O
X
X
X
X
X
X
O
X
O
O
X
X
X
X
X
X
X
X
O
X
X
X
X
O
*2
Model AP-700 Version : 1.0
*2: For details, see MIDI Implementation at
http://world.casio.com/.
*3: This Instrument treats a hall simulator as a
reverb.
*2: Si desea más información, vea Implementación
MIDI en http://world.casio.com/.
*3: Este instrumento considera al simulador de salas
como una reverberación.
AP700-ES-1B.indd 2 2015/04/06 12:22:55
AP700-ES-1B
EN/ES
USER’S GUIDE
GUÍA DEL USUARIO
Please keep all information for future reference.
Por favor guarde toda la documentación para futuras consultas.
Safety Precautions
Before trying to use the piano, be sure to read
the separate “Safety Precautions”.
Precauciones de seguridad
Antes de intentar usar el piano, asegúrese de
leer las “Precauciones de seguridad” separadas.
EnglishEspañol
AP-700
This recycle mark indicates that the packaging conforms to
the environmental protection legislation in Germany.
Esta marca de reciclaje indica que el empaquetado se
ajusta a la legislación de protección ambiental en Alemania.
MA1504-B Printed in China
C
AP700-ES-1B.indd 1 2015/04/06 12:22:55
20

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Casio AP-700 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Casio AP-700 in de taal/talen: Engels, Spaans als bijlage per email.

De handleiding is 2,22 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Casio AP-700

Casio AP-700 Gebruiksaanwijzing - Nederlands - 76 pagina's

Casio AP-700 Gebruiksaanwijzing - Deutsch - 76 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info