583350
1
Verklein
Vergroot
Pagina terug
1/5
Pagina verder
Operation Guide 2607 2637 2687
1
MO0306-EA
Getting Acquainted
Congratulations upon your selection of this CASIO watch. To get the most out of your
purchase, be sure to carefully read this manual and keep it on hand for later reference
when necessary.
Expose the watch to bright light to charge its battery before using it.
You can use this watch even as its battery is being charged by exposure to bright
light.
Be sure to read “Battery” of this manual for important information you
need to know when exposing the watch to bright light.
If the display of the watch is blank...
If the sleep indicator (S /SLEEP ) is on the display, it
means that the display is blank because the watch’s
Power Saving function has shut it to conserve power.
Power Saving automatically turns off the display and
enters a sleep state whenever your watch is left in an area
where it is dark for a certain period.
The initial factory default setting is Power Saving on.
The watch recovers from the sleep state if you move it to
a well-lit area
*
, if you press any button, or if you angle
the watch towards your face for reading.
*
It can take up to two seconds for the display to turn on.
See “Power Saving Function” for more information.
Sleep indicator
About This Manual
The operational procedures for Modules 2607, 2637 and 2687 are identical. All of
the illustrations in this manual show Module 2607.
Button operations are indicated using the letters shown in the illustration.
Each section of this manual provides you with the information you need to perform
operations in each mode. Further details and technical information can be found in
the Reference section.
Module 2607
Module 2637
(Light)
(Light)
Module 2687
(Light)
General Guide
Press C to change from mode to mode.
In any mode, press L to illuminate the display.
Stopwatch Mode
Timekeeping Mode
Alarm Mode
Press C.
World Time Mode
Time Recorder Mode
Timekeeping
Use the Timekeeping Mode to set and view the current time and date.
The watch is equipped with a Time Recorder feature that lets you record the current
Home City time (month, day, hour, minutes, seconds, and DST on/off setting) with
the touch of a button. See To record a Time Recorder time for more information.
Pressing D displays the Last Signal screen (date and time that the time calibration
signal was last received) in the Timekeeping Mode.
Last Signal Screen
Press D.
Day of week
Receive time
Month Day
Hour : Minutes Seconds
PM
indicator
Receive date
Current Time Setting
This watch automatically adjusts its time setting in accordance with a time calibration
signal. You can also perform a manual procedure to set the time and date, when
necessary.
Before using the watch in Western Europe, first use the procedure under Setting Up
the Watch for Use in Western Europe to set the time in accordance with a time
calibration signal.
Note that after you set your Home City (the city where you normally use the watch)
code, you must also turn on the watchs time calibration signal receiver if you want to
enable auto time calibration. See About Auto Receive for more information.
See Setting the Time and Date Manually for information about manual settings.
Setting Up the Watch for Use in Western Europe
You need to make the following three settings before using this watch in Western
Europe. The following provides a general overview of the setting procedure. For full
details, see Setting the Time and Date Manually and Time Calibration Signal
Reception.
Specify the city code for your Home City (the city where you will normally use the
watch).
Select the auto Daylight Saving Time (summer time) setting.
Perform the manual time calibration signal receive operation to set the current time.
To set up the watch for use in Western Europe
1. In the Timekeeping Mode, hold down A until the city
code starts to flash, which indicates the setting screen.
2. Use D(+) and B() to select the city code you want to
use as your Home City.
The following are the city codes for major cities in the
Western Europe time zones.
City code
BER and PAR : Berlin, Paris, Milan, Rome,
Amsterdam, Hamburg,
Frankfurt, Vienna
LON: London
3. Press C and the Daylight Saving Time (summer time)
setting screen appears.
4. Use D to select AUTO (auto DST).
Auto DST specifies auto switching between Daylight
Saving Time (DST) and Standard Time.
5. Press A twice to exit the setting screen.
6. Hold down D for about two seconds until the watch
beeps.
Release D and the message RC! appears to indicate
that signal reception has started.
Time calibration signal reception takes from two to six
minutes. Take care that you do not move the watch
during this time.
Receiving indicator
When getting ready to receive the time calibration signal, position the watch as
shown in the nearby illustration, and place it near a window in a location where there
are no nearby metal objects.
The watch should not be on its side or facing the wrong way.
See the information under Time Calibration Signal Reception Precautions if you
experience problems with time calibration signal reception.
Resin Band
Metal Band
After signal reception is complete, the display of the watch changes to the Last
Signal screen.
Time Calibration Signal Reception
This watch is designed to pick up a time calibration signal and update its time setting
in accordance with the signal. There are two different methods you can use to receive
the signal: Auto Receive and Manual Receive. With Auto Receive, the watch
automatically receives the calibration signal four times each day and makes
appropriate adjustments. With Manual Receive, you perform a specific button
operation to receive the calibration signal.
This watch is able to receive the time calibration signal
transmitted from Mainflingen, Germany (located 25
kilometers southeast of Frankfurt). Signal reception is
possible within the area represented by a circle with a
radius of about 1000 kilometers.
At distances further than about 500 kilometers, the
signal may become weak and reception may be
impossible under certain conditions.
Signal reception may be poor in the shaded area on the
map, even though it is within 1,000 kilometers of the
signal transmitter.
Frankfurt
Note
If you are using the time calibration signal to set the time for this watch, be sure to
correctly set your Home City. Otherwise, there is the chance that the watch will not
set the correct time. See Setting the Time and Date Manually for details.
Note that signal reception is possible only when the watch is within range of a time
calibration signal transmitter, and BER, PAR , LON, or ATH is selected as the Home
City code.
See City Code Table for a complete list of available city codes.
The current time setting in accordance with the time calibration signal takes priority
over any time settings you make.
Auto receive is turned on when the watch is shipped from the factory.
See the information under Time Calibration Signal Reception Precautions if you
experience problems with time calibration signal reception.
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Casio 2687 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Casio 2687 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,83 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Casio 2687

Casio 2687 Gebruiksaanwijzing - Nederlands - 8 pagina's

Casio 2687 Gebruiksaanwijzing - Deutsch - 6 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info