586704
5
Verklein
Vergroot
Pagina terug
1/7
Pagina verder
USER’S GUIDE 2412
5
COM
1
:
58
INFRA RED
INFRA RED
After about
one second
COM.MENU
WatchPC
Other (PDA, etc.)
Portable game device
COM.MENU
SEND
RECEIVE
IR Mode
Use the IR Mode to exchange data between two watches or between your
watch and computer, or some other device.
The following shows compatibility of data communication between this watch
and other CASIO Wrist Camera Models.
Note
An infrared adapter or an IR port is required to exchange data with this watch.
The following procedure covers data communication between two watches
only. See the CD-ROM that comes with the watch and the documentation that
comes with the infrared adapter for information about data communication with
a computer.
Exchanging Data Between Two Watches
To exchange data between two watches, orient the watches as shown above.
The 10cm (4 inches) and 30-degree maximums shown in the above
illustration apply only when the watches are pointed straight at each other.
The maximum allowable distance may be less if either watch is at an angle
(not pointed straight).
At an angle of 15 degrees or more, you may need to move the two watches
very close to each other.
To enter the IR Mode
In the Timekeeping Mode, press D twice to enter the IR Mode.
An initial screen appears for about one second, followed by the
COM. MENU screen.
To send an image
1.On the COM. MENU screen, use B or E to
select watch ( ).
2. Press F to display the watch-to-watch send
menu.
3. Press C to display the image selection screen.
Each press of C toggles between the image and
the send menu.
The watch automatically returns to the send
menu if you leave an image on the display for
about five seconds.
10cm (4 inches) maximum
15 degree maximum
SEND
2‰‰1. 6.3‰.P1‰:58
Wrist Camera Model
WQV-3 series (Module 2411)
WQV-1/WQV-2 series
(Module 2220)
Communication with this watch
Supported
Not supported (different protocol)
4.Use E(+) and B (–) to scroll through the images
and display the one you want to send.
SEND is displayed in the upper left corner of the
image screen.
You can send only one image at a time between
watches.
5.Align the IR ports of the two watches with each
other.
Put the receiving watch into receive standby at
this time. See “To receive an image” for more
information.
SEND
OK
SEND
6.On the sending watch, press F to send the
displayed image.
The data send screen shown nearby appears
while an image send operation is in progress.
The message OK appears momentarily after the
image send operation is complete. Next, the
watch returns to the send menu.
Pressing A during the above procedure displays
the COM. MENU screen.
After you are finished sending images, press D
to return to the Timekeeping Mode.
To receive an image
1.On the COM. MENU screen, use B or E to
select watch ( ).
2.Press F to display the watch-to-watch send
menu.
3.Press E to display the watch-to-watch receive
menu.
Pressing B returns to the watch-to-watch send
menu.
4.Press F to enter receive standby.
5.Align the IR ports of the two watches with each
other, and perform the send operation on the
sending watch.
See “To send an image” for more information.
The message OK appears momentarily, followed
by the received image. Next, the watch returns to
the receive menu.
Pressing A during the above procedure displays
the COM. MENU screen.
After you are finished receiving images, press D
to return to the Timekeeping Mode.
SEND
RECEIVE
Communication Errors
Screen messages appear in the IR Mode to let you know when there is a
problem with data communication. When this happens, check the following to
find out what you need to do. Also, you can avoid data communication
problems by carefully observing the advice under “Communication
Precautions”.
Communication Screen Messages
Other Messages
Communication Precautions
The two IR ports must be within 10cm (4 inches) and 30 degrees of each
other.
Proper data communication may also be impossible if the two IR ports are
too close to each other.
At an angle of 15 degrees or more, you may need to move the two IR ports
very close to each other.
Do not move the watch while communication is in progress.
Make sure there is nothing between the two IR ports that blocks the path of
the IR signal.
Infrared communication may not be possible in areas where lighting is bright,
near a window, etc.
In the case of inverter fluorescent lighting or other very strong light, try
turning off the light or move to an area where light is not shining directly onto
the infrared ports.
An unrelated nearby IR data communication operation can interfere with
proper IR data communication.
The maximum allowable distance between the IR ports may be less than
10cm when watch battery power is low.
The watch automatically returns to the COM. MENU screen about five
minutes after the image selection screen or receive standby screen is
displayed. If the point where five minutes elapse occurs while a data send/
receive operation is in progress, the operation continues until it is complete,
after which the watch automatically returns to the COM. MENU screen.
ERROR SEND
(Sender),
ERROR RECEIVE
(Receiver)
MEMORY FULL
Data send or receive failed for some reason.
Tr y again.
Memory of the receiver is full. Delete data you
no longer need and try again.
Something is interfering with proper data
communication. Correct the cause of the
problem. If data communication is not restored
within about 25 seconds, ERROR appears on
the display.
SEND
RECEIVE
(Receiver)
(Sender)
CHECKING DATA
REC ERROR
This message appears when an image is being
processed after data is received.
Data cannot be saved because some problem
occurred while accessing flash memory.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Casio 2412 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Casio 2412 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,15 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Casio 2412

Casio 2412 Gebruiksaanwijzing - Deutsch - 27 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info