799650
5
Verklein
Vergroot
Pagina terug
1/39
Pagina verder
- For sawing on a curve, use the special “curved
cut” blade, which is thin enough to saw along a
curve.
PERFORATING WOOD (FIG 5)
- To perforate wood, there are two possibilities:
- 1. Drill a hole and begin sawing from that point.
- 2.Use the following technique (see fig. 5):
- Place the jig-saw on the rounded edge loca- ted
at the front of the bottom plate.
- Turn on the saw and slowly lower it until it
touches the material to be sawed.
- Once the material has been perorated, return
the saw to its normal position and continue
sawing.
ONCE YOU HAVE FINISHED
USING THE APPLIANCE
- Stop the appliance by releasing the pressure on the
on/off switch.
- Unplug the appliance from the mains.
- Clean the appliance.
MAINTENANCE AND CARE
- WARNING! Always unplug the machine before
carrying out work on it.
- Checking the saw blade: deposits of resin and glue
on the saw blade cause inefficient cutting. To avoid
them, always clean the blade immedi- ately after use.
- Inspect the mounting screws: regularly inspect all
the mounting screws and ensure they are firmly
tightened. Should any screw be loose, tighten it
immediately. Failure to do so could put you at serious
risk.
- The vents should always be kept clean and free of
obstacles.
- Check that the mains lead is in good condition. If it is
not, take it to an Official Service Centre to have it
replaced.
CLEANING
- Disconnect the appliance from the mains and allow
it to cool before undertaking any cleaning task.
- Clean the equipment with a damp cloth with a few
drops of washing-up liquid and then dry.
- Do not use solvents, or products with an acid or base
pH such as bleach, or abrasive products, for cleaning
the appliance.
- Never submerge the appliance in water or any other
liquid or place it under running water.
- If the appliance is not in good condition of
cleanliness, its surface may degrade and inexorably
affect the duration of the appliance’s useful life and
could become unsafe to use.
SUPPLIES
- Supplies can be acquired from distributors and
authorised establishments (such as filters, etc.) for
your appliance model.
- Always use original supplies, designed specifi- cally
for your appliance model.
ANOMALIES AND REPAIR
- Take the appliance to an authorised technical
support service if product is damaged or other
problems arise. Do not attempt to disassemble or
repair the appliance yourself as this may be dangerous.
- If the connection to the mains has been dama- ged,
it must be replaced, take the appliance to an
authorised technical support service. Do not attempt
to disassemble or repair the appliance by yourself in
order to avoid a hazard.
SPECIFICATIONS
- Rated power 400W
- Rated voltage 220-240V
- No load speed 3000 rpm
- Wood cutting Capacity 55mm
- Steel cutting Capacity 4mm
- Aluminum cutting capacity 8mm
- Slant up to: 45º
- Weigth 1,37Kg
- Sound pressure level < 85 dB(A)
- Sound power lvl < 96dB(A)
- Vibration < 10.85 m/s2
- NB: These specifications are subject to change
without notice of purpose of improvement.
- Measured sound level determined according EN
60745-1
- The vibration emission level given in this infor-
mation sheet has been measured according EN 60745-
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Casals SA400 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Casals SA400 in de taal/talen: Alle talen als bijlage per email.

De handleiding is 1.1 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info