550542
15
Verklein
Vergroot
Pagina terug
1/26
Pagina verder
15
Display of position
Autonomous and Pace Car
1
8
2
7
3
6
4
5
1
Position
Tower
30357
1
8
2
7
3
6
4
5
3
1
8
2
7
6
4
5
2
(only in combination with Position Tower #30357)
The position of the Autonomous Car (address 7) and of the Pace
Car (address 8) can be displayed at the Position Tower. This func-
tion can be activated at the Control Unit. Therefore switch off the
Control Unit and keep the “BRAKE” button
6
pushed, fig.
2
,
switch on the racetrack and release the “BRAKE” button again. By
pushing the button again the function may be changed:
1 LED lights = no display
2 LEDs light = display at the Position Tower
Set the function requested and confirm your choice via “START/
ENTER”.
Setting of the
cars´ basic speed
1 – 10 1 – 10
1 2
1
8
2
7
3
6
5
4
1
8
2
7
3
6
4
5
3
6
1
8
2
7
3
6
4
5
5
The setting of the basic speed can be effected individually for one
and/or several cars. The cars which are to be adjusted have to be
positioned on the track. The setting can be carried out on 10 levels
with the 5 LEDs indicating the different levels by flashing or perma-
nent lighting.
1
1 LED lights = low speed
2
5 LEDs light = high speed
Switch on the Control Unit, place the cars to be adjusted on the
track and press “SPEED”
5
once. A certain number of LEDs will
now light, showing the speed level last used. Push the “SPEED”
button
5
as many times until you have reached the speed desired.
Confirm by pressing “ENTER/START”
3
. A short running light and
the lighting of the middle LED confirms completion of the setting,
fig.
6
.
Setting of cars´
braking performance
1 – 10
1 – 10
1 2
1
8
2
7
3
6
5
4
1
8
2
7
3
6
4
5
3
6
1
8
2
7
3
6
4
5
5
(only for cars operated with speed controllers)
The setting of the braking performance can be effected individually
for one and/or several cars. The cars which are to be adjusted have
to be positioned on the track. The setting can be carried out on 10
levels with the 5 LEDs indicating the different levels by flashing or
permanent lighting.
1
1 LED lights = low braking effect
2
5 LEDs light = high braking effect
Switch on the Control Unit, place the cars to be adjusted on the
track and press “BRAKE”
6
once. A certain number of LEDs will
now light, showing the brake step last used. Push the “BRAKE” but-
ton
6
as many times until you have reached the braking perfor-
mance desired. Confirm by pressing “ENTER/START”
3
. A short
running light and the lighting of the middle LED confirms completion
of the setting, fig.
6
.
Setting fuel tank capacity
1 – 10
1 – 10
1 2
1
8
2
7
3
65
4
1
8
2
7
3
6
4
5
3
6
1
8
2
7
3
6
4
5
5
(only for cars operated with speed controllers)
The setting of the fuel tank capacity in combination with the Pit Lane
(30356) is effected for all cars simultaneously. The setting can be
carried out on 10 levels with the 5 LEDs indicating the different lev-
els by flashing or permanent lighting.
1
1 LED lights = low fuel capacity
2
5 LEDs light = full tank
Switch on the Control Unit, place the cars to be adjusted on the
track and activate the fuelling function by means of the slide switch
2
, fig.
3
. Press the “FUEL” button
7
once. A certain number of
LEDs will now light, showing the fuel capacity last used. Push the
“FUELbutton
7
as many times until you have reached the fuel
capacity desired. Confirm by pressing “ENTER/START”
3
. A short
running light and the lighting of the middle LED confirms completion
of the setting, fig
6
.
Extended fuelling function
You can choose between 3 modes via the sliding switch
2
,
fig.
3
:
OFF = cars don´t consume any “petrol”
ON = cars consume “petrol”
REAL = maximum speed depending on fuel tank capacity / cars
consume “petrol”) (only in combination with Pit Lane 30356 or Pit
Stop Lane 30346 and Pit Stop Adapter Unit 30361)
When driving in “REAL-mode” the car with a full tank is “heavier”,
drives slowlier and shows a lower braking effect; a car with an empty
tank is “lighter”, drives faster and shows a higher braking effect. The
current fuel tank capacity and the “fuel consumption” can only be
displayed in combination with the Driver Display 30353 and Pit Stop
30356.
Refuelling of cars with Pit Lane 30356
and Driver Display 30353
Pit Lane 30356 Driver Display 30353
87
9 10
The car´s present tank capacity can be read via the bar display with
5 green and 2 red LEDs at the Driver Display. For refuelling drive
your car into the Pit Lane across the refuelling sensor fig.
7
. The
bar display now starts to flash, fig.
8
, and the car can be refuelled
by keeping the lane-change button pushed. fig.
9
. The number of
refuellings are indicated by flashing or lighting of the yellow LEDs,
fig.
10
(also see Driver Display).
Note: cars with an empty tank are disregarded for lap-counting
in combination with Position Tower 30357.
Setting of tank capacity at the start of the race
Pit Lane 30356 Driver Display 30353
1
8
2
7
3
6
4
5
11 12
1413
(only in combination with Pit Lane 30356 and Driver Display 30353)
Irrespective of the basic setting of the tank capacity it is possible
to individually set the tank capacity for one or several cars at the
race´s start for the number of laps till the first pit stop. Push “START/
ENTER” once
3
; the 5 LEDs at the Control Unit will light perma-
nently, fig.
12
, and the Driver Display´s bar display will flash, fig.
13
.
Clicking the lane-change button at the corresponding speed control-
ler enables you to change the fill level, fig.
14
.
15

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Carrera Digital 124 - 23613 GENTLEMEN RACE bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Carrera Digital 124 - 23613 GENTLEMEN RACE in de taal/talen: Duits, Engels, Frans als bijlage per email.

De handleiding is 9,18 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info