469912

Carrera DIGITAL 124-30342 Lapcounter Handleiding

3
Verklein
Vergroot
Pagina terug
1/4
Pagina verder
8
Assembly instructions
1 4
2 3
1
+
2
+
3
Before assembling please insert the connecting clips
in the track as shown in fi gure
1
. Stick tracks together on a fl at
base. Move the connecting clips according to fi gure
2
in direction
of the arrow until they audibly snap in. The connecting clip may also
be inserted later. The connecting clips can be removed into both
directions by simply pressing down the clamped nose (see fi g.
3
).
4
Fastening: To fasten the track sections on a board, it is neces-
sary to use the track section fasteners (Item no. 85209, not con-
tained in the package).
Note:
Carpeting is not a suitable foundation on which to build the track be-
cause of static charging, formation of fl uff and ready infl ammability.
Coding/decoding of the cars to
the according speed controller
2x CLICK
1 2
2x CLICK
CK
3
Place car on the track, push lane-change-button twice fi g.
1
, lift car
at the front, put car back again fi g.
2
, while car´s lights are fl ashing
push lane-change-button twice fi g.
3
. Programming is confi rmed
by a tone. All settings are saved until new programming is carried
out.
False start
False start: If a car’s speed controller is actuated during the traffi c
light phase, this is rated as false start. The vehicle that has caused
the false start will travel a short distance and the LED on the rele-
vant vehicle or hand control will fl ash. The race is not released and
the start has to be repeated.
Display and
range of functions
1 2
3
4
Range of functions
1
Training mode
2
Lap races possible from 0 – 9999 laps (factory setting 50 laps)
3
Time races from 00:00:00’01 – 99:99:99:999 hours
(hh:mm:ss’ms) (factory setting 00:05’00’’00)
The electronic lap counter Carrera DIGITAL 124 / 132 disposes of a
memory function. Once the values of the factory setting are changed
the altered values remain displayed until having been reset.
4
Signal tone and fanfare horn may be switched on and off by ac-
tivating the switch (ON/OFF).
Training mode
1
Training mode
The training mode is used for training and the starting positions for
the race and can be started without setting the laps or time.
The training mode is set as follows:
1. Switch on the Black box (ON/OFF switch).
2. After approx. 1 second the central LED will illuminate perma-
nently and a brief acoustic signal will sound.
3. The Carrera DIGITAL 124 / 132 electronic lap counter automati-
cally switches on in training mode.
4. Press the start button of the Black Box once – all of the LEDs
are constantly lit.
5. Place the pre-coded car/s on the connecting track.
6. Then press the start button again – the starting sequence is initi-
ated, the LEDs are lit and acoustic signals can be heard.
7. The training run begins with elapse of the starting sequence and
the overall time (“TIME”) and counting begins.
8. The display shows the following information:
• Allocation of the individual cars (1-6)
• Total time of training race next to “TIME”
• Lap time currently driven “LAP TIME”
ATTENTION!
Single lap times exceeding 09:59:999 cannot be displayed, illustra-
tion see fi g.
1
.
This does not aff ect the total time illustration under
“TIME”.
While pushing BUTTON 1 during measuring, further information can
be retrieved.
• Press “BEST TIME” 1x – best lap time. Only beating the current
best time will again be displayed.
• Press “TIME” 2x – displaying the leading car (POS 1) and the other
cars´ time lag to the leading car
< 1 lap:
display of time diff erence “+ m:ss:ms” to the leading car
> 1 lap:
display of lap diff erence to the leading car “+ L 00001”
• Press “POSITION” 3x – current positioning of individual cars
• Press “LAPS” 4x – laps already driven
• Press 5x – change back to the current training race
9. For fi nishing the training race, push BUTTON 3 (“ESC”) once
during the race. You will return to the main menu (the word “TRAIN-
ING” fl ashes)
Race modes
Racing mode
1. For being able to switch to the racing mode after the electronic lap
counter Carrera DIGITAL 124 / 132 has automatically turned on via
the Black Box, please push BUTTON 3 (“ESC”).
2. The next display indication allows you to switch between the train-
ing- and the racing mode while pushing BUTTON 1 (“CHA”).
3. Confi rm selection of the racing mode (the word “Race” fl ashes) by
BUTTON 2 (“SEL”), the word “LAP” fl ashes.
4. You have the choice between
1
lap race and
2
time races.
1
Lap Races
1.
If you like to start a lap race (“LAP”) please confi rm by pushing
BUTTON 2 (“SEL”).
2.
After confi rmation you may set the number of laps you like to com-
plete (it is possible to set lap races from 0000 to 9999 laps, factory
setting 0050 laps).
3.
Basically you have to set the 1`s place fi rst, then the 10`s place
and the 100`s place and fi nally the 1000`s place (display cursor
fl ashes on each place). By pushing BUTTON 1 (“UP”) you increase
the number. In order to change to the next places please push BUT-
TON 2 (“SEL”) and set the value as described. In case the preset
number of laps shall not be changed, please confi rm by pushing
BUTTON 2 (“SEL”) until the lap display disappears.
4.
After having set the number of laps push the start button of the
Black Box once – alle LEDs will fl ash permanently.
5. Place the pre-coded car/s on the connecting track.
6. Then press the start button again – the starting sequence is initi-
ated, the LEDs are lit and acoustic signals can be heard.
7. The lap race starts after the start sequence has proceeded.
8. The total time “TIME” starts to run. Once the leading car has
passed through, its total time is displayed and updated upon each
passing.
9. The display shows the following information:
• Allocation of the individual cars (1-6)
• Total time of the leading car next to “TIME”
• Lap time currently driven “LAP TIME”
While pushing BUTTON 1 during measuring, further information can
be retrieved.
• Press “BEST TIME” 1x – best lap time. Only beating the current
best time will again be displayed
• Press “TIME” 2x – displaying the leading car (POS 1) and the
other cars´ time lag to the leading car
< 1 lap: display of time diff erence “+ m:ss:ms” to the leading car
> 1 lap: display of lap diff erence to the leading car “+ L 00001”
• Press “POSITION” 3x – current positioning of individual cars
• Press “LAPS” 4x – laps still to go
• Press 5x – change back to the current race
10. As soon as all cars have fi nished the last lap a signal indicating
the end of the race is audible and the display starts to fl ash.
11. For returning to the main menu push BUTTON 3 once („ESC“)
1
Time Racing
1. In order to measure the time of a time race please follow steps
1-3 (see lap races).
2. To start a time race after mode selection lap race (“RACE”) push
BUTTON 1 (“CHA”) for changing from the lap race mode (“LAP”) to
the time race mode (“TIME”).
3. Confi rm selection of time race (“TIME”) by BUTTON 2 (“SEL”).
4. After confi rmation the seconds´ position of the time display will
fl ash (factory setting 00:05:00 min.).
5. Basically you have to set the seconds fi rst, then the minutes
and fi nally the hours (display cursor fl ashes on each position). By
pushing BUTTON 1 (“UP”) you increase the number. In order to
change to the next positions please push BUTTON 2 (“SEL”) and
set the value as described. In case the preset racing time shall not
be changed please confi rm by pushing BUTTON 2 (“SEL”) until the
ltime display disappears.
6. After having set the requested time for the race push the start but-
ton of the Black Box once – alle LEDs will fl ash permanently.
7. Place the pre-coded car/s on the connecting track.
8. Then press the start button again – the starting sequence is initi-
ated, the LEDs are lit and acoustic signals can be heard.
9. The time race starts after the start sequence has proceeded.
10. The total time “TIME” starts to run backwards.
11. The display shows the following information:
• Allocation of the individual cars (1-6)
• Total time still to be driven “TIME”
• Lap time currently driven “LAP TIME”
While pushing BUTTON 1 during measuring, further information can
be retrieved
12. After the total time set has expired the race is fi nished. A signal
will be audible and the display starts to fl ash.
13. For returning to the main menu push BUTTON 3 once (“ESC”)
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Carrera DIGITAL 124-30342 Lapcounter bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Carrera DIGITAL 124-30342 Lapcounter in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Turks, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 0,9 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info