551014
13
Verklein
Vergroot
Pagina terug
1/116
Pagina verder
21
13
1
2
1
2
2
1
2
3
4
5
8
6
9
7
10
11
13
12
1
4
2
3
1
5
14
15
16
17 17
18
Please make sure that you charge the provided
7.4 V
650 mAh
Li-ion rechargeable
battery only with the provided
8.4 V
1000 mA
Li-ion battery charger. In case you try
to charge the rechargeable battery with a different Li-ion battery charger or any other
battery charger, this might cause serious damages. Please carefully read the previous
chapter about warnings and guidelines on the usage of rechargeable batteries before
proceeding.
Please proceed as follows when charging the rechargeable battery in the helicopter
with the appropriate battery charger:
Connect the battery charger to the power socket. The green LED on the power
supply unit indicates that the charger has correctly been connected to the power
socket or that the rechargeable battery has been fully recharged.
Connect the rechargeable battery in the helicopter to the charger. The green LED
on the power supply unit indicates that the charger has correctly been connected to
the power socket or that the rechargeable battery has been fully recharged
Has the discharged battery been inserted correctly, the red LED on the charger will
light up to indicate that the battery is now being recharged.
It takes approximately 1 hour to recharge a discharged battery (not exhaustively
discharged). As soon as the battery is completely charged the LED on the charger
lights up green.
Undo the plugged connection between the helicopter and the charger unit.
In order to fly after charging, make the plugged connection to be found on
the helicopter.
Undo the plugged connection on the helicopter if you are not going to use the
helicopter. Failure to observe this precaution may cause battery damage!
Note: when supplied, the li-ion-battery is already partially charged. so the first charg-
ing cycle may well take less time.
Open the battery compartment with a
screwdriver and insert the batteries in
the remote control. Please keep in mind
the correct polarity. After having closed
the compartment you can check all
functions of the remote control with the
help of the power-switch on the front.
With the power-switch turned ON and
proper functioning, the top center LED
on the remote control will light up red.
When the control LED flashes rapidly,
the batteries in the controller must be
changed.
Recharging the Li-ion rechargeable battery
1. Antenna
2. Power switch (ON / OFF)
3. Control LED
4. Gas · tail (spinning in circles)
5. Trimmer for gas
6. Trimmer for tail
7. Forward/backward
right/left pitch
8. LCD display
9. UP-button (UP)
10. DN-button (DN)
11. Select button (SEL)
12. Menu-button (Menu)
13. Beginner / Advanced mode
(press the right joystick on the con-
troller down vertically from above)
14. Trimmer for forward/backward
15. Trimmer for right/left pitch
16. Battery compartment
17. Slot for keeping
Joystick extensions
18. Joystick extensions
to screw on lever 4. & 7.
Range of functions of the remote control
Left side
Right side
1. Rotor system
2. Tail rotor
3. Plugged connection for
charging the li-ion battery
4. Landing skids
5. ON-/OFF switch
Description of helicopter
Inserting the batteries
in the remote control
13

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Carrera 501006 Spider Fox bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Carrera 501006 Spider Fox in de taal/talen: Alle talen als bijlage per email.

De handleiding is 5,97 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Carrera 501006 Spider Fox

Carrera 501006 Spider Fox Aanvulling / aanpassing - Deutsch, English, Français - 2 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info