667724
7
Verklein
Vergroot
Pagina terug
1/14
Pagina verder
4.3 AUDIO SOURCES AND PRIORITIES
If two connected audio sources try to play simultaneously, your
scala rider automatically determines which audio source to play
through the speakers based on the priority of the connected devices.
Higher Priority
1. Mobile Phone audio or GPS instructions*
2. Intercom / Click-to-Link
3. A2DP (Stereo Bluetooth) audio
4. FM Radio (Built-in)
5. AUX (for corded connection i.e. Music Players)
* GPS instructions from Smartphone GPS Apps
are prioritized like A2DP audio
Lower Priority
Incoming mobile phone calls interrupt ongoing intercom calls
• Incoming intercom calls will interrupt ongoing A2DP music
Intercom and Click-to-Link calls have the same priority. So
Click-to-Link calls will not interrupt any Intercom call in progress,
and vice-versa.
A2DP audio priority can be congured to be higher than Intercom audio
priority (see section 3).
4.4 VOICE CONNECT VOX SETTINGS
The scala rider oers VOX technology for safe and hands-free
operation of some key functions.
VOX Activation Speak any word loudly into the microphone
Answer a call Speak any word loudly into the microphone
Reject a call Remain silent for about 15 seconds
VOX Sensitivity
(Default:
Medium)
See section 3 to adjust settings.
High: Use this setting if it is dicult to activate VOX
Low: Use this setting if it is too easy to activate VOX
Enable/Disable
VOX (For
Intercom/Voice
Command only)
In Standby, press and simultaneously for 2 seconds
• Enable: Blue ash for 2 seconds
• Disable: Red ash for 2 seconds
5. INTERCOM
The scala rider Q3 allows Bike-to-Bike full duplex intercom
communication at a range of up to 1 km / 3,200 ft (subject to
terrain) within line of sight. The Q3 is capable of toggling with
three other riders using Intercom Channels A, B and C.
Pairing with another scala rider
To chat with another scala rider via Intercom, pair your scala rider Q3
to the second device. Pairing is a one-time process. Once paired, the
two units will automatically recognize each other whenever in range.
5.1 INTERCOM COMPATIBILITY
Your scala rider Q3 is compatible with most scala rider models
for intercom calls. In addition, it is also compatible with the
Schuberth SRC-System. Intercom range with other models is
limited to the distance of the device with the shorter range.
For details on how to pair and use your Q3 with other scala rider
models, please visit www.cardosystems.com/Q3compatibility.
5.2 PAIRING INTERCOM CHANNELS
Pairing a Channel will replace any existing paired device on that Channel
with the new device.
If you have purchased the Q3 MultiSet, the retail package contains two
pre-paired units congured to communicate via their
v
buttons on
Channel A.
If for any reason you have to pair them again, OR if you wish to pair
another unit, proceed as follows:
1. Check both scala riders are in Standby.
2. On the rst unit, press
v
for 5 seconds. Once the LED begins
ashing, select the intercom channel you would like to pair by
tapping
v
(Channel “A” pairs automatically).
6
| scala rider
®
Q3 / Q3 MultiSet™
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Cardo Scala Rider Q3 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Cardo Scala Rider Q3 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,41 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Cardo Scala Rider Q3

Cardo Scala Rider Q3 Gebruiksaanwijzing - Nederlands - 16 pagina's

Cardo Scala Rider Q3 Gebruiksaanwijzing - Deutsch - 16 pagina's

Cardo Scala Rider Q3 Gebruiksaanwijzing - Français - 16 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info