680508
13
Verklein
Vergroot
Pagina terug
1/216
Pagina verder
Magic 1000 N000925 12/2010 11 / 214
Deleting (all) remote transmitter(s):
During one of the 3 status messages A, B or C (seeChapter
10), press the pushbuttons and simultaneously for >6
seconds, FL flashes in the display. The status message
reappears after 3 seconds.
CAUTION: Mishandling the product can result in
injuries or material damage. Follow the basic safety
rules:
When opening or closing the door, do not block the interior or
exterior swivel ranges. Keep children away.
The door movements can be activated or stopped using the
remote transmitter provided or via switching elements such
as the wall keypad, which can be connected if desired.
Optional external features (such as the EMERGENCY
STOP) can also be connected to the door operator.
The operator must be connected to a door before
it is used. If it is not, incorrect load values will be
taught in to the electronic system. This can cause
malfunctions.
Switch on programming mode
During one of the 3 status messages A, B or C (seeChapter
10) press the Menu pusbutton for longer than 1.5
seconds. The display changes to the menu (D).
Select programming menu
Select the desired menu with the pushbuttons and .
Show / change menu value
Displays: Press the Menu pushbutton for less than 1.5
seconds, the menu value (E) is displayed.
Change: Change the value with the pushbuttons and .
Save: Press the Menu pushbutton for less than 1.5
seconds, the programming menu (D) is displayed.
Exit programming mode
Press the Menu pushbutton for longer than 1.5 seconds,
the display changes to the status message, changes are
saved.
If no key is pressed within 15 seconds during programming, it
automatically exits the programming mode.
ATTENTION: If the values of the programming
menu A0 to A4 are changed, the load switch-off no
longer provides any protection! Teach the door operator in
again before re-commissioning. For this carry out Teaching in
the door operator (Chapter 15) .
17 Operation
18 Programming
Factory setting
Menu
Function, setting range, unit
A0 Length SOFT RUN OPEN in 7cm
000..009
002
A1 Length SOFT RUN CLOSE in 7cm
000..009
004
A2 Soft running speed (CLOSE) mm/s
000= 50...009= 140
005
A3 Backjump, OFF= 000 ON= 001 001
A4 Change in direction, OFF= 000 ON= 001
Setting (with +/-) only possible if EMERGENCY
STOP plug (1, green) is unplugged.
000
A5 Added load OPEN
1)
000..009 003
A6 Added load CLOSE
1)
000..009 003
A7 Door type: Overhead sectional door/one-piece
door = 000
Side sectional door* = 001
Side sectional door with soft start = 002
* Obstruction release also in OPEN direction
000
A8 Warning time (OPEN/CLOSE) 001=2sec...
008=16sec
000
A9 Accessory card
000= ZKMagicS
001= ZKMagic
000
b0 Relay 1 (with ZKMagic accessory card)
000= no function
001= E-lock
002= warning light *
002= photo cell test* (interruption transmitter
voltage)
004= status display*: Door in end position OPEN
005= status display*: Door in end position
CLOSED
006= green light*
007= red light*
* if A9= 001
000
b1 Relay 2 (with ZKMagic accessory card)
000= no function
001= E-lock*
002= warning light *
002= photo cell test* (interruption transmitter
voltage)
004= status display*: Door in end position OPEN
005= status display*: Door in end position
CLOSED
006= green light*
007= red light*
* if A9= 001
000
b2 Closing edge protection, for accessory card
ZKMagic and if A9= 001
000= OFF 001= OSE 002= 8k2
000
b3 Empty run detection 000= OFF 001= ON 001
b4 Automatic closing
1)
*, secs. and min.
000= OFF
001.0.010 keep-open time secs.*
(001 = 5secs... 010 = 50secs)
011..040 keep-open time min*
(011=1min... 040=30min) * plus warning time
* only active if door was fully opened
000
b6 Maintenance interval
000= OFF
001..009 (1,000 door movements)
Example: 005 = 5,000 door movements
The operator lighting flashes after every door
movement when the maintenance interval has run
out. A misadjustment resets the counter of the
maintenance interval.
000
13

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Cardo-Door-Magic-1000

Zoeken resetten

  • Mijn handzender was kapot, nieuwe gekocht een Normstahl Ea 433 2 Km, hou kan ik die instellen, ik begrijp het niet, kun je mij helpen?

    Dank
    jeanine.sabbe@skynet.be Gesteld op 22-6-2022 om 11:14

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Cardo Door Magic 1000 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Cardo Door Magic 1000 in de taal/talen: Alle talen als bijlage per email.

De handleiding is 6,6 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info