816489
12
Verklein
Vergroot
Pagina terug
1/33
Pagina verder
RVZ-500 Operation manual
page 12 03/2021
4.2.2. Fastening of the Cutting Disc
1. Turn off the engine and open the disc cover.
2. Use the enclosed wrenches to hold the
spindle and unscrew the fastening nut.
NOTE: Left thread!
3. Fit the cutting disc on the spindle and secure
it. Pay attention to the right sense of
direction – see arrow on disc.
4. Close the disc cover and secure it.
Fig. Location of wrenches
4.2.3. Cutting
1. Have the disc raised above floor.
2. Disengage the emergency button (counter
clockwise)
3. On/off switch on motor in on-position
4. Start the motor with the recoil and set to full
throttle.
5. Open the water tap to engage sprinkling.
6. Move the machine to the beginning of the
cut.
7. Lower slowly the disc into the cut, till
required cutting depth is reached.
8. Sensitively push the machine forward and
follow the marked path (use the guide).
9. The machine can only cut in straight
direction. In case the direction must be
changed, raise the disc from the cut, take
new direction and lower the disc again.
7. At the end of the cut, raise the disc, set the
throttle to idle.
NOTE! Check the water level in the tank and
timely add water if necessary.
For optimal service life of the cutting disc, the
operator should work carefully and sensitively.
Do not force the machine!
Nevertheless, lifetime of the disc may vary
depending on the material to be cut and other
factors.
4.2.4. Cutting Depth Scale
Cutter RVZ-500 has a cutting depth scale. Use
the scale as follows:
1. Lower the disc just to touch the ground. In
this position, adjust the "zero" using the
wing nuts below the scale.
2. Alternatively you can just remember the value
on the scale and then add or subtract required
cutting depth as necessary.
4.3. Engine Turning-Off
1. Shift the throttle control lever to idle
position.
2. Let the engine run idle for a while to cool
down.
3. Push emergency stop button
4. Turn the on/off switch to "OFF" position.
5. Close the fuel tap
4.4. Handling, Transport, Storing
12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Carat VZ-500 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Carat VZ-500 in de taal/talen: Engels als bijlage per email.

De handleiding is 1.94 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info