816480
17
Verklein
Vergroot
Pagina terug
1/44
Pagina verder
17
ENGLISH
Remove the remaining n of the material with the wedge
[15].
Curved cuts are not possible, the diamond grinding wheels
will jam in the material.
When breaking through walls, e.g. with a rotary hammer,
most of the chipping-o󰀨 of the surface material can be avoi-
ded by rst grinding a slot with maximum grinding depth.
For grinding especially hard material, e.g. concrete with
high pebble content, the diamond grinding wheels can
overheat and get damaged. This is clearly indicated by cir-
cular sparking, rotating with the diamond grinding wheels.
When this occurs interrupt the grinding process and allow
the diamond grinding wheels to cool down. Run the power
tool for a short time at no-load speed.
Working advice
Be careful grinding slots in structural walls. See section
“Information on Structures”.
Do not strain the power tool so heavily that it comes to
a standstill.
Firmly support the work piece, secured against sliding,
e.g. with clamping devices.
The power tool may only be used for grinding without
the use of water.
Noticeable decreasing work progress and circular spar-
king indicates the diamond grinding wheels are become
dull. Briey grinding a abrasive material (e.g. limestone
brick) can sharpen the wheels again.(zoals kalkzand-
steen).
Information on Structures
Slots in structural walls are subject to the standard DIN
1053 part 1 or national-specic regulations. These regu-
lations must be observed. Consult the responsible struc-
tural engineer, architect or construction supervisor before
starting.
The permitted slot depth and width depends on the slot
length, wall thickness and the used construction materials.
EMISSION
Vibration emission value ah = 6 m/s².
Uncertainty K < 1.5 m/s².
Typically the A-weighted noise levels of the pro-
duct are: Sound pressure level 93 dB(A); Sound
power level 104 dB(A). Uncertainty K=3 dB.
Measured values determined according to EN 62841.
ENVIRONMENTAL PROTECTION
According to the European regulation 2012/19/
EU, CARAT is responsible to recycle old electric
drill motors. You are therefore requested to re-
turn old CARAT electric drill motors to your local
reseller.
SERVICE AND MAINTENANCE
Pull the mains plug of the power tool from the
socket, before any work on the machine itself.
For safe and proper working, always keep the
machine and ventilation slots clean.
Dismount and clean the diamond grinding wheels and spa-
cers after nishing. Clean the guard and extraction hood.
WARRANTY
For the machine, a guarantee period of 12 months applies
from the moment of delivery. Guarantee claims must be
shown by submission of purchase invoice. The guarantee
includes the repair of defects which have occurred and can
be linked by to material or manufacturing faults.
Not covered by guarantee:
Defects or damages which have arisen
due to incorrect use or connection.
Machine overload.
When maintenance has been carried
out incorrectly or badly.
Information in the manual has not been
properly followed.
The machine is used by unqualied persons.
If the machine is used for purposes
for which it is unsuitable.
The machine is repaired using unoriginal parts.
If the machine encryption is damaged or deleted.
If defects are caused by re, damp and/or transport.
DECLARATION OF CONFORMITY
We declare under our sole responsibility that this product is
in conformity with the following standards or standardized
documents:
EN 62841-1; EN 61000; 2006/42/EC; 2014/30/EC;
2011/65/EU
Director: C.J. van Beek
16-09-2022
CARAT Nederland B.V.
Nikkelstraat 18, 4823 AB Breda, the Netherlands
17

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Carat SL-1253N DUSTEC bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Carat SL-1253N DUSTEC in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans, Pools, Deens, Zweeds als bijlage per email.

De handleiding is 7.63 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info