816449
2
Verklein
Vergroot
Pagina terug
1/10
Pagina verder
2
Contents
Safety instructions
Machine specification & electrical requirements
Assembly & operating instructions
Maintenance & warranty
Safety instructions
To use this tool correctly, you must observe the safety
regulations, the assembly instructions and the operation
instructions contained in this manual.
All persons who use and service the machine must be
acquainted with this Manual and must be informed about any
potential hazards.
Children and infirm people must not use this tool. Children
must be supervised at all times if they are in the area in which
the tool is being used.
It is also imperative that you observe the accident prevention
regulations in force in your area. The same applies for general
rules of occupational health and safety.
Take suitable precautions to protect your eyes, ears, lungs
and hands when operating the Wet Saw.
Keep children and others away from the machine whilst in
use.
Only use circular blades with a continuous rim – DO NOT
USE segmented circular blades, saw blades or abrasive
disks.
The machine should be used indoors only, in a clean, dry,
well lit area and on a clutter free, flat work surface.
Avoid wearing loose clothing, ties, rings, bracelets or other
loose items which may become caught in the moving parts.
Long hair should also be tied back or contained.
Always ensure that all loose tools and components are
removed from the immediate working area.
Switch machine off between cuts and disconnect from
mains supply before carrying out any maintenance,
cleaning or changing the blade.
Do not leave the saw running unattended or touch the
blade whilst in motion – always use the blade guard when
cutting.
Replace damaged blades immediately and ensure that
new blades are fitted correctly to run in the direction
indicated on the blade.
Only recommended replacement parts should be used with
this machine – use of improper accessories could cause
serious injury.
Automatic Overload Protection
To prevent overheating this machine has automatic overload
protection which is designed to cut power to the motor.
Should the automatic overload protection trip, ensure that
mains power supply and machine switch are turned off.
After ten seconds press the breaker button next to the main
switch and restart the machine.
Machine Specification
Power Supply 240V 50Hz
Motor 750W
RPM (No load) 2800 RPM
Maximum Sound Level* 95 dB (A)
Maximum Depth of Cut (with new
blade) 25mm
Maximum Depth of Cut at 45° (with
new blade) 17mm
Mitre Cutting Angle 15°/30°/45° degrees
Cutting Angles 0°-45° degrees
Machine & Accessories packaged
weight 15 kg
*Note: If the sound intensity level exceeds 85 db (A) ear protection should
be worn by the operator
Ensure that the mains voltage corresponds to the instruction
plate – a single phase socket with two contacts and an earth is
obligatory.
Use of an approved PRCD circuit breaker between the
machine and the electrical power point is highly
recommended.
To reduce the risk of unintentional starting, make sure
that the switch is in the OFF position before plugging in.
Repair or replace damaged or worn cable immediately
after first disconnecting from mains supply.
Electrical faults must only be carried out by a qualified
electrician.
The contents of the box should include the following (See
picture below):
oMicrocoup 180 alu
o180mm Diamond Blade
oBlade guard set comprising of bolt, wing nut, guard
support and blade guard
oRip Guide
oVariable angle Mitre Guide
oWrench
oOwner’s Safety & Operating Manual
IMPORTANT
Your new Carat Microcoup 180 Alu has a Super Quiet
Induction Motor for ultra smooth cuts. For best results
allow the blade to do the work, rather than forcing the tile
through the machine. Should the blade stop, simply ease
the tile away and then continue cutting using slightly less
pressure.
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Carat Microcoup 180 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Carat Microcoup 180 in de taal/talen: Nederlands, Engels als bijlage per email.

De handleiding is 2.47 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info