816453
10
Verklein
Vergroot
Pagina terug
1/47
Pagina verder
19
ENGLISH
18
an d'arrêter la machine.
7. ENTRETIEN ET NETTOYAGE
Avant de réaliser toute opération d'entretien, vériez que
la machine est débranchée de l'alimentation électrique.
An de garantir la qualité de la machine sur le long terme,
les opérations d'entretien suivantes doivent être alisées
après chaque utilisation de la machine :
- Inspectez visuellement l'ensemble de la machine.
- Nettoyez la bride et la xation de la lame.
- Nettoyez le moteur (boîtier + ventilateur), le réservoir
d'eau, la pompe à eau, le ltre de la pompe à eau, les
tuyaux et les buses, les rails de guidage et les roulettes de
la table.
- Assurez-vous que tous les boulons et les vis sont bien
serrés.
- Avant d'utiliser la machine, vériez que toutes les
vérications mentionnées ci-dessus ont été eectuées.
een korte rustpauze.
8. ÉLIMINATION
Si aucun accord de retour ou d'élimination n'a été conclu,
veuillez envoyer en recyclage les composants démontés
suivants :
- Pièces de ferraille.
- Pièces en plastique.
- Jetez les autres composants triés en fonction des
caractéristiques des matériaux.
Information à l'intention des pays membres de
l'UE. Les déchets électriques sont recyclables et
ne doivent pas être jetés avec les ordures ménagères !!
Conformément à la directive européenne 2012/19/UE
relative aux déchets électriques et électroniques et à leur
adoption par les diérentes lois nationales, les outils
électriques usés doivent être collectés séparément et
recyclés dans le respect de l'environnement.sadf
1. GENERAL
1.1 Operating manual
This operating manual provides guidance on safe and
eicient operation and should form a basis of any actions
involving the machine. It is an integral part of the machine,
which should be kept in the immediate vicinity accessible
for its operating personnel. Prerequisite of safe operation
is adherence to all safety and handling instructions.
Therefore, before starting any work, the personnel must
read carefully and understand the operating manual.
Moreover, the accident prevention regulations applicable
at the site of the machine operation and general safety
regulations must be complied with.
1.2 Explanation of symbols
Warnings and safety instructions
Warnings and safety instructions in the manual are
identied with the pictograms and provided in blocks
highlighted in grey.
DANGER
... draws attention to an immediate danger that, if
not avoided, may result in heavy or even fatal injuries.
ATTENTION!
... draws attention to potentially dangerous situa-
tions that, if not avoided, may result in material damage.
… marks danger due to electric current.
Failure to observe the safety instructions leads to
danger of heavy or fatal injuries.
… marks danger of crushing.
Failure to observe the safety instructions leads to
danger of heavy injuries from moving parts.
marks danger due to hot surface.
Failure to observe the safety instructions leads to
danger of burns and heavy skin injuries caused by heat.
… marks danger from moving diamond blades.
Failure to observe the safety instructions leads to
danger of cuts and heavy skin injuries caused by rotating
diamond blades.
1.3 Liability limitation
All data and instructions provided in this manual were
compiled with consideration of applicable standards
and regulations, state of the art in this eld and our
long-standing insights and experience.
The manufacturer accepts no liability for damages
caused by:
- Non-observance of the Operating manual.
- Unintended use.
- Employment of unskilled and uninstructed personnel.
- Unauthorized conversions.
- Technical changes.
- Use of non-approved spare parts.
The responsibilities agreed in the delivery contract, the
General Terms and Conditions as well as the delivery
conditions of the manufacturer and the statutory
regulations valid at the time of the conclusion of the
contract shall apply.
Warranty
The manufacturer guarantees the functional capability
of the applied process technology and performance
parameters identied. The warranty period commences
with the defect-free delivery.
Warranty conditions
12 months aer delivery of mechanical and electrical
components for one-shi operation, except for the wear
parts and tools.
The warranty claim expires, if the system was not installed
and started up by our experts.
The warranty extends to the replacement parts. Conse-
quential damages are excluded.
Damage caused by natural wear, decient of improper
maintenance, failure to comply with the operating regula-
tions, excessive loads and use of inappropriate equipment
shall be excluded from the warranty.
2. SAFETY
2.1 Intended use
The CARACOUP 100 ALU and CARACOUP 120 ALU tile
cutting machine is designed exclusively for the following
purposes in the commercial sector: is designed for wet
cutting of the solid construction materials such as: Tile,
ceramic and marble.
- Any claims for damages resulting from unintended use
are excluded.
- The operator alone is responsible for all damages due to
unintended use.
2.2 Rationally foreseeable misuse
Any use of the machine going beyond the intended one,
shall be deemed unintended and thus prohibited.
This also applies to:
- Cutting any materials other than presented.
- Cutting without or with open diamond blade guard.
- Cutting without water.
- Removal of clippings in pendulum cutting procedure
(vertical plunging into chippings from above).
2.3 Responsibilities of the operator
Operator
An operator is every natural or legal person, who uses the
machine or delegates its use to others and is responsible
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Carat CARACOUP 100 ALU bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Carat CARACOUP 100 ALU in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans, Pools, Deens, Zweeds als bijlage per email.

De handleiding is 4.04 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info