212687
1
Verklein
Vergroot
Pagina terug
1/20
Pagina verder
1
Setup and Scanning
Try the Additional Features
Check the Package Contents
Install the Software
Windows
Macintosh
Unlock the Scanning Unit
Connect the Scanner
Try Scanning
p.2
p.3
p.4
p.5
p.6
p.7
Using the Scanner Buttons
p.10
Scanning Film
p.11
Be sure to install the software programs before connecting the scanner
to the computer!
Quick Start Guide
Quick Start Guide
1
CanoScan and ScanGear are trademarks of Canon Inc.
Adobe
®
, Acrobat
®
and Photoshop
®
are trademarks of Adobe Systems Incorporated.
Microsoft and Windows are registered trademarks of Microsoft Corporation in the U.S. and other countries.
Macintosh, Power Macintosh and Mac OS are trademarks of Apple Computer, Inc., registered in the U.S. and other
countries.
ScanSoft and OmniPage are trademarks of ScanSoft, Inc.
Other names and products not mentioned above may be trademarks or registered trademarks of their respective
companies.
In this guide, Windows XP screen shots are used to illustrate explanations common to all operating systems.
Color Image Scanner Models F917000: (CanoScan LiDE 80)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
Note: This equipment has been tested and found to comply with the limits for class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Use of shielded cable with the ferrite core provided with the scanner is required to comply with Class B limits Subpart B of Part 15
of the FCC rules.
Do not make any changes or modifications to the equipment unless otherwise specified in the manual. If such changes or
modifications should be made, you could be required to stop operation of the equipment.
Canon U.S.A. Inc.
One Canon Plaza, Lake Success, NY 11042, U.S.A
Tel No.(516)-328-5600
The socket-outlet shall be installed near the equipment and shall be easily accessible.
Use of a shielded cable with the ferrite core(s) provided with the scanner is necessary to comply with the technical
requirements of the EMC Directive.
Warning
When you use this product, you should pay attention to the following legal issues:
Scanning of certain documents, such as bank notes (bank bills), government bonds and public certificates, may be
prohibited by law and may result in criminal and/or civil liability.
You may be required under law to obtain authorization from a person possessing copyrights or other legal rights
to the item being scanned.
If you are uncertain of the legality of scanning any particular item, you should consult your legal adviser in advance.
Guide to the Manuals
1
Guide to the Manuals
Open the Package
Quick Start Guide (this guide)
This guide describes a series of processes, from opening the package to using the
scanner.
READ THIS GUIDE FIRST!
Scanning Guide (HTML format manual)
Refer to this guide when you have finished setting up the scanner according to the procedures
in the Quick Start Guide. It describes how to utilize the scanner with the bundled software,
and how to solve problems when they occur. You can install this manual onto the hard disk
together with the software programs. When you install it, the Scanning Guide icon will appear
on the desktop. Double-click the icon to view it with a browser program, such as Internet
Explorer.
User’s Guides for Application Programs (PDF format manuals)
ArcSoft PhotoStudio
ArcSoft PhotoBase
OmniPage SE
Presto! PageManager (Windows only)
Select the “View the Electronic Manuals” menu on the CanoScan Setup Utility CD-ROM.
To read these manuals, Adobe Acrobat Reader should be installed on your computer.
HTML
PDF
Check the Package Contents
2
Check the Package Contents
Scanner and Accessories
Documents and Software Programs
Quick Start Guide (this guide)
Additional Documents
CanoScan Setup Utility CD-ROM
Adobe Photoshop Elements CD-ROM
The two figures in the brackets below indicate the respective sizes of the Windows/
Macintosh versions of the software.
Approximately 514 MB (for Windows) / 303 MB (for Macintosh) of hard disk space on
your computer is required to install all the programs. Additional free hard disk space
is required to operate the programs.
ScanGear CS (25 MB / 5 MB) - Scanner Driver
It allows you to scan and load images from the scanner.
CanoScan Toolbox (5 MB / 3 MB) - Scanning Utility Program
It enables you to scan images and copy (print), attach images to e-mail messages or save images with
simple steps. It also works with the scanner buttons.
ArcSoft PhotoStudio (30 MB / 19 MB) - Image Editing Program
It allows you to load images from the scanner, edit and retouch them, and apply special effects and
enhancements.
ArcSoft PhotoBase (75 MB / 5 MB) - Photo Album Program
It allows you to create and edit image albums, perform image searches and create slide shows.
ScanSoft OmniPage (65 MB / 80 MB) - OCR (Optical Character Recognition) Program
It converts characters scanned from a book, magazine or newspaper into text data for editing or
digital transmission.
Presto! PageManager (Windows only) (150 MB) - Digital Document Management Program
It makes it easy to scan, share and organize documents and photos. It automatically links to other
popular programs and avoids file-sharing problems by creating self-executable files.
Adobe Acrobat Reader (24 MB / 24 MB) - PDF File Reader Program
Electronic manuals for the above software programs (HTML (5 MB) and PDF manuals)
Adobe Photoshop Elements (135 MB / 162 MB) - Image Editing Program
It loads images from the scanner and allows you to edit and retouch them or apply special effects
and enhancements. Please read the instruction sheet or electronic (PDF) manual for Adobe
Photoshop Elements.
CanoScan LiDE 80
USB Interface Cable
Stand
Film Guide
Film Adapter Unit
Install the Software (Windows)
3
Install the Software (Windows)
1 Turn the computer on.
2 Place the CanoScan Setup Utility CD-ROM in the drive.
The CanoScan Setup Utility main menu will display.
3 Click [Install the Software].
Read the SOFTWARE USER LICENSE AGREEMENT. Click [Yes] if
you accept the terms.
The [Install] window will display.
4 Click [Start Installation].
You will install seven software programs and the Scanning Guide
(HTML format manual).
5 The installation procedure will start.
Follow the on-screen message prompts and click [Yes] or [Next]
to continue the installation.
6 When the installation is complete, click [Yes].
The computer will restart.
7 After Windows restarts, remove the CD-ROM from
the drive and store it in a safe place.
Continue on p. 5.
With Windows XP/2000, you should log on with
an administrator user name when you install or
uninstall software programs.
If the "Found New Hardware Wizard" or
"Add New Hardware Wizard" appears, click [Cancel].
In few cases, your operating system may
require a restart. Follow the on-screen
messages to restart and resume installation.
Install the Software (Macintosh)
4
Install the Software (Macintosh)
1 Turn the computer on.
2
Place the CanoScan Setup Utility CD-ROM in the drive.
The CanoScan Setup Utility main menu will display.
3 Click [Install the Software].
Read the SOFTWARE USER LICENSE AGREEMENT. Click [Yes] if
you accept the terms.
The [Install] window will display.
4 Click [Start Installation].
You will install six software programs and the Scanning Guide
(HTML format manual).
5 The installation procedure will start.
Follow the on-screen message prompts and click [Yes], [Next]
or [Install] to continue the installation.
6 When the installation is complete, click [Yes].
The computer will restart.
7 After restarting, remove the CD-ROM from the drive
and store it in a safe place.
If the “...Would you like to look for the software
on the Internet?” appears, click [Cancel].
If no window displays, double-click the CD-ROM
icon, then the Setup icon.
Unlock the Scanning Unit
5
Unlock the Scanning Unit
1 Peel the caution seal from the scanner.
2 Gently turn the scanner over.
3 Push the lock switch toward the
unlock mark ( ).
4 Return the scanner to a horizontal position.
Unlock the scanning unit before connecting the scanner to the computer. If it is left
locked, a malfunction or other problem may occur.
When carrying or transporting the scanner in a vehicle, always lock the scanning unit by
pushing the lock switch toward the lock mark ( ). Otherwise the scanning unit may be
damaged.
Unlock Mark
Lock Switch
Connect the Scanner
6
Connect the Scanner
1 Peel the caution seals from the scanner.
2 Connect the scanner to the computer with the supplied USB interface cable.
Using the Scanner in the Upright Position
Installing the Stand Removing the Stand
Positioning an item
Make sure that the scanning unit is unlocked. (P.5)
Only use the USB interface cable provided with the scanner. Use of other cables may
lead to a malfunction.
The scanner does not have a power switch. The power is activated as soon as the
computer is turned on.
USB Interface Cable
Wide Flat Connector
Small Square Connector
Press the hook.
Try Scanning
7
2 Select [Start], [Programs] or [All
Programs], [ArcSoft PhotoStudio] and
[PhotoStudio 5].
PhotoStudio will start.
Windows
Try Scanning
The following steps explain how to scan with ArcSoft PhotoStudio.
1 Place a photo or a picture on the document
glass of the scanner by aligning its top edge
with the alignment mark, and close the
document cover.
Alignment
Mark
Top
Bottom
2 Double-click the [Applications (Mac OS
9)] and [PhotoStudio] folder and the
[PhotoStudio] icon.
PhotoStudio will start.
Macintosh
Try Scanning
8
3 Click the Acquire icon or click the
[File] menu and select [Acquire].
ScanGear CS will start.
If an error message appears, click the [File]
menu, choose [Select Source], select your
scanner model name and click the [Select]
button.
Windows
3 Click the Acquire icon or click the
[File] menu and select [Import...].
When the [Select Source] dialog displays, select
[ScanGear CS 7.2] and click the [OK] button.
ScanGear CS will start.
Macintosh
4 In the [Select source] category, select [Platen].
5 Select [Type of original].
You can select "Photo", "Magazine", "Newspaper" or
"Document".
•Photo: Color, 300 dpi
•Magazine: Color, 150 dpi
•Newspaper: Black and White, 300 dpi
•Document: Grayscale, 300 dpi
6 Click [Preview].
After calibration, the preview scan will start and gradually
display the image.
The image is automatically cropped at its original size.
If you want to trim the image further, drag the mouse
diagonally to select the area.
Try Scanning
9
7 Click [Scan].
The final scan will start.
8 Click or (close box) in the ScanGear CS
window to close it.
The scanned image will appear in the PhotoStudio window.
9 Save the scanned image.
Click the [File] menu and select [Save As]. Select the folder
where you wish to store the image file, enter a file name,
select a file type (JPG format is recommended) and click [Save].
10
Click or (close box) in the PhotoStudio
window to close it.
If the scanner does not perform as described above, read the "Troubleshooting" section
of the Scanning Guide (HTML format manual).
For details about the bundled software programs, read the Scanning Guide or the User’s
Guide (PDF format manual) for each software program on the CanoScan Setup Utility
CD-ROM.
Using the Scanner Buttons
10
Using the Scanner Buttons
You can use the four convenient buttons on the scanner’s front panel to scan and perform related tasks
easily with a single touch of the button. Place an item on the document glass of the scanner before pressing
a button.
To use these buttons, ScanGear CS, CanoScan Toolbox, ArcSoft PhotoBase and Presto!
PageManager (for Windows)/Acrobat Reader (for Macintosh) should be installed from
the CanoScan Setup Utility CD-ROM.
COPY Button
To print (copy) the scanned image with a printer:
1 Press the [COPY] button.
2 The scanner will scan the item.
3 The scanned image will print.
The printer driver should be installed and the
printer should be on-line to use this function.
SCAN Button
To open the scanned image in the PhotoBase
window:
1 Press the [SCAN] button.
2 The scanner will scan the item.
3 The scanned image will appear in the
PhotoBase window.
FILE Button
To save the scanned image as a PDF file:
1 Press the [FILE] button.
2 The scanner will scan the item.
3 The scanned image will be saved as a
PDF document and appear in Presto!
PageManager (for Windows) or Adobe
Acrobat Reader (for Macintosh).
If you press the [Cancel] button while scanning, you can change the default settings for
scanning. For changing settings or arranging the scanner button assignments, refer to
the “CanoScan Toolbox” section of the Scanning Guide (HTML format manual).
E-MAIL Button
To e-mail the scanned image as an attached file:
1 Press the [E-MAIL] button.
2 The scanner will scan the item.
3 The [E-mail software selection] dialog
will appear. Select an option from the
list and click [OK].
This step is required only for the first scan.
4 The e-mail software will start and the
scanned image will be attached in a
new message window.
5 Enter the receiver’s address and title,
write a message, confirm the required
settings, and send the message.
The e-mail software, such as Outlook Express,
Microsoft Outlook, Eudora or Netscape
Messenger, should be installed and enabled. With
certain e-mail programs, you should enable the
MAPI function (for Windows).
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Canon lide80 scanner bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Canon lide80 scanner in de taal/talen: Engels als bijlage per email.

De handleiding is 2,06 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info