212684
1
Verklein
Vergroot
Pagina terug
1/14
Pagina verder
1
English
Quick Start Guide
Quick Start Guide
Setup and Scanning
Try the Additional Features
Check the Package Contents
Install the Software
Windows
Macintosh
Unlock the Scanning Unit
Connect the Scanner
Try Scanning
p.
3
p.
4
p.
5
p.
6
p.
7
p.
8
Using the Scanner Buttons
p.
1
1
Using the USB 2.0 Interface
expansion cards (Windows Only)
p.
1
2
Be sure to install the software programs before connecting the scanner
to the computer!
Please read this guide before operating this scanner. After you finish reading this guide, store it in
a safe place for future reference.
Guide to the Manuals
2
Guide to the Manuals
CanoScan and ScanGear are trademarks of Canon Inc.
Adobe
®
and Acrobat
®
are trademarks of Adobe Systems Incorporated.
Microsoft and Windows are registered trademarks of Microsoft Corporation in the U.S. and other countries.
Macintosh, Power Macintosh and Mac OS are trademarks of Apple Computer, Inc., registered in the U.S. and other countries.
ScanSoft and OmniPage are trademarks of ScanSoft, Inc.
Other names and products not mentioned above may be trademarks or registered trademarks of their respective companies.
In this guide, Windows XP screen shots are used to illustrate explanations common to all operating systems.
Open the Package
Quick Start Guide (this guide)
This guide describes a series of processes, from opening the package to using the
scanner.
READ THIS GUIDE FIRST!
Scanning Guide (HTML format manual)
Refer to this guide when you have finished setting up the scanner according to the procedures
in the
Quick Start Guide
. It describes how to utilize the scanner with the bundled software,
and how to solve problems when they occur. You can install this manual onto the hard disk
together with the software programs. When you install it, the
Scanning Guide
icon will appear
on the desktop. Double-click the icon to view it with a browser program, such as Internet
Explorer.
User’s Guides for Application Programs (PDF format manuals)
ArcSoft PhotoStudio
ScanSoft OmniPage SE
Select the “View the Electronic Manuals” menu on the CanoScan Setup Utility CD-ROM. To
read these manuals, Adobe Acrobat Reader should be installed on your computer.
The socket-outlet shall be installed near the equipment and shall be easily accessible.
Use of a shielded cable with the ferrite core(s) provided with the scanner is necessary to comply with the technical
requirements of the EMC Directive.
Warning
When you use this product, you should pay attention to the following legal issues:
Scanning of certain documents, such as bank notes (bank bills), government bonds and public certificates, may be
prohibited by law and may result in criminal and/or civil liability.
You may be required under law to obtain authorization from a person possessing copyrights or other legal rights to
the item being scanned.
If you are uncertain of the legality of scanning any particular item, you should consult your legal adviser in advance.
HTML
PDF
Check the Package Contents
3
English
Check the Package Contents
Scanner and Accessories
Documents and Software Programs
Quick Start Guide (this guide)
Additional Documents
CanoScan Setup Utility CD-ROM
The two figures in the brackets below indicate the respective sizes of the Windows/
Macintosh versions of the software.
Approximately 200 MB/ 160 MB (for Windows/Macintosh) of hard disk space on your
computer is required to install all the programs. Additional free hard disk space is
required to operate the programs.
ScanGear CS (25 MB / 10 MB) - Scanner Driver
It allows you to scan and load images from the scanner.
CanoScan Toolbox (15 MB / 10 MB) - Scanning Utility Program
It enables you to scan images and copy (print), attach images to e-mail messages or save images with
simple steps. It also works with the scanner buttons.
ArcSoft PhotoStudio (35 MB / 20 MB) - Image Editing Program
It allows you to load images from the scanner, edit and retouch them, and apply special effects and
enhancements.
ScanSoft OmniPage SE (90 MB / 80 MB) - OCR (Optical Character Recognition) Program
It converts characters scanned from a book, magazine or newspaper into text data for editing or
digital transmission.
Adobe Acrobat Reader (25 MB / 30 MB) - PDF File Reader Program
Electronic manuals for the above software programs (HTML (10 MB) and PDF manuals)
CanoScan LiDE 35
USB Interface Cable
Stand (P. 7)
Install the Software (Windows)
4
Install the Software (Windows)
1
Turn the computer on.
2
Place the CanoScan Setup Utility CD-ROM in the drive.
After you select your language, the CanoScan Setup Utility main
menu will display.
3
Click [Install the Software].
Read the SOFTWARE USER LICENSE AGREEMENT. Click [Yes] if
you accept the terms.
The [Install] window will display.
4
Click [Start Installation].
You will install five software programs and the
Scanning Guide
(HTML format manual).
5
The installation procedure will start.
Follow the on-screen message prompts and click [Next] or [Yes]
to continue the installation.
6
When the installation is complete, click [Yes].
The computer will restart.
7
After Windows restarts, remove the CD-ROM from
the drive and store it in a safe place.
Continue on P. 6.
With Windows XP/2000, you should log on with
an administrator user name when you install or
uninstall software programs.
If you are using a computer which does not
equip USB 2.0 interface by standard, refer to
P. 12 .
If the "Found New Hardware Wizard" or
"Add New Hardware Wizard" appears, click [Cancel].
In few cases, your operating system may
require a restart. Follow the on-screen
messages to restart and resume installation.
Windows
Install the Software (Macintosh)
5
English
Install the Software (Macintosh)
1
Turn the computer on.
Make sure to log in with the first created administrator to install the software. You cannot install the
software when logged in using added administrator accounts.
2
Place the CanoScan Setup Utility CD-ROM in the
drive.
3
Double-click the CD-ROM icon.
4
Double-click the [SetUp] icon.
After you select your language, the CanoScan Setup Utility
main menu will display.
5
Click [Install the Software].
Read the SOFTWARE USER LICENSE AGREEMENT. Click [Yes] if
you accept the terms.
The [Install] window will display.
6
Click [Start Installation].
You will install five software programs and the
Scanning Guide
(HTML format manual)
7
The installation procedure will start.
Follow the on-screen message prompts and click [Next], [Yes]
or [Install] to continue the installation.
If a verification dialog appears, input the Administrator’s name
and password.
8
When the installation is complete, click [Yes].
The computer will restart.
9
After restarting, remove the CD-ROM from the drive
and store it in a safe place.
Macintosh
Unlock the Scanning Unit
6
Unlock the Scanning Unit
1
Peel the seals off the scanner.
2
Gently turn the scanner over.
3
Push the lock switch toward the unlock mark ( ).
4
Return the scanner to a horizontal position.
Unlock the scanning unit before connecting the scanner to the computer. If it is left
locked, a malfunction or other problem may occur.
Do not tilt the scanner more than 90 degrees from horizontal when releasing the lock.
When locking the scanner, do not lift up the back and tilt the front (scanner button
location) downward. You may be unable to set the lock.
• When carrying or transporting the scanner, always lock the scanning unit by pushing the
lock switch toward the lock mark ( ).
Lock Switch
Unlock Mark
Connect the Scanner
7
English
Connect the Scanner
1
Peel the caution seal from the back of the scanner.
2
Connect the scanner to the computer with the supplied USB interface cable.
Using the Scanner in the Upright Position
Installing the Stand Removing the Stand
Positioning an item
Make sure that the scanning unit is unlocked. (P. 6)
Only use the USB interface cable provided with the scanner. Use of other cables may
lead to a malfunction.
The scanner does not have a power switch. The power is activated as soon as the
computer is turned on.
When the scanner is connected to the USB 1.1 port on Windows XP, do not worry if the
"HI-SPEED USB Device Plugged into non-HI-SPEED USB Hub" message appears. You can
operate the scanner in this condition without problems.
USB Interface Cable
Wide Flat Connector
Small Square Connector
USB Connector
Removing the stand.
Press the hook.
Try Scanning
8
Try Scanning
The following steps explain how to scan with ArcSoft PhotoStudio.
1
Place a photo or a picture on the glass
by aligning its top edge with the
alignment mark, and close the
document cover.
Alignment
Mark
Bottom
Top
2
Select [Start], [Programs] or [All
Programs], [ArcSoft PhotoStudio 5.5]
and [PhotoStudio 5.5].
PhotoStudio will start.
Windows
2
Double-click the [Applications] folder
followed by the [PhotoStudio] folder
and the [PhotoStudio] icon.
PhotoStudio will start.
Macintosh
Try Scanning
9
English
3
Click the [File] menu and choose [Select Source].
Select your scanner model name and click the [Select] button
for Windows or the [OK] button for Macintosh.
4
Click the Acquire icon or click the [File] menu
and select [Acquire].
ScanGear CS will start.
5
Select the [Select Source].
You can select from the following options.
Photo (Color)/Magazine (Color)/Newspaper (B&W)/Document
(Grayscale).
6
Click [Preview].
After calibration, the preview scan will start and gradually
display the image.
The image is automatically cropped at its original size.
If you want to trim the image further, drag the mouse
diagonally to select the area.
7
Select the [Destination].
You can select [Print] or [Image display].
When [Print] is selected, the output resolution is set to 300 dpi.
When [Image display] is selected, it is set to 150 dpi.
[Print] is selected in this example.
After you set this setting the first time, you
do not need to set it from the second time
onward with the same scanner.
You will need to reset this setting if you
select a different scanner or a digital
camera.
Do not open the document cover while a
scan is in progress.
System Information
14
System Information
This form should be used to record the operating environment for the purchased scanner.
If any problems occur with the scanner, you will need this information when you contact our Customer
Support Help Desk. Be sure to record the information and store it in a safe location.
This information is also required to request a repair under warranty. Make sure you record the information
and store it in a safe location.
Guaranteed servicing for this equipment will expire five years after production ceases.
• About the Computer Used
Date of Purchase:
Dealer Tel:
Dealer Address:
Scanner Model: CanoScan LiDE 35
Serial Number (on the back of the equipment):
Manufacturer: Model:
CPU: Clock Speed: MHz
Memory Capacity (RAM): MB
Space Available: MBHard Disk Capacity: MB
OS: Windows XP Me 2000 98
Macintosh OS X v10.1 OS X v10.2 OS X v10.3
Monitor Type: Monitor Size: inches
Printer: Manufacturer:
Type of Printer: Printer Resolutions:
Installed Virus Protection Program:
Installed Compression Program:
On-Board Expansion Cards:
Attached Peripherals:
Connected Network System:
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Canon lide35 scanner bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Canon lide35 scanner in de taal/talen: Engels als bijlage per email.

De handleiding is 2 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info