543013
188
Verklein
Vergroot
Pagina terug
1/206
Pagina verder
Additional Information
188
8
Troubleshooting
Do not disconnect the USB cable or the power source until you safely end the connection from the computer. Cannot
write data with this connection. To write data to the camcorder, connect the compact power adapter then reconnect
the camcorder and computer.
- The camcorder cannot be operated while it is not being powered by the compact power adapter and is connected to a
computer with a USB cable. In addition, clips cannot be written back to the camcorder. To avoid corrupting the data on
the CF card, use the computer’s Safely Remove Hardware function to end the connection and disconnect the USB cable
before using the camcorder.
- To be able to write back clips to the camcorder, use the computer’s Safely Remove Hardware function to end the
connection, disconnect the USB cable, power the camcorder using the compact power adapter and only then connect it
to the computer again.
Do not disconnect the USB cable or the power source until you safely end the connection from the computer. Connect
the compact power adapter
- When the camcorder is in mode and is connected to the computer with a USB cable, the camcorder cannot be
operated. Disconnecting the USB cable or power source while this message appears may result in permanent loss of
the clips on the CF card. Use the computer’s Safely Remove Hardware function to end the connection and disconnect
the USB cable before using the camcorder.
- To be able to write back clips to the camcorder, power the camcorder using the compact power adapter and only then
connect it to the computer using a USB cable.
File name error
- The folder and file numbers have reached their maximum value. Set [Other Functions] [Photo Numbering] to [Reset]
and delete all the photos on the SD card (0 162) or initialize it (0 39).
Invalid operation
- The following operations cannot be performed.
Adding a shot mark to a clip that already has a shot mark or to a clip in frame recording mode or interval recording
mode.
Adding an e mark to clip that already has an e mark or adding a Z mark to a clip that already has a Z mark.
In mode, immediately reviewing a recording made in a special recording mode.
Pressing the START/STOP button when there is no CF card in the camcorder.
Media full
- CF card A and CF card B are full. Delete some clips (0 138) to free some space or replace a CF card.
Media is almost full
- The amount of available space on CF card A and CF card B combined is low. Replace the CF card that is not selected.
No clips
- There are no clips on the CF card to play back. Clips must be recorded (0 43) in order to play them back.
No photos
- There are no photos on the SD card to play back. Photos must be taken (0 159) in order to view them.
No Shot Marks
- This message appears if shot marks in a clip were deleted from the [Shot Mark] index screen. Press the INDEX button to
return to the clip index screen.
Number of Shot Marks at maximum
- The shot mark could not be added because the clip already contains 100 shot marks (c and d marks combined). You
must delete shot marks (0 141) before adding any more.
Recorded in NTSC standard Check data on CF A/CF B Initializing the card is also recommended
- The CF card contains clips that are recorded in the NTSC system. Save your clips (0 150) and initialize the CF card
(0 39).
Recording was stopped.
- When recording a single clip for an extended period of time, the clip will be split into smaller video files every 2 GB. This
message will appear when the number of smaller video files reaches 99.
SD card error
- You inserted a MultiMedia Card (MMC) into the camcorder. Use a recommended SD card (0 37).
COPY
188

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Canon XF 300 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Canon XF 300 in de taal/talen: Engels als bijlage per email.

De handleiding is 12,49 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Canon XF 300

Canon XF 300 Gebruiksaanwijzing - Nederlands - 218 pagina's

Canon XF 300 Gebruiksaanwijzing - Deutsch - 226 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info