536758
73
Verklein
Vergroot
Pagina terug
1/208
Pagina verder
If the Infrared icon is not displayed, the infrared communication driver may not be installed. Refer to
your Windows documentation.
(3) Ensure that iP90 is displayed on the Status tab.
If not displayed, ensure that the printer is turned on. Bring the printer and computer closer to each other
in such a manner that their infrared ports are opposed properly.
If the same problem persists, turn off the printer and then remove the Universal AC Adapter (remove the
battery if loaded). Next, connect the Universal AC Adapter (and the battery if you use it). Next, turn on
the printer and retry printing.
If the name of another unit is displayed, change the orientation of this unit or turn it off.
During infrared communication, infrared rays were interrupted or
another infrared communication unit is operating nearby
If infrared communication between the infrared ports of the printer and computer or PDA is interrupted by
any obstacle for ten and several seconds or longer during printing, the paper on which data is being printed is
ejected and the printer is reset. Remove the obstacle and retry printing.
If an infrared communication unit is operating nearby, interference can occur and fail in printing the
document to the end. While printing a document through infrared communication, do not operate another
infrared communication unit, such as a remote controller of a TV, nearby.
For how to print through infrared communication, refer to the Quick Start Guide.
The requirements for infrared communications with the computer or
other devices are not satisfied
Printing from the computer
Use a computer equipped with the infrared communication port based on the IrDA version 1.1 standard.
Printing from the PDA or mobile phone
Use a PDA or a mobile phone equipped with an IrDA port and which was based on the IrMC version 1.1.
The infrared communication driver is inactive
Check whether the infrared communication driver is active.
In Windows Me
(1) Click Start and select Settings and then Control Panel.
(2) Ensure that the Wireless Link icon is displayed.
If the Wireless Link icon is not displayed, the infrared communication driver may not be installed. Refer
to your Windows documentation.
In Windows 98
(1) Click Start , select Settings , and then Control Panel.
(2) Double-click the Infrared icon.
(3) Click the Options tab.
(4) Select the Enable infrared communication check box (or select the Enable infrared
communication on : check box).
(5) Click the OK button.
The printer port status is wrong (In Windows Me or Windows 98)
73

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Canon Pixma iP90 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Canon Pixma iP90 in de taal/talen: Engels als bijlage per email.

De handleiding is 3,7 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info