543069
1
Verklein
Vergroot
Pagina terug
1/21
Pagina verder
Introduction
Preparing
a Sample
Basic
Windows
Pre-adjustments
Image
Characteristics
Saving
Preferences
Reference
Contents
Picture Style File Creating Software
Picture Style Editor
Ver. 1.14
Instruction Manual
O Content of this Instruction Manual
O PSE stands for Picture Style Editor.
O ` indicates the selection procedure of the menu.
(Example: [Picture Style Editor] menu ` [Quit
Picture Style Editor].)
O Square brackets are used to indicate items such
as menu names, button names and window
names that appear on the computer screen.
O Text inside < > indicates a key on the keyboard.
O p.** indicates a reference page.
Click to move to the relevant page.
O : Marks information that should be read
before use.
O : Marks additional information you may find
helpful.
© CANON INC. 2014 CEL-SV1TA210
O Switching Between Pages
O Click on arrows on the bottom right of the screen.
: next page
: previous page
: return to a page you had previously
displayed
O Click on the headings on the right side of the
screen to switch to the contents page of that
heading. Also, click the item you want to read
about on the table of contents to move to the
relevant page.
ENGLISH
2
Introduction
Preparing
a Sample
Basic
Windows
Pre-adjustments
Image
Characteristics
Saving
Preferences
Reference
Contents
Introduction
Picture Style Editor (hereinafter, “PSE”) is software that allows you to edit
Picture Style to your unique image characteristics and save the edited
results as original Picture Style files.
O What is a Picture Style file?
A Picture Style file (extension “.PF2” or “.PF3”) is an extended
function of a Picture Style. It differs from the seven preset Picture
Styles (Auto, Standard, Portrait, Landscape, Neutral, Faithful and
Monochrome) and provides image characteristics that are effective
in a very limited number of scenes.
You can further expand your photographic expression by using a
Picture Style file effective for a specific scene.
O Main Features of PSE
With PSE, you can use the functions below to edit Picture Style to
your unique image characteristics and save the edited results as
original Picture Style files (extension “.PF2” or “.PF3”).
O Select a Picture Style to be used as a basis for your images
O Set the [Sharpness], [Contrast], [Color saturation] and [Color tone]
O Make adjustments to a specific color
O Adjust the brightness and contrast (gamma characteristic)
In addition, you can register your saved original Picture Style files on
a camera with the Picture Style function and then apply those styles
to shot images. You can also use Digital Photo Professional
(hereinafter, “DPP”) to apply the styles to RAW images.
O Color Management
Use PSE in a computer environment with color management.
Also, set the profile of the monitor you are using and the color space
of the sample image to be used to perform the adjustments, etc. in
the preferences window (p.19).
System Requirements
*
1
Core 2 Duo or higher is recommended.
O This software program is not compatible with UFS (UNIX File System)
formatted disks.
O Check the Canon website for the latest system requirements,
including supported OS versions.
Sample Images for Adjustment
PSE enables you to use RAW images shot with EOS cameras*
(excluding the EOS DCS1 and EOS DCS3) as sample images for
adjustment. You can then save the completed adjustments as original
Picture Style files.
* Compatible with RAW images shot with EOS D6000 or EOS D2000
that have been converted to RAW images using the CR2 Converter
and have the “.CR2” extension.
For information on CR2 Converter, refer to Canon website.
OS Mac OS X 10.7 to 10.9
Computer Macintosh with one of the above OS installed
CPU Intel processor*
1
RAM Minimum 1GB
Display
Resolution: 1024 × 768 or more
Colors: Thousands or more
3
Introduction
Preparing
a Sample
Basic
Windows
Pre-adjustments
Image
Characteristics
Saving
Preferences
Reference
Contents
Contents
Introduction ................................................................ 2
System Requirements................................................ 2
Sample Images for Adjustment .................................. 2
Preparing Sample Images.......................................... 4
Starting up PSE.......................................................... 4
Opening a Sample Image .......................................... 4
Basic Windows........................................................... 5
Main Window ................................................................ 5
Enlarging a Specific Area ......................................... 6
Adjusting While Comparing with the Original Image.. 6
Navigator Window......................................................... 7
Setting the Warning Indicators.................................. 7
Tool Palette................................................................... 8
Pre-adjusting the Images ........................................... 9
Correcting the Brightness ............................................. 9
Correcting the White Balance....................................... 9
Making Basic Adjustments to Image
Characteristics ......................................................... 10
Selecting a Picture Style to Be Used as a Basis ....... 10
Using a Downloaded Picture Style File Effective for the
Scene.....................................................................
10
Setting Sharpness, Contrast, Color Saturation and Color
Tone...........................................................................
11
Adjusting the Gamma Characteristic for RGB ........... 11
Adjusting Color......................................................... 12
Making Minute Adjustments to Color ....................... 13
Specifying the Color Directly...................................... 16
Specifying the Color on the Color Wheel................ 16
Specifying the Color by Entering the Color Value .. 16
Displaying the Adjustment Color List and its Functions .
16
Overlapped Range of Effect of Adjusted
Colors .....................................................................
16
Deleting an Adjusted Color..................................... 16
Color Display Mode .................................................... 17
Adjusting the Gamma Characteristic for Luminosity... 17
Saving the Adjustments as a Picture Style File ....... 18
Using a Picture Style File ........................................ 18
Registering a Picture Style File to the Camera........... 18
Using a Picture Style File with DPP............................ 18
Preferences ............................................................. 19
Quitting PSE ............................................................ 19
Reference ................................................................ 20
Troubleshooting.......................................................... 20
Deleting the Software (Uninstalling) ........................... 20
4
Introduction
Preparing
a Sample
Basic
Windows
Pre-adjustments
Image
Characteristics
Saving
Preferences
Reference
Contents
Preparing Sample Images
PSE uses a sample image to perform the various adjustments and save
the adjusted results as an original Picture Style file. For this reason, a
sample image (p.2) to be used for this purpose needs to be prepared in
advance and saved on your computer.
The settings performed in PSE are saved as a Picture Style file (p.18)
which is separate from the sample image, and the sample image used
to perform the adjustments is not affected at all.
Starting up PSE
Click the [Picture Style Editor] icon in the Dock.
«The main window (Description on the right) appears when PSE
starts up.
You can also start up PSE from the camera software “EOS Utility”.
Refer to the “Function for Use with the Accessories” of “Reference”
in “EOS Utility Instruction Manual” (PDF electronic manual) for
details.
Opening a Sample Image
Open a sample image and perform various adjustments with that image
as a basis.
Noise reduction to the sample images may be applied by PSE included
in EOS Solution Disk Ver.26 or later.
Drag and drop a sample image to the main window.
«The sample image is displayed in the main window with the
camera settings at the time of shooting.
«The [Tool palette] appears.
Drag and drop
O If you open an image as a sample image with PSE, the shot
settings on the camera will appear in the image. However, the
Auto Lighting Optimizer settings will not appear.
O If you adjust a RAW image in DPP and then open it as a sample
image with PSE, the adjustments made in DPP will not appear in
the image.
5
Introduction
Preparing
a Sample
Basic
Windows
Pre-adjustments
Image
Characteristics
Saving
Preferences
Reference
Contents
Basic Windows
You can select the display magnification and the display method, etc. of the sample image.
Main Window
Full view
Normal screen
Before and after
adjustment
comparison display
(Top/bottom split)
(p.6)
Image rotation
(90 degree
increments to the left
or right)
Before and after
adjustment
comparison display
(Left/right split) (p.6)
Display magnification
(5 ratios: 12.5%, 25%,
50%, 100% and 200%)
100% (actual pixel size)
view
Color values of the cursor position (Before adjustment/after adjustment/
difference between before and after adjustment) (8-bit conversion)
Work color space display (p.19)
Cursor coordinates
position
Color display mode (p.17)
6
Introduction
Preparing
a Sample
Basic
Windows
Pre-adjustments
Image
Characteristics
Saving
Preferences
Reference
Contents
Enlarging a Specific Area
You can enlarge a specific area in the main window to 100%.
In the main window, double-click the area you want
to enlarge.
«The area you double-clicked is enlarged to 100% (actual pixel
size). If you wait for a while, it changes to a clearer display.
O To change the display position, drag on the image or drag the
enlargement display position (p.7) in the [Navigator] window.
O Double-click again to revert to the full view.
Double-click
Adjusting While Comparing with the Original Image
You can display before and after versions of an adjusted image in the
same window and perform adjustments while checking the adjustment
results.
Select [ ] or [ ].
«The images are displayed split top and bottom or left and right.
[ ] (Top/bottom split) display [ ] (Left/right split) display
O The image before adjustment
is displayed at the top, and
that after adjustment at the
bottom.
O The image before adjustment
is displayed on the left, and
that after adjustment on the
right.
7
Introduction
Preparing
a Sample
Basic
Windows
Pre-adjustments
Image
Characteristics
Saving
Preferences
Reference
Contents
The display position of an image when it is enlarged in the main window
and the image histogram can be displayed in the navigator window. You
can also set warning indicators to prevent excessive settings being
made.
Display the [Navigator] window.
O Select the [View] menu ` [Navigator].
Navigator Window
Enlargement display position
(p.6)
Move the display position by
dragging
Histogram
Warning range
Warning indicator setting
Switches the histogram display
[Y] in the histogram display indicates luminance.
Setting the Warning Indicators
You can set warning indicators for luminance values (Y) and color
values (RGB) which are useful for preventing excessive settings being
made. Luminance and color value domains which are outside the set
range blink as warning indicators on images in the main window.
1
Checkmark [Show warning on images] and select [Y]
or [RGB].
2
Enter the upper and lower limit values of the warning
range.
«The domain where values are outside the upper and lower limit of
the range blinks on the image in the main window.
O To stop the warning indicators, remove the check mark from the
[Show warning on images] checkbox.
8
Introduction
Preparing
a Sample
Basic
Windows
Pre-adjustments
Image
Characteristics
Saving
Preferences
Reference
Contents
You can adjust the image characteristics of the Picture Style file by using the various functions of the [Tool palette].
The adjustments made with the [Tool palette] are immediately applied to the image in the main window, enabling you to check the results as you work.
We recommend that you make adjustments in the following order.
(1) Adjust with the [Basic] tab sheet (p.10)
(2) Adjust with the [Six Color-Axes] tab sheet (p.12)
(3) Adjust with the [Specific Colors] tab sheet (p.13)
[Basic] Tab Sheet
Make basic adjustments to image
characteristics.
[Six Color-Axes] Tab Sheet
Make color adjustments to image
characteristics.
[Specific Colors] Tab Sheet
Make fine adjustments to a specific
color gamut.
Tool Palette
You can select the [View] menu ` [Tool palette] to switch the [Tool
palette] show/hide.
9
Introduction
Preparing
a Sample
Basic
Windows
Pre-adjustments
Image
Characteristics
Saving
Preferences
Reference
Contents
Pre-adjusting the Images
Sample images used in the adjustment process (p.2) which do not have
proper exposure or white balance can be adjusted using the
[Preliminary adjustment] window to correct their brightness and white
balance.
However, please remember that adjustments made with the [Preliminary
adjustment] window are merely pre-adjustments for performing
adjustments with the [Tool palette] (p.8). For this reason, adjustments
made with the [Preliminary adjustment] window are not saved in the
Picture Style file which you create.
If the sample image used for adjustments has proper exposure and
white balance, it is not necessary to make adjustments with the
[Preliminary adjustment] window.
1
Select the [Tools] menu ` [Preliminary adjustment].
«The [Preliminary adjustment] window appears.
O When the [Preliminary adjustment] window appears, the display
switches to normal display, even if the main window display is
showing a comparison of images before and after adjustment
(p.6).
2
Adjust to correct the brightness of the image.
«The adjustments are applied to the image.
Correcting the Brightness
Drag to the left or right
to adjust
Adjust to correct the white balance.
«The adjustments are applied to the image.
Correcting the White Balance
Select the white balance
The color temperature slider
Select [Color temperature] from the white balance
list box, then drag the slider left or right
Click white balance
Click the [ ] button
and then click on a point
that is to be the standard
for white
10
Introduction
Preparing
a Sample
Basic
Windows
Pre-adjustments
Image
Characteristics
Saving
Preferences
Reference
Contents
Making Basic Adjustments to Image Characteristics
Use the [Basic] tab sheet in the [Tool palette] to make basic adjustments
to image characteristics.
Select the [Basic] tab in the [Tool palette].
«The [Basic] tab sheet appears.
Adjust the Gamma
Characteristic for RGB (p.11)
Adjust Sharpness, Contrast,
Color saturation, and Color
tone (p.11)
Select a Picture Style to be
used as a basis (this page)
Save a Picture Style file
(p.18)
Load a Picture Style file (this page)
Select the Picture Style used as the basis of the adjustments from the
five preset (except Auto or Monochrome) Picture Styles (Standard,
Portrait, Landscape, Neutral and Faithful).
You can also register and use a Picture Style file effective for the scene
that you have downloaded from Canon website.
Using a Downloaded Picture Style File
Effective for the Scene
Select a Picture Style.
«The selected Picture Style is applied to the image.
1
Click the [ ] button.
«The [Open Picture Style file] window appears.
2
Select a Picture Style file to be registered and click
the [Open] button.
«The selected Picture Style file is applied to the image.
Selecting a Picture Style to Be Used as a Basis
O Original Picture Style files created with PSE (p.18) can also be
registered and used by following the procedure above.
O Picture Style files compatible with PSE are files with the “.PF2” or
“.PF3” extensions.
11
Introduction
Preparing
a Sample
Basic
Windows
Pre-adjustments
Image
Characteristics
Saving
Preferences
Reference
Contents
Drag each slider.
«The settings are applied to the image.
Setting Sharpness, Contrast, Color Saturation and Color Tone
You can use the tone curve to adjust brightness and contrast under
RGB.
Use the tone curve in this tab sheet before adjusting with the [Six Color-
Axes] tab sheet or [Specific Colors] tab sheet.
Adjust the brightness and contrast.
«The brightness and contrast of the image change.
O The horizontal axis shows the input level and the vertical axis
shows the output level.
O The maximum number of [ ] is 10.
O To delete a [ ], select the [ ] and then either press the <Del>
key on the keyboard or double-click on the [ ].
Adjusting the Gamma Characteristic for RGB
Click to add a [ ]
(adjustment point) and
adjust by dragging
The value of the
selected point (you can
also enter numerical
values)
Note that if you adjust the tone curve in the [Basic] tab after making
adjustments with the [Six Color-Axes] tab sheet or [Specific Colors]
tab sheet, the color characteristic will be further adjusted and
intended image characteristics may not be achieved. To further
adjust brightness and contrast after adjusting with the [Six Color-
Axes] tab sheet or [Specific Colors] tab sheet, use the tone curve for
adjusting luminosity in the [Specific Colors] tab sheet.
12
Introduction
Preparing
a Sample
Basic
Windows
Pre-adjustments
Image
Characteristics
Saving
Preferences
Reference
Contents
Adjusting Color
You can adjust the color region you selected using hue, saturation, and
luminosity.
1
Select the [Six Color-Axes] tab in the [Tool palette].
«The [Six Color-Axes] tab sheet appears.
Note that if you adjust a color with the [Basic] tab sheet after making
adjustments with the [Six Color-Axes] tab sheet, the color
characteristic will be further adjusted and intended image
characteristics may not be achieved. We recommend that you make
adjustments in the following order.
(1) Adjust using the [Basic] tab sheet, (2) adjust using the [Six
Color-Axes] tab sheet, (3) adjust using the [Specific Colors] tab
sheet.
Save a Picture Style file (p.18)
Load a Picture Style file (p.10)
Hue adjustment sliders (p.13)
Hue region select buttons
(this page)
Adjustment color wheel
(this page)
2
Select the color region you want to adjust.
O Select the color region you want to adjust from the adjustment
color wheel.
You can also select the color region by clicking a hue region
select button.
3
Adjust the upper and lower hue limits for the
selected region.
O You can adjust the upper and lower hue limits for the selected
region by dragging the boundary lines for each hue in the
direction of the circumference.
13
Introduction
Preparing
a Sample
Basic
Windows
Pre-adjustments
Image
Characteristics
Saving
Preferences
Reference
Contents
4
Adjust color.
O Drag the sliders to adjust color. You can also directly enter values
to adjust.
H: Adjust hue.
S: Adjust saturation.
L: Adjust luminosity.
Making Minute Adjustments to Color
You can make minute adjustments to a color you have specified, using
the hue, saturation and luminosity functions in order to get the color you
want. You can also set a range for the effect on surrounding colors
which occurs when you adjust the colors you have specified.
1
Select the [Specific Colors] tab in the [Tool palette].
«The [Specific Colors] tab sheet appears.
Note that if you adjust a color with the [Six Color-Axes] tab sheet or
[Basic] tab sheet after making adjustments with the [Specific Colors]
tab sheet, the color characteristic will be further adjusted and
intended image characteristics may not be achieved. We
recommend that you make adjustments in the following order.
(1) Adjust using the [Basic] tab sheet, (2) adjust using the [Six Color-
Axes] tab sheet, (3) adjust using the [Specific Colors] tab sheet.
Minute adjustments to
a specified color (p.14)
Save a Picture Style file (p.18)
Load a Picture Style file (p.10)
Adjust the gamma characteristic for luminosity (p.17)
Adjustment color list (p.16)
Color display mode (p.17)
14
Introduction
Preparing
a Sample
Basic
Windows
Pre-adjustments
Image
Characteristics
Saving
Preferences
Reference
Contents
2
Specify the color you want to adjust.
O Click the [ ] button and then click the color you want to
adjust on the image.
«The selected color is displayed as an adjustment point [ ] on
the color wheel.
Click
Click
3
Determine the range of effect for the color you want
to adjust.
O The range of effect for hue, saturation, and luminosity can be set
within the limits below.
Color of the adjustment point selected in step 2
Range of upper and lower limit of saturation
Drag to move towards the center or towards
the outer perimeter
Range of upper and lower limit of hue
Drag to move along the circumference
Range of
upper and
lower limit of
luminosity
Drag to
move up or
down
Luminosity level of the adjustment
point selected in step 2
Within the frame is the range of effect
15
Introduction
Preparing
a Sample
Basic
Windows
Pre-adjustments
Image
Characteristics
Saving
Preferences
Reference
Contents
4
Adjust the color.
«The color is adjusted to the range specified in step 3 and the
color of the image changes.
O When dragging the slider, the point before adjustment [ ] and
the point after adjustment [ ] will be displayed on the color
wheel.
Drag to the left or right to adjust
5
Check the range of application.
O If you checkmark [Show affected area on images], the range of
application of the adjusted color blinks on the image.
6
Repeat steps 2 to 5 to adjust multiple colors.
O You can select and adjust colors for up to 100 spots.
O When using EOS Utility’s Remote Live View function with PSE to
edit Picture Styles, the [Show affected area on images] checkbox
is not displayed, and you cannot check the range of application of
adjusted colors.
O You can also specify the color to be adjusted in the method
different from the one explained in step 2 (p.16).
16
Introduction
Preparing
a Sample
Basic
Windows
Pre-adjustments
Image
Characteristics
Saving
Preferences
Reference
Contents
In addition to specifying the adjustment point by clicking the color on the
image (p.14), you can also specify the color directly on the color wheel
or by entering the color value.
Specifying the Color on the Color Wheel
Specifying the Color by Entering the Color
Value
1
Click the [ ] button (p.14).
2
Click the color you want to adjust on the color wheel.
«The selected color is displayed as an adjustment point [ ] on
the color wheel.
1
Select the [Edit] menu ` [Specify the numerical
values for color adjustment].
«The [Specify the numerical values for color adjustment] window
appears.
2
Enter the color value.
«The entered color value is displayed as an adjustment point [ ]
on the color wheel.
Specifying the Color Directly
In addition to displaying colors before and after adjustment, the
adjustment color list (p.8) shows overlapped range of effect of adjusted
colors, and has a checkbox for specifying whether applying adjusted
colors or not.
Overlapped Range of Effect of Adjusted
Colors
When you select an adjusted color from the list and [ ] appears, the
range of effect of the adjusted color (p.14) is overlapping with the range
of effect of other adjusted colors.
Moreover, the overlapped areas will be displayed in gray on the color
wheel and an adjustment combining the original adjustments is applied.
To avoid an overlapped ranges of effect, select the subject color with
[ ] and adjust it again so that the range of effect of the hue and
saturation no longer overlap.
Deleting an Adjusted Color
Be aware that you cannot recover deleted colors.
From the list, select the adjusted color you want to
delete and then press the <delete> key on the
keyboard.
«The selected adjusted color is deleted.
Displaying the Adjustment Color List and its Functions
Color after adjustment
Color before adjustment
Displays overlapped range of effect of adjusted colors
Remove the checkmark to disable the adjustment
17
Introduction
Preparing
a Sample
Basic
Windows
Pre-adjustments
Image
Characteristics
Saving
Preferences
Reference
Contents
You can select the color display mode which will be the basis for color
adjustment from three options (HSL, Lab, or RGB) as well as checking
values for adjusted colors.
O When “HSL” is selected for the color display mode, you can only
change the color value for before adjustment by entering a
number.
Color Display Mode
Switches the color display mode
Color value before adjustment
Color value after adjustment
O HSL is a color display mode using the three elements of hue (H),
saturation (S), and luminosity (L).
O Lab is a color mode developed by the CIE (Commission
Internationale d’Eclairage) where L is for lightness, a for color
elements from green to magenta, and b for color elements from
blue to yellow.
O RGB is a color display mode using red (R), green (G) and blue
(B), the three primary colors (additive colors) of the visible light
spectrum.
You can adjust the brightness and contrast for the luminosity of the
entire image using the tone curve. To further adjust contrast and
brightness after adjusting image characteristics with the [Six Color-
Axes] tab sheet or [Specific Colors] tab sheet, use the tone curve in this
[Specific Colors] tab sheet.
Adjust the brightness and contrast.
«The brightness and contrast of the image change.
O The horizontal axis shows the input level and the vertical axis
shows the output level.
O The maximum number of [ ] is 10.
O To delete a [ ], select the [ ] and then either press the
<delete> key on the keyboard or double-click on the [ ].
Adjusting the Gamma Characteristic for Luminosity
Click to add a [ ]
(adjustment point) and
adjust by dragging
The value of the
selected point (you can
also enter numerical
values)
18
Introduction
Preparing
a Sample
Basic
Windows
Pre-adjustments
Image
Characteristics
Saving
Preferences
Reference
Contents
Saving the Adjustments as a Picture Style File
Adjustments specified in the [Tool palette]
(p.10 to p.17)
are saved on your
computer as an original Picture Style file (extension “.PF2” or ".PF3").
The adjustments are saved as a Picture Style file which is separate from
the sample image, and the sample image used to perform the
adjustments is not affected at all.
1
Click the [ ] button.
«The [Save Picture Style file] window appears.
2
Specify the name and destination and then click the
[Save] button.
O Only one-byte characters can be entered in the [Save As],
[Caption], and [Copyright] boxes.
O If you do not want to show the settings adjusted in PSE,
checkmark [Disable subsequent editing] and save, so that the file
cannot be opened again in PSE.
«The file is saved as a Picture Style file in the specified save
destination.
After adjusting with the tone curve in the [Basic] tab sheet or with
the [Six Color-Axes] tab sheet, save results in .PF3 file format.
Results are not saved if saved in .PF2 file format.
Even if you checkmark [Disable subsequent editing] and save, you
can use the Picture Style file the same way as the Picture Style file
without chekmarking and saved (Description on the right). However,
you will no longer be able to open the Picture Style file in PSE. For
this reason, we recommend that you save separately beforehand the
Picture Style file without checkmarking [Disable subsequent editing].
Using a Picture Style File
Saved Picture Style files can be registered in the camera and applied to
shot images. They can also be applied to RAW images using DPP.
Picture Style files saved on your computer can be registered to the
“Camera that has a Picture Style function settings” (For information on
whether your camera is equipped with the Picture Style function, refer to
the camera’s Instruction Manual.) using EOS Utility and applied to shot
images.
Refer to “Applying Picture Style Files to the Camera” of “Chapter 2
Setting the Camera from Your Computer” in “EOS Utility Instruction
Manual” (PDF electronic manual) for details on operation.
Picture Style files saved on your computer can be applied to RAW
images using DPP.
Refer to “Using a Picture Style File” of “Chapter 3 Advanced Image
Editing and Printing” in “Digital Photo Professional Instruction Manual”
(PDF electronic manual) for details on operation.
Registering a Picture Style File to the Camera
Using a Picture Style File with DPP
19
Introduction
Preparing
a Sample
Basic
Windows
Pre-adjustments
Image
Characteristics
Saving
Preferences
Reference
Contents
Preferences
You can perform color management settings such as specifying the
work color space for the sample image displayed in the main window, or
setting the profile for the monitor.
1
Select the [Picture Style Editor] menu ` [Preferences].
«The [Preferences] window appears.
2
Specify the required settings and then click the [OK]
button.
«The settings are applied.
If you have changed the work color space during the adjustment
process, the adjustment point on the color wheel may move in
conjunction with the selected work color space.
Quitting PSE
In the main window, select the [Picture Style Editor]
menu ` [Quit Picture Style Editor].
«PSE quits.
20
Introduction
Preparing
a Sample
Basic
Windows
Pre-adjustments
Image
Characteristics
Saving
Preferences
Reference
Contents
Reference
If PSE is not operating correctly, refer to the items below.
O You cannot install software unless you are logged into an account with
Administrator privileges. Log in again into an account with
Administrator privileges. For how to log in and how to specify
Administrator settings, refer to the users manual for the Macintosh
computer you are using or for Mac OS X.
O PSE does not operate correctly on a computer if its system
requirements are not met. Use PSE on a computer with compatible
system requirements (p.2).
O Even if your computer has the RAM capacity (memory) described in
the system requirements (p.2), if other applications are running at the
same time as PSE, you may not have sufficient RAM (memory). Quit
any applications other than PSE.
O Sample images that are not supported by PSE (p.2) do not display.
Installation could not be completed correctly
PSE does not work
Images do not display properly
Troubleshooting
O Quit any applications before uninstalling the software.
O To uninstall the software, log in with Administrator privileges.
O To prevent computer malfunctions, always restart your computer after
you have uninstalled the software. Re-installing the software without
first restarting your computer is particularly likely to result in computer
malfunctions.
1
Display the folder in which the software is saved.
«Open the [Canon Utilities] folder.
2
Drag the [Picture Style Editor] folder to the Trash.
3
Select the [Finder] menu on the desktop ` [Empty
Trash].
«The software is deleted.
4
Restart your computer.
Deleting the Software (Uninstalling)
21
Introduction
Preparing
a Sample
Basic
Windows
Pre-adjustments
Image
Characteristics
Saving
Preferences
Reference
Contents
O You cannot retrieve data that you have emptied into the Trash
and deleted, so be particularly careful when deleting data.
O You cannot install the software again if you have just moved the
[Picture Style Editor] folder to the Trash. Be sure to select the
[Finder] menu ` [Empty Trash].
About This Instruction Manual
O It is prohibited to reproduce, in whole or part, the contents of this
Instruction Manual without permission.
O Canon may change without notice the software specifications and
contents of this Instruction Manual.
O The software screens and displays printed in this Instruction Manual
may differ slightly from the actual software.
O The content of this Instruction Manual has been reviewed thoroughly.
However, if you should notice any errors or omissions, please contact
a Canon Service Center.
O Please note that irrespective of the above-mentioned, Canon does
not take responsibility for the outcome of the operation of the
software.
Trademark Acknowledgments
O Macintosh is a trademark of Apple Inc., registered in the United States
and other countries.
O Other names and products not mentioned above may be registered
trademarks or trademarks of their respective companies.
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Canon Picture Style Editor - versie 1.14 - MAC bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Canon Picture Style Editor - versie 1.14 - MAC in de taal/talen: Engels als bijlage per email.

De handleiding is 2,08 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Canon Picture Style Editor - versie 1.14 - MAC

Canon Picture Style Editor - versie 1.14 - MAC Gebruiksaanwijzing - Nederlands - 21 pagina's

Canon Picture Style Editor - versie 1.14 - MAC Gebruiksaanwijzing - Deutsch - 21 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info