1-8
This machine provides an energy saver function. When no operations are performed for about 5 minutes, the
machine automatically enters the energy saver mode.
• The time until the machine enters the energy saver mode can be specified in a range of 3 minutes to 30
minutes. You can also turn off the energy saver function. (→ p. 9-4)
• The energy saver function does not activate when the machine is in the following status:
– When printing out copies or other pages
– While a copy job is saved in memory or when the reserve copy or other functions are operating
– When paper jams occur
– When no paper is loaded in the cassette or multi-purpose tray
– When PRESS SET KEY is displayed
Setting the Energy Saver Mode Manually
Restoring from the Energy Saver Mode
Energy Saver Mode
1
Press Energy Saver.
• The LCD is turned off and the Energy Saver key lights up.
• Right after the machine is restored from the energy saver mode, or right after copying finishes, wait
about 2 seconds before pressing Energy Saver.
1
Press Energy Saver.
• The Energy Saver key goes off and the machine enters standby mode.
• The machine can be restored from the energy saver mode immediately. However, it may vary according
to room temperature and circumstances.
