Install the FX3 cartridge.
1 Lift the latch and open the front cover.
2 Remove the cartridge from its protective bag.
3 Gently rock the cartridge from side to side a few times to distribute the toner
evenly inside it.
• Print quality may be poor if the toner is unequally distributed.
4 Place and hold the cartridge on a flat, clean surface, then gently pull on the
plastic tab to remove the plastic seal.
5 Hold the cartridge by its handle and insert it into the machine as far as it will go,
making sure that its side tabs are aligned with the guides inside the machine.
6 Use both hands to close the front cover.
NOTE
• Do not open the
drum protective
shutter on the car-
tridge.
NOTE
• Use a firm, even pull to
remove the seal.
