683262
210
Verklein
Vergroot
Pagina terug
1/236
Pagina verder
Digital Cinema Camera
Instruction Manual
Firmware ver. 1.0.5.1.00
PUB. DIE-0504-000F
2
COPYRIGHT WARNING:
Unauthorized recording of copyrighted materials may infringe on the rights of copyright owners and be
contrary to copyright laws.
Trademark Acknowledgements
SD, SDHC and SDXC Logos are trademarks of SD-3C, LLC.
Canon is an authorized licensee of the CFast 2.0 trademark, which may be registered in various
jurisdictions.
Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation in the United
States and/or other countries.
Apple and macOS are trademarks of Apple Inc., registered in the U.S. and other countries.
Wi-Fi is a registered trademark of the Wi-Fi Alliance.
JavaScript is a trademark or registered trademark of Oracle Corporation, its affiliates or subsidiaries in the
United States and other countries.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of
HDMI Licensing Administrator, Inc. in the United States and other countries.
Other names and products not mentioned above may be trademarks or registered trademarks of their
respective companies.
This device incorporates exFAT technology licensed from Microsoft.
This product is licensed under AT&T patents for the MPEG-4 standard and may be used for encoding MPEG-
4 compliant video and/or decoding MPEG-4 compliant video that was encoded only (1) for a personal and
noncommercial purpose or (2) by a video provider licensed under the AT&T patents to provide MPEG-4
compliant video. No license is granted or implied for any other use for MPEG-4 standard.
3
Highlights of the Camera
The Canon EOS C200 / EOS C200B Digital Cinema Camera is the latest camera in the highly-respected Cinema
EOS line. Cinema EOS cameras are increasingly relied upon by industry professionals due to their state-of-the-art
technology and the cameras’ high quality. The C200 / C200B continues that tradition by offering many features
that will help you articulate your creative vision.
4K Recording System with Cinema Quality
Advanced 4K-compatible Super-35mm-equivalent
CMOS sensor
At the heart of the camera is a Super-35mm-
equivalent CMOS sensor and two DIGIC DV 6 image
processors, which enable the camera to capture
and process video at an effective pixel count of 8.85
megapixels (4096x2160) and offer a center
resolution of 1,800 TV lines
1
. The sensor integrates
noise-reduction technology that allows you to record
video at sensitivity levels from ISO 160 to
ISO 25600
2
.
1
Varies depending on the lens used.
2
The ISO speed range can be extended up to ISO 100 on
one end, and ISO 102400 on the other.
Interchangeable lenses
Enjoy the freedom of using interchangeable lenses
to achieve the look you want. The C200 / C200B
features an EF lens mount allowing you to use over
100 high-quality lenses from the Canon Cinema
Lens series and EF Lens series.
Multiple recording formats
The camera offers you a choice of the recording
format, depending on your project’s requirements.
The camera records 4K RAW data using the newly
developed Cinema RAW Light
3
(hereafter, referred
to as RAW) format, directly to the CFast Card. The
RAW data that the camera records is a proprietary
format and is even suitable as HDR source material.
The second recording format is XF-AVC, which
boasts high compression while maintaining high
video quality. The third recording format is MP4, a
widely-used and versatile format.
3
Please note that the Cinema RAW Light data recorded
by this camera is different from the Cinema RAW data
recorded by other Cinema EOS cameras.
A variety of video and audio configuration options
(A 64)
RAW clips are recorded in 4096x2160 and,
depending on the frame rate, in 12- or 10-bit color
depth. Both MP4 and XF-AVC clips can be recorded
in 3840x2160 or 1920x1080 and in 8-bit color
depth. For details on available combinations of
frame size, frame rate and color depth, see the
video configuration settings tables (A 65). The
camera records audio in 4-channel linear PCM or
2-channel MPEG-2 AAC-LC (MP4 clips only). With
such versatile options, the camera is sure to offer
you a configuration that meets your project’s needs
and shooting style.
Recording media
The camera records RAW clips to a CFast 2.0 card
or MP4 clips and XF-AVC clips to an SD card.
Because the camera is equipped with two SD card
slots, you can use two SD cards to continue
recording on the other card when the one being
used becomes full (relay recording) or to record the
same clip simultaneously on both cards to have a
backup recording (double slot recording)
4
(A 51).
While you record primary clips on a CFast card, you
can simultaneously record proxy clips—smaller files
(2048x1080) for offline editing—on an SD card
(A 113).
4
Relay recording and double slot recording are not
available for proxy clips.
Operability and Adaptability
Freely customizable compact design
The modular components, such as the LM-V1 LCD
Monitor
5
, LA-V1 LCD Attachment Unit
5
, HDU-2
Handle Unit
5
and GR-V1 Camera Grip
5
, will let you
expand and adapt the camera’s configuration to
match your shooting conditions (A 36).
5
Supplied accessory for the C200; optional accessory for
the C200B.
Assignable buttons
The camera and modular units feature a number of
buttons (on the camera’s body, LCD monitor and
camera grip) to which you can assign a large
number of functions (A 125). Assign functions that
you use often to the assignable buttons you find
most convenient to personalize the camera to your
needs and preferences.
Dual Pixel CMOS AF
The camera features Dual Pixel CMOS AF and offers
various autofocus functions (A 80): Continuous AF,
One-shot AF (to use autofocus only when you
choose) or AF-boosted MF (to let you focus
manually most of the way and let the camera finish
focusing automatically). Using AF-boosted MF the
camera does not perform unreliable focus
adjustments, resulting in a smoother focusing
operation than with continuous AF. The camera can
also focus automatically on people’s faces (Face AF,
A 87) and track moving subjects while keeping
them in focus.
4
You can control a number of AF-related settings
including AF frame size and position, and AF speed.
Even while focusing manually, the Dual Pixel Focus
Guide function (A 82) serves as a visual, intuitive
guide that you can use to check if the image is in
focus and the required adjustment, if it is not. This
can be very helpful to ensure you always get
amazingly sharp 4K video.
Remote operation
You can attach the optional RC-V100 Remote
Controller to the camera to control it from a
distance. The remote controller lets you control a
wide range of camera settings (A 123).
You can also operate the camera remotely via Wi-Fi
using the Browser Remote application (A 170).
Browser Remote lets you check the live view image
from the camera and adjust main camera settings.
Versatile Artistic Expression
Special recording modes
The special recording modes (A 114) give you
more creative control over your recordings. You can
create a slow motion effect in your recordings,
record a frame at a set interval (ideal for nature shots
and other subjects with little movement) or record a
frame every time you press a button (ideal for stop
motion animation).
Custom picture settings
The improved custom picture menu gives you even
more options to control the “look” of your images.
Select one of the preset picture settings or set the
combination of gamma curve, color space and color
matrix that you wish to use. Then, you can adjust a
number of other image-related parameters in detail.
Other Functions
Save XF-AVC clips with ease
Use the XF Utility software (A 158) to save XF-AVC
clips to a computer. The software even allows you to
organize your clips.
Software for aiding RAW production workflow
Cinema RAW Development (A 159) can develop
the recorded 4K RAW data and export it as a
standard file type such as DPX or OpenEXR. You
can also import an EDL to recreate an edit created
on NLE software. This helps make a smooth
transition to the color grading process.
Assistance functions
The camera offers a number of assistance functions,
such as peaking and magnification (A 82),
onscreen markers (A 90), zebra patterns (A 91)
and B&W image (A 42), that you can display on
the LCD monitor or viewfinder
6
, or output through
the SDI terminal to display on an external monitor.
When using a logarithmic gamma curve, you can
also apply a LUT (A 155) to the displays or video
output for easier monitoring.
6
k
only.
Other improved features
5 levels of ND filter (A 71).
In-camera correction for peripheral illumination
and chromatic aberration (A 39).
Monaural built-in microphone for note taking.
Three sets of customizable My Menu submenus
(A 34).
Menu settings file that can be saved in the camera
or on an SD card to restore all the menu settings
or replicate them perfectly on another C200 /
C200B camera (A 137).
Improved clip name format with more information
for easier identification and organization of clips
(A 61).
Battery packs compatible with Intelligent System
for better remaining usage time information.
5
1. Introduction 9
About this Manual 9
Conventions Used in this Manual 9
Supplied Accessories 11
Names of Parts 12
LM-V1 LCD Monitor and LA-V1 LCD Attachment
Unit 17
GR-V1 Camera Grip 18
HDU-2 Handle Unit 19
Microphone Holder 19
4K Workflow Overview 20
Color Grading with the ACES Workflow 21
2. Preparations 23
Preparing the Power Supply 23
Using a Battery Pack 23
Using a Power Outlet 26
Turning the Camera On and Off 27
Preparing the Handle Unit and LCD Monitor 28
Attaching the HDU-2 Handle Unit 28
Attaching and Removing the LM-V1 LCD
Monitor 28
Date, Time and Language Settings 31
Setting the Date and Time 31
Changing the Language 32
Using the Menus 33
Selecting an Option from the Menu 33
Using the Customized Submenu (My Menu) 34
Preparing the Camera 36
Configuring the Modular Units 36
Preparing the Lens 37
Using the LCD Monitor 40
k
Using the Viewfinder 40
Adjusting the LCD Screen or Viewfinder
(
k
only) 41
Using a Tripod 42
Removing and Attaching the GR-V1 Camera
Grip 43
Attaching the Microphone Holder 44
Attaching the Shoulder Strap 44
Removing and Attaching the Terminal Covers 45
Using the Optional EVF-V70 Electronic
Viewfinder 46
Preparing Recording Media 47
Compatible Recording Media 47
Inserting a CFast Card 48
Removing a CFast card 48
Inserting and Removing an SD Card 49
Initializing Recording Media 50
Switching Between the SD Card Slots 50
Relay Recording and Double Slot Recording 51
Checking the Remaining Recording Time on
Recording Media 51
Recovering Clips 52
Adjusting the Black Balance 53
3. Recording 55
Recording Video 55
Preparing to Record 55
Recording 56
Onscreen Displays 57
Setting the Clip File Name 61
Selecting the File Numbering Method for MP4
Clips and Photos 62
Using the Fan 63
Video Configuration: Video Format,
System Frequency, Frame Rate and
Resolution 64
Selecting the Main Recording Format 64
Selecting the System Frequency 64
Selecting the Frame Rate 64
Selecting the Resolution and Color Sampling
Settings 65
Changing Main Camera Functions with the
FUNC Button 66
Using the Direct Setting Mode 66
Shutter Speed 67
Changing the Shutter Speed Mode and Value 68
ISO Speed/Gain 69
Changing the ISO Speed or Gain Value 69
Using the Control Dial 70
ND Filter 71
Table of Contents
6
Adjusting the Aperture 72
Manual Aperture 72
Momentary Automatic Aperture - Push Auto
Iris 74
Automatic Aperture 74
Exposure Compensation - AE Shift 75
Light Metering Mode 76
White Balance 77
Custom White Balance 77
Color Temperature/Preset White Balance 78
Auto White Balance (AWB) 79
Adjusting the Focus 80
Manual Focus 81
One-Shot AF 84
AF-Boosted MF 84
Continuous AF 85
Changing the AF Frame Size and Position 86
Face Detection 87
Tracking a Specific Subject 88
Zooming 89
Onscreen Markers and Zebra Patterns 90
Displaying Onscreen Markers 90
Displaying Zebra Patterns 91
Setting the Time Code 92
Selecting the Time Code Mode 92
Selecting Drop or Non-Drop Frame 93
Putting the Time Code Display on Hold 93
Setting the User Bit 95
Recording Audio 96
Audio Settings and Recorded Audio Channels 96
Connecting an External Microphone or External
Audio Input Source to the Camera 98
Setting the Audio Input Type for the
INPUT 1/INPUT 2 Terminals 99
Selecting the Audio Format for Clips 99
Selecting the Audio Input Source for Audio
Channels 100
Adjusting the Audio Recording Level 101
Advanced Audio Input Settings 102
Monitoring the Audio with Headphones 104
Colors Bars/Audio Reference Signal 105
Color Bars 105
Audio Reference Signal 105
Waveform Monitor 106
Displaying the Waveform Monitor 106
Configuring the Waveform Monitor 106
Adding Marks to Recordings 108
Adding a Shot Mark while Recording 108
Adding an $ Mark or % Mark after
Recording 108
Using Metadata 109
Setting a User Memo Created with Canon XF
Utility 109
Entering Information About the Recording 110
Recording GPS Information (Geotagging) 111
Reviewing a Recording 112
Simultaneous Recording of Proxy Clips 113
Special Recording Modes 114
Slow Motion Recording Mode 114
Pre-recording Mode 115
Frame Recording Mode 116
Interval Recording Mode 117
Continuous Recording 118
Taking Photos 120
Photo Playback 121
Displaying the [Photos] Index Screen 121
Viewing Photos 121
Deleting Photos 122
Using the Optional RC-V100 Remote
Controller 123
4. Customization 125
Assignable Buttons 125
Changing the Assigned Function 125
Using an Assignable Button 126
Custom Picture Settings 129
Selecting Custom Picture Files 129
Preset Picture Settings 129
Editing a Custom Picture File’s Settings 130
Resetting Custom Picture Files 131
Renaming Custom Picture Files 131
Protecting Custom Picture Files 131
Copying Custom Picture Files 131
Embedding Custom Picture Settings in a
Clip 132
Available Custom Picture Settings 133
Saving and Loading Camera Settings 137
Saving Camera Settings 137
Loading Camera Settings 137
7
5. Playback 139
Playback 139
Clip Index Screen 139
Playing Back Clips 141
Onscreen Displays 141
Playback Controls 143
Adjusting the Volume 143
Clip Operations 144
Using the Clip Menu 144
Displaying Clip Information 145
Adding $ Marks or % Marks 146
Deleting an $ Mark or % Mark from a Clip 146
Adding Shot Marks 147
Deleting All Shot Marks in a Clip from the Index
Screen 147
Deleting Clips 147
Deleting the User Memo and GPS
Information 148
6. External Connections 149
Video Output Configuration 149
Recording Video Signal Configuration and Video
Output Configuration by Terminal 149
Playback Video Configuration and Video Output
Configuration by Terminal 150
Connecting to an External Monitor or
Recorder 152
Connection Diagram 152
Using the SDI Terminal 152
Using the HDMI OUT Terminal 153
Setting the Scan Mode of the Output Signal 154
HDR Output 154
Applying a LUT to Screens/Video Outputs 155
Output by terminal/device and HDR setting 155
Superimposing Onscreen Displays on Screens/
Video Outputs 156
Audio Output 157
Working with Clips on a Computer 158
Saving MP4 Clips 158
Saving XF-AVC Clips 158
Developing RAW Clips 159
7. Network Functions 161
About the Network Functions 161
Connecting to a Wi-Fi Network 162
Camera Access Point 163
Connecting in Infrastructure Mode 164
Wi-Fi Protected Setup (WPS) 165
Searching for Access Points 166
Manual Setup 167
Connecting to a Wired (Ethernet) Network 168
Selecting a Network Connection 169
Checking and Changing Network Settings 169
Browser Remote: Controlling the Camera from a
Network Device 170
Setting Up Browser Remote 170
Starting Browser Remote 171
Using Browser Remote 173
FTP File Transfer 182
Preparations 182
Transferring Clips (FTP Transfer) 183
8. Additional Information 185
Menu Options 185
Displaying the Status Screens 195
Troubleshooting 206
List of Messages 211
Handling Precautions and Safety Instructions 216
Maintenance/Others 220
Optional Accessories 221
Specifications 223
Appendix: Compatible Lenses and Functions 229
Reference Tables 230
Index 231
8
1
9
Introduction
About this Manual
Thank you for purchasing the Canon EOS C200 / EOS C200B*. Please read this manual carefully before you use
the camera and retain it for future reference. Should the camera fail to operate correctly, refer to
Troubleshooting
(A 206).
* Availability differs from area to area.
Conventions Used in this Manual
IMPORTANT: Precautions related to the camera’s operation.
NOTES: Additional topics that complement the basic operating procedures.
A: Reference page number.
l
: The icon refers to text and illustrations that apply only to the indicated model.
The following terms are used in this manual.
“Screen” refers to the LCD screen on the LCD monitor
1
and to the viewfinder
2
screen on the camera.
“SD card” refers to an SD, SDHC or SDXC memory card.
“Recording media” refers to CFast cards and SD cards.
“RAW data” refers to the data recorded using Cinema RAW Light.
Photographs in the manual are simulated pictures taken with a still camera. Some screenshots have been
altered to make them easier to read.
Illustrations in the manual show the Canon EOS C200 camera with the LM-V1 LCD Monitor
1
, LA-V1 LCD
Attachment Unit
1
, HDU-2 Handle Unit
1
, GR-V1 Camera Grip
1
and Canon EF 50mm f/1.4 USM lens attached.
1
Supplied accessory for the C200; optional accessory for the C200B.
2
l
The C200B is not equipped with a viewfinder but the optional EVF-V70 Electronic Viewfinder can be purchased
separately.
About this Manual
10
Operating modes
A shaded icon (like ) indicates that the function
described can be used in the operating mode shown
or for recordings made in the movie format shown in
the icon; a non-shaded icon (like ) indicates
that the function cannot be used. For details, refer to
Turning the Camera On and Off
(A 27) and
Selecting
the Main Recording Format
(A 64).
The arrow is used to abbreviate steps in
procedures. For a detailed explanation on how
to use the menus, refer to
Using the Menus
(A 33). For a concise summary of all available
menu options and settings, refer to the appendix
Menu Options
(A 185).
When a procedure requires selecting an option, the
available options are listed within or after the procedure.
Brackets [ ] are used to refer to menu options as they are
displayed on screen.
11
Supplied Accessories
Supplied Accessories
The following accessories are supplied with the camera. Note that some accessories are supplied only with the
C200.
About the lens kit: At the time of purchase, the lens kit is supplied with a lens (model number is on the product
box). Visit your local Canon website to download its instruction manual. Please note that the lens is also sold
separately so the supplied accessories listed in that instruction manual differ slightly from the accessories
supplied with the lens kit.
LM-V1 LCD Monitor
1
LA-V1 LCD Attachment Unit
1
UN-5 Unit Cable
1
HDU-2 Handle Unit
1
Microphone Holder
(incl. M4 fixation bolts (x 2))
GR-V1 Camera Grip
1, 2
(incl. grip attachment ring)
CA-A10 AC Adapter
(incl. power cord and ferrite core)
BP-A30 Battery Pack
(incl. terminal cover)
CG-A20 Battery Charger CA-CP200B Compact Power Adapter
(for the CG-A20; incl. power cord)
Eye Cup
1
Viewfinder Cap
1
Body Cap
2
Thumb Rest
3
Hex wrench (for 0.64 cm, 1/4"
screws), 0.64 cm (1/4") hex socket
head bolt, and bolt retainers (x4)
1
Tape Measure Hook
2
1
k
only.
2
Comes pre-attached to the camera.
3
l
Comes pre-attached to the camera.
SS-1200 Shoulder Strap
1
Names of Parts
12
Names of Parts
1
7
8
9
10
11
12
13
14
2
3
4
5
6
15 16 17 18 19 20
1 Tape measure hook and focal plane mark
2 MAGN. (magnification) button (A 83)/
Assignable button Camera 1 (A 125)
3 PEAKING button (A 83)/
Assignable button Camera 2 (A 125)
4 ND FILTER +/– buttons (A 71)
5 ZEBRA button (A 91)/
Assignable button Camera 3 (A 125)
6 WFM (waveform monitor) button (A 106)/
Assignable button Camera 4 (A 125)
7
Q
switch (A 27)
8 CFast card slot cover
9 CFast card slot (A 48)
10 Card release button for CFast card slot (A 48)
11 ISO/GAIN button (A 69)/
Assignable button Camera 5 (A 125)
12 SHUTTER (shutter speed mode) button (A 67)/
Assignable button Camera 6 (A 125)
13 CFast card slot cover switch
14 CFast access indicator
15 Control dial (A 70, 72)
16 REC (start/stop recording) button (A 56)
17 DISP (display) button (A 57, 141)/
Assignable button Camera 7 (A 125)
18 WB (white balance) button (A 77)/
Ò
(play/pause) button (A 141)
19 Exhaust ventilation outlet (A 63)
20 Å (white balance adjustment) button (A 77)/
INDEX button (A 140)/
Ñ
(stop) button (A 141)
13
Names of Parts
p15
1
2
3
4
5
6
7
9
8
11
12
13
14
15
16
17
18
19
10
1 INPUT 1 terminal (XLR) (A 98)
2 INPUT 2 terminal (XLR) (A 98)
3 SDI terminal (A 149, 152)
4
×
(headphone) terminal (A 104)
5USB terminal (A 111, 158)
6 (Ethernet) terminal (A 168)
7DC IN terminal (A 26)
8 (Ethernet) indicator (A 168)
9 REMOTE terminal
For connecting the optional RC-V100 Remote
Controller or commercially available remote
controllers.
10 HDMI OUT terminal (A 149, 153)
11 Screw holes for the microphone holder fixation
bolts
12 MIC (microphone) terminal (A 98)
13 Audio input selection switches for INPUT 1 and
INPUT 2 (A 99)
14 ANALOG (analog audio source selection) switches
for INPUT 1/INPUT 2 (A 99)
15 Focal plane mark
16 Air intake vent (A 63)
17 Camera grip attachment thread/Rosette (A 43)
Compliant with ARRI rosettes.
18 Camera grip connection terminal (A 43)
19 Speaker (A 188)
Names of Parts
14
1
4
5
6
7
8
9
10
2
3
EF lens mount
1 Tally lamp (A 56)
2VIDEO terminal (A 28)
3 PUSH AUTO IRIS (momentary automatic aperture)
button (A 74)/
Assignable button Camera 10 (A 125)
4 Built-in monaural microphone (A 103)
5 EF lens mount index (A 37)
6 EF-S lens mount index (A 37)
7 Lens release button (A 37)
8 EF lens lock pin (A 37)
9 EF lens contacts (A 37)
10 ONE-SHOT AF (focus automatically once) button
(A 84)/
Assignable button Camera 11 (A 125)
15
Names of Parts
4
1
2
3
13
14
16
17
18
15
5
6
7
8
9
10
11
12
4
16
17
18
5
6
7
8
9
k
l
1Eye sensor (A 40)
2Viewfinder (A 40, 41)
3 Dioptric adjustment lever (A 40)
4 Tally lamp (A 56)
5 FUNC (main functions) button (A 66)/
Assignable button Camera 8 (A 125)
6 Joystick (A 33)
7 CANCEL button (A 33)
8 MENU button (A 33, 125)
9 Cover for audio controls
10 AUDIO STATUS (display Audio status screen)
button (A 199)/
Assignable button Camera 9 (A 125)
11 Audio level switches for CH1 (top) and CH2
(bottom) (A 101)
12 Audio level dials for CH1 (top) and CH2 (bottom)
(A 101)
13 SD card slot A (left) and B (right) covers (A 48)
14 SD card slots (A 49)
In this manual, SD cards in each slot are referred
to as “SD card A” and “SD card B”, respectively.
15 SD CARD 2 (SD card slot A) and SD CARD 3
(SD card slot B) access indicators (A 49)
16 SLOT SELECT (SD card selection) button (A 50,
140)
17 BATTERY RELEASE button (A 25)
18 Battery compartment (A 25)
Names of Parts
16
45 9678 10
1 Tape measure hook
Use the hook to accurately measure the distance
from the focal plane.
2 Accessory socket
For mounting accessories with 1/4"-20 screws
(6.9 mm (0.27 in.) deep).
3 Strap mounts (A 44)
4 Screw holes for 1/4"-20 mounting screws (8.5 mm
(0.33 in.) deep)
5 Screw hole for 3/8"-16 mounting screws (10 mm
(0.39 in.) deep) (A 42)
6 TB-1 Tripod Base
7 Tripod socket for tripods with 0.95 cm (3/8 in.)
screws (5.5 mm (0.22 in.) deep) (A 42)
8 Screw hole for 1/4"-20 mounting screws (7 mm
(0.28 in.) deep) (A 42)
9 Tripod socket for tripods with 0.64 cm (1/4 in.)
screws (5 mm (0.20 in.) deep) (A 42)
10 Tripod base screws (A 42)
17
Names of Parts
LM-V1 LCD Monitor
1
and LA-V1 LCD Attachment Unit
1
1
Supplied accessory for the C200; optional accessory for the C200B.
1
8
9
10
2
3
4
5
6
7
1 LCD panel with touch screen (A 40, 41)
2 FUNC (main functions) button (A 66)/
Assignable button Monitor 1 (A 125)
3 MENU button (A 33, 125)
4 Joystick (A 33)
5 MIRROR (invert the displayed image) button
(A 40)
6 CANCEL button (A 33)
7 DISP (display) button (A 57, 141)/
Assignable button Monitor 2 (A 125)
8 Í mark for aligning the LCD monitor’s position
(A 28)
9 Screw hole for 1/4"-20 screws (11.2 mm (0.44 in.)
deep)
10 VIDEO terminal (A 28)
10
9
12
11
13
1
2
3
4
5
7
8
6
1 LCD attachment unit base 1 (A 28)
2 LCD attachment unit mount (A 28)
3 Sockets for the microphone holder (A 44)
4 Cable clamp (A 28)
5 LCD attachment unit lock screw (A 28)
6 LCD attachment base 2 (A 28)
7 LCD attachment unit pivot B (A 28)
8 Í mark for aligning the LCD monitor’s position
(A 28)
9 Pivot base fixation bolt
10 LCD monitor fixation bolt (A 28)
11 LCD attachment unit pivot A (A 28)
12 LCD monitor mount (A 28)
13 LCD attachment unit alignment marks
Names of Parts
18
GR-V1 Camera Grip
1
k
At the time of purchase, the camera grip is pre-attached to the camera.
1
Supplied accessory for the C200; optional accessory for the C200B.
1
4
5
6
7
8
9
10
2
3
1 Control dial (A 70, 72)
2 REC (start/stop recording) button (A 56)
3 Grip belt (A 44)
4 Joystick (A 33)/SET button (A 33)
5 FOCUS GUIDE button (A 82)/
Assignable button Grip 1 (A 125)
6 Rosette
Compliant with ARRI rosettes.
7 Lock screw (A 43)
8 Grip attachment ring (A 43)
9 Grip connection cable (A 43)
10 Connection plug (A 43)
19
Names of Parts
HDU-2 Handle Unit
1
1
Supplied accessory for the C200; optional accessory for the C200B.
2
With socket for 0.64 cm (1/4") screws
Microphone Holder
12134 5
67
1 Screw holes for 1/4"-20 screws (6 mm (0.24 in.)
deep; 4 in total on the handle unit.
2 Front accessory mount
2
Includes a screw hole for 1/4"-20 screws (8.8 mm
(0.35 in.) deep)
3 Top accessory shoe
4 Through-holes (8.8 mm (0.35 in.))
5 Rear accessory mount
Includes a screw hole for 1/4"-20 screws (8.8 mm
(0.35 in.) deep)
6 Lock screw
7 Thru-hole mounting holes for attaching the handle
unit to the camera (A 28)
1
3
2
1 Microphone lock screw (A 98)
2 Microphone holder (A 98)
3 Microphone cable clamp (A 98)
4K Workflow Overview
20
4K Workflow Overview
The following illustrates the typical 4K workflow for this camera.
Shoot in 4K mode (A 64).
You can record 4K RAW on a CFast card or 4K YCbCr 4:2:0 data on an SD card in the camera, or
record 4K data using an external 4K recorder connected to the camera’s HDMI OUT terminal
(A 152).
In addition to the primary 4K recording to the CFast card, you can record simultaneously 2K proxy
clips on an SD card in the camera (A 113).
When the proxy clip is XF-AVC format, the file names of the primary and proxy clips will be similar (A 61).
When the primary clip is XF-AVC format, proxy clip recording is not available.
After recording on a CFast card, develop the CFast card data using the Cinema RAW Development
software (A 159) to generate full-quality data.
You can also generate proxy data with the software.
Perform color grading based on the full-quality data.
Operating modes:
Recording Post-production
CFast card
4K RAW
data
SD card
EDL
NLE software
4K recording
(RAW)
Cinema
RAW
Development
Color
grading
External 4K
recorder
2K
2
recording
(MP4 or
XF-AVC)
Full-quality
data
Proxy data
Full-quality
data
Proxy
data
1
For MP4 and XF-AVC recordings, the resolution is 3840x2160.
2
For proxy recordings, the resolution is 2048x1080.
HDMI OUT
terminal
RAW plugin
4K
1
recording
4K recording
(XF-AVC)
YCbCr 4:2:0
data
SD card
Full-quality
data
21
4K Workflow Overview
Color Grading with the ACES Workflow
ACESproxy: ACESproxy video data that is output from the SDI terminal when performing on-set color
grading. Select the [LUT: ACESproxy] option for the LUT setting, depending on where the
video is to be output (A 155).
Input Transform: Refers to the table used for converting color information of the input device to ACES2065-1
color space.
Output Transform: Refers to the table used for mapping ACES2065-1 color space information to the specific
color information scheme used by the display device.
ASC-CDL: Refers to the list that contains color grading adjustment data. This step requires equipment
compatible with ASC-CDL.
Cinema RAW
Development
Color grading
Post-production
On-set Color Grading
ACESproxy
Inverse log ASC-CDL
Output
Transform
SDI terminal
RAW
data
OpenEXR
(ACES 1.0)
Input
Transfor m
ASC-
CDL
Output
Transfor m
CFast card
SD card
MP4 or
XF-AVC data
Input
Tra ns fo rm
4K Workflow Overview
22
2
23
Preparations
Preparing the Power Supply
You can power the camera using a battery pack or directly using the AC adapter. If you connect the AC adapter
to the camera while a battery pack is attached, the camera will draw power from the power outlet.
Using a Battery Pack
You can power the camera using the supplied BP-A30 Battery Pack or the optional BP-A60 Battery Pack. Both
battery packs are compatible with Intelligent System so you can check the approximate remaining battery usage
time (in minutes) on the screen. For more accurate readings, when using a battery pack for the first time, charge
it fully and then use the camera until the battery pack is completely exhausted.
Charging the Battery Pack
Charge battery packs using the supplied CG-A20 Battery
Charger and CA-CP200B Compact Power Adapter. Before
charging, remove the terminal cover of the battery pack.
1 Connect the power cord to the CA-CP200B Compact Power
Adapter.
For North America: Make sure you use the power cord for
the CA-CP200B. See the sidebar below for information on
differentiating the supplied power cords.
2 Connect the DC plug of the CA-CP200B Compact Power
Adapter to the battery charger.
3 Plug the power cord of the CA-CP200B Compact Power
Adapter into a power outlet.
4 Attach the battery pack to the CG-A20 Battery Charger.
Press lightly and slide the battery pack in the direction of
the arrow until it clicks.
The CHARGE indicator starts flashing and also indicates
the battery pack’s approximate charge. The indicator will
stay on when charging has completed.
approx. 0% to 49%: Flashes once every 2 seconds
approx. 50% to 74%: Flashes twice every 2 seconds
approx. 75% to 99%: Flashes 3 times every 2 seconds
5 Remove the battery pack from the battery charger.
6 Unplug the power cord from the power outlet and disconnect the DC plug from the battery charger.
7 Disconnect the power cord from the compact power adapter.
CHARGE indicator
Compact power adapter
Preparing the Power Supply
24
IMPORTANT
Do not connect to the battery charger any product that is not expressly recommended for use with this
camera.
When using the battery charger or compact power adapter, do not fix it permanently to one place as this may
cause a malfunction.
To prevent equipment breakdowns and excessive heating, do not connect the supplied battery charger or AC
adapter to voltage converters for overseas travels or special power sources such as those on aircraft and
ships, DC-AC inverters, etc.
NOTES
We recommend charging the battery pack in temperatures between 10 ºC and 30 ºC (50 ºF and 86 ºF).
Outside the temperature range of 0 ºC to 40 ºC (32 ºF to 104 ºF), charging will not start.
If there is a malfunction with the battery charger, compact power adapter or battery pack, the charge indicator
will go out and charging will stop.
For handling precautions regarding the battery pack, refer to
Battery Pack
(A 218).
For approximate charging times, refer to the
Reference Tables
(A 230). For approximate recording times with
a fully charged battery pack, refer to the
Specifications
(A 226).
Charged battery packs continue to discharge naturally. Therefore, charge them on the day of use, or the day
before, to ensure a full charge.
We recommend that you prepare battery packs to last 2 to 3 times longer than you think you might need.
Repeatedly charging and discharging the battery pack will eventually shorten its battery life. You can check the
battery life on the [Battery/Hour Meter] status screen (A 202). Fully charging the battery pack and then
discharging it completely will give you a more accurate reading.
USA and Canada only: The Lithium ion/polymer battery that powers the product is recyclable.
Please call 1-800-8-BATTERY for information on how to recycle this battery.
Differentiating the Supplied Power Cords (for North America)
The CA-A10 AC Adapter and CA-CP200B Compact Power Adapter each include a power cord. The plug for
the CA-A10’s power cord has a socket with a straight side, while the plug for the CA-CP200B’s power cord
has circular sockets.
CA-A10 power cord plug CA-CP200B power cord plug
25
Preparing the Power Supply
Attaching the Battery Pack
1Set the
Q
switch to OFF.
2 Insert the battery pack all the way into the compartment as
shown in the illustration and press it gently toward the left
until it clicks.
Removing the Battery Pack
1Set the
Q
switch to OFF.
2 Holding down the BATTERY RELEASE button, slide the
battery pack toward the right and then pull it out.
Preparing the Power Supply
26
Checking the Remaining Battery Charge
When the camera is turned on, you can check the approximate remaining battery usage time (in minutes) by
looking at any recording/playback screen or the [Battery/Hour Meter] status screen (A 202). You can also
check the approximate charge level on the battery pack itself.
Press the CHECK button on the battery pack. An
indicator will light for approximately 3 seconds and show
the approximate remaining battery charge.
0-25%
26-50%
51-75%
76-100%
Using a Power Outlet
You can also power the camera directly from a power outlet using the supplied CA-A10 AC Adapter. While the
camera is powered using a power outlet, you can replace the battery pack even when the camera is turned on.
North America only: The power cord for the CA-A10 AC Adapter is different from that for the CA-CP200B
Compact Power Adapter. If you do not use the correct power cord, it will not connect to the AC adapter.
Attaching the Ferrite Core
Before using the supplied CA-A10 AC Adapter, attach the supplied ferrite core to the power cord. This can help
reduce the likelihood of RF interference.
1 Attach the ferrite core to the power cord about 4 cm (1.6 in.) from the plug that
goes into the AC adapter.
2 Pass the cable through the center of the core and wrap it around the core
twice and close the ferrite core.
For use in North America, you only need to wrap the cable around the core
once.
CHECK buttonBattery charge
indicator
4 cm
27
Preparing the Power Supply
Connecting the CA-A10 AC Adapter
1Set the
Q
switch to OFF.
2 Connect the AC adapter’s DC plug to the DC IN
terminal on the camera.
Align the cable so the red dot on the plug is facing
up.
To disconnect the AC adapter, pull back the
metallic tip of the plug and then disconnect the
cable from the terminal.
3 Connect the power cord to the AC adapter and plug
it into a power outlet.
IMPORTANT
Make sure to turn off the camera before connecting
or disconnecting the AC adapter.
When using the AC adapter, do not fix it permanently
to one place as this may cause a malfunction.
Turning the Camera On and Off
The camera has two operating modes: CAMERA ( ) mode for making recordings and MEDIA ( )
mode for playing back recordings. Select the operating mode using the
Q
switch.
To turn on the camera
Set the
Q
switch to CAMERA for mode or
MEDIA for mode.
To turn off the camera
Set the
Q
switch to OFF.
CAMERA mode MEDIA mode
DC IN
terminal
AC adapter
Preparing the Handle Unit and LCD Monitor
28
Preparing the Handle Unit and LCD Monitor
Attaching the HDU-2 Handle Unit
1 Attach the handle unit to the camera.
2 Use the hex wrench
1
(for 0.64 cm, 1/4" screws) and turn the lock
screw and hex socket head bolt
1
to secure the handle unit firmly.
1
Supplied with the HDU-2.
NOTES
The handle unit has 0.64 cm (1/4") sockets, giving you the option to
attach a variety of commercially available accessories.
The handle unit has two through-holes (8.8 mm (0.35 in.)) that are
35.5 mm (1.4 in.) apart center-to-center.
Attaching and Removing the LM-V1 LCD Monitor
By attaching the LA-V1 LCD Attachment Unit
1
to the LM-V1 LCD Monitor
1
, you can attach the LCD monitor to
the HDU-2 Handle Unit
1
or directly to the camera body itself. For details on adjusting the LCD monitor, refer to
Using the LCD Monitor
(A 40) and
Adjusting the LCD Screen or Viewfinder
(A 41).
1
Supplied accessory for the C200; optional accessory for the C200B.
Attaching the LCD Monitor
To attach the LCD monitor to the handle unit
1 Set the
Q
switch to OFF.
2 Rotate the LCD monitor mount 180° toward the LCD
attachment unit lock screw () and attach the LCD
monitor ().
•Align the
Í
marks on the LCD monitor and LCD
monitor mount.
Use the hex wrench
1
(for 0.64 cm, 1/4" screws) to secure it firmly with the LCD monitor fixation bolt on the
LCD monitor mount.
1
Supplied with the HDU-2.
Based on your needs, you can mount the LCD monitor so that it faces toward or away from you.
29
Preparing the Handle Unit and LCD Monitor
3 Align the LCD attachment unit mount to the handle units front accessory mount and then use the wrench to
tighten the LCD attachment unit lock screw ().
4 Rotate the LCD monitor mount 180° toward the handle
unit ().
5 Using the UN-5 Unit Cable
2
, connect the camera’s
VIDEO terminal to the LCD monitor’s VIDEO terminal ().
2
Supplied accessory for the C200; optional accessory for the
C200B.
•Align the
Í
marks on the cables’ plugs and terminals.
Put the cable though the LCD attachment unit’s cable
clamp (). If necessary, adjust the position of the
cable so that it does not get in the way of the lens.
NOTES
Depending on the situation, the screws may become
loose. If necessary, use the hex wrench (for 0.64 cm,
1/4" screws) to tighten them.
To attach the LCD monitor to the camera
1Set the
Q
switch to OFF.
If the handle unit is attached to the camera, remove it.
2 Remove LCD attachment unit base 2 ().
Use a hex wrench (for 0.64 cm, 1/4" screws)
1
.
1
Supplied with the HDU-2.
3 Attach LCD attachment unit base 2 to the camera ().
Use the hex wrench to secure it firmly with the hex socket
head bolt.
4 Rotate LCD attachment unit pivot B 90° toward the SD card
slots and then rotate the LCD monitor mount 180° toward
the tape measure hook ().
Preparing the Handle Unit and LCD Monitor
30
5 Attach the LCD monitor.
Use the socket for 1/4"-20 screws on the bottom of
the LCD monitor.
Use the hex wrench to secure it firmly with the hex
socket head bolt.
6 Rotate LCD attachment unit pivot A 180° toward the SD
card slots and then rotate pivot B 90° toward the lens
().
7 Using a UN-5 Unit Cable
2
, connect the camera’s VIDEO
terminal to the LCD monitor’s VIDEO terminal ().
2
Supplied accessory for the C200; optional accessory for the
C200B.
•Align the
Í
marks on the cables’ plugs and
terminals.
Removing the LCD Monitor and LCD Attachment
Unit
1 Set the
Q
switch to OFF.
2 Disconnect the unit cable from the camera’s and monitor’s
VIDEO terminal ().
Pull back the metallic tip of the plug and then disconnect
the cable from the terminal.
3 Unscrew the LCD attachment lock screw and then remove
the LCD attachment unit and monitor ().
IMPORTANT
Be careful not to drop the camera when attaching or
removing the LCD monitor.
31
Date, Time and Language Settings
Date, Time and Language Settings
Setting the Date and Time
You will need to set the date and time on the camera before you can start using it. When the internal clock is not
set, or if the settings were lost because the lithium button battery is depleted, the [Date/Time] screen will appear
automatically with the time zone selected when you turn on the camera.
1 Push the joystick up/down to select the desired time zone and then press the joystick itself to move
to the next field.
To move to the next field you can also push the joystick right.
The default time zone is [UTC-05:00] (New York) or [UTC+01:00] (Central Europe), depending on the
country/region of purchase. Time zones are based on Coordinated Universal Time (UTC).
2 Change the rest of the fields in the same way.
3 Select [Set] and then press the joystick to start the clock and close the screen.
NOTES
You can display the date/time in mode with the > [
¢%
Monitoring Setup] > [Custom
Display 2] > [Date/Time] setting and in mode with the > [
¢$
Monitoring Setup] >
[Custom Display] > [Date/Time] setting.
With the following settings, you can change the time zone, date and time also after the initial setup. You can
also change the date format and clock format (12 or 24 hours).
- > [
B
!
System Setup] > [Time Zone], [Date/Time] and [Date Format]
When the built-in rechargeable lithium battery is exhausted, the date and time setting may be lost. In such
case, recharge the built-in lithium battery (
A 219) and set the time zone, date and time again.
Using the optional GP-E2 GPS Receiver, you can have the camera adjust settings automatically according to
the UTC date/time information received from the GPS signal (A 111).
Operating modes:
Date, Time and Language Settings
32
Changing the Language
The camera’s default language is English. You can change it to German, Spanish, French, Italian, Polish,
Portuguese, Russian, Simplified Chinese, Korean or Japanese. Please note that some settings and screens will
be displayed in English, regardless of the language setting.
1 Press the MENU button.
2 Push the joystick up/down to select [
B
!
System Setup] and then press the joystick.
3 Select [Language
H
] in a similar fashion and then press the joystick.
4 Push the joystick up/down to select a language.
5 Press the joystick to change the language and then press the MENU button to close the menu.
Operating modes:
33
Using the Menus
Using the Menus
Many of the camera’s functions can be adjusted from the menu that opens after pressing the MENU button. In
mode, you can also register frequently used menu settings in a customized submenu (My Menu) for
easy access. For details about the available menu options and settings, refer to
Menu Options
(A 185).
Selecting an Option from the Menu
The following is a step-by-step explanation of how to select an option from the menu for most menu items. For
some menu items, refer also to the function’s description for additional operations that may be necessary. In the
procedures throughout the rest of this manual, closing the menu is assumed and not included in the procedure.
1 Press the MENU button.
The menu opens with the orange selection frame indicating the menu item that was selected the previous
time the menu was closed (unless the camera was turned off).
2 Push the joystick left/right to select the desired submenu.
To select a different submenu, push the joystick up/down repeatedly or press the CANCEL button until the
current submenu icon is highlighted in orange.
3 If the orange selection frame does not appear on a menu item in the submenu, push the joystick
down or press the joystick.
The orange selection frame will appear on a menu item.
Operating modes:
CANCEL button
Press to return to the previous menu/
submenu level or to stop some
operations that are in progress.
MENU button
Press to open the menu and then press
again to close the menu after adjusting
desired settings.
Joystick
Push the joystick to move the orange selection frame in
the menu. Then, press the joystick itself to select the
menu item indicated by the orange selection frame.
CANCEL button
MENU button
Joystick
Joystick
Joystick
Using the Menus
34
4 Push the joystick left/right to select the desired “page” number and then up/down to select the
desired menu item.
5 Press the joystick.
Setting options will appear with a
Ð
mark next to the currently selected option.
6 Push the joystick up/down to select the desired setting option and then press the joystick.
7 Press the MENU button to close the menu.
NOTES
For brevity’s sake, references in the text to settings in the setup menus will include only the tab of the desired
menu, page number and the setting name. For example, “You can adjust the date and time later on with the
> [
B
! System Setup] > [Date/Time] setting.”
Unavailable items may appear grayed out.
Pressing the MENU button at any time closes the menu.
On some screens, the following icons may be displayed as a guide: , , . They refer, respectively,
to pressing the joystick (or SET button on the GR-V1 Camera Grip or a remote control), the MENU button and
the CANCEL button.
When an optional RC-V100 Remote Controller is connected to the camera, you can use the remote
controller’s up/down/left/right/SET buttons in the same way as the camera’s joystick. Pressing the SET button
is equivalent to pressing the joystick on the camera.
You can check most of the current settings on the status screens (A 195).
Using the Customized Submenu (My Menu)
You can register up to 6 frequently used menu settings under a My Menu submenu for easy access. You can
save up to 5 separate sets of My Menu settings so you can customize different options for different shooting
situations. Furthermore, if you set an assignable button to [My Menu] (A 125), you can press the button to
access your registered menu settings even faster and more easily.
Selecting a My Menu Set
1 Open the My Menu screen.
> [¥ My Menu]
2 Select the desired My Menu set and then press the joystick.
Adding Menu Settings
1 Open the My Menu [Register] screen.
> [¥ My Menu] * > [Edit] > [Register]
* Each My Menu set appears on a different page. Select the page that corresponds to the desired set.
Press the CANCEL button to cancel the operation and return to the regular menu.
2 Navigate the menus to find the menu setting you want to add and then press the joystick.
3 Select [OK] and then press the joystick twice.
The menu setting you registered will now appear under the currently selected My Menu set.
35
Using the Menus
Rearranging Menu Settings
1 Open the My Menu [Move] screen.
> [¥ My Menu] * > [Edit] > [Move]
* Each My Menu set appears on a different page. Select the page that corresponds to the desired set.
2 Push the joystick to select the setting you want to move and then press the joystick.
•The
]
icon will appear next to the setting you selected to move.
3 Push the joystick up/down to move the setting to the desired position and then press the joystick.
Removing Menu Settings
1 Open the My Menu [Delete] screen.
> [¥ My Menu] * > [Edit] > [Delete]
* Each My Menu set appears on a different page. Select the page that corresponds to the desired set.
2 Push the joystick to select the setting you want to remove and then press the joystick.
3 Select [OK] and then press the joystick twice.
Resetting the My Menu Submenu
1 Reset all the menu settings registered to the currently selected My Menu set.
> [¥ My Menu] * > [Edit] > [Reset All]
* Each My Menu set appears on a different page. Select the page that corresponds to the desired set.
2 Select [OK] and then press the joystick twice.
Renaming the Selected My Menu Set
You can give each of the 5 My Menu sets a more descriptive name to make them easier to identify.
1 Open the My Menu [Rename] screen.
> [¥ My Menu] * > [Edit] > [Rename]
* Each My Menu set appears on a different page. Select the page that corresponds to the desired set.
2 Enter the desired name (8 characters long) using the keyboard screen (A 35).
3 Select [OK] and then press the joystick.
Using the Virtual Keyboard Screen
1 Use the joystick to select a character and then press the
joystick to add it.
Push the joystick up/down/left/right to select the desired
character and press the joystick to enter it. Use the arrows (//
/) to change the position of the cursor and the backspace
character ( ) to delete the last character entered.
Repeat this step as necessary to enter the desired text.
Some characters will not be available, depending on the
function.
2 After entering the desired text, select [OK] and then press the joystick to close the keyboard
screen.
Current character / Character limit
Preparing the Camera
36
Preparing the Camera
This section outlines the basic preparations for the camera such as attaching a lens and attaching the modular
units to the camera: GR-V1 Camera Grip
1
, thumb rest, eye cup
1
, etc.
1
Supplied accessory for the C200; optional accessory for the C200B.
Configuring the Modular Units
Your camera is nothing if not versatile and you can choose the configuration that best fits your needs and
shooting conditions.
IMPORTANT
Be careful not to drop the camera or modular units when attaching,
removing or adjusting the various accessories. Use a table or other stable
surface to change the camera’s configuration.
NOTES
Compatibility with the optional SU-15 Shoulder Support Unit: The camera is
compatible with the optional SU-15 Shoulder Support Unit, which allows
you to use the camera in a shoulder-mounted fashion. Attach the SU-15
to the camera using the camera mount through holes close to the tripod
base. For details, refer to the SU-15’s instruction manual.
Configuration with
LCD monitor and camera grip
Configuration with LCD monitor,
camera grip and handle
Light configuration with grip
for hand-held shooting
Minimal configuration
with thumb rest
37
Preparing the Camera
You can use the optional RD-1 Rod Clamp to use the
camera with a commercially available viewfinder or other
accessories with a 15 mm (0.59 in.) rod.
Preparing the Lens
As much as possible, attach and remove the lens quickly and in a clean environment free of dust. Refer also to
the instruction manual of the lens used.
IMPORTANT
When attaching/removing a lens, avoid direct sunlight or strong light sources. Also, be careful not to drop the
camera or lens.
NOTES
After removing a lens/When a lens is not attached to the camera:
- Do not touch the lens’s surfaces, the lens mount or any components inside the lens mount area.
- Place the body cap back on the lens mount and the dust caps on the lens. Clean any dust or dirt from the
body cap and dust caps before using them.
Attaching an EF Lens
1Set the
Q
switch to OFF.
2 Remove the body cap from the camera and the dust caps
from the lens.
3 Attach the lens to the camera and turn the lens in the
direction of the arrow until it clicks in place.
EF lenses: Align the red mark on the lens with the red EF
Lens mount index mark on the camera.
EF-S lenses: Align the white mark on the lens with the
white EF-S Lens mount index mark on the camera.
Removing an EF Lens
1Set the
Q
switch to OFF.
2 Hold down the lens release button and turn the lens all the
way in the direction of the arrow until it stops.
3 Remove the lens and replace the body cap on the camera
and the dust caps on the lens.
RD-1 Rod
Clamp (optional)
Preparing the Camera
38
NOTES
Turning on the image stabilization function of an EF lens may reduce the effective usage time of the battery
pack. When image stabilization is not necessary, for example if the camera is fixed to a tripod, it is
recommended to turn it off.
Depending on the lens used, you may experience one or more of the following limitations.
- The lens model name may be shortened when displayed on the screen.
- You may not be able to focus manually when the focus mode switch is set to AF.
- You may not be able to use the focus preset function on super telephoto lenses.
- You may not be able to use the power zoom function on lenses with that function.
This camera’s sensor is larger than the sensor size for which EF-S lenses are designed (APS-C). When using
EF-S lenses with this camera, you may notice peripheral illumination fall-off or vignetting.
When using a compatible lens, you can use the > [
B
& System Setup] > [Retract Lens] setting
(A 194) to retract the lens automatically when the camera’s power is turned off.
Updating the Firmware of an EF Lens
You can update the lens firmware of the EF lens attached to the camera. For details about firmware updates for
EF lenses, visit your local Canon website.
1 Download the lens firmware update file from the Canon website and save it on an SD card. Insert the SD card
containing the lens firmware update into SD card slot B.
2 Attach the lens you wish to update to the camera and open the lens firmware submenu.
> [
B
& System Setup] > [Firmware] > [Lens]
The current lens firmware version will appear on the screen.
If the [Lens] option is grayed out, the attached lens may not support firmware updates, the SD card may be
in SD card slot A or the SD card used may not contain a valid lens firmware file. Check the lens and SD card
and repeat the procedure from the beginning.
3 Select [OK] and then press the joystick.
4 Select the lens firmware file (file extension .LFU) and then press the joystick.
5 Select [OK] and then press the joystick
The lens firmware will be updated. Once in progress, the lens firmware update cannot be canceled.
6 When the confirmation message appears, press the joystick.
IMPORTANT
Be sure to observe the following precautions while the lens firmware is being updated.
- Do not disconnect the power source or turn off the camera.
- Do not remove the lens.
- Do not operate any buttons or controls on the camera.
- Do not open the SD card slot cover and do not remove the SD card.
NOTES
The lens firmware cannot be updated while pre-recording is activated.
We recommend that you power the camera from a power outlet using the AC adapter or use a sufficiently
charged battery pack.
When using an optional EF Extender, remove the Extender before performing the procedure.
Operating modes:
39
Preparing the Camera
In-Camera Lens Correction
Depending on the characteristics of the lens used, the corners of an image frame may be darker than the center
due to light fall-off (peripheral illumination drop), or color shift/color fringing may be visible along high-contrast
edges in the image (chromatic aberration). If the camera has correction data available for the EF lens used, it can
apply this correction data to compensate as necessary.
1 Attach the lens you want to use.
2 Open the desired correction screen.
> [
v
& Camera Setup] > [Periph. Illum. Corr.] or [Chromatic Aberr. Corr.]
If correction data is not available, the corresponding menu option will appear grayed out. Visit your local
Canon website and check if there is correction data available for the lens you are using. If so, download the
necessary update package and upgrade the camera’s firmware following the instructions supplied therein.
3 Select [On] and then press the joystick
•As long as > [
v
& Camera Setup] > [Periph. Illum. Corr.] or [Chromatic Aberr. Corr.] is set to
[On], the camera will automatically apply the appropriate correction data.
Correction for EF-S Lenses
The peripheral illumination fall-off may be more pronounced with EF-S lenses than with EF lenses. To prevent
this, when you use an EF-S lens, you can change the image area that is used for producing the image.
1 Open the [EF-S Lens] submenu.
> [~
%
Camera Setup] > [EF-S Lens]
2 Select [On] and then press the joystick.
will appear at the lower center of the screen.
When [EF-S Lens] is set to [On], the image is enlarged digitally by a factor of approximately 1.04x, slightly
affecting the image quality. In most cases, using the default [Off] setting is recommended.
NOTES
About in-camera lens correction data: The camera contains a register of correction data for compatible lenses
that were available at the time the camera went on sale. Correction data for future lenses will be made
available as part of the regular updates released for the camera’s firmware. For more details, visit your local
Canon website.
No peripheral illumination/chromatic aberration correction will be applied in the following cases:
- When the appropriate correction data is not available for the lens attached.
- When using non-Canon lenses. Even if the corresponding menu setting is available (not grayed out), setting
it to [Off] is recommended.
When peripheral illumination correction is activated:
- Depending on the recording conditions, noise may appear in the periphery of the image as a result of the
correction.
- The level of correction will be lower for lenses that cannot provide distance information.
- The level of correction will be lower the higher the ISO speed/gain setting used.
- When using EF-S lenses, peripheral illumination fall-off may be more pronounced.
Operating modes:
Operating modes:
Preparing the Camera
40
Using the LCD Monitor
You can rotate and position the LCD monitor in a number of ways
to match your shooting style.
1 Rotate the LCD monitor mount 90° toward the lens.
Make sure LCD attachment unit alignment mark (on LCD
attachment unit pivot A) and – (on the LCD monitor mount)
are aligned.
2 Rotate LCD attachment unit pivot B 180° toward the
CFast card slot.
Make sure LCD attachment unit alignment mark (on LCD
attachment base 2) and – (on LCD attachment unit pivot B)
are aligned.
3 Adjust the LCD monitor to the desired position.
NOTES
Based on the LCD monitor’s position, you can invert the image displayed on the screen. Repeatedly pressing
the MIRROR button will change the displayed image in the following order: Image inverted horizontally
Image inverted vertically Image inverted horizontally and vertically Original image. When the image is
inverted only horizontally or vertically, the camera’s onscreen displays will be turned off.
You can use the > [
B
%
System Setup] > [Touch Screen Response] setting to adjust the LCD
monitor’s response to touch input.
k
Using the Viewfinder
The camera’s viewfinder features an OLED screen that turns on
automatically when you look through the viewfinder. The screen
also turns off automatically shortly after you stop using the
viewfinder.
Adjusting the Viewfinder
1 Adjust the angle as necessary.
2 Turn on the camera and adjust the dioptric adjustment lever until the viewfinder’s image is sharp.
NOTES
You can turn on the viewfinder permanently by setting > [
¢
" Monitoring Setup] > [VF Eye
Sensor] to [Off].
Attaching and Removing the Eye Cup
Attach the eye cup so that it covers the rubber rim of the
viewfinder unit. To remove the eye cup, pull it gently in a “peeling
off” motion from the bottom up.
For left eye use, attach the eye cup so that the protruding part
faces the opposite side.
k
You can use the viewfinder and watch the
LCD screen at the same time
Dioptric
adjustment lever
Eye cup
Viewfinder
unit
41
Preparing the Camera
IMPORTANT
Pointing the viewfinder lens at the sun or other strong light sources
may cause damage to internal components. When you are not using
the viewfinder, make sure to attach the viewfinder cap to the
viewfinder. This will also protect the viewfinder from scratches and
dirt. Attach the viewfinder cap by inserting it into the rubber rim of the
viewfinder unit.
Adjusting the LCD Screen or Viewfinder (
k
only)
You can adjust the brightness, contrast, color, sharpness, and luminance level of the LCD screen and viewfinder
independently of each other. These adjustments will not affect your recordings.
1 Open the setup menu for the LCD screen or viewfinder.
> [
¢
! Monitoring Setup] (for the LCD screen) or [
¢
" Monitoring Setup] (for the viewfinder)
2 Select the desired brightness, contrast, color, sharpness or luminance setting and then press the joystick.
When the viewfinder is turned off, the menu items will appear grayed out.
3 Select the desired level and then press the joystick.
Repeat steps 2 and 3 to adjust other settings as necessary.
Menu items by setting
NOTES
If you set an assignable button to [LCD LM-V1 Setup] or [Viewfinder Setup] (A 125), you can press the
button to open the [
¢
! Monitoring Setup] menu or [
¢
" Monitoring Setup] menu, respectively.
About the LCD and viewfinder screens: The screens are produced using extremely high-precision manufacturing
techniques, with more than 99.99% of the pixels operating to specification. Very rarely, pixels may misfire or
may light up permanently as white dots. This has no effect on the recorded image and does not constitute a
malfunction
Operating modes:
Setting
Menu item
LCD screen Viewfinder
Brightness [LCD LM-V1 Brightness] [VF Brightness]
Contrast [LCD LM-V1 Contrast] [VF Contrast]
Color [LCD LM-V1 Color] [VF Color]
Sharpness [LCD LM-V1 Sharpness] [VF Sharpness]
Luminance [LCD LM-V1 Luminance] [VF Luminance]
Preparing the Camera
42
Setting the Screen to Black & White
The viewfinder and LCD screen display in color by default but you can set them to black & white. Even when the
screen is black & white, onscreen text and icons will still be displayed in color.
1 Open the display selection menu for the viewfinder or LCD screen.
> [
¢
$ Monitoring Setup]
1
> [B&W Image: VF Output] (
k
only) or [B&W Image: VIDEO
Output]
1
l
Appears on the previous page in the menu.
2 Select [On] and then press the joystick.
Using a Tripod
The camera is shipped with the TB-1 Tripod Base. When mounting the camera on a tripod with 0.95 cm (3/8")
mounting screws, use the tripod socket for tripods with 0.95 cm (3/8") screws; for a tripod with 0.64 cm (1/4")
screws, use the tripod socket for tripods with 0.64 cm (1/4") screws.
IMPORTANT
Do not use tripods with mounting screws exceeding the depth of the screw holes on the camera as this may
damage the camera.
Operating modes:
Screw hole for 0.95 cm
(3/8") mounting screws
Tripod socket for tripods with
0.95 cm (3/8") screws
Tripod socket for tripods with
0.64 cm (1/4") screws
Screw holes for 0.64 cm (1/4")
mounting screws
43
Preparing the Camera
Removing and Attaching the GR-V1 Camera Grip
The camera grip comes originally attached to the C200; it is an optional accessory for the C200B. You can
remove it and replace it with the thumb rest should the minimal configuration be necessary.
Removing the Camera Grip
1Set the
Q
switch to OFF.
2 Unscrew the camera grip’s lock screw and gently detach
the camera grip.
The camera grip contains an internal connection cable
so be sure not to pull it too forcefully.
3 Remove the grip attachment ring and disconnect the
camera grip’s connection plug.
You can attach the grip attachment ring to the
connection cable so that you do not lose it.
4 Screw the thumb rest onto the camera.
Attaching the Camera Grip
The camera grip can be attached in a number of positions
from 90° toward the lens to 60° toward the viewfinder at 6°
intervals.
1Set the
Q
switch to OFF.
2 Unscrew the thumb rest and remove it from the camera.
3 Lay the camera on a flat, stable surface with the rosette
facing up.
4 Firmly insert the camera grip’s plug all the way into the
camera grip connection terminal on the camera.
Make sure to insert the plug all the way in, until the
terminal is not visible.
If the plug is not correctly connected, all the controls
on the camera may be disabled.
5 Attach the grip attachment ring.
6 Return the camera to an upright position, with the top
side facing upward.
7 Attach the camera grip to the camera aligning it at the
desired angle and tighten the camera grip’s lock screw.
60° 90°
Preparing the Camera
44
Adjusting the Grip Belt
Adjust the grip belt so that you can reach the REC
button on the camera grip with your index finger but
still have a comfortable but secure grip.
Attaching the Microphone Holder
1 Attach the microphone holder to the LCD
attachment unit.
You can also attach the microphone holder to the
camera directly.
2 Use a commercially available Phillips head
(“crosshead”) screwdriver to secure it firmly with the
supplied M4 bolts.
Attaching the Shoulder Strap
The SS-1200 Shoulder Strap is supplied with
the C200 while it is an optional accessory for
the C200B.
Pass the ends through the strap mount
and adjust the length of the strap.
45
Preparing the Camera
Removing and Attaching the Terminal Covers
You can remove the covers of the camera’s terminals to access them more easily.
Removing the Terminal Covers
Open the terminal cover and gently pull it straight out.
Attaching the Terminal Covers
Insert the connecting strip into the opening to attach the terminal cover.
NOTES
If the connecting strip is difficult to grasp, use a pair of tweezers or similar tool.
Preparing the Camera
46
Using the Optional EVF-V70 Electronic Viewfinder
You can attach the optional EVF-V70 OLED Electronic Viewfinder (1920x1080 pixels) to the camera instead of
the LCD monitor and use the buttons and dials on the EVF-V70 to operate the camera. Attaching the EVF-V70
also requires attaching the handle unit
1
and optional CL-V2 Clamp Base. The assistance functions that can be
output to the LCD monitor through the VIDEO terminal will also be output to the EVF-V70.
1
Supplied accessory for the C200; optional accessory for the C200B.
1 Attach the handle unit (A 28).
2 Set the
Q
switch to OFF.
3 Perform the steps up to, but not including, attaching the
clamp base to the camera described in the EVF-V70’s
instruction manual (steps 1 to 4 of Attaching the
Viewfinder).
4 Attach the optional CL-V2 Clamp Base to the handle
unit.
Use a hex wrench* to secure it firmly with the hex socket
head bolts*.
* Supplied with the clamp base.
5 Attach the EVF-V70.
Perform the steps after attaching the clamp base to the
camera described in the EVF-V70’s instruction manual
(steps 6 to 11 of
Attaching the Viewfinder
).
47
Preparing Recording Media
Preparing Recording Media
The camera records clips
1
on CFast or SD cards
2
and photos on SD cards. The camera features two SD card
slots. When you insert two SD cards in the camera, the camera can record 4K clips simultaneously on both
cards, or it can switch automatically to recording on the other SD card when an SD card becomes full.
Initialize recording media (A 50) when you use them with this camera for the first time.
1
Clips that are, in general, intended to be a deliverable are referred to as “primary clips” while clips that are intended to be edited
offline are referred to as “proxy clips”. Primary clips are recorded to the CFast card (for RAW clips) or SD card (for MP4 or XF-AVC
clips); proxy clips can be in MP4 or XF-AVC format and are recorded only to the SD card.
2
The SD card is used also to save custom picture files and menu settings files.
Compatible Recording Media
The following types of memory card can be used with this camera. For the latest information about recording
media tested for use with this camera, visit your local Canon website.
CFast cards
CFast 2.0-compliant cards.
SD cards
1
1
As of February 2018, the clip recording function has been tested using SD cards made by Panasonic, Toshiba and SanDisk.
2
UHS and SD Speed Class are standards that indicate the minimum guaranteed data transfer rate of SD cards.
3
To record XF-AVC clips, we recommend using SD cards rated Speed Class 10, or UHS Speed Class 1 or 3. To record 4K clips
(3840x2160) or clips using slow motion recording mode, we recommend using SD cards rated UHS Speed Class 3.
IMPORTANT
CFast cards can become hot due to the high operating temperature inside the camera. Removing a CFast
card immediately after using it for recording may cause burns or cause you to drop the CFast card, resulting in
damage to the card.
About CFast and SDXC cards: You can use CFast and SDXC cards with this camera but these types of cards are
initialized by the camera using the exFAT file system.
- When using exFAT-formatted cards with other devices (digital recorders, card readers, etc.), make sure that
the external device is compatible with exFAT. For more information on compatibility, contact the computer,
operating system or memory card manufacturer.
- If you use exFAT-formatted cards with a computer OS that is not exFAT-compatible, you may be prompted
to format the card. In such case, cancel the operation to prevent data loss.
After repeatedly recording, deleting and editing clips (if the memory is fragmented), you may notice slower
writing speeds to the recording media and recording may even stop. In such case, save your recordings and
initialize the recording media with the camera. Be sure to initialize recording media especially before shooting
important scenes.
NOTES
Proper operation cannot be guaranteed for all recording media.
SD card type:
SD cards SDHC cards SDXC cards
UHS Speed Class
2, 3
:
SD Speed Class
2, 3
:
Preparing Recording Media
48
Inserting a CFast Card
1 Slide the CFast card slot cover switch in the direction of
the arrow.
The CFast card slot cover will open.
2 Insert the CFast card straight, with the label facing the SD
card slots, all the way into the slot.
3 Close the CFast card slot cover.
Do not force the cover closed if the CFast card is not
correctly inserted.
CFast card access indicator
If you set > [
B
%
System Setup] > [LED] > [CFast
Access LED] to [Off], the CFast card access indicator will not
illuminate.
Removing a CFast card
1 Wait until the CFast card access indicator is off or is
illuminated in green.
2 Slide the CFast card slot cover switch in the direction of the
arrow.
The CFast card slot cover will open.
3 Make sure the CFast card access indicator is off and then
push the CFast card release button.
4 Pull out the CFast card and close the CFast card slot cover.
IMPORTANT
Observe the following precautions while the CFast card access indicator is illuminated in red. Failure to do so
may result in permanent data loss.
- Do not disconnect the power source or turn off the camera.
- Do not remove the CFast card.
CFast indicator CFast card status
Red Accessing the CFast card.
Green Recording/playback is possible.
Off A CFast card is not inserted.
CFast indicator
49
Preparing Recording Media
Inserting and Removing an SD Card
You can insert an SD card into SD card slot A or slot B. If you
have two SD cards, you can use both slots.
1 Open the SD card slot cover.
2 Insert the SD card, with the label facing the right side
of the camera (the side with the air intake vent), all the
way into the SD card slot until it clicks.
To remove the SD card, make sure the SD access
indicator is off and then push the SD card once to release
it. When the SD card springs out, pull it all the way out.
3 Close the SD card slot cover.
Do not force the cover closed if the SD card is not
correctly inserted.
SD card access indicators
If you set > [
B
%
System Setup] > [LED] > [SD Card Access LED] to [Off], the SD card access
indicators will not illuminate.
IMPORTANT
Observe the following precautions while an SD card access indicator is illuminated in red. Failure to do so may
result in permanent data loss.
- Do not disconnect the power source or turn off the camera.
- Do not remove the SD card.
SD cards have front and back sides that are not interchangeable. Inserting an SD card facing the wrong
direction can cause a malfunction of the camera. Be sure to insert the SD card as described in step 3.
NOTES
SD cards have a physical switch to prevent writing on the card so as to avoid the accidental erasure of the
card’s content. To write-protect the SD card, set the switch to the LOCK position.
SD CARD 2/ SD CARD 3
indicator
SD card status
Red Accessing the SD card.
Green
SD card is ready for recording, or playback of clips and
photos is possible.
Off
An SD card is not inserted, the SD card is not being
accessed, the SD card is write-protected with the LOCK
switch, or the SD card slot is not currently selected.
SD card access
indicator
Preparing Recording Media
50
Initializing Recording Media
The first time you use a recording media with this camera, initialize it first. You can also initialize a recording media to
permanently delete all the data it contains.
1 Open the [Initialize Media] submenu.
> [Æ
!
Recording/Media Setup] > [Initialize Media]
2 Select [CFast], [SD Card A] or [SD Card B] and then press the joystick.
3 Select [OK] and then press the joystick.
4 When the confirmation message appears, press the joystick.
The recording media is initialized and all the data it contains is erased.
IMPORTANT
Initializing a recording media will permanently erase all data, including photos and protected custom picture
files. Lost data cannot be recovered. Make sure you save important recordings in advance.
Depending on the SD card, initialization may take up to a few minutes.
NOTES
While recording on an SD card, you can initialize another SD card in the other SD card slot.
If you set an assignable button to [Initialize Media] (A 125), you can press the button to open the initialization
submenu.
Switching Between the SD Card Slots
The camera features two SD card slots, SD card slot A and SD
card slot B. If both slots contain an SD card, you can switch
between them as necessary.
Press the SLOT SELECT button.
The access indicator of the selected SD card slot will illuminate in
green. On the screen, the SD card selected is indicated with a
Ð
mark next to SD card icon.
NOTES
If both SD card slots contain an SD card and you open the cover of the selected slot, the camera will
automatically switch to the other slot.
You cannot use the SLOT SELECT button to switch between SD card slots while recording.
You can also perform this function remotely using Browser Remote on a connected network device (
A
170
).
Operating modes:
Operating modes:
51
Preparing Recording Media
Relay Recording and Double Slot Recording
The camera features two convenient recording methods that can be used when both SD card slots contain an
SD card: relay recording and double slot recording.
Relay recording: This function allows you to continue recording on another SD card without interruption if the SD
card you are using becomes full. Relay recording is available from SD card slot A to SD card slot B, and vice
versa.
Double slot recording: This function records the same clip simultaneously to both SD cards, which is a
convenient way to make a backup copy of your recording while you record.
To use relay recording
1 Open the [Relay Recording] submenu.
> [Æ
#
Recording/Media Setup] > [Relay Recording]
2 Select [On] and then press the joystick.
To use double slot recording
1 Open the [Double Slot Recording] submenu.
> [Æ
#
Recording/Media Setup] > [Double Slot Recording]
2 Select [On] and then press the joystick.
4
appears at the top of the screen.
NOTES
Relay recording (the switch to the other SD card) will not be performed during slow motion recording even if
the recording media becomes full.
If an SD card becomes full during double slot recording, recording on both cards will stop. On the other hand,
if an error occurs with one of the SD cards, recording will continue on the other card.
Double slot recording cannot be used together with relay recording, slow motion recording or continuous
recording.
Checking the Remaining Recording Time on Recording Media
In mode, the display on the upper left of the screen shows the recording media icons and the remaining
recording time
1
(in minutes) on each card (A 58).
On the [Media] status screen (A 200), you can check the total space, and used space on each recording
media. For SD cards only, the remaining recording time, remaining number of photos and speed class are
displayed as well.
1
Remaining recording times are approximate and calculated based on the current video configuration used.
Operating modes:
Preparing Recording Media
52
Recovering Clips
Some actions, such as suddenly turning off the camera or removing the recording media while data is being
recorded, can cause data errors in the recorded clip.
1 Open the index screen with the clip you wish to recover (A 139).
2 Select the desired clip (a clip with the icon instead of a thumbnail image) and then press the
joystick.
3 Select [Recover Clip] and then press the joystick.
4 Select [OK] and then press the joystick.
The camera will attempt to recover the corrupted data.
5 When the confirmation message appears, press the joystick.
NOTES
In the RAW clip or MP4 clip index screen, recovered clips appear with a
Ð
icon instead of the usual
thumbnail.
This procedure may delete clips shorter than 0.5 seconds in length.
In some cases, it may not be possible to recover the data. This is more likely when the file system is corrupted
or the recording media is physically damaged.
Only clips recorded with this camera can be recovered. Photos cannot be recovered.
Operating modes:
53
Adjusting the Black Balance
Adjusting the Black Balance
You can have the camera adjust the black balance automatically when ambient temperature changes
considerably or if there is a noticeable change in a true black video signal.
1 Attach the body cap to the lens mount.
If a lens was attached, turn off the camera and remove the lens. Place the body cap back on the lens mount
and turn on the camera.
2 Open the [ABB] screen.
> [v
&
Camera Setup] > [ABB]
3 Select [OK] and then press the joystick.
The automatic black balance procedure will start. It will take approximately 40 seconds, depending on the
frame rate.
4 When the confirmation message appears, press the joystick.
If the sensor is not completely shielded from light, [Error] will appear on the screen. Press the joystick and
repeat the procedure from the beginning.
NOTES
Adjusting the black balance is necessary in the following cases:
- When using the camera for the very first time or after a long period of not using it.
- After sudden or extreme changes in ambient temperature.
- After changing the ISO speed/gain settings.
- After resetting the camera’s settings or all the settings.
- After activating or deactivating slow motion recording mode (including switching to another special
recording mode).
During the adjustment of the black balance, you may notice some irregular displays appear on the screen. This
is not a malfunction.
Operating modes:
Adjusting the Black Balance
54
3
55
Recording
Recording Video
This section explains the basics of recording clips*. For details on recording audio, refer to
Recording Audio
(A 96).
Before making important recordings for the first time, make test recordings using the video configuration(s) you
plan to use to check that the camera operates correctly. Should the camera fail to operate correctly, refer to
Troubleshooting
(A 206).
* “Clip” refers to a single movie unit recorded with a single recording operation. You can also include metadata with the clip.
Preparing to Record
1 Attach the LCD monitor, handle unit, camera grip, etc. as necessary to build the desired
configuration (
A 36).
2 Attach a charged battery pack to the camera (
A 25).
3 Insert recording media (CFast card, one or two SD cards) as necessary (
A 48, 49).
Insert SD cards into both SD card slots to use relay recording, double slot recording (A 51) or continuous
recording (A 118).
Insert an SD card into SD card slot B to record photos.
To use an external recorder (A 152), complete the necessary connections and settings.
4 Attach a lens (A 37).
5 Adjust the viewfinder (
k
only) and/or LCD screen.
Operating modes:
Recording Video
56
Recording
1 Set the
Q
switch to CAMERA.
The camera turns on in mode and enters record standby mode.
The access indicators of card slots with a card inserted will illuminate momentarily in red. Then, the access
indicator of the recording media slot selected for recording will change to green.
2 Press the REC button to begin recording.
Recording starts. The tally lamps illuminate and the recording indicator [
Ü
REC] appears at the top of the
screen.
You can use the REC button on the camera’s body (left side) or camera grip.
You can also perform this function remotely using Browser Remote on a connected network device (
A
170).
For details about recording proxy clips, refer to
Simultaneous Recording of Proxy Clips
(A 113).
3 Press the REC button to stop recording.
The clip is recorded and the camera enters record standby mode. The tally lamp will also go out.
IMPORTANT
Observe the following precautions while an access indicator is illuminated in red. Failure to do so may result in
permanent data loss.
- Do not open the card slot cover of the card being accessed and do not remove the card.
- Do not disconnect the power source or turn off the camera.
Be sure to save your recordings regularly (A 158), especially after making important recordings. Canon shall
not be liable for any loss or corruption of data.
NOTES
NOTES
You can use the review function (A 112) to play back part or all of the last clip recorded without having to
switch to mode.
If you record using metadata settings, those settings will be recorded with the clip. For more details, refer to
Setting the Clip File Name
(A 61).
If the camera switches to the other SD card while recording video due to the relay recording function (A 51),
the two parts (before/after the switch) will be recorded as separate clips.
A single MP4 or XF-AVC clip can be recorded continuously for up to 6 hours. At that point, a new clip will be
created automatically and recording will continue on a separate clip.
SD card access indicators
Tal l y l a m p
CFast card access
indicator
Tal l y l am p
57
Recording Video
Onscreen Displays
Refer to this section for an explanation of the various screen displays that appear in mode. You can use
the custom display function (A 190) to turn off individual onscreen displays if they are not required. The menu
item that controls each display is given in the following table (1: indicates a menu item under [Custom Display 1]
and 2: indicates a menu item under [Custom Display 2]).
AF frames
Depending on the focus function used you may see some of the following AF frames.
Locking the Controls in Recording Mode
Once in mode, you can set the
Q
switch to
C
(key lock) to lock all the physical controls (buttons and switches)
on the camera, save for the REC button*. This is useful in
preventing settings from being changed due to inadvertently
pressing one of the buttons. Return the
Q
switch to the
CAMERA position to reactivate the controls.
* You can choose to lock the REC button on the camera body or the camera
grip with the > [
B
$ System Setup] > [Camera REC Button]
and [Camera Grip REC Button] settings. In either case, you can still operate
the camera using the Browser Remote application (A 170).
Continuous AF frame – always in white (A 85)
AF-Boosted MF frame – in yellow: manual adjustment range; in white: automatic adjustment range (A 84)
One-shot AF frame (A 84)
Face AF: Main subject (A 87)
Face AF:
Other face detection frames
Tracking: Subject selection (A 88)
Tracking: During tracking Focus frame with focus guide (A 82)
Recording Video
58
Left side of the screen
Icon/Display Description Custom Display
Recording media status, estimated remaining recording time and recording format 2: [Remaining Rec Time]
;, 0000 min, END CFast card status: in green - can record (RAW clips); in white - reading the CFast
card; in yellow - remaining recording time is 5 minutes or less; in red - remaining
recording time is less than 1 minute; in red with [END] - the CFast card is full.
(in red) No CFast card or cannot record on the CFast card.
6, 7, 0000 min, END SD card status: in green - can record (MP4 or XF-AVC clips); in white - reading the
SD card; in yellow - remaining recording time is 5 minutes or less; in red -
remaining recording time is less than 1 minute; in red with [END] - the SD card is
full. The SD card selected for recording is indicated with a
Ð
mark.
, (in red) No SD card or cannot record on the SD card.
r, ¸, Recording format (A 64)
0000 mm Approximate focal length of the lens 1: [Focal Length]
, Focus mode (A 80) 1: [Focus Mode]
, Face AF (A 87)
, , , ,
, ,
Custom picture gamma settings (A 129)
HDR output (A 154)
1: [Custom Picture/HDR]
Detailed picture settings of the custom picture file are active (A 134). 1: [Custom Picture/HDR]
, Light metering mode (A 76) 1: [Light Metering]
A viewing LUT has been applied to at least one display or output terminal (A 155)
The icon will appear on all active display devices regardless of which screen/
output terminal the LUT was applied to.
1: [LUT]
^ (in yellow) Magnification (A 83) 1: [Magnification]
J (in yellow),
K (in yellow)
Peaking (A 83) 1: [Peaking]
Q User memo (A 109) 2: [User Memo]
GPS signal (A 111): continuously on - satellite signal acquired; flashing -
satellite signal not acquired.
Displayed only when an optional GP-E2 GPS Receiver is connected to the
camera.
2: [GPS]
59
Recording Video
Top of the screen
Right side of the screen
Icon/Display Description Custom Display
Network functions: 2: [Network Functions]
, ,
Network connection status:
in white - function ready to be used; in yellow - connecting to or disconnecting
from a network; in red - error has occurred.
4
Double slot recording (A 51) 2: [Recording Mode]
Recording operation: 2: [Recording Mode]
STBY,
Ü
REC Clip recording: record standby, recording.
INT STBY,
Ü
INT,
Ü
INT REC
Interval recording (A 117): record standby (before the sequence has started),
record standby (once the sequence has started), recording.
In record standby mode before the interval recording sequence has started,
[INT] flashes.
FRM STBY,
Ü
FRM STBY,
Ü
FRM REC
Frame recording (A 116): record standby (before the sequence has started),
record standby (once the sequence has started), recording.
In record standby mode before the frame recording sequence has started,
[FRM] flashes.
SLOW STBY,
Ü
SLOW REC
Slow motion recording (A 114): record standby, recording.
PRE REC STBY,
Ü
PRE REC
Pre-recording (A 115): record standby, recording.
STBY
`
6
CONT STBY
`
7
,
Ü
REC
`
6
Ü
CONT REC
`
7
Continuous recording (A 118): both cards in record standby, both cards
recording.
The upper row (
'6
) indicates the status of the normal (non-continuous) clips
on SD card A. The row below it (
'7
) indicates the status of the continuous
recording on SD card B.
1s - 10m00s Interval recording counter (A 117) 2: [Interval Counter]
00.00P Frame rate (A 64)
During slow motion recording, the shooting frame rate is also displayed
(000/00.00P).
2: [Frame Rate]
REC
`
, STBY
`
Output recording command (A 153) 2: [Rec Command]
00:00:00.00, 00:00:00:00
R, P, F, H
Time code (A 92)
Time code status (A 94)
2: [Time Code]
Icon/Display Description Custom Display
7 0000 Approximate number of photos that can be recorded on the SD card (A 120) 2: [Remaining Photos]
(in red) No SD card or cannot record photos on the SD card.
00 bit, YCC420 8 bit Color depth, color sampling (A 65) 2: [Resolution/
Color Sampling]
0000x0000 Resolution (A 65) 2: [Resolution/
Color Sampling]
SDI terminal not active (A 152) 2: [Output Terminals
Status]
T
(in red) Output onscreen displays (A 156) 2: [OSD Output]
Audio peak limiter (A 101) 2: [Audio Level Indicator]
Audio level meter (A 101)
Recording Video
60
Bottom/Bottom-Center of the screen
NOTES
NOTES
You can repeatedly press the DISP button to switch the onscreen displays in the following sequence.
Show all onscreen displays show onscreen markers
1
hide all onscreen displays
2
.
1
Only when a marker in > [
A
& Assistance Functions] is activated. The various frames used for focus-related
functions are displayed as well.
2
Except for the recording operation.
Date/time 2: [Date/Time]
CH0/CH0 Audio output channels (A 157) 2: [Monitor Channels]
è
é
ê
ë
(in red)
000 min
Remaining battery charge
The icon shows an estimate of the remaining charge. The remaining recording time is
displayed, in minutes, next to the icon.
When is displayed, replace the battery pack with a fully charged one.
Depending on the conditions of use, the actual battery charge may not be indicated
accurately.
2: [Remaining Battery]
Icon/Display Description Custom Display
00 00 00 00 User bit (A 95) 2: [User Bit]
A001C001 to Z999D999 Clip identification. Includes the camera index, reel number and clip number
components of the clip file name (A 61).
2: [Reel/Clip Number]
b
Temperature warning (A 63) 2: [Temperature/Fan]
`
Fan operation (A 63) 2: [Temperature/Fan]
`
(in red) Fan warning (A 208) 2: [Temperature/Fan]
i
(in red) Lens error warning (A 208) 1: [Lens]
b
,
c
,
d
Digital tele-converter (A 89) 1: [Tele-converter]
j
EF-S lens correction (A 39) 1: [EF-S Lens]
C
Key lock (A 57) 1: [Key Lock]
Å
A/
Å
,
¼
,
É
,
È
, ,
0000 K ±0CC
White balance (A 77) 1: [White Balance]
Headphone volume (A 143)
Exposure bar (A 75)
Only displayed when the gain, iris and shutter are all set to manual adjustment.
1: [Exposure Bar]
AE ±0.00 AE Shift (A 75) 1: [AE Shift]
ND 00 stops ND filter (A 71) 1: [ND Filter]
E
, 0.0, closed Aperture value (A 72) 1: [Iris]
ISO 000000, 00.0dB ISO speed/Gain (A 69) 1: [ISO/Gain]
1/0000,
000.00Hz,
000.00°
Shutter speed (A 67) 1: [Shutter]
Icon/Display Description Custom Display
61
Recording Video
Setting the Clip File Name
The camera allows you to change several settings that determine the clip file name of recorded RAW and XF-AVC
clips. Personalize the clip file name according to your preferences or organizational conventions to create files that
are easier to identify and organize.
The basic file name structure for RAW and XF-AVC clips is as follows. When recording a proxy clip with a RAW
clip, the proxy clip’s file name depends on the proxy clips format. For XF-AVC proxy clips, the file names of the
primary and proxy clips will be almost identical (components 1 to 6). For MP4 proxy clips, the file names will
differ, as the proxy clip will follow the naming convention for MP4 files (A 62).
Setting the components of the clip file name
To set the camera ID
1 Open the [Camera Index] screen.
> [
Æ
$ Recording/Media Setup] > [Metadata] > [Camera Index]
2 Push the joystick up/down to select the desired camera ID and then press the joystick twice.
To set the clip numbering method
1 Open the [Clip Numbering] screen.
> [
Æ
$ Recording/Media Setup] > [Metadata] > [Clip Numbering]
2 Select [Reset] or [Continuous] and then press the joystick.
Options
[Reset]: The clip number will restart from 001 every time you insert a new card.
[Continuous]: Clip numbers will start from the initial number set with [Clip Number] (following procedure) and
continue across multiple cards.
Operating modes:
A001C001_yymmddXX_CANON_01P
1 2 3 4 675
1 Camera index: One character (A to Z) that
identifies the camera used.
2 Reel number: 3 characters (001 to 999) that
identify the recording media used. The number is
assigned automatically but you can set the initial
number.
After you insert a new card (just purchased or
initialized), the number advances by one when the
first recording is made.
3 Clip number: 4 characters (C001 to D999). The
clip number advances automatically with each
clip recorded (switching to D001 after C999), but
you can set the initial clip number and select the
clip numbering method.
4 Recording date (set automatically by the camera).
5 Random component: 2 characters (numbers 0 to
9 and capital letters A to Z) that change randomly
with each clip.
6 User defined field: 5 characters (numbers 0 to 9
and capital letters A to Z) for any other
identification purposes.
7 The camera will automatically add the suffix “_P”
to the file name of XF-AVC proxy clips.
Additionally, when an SD/SDHC card is used to
record XF-AVC proxy clips, a stream number (01
to 99) will be added before the “P”. The stream
number will advance every time the video (stream)
file within the clip is split and recording continues
on a separate stream file.
Recording Video
62
To set the reel number or initial clip number
The initial clip number can only be set when [Clip Numbering] is set to [Continuous].
1 Open the [Reel Number] or [Clip Number] screen.
> [
Æ
$ Recording/Media Setup] > [Metadata] > [Reel Number] or [Clip Number]
2 Select [Change] and then press the joystick.
To reset the reel/clip number to [001], select [Reset] instead.
3 Push the joystick up/down to select the first digit of the reel/clip number and then press the joystick to move to
the next.
Change the rest of the digits in the same way.
4 Select [Set] and then press the joystick.
To set the user-defined field
1 Open the [User Defined] screen.
> [
Æ
$ Recording/Media Setup] > [Metadata] > [User Defined]
2 Select [Change] and then press the joystick.
Select [Reset] and then press the joystick to reset the user-defined field to [CANON].
3 Push the joystick up/down to select the first character and then press the joystick to move to the next.
Change the rest of the characters in the same way.
Selecting the File Numbering Method for MP4 Clips and Photos
MP4 clips and photos are automatically assigned consecutive numbers and stored on the SD card in folders.
You can select the numbering method used for MP4 clips and photos.
1 Open the [MP4 Clip/Photo Numbering] submenu.
> [
Æ
$ Recording/Media Setup] > [MP4 Clip/Photo Numbering]
2 Select the desired option and then press the joystick.
Options
[Reset]: MP4 clip/photo numbers will restart from 100-0001 every time you insert a new SD card. If an
SD card already contains previous recordings, numbers will continue from the number following
that of the last MP4 clip or photo on the SD card.
[Continuous]: MP4 clip/photo numbers will continue from the number following that of the last MP4 clip or
photo recorded with the camera. This setting is the most convenient for managing files on a
computer. We recommend using the [Continuous] setting.
Operating modes:
Understanding folder names
An example folder name is "101_1025". The first 3 digits indicate the folder number (from 100 to 999) and
the last 4 digits indicate the month and day when the folder was created. In the example, the folder
numbered 101 was created on October 25.
Understanding MP4 clip/photo numbers
An example number is "101-0107". The first 3 digits indicate the folder number the recording is stored in
and the last 4 digits indicate the consecutive number assigned to the recording (from 0001 to 9999).
The recording’s number also indicates the name and location of the file on the SD card. For example, an
MP4 clip/photo numbered 101-0107 that was recorded on October 25, is located in the “DCIM\101_1025”
folder as the file “MVI_0107.MP4” (for an MP4 clip) or “IMG_0107.JPG” (for a photo).
63
Recording Video
NOTES
NOTES
Each folder can contain up to 500 recordings. When that number is exceeded, a new folder is created
automatically.
Using the Fan
The camera uses an internal cooling fan to reduce the camera’s internal heat. In mode, you can change
the fan’s operation mode and speed. In mode, the fan runs at all times but you can select its speed.
Setting the Fan’s Operation in Mode
1 Open the fan’s [Mode] submenu.
> [
B
% System Setup] > [Fan] > [Mode]
2 Select the desired option and then press the joystick
If you selected [Automatic], the rest of the procedure is not necessary. If you selected [Always On], continue
the procedure to set the fan speed.
3 Open the [Fan Speed (Always)] submenu.
> [
B
% System Setup] > [Fan] > [Fan Speed (Always)]
4 Select the desired fan speed and then press the joystick.
Options
[Automatic]: The fan runs while the camera is not recording and is automatically turned off while the camera
is recording. However, if the internal temperature of the camera is too high (
b
appears in red),
the fan will be activated automatically (in that case,
`
will appear next to the
b
icon). When
the camera’s temperature has decreased sufficiently, the fan will be turned off. Use this setting
when you do not want the camera to pick up the fan’s operating sound.
[Always On]: The fan runs at all times.
Setting the Fan Speed in Mode
1 Open the [Fan Speed] submenu.
> [
B
$ System Setup] > [Fan Speed]
2 Select the desired fan speed and then press the joystick.
IMPORTANT
While the fan is running, the exhaust vent will emit warm air.
Be careful not to obstruct in any way the fan’s air vents (A 12, 13).
NOTES
NOTES
Depending on the ambient temperature and other shooting conditions, the fan may not turn off even if you set
its operating mode to [Automatic].
Operating modes:
Operating modes:
Video Configuration: Video Format, System Frequency, Frame Rate and Resolution
64
Video Configuration: Video Format, System Frequency, Frame Rate
and Resolution
With the following procedures you can set the video configuration used for main recording clips. Select the video
format, system frequency, frame rate, resolution (frame size) and color sampling settings that best match your
creative needs. Available options for some settings may change depending on previous selections for other
settings. See the tables following the procedures for a summary.
For details about the video configuration of proxy clips, refer to
Simultaneous Recording of Proxy Clips
(A 113).
Selecting the Main Recording Format
The camera can record clips in RAW
1
, MP4 or XF-AVC. RAW clips are recorded to the CFast card while MP4
and XF-AVC clips are recorded to an SD card. RAW clips require post-processing but give you high-quality and
a great amount of control in how the final picture turns out. XF-AVC clips deliver high-quality video due to efficient
compression. MP4 clips have a smaller file size and are very versatile.
1
Please note that the Cinema RAW Light data recorded by this camera is different from the Cinema RAW data recorded by other
Cinema EOS cameras.
1 Open the [Main Rec Format] submenu.
> [
Æ
! Recording/Media Setup] > [Main Rec Format]
2 Select [RAW (CFast)], [MP4 (SD Card)] or [XF-AVC (SD Card)] and then press the joystick.
Selecting the System Frequency
1 Open the [System Frequency] submenu.
> [
Æ
! Recording/Media Setup] > [System Frequency]
2 Select the desired option and then press the joystick.
The camera will reset and restart in the selected mode.
Selecting the Frame Rate
When shooting RAW clips, the frame rate will also determine the color depth. Refer to the following table.
This procedure is not necessary when the system frequency is set to [24.00 Hz].
1 Open the [Frame Rate] submenu.
> [
Æ
" Recording/Media Setup] > [Frame Rate]
2 Select the desired option and then press the joystick.
The selected frame rate will appear on the top of the screen.
Operating modes:
Operating modes:
Operating modes:
65
Video Configuration: Video Format, System Frequency, Frame Rate and Resolution
Selecting the Resolution and Color Sampling Settings
* For RAW clips, the resolution is set to 4096x2160 and cannot be changed.
1 Open the [Resolution/Color Sampling] submenu.
> [
Æ
" Recording/Media Setup] > [Resolution/Color Sampling]
2 Select the desired option and then press the joystick.
By default, the resolution/color sampling used does not appear on the screen but you can choose to display
it with the custom display function (A 59).
Available video configuration settings (RAW clips)
Available video configuration settings (MP4 clips)
Available video configuration settings (XF-AVC clips)
1
The camera uses a variable bit rate (VBR).
2
Long GOP options compress the image after analyzing also changes across a group of pictures and offer better compression
(smaller data size).
NOTES
NOTES
For details on the signal output from each terminal, refer to
Video Output Configuration
(A 149).
Operating modes:
Resolution Color depth Bit rate
1
System frequency/Frame rate
59.94 Hz 50.00 Hz 24.00 Hz
59.94P 29.97P 23.98P 50.00P 25.00P 24.00P
4096x2160
10 bit
1 Gbps
Ü Ü
12 bit Ü Ü Ü Ü
Resolution and color sampling
Bit rate and
compression
1, 2
System frequency/Frame rate
59.94 Hz 50.00 Hz 24.00 Hz
59.94P 29.97P 23.98P 50.00P 25.00P 24.00P
3840x2160
YCbCr 4:2:0,
8 bit
150 Mbps,
Long GOP
Ü Ü Ü Ü Ü Ü
1920x1080
YCbCr 4:2:0,
8 bit
35 Mbps,
Long GOP
Ü Ü Ü Ü Ü Ü
Resolution and color sampling
Bit rate and
compression
1, 2
System frequency/Frame rate
59.94 Hz 50.00 Hz
24.00 Hz
59.94i 59.94P 29.97P 23.98P 50.00P 50.00i 25.00P 24.00P
3840x2160
YCbCr 4:2:0,
8 bit
160 Mbps,
Long GOP
Ü Ü Ü Ü Ü Ü
1920x1080
YCbCr 4:2:0,
8 bit
45 Mbps,
Long GOP
Ü Ü Ü Ü Ü Ü Ü Ü
*
Changing Main Camera Functions with the FUNC Button
66
Changing Main Camera Functions with the FUNC Button
You can adjust three main camera functions—shutter speed, white balance and ISO speed/gain—using the
FUNC button (direct setting mode).
This section will explain the basic operation of the direct setting mode. For specific details about the functions
refer to the each function’s section: shutter speed (A 67), white balance (A 77), ISO speed/gain (A 69).
Using the Direct Setting Mode
1 Press the FUNC button.
The onscreen display of the function to be
adjusted will be highlighted in orange.
Press the FUNC button repeatedly or push the
joystick left/right to select the function you wish
to adjust.
2 Push the joystick up/down to select the
desired value (ISO speed, gain, shutter speed)
or desired white balance mode and then press
the joystick.
The selected value will be set and the camera
will exit the direct setting mode.
The onscreen display of the selected function will return to normal.
Depending on the function selected, additional adjustment may be possible or necessary before pressing
the joystick.
NOTES
NOTES
The camera will automatically end the direct setting mode in the following cases.
- If no operation was performed for more than 6 seconds.
- If the menu or a status screen was opened.
Operating modes:
67
Shutter Speed
Shutter Speed
Set the shutter speed based on the recording conditions. For example, you may want to set slower shutter
speeds in darker environments. The camera offers the following modes.
You can also perform this function remotely using Browser Remote on a connected network device (A 170).
[Speed]: Allows you to set the shutter speed (in fractions of a second). You can select the increment to use when
adjusting the shutter speed between 1/3-stop and 1/4-stop increments.
[Angle]: You can set the shutter angle to determine the shutter speed.
[Clear Scan]: Set the frequency in order to record CRT computer monitors without displaying black bands or
flicker on the screen.
[Slow]: You can set slower shutter speeds to obtain brighter recordings in places with insufficient lighting. This
mode is not available during slow motion recording.
[Off]: The camera uses a standard shutter speed based on the frame rate.
Available Shutter Speeds
The available shutter speeds vary depending on the system frequency and frame rate used.
1
59.94i and 50.00i are available only for XF-AVC clips.
2
During slow motion recording, available values will vary depending on the selected shooting frame rate.
3
The available shutter speeds will depend on the selected frame rate and increment.
4
You can also select angle values equivalent to the following shutter speeds: 1/100, 1/60, 1/50, 1/40, 3/100, 1/30, 1/25. Available
angle values will vary depending on the frame rate used.
5
Not available during slow motion recording.
Operating modes:
Shutter speed mode
System frequency/Frame rate
59.94 Hz 24.00 Hz 50.00 Hz
59.94P / 59.94i
1
29.97P 23.98P 24.00P 50.00P / 50.00i
1
25.00P
[Speed]
2
1/24 to 1/2000
3
[Angle]
2, 4
360.00°, 240.00°, 180.00°, 120.00°, 90.00°, 60.00°, 45.00°, 30.00°, 22.50°, 15.00°, 11.25°
[Clear Scan]
2
23.98 Hz to 250.38 Hz 24.00 Hz to 250.40 Hz
[Slow]
5
1/4, 1/8,
1/15, 1/30
1/4, 1/8, 1/15 1/3, 1/6, 1/12
1/3, 1/6,
1/12, 1/25
1/3, 1/6, 1/12
[Off]
2
1/60 1/30 1/24 1/50 1/25
Shutter Speed
68
Changing the Shutter Speed Mode and Value
You can also perform this function remotely using Browser Remote on a connected network device (A 170).
1 Open the shutter speed [Shutter Mode] submenu.
> [
v
" Camera Setup] > [Shutter Mode]
2 Select the desired mode and then press the joystick.
If you selected [Speed] (the default value), continue the procedure to select the increment scale to use when
adjusting the shutter speed; otherwise, skip to step 5.
3 Open the [Shutter Increment] submenu.
> [
v
" Camera Setup] > [Shutter Increment]
4 Select [1/3 stop] or [1/4 stop] and then press the joystick.
5 Adjust the shutter speed, angle value or clear scan
frequency using the direct setting mode.
After closing the menu, press the SHUTTER button to enter
the direct setting mode with the shutter speed highlighted.
Select the desired value and then press the joystick.
For details refer to
Using the Direct Setting Mode
(A 66).
You can also use the FUNC button and joystick to enter the
direct setting mode.
The selected shutter speed will appear on the bottom of the
screen.
NOTES
NOTES
When recording under artificial light sources such as fluorescent, mercury or halogen lamps, the screen may
flicker depending on the shutter speed. You may be able to avoid flicker by setting the shutter speed mode to
[Speed] and the shutter speed to a value matching the frequency of the local electrical system: 1/50* or 1/100
for 50 Hz systems, 1/60 or 1/120 for 60 Hz systems.
Closing down the aperture when recording under bright conditions may cause the picture to appear soft or out
of focus. To avoid the loss of sharpness due to diffraction, use a faster shutter speed, a denser ND filter
(A 71) or open up the aperture.
When the shutter speed mode is set to [Slow], bright red, green or blue dots may appear on the screen. In
such case, use a faster shutter speed or select a lower ISO speed or gain value (A 69).
When an optional RC-V100 Remote Controller is connected to the camera, you can change the shutter speed
mode with the remote controller’s SHUTTER SELECT button and the shutter speed value with the remote
controller’s SHUTTER
Í
/
Î
buttons.
* May not be available depending on the frame rate.
Using Slow Shutter Mode
When recording in dark surroundings, you can obtain a brighter picture by using slow shutter mode. You can
also use this mode when you wish to add certain effects to your recordings, such as blurring the background
during panning shots or recording a moving subject with an afterimage trail.
Image quality may not be as good as when using faster shutter speeds in brighter surroundings.
69
ISO Speed/Gain
ISO Speed/Gain
Depending on the shooting conditions, you may want to adjust the brightness of the image. You can do so by
changing the ISO speed or gain value to adjust the sensitivity of the sensor.
You can also perform this function remotely using Browser Remote on a connected network device (A 170).
Available ISO speed and gain settings
1
1
The minimum sensitivity needed to obtain the recommended dynamic range is ISO 400 / 6 dB gain (when the [Gamma] setting in
the custom picture file (A 133) is set to [Canon Log] or [Wide DR]) or ISO 800 / 12 dB gain (when it is set to [Canon Log 3]).
2
>
[
v
"
Camera Setup]
>
[ISO Increment] setting (ISO speed) or [Gain Increment] setting (gain).
3
Sensitivity settings that are outside the recommended range but can still be used by setting
>
[
v
"
Camera Setup]
>
[ISO/Gain Extended Range] to [On].
4
Available only when [ISO/Gain Extended Range] is set to [Off].
Changing the ISO Speed or Gain Value
1 Open the ISO speed/gain [ISO/Gain] submenu.
> [
v
" Camera Setup] > [ISO/Gain]
2 Select [ISO] or [Gain] and then press the joystick.
3 Open the [ISO Increment] or [Gain Increment] submenu to select the adjustment increment to use
when adjusting the ISO speed or gain, respectively.
> [
v
" Camera Setup] > [ISO Increment] (ISO speed)
> [
v
" Camera Setup] > [Gain Increment] (gain)
4 Select the desired option and then press the joystick.
5 After closing the menu, press the ISO/GAIN button to enter
the direct setting mode with the ISO speed or gain value
highlighted.
Select the desired value and then press the joystick. For
details refer to
Using the Direct Setting Mode
(A 66).
You can also use the FUNC button and joystick to enter the
direct setting mode.
The selected ISO speed/gain value will appear on the bottom
of the screen.
Operating modes:
Increment
2
Normal range Extended range
3
ISO speed
[1 stop]
(1-stop increments)
160
4
, 200, 400, 800, 1600, 3200, 6400, 12800, 25600 100, 51200, 102400
[1/3 stop]
(1/3-stop increments)
160, 200, 250, 320, 400, 500, 640, 800, 1000, 1250, 1600,
2000, 2500, 3200, 4000, 5000, 6400, 8000, 10000, 12800,
16000, 20000, 25600
100, 125, 32000, 40000, 51200,
64000, 80000, 102400
Gain
[Normal]
(3-dB increments)
–2 dB
4
, 0 dB to 42 dB –6 dB, –3 dB, 45 dB to 54 dB
[Fine]
(0.5-dB increments)
–2 dB to 42 dB 42.5 dB to 54 dB
ISO Speed/Gain
70
Using the Control Dial
You can adjust the ISO speed or gain value using the control dial
on the camera or that on the camera grip
1
.
You will need to set in advance the function of one of the control
dials to [ISO/Gain]. You can select the function assigned to each
control dial independently.
1
Supplied accessory for the C200; optional accessory for the C200B.
Assigning ISO Speed/Gain Control to a Control Dial
1 Open the [Camera Ctrl Dial] (control dial on the camera) or
[Camera Grip Ctrl Dial] (control dial on the camera grip)
submenu.
> [
B
$ System Setup] > [Camera Ctrl Dial] or
[Camera Grip Ctrl Dial]
2 Select [ISO/Gain] and then press the joystick.
Changing the ISO Speed or Gain Value
To select whether to change the ISO speed or the gain, perform the previous procedure (A 69). Turn the control
dial assigned to [ISO/Gain] to set the desired ISO speed or gain value.
NOTES
NOTES
When high ISO speeds or gain levels are set, the picture may flicker slightly.
When high ISO speeds or gain levels are set, bright red, green or blue dots may appear on the screen. In such
case, use a faster shutter speed (A 67) or select a lower ISO speed or gain value.
When the ISO speed or gain level is changed, some noise may appear momentarily on the screen. Do not
adjust the ISO speed/gain level while recording.
You can use the > [
B
$ System Setup] > [Camera Ctrl Dial Dir.] or [Camera Grip Ctrl Dial Dir.]
setting to change the direction of the adjustment when you turn the control dial on the camera or on the
camera grip, respectively.
When an optional RC-V100 Remote Controller is connected to the camera, you can adjust the ISO speed or
gain value with the remote controller’s ISO/GAIN
Í
/
Î
buttons.
Control dial
71
ND Filter
ND Filter
Using the ND filter allows you to open up the aperture to
obtain a shallower depth of field even when recording in
bright surroundings. You can also use the ND filter to avoid
the soft focus caused by diffraction when using small
apertures. By default, you can select one of 3 density levels
(2 to 6 stops) and, if you enable the extended ND range,
you can select one of 5 density levels (2 to 10 stops).
You can also perform this function remotely using Browser
Remote on a connected network device (A 170).
Press the ND FILTER + or button to select the desired ND filter setting.
Repeatedly pressing ND FILTER + button will change the ND filter setting in the following order: [ND 2 stops]
[ND 4 stops] [ND 6 stops] [ND 8 stops]* [ND 10 stops]* ND filter off. (The ND FILTER
button cycles
through the settings in reverse order.)
The selected ND filter setting will appear on the bottom of the screen.
* Only when > [
v
! Camera Setup] > [Extended ND Range] is set to [On].
NOTES
NOTES
If you set an assignable button to [ND +] or [ND –] (A 125), you can press the button to change the ND filter
setting.
Depending on the scene, the color may change when turning the ND filter on/off. Setting a custom white
balance (A 77) may be effective in such case.
About the extended ND range: When you switch to or from a density level in the extended range (8 or 10 stops),
you may notice one or both of the following circumstances.
- The focus may shift, affecting also the indication on the lens’s focus distance scale.
- Depending on the lens, the camera may not be able to focus at infinity focus.
About changing the ND filter setting using the optional RC-V100 Remote Controller:
- When the remote controller is connected to the camera, you can use the remote controller’s ND button in
the same way as the camera’s ND FILTER + button.
- For settings between 2 and 8 stops, the corresponding ND filter indicator (1 to 4, respectively) will illuminate
in orange. When the ND filter is set to 10 stops, indicators 1 and 4 will both illuminate.
Operating modes:
Adjusting the Aperture
72
Adjusting the Aperture
You can affect the brightness of your recordings or change the depth of field by adjusting the aperture.
By default, the camera is set to manual aperture but, depending on the lens used, the camera offers 3 ways to
adjust the aperture. Refer to the list of compatible lenses and functions that can be used (A 229).
Manual aperture: Adjust the aperture value manually using the control dial on the camera or on the camera grip
1
,
or remotely, using Browser Remote on a connected network device (A 170).
Push Auto Iris: Momentary automatic aperture. During manual aperture, press the PUSH AUTO IRIS button or
use Browser Remote (A 170) to temporarily adjust the aperture automatically.
Automatic aperture: The camera adjusts the aperture automatically.
1
Supplied accessory for the C200; optional accessory for the C200B.
Required settings on EF Cinema lenses
To adjust the aperture from the camera, you will need to enable automatic adjustment using the controls on the
lens. Required settings vary depending on the lens. Refer to the following table and the instruction manual of the
lens used.
Manual Aperture
You can adjust the aperture value of an EF lens using the control dial on the camera or the camera grip. You can
select the function assigned to each control dial independently.
By default, both control dials’ function is set to aperture control. If it has been changed, follow the procedure
below to set in advance the function of one of the control dials to [Iris].
Assigning aperture control to a control dial
1 Open the [Camera Ctrl Dial] (control dial on the camera) or [Camera Grip Ctrl Dial] (control dial on the camera
grip) submenu.
> [
B
$ System Setup] > [Camera Ctrl Dial] or [Camera Grip Ctrl Dial]
2 Select [Iris] and then press the joystick.
Lens Part used on the lens Setting for automatic adjustment
CN7x17 KAS S/E1
CN20x50 IAS H/E1
Iris operation change-over switch A
CN-E18-80mm T4.4 L IS KAS S
CN-E70-200mm T4.4 L IS KAS S
Iris auto/manual change-over switch A
Operating modes:
73
Adjusting the Aperture
Changing the aperture mode and value
1 Open the [Iris Mode] submenu.
> [
v
! Camera Setup] > [Iris Mode]
This setting is available only when an EF lens compatible with
automatic aperture is attached to the camera. For non-
compatible lenses, the aperture mode will be set to [Manual]
and cannot be changed. Skip to step 3.
When using a compatible EF Cinema lens, enable automatic
adjustment on the lens (A 72).
2 Select [Manual] and then press the joystick.
3 Open the [Iris Increment] submenu.
> [
v
! Camera Setup] > [Iris Increment]
4 Select [1/2 Stop] or [1/3 Stop] and then press the joystick.
You can further select [Fine Increment] from the same submenu and set it to [On] to use the smallest iris
increment allowed by the lens attached. Nevertheless, the aperture value displayed on the screen will be the
closest value in the selected increment scale.
5 Turn the control dial assigned to [Iris] to adjust the aperture.
The selected aperture value will appear on the bottom of the screen.
NOTES
NOTES
You can use the > [
B
$ System Setup] > [Camera Ctrl Dial Dir.] or [Camera Grip Ctrl Dial Dir.]
setting to change the direction of the adjustment when you turn the control dial on the camera or on the
camera grip, respectively.
If you set an assignable button to [Iris +] or [Iris –] (A 125), you can press the button to respectively open up
the aperture (smaller F values) or close it (larger F vales).
When using an EF lens with no lens contacts or most EF Cinema lenses*, you cannot adjust the aperture using
the camera. Adjust the aperture using the lens.
* Select EF Cinema lenses (A 229) support iris adjustment from this camera.
When using an EF lens that can correct the aperture value according to the position of the zoom, you can use
the > [
v
! Camera Setup] > [Zoom-Iris Correct.] setting to activate this correction.
When an optional RC-V100 Remote Controller is connected to the camera, you can adjust the aperture with
the remote controller’s IRIS dial. At default settings, turn the dial right to open up the aperture and left to close
the aperture.
When an EF Cinema lens is attached to the camera, the aperture value displayed on the screen will be a
T value. The aperture value (T value) displayed on the screen may differ from the indication on the lens’s
aperture scale.
When using an EF Cinema lens compatible with iris adjustment from the camera, when the iris is almost fully
closed, the aperture value (T value) may appear in gray on the screen.
When using an EF Cinema lens compatible with iris adjustment from the camera, when you change the
aperture value from a position of fully open or fully closed iris, multiple adjustment operations may be required
until the aperture changes.
Control dial
Adjusting the Aperture
74
Momentary Automatic Aperture - Push Auto
Iris
During manual aperture, you can press the PUSH AUTO IRIS
button to have the camera temporarily take control and
automatically adjust the aperture for an optimal exposure.
You can also perform this function remotely using Browser
Remote on a connected network device (A 170).
1 Set the iris mode to [Manual] (A 73).
When using a compatible EF Cinema lens, enable
automatic adjustment on the lens (A 72).
2 Press and hold the PUSH AUTO IRIS button.
The camera will automatically adjust the aperture to
obtain optimal exposure. As long as you hold the button pressed down,
E
will appear on the screen next to
the aperture value.
When you release the button, automatic aperture mode will end and the
E
icon will disappear. The selected
aperture value will appear on the bottom of the screen.
NOTES
NOTES
You can use the > [
v
# Camera Setup] > [AE Response] setting to change how quickly the
aperture changes during automatic aperture mode. This setting has no effect when using a CN7x17 KAS S/E1
or CN20x50 IAS H/E1 lens.
Push auto iris is not available during slow motion recording.
Automatic Aperture
When a compatible EF lens is attached to the camera, you can have the camera automatically adjust the
aperture.
1 Open the aperture [Iris Mode] submenu.
> [
v
! Camera Setup] > [Iris Mode]
2 Select [Automatic] and then press the joystick.
When using a compatible EF Cinema lens, enable automatic adjustment on the lens (A 72).
The camera will automatically adjust the aperture to obtain optimal exposure. The selected aperture value
will appear on the bottom of the screen with an
E
icon next to it.
NOTES
NOTES
If you set an assignable button to [Iris Mode] (A 125), you can press the button to toggle between the
[Automatic] and [Manual] settings when a compatible EF lens (A 229) is attached to the camera.
Automatic aperture is not available during slow motion recording.
The aperture value may change in the following cases.
- While using the built-in extender or iris compensation function of an EF Cinema lens, when you switch from
automatic aperture to manual aperture.
- When the aperture controls on the lens are switched between automatic/manual mode.
When using EF lenses that let you adjust the aperture gain, if the aperture gain is set too high, the aperture
adjustment may not be stable (aperture hunting), depending on the shooting conditions. In such case, reset
the lens's aperture gain to its initial value.
75
Adjusting the Aperture
Exposure Compensation - AE Shift
Use AE shift to compensate the exposure that was set using automatic aperture, in order to darken or lighten the
image.
You can also perform this function remotely using Browser Remote on a connected network device (A 170).
1 Open the [AE Shift] submenu.
> [
v
# Camera Setup] > [AE Shift]
2 Select an AE shift level and then press the joystick.
You can select one of 17 AE shift levels from –2.0 to +2.0.
The selected AE shift level will be displayed above the exposure bar and the camera will attempt to adjust
the exposure accordingly.
NOTES
NOTES
If you set an assignable button to [AE Shift +] or [AE Shift –] (A 125), you can press the button to adjust the
AE shift level.
The Exposure Bar
The
Î
on top of the exposure bar indicates optimal exposure without any shift
(AE±0); the scale markings indicate the deviation from optimal exposure in
1/2 EV increments. The indicator inside the exposure bar represents the current
exposure. When the difference between current and optimal exposure is larger
than ±2 EV, the indicator will flash at the edge of the exposure bar. Optimal
exposure will change depending on the light metering mode used.
Optimal exposure AE±0
Current exposure
Adjusting the Aperture
76
Light Metering Mode
Select the light metering mode to match the recording conditions. Using the appropriate setting will ensure that
the camera obtains the most suitable exposure level when automatic aperture is used.
1 Open the [Light Metering] submenu.
> [
v
# Camera Setup] > [Light Metering]
2 Select the desired option and then press the joystick.
The icon of the selected mode ( or ) appears on the left of the screen.
Options
[Backlight]: Suitable when recording backlit scenes.
[Standard]:
Averages the light metered from the entire screen, giving more weight to the subject in the center.
[Spotlight]: Use this option when recording a scene in which only a certain part of the picture is lit, for example,
when the subject is lit by a spotlight.
NOTES
NOTES
If you set an assignable button to [Backlight] or [Spotlight] (A 125), you can press the button to turn the
respective light metering mode on and off.
77
White Balance
White Balance
The camera uses an electronic white balance process to calibrate the picture and produce accurate colors under
different lighting conditions. There are 4 methods of setting the white balance.
You can also perform this function remotely using Browser Remote on a connected network device (A 170).
Custom white balance: You can use a gray card or white object with no pattern to establish the white balance
and set it to one of two custom white balance positions,
Å
A or
Å
B. When recording under fluorescent lights,
we recommend setting the custom white balance.
Preset white balance: Set the white balance to
¼
(daylight) or
É
(incandescent lamp). You can further adjust
the color temperature (K) value and the color compensation (CC) value.
Set color temperature: Allows you to set the color temperature between 2,000 K and 15,000 K, and further
adjust the color compensation (CC) value, which adjusts the color along the green/magenta gradation.
Auto white balance (AWB): The camera automatically adjusts the white balance to the optimal level.
NOTES
NOTES
The [White Balance] and [Color Matrix Tuning] settings in the custom picture file (A 136) take precedence
over the white balance set with these procedures.
You can use the > [
v
# Camera Setup] > [Shockless WB] setting to make the transition look
smoother when you change the white balance settings.
When an optional RC-V100 Remote Controller is connected to the camera, you can adjust the white balance
with the remote controller’s AWB button, A button, B button, PRESET button and
Å
button.
The color temperatures displayed on the screen are approximate. Use them only as a reference.
Custom White Balance
1 Press the WB button.
The white balance mode icon will be highlighted in
orange.
You can also use the FUNC button and joystick to enter
the direct setting mode.
2 Push the joystick up/down to select the ÅA or ÅB
icon and then press the joystick.
If a custom white balance has been stored previously,
pressing the joystick will apply the stored custom white
balance. You do not need to perform the rest of the
procedure.
3 Point the camera at a gray card or white object so
that it fills the whole screen.
Use the same lighting conditions you plan to use when recording.
Operating modes:
White Balance
78
4 Press the
Å
button.
•The
Å
A or
Å
B icon will flash quickly.
Make sure the gray card or white object fills the screen until the procedure is completed.
Once the icon stops flashing, the procedure is completed. The setting is retained even if you turn off the
camera.
The selected color temperature/color compensation (CC) value will be set and will appear on the screen
next to the white balance icon.
NOTES
NOTES
Readjust the custom white balance if the light source or ND filter setting changes.
Very rarely and depending on the light source,
Å
may keep flashing (it will change to a slow flashing). The
result will still be better than with the auto white balance.
After the camera registers a custom white balance the color temperature or CC value may appear in gray. This
indicates that the value registered exceeds the range of values that can be displayed but the white balance is
correctly calibrated and you can continue shooting.
Color Temperature/Preset White Balance
1 Press the WB button.
The white balance mode icon will be highlighted in orange.
You can also use the FUNC button and joystick to enter the direct setting mode.
2 Push the joystick up/down to select the
¼
or
É
icon (preset white balance), or the
È
icon (color
temperature setting).
Press the joystick to set the preset setting or the default color temperature. To fine-tune the preset white
balance settings or change the color temperature, continue the procedure instead of pressing the joystick.
3 Press the
Å
button.
You can also press the FUNC button or push the joystick right.
The color temperature will be highlighted in orange. To adjust the color compensation (CC) value, push the
joystick right again.
4 Push the joystick up/down to change the color temperature/color compensation (CC) value and then
press the joystick.
The selected color temperature/color compensation (CC) value will be set and will appear on the screen
next to the white balance icon.
Adjustment ranges
White balance mode/setting
Adjustment range
Color temperature (K) Color compensation (CC) value
¼
(daylight) 4,300 K to 8,000 K
–5 to +5
É
(incandescent lamp) 2,700 K to 3,700 K
È
(set color temperature) 2,000 K to 15,000 K –20 to +20
79
White Balance
Auto White Balance (AWB)
The camera constantly adjusts the white balance automatically to achieve an optimal level. The camera will
adjust the white balance if the light source changes.
1 Press the WB button.
The white balance mode icon will be highlighted in orange.
You can also use the FUNC button and joystick to enter the
direct setting mode.
2 Push the joystick up/down to select the icon and then
press the joystick.
The selected color temperature/color compensation (CC) value
will be set and will appear on the screen next to the white
balance icon.
NOTES
NOTES
Custom white balance may provide better results in the following cases:
- Changing lighting conditions
-Close-ups
- Subjects in a single color (sky, sea or forest)
- Under mercury lamps and certain types of fluorescent and LED lights
You can use the > [
v
# Camera Setup] > [AWB Response] setting to change how quickly the
white balance changes in auto white balance (AWB) mode.
If you set an assignable button to [AWB Lock] (A 125), you can press the button to lock the current white
balance settings set automatically by the camera. To cancel the lock, press the button again (resume auto
white balance mode) or select a different white balance setting.
Auto white balance is not available during slow motion recording.
Adjusting the Focus
80
Adjusting the Focus
Depending on the lens used, the camera offers several ways to focus and incorporates Dual Pixel CMOS AF
technology for advanced autofocus performance. Refer to the list of compatible lenses and functions that can be
used (A 229). You can also adjust the focus remotely using Browser Remote on a connected network device
(A 170).
Manual focus: Turn the focus ring on the lens to adjust the focus. The camera offers several focus assistance
functions (A 82) to help you focus more accurately when using the manual focus.
One-shot AF
1
: With the lens’s focus mode switch set to AF, you will be able to focus manually but still have the
option to press the ONE-SHOT AF button to let the camera focus automatically once on the subject inside the
AF frame.
AF-Boosted MF
1
: Focus manually most of the way and let the camera finish focusing automatically.
Continuous AF
1
: The camera continuously focuses on the subject inside the AF frame. You can use the focus
lock function (A 86) to change the composition of the picture while keeping the focus on the selected spot.
Face AF
1
: The camera automatically detects a person’s face, focuses on it and can track it if that person moves.
Tracking
1
: After you select a subject, the camera keeps focusing it and tracks the subject if it moves.
Note that some methods allow you to operate aspects of the focus by touching the LCD screen
2
.
1
Not available when a manual focus lens is attached to the camera.
2
Supplied accessory for the C200; optional accessory for the C200B.
Focusing methods and required settings
1
For the necessary settings on compatible EF Cinema lenses, see the table below.
2
> [
v
$ Camera Setup] > [AF Mode].
3
Depending on the lens, the focus ring may be disabled when the focus mode switch is set to AF.
4
> [
v
% Camera Setup] > [Face Detection].
5
To activate tracking, set an assignable button to [Tracking] and press the button.
Operating modes:
Focusing method Focus mode switch on an EF lens
1
AF mode
2
Manual focus
Focus ring
MF
AF
3
[One Shot]
Browser Remote AF
One-shot AF
ONE-SHOT AF button
AF [One Shot]
Browser Remote
AF-Boosted MF
Focus ring
Camera (automatic)
AF [AF-Boosted MF]
Browser Remote
Camera (automatic)
Continuous AF
Automatic (camera or Browser
Remote)
AF [Continuous]
Face AF
4
/Tracking
5
Camera or Browser Remote AF
81
Adjusting the Focus
Required settings on EF Cinema lenses
To adjust the focus from the camera, you will need to change the focus mode using the controls on the lens.
Required settings vary depending on the lens. Refer to the following table and the instruction manual of the lens
used.
Manual Focus
Focus manually using the focus ring on the lens.You can also perform this function remotely using Browser
Remote on a connected network device (A 170).
The autofocus mode is set to [One Shot] by default. If you need to change the setting, start the procedure from
the beginning. Otherwise, you can start from step 3 below.
1 Open the focus [AF Mode] submenu.
> [
v
$ Camera Setup] > [AF Mode]
2 Select [One Shot] and then press the joystick.
On an EF lens, you can set the lenss focus mode switch to MF. On a compatible EF Cinema lens, enable
manual adjustment on the lens (A 80).
3 Press the FOCUS GUIDE button to display the focus guide.
If you are not using the camera grip, you can alternatively set an
assignable button to [Focus Guide] (A 125).
4 On the LCD screen
1
, touch the subject to focus on.
Alternatively, you can push the joystick up/down/left/right.
You will not be able to touch the subject if the focus guide is not
displayed.
For details on using the focus guide, refer to
Dual Pixel Focus
Guide
(A 82).
1
Supplied accessory for the C200; optional accessory for the C200B.
5 Turn the focus ring to adjust the focus.
NOTES
NOTES
With some EF lenses, you may be able to operate the focus ring even when the focus mode switch is set to
AF.
If you operate the zoom after focusing, the focus on the subject may be lost.
If you focus manually and then leave the camera with the power turned on, the focus on the subject may be
lost after a while. This possible slight shift in focus is a result of the internal temperature rising in the camera
and lens. Check the focus before resuming shooting.
When adjusting the focus, be careful not to touch the front of the lens or moving parts on the lens except for
the focus ring.
When an optional RC-V100 Remote Controller is connected to the camera, you can adjust the focus with the
remote controller’s FOCUS dial. At default settings, turn the dial right to focus farther and left to focus nearer.
Lens Part used on the lens Setting for automatic adjustment Setting for manual adjustment
EF lens Focus mode switch AF MF
CN7x17 KAS S/E1
CN20x50 IAS H/E1
Focus operation change-over knob SERVO MANU.
CN-E18-80mm T4.4 L IS KAS S
CN-E70-200mm T4.4 L IS KAS S
Autofocus/Manual Focus
change-over switch
AF MF
Adjusting the Focus
82
Using the Focus Assistance Functions
In order to focus more accurately, you can use the following focus assistance functions: Dual Pixel Focus Guide,
an onscreen guide that shows you if the picture is in focus; peaking, which creates a clearer contrast by
emphasizing the outlines of the subject; and magnification, which enlarges the image on the screen. You can use
peaking and the focus guide or peaking and magnification simultaneously for greater effect.
Dual Pixel Focus Guide
The focus guide gives you an intuitive visual indication of the current focus distance and the direction and
amount of adjustment necessary to bring the picture into full focus. When used in combination with face
detection (A 87), the guide will focus on the vicinity of the eyes of the person detected as the main subject.
1 Press the FOCUS GUIDE button to display the focus guide.
If you are not using the camera grip, you can alternatively set an assignable button to [Focus Guide]
(A 125).
Alternatively, you can use the > [
A
! Assistance Functions] > [Focus Guide] setting to turn the
focus guide on and off.
2 If necessary, use the joystick to move around the focus frame.
When using the LCD monitor
1
, you can move the focus frame by touching the area of the screen to focus
on.
You can display a secondary focus frame using the > [
A
! Assistance Functions] > [Focus
Guide 2nd Frame] setting. When both focus frames are displayed on the screen, you can press the joystick
to switch the focus guide between them.
1
Supplied accessory for the C200; optional accessory for the C200B.
NOTES
NOTES
With subjects or in situations where autofocus may not work well (A 85), the focus guide may not work
correctly.
The Dual Pixel Focus Guide function cannot be used in the following cases:
- While the focus is being adjusted automatically using one-shot AF, AF-Boosted MF or continuous AF.
- When the aperture value used is F11 or larger.
- When a manual focus lens is attached to the camera, except for compatible EF Cinema lenses (A 229).
FOCUS GUIDE button
In focusFocus farther
(large adjustment)
Focus farther
(small adjustment)
Focus closer
(small adjustment)
Focus closer
(large adjustment)
Cannot determine
adjustment
83
Adjusting the Focus
- When the digital tele-converter is set to an option other than [Off].
When the Dual Pixel Focus Guide function is used together with Face AF or tracking, the focus guide may not
focus the main subject’s eyes correctly, depending on the direction in which the face is turned.
Peaking
The camera offers two peaking levels.
1 Press the PEAKING button.
The peaking icon (
J
or
K
) appears on the left of the screen and the outlines in the image will be
emphasized, depending on the focus.
Press the button again to turn off peaking.
Alternatively, you can use the > [
A
" Assistance Functions] > [Peaking: VIDEO Output] or
[Peaking: VF Output]
1
setting to turn peaking on and off.
1
k
only.
2 Open the peaking’s [Peaking] submenu to select the peaking level.
> [
A
" Assistance Functions] > [Peaking]
3 Select the desired level and then press the joystick.
Magnification
1 Press the MAGN. button.
^
appears at the left of the screen and the center of the screen
1
is magnified approximately 2 times.
The orange frame displayed on the top right of the screen (magnification frame) shows the approximate part
of the image shown magnified.
Press the joystick to further increase the magnification to approximately 4 times. Press the joystick again to
return to the previous magnification.
2 If necessary, use the joystick to move around the magnification frame and check other parts of the image.
When using the LCD monitor
2
, you can also drag your finger across the screen to move the frame.
Press the CANCEL button to return the magnification frame to the center position.
3 Press the MAGN. button again to cancel the magnification.
1
If one of the AF frames or a face detection frame is displayed on the screen, the area around the active frame will be magnified
instead.
2
Supplied accessory for the C200; optional accessory for the C200B.
NOTES
NOTES
About Peaking/Magnification:
- You can use the > [
A
" Assistance Functions] > [Peaking 1] and [Peaking 2] settings to set the
color, gain and frequency of the two peaking levels independently of each other.
- You can select whether to display the peaking effect from the VIDEO terminal or on the camera viewfinder
(
k
only) with the > [
A
" Assistance Functions] > [Peaking: VIDEO Output] and [Peaking:
VF Output] settings.
- You can select whether to display the magnified image on the camera viewfinder (
k
only) and from the
VIDEO terminal, or from the SDI/HDMI OUT
1
terminal with the > [
A
# Assistance Functions] >
[Magn.: VF+VIDEO Output] (
l
[Magn.: VIDEO Output]) and [Magn.: SDI/HDMI Output] settings.
- You can also use the > [
A
" Assistance Functions] > [B&W during Peaking] or >
[
A
# Assistance Functions] > [B&W during Magn.] to switch the screen to black & white while using the
respective assistance function.
- The assistance functions will not affect your recordings.
- The magnified image will stop being displayed if you change the recording format or resolution and color
sampling setting.
1
Magnification is not available when the video output from the HDMI terminal is 4K (3840x2160).
While color bars are displayed, peaking, magnification and waveform monitor are not available.
Adjusting the Focus
84
One-Shot AF
In this focus mode, you will focus manually in most situations but still have the option to have the camera focus
automatically only once on the subject inside the AF frame that appears on the screen. You can also change the
size and position of the AF frame.
1 Set the focus mode switch on the lens to AF.
On a compatible EF Cinema lens, enable automatic
adjustment on the lens (A 81).
will appear on the left of the screen.
2 Open the focus [AF Mode] submenu.
> [
v
$ Camera Setup] > [AF Mode]
3 Select [One Shot] and then press the joystick.
4 If necessary, change the size and position of the AF
frame (A 86).
You can move the AF frame by touching the desired
position on the LCD screen.
5 Press and hold the ONE-SHOT AF button.
A white AF frame will appear on the screen and the camera will focus automatically. When you are using
Face AF, the face detection frame around the face of the person who has been determined to be the main
subject will turn white.
When correct focus has been achieved, the AF frame turns green. If the camera cannot focus automatically,
the AF frame will turn red.
The AF frame will disappear when you release the ONE-SHOT AF button.
NOTES
NOTES
One-shot AF will not work in the following cases.
- When slow motion recording is activated.
- When the shutter speed mode is set to [Slow] and the shutter speed is set to 1/4 or 1/3.
- When Face AF is set to [Face Only] and a face has not been detected.
- When the digital tele-converter is activated.
When the aperture value used is F11 or higher, Dual Pixel CMOS AF will not work and the camera will focus
using contrast-detection autofocus.
AF-Boosted MF
In this focus mode, you can focus manually most of the way and let the camera finish focusing automatically.
This is very convenient when you want to make certain that your 4K recordings are in sharp focus.
Additionally, with this mode, if the camera cannot evaluate how to adjust the focus, it will not perform unreliable
focus adjustments. This results in an overall smoother focusing operation than with continuous AF.
1 Set the focus mode switch on the lens to AF.
On a compatible EF Cinema lens, enable automatic adjustment on the lens (A 81).
will appear on the left of the screen.
2 Open the focus [AF Mode] submenu.
> [
v
$ Camera Setup] > [AF Mode]
3 Select [AF-Boosted MF] and then press the joystick.
When the focus is in the manual adjustment range, a yellow focus frame will appear on the screen.
4 If necessary, change the size and position of the AF frame (A 86).
85
Adjusting the Focus
5 Turn the focus ring to adjust the focus.
Focus manually to bring the subject closer into focus. When the focus enters the automatic adjustment
range, the focus frame will turn white and the camera will then finish focusing automatically.
While the focus stays within the automatic adjustment range, the camera will keep the subject in focus
automatically.
Continuous AF
The camera will focus automatically on a subject inside the main area of the image (approximately 80% of the
screen’s length and width).
1 Set the focus mode switch on the lens to AF
On a compatible EF Cinema lens, enable automatic adjustment on the lens (A 81).
will appear on the left of the screen.
2 Open the focus [AF Mode] submenu.
> [
v
$ Camera Setup] > [AF Mode]
3 Select [Continuous] and then press the joystick.
A white AF frame will appear on the screen. If necessary, change the size and position of the AF frame
(A 86).
When you are using Face AF, a white detection frame will appear around the face of the person who has
been determined to be the main subject.
NOTES
NOTES
About the autofocus (AF) functions:
The point where the camera focuses may change slightly depending on shooting conditions, such as subject,
brightness and zoom position. Check the focus before resuming shooting.
Autofocus may take longer in the following cases.
- When the frame rate set in the video configuration is set to 29.97P, 25.00P, 24.00P or 23.98P.
- With some EF lenses, the camera may take longer to focus automatically or may not be able to focus
correctly. Visit your local Canon website for the latest information.
When using autofocus with compatible EF lenses, you can change various aspects of the autofocus function
with the following settings. Visit your local Canon website for the latest information.
- > [
v
$ Camera Setup] > [Apply AF Speed Limit] to select whether the selected AF speed is
applied at all times or only while recording.
- > [
v
$ Camera Setup] > [AF Speed] to set the AF speed (the speed at which the focus is
adjusted) to one of 10 levels.
- > [
v
$ Camera Setup] > [AF Response] to set the responsiveness of the autofocus function to
one of 7 levels.
- While using continuous AF, you can hold the ONE-SHOT AF button pressed down to temporarily adjust the
focus using the maximum AF speed and AF response. This is helpful when you want to focus quickly after
focus was lost or to keep a subject in focus while you follow it.
Continuous AF will not work in the following cases.
- When using an EF lens that does not have a focus mode switch.
- While adjusting the aperture, except when using an EF lens compatible with automatic aperture (A 229).
- While adjusting the focus using a remote controller attached to the REMOTE terminal.
- When slow motion recording is activated.
- When the digital tele-converter is activated.
Adjusting the Focus
86
Autofocus may not work well on the following subjects or in the following cases. In such case, focus manually.
- When an ISO speed or gain value in the extended range is selected (A 69).
- When the [Gamma] setting in the custom picture file (A 133) is set to one of the Canon Log settings or
[Wide DR].
- When using small apertures.
- When subjects at different distances appear inside the AF frame.
Activating AF Lock
While using continuous AF or AF-Boosted MF, you can lock the focus on a certain subject and then move the
camera to change the composition. To use AF lock, you must set an assignable button to [AF Lock] in advance.
1 Set an assignable button to [AF Lock] (A 125).
2 While the autofocus is active, press the assignable button.
The focus will be locked and and the AF frame will turn gray. When you are using Face AF, the face
detection frame around the main subject will turn gray.
Press the button again to cancel the AF lock.
NOTES
NOTES
AF lock will be canceled automatically in the following cases:
- If the camera is turned off or the camera’s system frequency is changed.
- If the lens is removed or replaced.
-If > [
v
$ Camera Setup] > [AF Mode] is changed to [One Shot].
- If the camera is set to slow motion recording mode.
- When the digital tele-converter is activated.
Changing the AF Frame Size and Position
You can change the size and position of the AF frame that appears on the screen while using one of the
autofocus functions.
1 Open the [AF Frame Position] submenu.
> [
v
$ Camera Setup] > [AF Frame Position]
2 Select the desired option and then press the joystick.
3 Open the [AF Frame Size] submenu.
> [
v
$ Camera Setup] > [AF Frame Size]
4 Select the desired option and then press the joystick.
Options
[Selectable]: You can move the AF frame using the joystick or by touching the LCD screen. Press the
CANCEL button to return the frame to the center of the screen.
[Center Frame]: A fixed AF frame appears at the center of the screen.
[Large]: Standard AF frame size.
[Small]: Smaller AF frame size (about 1/3 the standard size).
NOTES
NOTES
When the digital tele-converter or EF-S lens correction is activated, the AF frame will return to the center.
- Reflective surfaces
- Subjects with low contrast or without vertical lines
- Fast moving subjects
- Through dirty or wet windows
-Night scenes
- Subjects with a repetitive pattern
87
Adjusting the Focus
Face Detection
When the face detection function is activated, the camera will detect people’s faces. When there are a number of
people in the picture, one person will be determined to be the main subject but you have the option to select a
different person as the main subject. The camera will keep tracking the main subject even when it moves.
You can use face detection with one of the autofocus functions to let the camera focus on the main subject
automatically (Face AF). You can also combine face detection with the Dual Pixel Focus Guide function (A 82)
to help you focus on the main subject manually.
1 Open the [Face Detection] submenu.
> [
v
% Camera Setup] > [Face Detection]
2 Select [On] and then press the joystick.
3 Open the [Face AF] submenu.
> [
v
% Camera Setup] > [Face AF]
4 Select the desired option and then press the joystick.
5 Point the camera at the subject.
A face detection frame will appear around all detected faces. The person identified as main subject will have
a face detection frame with small arrows (
Þ
) on the sides. If necessary, push the joystick left/right or
touch the desired subject on the LCD screen to change the main subject when there is more than one
person.
During continuous AF, the camera will keep focusing on the main subject’s face. During one-shot AF, the
camera will focus on the main subject’s face while you hold the ONE-SHOT AF button pressed down.
If you use face detection together with the tracking function (A 88), the camera will be able to track the
selected main subject more reliably.
Options
[Face Priority]: When there is no face detected, the camera focuses automatically according to the AF mode
currently selected.
[Face Only]: When there is no face detected, the camera locks the focus.
Face AF operation by AF mode
> [
v
$ Camera Setup] >
[AF Mode] setting and focus operation
> [
v
% Camera Setup] > [Face AF] setting
[Face Priority] [Face Only]
Face detected No face detected Face detected No face detected
[One Shot] while the ONE-SHOT AF button is not pressed Manual focus
[One Shot] while the ONE-SHOT AF button is held pressed down
Focus on the
detected face
Focus on the
subject inside
the AF frame
Focus on the
detected face
Manual focus
[Continuous] (autofocus),
[AF-Boosted MF] within the automatic adjustment range
[AF-Boosted MF] within the manual adjustment range
(yellow AF frame)
Manual focus
Adjusting the Focus
88
NOTES
NOTES
In certain cases, faces may not be detected correctly. Typical examples include:
- Faces extremely small, large, dark or bright in relation to the overall picture.
- Faces that are turned to the side, at a diagonal, partially hidden or upside-down.
Face detection cannot be used in the following cases:
- When the shutter speed used is slower than 1/30 (59.94 Hz recordings), 1/25 (50.00 Hz recordings) or 1/24
(24.00 Hz recordings).
- When slow motion recording is activated.
- When a manual focus lens is attached to the camera.
- When the digital tele-converter is activated.
The camera may mistakenly detect the faces of non-human subjects. In such case, turn face detection off.
If you set an assignable button to [Face Detection] (A 125), you can press the button to turn the function on
and off. If you set an assignable button to [Face AF], you can press the button to toggle between the face
detection options.
Tracking a Specific Subject
You can have the camera track other moving subjects that are not faces and also combine the tracking function
with one of the autofocus functions to let the camera focus on the desired subject automatically.
To use the tracking function, you will need to set an assignable button to [Tracking] in advance.
1 Set an assignable button to [Tracking] (A 125).
2 Press the assignable button.
The subject selection mark
I
will appear on the screen.
Press the assignable button again or the CANCEL button to exit the subject selection screen.
3 Select the subject you want to track.
Push the joystick up/down/left/right or touch the desired subject on the LCD screen to place the center of
the
I
mark on the desired subject and then press the joystick. If the tracking failed, the
I
mark will turn
red momentarily. Select the subject again.
4 The
I
mark changes to a tracking frame and the camera will start tracking the selected subject.
During continuous AF, the camera will keep focusing on the selected subject. During one-shot AF, the
camera will focus on the selected subject while you hold the ONE-SHOT AF button pressed down.
Press the joystick again or press the assignable button to return to the subject selection screen and select a
different subject, or press the CANCEL button to end the tracking function and return the camera to the
focus mode that was used previously.
NOTES
NOTES
The camera may start tracking the incorrect subject if there is another subject in the picture with similar color/
pattern characteristics. In that case, press the joystick to return to the selection screen and select the desired
subject again.
89
Zooming
Zooming
When an EF Cinema lens compatible with zooming or the optional PZ-E1 Power Zoom Adapter with a
compatible EF lens is attached to the camera, you can use the joystick on the camera grip
1
to operate the zoom.
You can also zoom remotely using Browser Remote on a connected network device (A 170).
1
Supplied accessory for the C200; optional accessory for the C200B.
Required settings on EF Cinema lenses
To operate the zoom from the camera, you will need to enable automatic adjustment using the controls on the
lens. Required settings vary depending on the lens. Refer to the following table and the instruction manual of the
lens used.
* When using with the optional PZ-E1 Power Zoom Adapter. Make the required setting on the PZ-E1, not the lens.
1 Enable automatic zoom adjustment on the lens.
2 Open the zoom activation submenu.
> [
v
% Camera Setup] > [Camera Grip Zoom]
3 Select [On] and then press the joystick.
4 Open the zoom speed submenu.
> [
v
% Camera Setup] > [Camera Grip Zoom Speed]
5 Select the desired zoom speed and then press the joystick.
Zoom speeds are constant; [1] being the slowest and [16] the fastest.
6 Close the menu and use the joystick on the camera grip to zoom.
Push the joystick up to zoom in (telephoto) and push it down to zoom out (wide-angle).
NOTES
NOTES
When an optional RC-V100 Remote Controller is connected to the camera and the lens is correctly set, you
can zoom with the remote controller’s ZOOM dial.
When using slow zoom speeds, it may take longer for the lens to start moving.
You can use the > [
v
% Camera Setup] > [Tele-converter] setting to set the digital tele-converter
to approximately 1.5x, 3x or 6x.
If you set an assignable button to [Tele-converter] (
A
125), you can press the button to turn the digital tele-
converter on and off. The digital tele-converter will activate at the previously selected level.
Lens Part used on the lens Setting for automatic adjustment
CN7x17 KAS S/E1
CN20x50 IAS H/E1
Zoom operation change-over knob SERVO
CN-E18-80mm T4.4 L IS KAS S
CN-E70-200mm T4.4 L IS KAS S
Zoom change-over switch SERVO
EF-S 18-135mm F3.5-5.6 IS USM* Zoom mode switch PZ (Power Zoom)
Operating modes:
Onscreen Markers and Zebra Patterns
90
Onscreen Markers and Zebra Patterns
Using onscreen markers allows you to make sure your subject is correctly framed and is within the appropriate
safe area. The zebra patterns help you identify areas that are overexposed. The onscreen markers and zebra
pattern will not affect your recordings.
Displaying Onscreen Markers
The camera offers several onscreen markers. You can display multiple onscreen markers simultaneously.
1 Open a marker activation submenu.
> [
A
& Assistance Functions] > [Center Marker], [Horizontal Marker], [Grid Marker], [Aspect
Marker]
> [
A
' Assistance Functions] > [Safe Area Marker]
2 Select a marker you wish to display, select the desired marker color and then press the joystick.
Select [Off] to turn off the selected marker.
You can display multiple markers simultaneously. Repeat this step as necessary.
If you selected [Aspect Marker] or [Safe Area Marker], select the desired safe area or aspect ratio with the
following procedures (A 91) before continuing with step 3.
3 Select [Markers: VF+VIDEO Output] (
l
[Markers: VIDEO Output]) and/or [Markers: SDI/HDMI
Output], select [On] and then press the joystick.
Select [Markers: VF+VIDEO Output] (
l
[Markers: VIDEO Output]) to display the markers on the
viewfinder (
k
only) and from the VIDEO terminal; select [Markers: SDI/HDMI Output] to display the
markers from the SDI/HDMI OUT terminal. Select [Off] instead to not display the onscreen markers on the
respective video outputs.
Options
[Center Marker]: Displays a small marker that indicates the center of the screen.
[Horizontal Marker]: Displays a horizontal line to help you compose level shots.
[Grid Marker]: Displays a grid that allows you to frame your shots correctly (horizontally and vertically).
[Aspect Marker]: Displays markers that indicate various aspect ratios to help you keep your shot within that
area. Available options for [Marker Aspect Ratio] are [4:3], [13:9], [14:9], [16:9], [1.375:1],
[1.66:1], [1.75:1], [1.85:1], [1.90:1], [2.35:1], [2.39:1] and [Custom], a free aspect ratio set
by the user.
[Safe Area Marker]: Displays indicators that show various safe areas, such as the action safe area and text
safe area. You can select the core area used as the basis for calculating the safe area and
a percentage ([80%], [90%], [92.5%] or [95%]), relative to that core area.
Operating modes:
Aspect guide 4:3
Center marker
Grid
Level marker
Safe area 80%
out of the whole
picture
91
Onscreen Markers and Zebra Patterns
To set the aspect ratio
1 Select [Marker Aspect Ratio], select the desired option and then press the joystick
If you selected one of the preset aspect ratios, the rest of the procedure is not necessary. If you selected
[Custom], continue the procedure to set the desired aspect ratio.
2 Select [Marker Custom Asp. Ratio] and then press the joystick.
3 Push the joystick up/down to select the first digit of the aspect ratio and then press the joystick to move to the
next.
Change the rest of the digits in the same way.
4 Select [Set] and then press the joystick.
To set the safe area
If an aspect marker is not selected, the safe area will be calculated as a percentage of the whole image ([Whole
Picture]) and you can only select the percentage (step 2). To calculate the safe area as a percentage of an aspect
ratio marker ([Selected Aspect Marker]), select an aspect ratio marker in advance and perform the procedure
from the beginning.
1 Select [Basis for Marker Safe Area], select the desired option and then press the joystick.
2 Select [Marker Safe Area %], select the desired percentage and then press the joystick.
NOTES
NOTES
You can turn off all other onscreen displays, leaving only the onscreen markers (A 60).
Markers are not available when the video output from the HDMI OUT terminal is 4K (3840x2160) recorded at
59.94P or 50.00P.
If you set an assignable button to [Markers: All] (A 125), you can press the button to turn the onscreen
markers on and off.
Displaying Zebra Patterns
The camera has a zebra pattern function that shows black and white diagonal stripes over
areas that are overexposed. There are two types of zebra patterns and you can display both
simultaneously. Zebra 1 lets you identify areas within a certain range (±5% of a specified level
from 5% to 95%) while zebra 2 lets you identify areas that are over a specified level (from 0%
to 100%).
1 Open the [Zebra] submenu.
> [
A
$ Assistance Functions] > [Zebra]
2 Select a zebra pattern.
3 Open the zebra level submenu.
> [
A
$ Assistance Functions] > [Zebra 1 Level] or
[Zebra 2 Level]
4 Select the desired zebra level and then press the joystick.
5 Press the ZEBRA button to activate the selected zebra
pattern.
Alternatively, before closing the menu, you can also select [Zebra: VIDEO Output] or [Zebra: VF Output]
1
,
select [On] and then press the joystick to display the zebra pattern from the VIDEO terminal or on the
camera viewfinder
1
.
1
k
only.
Zebra 1
Zebra 2
Setting the Time Code
92
Setting the Time Code
In mode, the camera generates a time code signal and records it with the recorded clips. The time code
signal can be output from the SDI terminal and HDMI OUT terminal. In mode, the time code embedded
in the clip being played back can be output from the SDI terminal.
Depending on the frame rate used, you may be able to select between a drop frame an non-drop frame time
code signal (A 93). The default mode varies depending on the country/region of purchase and, though the time
code display style is different for DF and NDF, in this section the NDF display style is used for simplicity’s sake.
Selecting the Time Code Mode
You can select the camera’s time code mode.
1 Open the [Time Code Mode] submenu.
> [
B
# System Setup] > [Time Code Mode]
2 Select the desired option and then press the joystick.
Options
[Preset]: The time code starts from an initial value you can select in advance. The default initial time code
is 00:00:00:00.
See the following procedures to select the time code running mode and set the initial time code.
[Regen.]: The camera will read the selected recording media and the time code will continue from the last
time code recorded on the recording media. The time code runs only while recording so clips
recorded consecutively on the same recording media will have continuous time codes.
Setting the Time Code Running Mode
If you set the time code mode to [Preset], you can select the time code running mode.
1Open the [Time Code Run] submenu.
> [
B
# System Setup] > [Time Code Run]
2 Select the desired option and then press the joystick.
Options
[Rec Run]: The time code runs only while recording so clips recorded consecutively on the same recording
media will have continuous time codes.
[Free Run]: The time code starts running the moment you press the joystick and keeps running regardless of
the camera’s operation.
Operating modes:
93
Setting the Time Code
Setting the Time Code’s Initial Value
If you set the time code mode to [Preset], you can set the initial value of the time code.
1 Open the [Set Time Code] submenu.
> [
B
# System Setup] > [Set Time Code]
2 Select [Change] and then press the joystick.
The time code setting screen appears with an orange selection frame indicating the hours.
To reset the time code to [00:00:00:00], select [Reset] instead. If the running mode is set to [Free Run], the
time code will be reset the moment you press the joystick and keep running continuously from 00:00:00:00.
3 Push the joystick up/down to set the hours and press the joystick to move to the minutes.
Change the rest of the fields (minutes, seconds, frame) in the same way.
Press the CANCEL button to close the screen without setting the time code.
4 Select [Set] and press the joystick to close the screen.
If the running mode is set to [Free Run], the time code will start running from the selected time code the
moment you press the joystick.
Selecting Drop or Non-Drop Frame
When the frame rate is set to 59.94P, 59.94i or 29.97P, you can select between a drop frame (DF) or non-drop
frame (NDF) time code, depending on how you plan to use your recordings.
With all other frame rates, the time code is set to non-drop frame (NDF) and cannot be changed.
1 Open the [Time Code DF/NDF] submenu.
> [
B
# System Setup] > [Time Code DF/NDF]
2 Select [DF] or [NDF] and then press the joystick.
The time code display will differ depending on the setting. When you select [DF], the time code will appear
as [00:00:00.00]; when you select [NDF], it will appear as [00:00:00:00].
Putting the Time Code Display on Hold
If you set an assignable button to [Time Code Hold] (A 125), you can press the button to freeze the display of
the time code*. While the time code display is put on hold, [H] will appear on the screen next to the time code.
The time code continues to run normally while the time code display is on hold. When you resume the time code
display, the current time code will be displayed.
* The time code signal output from the terminals will not be put on hold. However, the time code displayed on a monitor connected
to the HDMI OUT terminal will be put on hold.
Operating modes:
Operating modes:
Setting the Time Code
94
About the Time Code Display
An icon may appear next to the time code depending on the operation. Refer to the following table.
NOTES
NOTES
The frames value of the time code runs from 0 to 23 (frame rate set to 23.98P or 24.00P), from 0 to 24 (frame
rate set to 25.00P, 50.00i or 50.00P), or from 0 to 29 (all other frame rates). However, if the frame rate is set to
23.98P or 24.00P and the SDI/HDMI scan mode is set to [PsF], the frames value will run from 0 to 29.
When you are using interval recording, frame recording or slow motion recording, you cannot select the [Free
Run] running mode. Conversely, when you are using pre-recording mode, [Free Run] is set automatically and
cannot be changed.
When you are using interval recording, frame recording or slow motion recording, the time code signal will not
be output from the SDI terminal or HDMI OUT terminal.
When you mix drop frame and non-drop frame time codes, there might be a discontinuity in the time code at
the point where the recording starts.
When you are using the [Free Run] running mode, the time code will continue running as long as the lithium
button battery has some charge left, even if you disconnect all other power sources.
If you set an assignable button to [Time Code] (A 125), you can press the button to open the
[
B
# System Setup] menu.
Icon Description
R The time code mode is set to [Regen.].
P The time code mode is set to [Preset] and the running mode is set to [Rec Run].
F The time code mode is set to [Preset] and the running mode is set to [Free Run].
H Time code display is on hold.
No icon Time code during clip playback.
95
Setting the User Bit
Setting the User Bit
The user bit display can be selected from the date or the time of recording, or an identification code consisting of
8 characters in the hexadecimal system. There are sixteen possible characters: the numbers 0 to 9 and the
letters A to F. The user bit is recorded with RAW or XF-AVC clips and can be output from the SDI terminal and
HDMI OUT terminal.
1 Open the [User Bit Type] submenu.
> [
B
# System Setup] > [User Bit Type]
2 Select the desired user bit type and press the joystick.
Select [Setting] to set your own identification code, [Time] to use the time as the user bit, or [Date] to use the
date as the user bit.
If you selected [Time] or [Date], the rest of the procedure is not necessary. If you selected [Setting], continue
the procedure to set the identification code.
3 Select [Change] and then press the joystick.
The user bit setting screen appears with an orange selection frame on the leftmost digit.
To reset the user bit to [00 00 00 00], select [Reset] instead.
4 Push the joystick up/down to select the first character and press the joystick to move to the next.
Change the rest of the characters in the same way.
Press the CANCEL button to close the screen without setting the user bit.
5 Select [Set] and press the joystick to close the screen.
Operating modes:
Recording Audio
96
Recording Audio
The camera features 4-channel linear PCM and 2-channel MPEG-2 AAC-LC
1
audio recording and playback. The
sampling frequency is 48 kHz and the audio sampling bit depth depends on the recording format. You can
record audio using the INPUT terminals (commercially available microphones, analog line-in audio sources, AES/
EBU digital audio sources), the MIC terminal (commercially available microphones) or the built-in monaural
microphone
2
.
An audio signal will also be output with the video signal from the SDI terminal and HDMI OUT terminal. You can
record this audio signal on an external recorder.
1
Available for MP4 clips only.
2
Only for recording notes while shooting.
Audio Settings and Recorded Audio Channels
Which audio inputs are recorded to which audio channels is determined by a combination of menu settings and
audio-related controls on the camera. Refer to the camera illustration below and the table on the next page.
INPUT terminals’ audio
input selection switches
ANALOG switches
(INPUT terminals’ analog
audio source selection)
INPUT terminals’ audio
input selection switches
ANALOG switches
(INPUT terminals’ analog
audio source selection)
97
Recording Audio
1
> [
¡
! Audio Setup] > [Select CH1/CH2 Input] and [Select CH3/CH4 Input] settings.
2
> [
¡
! Audio Setup] > [CH2 Input] setting.
3
Available for MP4 clips when > [
Æ
" Recording/Media Setup] > [Audio Format (MP4)] is set to [LPCM 16 bit 4CH].
NOTES
NOTES
On the [Audio] status screens (A 199), you can check the audio level adjustment mode and input source for
each of the audio channels.
[Select CH1/
CH2 Input]
1
[Select CH3/
CH4 Input]
2
Audio input selection
switches
[CH2 Input]
2
Recorded audio channels/audio sources
for INPUT 1 for INPUT 2 CH1 CH2 CH3
3
CH4
3
[INPUT
Terminals]
[MIC Terminal] AES/EBU
INPUT 1 terminal (digital audio) MIC terminal (L) MIC terminal (R)
[INPUT
Terminals]
[INPUT
Terminals]
AES/EBU AES/EBU
INPUT 1 terminal (digital audio) INPUT 2 terminal (digital audio)
[INPUT
Terminals]
[INPUT
Terminals]
AES/EBU ANALOG
INPUT 1 terminal (digital audio)
INPUT 2 terminal
[INPUT
Terminals]
[Monaural Mic] AES/EBU
INPUT 1 terminal (digital audio)
Built-in microphone
(mono)
Built-in microphone
(mono)
[INPUT
Terminals]
[MIC Terminal] ANALOG
[INPUT 2] INPUT 1 terminal INPUT 2 terminal MIC terminal (L) MIC terminal (R)
[INPUT
Terminals]
[MIC Terminal] ANALOG
[INPUT 1] INPUT 1 terminal INPUT 1 terminal MIC terminal (L) MIC terminal (R)
[INPUT
Terminals]
[INPUT
Terminals]
ANALOG AES/EBU [INPUT 1] INPUT 1 terminal INPUT 1 terminal INPUT 2 terminal (digital audio)
[INPUT
Terminals]
[INPUT
Terminals]
ANALOG AES/EBU [INPUT 2] INPUT 1 terminal
INPUT 2 terminal (digital audio)
[INPUT
Terminals]
[INPUT
Terminals]
ANALOG ANALOG [INPUT 2] INPUT 1 terminal INPUT 2 terminal INPUT 1 terminal INPUT 2 terminal
[INPUT
Terminals]
[INPUT
Terminals]
ANALOG ANALOG [INPUT 1] INPUT 1 terminal INPUT 1 terminal INPUT 1 terminal INPUT 2 terminal
[INPUT
Terminals]
[Monaural Mic] ANALOG
[INPUT 2] INPUT 1 terminal INPUT 2 terminal
Built-in microphone
(mono)
Built-in microphone
(mono)
[INPUT
Terminals]
[Monaural Mic] ANALOG
[INPUT 1] INPUT 1 terminal INPUT 1 terminal
Built-in microphone
(mono)
Built-in microphone
(mono)
[MIC Terminal]
[INPUT
Terminals]
ANALOG
MIC terminal (L) MIC terminal (R) INPUT 1 terminal INPUT 2 terminal
[MIC Terminal]
[INPUT
Terminals]
AES/EBU
MIC terminal (L) MIC terminal (R) INPUT 2 terminal (digital audio)
[MIC Terminal] [MIC Terminal]
MIC terminal (L) MIC terminal (R) MIC terminal (L) MIC terminal (R)
[MIC Terminal] [Monaural Mic]
MIC terminal (L) MIC terminal (R)
Built-in microphone
(mono)
Built-in microphone
(mono)
[Monaural Mic]
[INPUT
Terminals]
ANALOG
Built-in microphone
(mono)
Built-in microphone
(mono)
INPUT 1 terminal INPUT 2 terminal
[Monaural Mic]
[INPUT
Terminals]
AES/EBU
Built-in microphone
(mono)
Built-in microphone
(mono)
INPUT 2 terminal (digital audio)
[Monaural Mic] [MIC Terminal]
Built-in microphone
(mono)
Built-in microphone
(mono)
MIC terminal (L) MIC terminal (R)
[Monaural Mic] [Monaural Mic]
Built-in microphone
(mono)
Built-in microphone
(mono)
Built-in microphone
(mono)
Built-in microphone
(mono)
Recording Audio
98
Connecting an External Microphone or External Audio Input Source to the Camera
To each of the INPUT terminals you can attach commercially available microphones, digital audio sources (AES/
EBU), or analog line in sources with an XLR connector. To the MIC terminal you can attach commercially
available condenser microphones with their own power supply, and a 3.5 mm stereo mini plug.
Using the supplied microphone holder, you can fix external microphones with a diameter of 19 mm to 20 mm.
Follow the procedure below to attach a microphone (refer also to the following illustration). To connect an
external device to the camera, plug the device’s cable into the desired INPUT terminal ().
1 Loosen the microphone lock screw (), open the
microphone holder and insert the microphone ().
2 Tighten the lock screw and put the microphone cable through the cable
clamp under the microphone holder ().
3 Plug the microphone cable into the desired INPUT terminal () or the MIC terminal ().
Microphone lock screw
MIC terminal
Cable clamp
INPUT 1 terminalINPUT 2 terminal
99
Recording Audio
Setting the Audio Input Type for the INPUT 1/INPUT 2 Terminals
Using the INPUT 1/INPUT 2 terminals, you can record audio independently from a microphone or audio input
source.
On the camera, set the audio-related switches for the INPUT
terminal you wish to use according to the type of audio input you
wish to use.
1 Set the audio input selection switch for the desired INPUT
terminal to AES/EBU (digital audio) or ANALOG (analog
audio).
When the switch is set to AES/EBU, the audio recording level for
that input cannot be adjusted.
2 If you selected analog audio, set the INPUT terminal’s
ANALOG (analog source selection) switch to MIC
(microphone) or LINE (audio device).
To supply a microphone with phantom power, set the switch to
MIC+48V instead. Make sure to connect the microphone first,
before turning the phantom power on. Keep the microphone
connected when turning off the phantom power.
When using the INPUT terminals to record to only one channel, use the INPUT 1 terminal.
IMPORTANT
When connecting an analog microphone or device that does not support phantom power, make sure to set
the corresponding INPUT switch to MIC or LINE, respectively. If you set the switch to MIC+48V, the
microphone or device may be damaged.
Selecting the Audio Format for Clips
When shooting RAW (primary) or MP4 (primary or proxy) clips, you can select the audio format.
1 Open the [Audio Format (RAW)] or [Audio Format (MP4)] submenu.
> [
3
" Recording/Media Setup] > [Audio Format (RAW)] or [Audio Format (MP4)]
2 Select the desired option and then press the joystick.
Options for RAW clips
[LPCM 16 bit 4CH]: The clip is recorded using 4-channel linear PCM with an audio sampling bit depth of
16 bit.
[LPCM 24 bit 4CH]: The clip is recorded using 4-channel linear PCM with an audio sampling bit depth of
24 bit.
Options for MP4 clips
[AAC 16 bit 2CH]: The clip is recorded using 2-channel MPEG-2 AAC-LC with an audio sampling bit depth
of 16 bit. This format is more versatile and allows the clip to be played back on various
devices.
[LPCM 16 bit 4CH]: The clip is recorded using 4-channel linear PCM with an audio sampling bit depth of
16 bit. This format is uncompressed and has higher quality.
Operating modes:
INPUT 1/
INPUT 2
switches
Recording Audio
100
NOTES
NOTES
When shooting XF-AVC (primary or proxy) clips, the audio format is 4-channel linear PCM with an audio
sampling bit depth of 24 bit.
Selecting the Audio Input Source for Audio Channels
You can select the audio input source that will be recorded on CH1/CH2 or CH3/CH4, independently for each
pair of audio channels. For details refer to the
Audio Settings and Recorded Audio Channels
table (A 96).
1 Select the desired pair of audio channels.
> [
¡
! Audio Setup] > [Select CH1/CH2 Input] or [Select CH3/CH4 Input]
2 Select [INPUT Terminals] (external microphone or audio device), [MIC Terminal] (external
microphone) or [Monaural Mic] (built-in microphone) and then press the joystick.
If necessary, repeat steps 1 and 2 to select the audio input source for the other pair of audio channels.
For information on the monaural microphone, see
About the monaural microphone
(A 103).
Recording a Single Analog Audio Input to Two Audio Channels
By default, when using analog audio sources (line in or microphone) connected to the INPUT terminals, each
audio input is recorded to a separate audio channel (INPUT 1 to CH1 and INPUT 2 to CH2).
If necessary (for example, as an audio backup recording), you can record the same analog audio source
connected to the INPUT 1 terminal to both audio channels, CH1 and CH2. In that case, you can adjust the audio
recording levels of each channel independently of each other.
1 Open the [CH2 Input] submenu.
> [
¡
! Audio Setup] > [CH2 Input]
2 Select the desired option and then press the joystick.
Options
[INPUT 2]: Records audio to each channel separately. Audio input into INPUT 1 is recorded to CH1, while
audio input into INPUT 2 is recorded to CH2.
[INPUT 1]: Audio input into INPUT 1 is recorded to both channels. Audio input into INPUT 2 will not be
recorded.
Operating modes:
101
Recording Audio
Adjusting the Audio Recording Level
When a channel is set to an analog audio input, you can select the automatic audio recording level adjustment or
adjust the audio level manually, independently for each channel. When a channel is set to a digital audio source
or the built-in monaural microphone, the audio recording level cannot be adjusted.
Automatic Audio Level Adjustment for CH1 or CH2
Set the audio level switch of the desired channel to A (automatic) to
let the camera automatically adjust that channel’s audio level.
Manual Audio Level Adjustment for CH1 or CH2
You can set the audio level for each channel manually from –
to
+18 dB.
1 Set the audio level switch of the desired channel to M (manual).
2 Turn the corresponding audio level dial to adjust the audio level.
For reference, the 0 corresponds to –
, 5 corresponds to 0 dB,
and 10 corresponds to +18 dB.
As a guideline, adjust the audio recording level so that the audio
level meter on the screen will go to the right of the –18 dB mark
(one mark right of the –20 dB mark) only occasionally.
Closing the protective cover will prevent the audio controls from
being changed inadvertently.
Operating modes:
CH1/CH2
audio level
switches
CH1/CH2
audio level
switches
CH1/CH2
audio level
dials
Recording Audio
102
Audio Level Adjustment for CH3 or CH4
To adjust audio levels for CH3 and CH4, set the recording format to RAW or XF-AVC, or set it to MP4 and then
set > [
3
" Recording/Media Setup] >
[Audio Format (MP4)] to [LPCM 16 bit 4CH] in advance.
1 Open the [Audio Rec Level CH3], [Audio Rec Level CH4] or [Audio Rec Level CH3/CH4] submenu.
> [
¡
" Audio Setup] > [Audio Rec Level CH3], [Audio Rec Level CH4] or [Audio Rec Level CH3/
CH4]
2 Select [Automatic] or [Manual] and then press the joystick.
If you selected [Automatic], the rest of the procedure is not necessary. If you selected [Manual], continue the
procedure to set the audio recording level.
3 Open the [CH3 Level], [CH4 Level] or [CH3/CH4 Level] submenu.
> [
¡
" Audio Setup] > [CH3 Level], [CH4 Level] or [CH3/CH4 Level]
4 Push the joystick up/down to set the audio recording level and then press the joystick.
For reference, 0 corresponds to –, 50 corresponds to 0 dB, and 100 corresponds to +18 dB.
As a guideline, adjust the audio recording level so that the audio level meter on the screen will go to the right
of the –18 dB mark (one mark right of the –20 dB mark) only occasionally.
NOTES
NOTES
If at least one of the channels is set to the INPUT terminals, an analog audio source and manual audio level
adjustment, you can activate the audio limiter to prevent audio distortions. When activated, the audio limiter
will limit the amplitude of audio input signals when they start to distort. Use the > [
¡
# Audio
Setup] > [INPUT 1&2 Limiter] setting.
We recommend using headphones when adjusting the audio level. If the input level is too high, audio may
become distorted even if the audio level indicator shows an appropriate level.
If you set an assignable button to [Audio Level Indicator] (A 125), you can press the button to turn the
onscreen audio level indicator on and off.
The audio recording level of the monaural microphone is set to automatic and cannot be changed.
Advanced Audio Input Settings
Adjusting the Microphone’s Sensitivity (INPUT Terminals)
When the ANALOG switch for INPUT 1 or INPUT 2 is set to MIC or MIC+48V and the INPUT switch of the
terminal is set to ANALOG, you can select the external microphone’s sensitivity.
1 Open the desired INPUT terminal’s sensitivity submenu.
> [
¡
# Audio Setup] > [INPUT 1 Mic Trimming] or [INPUT 2 Mic Trimming]
Linking the audio level adjustment of CH1/CH2 or CH3/CH4
When both CH1 and CH2, or CH3 and CH4, are set to the INPUT terminals or MIC terminal and to the
same type of analog audio source (external line input or external microphone), you can use the >
[
¡
! Audio Setup] > [CH1/CH2 ALC Link] or [CH3/CH4 ALC Link] setting to link the audio level
adjustment of both channels.
When CH1 and CH2 are linked, you can use the CH1 audio level switch and audio level dial to affect both
CH1 and CH2. When CH3 and CH4 are linked, you can use the [Audio Rec Level CH3/CH4] and [CH3/CH4
Level] settings to affect both CH3 and CH4.
Operating modes:
103
Recording Audio
2 Select the desired level and then press the joystick.
You can select one of 5 sensitivity levels from –12 dB to +12 dB.
Activating the Microphone’s Attenuator (INPUT Terminals)
When the INPUT 1 or INPUT 2 switch is set to MIC or MIC+48V and the INPUT switch of the terminal is set to
ANALOG, you can activate the external microphone’s attenuator (20 dB).
1 Open the desired INPUT terminal’s microphone attenuator submenu.
> [
¡
# Audio Setup] > [INPUT 1 Mic Att.] or [INPUT 2 Mic Att.]
2 Select [On] and then press the joystick.
Activating the Microphone’s Attenuator (MIC Terminal)
If the audio level is too high and the sound sounds distorted, activate the microphone attenuator (20 dB). To do
so, make sure > [
¡
! Audio Setup] > [Select CH1/CH2 Input] or [Select CH3/CH4 Input] is set to
[MIC Terminal].
1 Open the [MIC Att.] submenu.
> [
¡
# Audio Setup] > [MIC Att.]
2 Select [On] and then press the joystick.
Activating the Low-Cut Filter (MIC Terminal)
You can activate the low-cut filter, for example to reduce the sound of wind in the background when recording
outdoors. To do so, make sure > [
¡
! Audio Setup] > [Select CH1/CH2 Input] or [Select CH3/
CH4 Input] is set to [MIC Terminal].
1 Open the [MIC Low Cut] submenu.
> [
¡
# Audio Setup] > [MIC Low Cut]
2 Select [On] and then press joystick.
When you activate the low-cut filter, some low-frequency sounds may be suppressed along with the sound
of wind.
About the monaural microphone
The monaural microphone allows you to add comments while shooting, which
can be synchronized to the audio and video during editing. The audio
recording level of the monaural microphone is adjusted automatically and
cannot be changed. To use the monaural microphone, set >
[
¡
! Audio Setup] > [Select CH1/CH2 Input] or [Select CH3/CH4 Input]
to [Monaural Mic].
Monaural
microphone
Recording Audio
104
Monitoring the Audio with Headphones
Connect headphones with a 3.5 mm stereo mini-plug to the
×
(headphone)
terminal to monitor the recorded audio.
NOTES
NOTES
You can adjust the headphone volume with the > [
¡
$ Audio
Setup]
1
> [Headphone Volume] setting. If you set an assignable button to
[Headphones +] or [Headphones –] (A 125), you can press the button to
adjust the headphone volume without using the menu.
1
For mode, page !.
×
(headphone) terminal
105
Colors Bars/Audio Reference Signal
Colors Bars/Audio Reference Signal
You can have the camera generate color bars and a 1 kHz audio reference signal and output them from the
VIDEO terminal, viewfinder
1
, SDI terminal, HDMI OUT terminal and
×
(headphone) terminal
2
.
1
k
only.
2
Audio reference signal only.
Color Bars
The camera offers 3 types of color bars.
1 Open the [Color Bars] submenu to activate the color bars.
> [
v
& Camera Setup] > [Color Bars]
2 Select [On] and then press the joystick.
The selected color bars appear on the screen.
Turning off the camera or changing the operating mode to mode will deactivate the color bars.
3 Open the [Color Bar Type] submenu.
> [
v
& Camera Setup] > [Color Bar Type]
4 Select the type of color bars and then press the joystick.
NOTES
NOTES
If you set an assignable button to [Color Bars] (A 125), you can press the button to turn the color bars on/off.
You cannot change the type of color bars while recording or while pre-recording mode is activated.
While color bars are displayed, peaking, magnification and waveform monitor are not available.
Audio Reference Signal
The camera can output a 1 kHz audio reference signal with the color bars.
1 Open the [1 kHz Tone] submenu.
> [
¡
$ Audio Setup] > [1 kHz Tone]
2 Select the desired level and then press the joystick.
Available levels are –12 dB, –18 dB and –20 dB.
Select [Off] to turn off the signal.
The signal is output at the selected level.
Operating modes:
Waveform Monitor
106
Waveform Monitor
The camera can display a simplified waveform monitor. You can select one of 6 types of monitors and also adjust
the waveform amplification.
Displaying the Waveform Monitor
Press the WFM button.
The waveform monitor window will appear on the right of the
screen.
Alternatively, you can display the video scopes using the
> [
A
%
Assistance Functions]* >
[WFM: VF+VIDEO Output] (
l
[WFM: VIDEO Output]) or
[WFM: SDI Output] setting.
* In mode, [
A
! Assistance Functions].
Configuring the Waveform Monitor
1 Open the [WFM Type] submenu.
> [
A
% Assistance Functions]* > [WFM Type]
2 Select the desired option and then press the joystick.
If you selected [Select Line], continue the procedure to set the Y coordinate of the line you wish to display.
Otherwise, skip to step 6 to change the gain.
3 To select the line’s Y coordinate, open the [WFM Select Line] submenu.
> [
A
% Assistance Functions]* > [WFM Select Line]
4 Push the joystick up/down to select the first digit of the Y coordinate and then press the joystick to
move to the next.
Change the rest of the digits in the same way to select the Y coordinate of the desired line.
When the number of horizontal lines (vertical component) of the resolution used is 1080, you can select a
value between 0 and 1079 (1-line increments); when the vertical resolution is 2160, you can select a value
between 0 and 2158 (2-line increments).
5 Select [Set] and then press the joystick.
6 Open the [WFM Gain] submenu.
> [
A
% Assistance Functions]* > [WFM Gain]
7 Select the desired amplification ratio and then press the joystick.
If you selected [1x], the rest of the procedure is not necessary. If you selected [2x], the display range of the
waveform monitor’s Y axis will be reduced by half. Continue the procedure to select the minimum luminance
value (in %) shown on the Y axis.
* In mode, [
A
! Assistance Functions].
Operating modes:
107
Waveform Monitor
8 Open the [WFM Y Position] submenu.
> [
A
% Assistance Functions]* > [WFM Y Position]
9 Select the desired percentage and then press the joystick.
* In mode, [
A
! Assistance Functions].
Options
[Line]: Sets the waveform monitor to line display mode.
[Line+Spot]: The waveform of the area in the red frame is displayed in red on top of the [Line] mode
waveform.
[Select Line]: The selected horizontal line will be displayed along with its waveform.
[Field]: Sets the waveform monitor to field display mode.
[RGB]: Functions like an RGB parade scope.
[YPbPr]: Functions like a YPbPr parade scope.
NOTES
NOTES
You can select whether to display the waveform monitor on the camera viewfinder (
k
only) and from the
VIDEO terminal, or from the SDI terminal with the > [
A
% Assistance Functions] > [WFM:
VF+VIDEO Output] (
l
[WFM: VIDEO Output]) or [WFM: SDI Output] settings.
The waveform monitor will not be affected even if a LUT is applied to the clip’s video.
The waveform monitor cannot be displayed while magnification is activated.
If the [Knee] settings in the custom picture file (A 134) were changed, a horizontal line will appear on the
waveform monitor indicating the luminance (Y) level corresponding to the knee point.
About the waveform monitor display:
To display Canon Log 3 or Canon Log, set > [ ! Custom Picture/HDR] > [HDR/LUT] to
[HDR: Off], the other settings in the same screen to an option other than [LUT: Off], and then one of the
following:
- > [ ! Custom Picture/HDR] > [Preset] to [Canon Log 3] or [Canon Log].
- > [ ! Custom Picture/HDR] > [Gamma] to [Canon Log 3] or [Canon Log].
To display HDR (HLG) or HDR (PQ), set > [ ! Custom Picture/HDR] > [HDR/LUT] to
[HDR: HLG] or [HDR: PQ].
Adding Marks to Recordings
108
Adding Marks to Recordings
While recording XF-AVC clips, you can flag an important shot by adding a “shot mark” (!). After recording, you
can also add an OK mark ($) or check mark (%) to the entire clip to flag clips you want to set apart. You can
also perform this function remotely using Browser Remote on a connected Wi-Fi device (A 170).
When the camera is in mode, you can add or delete shot marks (A 147).
Adding a Shot Mark while Recording
To add a shot mark to a clip while recording, you must first set an assignable button to [Add Shot Mark].
1 Set an assignable button to [Add Shot Mark] (A 125).
2 While you are recording, press the assignable button at the beginning of the shot you wish to mark.
A message indicating the shot mark will appear and the selected shot mark will be added to the current
frame of the clip.
NOTES
NOTES
Up to 100 shot marks can be added to a single clip.
There may be up to a 0.5 second delay from when you press the button to when the camera adds the shot
mark.
When a clip contains a shot mark, ! will appear next to the clip’s thumbnail in the playback index screen.
Shot marks cannot be added in the following cases:
- During pre-recording mode before pressing the REC button to record.
- During interval recording or frame recording mode.
Adding an $ Mark or % Mark after Recording
After recording an XF-AVC clip, you can add an OK mark ($) or check mark (%) to the clip to flag it and set it
apart. Furthermore, you can use the $ mark to protect important clips, as clips with an $ mark cannot be
deleted.
To add an $ mark or % mark, you must first set in advance an assignable button to [Add $ Mark] or [Add %
Mark].
1 Set an assignable button to [Add $ Mark] or [Add % Mark] (A 125).
To add both types of clip marks (to different clips), set one assignable button to [Add $ Mark] and another
assignable button to [Add % Mark].
2 After recording, press the assignable button.
A message indicating the clip mark will appear and the selected clip mark will be added to the clip just
recorded.
NOTES
NOTES
A clip cannot have both an $ mark and a % mark at the same time.
Operating modes:
109
Using Metadata
Using Metadata
The camera automatically adds metadata to XF-AVC clips while they are being recorded. You can use Canon XF
Utility to check and search for specific metadata. You can also create and transfer a user memo remotely using
Browser Remote on a connected Wi-Fi device (A 170).
Metadata components
1
User memo files need to be created using the software and saved on an SD card in advance.
2
Only when an optional GP-E2 GPS Receiver is attached to the camera. While recording, GPS information is recorded
automatically by the camera (A 111).
3
GPS information can only be added to clips already recorded.
4
Recording data is logged automatically by the camera.
Setting a User Memo Created with Canon XF Utility
Before you can add a user memo, you must first install Canon XF Utility (A 158). Next, create the user memo
and then save it to an SD card. Once you insert the SD card in the camera and select the user memo, it will be
added to clips you record.
1 Use Canon XF Utility to save a user memo to an SD card.
For details, refer to
Managing User Memo Profiles
in the Canon XF Utility Instruction Manual.
2 Insert the SD card into SD card slot B.
3 Open the metadata [Setting] submenu.
> [
3
$ Recording/Media Setup] > [Metadata] > [Setting]
4 Select [SD Card] and then press the joystick.
5 Open the [User Memo] submenu.
> [
3
$ Recording/Media Setup] > [Metadata] > [User Memo]
6 Select the file name of the desired user memo and then press the joystick.
•The Q icon appears on the left of the screen.
Select [Off] to record clips without a user memo.
NOTES
NOTES
After you set a user memo, do not remove the SD card while you are recording. If the SD card is removed, the
user memo will not be added to the clip.
You must set the user memo before you start recording for it to be added to the clip. You cannot change the user
memo already added to a clip using the camera but you can do so with Canon XF Utility.
When the optional GP-E2 GPS Receiver is attached to the camera and the GPS function is activated, the user
memo information will not be recorded, even if you have selected a user memo file from the SD card.
Metadata
Entering content Checking content
Camera Canon XF Utility Browser Remote Canon XF Utility
User Memo: clip title, creator, location and description.
x
Ü
1
Ü Ü
GPS information: altitude, latitude and longitude. Ü
2
Ü
3
Ü Ü
Information about the recording: scene and take. Ü
x
x
Ü
Information about camera settings: shutter speed, ISO
speed/gain value, etc.
4
x
Ü
Unique Material Identifiers (UMID): country, organization
and user codes based on the SMPTE standard.
Ü
x
(A 188)
x
Operating modes:
Using Metadata
110
Entering Information About the Recording
You can enter scene and take information to help identify the recording later on.
1 Open the [Scene] or [Take] submenu.
> [
3
$ Recording/Media Setup] > [Metadata] > [Scene] or [Take]
2 Select [Change] and then press the joystick.
Enter the desired text using the keyboard screen (A 35).
To clear the scene/take information, select [Reset] instead.
3 Select [OK] and then press the joystick.
111
Recording GPS Information (Geotagging)
Recording GPS Information (Geotagging)
When the optional GP-E2 GPS Receiver is connected to the camera’s USB terminal, the camera will
automatically record the GPS information (longitude, latitude and altitude) to clips and photos you record. Later,
the GPS information can be used to organize and search clips using Canon XF Utility (A 158). In mode,
you can check if a clip contains GPS information on the [Clip Info] screen (A 145).
For details about attaching and configuring the receiver, refer to the GP-E2’s instruction manual.
Connecting the GPS Receiver
Turn off the camera and the receiver. Connect the receiver to the camera’s USB terminal using the USB cable*.
While recording, place the receiver in the carrying case* and attach it to the camera’s grip belt or carry it on your
person. For details about connecting and using the receiver, refer to the GP-E2 Instruction Manual.
* Supplied with the optional GP-E2 GPS Receiver.
IMPORTANT
In certain countries/regions, the use of GPS may be restricted. Be sure to use the GPS receiver in accordance
with local laws and regulations of the country/region where the receiver is used. Be particularly careful when
traveling outside of your home country.
Be careful about using the GPS receiver in places where the use of electronic devices is restricted.
The recorded GPS information may contain data that can lead others to locate or identify you. Be careful when
sharing geotagged recordings with others or when uploading them to the Web.
Do not leave the GPS receiver near strong electromagnetic fields such as near powerful magnets and motors.
NOTES
NOTES
On the [GPS Information Display] status screen (A 205), you can check the current GPS information and
satellite signal strength.
You can use the [
¢
% Monitoring Setup] > [Displayed Units] setting to change the units shown on the
screen between meters and feet.
GPS signal reception may take some time after replacing the battery pack or when first turning on the camera.
Do not place the unit cable or cable connected to the SDI or HDMI OUT terminal near a GPS receiver as doing
so may interfere with the GPS information.
The GPS information recorded with clips corresponds to the location at the start of the recording.
USB terminal
Adjusting the Date/Time Automatically According to GPS Position
You can set > [
B
% System Setup] > [GPS Auto Time] to [On], to have the camera automatically
adjust its date and time settings according to the information received from the GPS signal. The date and time
will be updated automatically the first time a correct GPS signal is acquired after turning on the camera.
When > [
B
% System Setup] > [GPS Auto Time] is set to [On], the > [
B
! System
Setup] > [Time Zone] and [Date/Time] submenus will not be available.
Reviewing a Recording
112
Reviewing a Recording
If you set an assignable button to [Review Recording] in advance, you can review all or part of the last clip
recorded even with the camera set to mode.
1 Set an assignable button to [Review Recording] in advance (A 125).
2 Open the [Review Recording] submenu to set the review length.
> [
B
% System Setup] > [Review Recording]
3 Select the desired option and then press the joystick.
4 After you finish recording a clip, press the assignable button.
The last clip that was recorded is played back for the selected duration. [
Ð
REVIEW] appears at the top of
the screen.
You can push the joystick left/right during the playback to skip 10 seconds backward or forward,
respectively. When there are less than 10 seconds from the start of the clip, pushing the joystick left will
start playing back the clip from the beginning. When there are less than 4 seconds from the end of the clip,
pushing the joystick right will have no effect.
Audio will be output from the
×
(headphone) terminal, HDMI OUT terminal and SDI terminal.
Press the assignable button again or the CANCEL button to stop reviewing the clip and return the camera to
record standby mode.
After the clip finishes playing back, the camera returns to record standby mode.
Options
[Entire Clip]: Allows you to review the entire clip.
[Last 4 sec]: Allows you to review just the last 4 seconds of the clip.
NOTES
NOTES
If the camera switched SD cards during a recording, the camera will play back the clip on the SD card most
recently recorded on.
Operating modes:
113
Simultaneous Recording of Proxy Clips
Simultaneous Recording of Proxy Clips
In addition to a primary clip recorded in RAW on a CFast card, you can simultaneously record the same scene as
a proxy clip (in MP4 or XF-AVC format) on an SD card. Because proxy clips are relatively smaller files, they are
suitable for offline editing.
1 Set the main recording format to RAW (A 64).
2 Open the proxy recording [Sub Rec Format] submenu.
> [
Æ
! Recording/Media Setup]
>
[Sub Rec Format]
3 If necessary, select the audio format (A 99).
4 Select [MP4 (SD Card)] or [XF-AVC (SD Card)] and then press the joystick.
5 Press the REC button to start and stop recording.
A proxy clip will be recorded on the SD card at the same time the primary clip is recorded on the CFast card.
IMPORTANT
Observe the following precautions while an access indicator is illuminated in red. Failure to do so may result in
permanent data loss.
- Do not open the card slot cover of the card being accessed and do not remove the card.
- Do not disconnect the power source or turn off the camera.
NOTES
NOTES
If the recording of the primary clip stops during simultaneous recording, recording of the proxy clip will stop as well.
When an SDHC card is used to record proxy clips, the video (stream) file in a proxy clip will be split
approximately every 4 GB for clips with long recording times. Still, playback on the camera will be continuous.
During HDR output (A 154), the BT.709 LUT (A 155) will be applied automatically to the proxy clip. The
dynamic range will be 800% maximum when [HDR/LUT] is set to [HDR: PQ]; it will be 425% maximum when
[HDR/LUT] is set to [HDR: HLG].
If proxy clip recording is activated but no CFast card is inserted in the camera, the proxy clip will not be
recorded.
Operating modes:
Video and audio configuration of proxy clips
The recorded proxy clip has the following video configuration. The frame rate is the same as that used for the
primary clip. The audio configuration depends on the proxy clip’s audio recording format (A 99)
Resolution and color sampling: 2K (2048x1080), YCbCr 4:2:0, 8 bit
Bit rate: 35 Mbps (for MP4 proxy clips) or 45 Mbps (for XF-AVC proxy clips)
Special Recording Modes
114
Special Recording Modes
The camera features the following special recording modes.
Slow motion recording: This mode allows you to change the shooting frame rate to achieve a slow motion effect
during playback.
Pre-recording: The camera will start recording a few seconds before you press the REC button. This is especially
useful when it is difficult to predict when to start recording.
Frame recording: The camera will record one frame every time you press the REC button. This mode is suitable
for recording stop motion animation.
Interval recording: The camera will automatically record one frame at a pre-defined interval. This mode is suitable
for recording subjects with little movement, such as natural surroundings or plants.
Continuous recording: The camera will keep recording continuously on SD card B until you stop it so you do not
miss any shooting opportunities. This mode is available only for MP4 clips.
Slow Motion Recording Mode
The camera can record using a progressive frame rate (shooting frame rate) that is different from the playback
frame rate. Recording a clip at a higher frame rate than the [Frame Rate] setting will result in a slow motion effect
during playback (up to 1/5 of the original speed). The maximum recording length of a clip depends on the frame
rate but the playback time cannot exceed approximately 6 hours.
Sound is not recorded when slow motion recording is activated.
Available shooting frame rates and maximum recording time
* When the frame rate is 119.88P, it will appear on the screen as 120.
1 Open the [Recording Mode] submenu.
[
3
! Recording/Media Setup] > [Recording Mode]
2 Select [Slow Motion Recording] and then press the joystick.
[SLOW STBY] appears at the top of the screen. Also, the shooting frame rate appears at the top of the
screen next to the frame rate setting (the playback frame rate).
Operating modes:
Video configuration
Shooting frame rate*
Approx. maximum recording time
for a single clip
Frame rate Resolution Color sampling
59.94P
1920x1080 YCbCr 4:2:0, 8 bit
119.88P
3 hr.
29.97P 1 hr. 30 min.
23.98P 1 hr. 12 min.
24.00P 120P 1 hr. 12 min.
50.00P
100P
3 hr.
25.00P 1 hr. 30 min.
Shooting frame rate (fps)
[Frame Rate] setting (playback frame rate)
115
Special Recording Modes
3 Press the REC button to begin recording.
The tally lamp illuminates.
[SLOW STBY] changes to [
Ü
SLOW REC] while recording.
4 Press the REC button again to stop recording.
The clip is recorded at the selected frame rate.
The tally lamp goes out and [SLOW STBY] appears at the top of the screen.
5 When you have finished recording, turn off the special recording mode.
Repeat steps 1 and 2 selecting [Normal Recording] instead.
NOTES
NOTES
You can use only one special recording mode at a time.
The shooting frame rate cannot be changed while recording.
The time code signal will not be output from the SDI or HDMI OUT terminal.
If you change the main recording format or system frequency, slow motion recording mode will be canceled
and the shooting frame rate will be reset to its default value.
About the time code during slow motion recording mode:
- The time code mode can be set to [Regen.], or to [Preset] with [Rec Run] running mode.
- If the time code running mode was set to [Free Run], the time code running mode will be changed
automatically to [Rec Run] when slow motion recording is activated.
- When the special recording mode is deactivated, the time code running mode will return to its previous setting.
Pre-recording Mode
When pre-recording mode is activated, the camera starts recording continuously into a temporary memory
(approx. 3 seconds) so when you press the REC button, the clip will contain also a few seconds of video and
audio recorded before you pressed the button.
1 Open the [Recording Mode] submenu.
> [
Æ
! Recording/Media Setup] > [Recording Mode]
2 Select [Pre-Recording] and then press the joystick.
[PRE REC STBY] appears at the top of the screen.
3 Press the REC button to begin recording.
The tally lamp illuminates.
[PRE REC STBY] changes to [
Ü
PRE REC] while recording.
4 Press the REC button again to stop recording.
The camera records the clip, including a few seconds of video and audio recorded before the REC button
was pressed.
The tally lamp goes out and [PRE REC STBY] appears at the top of the screen.
5 When you have finished recording, turn off the special recording mode.
Repeat steps 1 and 2 selecting [Normal Recording] instead.
NOTES
NOTES
You can use only one special recording mode at a time.
While pre-recording mode is activated, the audio format for MP4 clips cannot be changed.
If you change the main recording format or system frequency, pre-recording mode will be canceled.
Operating modes:
Special Recording Modes
116
About the time code during pre-recording mode:
- The time code of the clip will start a few seconds before the REC button was pressed.
- The time code will be recorded with the running mode set to [Free Run].
- If the time code mode was set to [Regen.], or to [Preset] with [Rec Run] running mode, the time code
running mode will be changed automatically to [Free Run] when pre-recording is activated.
- When the special recording mode is deactivated, the time code running mode will return to its previous
setting.
Frame Recording Mode
We recommend operating the camera remotely or stabilizing the camera, for example, on a tripod. Sound is not
recorded in this mode.
Activating and Configuring
1 Open the [Recording Mode] submenu.
> [
Æ
! Recording/Media Setup] > [Recording Mode]
2 Select [Frame Recording] and then press the joystick.
[FRM STBY] appears at the top of the screen (with [FRM] flashing).
Recording
1 Press the REC button to begin recording.
The camera automatically records one frame.
The tally lamp illuminates.
[FRM STBY] changes to [
Ü
FRM REC] while recording frames and [
Ü
FRM STBY] when frames are not
being recorded.
Repeat until you finish recording.
2 When you have finished recording, turn off the special recording mode.
Repeat steps 1 and 2 of the previous procedure selecting [Normal Recording] instead.
Frame recording mode ends and all of the recorded frames are joined together into one clip.
The tally lamp goes out and [STBY] appears at the top of the screen.
NOTES
NOTES
You can use only one special recording mode at a time.
Some frames at the point the recording was stopped may be recorded and added to the end of the clip.
If you change the main recording format or system frequency, frame recording mode will be canceled.
About the time code during frame recording mode:
- The time code mode can be set to [Regen.], or to [Preset] with [Rec Run] running mode.
- If the time code running mode was set to [Free Run], the time code running mode will be changed
automatically to [Rec Run] when interval recording is activated.
- When the special recording mode is deactivated, the time code running mode will return to its previous
setting.
- The time code signal will not be output from the SDI terminal or HDMI OUT terminal.
Operating modes:
117
Special Recording Modes
Interval Recording Mode
Set the interval in advance. At each interval, the camera will record one frame. Sound is not recorded in this
mode.
Activating and Configuring
1 Open the [Recording Mode] submenu.
> [
Æ
! Recording/Media Setup] > [Recording Mode]
2 Select [Interval Recording] and then press the joystick.
[INT STBY] appears at the top of the screen (with [INT] flashing).
3 Open the [Recording Interval] submenu.
> [
Æ
! Recording/Media Setup] > [Recording Interval]
4 Select the desired interval and then press the joystick.
You can select one of 7 interval settings from 1 second to 10 minutes.
Recording
1 Press the REC button to begin recording.
The camera automatically records one frame at the specified interval.
The tally lamp illuminates.
[INT STBY] changes to [
Ü
INT REC] while recording frames, and [
Ü
INT] and a countdown until the next
recording between recordings.
2 Press the REC button again to stop recording.
All of the recorded frames are joined together into one clip.
The tally lamp goes out and [INT STBY] appears at the top of the screen (with [INT] flashing).
3 When you have finished recording, turn off the special recording mode.
Repeat steps 1 and 2 of the previous procedure selecting [Normal Recording] instead.
NOTES
NOTES
You can use only one special recording mode at a time.
The interval cannot be changed while recording.
Some frames at the point the recording was stopped may be recorded and added to the end of the clip.
If you change the main recording format or system frequency, interval recording mode will be canceled.
About the time code during interval recording mode:
- The time code mode can be set to [Regen.], or to [Preset] with [Rec Run] running mode.
- If the time code running mode was set to [Free Run], the time code running mode will be changed
automatically to [Rec Run] when interval recording is activated.
- When the special recording mode is deactivated, the time code running mode will return to its previous
setting.
- The time code signal will not be output from the SDI terminal or HDMI OUT terminal.
Operating modes:
Special Recording Modes
118
Continuous Recording
Once the continuous recording starts, the camcorder will keep recording continuously until you access the menu
to stop it. This will create a backup recording to make sure you do not miss any shooting opportunities. In this
mode, video and audio are recorded on both cards.
Use the menu to start/stop the continuous recording. While the continuous clip is being recorded on SD card B,
you can use the cameras REC button to record ‘normal’ (non-continuous) clips as usual on SD card A. The
configuration of the continuous recording on SD card B is as follows.
Resolution: 1920x1080
Video format: MP4
Audio format: 4-channel linear PCM, 16 bit
* When continuous recording mode is activated and both cards are in recording standby, you can also press the REC button to
start recording on both cards.
Activating
1 Set the main recording format to [MP4 (SD Card)] (
A
64).
2 Open the [Recording Mode] submenu.
> [
Æ
! Recording/Media Setup] > [Recording Mode]
3 Select [Continuous Recording] and then press the joystick.
The continuous recording mode is activated and [CONT STBY
'7
] appears at the top of the screen. The
normal recording indicator changes to [STBY
'6
].
Recording
1 Open the [Continuous Recording] submenu.
> [
Æ
! Recording/Media Setup] > [Continuous Recording]
2 Select [REC] and then press the joystick.
The tally lamp illuminates and continuous recording starts on SD card B. [CONT STBY
'7
] changes to
[
Ü
CONT REC
'7
].
3 While recording continues on SD card B, you can use the REC button to record normal (non-continuous)
recordings on SD card A.
Press the REC button to start recording on SD card A. [STBY
'6
] changes to [REC
'6
]. Press the REC
button again to stop recording only on SD card A.
Alternatively, when both SD cards are in recording standby, you can press the REC button to begin
recording on both cards.
Operating modes:
SD card B
Set [Continuous
Recording] to [REC]
SD card A
Menu operation: Set [Continuous
Recording] to [STBY]
Continuous recording
Normal recording Normal recording
B only starts
A starts
Press the
REC button*
Press the
REC button
Press the
REC button
A only
stops
A only
starts
Recording stops on
both cards
REC button operation:
119
Special Recording Modes
4 To stop the continuous recording, open the [Continuous Recording] submenu.
> [
Æ
! Recording/Media Setup] > [Continuous Recording]
5 Select [STBY] and then press the joystick.
The tally lamp goes out and recording stops on both SD cards. [
Ü
CONT REC
'7
] and [REC
'6
] change
to [CONT STBY
'7
] and [STBY
'6
], respectively.
6 When you have finished recording, turn off the special recording mode.
> [
Æ
! Recording/Media Setup] > [Recording Mode] > [Normal Recording]
Selecting a different special recording mode will also deactivate the continuous recording mode.
NOTES
NOTES
You can use only one special recording mode at a time.
When continuous recording mode is activated, if recording on SD card B (continuous recording) is not
available, normal recording on SD card A will not be possible either.
When continuous recording mode is activated, recording on SD card B (continuous recording) will continue
even in the following cases.
- SD card A becomes full.
- SD card A is removed from the camera.
When continuous recording mode is activated, the > [
Æ
" Recording/Media Setup] >
[Resolution/Color Sampling] and [Audio Format (MP4)] settings cannot be changed.
If you change the main recording format or system frequency, continuous recording mode will be canceled.
About the time code during continuous recording mode: When the time code mode is set to [Regen.], only the time
codes on SD card B will be read out.
Taking Photos
120
Taking Photos
Photos are saved onto SD card B and their size depends on the video configuration currently in use.
1 Set an assignable button to [Photo] (A 125).
2 When the camera is in record standby mode, press the assignable button to take a photo.
7
and the number of available photos appear on the upper right of the screen.
•The SD CARD
3
access indicator will illuminate in red as the photo is being recorded.
IMPORTANT
Observe the following precautions while the SD CARD
3
access indicator is illuminated in red. Failure to do
so may result in permanent data loss.
- Do not disconnect the power source or turn off the camera.
- Do not remove the SD card.
NOTES
NOTES
Photos cannot be taken during pre-recording mode.
You cannot take photos while using Browser Remote.
If the LOCK switch on the SD card is set to prevent writing, you will not be able to record photos or grab
frames. Change the position of the LOCK switch in advance.
Resolution currently in use Photo size Approximate file size per image
4096x2160 2048x1080 930 KB
3840x2160 3840x2160 3,080 KB
1920x1080 1920x1080 880 KB
Operating modes:
121
Photo Playback
Photo Playback
You can view the photos that you took with the camera. Photos can be played back only from SD card B.
Displaying the [Photos] Index Screen
Display the [Photos] index screen to view photos.
1 Set the
Q
switch to MEDIA.
The camera switches to mode and the clip index
screen appears.
2 Press the INDEX button.
The index screen selection menu appears.
3 Select [Photo Index] and then press the joystick.
The [Photos] index screen appears.
Viewing Photos
1 Move the orange selection frame to the desired photo.
2 Press the
Ò
button to view the photo.
The photo playback screen appears and the selected photo is
displayed.
Push the joystick left/right to switch to the previous/next
photo.
Press the DISP button to hide/show the onscreen displays.
Press the
Ñ
button to return to the [Photos] index screen.
IMPORTANT
Observe the following precautions while the SD card access indicator is illuminated in red. Failure to do so may
result in permanent data loss.
- Do not disconnect the power source or turn off the camera.
- Do not remove the SD card.
NOTES
NOTES
The following photos may not be displayed correctly.
- Photos not recorded with this camera.
- Image files that were created, edited or renamed using a computer.
Operating modes:
Deleting Photos
122
Deleting Photos
You can delete a photo you no longer need. Photos can be deleted one at a time from the photo playback
screen.
The basic operation of the photo menu is identical to that of the clip menu (A 144).
1 Select the photo you wish to delete.
Display the desired photo (A 121) or open the [Photos] index screen and move the orange selection frame
to the desired photo.
2 Press the joystick to open the photo menu.
3 Select [Delete] and then press the joystick.
The screen prompts you to confirm the operation.
4 Select [OK] and then press the joystick.
Select [Cancel] instead to cancel the operation.
The selected photo is deleted.
5 When the confirmation message appears, press the joystick.
IMPORTANT
Be careful when deleting photos. Deleted photos cannot be recovered.
Operating modes:
123
Using the Optional RC-V100 Remote Controller
Using the Optional RC-V100 Remote Controller
You can connect the optional RC-V100 Remote Controller to the camera’s REMOTE terminal in order to control
the camera (including advanced recording functions) from a distance. The remote controller lets you turn the
camera on, navigate the menus and remotely control the aperture and shutter speed, change picture-related
settings like the knee and sharpness, and more.
Use the cable supplied with the remote controller to connect it to the camera. For details on how to connect and
use the remote controller, refer to its instruction manual.
1 Turn off the camera and connect the optional RC-V100 Remote Controller to the camera.
2 Turn on the camera and open the [REMOTE Term.] submenu.
> [
B
! System Setup] > [REMOTE Term.]
3 Select [RC-V100 (REMOTE A)] and then press SET.
Options
[RC-V100 (REMOTE A)]: Select this option to use the optional RC-V100 Remote Controller.
[Standard]: Select this option to use commercially available remote controls.
NOTES
NOTES
The AGC button, AUTO KNEE button and AF button on the remote controller will not operate the camera.
The AUTO IRIS button on the remote controller will operate the camera only when a compatible EF lens
(A 229) is attached to the camera.
The ZOOM dial on the remote controller can operate the lens only when a compatible EF Cinema lens
(A 229) is attached to the camera.
Adjusting picture-related settings with the remote controller can be performed only when the detailed settings
were activated ( > [ ! Custom Picture/HDR] > [Activate Other Settings] is set to [On], A 129).
Operating modes:
Remote cable
(supplied with the
RC-V100)
To the RC-V100’s
REMOTE A terminal
Using the Optional RC-V100 Remote Controller
124
4
125
Customization
Assignable Buttons
The camera offers a number of buttons to which you can assign various functions (assignable buttons). Assign
often-used functions to the buttons you find most convenient, to personalize the camera to your needs and
preferences.
You can find 11 assignable buttons on the cameras body, 2 assignable buttons on the LCD monitor
1
and one
assignable button on the camera grip
1
. The optional EVF-V70 Electronic Viewfinder offers 4 and the optional
RC-V100 Remote Controller offers 4 additional assignable buttons that can be used when they are each
connected to the camera. In most cases, the names of the buttons printed on the camera and modular units
also indicate their default settings.
1
Supplied accessory for the C200; optional accessory for the C200B.
Changing the Assigned Function
1 Press the MENU button and, while holding it pressed down, press the assignable button whose
function you wish to change.
A list of available functions appears with the current function assigned to the button highlighted.
You can also open the submenu corresponding to the button whose function you wish to change under
> [ Assignable Buttons].
Operating modes:
On the LCD monitor
On the camera grip
Assignable Buttons
126
2 Select the desired function and then press the joystick.
The selected function will be assigned to the selected button.
If you selected one of the preset functions, the rest of the procedure is not necessary. If you selected [User
Setting], continue the procedure to register a menu setting.
3 Navigate the menus to find the menu setting you want to register and then press the joystick.
The selected menu setting will be assigned to the selected button. User-selected settings will be indicated
with a in the assignable buttons’ submenu.
NOTES
In mode, you can check the four [Assignable Buttons] status screens (A 198) to see what functions
are currently assigned to each button.
You can reset only the functions assigned to the assignable buttons, without affecting other camera settings,
with the > [
B
! System Setup] > [Reset] > [Assignable Buttons] function. All the assignable
buttons will return to their default function.
Using an Assignable Button
After you assign a function to one of the buttons, press the button to activate the function. For some functions,
an options menu may appear. In such case, select the desired option and then press the joystick.
Assignable Functions
Functions can be set separately in mode and mode. Refer to the following table for assignable
functions and available modes.
Function name Description A
[One-Shot AF]
1
The camera focuses automatically one time only (one-shot AF function). Ü 84
[AF Lock] Locks the focus during continuous AF. Ü 86
[Face AF] Toggles the [Face AF] setting between [Face Priority] and [Face Only]. Ü 87
[Face Detection] Turns the face detection function on/off. Ü 87
[Tracking] Turns the tracking function on/off. Ü 88
[Focus Guide] Turns the Dual Pixel Focus Guide function on/off. Ü 82
[Peaking: All] Turns peaking on/off from the VIDEO terminal and viewfinder
2
. Ü 83
[Peaking: VIDEO Output],
[Peaking: VF Output]
2
Turns peaking on/off on the respective screen/video output. Ü 83
[Magn.: All]
Turns magnification on/off from the viewfinder
2
and terminals capable of
magnification output.
Ü 83
k
[Magn.:
VF+VIDEO Output],
l
[Magn.:
VIDEO Output],
[Magn.: SDI/HDMI Output]
Turns magnification on/off on the respective screen/video output. Ü 83
[Tele-converter]
Turns the digital tele-converter on/off. The digital tele-converter will activate at
the level selected in the setup menu.
Ü 89
[Push Auto Iris]
The camera automatically adjusts the aperture only while the button is held
pressed down.
Ü 74
[Iris Mode] Switches the aperture adjustment mode between automatic and manual. Ü 72
[Iris +] Opens up the aperture. Ü
73
[Iris –] Closes the aperture. Ü
[ND +] Cycles through ND filter settings in increasing (higher density) order. Ü
71
[ND –] Cycles through ND filter settings in decreasing (lower density) order. Ü
127
Assignable Buttons
[AE Shift +] Compensates the exposure making the image brighter. Ü
75
[AE Shift –] Compensates the exposure making the image darker. Ü
[Backlight] Turns the [Backlight] light metering option on/off. Ü
76
[Spotlight] Turns the [Spotlight] light metering option on/off. Ü
[Zebra: All] Turns zebra patterns on/off from the VIDEO terminal and viewfinder
2
. Ü 91
[Zebra: VIDEO Output],
[Zebra: VF Output]
2
Turns zebra patters on/off on the respective screen/video output. Ü 91
[WFM: All]
Turns the waveform monitor on/off from the viewfinder
2
and terminals capable of
waveform monitor output.
Ü Ü 106
k
[WFM: VF+VIDEO
Output],
l
[WFM: VIDEO
Output],
[WFM: SDI Output]
Turns the waveform monitor on/off on the respective screen/video output. Ü Ü 106
[LUT: All] Turns the LUT on/off from the viewfinder
2
and terminals capable of LUT output. Ü 155
[LUT: VIDEO Output],
[LUT: VF Output]
2
,
[LUT: SDI Output]
Turns on/off the application of the selected LUT on the respective screen/video
output.
Ü 106
[Set White Balance] Starts the white balance calibration for a custom white balance setting. Ü 77
[AWB Lock] While using auto white balance (AWB), locks the current white balance settings. Ü 79
[ AWB],
[Å Set A], [Å Set B],
[¼ Daylight],
[É Tungsten],
[
È
Kelvin]
Changes the white balance mode/setting to the respective option.
Ü 77
[LCD LM-V1 Setup] Opens the [
¢
! Monitoring Setup] menu. Ü Ü
41
[Viewfinder Setup]
2
Opens the [
¢
" Monitoring Setup] menu. Ü Ü
[EVF-V70 Setup]
3
Opens the [
¢
# Monitoring Setup]* menu.
*
l
Appears on the previous page in the menu.
Ü Ü
[OSD Output]
Turns on/off the inclusion of onscreen displays on the selected screens/video
outputs.
Ü Ü 156
[Display] Changes the onscreen display level. Ü Ü 60
[Markers: All]
Turns onscreen markers on/off from the viewfinder
2
and terminals capable of
onscreen marker output.
Ü 90
k
[Markers:
VF+VIDEO Output],
l
[Markers:
VIDEO Output],
[Markers:
SDI/HDMI Output]
Turns onscreen markers on/off on the respective screen/video output. Ü 90
[Color Bars] Turns color bars on/off. Ü 105
[Photo]
1
Records a photo. Ü 120
[Review Recording]
1
Plays back the last clip recorded in mode. Ü 112
[Time Code] Opens the [
B
# System Setup] menu. Ü 92
[Time Code Hold]
1
Puts the time code display on hold or resumes it. Ü Ü 93
[Add Shot Mark]* Adds a shot mark to the clip. Ü Ü
108[Add $ Mark] Adds an $ mark to the clip. Ü Ü
[Add % Mark] Adds a % mark to the clip. Ü Ü
Function name Description A
Assignable Buttons
128
1
Function can be used only by assigning it to a button.
2
k
only.
3
Available only when the optional EVF-V70 OLED Electronic Viewfinder is attached to the camera.
[Headphones +] Increases the headphone volume. Ü Ü
143
[Headphones –] Reduces the headphone volume. Ü Ü
[Monitor Channels] Switches the audio output channel. Ü Ü 157
[Audio Level Indicator] Turns the audio level meter on/off. Ü Ü 101
[FUNC]
Enters the direct setting mode, replicating the function of the camera’s FUNC
button.
Ü 66
[Slow Motion Recording] Turns slow motion recording mode on/off. Ü 114
[Shutter]
Enters the direct setting mode with the shutter speed highlighted and ready to be
adjusted.
Ü 68
[ISO/Gain]
Enters the direct setting mode with the ISO speed or gain value highlighted and
ready to be adjusted.
Ü 69
[White Balance]
Enters the direct setting mode with the white balance highlighted and ready to
be adjusted.
Ü 77
[Status]
1
Displays the status screens. Ü Ü 195
[Audio Status]
Displays the [Audio] status screens. You can press the joystick to open the
[
¡
! Audio Setup] menu.
Ü Ü 199
[Custom Picture/HDR] Opens the most recently opened [ Custom Picture/HDR] menu. Ü 129
[My Menu] Opens the [My Menu] customized menu. Ü 34
[Initialize Media] Opens the [Initialize Media] submenu. Ü Ü 50
[ User Setting]
1
Customizable slot. Assign to the button any menu setting you would like to
register.
Ü Ü
Function name Description A
129
Custom Picture Settings
Custom Picture Settings
The camera lets you change many settings (A 133) that control various aspects of the image produced. As a
set, all these settings are treated as a single custom picture file. After adjusting the desired settings to your
preference, you can save up to 20 custom picture files (in the camera or on an SD card), and load them later to
apply exactly the same settings (A 131). Saving and loading custom picture files are available only for
SD card B.
NOTES
Custom picture files are exclusively compatible for use only with C200 / C200B cameras.
Selecting Custom Picture Files
Select a custom picture file to apply its settings to your recordings or to edit, rename, protect, or transfer it.
1 Open the custom picture file’s [Select] screen.
> [ ! Custom Picture/HDR] > [File] > [Select]
When an optional RC-V100 Remote Controller is connected to the camera, you can press the remote
controller’s CUSTOM PICT. button to open the [ Custom Picture/HDR] submenu.
2 Push the joystick up/down to select the desired file and then press the joystick.
Select one of the custom picture files saved in the camera (C1 to C20). To use the settings of a custom
picture file saved on an SD card, copy the file to the camera in advance (A 132).
When you close the menu, the selected custom picture file’s settings will be applied.
The icon of the [Gamma] setting in effect will appear on the left of the screen. If the detailed settings were
activated ( > [ ! Custom Picture/HDR] > [Activate Other Settings] is set to [On]), will
appear on the left of the screen.
Preset Picture Settings
The camera offers the following preset picture settings (combinations of gamma curve and color matrix). When
you edit a custom picture file to your preference, you can use one of the presets or turn the presets off and
change the desired settings individually (A 133). The default setting is [BT.709].
* In the > [ ! Custom Picture/HDR] menu.
Operating modes:
Operating modes:
[Preset]* [Gamma]* [Color Matrix]* Characteristics
[Canon Log 3] [Canon Log 3] [Neutral]
This setting uses Canon Log 3 gamma and presumes a workflow that includes
post-production processing.
This gamma curve keeps the characteristics of the [Canon Log] setting while
expanding its dynamic range.
[Canon Log] [Canon Log]
[Cinema EOS
Original]
This setting uses Canon Log gamma and presumes a workflow that includes
post-production processing.
It can obtain an impressive dynamic range and color tones appropriate for post-
production.
[BT.709] [Wide DR] [Neutral]
These settings produce the widest dynamic range possible without requiring
post-production. The color space can be selected from 2 options.
Custom Picture Settings
130
NOTES
About the logarithmic gamma curves (Canon Log settings)
These gamma curves assume the need for post-production processing. They were designed to make the
most of the imaging sensor characteristics in order to obtain impressive levels of dynamic range.
- In mode, you can apply a LUT to the LCD screen and viewfinder and to video output from the SDI
terminal to use gamma curve settings more suitable for viewing on a monitor screen.
- There are also other LUTs available that can be applied for processing in post-production. For the latest
information on available LUTs, please visit your local Canon website.
About changing custom picture related settings using the optional RC-V100 Remote Controller
- If a protected custom picture file is selected on the camera, custom picture related settings cannot be
changed using the remote controller.
- Adjusting custom picture related settings using the remote controller will change the settings registered
under the currently selected custom picture file. If you want to keep an important custom picture file, copy it
in advance to an SD card or select in advance a custom picture file you do not mind changing.
Editing a Custom Picture File’s Settings
1 Select a custom picture file (A 129).
2 Open the [Preset] submenu.
> [ ! Custom Picture/HDR] > [Preset]
3 Select the desired option and then press the joystick.
To use preset picture settings: Select the desired preset setting (A 129) and skip to step 5.
To select the main settings individually: Select [Off] and continue to step 4.
4 Select [Gamma], select the desired gamma curve and then press the joystick.
Select [Color Matrix] to select the color matrix in the same way.
5 To change the custom picture’s detailed settings, open the [Activate Other Settings] submenu.
> [ ! Custom Picture/HDR] > [Activate Other Settings]
6 Select [On] and then press the joystick to activate the custom picture’s detailed settings.
7 Select a setting and then press the joystick.
The custom picture’s detailed settings are in > [ ! Custom Picture/HDR] > [Other Settings].
8 Change the setting to the desired level and then press the joystick.
Refer to
Available Custom Picture Settings
(A 133) for details on the various settings.
Repeat steps 7 and 8 for other settings, as necessary.
When you close the menu, the new custom picture settings will be applied.
Operating modes:
131
Custom Picture Settings
Resetting Custom Picture Files
1 Select a custom picture file (A 129).
2 Open the [Reset] submenu.
> [ ! Custom Picture/HDR] > [File] > [Reset]
3 Select [OK] and then press the joystick.
Renaming Custom Picture Files
1 Select a custom picture file (A 129).
2 Open the [Rename] submenu.
> [ ! Custom Picture/HDR] > [File] > [Rename]
3 To change the file name, select [Input] and then press the joystick.
Enter the desired file name (up to 8 characters) using the keyboard screen (A 35).
4 Select [OK] and then press the joystick.
Protecting Custom Picture Files
Protecting a custom picture file prevents its settings from being accidentally changed.
1 Select a custom picture file (A 129).
2 Open the [Protect] submenu.
> [ ! Custom Picture/HDR] > [File] > [Protect]
3 Select [Protect] and then press the joystick.
In the custom picture file selection screen,
i
will appear next to the file name.
To remove protection settings, select [Unprotect] instead.
Copying Custom Picture Files
You can transfer custom picture files between the camera and SD card B.
Copying a File from the Camera to SD Card B
1 Select a custom picture file (A 129).
2 Open the [Copy to SD Card B] submenu.
> [ ! Custom Picture/HDR] > [File] > [Copy to SD Card B]
Operating modes:
Operating modes:
Operating modes:
Operating modes:
Custom Picture Settings
132
3 Select the destination file and then press the joystick.
Select an existing custom picture file to overwrite it or, if this option is available, select [New File] to save the
settings as a new custom picture file on SD card B.
4 Select [OK] and then press the joystick.
The file on SD card B will be overwritten or a new file will be created on the SD card.
5 When the confirmation message appears, press the joystick.
Replacing a File in the Camera with a File on SD Card B
1 Select the custom picture file that you wish to replace (A 129).
2 Open the [Load from SD Card B] submenu.
> [ ! Custom Picture/HDR] > [File] > [Load from SD Card B]
3 Select the file with the settings that you want to replicate and then press the joystick.
4 Select [OK] and then press the joystick.
The file in the camera will be overwritten by the one on SD card B.
5 When the confirmation message appears, press the joystick.
Embedding Custom Picture Settings in a Clip
When you record a clip using custom picture settings, you can have the custom picture file embedded in the
metadata and saved along with the clip.
1 Open the [Add / File] submenu.
> [3 $ Recording/Media Setup] > [Metadata] > [Add / File]
2 Select [On] and then press the joystick.
Select [Off] to not embed custom picture settings in a clip.
Operating modes:
133
Custom Picture Settings
Available Custom Picture Settings
[ ! Custom Picture/HDR] Menu
Submenu levels / Menu items Options / Additional information
[Preset] [Canon Log 3], [Canon Log], [BT.709], [Off]
The camera offers a number of preset color settings (combinations of color space, gamma curve and
color matrix). For details, refer to
Preset Picture Settings
(
A
129).
[Off]: Select this setting when you want to set a different combination of custom picture settings with
the individual custom picture settings described below.
[Gamma] [Canon Log 3], [Canon Log], [Wide DR], [Normal 1 (Standard)], [Normal 2 (x4.0)],
[Normal 3 (BT.709)], [Normal 4 (x5.0)]
Changes the overall look of the image.
[Canon Log 3]: Logarithmic gamma curve that keeps the characteristics of the [Canon Log] setting
while expanding its dynamic range. Requires image processing in post-production.
[Canon Log]: Logarithmic gamma curve that obtains an impressive dynamic range. Requires image
processing in post-production.
[Wide DR]: Gamma curve with a very wide dynamic range. Optimized for playback on TV monitors.
[Normal 1 (Standard)]: Standard picture for playback on TV monitors.
[Normal 2 (x4.0)]: Setting suitable for playback on TV monitors. Produces brighter highlights (bright
areas of the image) than with the [Normal 1 (Standard)] setting.
[Normal 3 (BT.709)]: Setting suitable for playback on TV monitors. Produces a more faithful black
gradation in the shadows (dark areas of the image) than with the [Normal 2 (x4.0)] setting.
[Normal 4 (x5.0)]: Setting suitable for playback on TV monitors. Produces even better black gradation
in the shadows (dark areas of the image) than with the [Normal 3 (BT.709)] setting.
[Color Matrix] [Neutral], [Production Camera], [Cinema EOS Original], [Video], [Off]
The color matrix affects the overall color tonality of the image.
[Neutral]: Reproduces neutral colors.
[Production Camera]: Reproduces colors more suitable for motion picture production.
[Cinema EOS Original]: Color matrix developed by Canon, designed to reproduce the 4K output of an
EOS C500 camera using the BT.709 color space.
[Video]: Reproduces the colors of an EOS C300/EOS C500 camera with no custom picture settings
applied.
[Off]: Colors are not adjusted.
[Activate Other Settings] [On], [Off]
Set this setting to [On] to enable the editing of the custom picture’s detailed settings explained in the
following table.
[Other Settings] [Black], [Black Gamma], [Low Key Satur.], [Knee], [Sharpness], [Noise Reduction], [White Balance],
[Color Matrix Tuning], [Other Functions]
Categories of the custom picture’s detailed settings explained in the following table.
Normal 4
Normal 2/3/4
Normal 3
Normal 1/2
Normal 1
Input
Output
Normal 1
Wide DR
Canon Log
Input
Output
Canon Log
Canon Log 3
Normal 1
Input
Output
Custom Picture Settings
134
[ ! Custom Picture/HDR] > [Other Settings] Submenu (Detailed Settings)
Submenu levels / Menu items Options / Additional information
[Black]
[Master Pedestal] –50 to 50 (±0)
Increases or decreases the black level. Higher settings will make dark areas brighter but decrease
contrast. When [Gamma] is set to one of the Canon Log settings, this setting has no effect on the
picture.
[Master Black Red],
[Master Black Green],
[Master Black Blue]
–50 to 50 (±0)
These settings correct the color cast in blacks. When [Gamma] is set to one of the Canon Log
settings, these settings have no effect on the picture.
[Black Gamma]
[Level] –50 to 50 (±0)
[Range], [Point] –20 to 50 (±0)
These settings control the lower part of the gamma curve (dark areas of the image). When [Gamma]
is set to one of the Canon Log settings or [Wide DR], these settings are not available.
[Level]: Raises or lowers the lower part of the gamma curve.
[Range]: Selects the adjustment range from the selected [Point].
[Point]: Determines the shape of the lower part of the gamma curve.
[Low Key Satur.]
[Activate] [On], [Off]
Set this setting to [On] to enable the adjustment of color saturation in dark areas with the [Level]
setting.
[Level] –50 to 50 (±0)
Specifies how saturated colors are in dark areas.
[Knee]
[Activate] [On], [Off]
Set this setting to [On] to enable the adjustment of the knee point with the following settings. When
[Gamma] is set to one of the Canon Log settings or [Wide DR], the [Knee] settings are not available.
Input
Output
[Point]
[Range]
[Level]
135
Custom Picture Settings
[Slope] –35 to 50 (±0)
[Point] 50 to 109 (95)
[Saturation] –10 to 10 (±0)
These settings control the upper part of the gamma curve (highlights of the image). By compressing
the highlights, you can prevent parts of the image from being overexposed.
[Slope]: Determines the slope of the gamma curve above the knee point.
[Point]: Sets the knee point of the gamma curve.
[Saturation]: Adjusts the color saturation in the highlights.
[Sharpness]
[Level] –10 to 50 (±0)
Sets the sharpness level of the video output signal and the recorded signal.
[H Detail Freq.] –8 to 8 (±0)
Sets the center frequency of horizontal sharpness. Setting higher values increases the frequency,
which, in turn, increases the sharpness.
[Coring Level] –30 to 50 (±0)
Sets the level of correction of artifacts caused by high sharpness levels (coring). Higher values
prevent sharpness from being applied to minute details, resulting in less noise.
[Coring D-Ofst] 0 to 50 (0)
Sets the coring level of the minimum brightness level (level-dependent offset).
[Coring D-Curve] 0 to 8 (0)
Sets the curve of coring adjustment, in other words, how the coring level changes from the value set
for [Coring Level] to that set for [Coring D-Ofst] (level-dependent curve).
[HV Detail Bal.] –8 to 8 (±0)
Adjusts the ratio between horizontal and vertical detail. Higher values emphasize vertical detail while
lower values emphasize horizontal detail.
[Limit] –50 to 50 (±0)
Restricts how much sharpness is applied.
[Select] 0 to 15 (0)
In addition to the sharpness set by [Level], [Select] sets the sharpness for areas with higher
frequencies. Higher values apply more sharpness to areas with higher frequencies. Use this for
subjects in which normal sharpening is not effective.
[Knee Aperture Gain] 0 to 9 (0)
[Knee Aperture Slope] 0 (no slope), 1 (steep slope) to 3 (gradual slope) (1)
These settings allow you to adjust the sharpness of only the areas above the knee point. When
[Gamma] is set to one of the Canon Log settings or [Wide DR], these settings have no effect on the
picture.
[Knee Aperture Gain]: Determines the amount of sharpness.
[Knee Aperture Slope]: Sets the slope of the sharpness.
[Level Depend Level] 0 to 50 (0)
Sets the brightness of the dark areas of the image that will be affected.
Submenu levels / Menu items Options / Additional information
Input
OutputOutput
Input
[Slope]
[Point]
Custom Picture Settings
136
NOTES
If editing of the custom picture file's detailed settings is enabled ([Activate Other Settings] is set to [On]), when
an optional RC-V100 Remote Controller is connected to the camera, the following custom picture settings can
be changed using the buttons and dials on the remote controller.
- [Other Settings] > [Black] > [Master Pedestal], [Master Black Red], [Master Black Blue]
- [Other Settings] > [Black Gamma] > [Level]
- [Other Settings] > [Knee] > [Slope], [Point] (only when [Knee] > [Activate] is set to [On])
- [Other Settings] > [Sharpness] > [Level]
- [Other Settings] > [White Balance] > [R Gain], [B Gain]
[Level Depend Slope] 0 (no slope), 1 (steep slope) to 3 (gradual slope) (0)
Determines the slope of the area between the upper and lower parts of the gamma curve.
[Level Depend Offset] 0 to 50 (0)
Adjusts the sharpness level of dark areas in the image. Setting higher values will lower the sharpness
level.
[Noise Reduction]
[Level] 1 (lowest level) to 12 (highest level), [Off]
Reduces the amount of noise that appears in the image.
[White Balance]
[R Gain], [B Gain] –50 to 50 (±0)
These settings adjust the amount of white balance throughout the whole image by changing the
intensity of red tones ([R gain]) and blue tones ([B Gain]).
[Color Matrix Tuning]
[Gain] –50 to 50 (±0)
[Phase] –18 to 18 (±0)
These settings adjust the color intensity ([Gain]) and color phase ([Phase]) of the color matrix,
affecting the color tones of the whole image.
[R-G], [R-B], [G-R], [G-B],
[B-R], [B-G]
–50 to 50 (±0)
Each matrix changes the tint of the picture along the color gradations detailed below, affecting the
color tones of the whole image.
[R-G]: cyan/green and red/magenta; [R-B]: cyan/blue and red/yellow;
[G-R]: magenta/red and green/cyan; [G-B]: magenta/blue and green/yellow;
[B-R]: yellow/red and blue/cyan; [B-G]: yellow/green and blue/magenta.
[Other Functions]
[Setup Level] –50 to 50 (±0)
Adjusts the black level set by the [Black] > [Master Pedestal] setting. When [Gamma] is set to one
of the Canon Log settings, this setting has no effect on the picture.
[Over 100%] [Through], [Press], [Clip]
Determines how the camera handles video signals exceeding 100%.
[Through]: Leave the signal unchanged.
[Clip]: Clip the signal at 100%.
[Press]: Compress a signal of up to 108% down to 100% levels.
Submenu levels / Menu items Options / Additional information
137
Saving and Loading Camera Settings
Saving and Loading Camera Settings
After you adjust settings in the various menus, you can save those settings in the camera or on SD card B. You
can load those settings at a later date or on another C200 / C200B camera so that you can use that camera in
the exact same way.
Saving Camera Settings
1 Open the [Save] submenu.
[
B
! System Setup] > [Transfer Menu/
/
] > [Save]
2 Select [To Camera] or [To SD Card B] and then press the joystick.
3 Select [OK] and press the joystick.
The camera’s menu settings will be saved to the selected destination. If menu settings were previously
saved, the old file will be overwritten by the current menu settings.
4 When the confirmation message appears, press the joystick.
Loading Camera Settings
1 Open the [Load] submenu.
[
B
! System Setup] > [Transfer Menu/
/
] > [Load]
2 Select [From Camera] or [From SD Card B] and then press the joystick.
3 Select [OK] and press the joystick.
The camera’s menu settings will be replaced by the settings saved on the selected source. Then, the screen
will turn black momentarily and the camera will restart.
NOTES
The following menu settings are not saved with this operation when the passwords have been set by the user.
- Encryption keys/passwords under [
7
! Network Settings] > [Connection Settings]
- The passwords under [
7
! Network Settings] > [Browser Remote Settings] > [Full: Password],
[Camera: Password] and [Meta: Password]
- The password under [
7
! Network Settings] > [FTP Transfer Settings] > [FTP: Password]
When menu settings are loaded with this operation, even protected custom picture files in the camera will be
replaced.
Camera settings files are exclusively compatible for use only with C200 / C200B cameras.
Operating modes:
Saving and Loading Camera Settings
138
5
139
Playback
Playback
This section explains how to play back clips with the camera. For details on playing back clips using an external
monitor, refer to
Connecting to an External Monitor or Recorder
(A 152). For details on viewing photos on the
SD card, refer to
Viewing Photos
(A 121).
Clip Index Screen
Playback functions are accessed from the clip index screen. To
open the clip index screen, set the camera to mode. When
the primary recording format is RAW, clips are saved on the CFast
card; when it is MP4 or XF-AVC, clips are saved on an SD card.
If the recording media contains clips recorded at a system
frequency other than the one currently used by the camera, you
will not be able to play back the clips. In such case, change the
camera’s system frequency (A 64) to match the recordings on
the recording media.
Set the
Q
switch to MEDIA.
The camera switches to mode and the clip index screen appears. The index screen that appears
depends on the currently selected recording format but you can change the index screen with the procedure
on the next page.
Some of the information on the index screen will change depending on the selected clip.
Operating modes:
67
12
3
1
5
9
4
2
151413 16
11
10
8
Playback
140
Switching Between the SD Card Slots
If both SD card slots contain a SD card, you can switch between
them as necessary.
Press the SLOT SELECT button.
The access indicator of the selected SD card slot will illuminate in
green.
Switching to Other Index Screens
The clip index screen shows primary clips recorded on the currently
selected recording media. From the clip index screen you can
switch to the following index screens to view just some of the clips
or other types of recordings.
[RAW] index screen: Only clips recorded in RAW on the CFast card.
[MP4] index screen: Only clips recorded in MP4 format on the same
SD card.
[XF-AVC] index screen: Only clips recorded in XF-AVC format on the
same SD card.
[Photos] index screen: Photos on SD card B.
1 Press the INDEX button.
When you press the button on the clip index screen, the index screen selection menu will appear.
2 Select the desired index screen and then press the joystick.
The selected index screen appears.
Select [Cancel] instead to cancel the operation.
Press the INDEX button again to return to the clip index screen.
1 Shot mark (A 108)
2 $ mark/% mark (A 108)
3 Orange selection frame
4 Clip identification (camera index, reel number and
clip number) (A 61)
For MP4 clips, the file name (A 62) appears
instead.
5 Recording date and time
6 Clip thumbnail
7 Recording media
67
SD card (the one currently selected
appears in white)
;
CFast card
8Network icon
Appears when transferring a clip to an FTP server.
9 Clip number / Total number of clips
10 Recording date (month and day only) and time
11 Clip’s start time code
12 Clip duration
13 Embedded custom picture file (A 132)
14 Special recording mode (A 114)
15 Color sampling and resolution (A 64)
For RAW clips, [RAW] appears instead of the
color sampling.
16 Frame rate (A 64)
141
Playback
Playing Back Clips
After you select a clip to play back from the index screen, you can control
the playback with the buttons on the camera (play/pause/stop only) or
with the joystick and onscreen joystick guide (A 143).
1 Move the orange selection frame to the clip you want to play
back.
2 Press the
Ò
button to start playback.
The selected clip will be played back.
Press the
Ò
button again or press the joystick to pause/resume
the playback.
Press the
Ñ
button to stop the playback and return to the index
screen.
IMPORTANT
Observe the following precautions while an access indicator is illuminated in red. Failure to do so may result in
permanent data loss.
- Do not disconnect the power source or turn off the camera.
- Do not open the card slot cover of the card being accessed and do not remove the card.
Onscreen Displays
Custom picture settings of RAW clips during playback
RAW clips are played back with the following custom picture settings.
[Gamma]: [Wide DR]
[Color Space]: [BT.709]
[Color Matrix]: [Neutral]
Other picture settings are the same as those when [Activate Other Settings] is set to [Off].
5 6 7 8 9
1816 17 2019
10
14
15
3
4
1
2
13
12
11
Playback
142
1
Only when [¢ $ Monitoring Setup] (l [¢ # Monitoring Setup]) > [Custom Display] > [Camera Data] is set to [On].
2
Only when [¢ $ Monitoring Setup] (l [¢ # Monitoring Setup]) > [Custom Display] > [Audio Level Indicator] is set
to [On].
3
Only when [¢ $ Monitoring Setup] (l [¢ # Monitoring Setup]) > [Custom Display] > [Date/Time] is set to [On].
NOTES
You can repeatedly press the DISP button to switch the onscreen displays in the following sequence.
Show all onscreen displays hide the joystick guide hide all onscreen displays*
* Except for momentary displays like the clip number when the playback switches to a different clip, or the time code and playback
operation at the end of the playback.
1 High temperature warning (A 207)
2 Fan operation (A 63)
3 Shutter speed
1
(A 67)
4 Joystick guide (A 143)
5 Recording media
67
SD card
;
CFast card
6 Playback operation
7 Frame rate (A 64)
For clips recorded using slow motion recording,
the shooting frame rate and playback frame rate
will both be displayed.
8 Embedded custom picture file (A 132)
9 $ mark/% mark (A 108)
10 Time code (A 92)
11 Clip number / Total number of clips
12 Color depth and resolution (A 64)
Color sampling and resolution are displayed for
MP4 and XF-AVC clips.
13 Onscreen displays superimposed on video output
(A 156)
14 Audio level meter
2
15 Audio output channel (A 157)
16 ISO Speed/Gain
1
(A 69)
17 Aperture value
1
(A 72)
18 User bit (A 95)
19 Recording date and time
3
20 Remaining battery time (A 58)
6 Playback operation
* The playback speed (x5, x15 or x60) will also appear in the indicator.
Ð
PLAY Playback
Ý
PAUSE Playback pause
Ô
/
Ó
Frame reverse/Frame advance
F FWD
×
Fast playback*
Ø
F REV Fast reverse playback*
143
Playback
Playback Controls
The following playback types are available using the onscreen joystick guide and any of the joysticks.
NOTES
There is no audio during any of the playback types listed in the previous table.
During some playback modes, you may notice some anomalies (blocky video artifacts, banding, etc.) in the
playback picture.
The speed indicated on the screen is approximate.
If the clip’s bit rate setting includes Long GOP compression, during frame advance, the time advanced
between frames is approximately 0.5 seconds.
Adjusting the Volume
You can use the speaker or connect headphones to the
×
(headphone)
terminal to listen to the audio during playback. Adjust the headphone
volume with the > [
¡
! Audio Setup] > [Speaker Volume] or
[Headphone Volume] setting. If you set an assignable button to
[Headphones +] or [Headphones –] (A 125), you can press the button to
adjust the headphone volume without using the menu.
The audio signal will also be output from the SDI terminal and HDMI OUT
terminal.
NOTES
For details on changing the audio channel, refer to
Audio Output
(A 157).
Playback type Operation
Fast playback
During playback, push the joystick up or down.
Repeat to increase the playback speed to approximately 5x 15x 60x the normal speed.
Frame advance/reverse During playback pause, push the joystick up or down.
Return to playback mode
Press the joystick itself.
Alternatively, you can press the
Ò
button.
×
(headphone) terminal
Clip Operations
144
Clip Operations
Besides playing back a clip, you can perform other operations such as deleting a clip or displaying clip
information. This is done through the clip menu, which contains different functions depending on the index
screen. Refer to the following table for available functions and refer to the following pages for more details of the
functions.
Clip Menu Functions
1
If the clip already contains such a clip mark, only the delete option will be available.
2
Appears only when a clip requires recovery. In such case, only [Cancel], [Recover Clip] and [Delete Clip] will appear in the menu.
Using the Clip Menu
1 Select a clip and then press the joystick.
The clip menu appears. Available functions depend on the index screen and which functions are enabled.
2 Select the desired function and then press the joystick.
The function is enabled. For some functions, further action may be required. Follow the onscreen directions.
Press the CANCEL button instead to return to the clip index screen.
IMPORTANT
Observe the following precautions while an access indicator is illuminated in red. Failure to do so may result in
permanent data loss.
- Do not disconnect the power source or turn off the camera.
- Do not open the card slot cover of the card being accessed and do not remove the card.
NOTES
To perform operations on MP4 or XF-AVC clips recorded on an SD card, make sure the LOCK switch on the
SD card is not set to prevent writing.
Menu item Description
Index screen
[RAW] [MP4] [XF-AVC]
[Cancel] Closes the clip menu. Ü Ü Ü
[Display Clip Info] Displays the clip information screen (
A
145). Ü Ü Ü
[Add $ Mark],
[Delete $ Mark]
Adds or deletes an $ mark (
A
108). Ü
1
[Add % Mark],
[Delete % Mark]
Adds or deletes a % mark (
A
108). Ü
1
[Del. All Shot Marks] Deletes all the shot marks from a clip. Ü
[Recover Clip]
2
Recovers a clip (
A
52). Ü Ü Ü
[Delete Clip] Deletes a clip (
A
147). Ü Ü Ü
[Delete User Memo]
Deletes the user memo and GPS information of a clip
(
A
148).
Ü
[FTP Transfer] Transfers clips using the FTP protocol (
A
182). Ü Ü
Operating modes:
145
Clip Operations
Displaying Clip Information
Select [Display Clip Info] in the clip menu to display the selected clip’s information screen ([Clip Info] screen).
Push the joystick left/right to switch to the previous/next clip. When you have finished, press the CANCEL button
to return to the clip index screen.
Displaying the Lens Information and User Memo
From the [Clip Info] screen, push the joystick up to display the [Lens & Q] screen. In this screen you can check
details about the lens used to record the clip. If the clip has an embedded user memo, you will see the user
memo content in this screen as well. Push the joystick down to return to the [Clip Info] screen.
Displaying Custom Picture Settings
When displaying the [Clip Info] screen of a clip that has a custom picture file recorded with it, push the joystick
down to display the first of four screens with the clips custom picture settings ([/ Data 1/4] screen). Push the
joystick down to display the other three [/ Data] screens [Lens & Q] screen [Clip Info] screen.
Operating modes:
Operating modes:
Operating modes:
9
546
1
3
2
8
10
14
13
15
16
17
11
12
7
1 Thumbnail of the selected clip
2 Thumbnail of the next clip
3 Thumbnail of the previous clip
4 Recording media
67
SD card (the one currently selected
appears in white)
;
CFast card
5 Clip geotagged with GPS information (A 111)
6 Special recording mode (A 114)
7 Clip number / Total number of clips
8 Recording date and time
9 Clip file name (A 61, 62)
10 Compression, bit rate and resolution (A 64)
11 Frame rate (A 64)
12 $ mark/% mark/! mark (A 108)
13 Embedded custom picture file (A 132)
14 Color sampling (A 64)
For RAW clips, [RAW] and the color depth appear
instead.
15 Clip’s start time code
16 Clip’s end time code
17 Clip duration
Clip Operations
146
Adding $ Marks or % Marks
You can add an OK mark ($) or check mark (%) to XF-AVC clips to help you identify particular clips for a future
purpose. Furthermore, you cannot delete clips with an $ mark so you can use this mark also to protect
important clips.
Adding an $ Mark or % Mark during Playback
To add an OK mark ($) or check mark (%) to a clip during playback or playback pause, you must first set an
assignable button to [Add $ Mark] or [Add % Mark] in advance.
1 Set an assignable button to [Add $ Mark] or [Add % Mark] (A 125).
To add both types of clip marks (to different clips), set one assignable button to [Add $ Mark] and another
assignable button to [Add % Mark].
2 Open the [XF-AVC] index screen and select the desired clip.
3 During playback or playback pause, press the assignable button to add the clip mark.
A message indicating the clip mark will appear and the selected clip mark will be added to the clip.
Adding a clip mark to a clip during playback will pause the playback.
Adding an $ Mark or % Mark from the Index Screen
1 Open the [XF-AVC] index screen, select the desired clip and then press the joystick to open the clip menu.
2 Select [Add $ Mark] or [Add % Mark] and then press the joystick.
The clip information screen appears and it prompts you to confirm the operation.
3 Select [OK] and then press the joystick.
The screen changes back to the clip index screen and an $ mark or % mark appears next to the selected
clip’s thumbnail.
Select [Cancel] instead to cancel the operation.
NOTES
A clip cannot have both an $ mark and % mark at the same time. When you add a % mark to a clip with an
$ mark, the $ mark will be deleted. Similarly, when you add an $ mark to a clip with a % mark, the %
mark will be deleted.
Deleting an $ Mark or % Mark from a Clip
1 Open the [XF-AVC] index screen, select the desired clip and then press the joystick to open the clip menu.
2 Select [Delete $ Mark] or [Delete % Mark] and then press the joystick.
The clip information screen appears and it prompts you to confirm the operation.
3 Select [OK] and then press the joystick.
The screen changes back to the clip index screen and the selected mark is deleted.
Select [Cancel] instead to cancel the operation.
Operating modes:
Operating modes:
147
Clip Operations
Adding Shot Marks
During playback, you can add a shot mark (!) to frames that you want to set apart in an XF-AVC clip.
Adding Shot Marks during Playback
To add a shot mark to a clip during playback or playback pause, you must first set an assignable button to [Add
Shot Mark] in advance.
1 Set an assignable button to [Add Shot Mark] (A 125).
2 During playback or playback pause, press the assignable button at the point in the clip to add the
shot mark.
A message indicating the shot mark appears on the screen and the shot mark is added to the clip.
Adding a shot mark to a clip during playback will pause the playback.
NOTES
Up to 100 shot marks can be added to a single clip.
There may be up to a 0.5 second delay between the frame shown when you press the assignable button and
the frame to which the camera adds the shot mark.
Deleting All Shot Marks in a Clip from the Index Screen
1 Select the desired clip and then press the joystick to open the clip menu.
2 Select [Del. All Shot Marks] and then press the joystick.
The clip information screen appears and it prompts you to confirm the operation.
3 Select [OK] and then press the joystick.
All shot marks in the selected clip are deleted and the screen changes back to the previous index screen.
Deleting Clips
You can delete clips from a CFast or SD card one at a time. To delete XF-AVC clips with an $ mark, delete the
$ mark beforehand (A 146)
1 Select the desired clip and then press the joystick to open the clip menu.
2 Select [Delete Clip] and then press the joystick.
The clip information screen appears and it prompts you to confirm the operation.
3 Select [OK] and then press the joystick.
Select [Cancel] instead to cancel the operation.
While the clip is being deleted, the operation cannot be canceled.
4 When the confirmation message appears, press the joystick.
Operating modes:
Operating modes:
Operating modes:
Clip Operations
148
Deleting the User Memo and GPS Information
1 Open the [XF-AVC] index screen, select the desired clip and then press the joystick to open the clip
menu.
2 Select [Delete User Memo] and then press the joystick.
The [Delete User Memo] screen appears and it prompts you to confirm the operation.
3 Select [OK] and then press the joystick.
The user memo and GPS information are deleted and the screen changes back to the clip index screen.
Select [Cancel] instead to cancel the operation.
Operating modes:
6
149
External Connections
Video Output Configuration
The video signal output from the SDI terminal and HDMI
TM
OUT terminal, depends on the clip’s video
configuration and on various menu settings. Output will be from either the SDI terminal or HDMI terminal, and the
camera will switch the output automatically.
In the following tables, the listed bit depth refers to the video signal’s effective bit depth.
Recording Video Signal Configuration and Video Output Configuration by Terminal
Refer to the following table for the video output configuration from each terminal, depending on the recording
video configuration used. Footnotes appear at the end of the tables (A 151).
Operating modes:
Recording video configuration Video output configuration
Video
format
1
Frame rate
2
Resolution
SDI terminal
3
HDMI OUT terminal
3
SDI output
4
Maximum resolution
4
SDI/HDMI scan mode
4
SDI/HDMI scan mode
4
P
4
PsF
4
P
4
PsF
4
2048x1080 /
1920x1080
4
1920x1080
4
3840x2160
4
1920x1080
4
RAW
59.94P
29.97P
23.98P
4096x2160
2048x1080
YCbCr 4:2:2
10 bit
1920x1080
5
YCbCr 4:2:2
10 bit
59.94i / 29.97PsF
6
1920x1080
5
YCbCr 4:2:2 10 bit
1920x1080
5
YCbCr 4:2:2 10 bit
59.94i
1920x1080
5
YCbCr 4:2:2 10 bit
50.00P
25.00P
50.00i / 25.00PsF
7
1920x1080
5
YCbCr 4:2:2 10 bit
50.00i
1920x1080
5
YCbCr 4:2:2 10 bit
24.00P
60.00i
1920x1080
5
YCbCr 4:2:2 10 bit
60.00i
1920x1080
5
YCbCr 4:2:2 10 bit
MP4 /
XF-AVC
59.94P
29.97P
23.98P
3840x2160
1920x1080
YCbCr 4:2:2 10 bit
59.94i / 29.97PsF
6
1920x1080
YCbCr 4:2:2 10 bit
3840x2160
YCbCr 4:2:2
8bit
8
1920x1080
YCbCr 4:2:2
10 bit
720x480
(59.94P only)
59.94i
1920x1080
YCbCr 4:2:2 10bit
1920x1080
1920x1080
YCbCr 4:2:2
10 bit
59.94i
(XF-AVC
only)
1920x1080
1920x1080
YCbCr 4:2:2 10 bit
119.88P
9
59.94P
1920x1080
YCbCr 4:2:2 8 bit
59.94i
1920x1080
YCbCr 4:2:2 8 bit
59.94P
1920x1080
YCbCr 4:2:2 8 bit
59.94i
1920x1080
YCbCr 4:2:2 8 bit
50.00P
25.00P
3840x2160
1920x1080
YCbCr 4:2:2 10 bit
50.00i / 25.00PsF
7
1920x1080
YCbCr 4:2:2 10 bit
3840x2160
YCbCr 4:2:2
8bit
8
1920x1080
YCbCr 4:2:2
10 bit
720x576
(50.00P only)
50.00i
1920x1080
YCbCr 4:2:2 10 bit
1920x1080
1920x1080
YCbCr 4:2:2
10 bit
Video Output Configuration
150
Playback Video Configuration and Video Output Configuration by Terminal
Refer to the following tables for the video output configuration from each terminal, depending on the video
configuration of the clip being played back.
MP4 /
XF-AVC
100.00P
9
1920x1080
50.00P
1920x1080
YCbCr 4:2:2 8 bit
50.00i
1920x1080
YCbCr 4:2:2 8 bit
50.00P
1920x1080
YCbCr 4:2:2 8 bit
50.00i
1920x1080
YCbCr 4:2:2 8 bit
50.00i
(XF-AVC
only)
1920x1080
YCbCr 4:2:2 10 bit
24.00P
3840x2160
1920x1080
YCbCr 4:2:2 10 bit
60.00i
1920x1080
YCbCr 4:2:2 10 bit
3840x2160
YCbCr 4:2:2
8bit
1920x1080
YCbCr 4:2:2
10 bit
60.00i
1920x1080
YCbCr 4:2:2 10 bit
1920x1080
1920x1080
YCbCr 4:2:2
10 bit
120.00P
9
1920x1080
60.00P
1920x1080
YCbCr 4:2:2 8 bit
60.00i
1920x1080
YCbCr 4:2:2 8 bit
60.00P
1920x1080
YCbCr 4:2:2 8 bit
60.00i
1920x1080
YCbCr 4:2:2 8 bit
Operating modes:
Clip’s video configuration Video output configuration
Video
format
1
Frame rate
2
Resolution
SDI terminal
3
HDMI OUT terminal
3
SDI output
4
Maximum resolution
4
SDI/HDMI scan mode
4
SDI/HDMI scan mode
4
P
4
PsF
4
P
4
PsF
4
2048x1080 /
1920x1080
4
1920x1080
4
3840x2160
4
1920x1080
4
RAW
59.94P
29.97P
23.98P
4096x2160
2048x1080
YCbCr 4:2:2
10 bit
1920x1080
5
YCbCr 4:2:2
10 bit
59.94i / 29.97PsF
6
1920x1080
5
YCbCr 4:2:2 10 bit
1920x1080
5
YCbCr 4:2:2 10 bit
59.94i
1920x1080
5
YCbCr 4:2:2 10 bit
50.00P
25.00P
50.00i / 25.00PsF
7
1920x1080
5
YCbCr 4:2:2 10 bit
50.00i
1920x1080
5
YCbCr 4:2:2 10 bit
24.00P
60.00i
1920x1080
5
YCbCr 4:2:2 10 bit
60.00i
1920x1080
5
YCbCr 4:2:2 10 bit
Recording video configuration Video output configuration
Video
format
1
Frame rate
2
Resolution
SDI terminal
3
HDMI OUT terminal
3
SDI output
4
Maximum resolution
4
SDI/HDMI scan mode
4
SDI/HDMI scan mode
4
P
4
PsF
4
P
4
PsF
4
2048x1080 /
1920x1080
4
1920x1080
4
3840x2160
4
1920x1080
4
151
Video Output Configuration
1
> [
3
! Recording/Media Setup] > [Main Rec Format].
2
The frame rate of the video output will be the same as that used for recording (except during slow motion recording and when
the SDI/HDMI scan mode is set to PsF).
3
You can choose to superimpose onscreen displays on the video output from the SDI terminal or HDMI OUT terminal (A 156).
(This is not available for the HDMI OUT terminal when outputting 4K (3840x2160) video at 59.94P or 50.00P.)
You can apply peaking (A 83) and magnification (A 83) to the video output from the SDI terminal.
4
Refers to the [
B
" System Setup] > [SDI Output], [HDMI Max Res.] and [SDI/HDMI Scan Mode] settings and their options.
5
Video with a resolution of 4096x2160 or 2048x1080 will be displayed letterboxed.
6
Only when the frame rate is 29.97P.
7
Only when the frame rate is 25.00P.
8
Output will be YCbCr 4:2:0 8 bit when the frame rate is 59.94P or 50.00P.
9
Only during slow motion recording mode.
10
When [
3
! Recording/Media Setup] > [Sub Rec Format] is set to [MP4 (SD Card)] or [XF-AVC (SD Card)].
MP4 /
XF-AVC
59.94P
29.97P
23.98P
3840x2160
1920x1080
YCbCr 4:2:2 8 bit
59.94i / 29.97PsF
6
1920x1080
5
YCbCr 4:2:2 8 bit
3840x2160
YCbCr 4:2:2
8bit
8
1920x1080
YCbCr 4:2:2
8bit
59.94i
1920x1080
5
YCbCr 4:2:2 8 bit
1920x1080
1920x1080
5
YCbCr 4:2:2 8 bit
720x480 (59.94P only)
2048x1080
10
2048x1080
YCbCr 4:2:2
8bit
1920x1080
5
YCbCr 4:2:2
8bit
59.94i
(XF-AVC
only)
1920x1080
1920x1080
YCbCr 4:2:2 8 bit
50.00P
25.00P
3840x2160
1920x1080
YCbCr 4:2:2 8 bit
50.00i / 25.00PsF
7
1920x1080
5
YCbCr 4:2:2 8 bit
3840x2160
YCbCr 4:2:2
8bit
8
1920x1080
YCbCr 4:2:2
8bit
50.00i
1920x1080
5
YCbCr 4:2:2 8 bit
1920x1080
1920x1080
5
YCbCr 4:2:2 8 bit
720x576 (50.00P only)
2048x1080
10
2048x1080
YCbCr 4:2:2
8bit
1920x1080
5
YCbCr 4:2:2
8bit
50.00i
(XF-AVC
only)
1920x1080
1920x1080
YCbCr 4:2:2 8 bit
24.00P
3840x2160
1920x1080
YCbCr 4:2:2 8 bit
60.00i
1920x1080
5
YCbCr 4:2:2 8 bit
3840x2160
YCbCr 4:2:2
8bit
1920x1080
YCbCr 4:2:2
8bit
60.00i
1920x1080
5
YCbCr 4:2:2 8 bit
1920x1080
1920x1080
5
YCbCr 4:2:2 8 bit
2048x1080
10
2048x1080
YCbCr 4:2:2
8bit
1920x1080
5
YCbCr 4:2:2
8bit
Clip’s video configuration Video output configuration
Video
format
1
Frame rate
2
Resolution
SDI terminal
3
HDMI OUT terminal
3
SDI output
4
Maximum resolution
4
SDI/HDMI scan mode
4
SDI/HDMI scan mode
4
P
4
PsF
4
P
4
PsF
4
2048x1080 /
1920x1080
4
1920x1080
4
3840x2160
4
1920x1080
4
Connecting to an External Monitor or Recorder
152
Connecting to an External Monitor or Recorder
When you connect the camera to an external device, be it a monitor (to monitor the recording or for playback) or
an external video recorder (for recording), use the terminal on the camera that matches the one you wish to use
on the monitor. Then, select the video signal output configuration (A 149).
Connection Diagram
We recommend that you power the camera from a power outlet using the AC adapter.
Using the SDI Terminal
The digital signal that is output from the SDI terminal includes the video signal, audio signal (up to 4 channels)
and the recording command signal. When using the SDI terminal, you can output various assistance displays
(onscreen markers, magnification, onscreen displays) in order to check them also on an external monitor.
Selecting the Output Signal
1 Open the [SDI Output] submenu.
> [
B
" System Setup] > [SDI Output]
2 Select the desired option and then press the joystick.
Options
[2048x1080/1920x1080]: Outputs video with a resolution of 2048x1080 or 1920x1080.
[1920x1080]: Outputs 1920x1080 (Full HD) video. When the horizontal resolution of the recording
video configuration is 4096 or 2048, the image will be displayed letterboxed.
Operating modes:
HDMI OUT terminal
HDMI cable
(commercially available)
BNC cables
(commercially available)
3G/HD-SDI inputs
External
monitor/
digital video
recorder
HDMI input
SDI terminal
153
Connecting to an External Monitor or Recorder
Setting the 3G-SGI Mapping Level
1 Open the [3G-SDI Mapping] submenu.
> [
B
" System Setup] > [3G-SDI Mapping]
2 Select the desired option and then press the joystick.
You can select a video output signal compliant with Level A or Level B of the SMPTE ST 425-1 standard.
Preparations for Recording 2K Video Using an External Recorder
You can connect an external video recorder to the cameras SDI terminal to record 2K video. Refer also to the
external recorder’s instruction manual for details on how to record.
For details about the audio channels that are output, refer to
Audio Output
(A 157).
NOTES
Signals cannot be output from the SDI terminal and HDMI OUT terminal simultaneously. To output signals from
the SDI terminal, make sure the HDMI OUT terminal does not have an HDMI cable connected to it.
Depending on the external recorder, you may not be able to record at the desired video configuration.
After you connect the camera to the external recorder, make a test recording first to check that audio and
video are recorded correctly on the external recorder.
•You can set > [
Æ
$ Recording/Media Setup] > [Rec Command] to [On] to use the camera’s
REC button to control also the recording operation of an external recorder connected to the SDI terminal.
However, this function cannot be used when a special recording mode other than pre-recording is activated.
Using the HDMI OUT Terminal
The HDMI
TM
OUT terminal also offers a digital connection and outputs both a video and audio signal. You can
output also the camera’s time code signal and onscreen displays (including onscreen markers)*. The audio
output signal will be 2-channel linear PCM audio (16-bit, 48 kHz sampling). When recording with 4-channel
audio, you can select which audio channels to output (A 157).
* Not available for 4K clips (3840x2160) recorded at 59.94P or 50.00P.
Selecting the Output Signal in Mode
When the camera is in mode, you can select the maximum resolution output and whether to output the
time code from the HDMI OUT terminal.
1 Open the [HDMI Max Res.] submenu to select the maximum resolution.
> [
B
" System Setup] > [HDMI Max Res.]
2 Select [3840x2160] or [1920x1080] and then press the joystick.
3 Open the [HDMI Time Code] submenu to output the time code.
> [
3
$ Recording/Media Setup] > [HDMI Time Code]
4 Select [On] and then press the joystick.
Operating modes:
Operating modes:
Operating modes:
Connecting to an External Monitor or Recorder
154
Selecting the Output Signal in Mode
When the camera is in mode, you can select the maximum resolution output from the HDMI OUT
terminal.
1 Open the [HDMI Max Res.] submenu.
> [
B
" System Setup] > [HDMI Max Res.]
2 Select [3840x2160] or [1920x1080] and then press the joystick.
NOTES
The HDMI OUT terminal is for output only. Do not connect the camera to another device’s output terminal
using the HDMI OUT terminal as this will cause a malfunction.
Correct operation cannot be guaranteed when connecting the camera to DVI monitors.
Video may not be output correctly depending on the monitor. In such case, use another terminal.
You can set both > [
3
$ Recording/Media Setup] > [Rec Command] and [HDMI Time Code] to
[On] to use the camera’s REC button to control also the recording operation of an external recorder connected
to the HDMI OUT terminal. The camera’s time code signal will be output as well.
The time code will not be output from the HDMI OUT terminal in the following cases.
-During mode.
- During SD output.
- During slow motion recording.
- During interval recording.
- During frame recording.
Setting the Scan Mode of the Output Signal
You can set the scan mode of the video signal output from the SDI terminal or HDMI OUT terminal.
1 Open the [SDI/HDMI Scan Mode] submenu.
2 Select [P] or [PsF] and then press the joystick.
HDR Output
When you record RAW clips, the camera can output high dynamic range (HDR) video compliant with the ITU-R
BT.2100(HLG) or ITU-R BT.2100(PQ) standard from the SDI terminal or HDMI OUT terminal. The signal output
will use narrow range coding.
1 Open the [HDR/LUT] screen.
> [ ! Custom Picture/HDR] > [HDR/LUT]
2 Select [HDR: Off] and then press the joystick.
3 Push the joystick left/right to select [HDR: HLG] or [HDR: PQ] and then press the joystick.
Select [HDR: Off] to turn off HDR output.
Operating modes:
Operating modes:
Operating modes:
155
Connecting to an External Monitor or Recorder
Applying a LUT to Screens/Video Outputs
While recording using special gamma curves, you can apply a LUT to video output from the SDI terminal, VIDEO
terminal or viewfinder (
k
only). When a LUT is applied, the displayed image will look as if a standard gamma
curve were used, making it easier to check the image on the display device used. To check the image on an
external monitor, you will need a monitor that is compatible with the video’s color space.
Available LUT options by gamma curve
Available LUTs depend on the gamma curve used, whether it was set through one of the >
[ ! Custom Picture/HDR] > [Preset] settings or through the individual >
[ ! Custom Picture/HDR] > [Gamma] settings.
1 Open the [HDR/LUT] screen.
> [ ! Custom Picture/HDR] > [HDR/LUT]
2 Push the joystick up/down to select the desired output device or terminal.
3 Press the joystick.
4 Push the joystick left/right to select the desired LUT.
Available options depend on the output device or terminal, and the [ ! Custom Picture/HDR] >
[Preset] and [Gamma] settings.
Repeat steps 2 and 3 to select a LUT for a different output device or terminal.
The gamma curve and color space of the video output will change.
If a LUT is not needed, select [LUT: Off]
1
.
1
This option is available for the VIDEO terminal and viewfinder only when [HDR: Off] is selected.
Output by terminal/device and HDR setting
1
k
only.
[Gamma]
Available LUTs
[LUT: BT.709] [LUT: HDR Assist. (1600%)] [LUT: HDR Assist. (400%)] [LUT: ACESproxy]
[Canon Log 3] Ü Ü Ü Ü
[Canon Log] Ü
[Wide DR]
Operating modes:
1
2
4
5
3
6
7
1 Current gamma curve set through [Preset] or
[Gamma].
2 HDR setting
3 HDMI terminal output: Same as the gamma curve
set through [Preset] or [Gamma].
4 SDI terminal output
5 VIDEO terminal output
6 Viewfinder output
1
7SD card output
Connecting to an External Monitor or Recorder
156
Options
1
Available only for output from the VIDEO terminal and the camera’s viewfinder (
k
only).
2
Only when [ ! Custom Picture/HDR] > [Preset] is set to [Canon Log 3]. Available only for SDI output.
NOTES
When you apply the [LUT: ACESproxy] LUT to the SDI terminal, it will output ACESproxy video data. Using a
compatible monitor, you can perform on-set color grading and check the image after color correction as you
continue shooting.
If you set an assignable button to [LUT: All] (A 125), you can press the button to turn on and off the LUTs
applied to all output terminals/screens at once.
If you change the > [ ! Custom Picture/HDR] > [Preset] or [Gamma] setting, the LUT will be
deactivated and all the terminals’ output settings will be reset to [LUT: Off].
Superimposing Onscreen Displays on Screens/Video Outputs
You can choose to superimpose onscreen displays on the video output from the SDI terminal or HDMI OUT
terminal. Doing so will display the onscreen displays on an external monitor. This setting will not affect your
recordings.
1 Open the [OSD Output] submenu.
> [
¢
% Monitoring Setup]
1
> [OSD Output]
2 Select [On] and then press the joystick.
T
appears on the right of the screen (only if [
¢
%
1
Monitoring Setup] > [Custom Display 2] > [OSD
Output] is set to [On]).
1
l
Appears on the previous page in the menu.
NOTES
When the video output from the HDMI OUT terminal is 4K (3840x2160) recorded at 59.94P or 50.00P, the
onscreen displays will not be superimposed on the video.
If you set an assignable button to [OSD Output] (A 125), you can press the button to turn on and off the
superimposing of onscreen displays on video output.
Applied LUT
Output Settings with LUT applied
Description
Gamma curve Color space
[LUT: BT.709] Wide DR BT.709
LUT for viewing on the screen or external monitors compatible with BT.709
specifications.
[LUT: HDR Assist. (1600%)]
1
,
[LUT: HDR Assist. (400%)]
1
Original gamma
curve
BT.709
LUT for viewing HDR (high dynamic range) images on monitoring devices
connected to the VIDEO terminal. The LUT follows the BT.2100 transfer
function to convert a brightness range of 1600% or 400% respectively into
output the same as video displayed on an HDR-compatible display.
[LUT: ACESproxy]
2
ACESproxy ACESproxy
LUT for viewing on external monitors compatible with the ACESproxy
standard established by ACES (Academy Color Encoding System). The signal
output will use full range coding.
[LUT: Off] No LUT applied.
Operating modes:
157
Audio Output
Audio Output
The camera can output audio from the SDI terminal, HDMI OUT terminal,
×
(headphone) terminal or speaker*.
When recording with 4-channel audio, you can select which two channels of the 4 audio channels recorded with
the clip will be output from the terminals and speaker.
* Only monaural output is available for the speaker.
Audio output configuration
1
You can select the two channels to be output with the procedure below.
* Not available for the SDI terminal.
1 Open the audio channel selection submenu of the desired terminal.
> [
¡
$ Audio Setup]
1
> [Monitor Channels] (headphones or speaker) or [HDMI OUT Channels]
(HDMI OUT terminal)
1
For mode, page !.
2 Select the desired option and then press the joystick.
The audio channels selected for output will appear on the right of the screen (only when >
[
¢
% Monitoring Setup]
1
> [Custom Display 2] > [Monitor Channels] is set to [On]).
1
l
Appears on the previous page in the menu.
Options
All of the following settings are available for [Monitor Channels]; only [CH1/CH2] and [CH3/CH4] are available for
[HDMI OUT Channels].
* mode only. Not available when > [
Æ
" Recording/Media Setup] > [Audio Format (MP4)] is set to [AAC
16 bit 2CH].
NOTES
If you set an assignable button to [Monitor Channels] (A 125), you can press the button to toggle between
the audio channel output options.
Recorded audio configuration Audio output during recording/playback
Audio format
Audio bit depth or
bit rate
SDI terminal HDMI OUT terminal
1
4-channel
linear PCM
24 bit or 16 bit
4-channel
linear PCM
24 bit
2-channel
linear PCM
16 bit
2-channel MPEG-2
AAC-LC
256 kbps
Operating modes:
Setting
Audio output
L R
[CH1/CH2] CH1 CH2
[CH1/CH1] CH1 CH1
[CH2/CH2] CH2 CH2
[CH1+2/CH1+2] CH1+CH2 mixed CH1+CH2 mixed
[CH3/CH4]* CH3 CH4
[CH3/CH3]* CH3 CH3
[CH4/CH4]* CH4 CH4
[CH3+4/CH3+4]* CH3+CH4 mixed CH3+CH4 mixed
[CH1+3/CH2+4]* CH1+CH3 mixed CH2+CH4 mixed
*
Working with Clips on a Computer
158
Working with Clips on a Computer
Canon offers software applications as free downloads that allows you to save MP4 clips and XF-AVC clips
recorded with the camera on a computer, develop RAW clips, and more.
Saving MP4 Clips
You can use the software Data Import Utility to save your MP4 clips. Refer to PIXELA's website below (English
only) to download the software and for the latest information on it. For other inquires regarding the software,
consult a Canon Service Center.
http://www.pixela.co.jp/oem/canon/e/index_biz.html
Saving Clips Using Data Import Utility:
Save clips to the computer using an SD card reader.
Join relay clips (A 51) that were saved on separate SD cards and save them as a single clip.
Join multiple video stream files of a single clip split because of the 4 GB maximum file size restriction and save
them as a single clip.
For more details, including system requirements and how to install the software, check the Data Import Utility
Software Guide, a PDF file in the [\Manual] folder of the downloaded compressed file that contains the
software.
Saving XF-AVC Clips
You can use Canon XF Utility to save and organize XF-AVC clips on a computer and the Canon XF plugins to
easily use the clips directly from major non-linear editing (NLE) applications. The software and plugins are
available as free downloads from your local Canon Web site. Check the download page for the system
requirements and the latest information about the software.
You will find detailed instructions about installing and uninstalling the software in the “Read This First” PDF file
included in the compressed file you will download from the Web site. For details about using the software, refer
to the instruction manual (PDF file) that is installed with the software.
Canon XF Utility: Software application that allows you to save clips on a computer, check, play back and
organize clips and grab still frames from clips. The software is available for Windows and macOS (OS X).
Canon XF Plugin for Avid Media Access: Plugin that allows you to easily import clips from a recording media or a
local folder in the computer to the compatible version of Avid Media Composer (an NLE application compatible
with Avid Media Access), directly from within the application. The plugin is available for the Windows and macOS
(OS X) versions of Avid Media Composer.
159
Working with Clips on a Computer
Developing RAW Clips
Use the Cinema RAW Development software to develop RAW clips recorded on a CFast card. After you develop
the clips and export them to a full-quality standard file type such as DPX, they will be ready for color grading.
Alternatively, you can use the Canon RAW Plugin to easily use RAW clips unaltered (in RAW) directly from major
non-linear editing (NLE) applications. The software and plugin are available as free downloads from your local
Canon website. Check the download page for the system requirements and the latest information about the
software.
You will find detailed instructions about installing and uninstalling the software in the “Read This First” PDF file
included in the compressed file you will download from the website. For details about using the software, refer to
the instruction manual (PDF file) that is installed with the software.
Cinema RAW Development: Software application that allows you to develop, play back and export RAW clips.
The software is available for Windows and macOS.
Canon RAW Plugin for Avid Media Access: Plugin that allows you to easily import RAW clips from a storage
device or a local folder in the computer to the compatible version of Avid Media Composer (an NLE application
compatible with Avid Media Access), directly from within the application. The plugin is available for the Windows
and macOS versions of Avid Media Composer.
Canon RAW Plugin for Final Cut Pro X: Plugin that allows you to easily import RAW clips from a storage device to
Apple Final Cut Pro X, directly from within the application. The plugin is available for macOS.
Working with Clips on a Computer
160
7
161
Network Functions
About the Network Functions
You can connect the camera to a wireless network using Wi-Fi (A 162) or to a wired network using an Ethernet
cable (A 168).
Network functions and connection types
1
Connection to a Wi-Fi network via an external access point (wireless router, etc.)
2
Direct connection to one Wi-Fi-enabled device where the camera serves as the Wi-Fi access point.
Before using the network functions
The instructions in this chapter assume you already have a correctly configured and working network, network
device(s) and/or Wi-Fi access point. If necessary, refer to the documentation provided with the network
devices you plan to use.
Configuring the network settings requires adequate knowledge about configuring and using wired (Ethernet)
and/or wireless (Wi-Fi) networks. Canon cannot provide support regarding network configurations.
IMPORTANT
Data transmitted over networks is not encrypted.
Canon shall not be liable for any loss of data or damage resulting from incorrect network configuration or
settings. Additionally, Canon shall not be liable for any loss or damage caused by the use of network functions.
Using an unprotected Wi-Fi network can expose your data to monitoring by unauthorized third parties. Also,
the camera is shipped with some default passwords. Changing the initial settings is recommended.
NOTES
About the Wi-Fi antenna: When using the camera’s Wi-Fi functions,
do not cover the Wi-Fi antenna with your hand or other object.
Covering it may interfere with wireless signals.
When connecting the camera to a wireless network using Wi-Fi, we
recommend removing the camera grip to help ensure a stable
connection.
Do not open the card slot covers of any recording media while using
network functions.
Do not lay cables connected to the SDI terminal or HDMI OUT terminal
or unit cables near the Wi-Fi antenna. Doing so may negatively affect
the wireless communication over Wi-Fi.
Network function Description
Wired
network
Wi-Fi
A
Infrastructure
1
Camera Access
Point
2
Browser Remote
Control the camera remotely from the Web
browser of a connected device.
Ü Ü 170
FTP File Transfer
Transfer clips recorded with the camera to
another device connected to the network using
the FTP protocol.
Ü Ü 182
Wi-Fi antenna
Connecting to a Wi-Fi Network
162
Connecting to a Wi-Fi Network
The camera is Wi-Fi certified and can connect to a Wi-Fi network using an external access point
(wireless router) or can itself serve as a Wi-Fi access point. The camera can connect to wireless
routers (access points) and network devices compliant with the 802.11a/b/g/n protocol and that
are Wi-Fi certified (bear the logo shown on the right).
Note that using an unprotected Wi-Fi network can expose your data to monitoring by unauthorized third parties.
Be aware of the risks involved.
You can connect the camera to the network in Infrastructure mode, using an access point (wireless router etc.),
or in Camera Access Point mode, directly to a network device. The type of connection you can use, depends on
the network function you wish to use (A 161).
For an Infrastructure connection, the camera offers 4 ways to configure an access point and the method you use
will depend on the type and specifications of the access point and network you plan to use.
Camera Access Point: When shooting in a location where there are no access points available, the camera can
serve as a wireless access point*. Wi-Fi enabled devices will be able to connect to the camera directly.
* Limited only to the connection between the camera and supported Wi-Fi enabled devices. The functionality is not the same as
that of commercially available access points.
Infrastructure connection:
WPS (button): If your wireless router supports Wi-Fi Protected Setup (WPS), setup will be
easy and require minimal configuring and no passwords. To check if your wireless router
has a WPS button and for details about how to activate the Wi-Fi protected setup, refer to
the instruction manual of your wireless router.
WPS (PIN code): Even if your wireless router does not have a dedicated WPS button, it may support WPS using
a PIN code instead. For setup using a PIN code, you will need to know in advance how to activate the wireless
router’s WPS function. For details refer to the instruction manual of your wireless router.
Searching for Access Points: If your access point does not support the WPS function or you cannot activate it,
you can have the camera search for access points in the area.
Manual Setup: If the access point you want to use has stealth mode activated and it cannot be automatically
detected by the camera, you can enter all the necessary settings manually. This requires more advanced
knowledge of Wi-Fi and network settings.
IMPORTANT
Depending on the country/region of use, some restrictions on outdoor use or camera access point
connections may apply when operating the IEEE802.11a/n wireless standard in the 5 GHz band. For details
see REGIONS OF USE in the supplied Basic Guide.
163
Connecting to a Wi-Fi Network
Camera Access Point
In this mode the camera itself serves as a wireless access point to which other Wi-Fi-enabled devices can
connect. Follow the instructions on the screen to complete the procedure.
1 Open the connection method selection submenu.
> [ ! Network Settings] > [Connection Settings] > select the desired configuration number* >
[Edit]
* You can save up to 4 network configuration profiles in the camera. Push the joystick up/down to select the configuration number.
2 Select [Camera Access Point] and then press the joystick.
3 To enter the [SSID] (network name), select [Input] and then press the joystick.
Enter the SSID (network name) the camera will use as a Wi-Fi access point using the keyboard screen
(A 35).
The network name is needed to connect the network device to the camera. If necessary, write it down.
After entering the network name, select [OK] and then press the joystick.
4 Select the frequency band for the Wi-Fi connection.
[5 GHz] or [2.4 GHz] > press the joystick.
For Europe: Because only the 2.4 GHz frequency band is available for Camera Access Point mode, skip to
step 5.
5 Select the channel and then press the joystick.
Available channels will be different depending on the wireless connection mode selected in the previous
step.
6 Select the encryption method and then press the joystick.
If you selected [Open/No encryption], skip to step 8. If you selected [WPA2-PSK/AES], continue with step 7.
7 Enter the password of the access point.
Enter the desired text using the keyboard screen (A 35).
This encryption key (password) is needed to connect the network device to the camera. If necessary, write it
down.
8 Continue with the procedure to configure the IP address assignment (A 163).
Configuring the IP Address Settings
At this point you need to configure the TCP/IP settings for the camera to be able to connect to a Wi-Fi network.
If you need to configure the TCP/IP settings manually, consult the network administrator to obtain the relevant
information.
1 Select the method for assigning the IP address: Select [Automatic] or [Manual] and then press the
joystick.
If you selected [Automatic], the IP address will be assigned automatically. Continue with the procedure to
review and save the configuration (A 164).
2 Enter the IP address.
Push the joystick up/down to select a value for the first field and then press the joystick to move to the next field.
After completing the four fields of an address, select [Set] and then press the joystick to confirm the address.
3 Enter the [Subnet Mask] in the same way.
For Camera Access Point connections, the rest of the procedure is not necessary. Continue with the
procedure to review and save the configuration (A 164).
4 Enter the [Default Gateway], [Primary DNS Server] and [Secndry DNS Server] using the method
described in step 2.
After entering the secondary DNS server, continue with the procedure to review and save the configuration
(A 164).
Connecting to a Wi-Fi Network
164
Saving the Configuration
1 Review the access point’s configuration and then press the joystick.
Push the joystick left/right to review additional settings before pressing the joystick.
2 To change the [Network Configuration Name], select [Input] and then press the joystick.
If you wish, you can give the network configuration profile a more descriptive name to make it easier to
identify. Enter the desired name using the keyboard screen (A 35).
3 Select [OK] and then press the joystick to save the network configuration.
4 When the confirmation screen appears, press the joystick.
Connecting in Infrastructure Mode
1 Open the connection method selection submenu.
> [ ! Network Settings] > [Connection Settings] > select the desired configuration number* >
[Edit]
* You can save up to 4 network configuration profiles in the camera. Push the joystick up/down to select the configuration number.
2 Select [Infrastructure] and then press the joystick.
3 Select the desired network setup method and then press the joystick.
Continue the setup with the procedure corresponding to the method you wish to use (see the reference
pages below).
[WPS: Button] (A 165)
[WPS: PIN Code] (A 165)
[Search for Access Points] (A 166)
[Manual] (A 167)
165
Connecting to a Wi-Fi Network
Wi-Fi Protected Setup (WPS)
Wi-Fi Protected Setup (WPS) is the easiest way to set up a Wi-Fi access point. You can do simply by pushing a
button (if the access point (wireless router) you want to connect to has a WPS button) or using a PIN code
issued by the camera.
Wireless Routers with a WPS Button
1 Press and hold the WPS button on the wireless router.
The length of time required to hold down the WPS button depends on the wireless router. Refer to the
instruction manual of your wireless router and make sure the wireless router’s WPS function is activated.
2 Within 2 minutes, press the joystick.
While [Connecting] appears on the screen, you can press the joystick to cancel the operation.
3 Continue with the procedure to configure the IP address assignment (A 163).
NOTES
The [WPS: Button] method may not work correctly if there are several active access points in the area. In such
case try using [WPS: PIN Code] or [Search for Access Points] (A 166) instead.
WPS using a PIN code
1 After you select [WPS: PIN Code], the camera will generate and display an 8-digit PIN code on the
screen.
2 Enter the PIN code into the wireless router’s WPS (PIN code) setup screen.
For most wireless routers, you must use a Web browser to access the setup screen.
For details about how to access your wireless router’s settings and activate the Wi-Fi Protected Setup
(WPS) using a PIN code, refer to the instruction manual of your wireless router.
3 Within 2 minutes, press the joystick.
While [Connecting] appears on the screen, you can press the joystick to cancel the operation.
After the connection is correctly established, the screen to configure the IP address will appear.
4 Continue with the procedure to configure the IP address assignment (A 163).
Connecting to a Wi-Fi Network
166
Searching for Access Points
The camera will automatically detect access points in the vicinity. After you select the desired access point, you
only need to enter the selected network’s password to connect the camera. For details about the access point’s
network name (SSID) and password refer to the wireless router’s instruction manual or consult the network
administrator in charge of the access point.
1 After you select [Search for Access Points], the camera will search for active access points in the
vicinity and display a list of available options on the screen.
2 Push the joystick up/down to select the desired access point and then press the joystick.
3 If necessary, select the WEP index key.
This step is only necessary if the Wi-Fi network’s authentication method is set to [Shared Key] or if the
encryption method is set to [WEP].
4 To enter the [Encryption Key] (password), select [Input] and then press the joystick.
Enter the password of the selected Wi-Fi network using the keyboard screen (A 35).
5 Continue with the procedure to configure the IP address assignment (A 163).
Network name (SSID)
Current access point/Total number
of active access points detected
Encrypted access point
167
Connecting to a Wi-Fi Network
Manual Setup
If you prefer, you can enter manually the details of the Wi-Fi network you want to connect to. Follow the
instructions on the screen to complete the procedure.
1 To enter the [SSID] (network name), select [Input] and then press the joystick.
Enter the SSID (network name) of the selected Wi-Fi network using the keyboard screen (A 35).
The network name is needed to connect the network device to the camera. If necessary, write it down.
After entering the network name, select [OK] and then press the joystick.
2 Select the Wi-Fi network’s authentication method and then press the joystick.
If you selected [Shared Key], skip to step 4.
3 Select the Wi-Fi network’s encryption method and then press the joystick.
If the authentication method is [Open], you can select [WEP] and continue to step 4, or [No Encryption] and
skip to step 6.
If the authentication method is [WPA-PSK] or [WPA2-PSK], you can select [TKIP] or [AES].
4 If necessary, select the WEP index key.
5 To enter the [Encryption Key] (password), select [Input] and then press the joystick.
Enter the password of the selected Wi-Fi network using the keyboard screen (A 35).
6 Continue with the procedure to configure the IP address assignment (A 163).
NOTES
Valid passwords vary depending on the encryption method.
64-bit WEP encryption: 5 ASCII characters or 10 hexadecimal characters.
128-bit WEP encryption: 13 ASCII characters or 26 hexadecimal characters.
AES / TKIP encryption: 8 to 63 ASCII characters or 64 hexadecimal characters.
* Note: ASCII characters include the numbers 0 to 9, the letters a to z and A to Z and some punctuation marks and special
symbols. Hexadecimal characters comprise the numbers 0 to 9 and the letters a to f and A to F.
Connecting to a Wired (Ethernet) Network
168
Connecting to a Wired (Ethernet) Network
Connect the camera to a router or other device connected to a wired (Ethernet) network using a commercially
available Ethernet cable. Use Category 5e, shielded twisted pair (STP) Ethernet cables compatible with Gigabit
Ethernet (1000BASE-T) and with good shielding capability.
1 Connect a commercially available Ethernet cable to the (Ethernet) terminal on the camera and an
Ethernet port on a network device.
2 Open the connection method selection submenu.
> [ ! Network Settings] > [Connection Settings] > select the desired configuration number* >
[Edit]
* You can save up to 4 network configuration profiles in the camera. Push the joystick up/down to select the configuration number.
3 Select [Ethernet] and then press the joystick.
4 Continue with the procedure to configure the IP address assignment (A 163).
(Ethernet) access indicator
Ethernet cable
(commercially available)
Ethernet port on a
network device
169
Selecting a Network Connection
Selecting a Network Connection
You can save up to 4 network configuration profiles. If you just saved a new network configuration, it will already
be automatically selected so follow this procedure to select a different configuration profile.
1 Open the [Connection Settings] screen.
> [ ! Network Settings] > [Connection Settings]
2 Select the desired configuration number and then press the joystick.
3 Select [OK] and then press the joystick.
Checking and Changing Network Settings
You can check and, if necessary, edit the settings of the currently selected network configuration profile even
after the initial setup. Changing settings manually requires more advanced knowledge of Wi-Fi and network
settings.
1 Open the configuration profile selection submenu.
> [ ! Network Settings] > [Connection Settings]
2 Select the desired configuration number and then press the joystick.
3 Select [Edit] and then press the joystick.
4 Select [Infrastructure], [Camera Access Point] or [Ethernet].
Continue with the procedure corresponding to the network connection method being used.
- For infrastructure connections, follow the procedure for
Connecting in Infrastructure Mode
starting from
step 3 (A 164).
- For camera access point connections, follow the procedure for
Camera Access Point
starting from step 3
(A 163).
- For Ethernet connections, follow steps 1 and 4 of the procedure for
Connecting to a Wired (Ethernet)
Network
(A 168).
Browser Remote: Controlling the Camera from a Network Device
170
Browser Remote: Controlling the Camera from a Network Device
After connecting the camera to a network (Wi-Fi or wired using the (Ethernet) terminal), you can operate the
camera remotely via Browser Remote, a Web browser application that can be accessed using the Web browser
on network devices* (via Wi-Fi or with an Ethernet connection). Using Browser Remote, you can check the
camera’s live view image and control various recording settings. On the Browser Remote screen, you can also
check the remaining recording time on the recording media, power source levels and the camera’s time code.
* For details about compatible devices, operating systems, Web browsers, etc., please visit your local Canon website.
Setting Up Browser Remote
You can set a unique camera identification code and designate the port that the Browser Remote application
should use when accessing the camera through network. The port number (HTTP protocol) used by Browser
Remote is usually set to port 80, but you can change it if necessary. The camera ID will appear on the Browser
Remote screen, making it easy to identify which camera the application is controlling in case of a multi-camera
shooting setup.
Changing the Port Number and Camera ID
1 Open the [Browser Remote Settings] submenu.
> [ ! Network Settings] > [Browser Remote Settings]
2 To change the port number, select [Port No.] and then press the joystick.
To change the camera ID, skip to step 5.
3 Push the joystick left/right to select the digit to change and then push the joystick up/down to
change the value.
Repeat this step as necessary to change the other digits.
4 Select [Set] and then press the joystick to confirm the port number.
5 To change the camera ID, select [Camera ID] and then press the joystick.
Enter the desired camera ID using the keyboard screen (A 35).
6 Select [OK] and then press the joystick.
User Settings
A user name and password are required before the Browser Remote application can access and operate the
camera. You can set up to three different users and select whether you want to allow single-user operation
(full control) or two-user operation (one controlling camera functions and another in charge of metadata input for
XF-AVC clips).
[Full] Can access all 3 Browser Remote screens: [
v
] (main recording screen), [ ] (metadata screen) and
[ ] (basic screen).
[Camera] Can access only the [
v
] (main recording) screen. This would be the main operator controlling the
camera.
[Meta] Can access only the [ ] (metadata) screen. This would be the person in charge of keeping the
XF-AVC clip information up to date.
Operating modes:
171
Browser Remote: Controlling the Camera from a Network Device
Starting Browser Remote
After connecting the camera to the network, you can start the Browser Remote application on the Web browser*
of any network device** connected to the same network. You can check the Browser Remote settings on the
status screen (A 195).
* A Web browser that supports JavaScript and is enabled to accept cookies is required.
** For details about compatible devices, operating systems, Web browsers, etc., please visit your local Canon website.
Preparations on the camera
1 Set an assignable button to [Status] in advance (A 125).
2 Connect the camera to the desired network (A 169).
Use a Camera Access Point connection (A 163) or Ethernet connection (A 168).
3 Activate Browser Remote on the camera.
> [ ! Network Settings] > [Activate] > [Browser Remote]
With Camera Access Point connections, the camera will start functioning as a wireless access point. With
Ethernet connections, connect the camera to the desired network using an Ethernet cable.
and the connection type icon will appear at the top of the screen. When the icons turn white, the
camera is ready to accept commands from the Browser Remote application.
4 If necessary, you can check the network settings while Browser Remote is activated.
Press the assignable button to open the status screens and push the joystick left/right to display the
[Network] status screens to check the following settings.
- [Network 1/5]: SSID for Camera Access Point connections
- [Network 4/5]: URL for Browser Remote
- [Network 5/5]: User name and password settings for Browser Remote (only the default password will be
displayed)
Press the assignable button to close the status screen.
On the connected network device
1 Connect the network device to the camera.
With Camera Access Point connections, select the camera’s SSID (network name) in the Wi-Fi settings and
use the password from step 4 above. With Infrastructure and Ethernet connections, connect the device to
the same access point as the camera.
2 Start the Web browser on the network device.
Operating modes:
Browser Remote: Controlling the Camera from a Network Device
172
3 Enter the camera’s URL exactly as shown on the Browser Remote information screen.
Enter the URL you checked previously into the Web browser’s address bar.
4 Enter the user name and password.
Be sure to log in with the user name and password of one of the users that were set on the camera
(A 170). If necessary, consult the administrator who configured the camera’s settings.
The Browser Remote screen will appear. The screen displayed will differ depending on the user information
used to log in.
While Browser Remote is correctly connected to the camera, the network connection indicator’s will
turn on one by one and then turn off in an endless loop.
The camera’s ID and lens information will appear on the Browser Remote screen while live view is not
activated.
5 Select the language for Browser Remote.
Click/touch the language selection icon and select the desired language from the list.
Most buttons and controls emulate physical controls on the camera and are labeled in
English only, regardless of the language selected.
6 Use the Browser Remote controls to operate the camera.
Descriptions of the controls are given in the following pages. Detailed operation is given
in each function’s reference page.
7 When you have finished using Browser Remote, turn it off on the camera
> [ ! Network Settings] > [Activate] > [Off]
The network icons will turn yellow and then disappear from the screen and the
connection with the application will be terminated.
Language selection
Camera ID and lens
information
Network connection
indicator
173
Browser Remote: Controlling the Camera from a Network Device
NOTES
The live view image will not be displayed in Browser Remote while color bars are displayed on the camera.
Depending on the network used and the strength of the Wi-Fi signal (for Wi-Fi connections), you may notice
delays in the refreshing of the live view image and other settings.
If Browser Remote is set to a language other than the language set on network device, the application may not
be displayed correctly.
Using Browser Remote
The Browser Remote application has 3 screens: [
v
] the main screen for controlling the camera remotely in
recording mode, [ ] the metadata screen, and [ ] a basic screen that allows users only to start/stop recording
using a smartphone or other device with a small screen. The screen displayed will differ depending on the user
information used to log in.
The following sections explain how to use the Browser Remote controls. For detailed information and applicable
restrictions about the functions themselves, please refer to each function’s explanation.
NOTES
Browser Remote does not support multi-touch gestures.
The Main Remote Recording Screen [
v
]
* [Full]/[Camera] users only.
When using a computer, tablet and other devices with larger screens, this screen offers all the controls available
for operating the camera remotely via Browser Remote.
* Onscreen display/indication only. The content or value cannot be changed using Browser Remote.
768
10
*
11912131514
*
1
*
3
4
5
2
*
Browser Remote: Controlling the Camera from a Network Device
174
1 Live view screen
Shows the camera’s live view image. When the live view image is not turned on, the camera ID and lens
information will appear here.
2 Status indicators
3 [LIVE VIEW] button
Touch the button to display the camera’s live view image on the Browser Remote screen.
4 Clip marks and shot marks buttons
When recording, you can flag important frames in a clip by adding shot marks or tag important clips by
adding clip marks (A 108).
To add a shot mark
: While recording a clip, touch [Shot Mark].
To add a clip mark: After recording a clip, touch [ Mark] to add an $ mark to the clip, or [ Mark] to add
a % mark to the clip.
NOTES
Depending on the Wi-Fi connection’s strength, there may be delay of 0.5 seconds or more between the
frame shown when you touch/click the button and the frame to which the camera adds the shot mark.
5[
D
Touch Focus] button
Touch the button to unlock (enable) the touch focus mode.
6 Browser Remote screen selection ([Full] user only)
Touc h [
v
] to open the main remote recording screen, [ ] to open the metadata screen (A 179) or [ ] to
open the basic screen for devices with a small screen (A 181).
7 Language selection
Most of the application’s controls emulate physical buttons on the camera and appear in English only,
regardless of the language selected.
8 Key lock button
Touch the icon to lock the Browser Remote screens in order to prevent settings from being changed
inadvertently.
9 [REC] button
Touch the button to start recording. While recording, the center of the button turns red.
Touch the button again to stop recording.
10 Recording media selection and approximate remaining recording time
The currently selected recording media is indicated with a
Ð
mark next to the icon.
Remaining recording times are approximate and calculated based on the current video configuration used.
11 [SLOT SELECT] button
Touch the button to select the other SD card when both SD card slots contain a SD card.
: Wi-Fi connection indicator. While Browser Remote is correctly connected to the camera, the
dots will keep turning on and off in a loop.
STBY, etc. : Recording operation (same as on the camera, A 59).
STBY
`
, REC
`
: Output recording command (A 188).
4
: Appears during double slot recording (A 51).
è
, etc. : Remaining battery charge (A 60)
175
Browser Remote: Controlling the Camera from a Network Device
12 Current camera settings
This panel displays an overview of the camera settings currently used. You can change camera settings with
the controls in the detailed camera settings panel (14) on the right.
13 Recording format (A 64)
14 Time code (same as on the camera)
15 Detailed camera settings panel (A 175)
Touch one of the tabs at the bottom to select the camera settings you wish to adjust:
The Main Remote Recording Screen: Detailed Camera Settings
The following sections explain how to use the controls in the detailed camera settings panel. For detailed
information and applicable restrictions about the functions themselves, please refer to each function’s
explanation.
To change the white balance
Touch the [White Balance] tab in the detailed camera settings panel.
1 Auto white balance button
Touch [ ] to set the camera to auto white balance (AWB) mode.
2 Custom white balance buttons
Touch [
Å
A] or [
Å
B].
To register a custom white balance: Point the camera at a gray card or
white object with no pattern so it fills the center of the monitoring/live
view screen and touch [
Å
]. Use the same lighting conditions you plan
to use when recording.
During the procedure, the icon in the button will flash quickly. When it
stops flashing, the procedure is completed and the custom white
balance will be applied.
3 Preset and user-set white balance settings
Touch a button to apply the corresponding white balance settings as
shown in the button.
4 [AWB Lock] button
When auto white balance is activated, touch the button to lock the current white balance settings and keep
them when you change the subject.
To adjust the color temperature or color compensation (CC) value
Select a white balance setting other than [ ], [
Å
A] or [
Å
B].
1 Touch the right part of the white balance button (current color temperature and CC value).
2 Touch the [K] tab (color temperature) or [CC] tab (color compensation value) and select the desired value from
the list.
If necessary, repeat this step to adjust the other setting.
[ND]: ND filter [WB]: White balance
[ISO]/[Gain]: ISO speed or gain value [Iris]: Aperture value
[AE]: AE shift [Shutter]: Shutter speed
[White Balance]: White balance mode and related settings.
[Exposure]: Exposure related settings—aperture, shutter speed and ISO/speed gain.
[Focus]: Focus related settings.
[Zoom]: Zoom operation (only when using a compatible lens, A 229).
1
4
2
3
Browser Remote: Controlling the Camera from a Network Device
176
To change exposure related settings
Touch the [Exposure] tab in the detailed camera settings panel.
1 ND Filter buttons
To use the extended ND range options, touch [Extended Range On] or
[Extended Range Off].
Touch [–] or [+] to change the density of the ND filter (displayed above
the buttons). You can also touch the current ND filter setting and select
the desired setting from a list of options.
2 Aperture related buttons (only when using a compatible lens, A 229)
To let the camera adjust the aperture automatically, touch [Manual] and
select [Automatic] instead. No further settings are necessary.
To adjust the aperture manually, select [Manual] and use the aperture-
related controls as described below.
To change the adjustment increment, touch [1/3] and select the desired
iris increment ([1/2], [1/3], [1/2 Fine] or [1/3 Fine]). With [1/2 Fine] or [1/3
Fine] you can use the smallest aperture increment allowed by the lens.
(However, the aperture value displayed will be the closest value in the selected increment scale.)
Touch [–] or [+] to change the aperture value (displayed above the buttons). You can also touch the current
aperture value and select the desired value from a list of options.
When an EF Cinema lens is attached to the camera, the aperture value will appear as a T value.
During manual aperture adjustment, you can also touch [PUSH AUTO IRIS] to have the camera adjust the
aperture automatically once. (The manual aperture buttons will not be available at this time.)
When using an EF Cinema lens with the built-in extender function activated, you cannot change the
aperture by selecting an aperture value.
3 ISO speed/Gain related buttons
ISO speeds are displayed by default. To adjust the gain instead, touch [ISO] and select [Gain].
To use the ISO speeds/gain values in the extended range, touch [Extended Range On] or [Extended Range
Off].
To change the adjustment increment, touch [1/3] (ISO speed) or [Normal] (gain) and select the desired ISO
increment ([1/3] or [1]) or gain increment ([Normal] or [Fine]).
Touch [–] or [+] to change the ISO speed/gain value (displayed above the buttons). You can also touch the
current ISO speed/gain value and select the desired value from a list of options.
4 Shutter speed related buttons
To change the shutter speed mode, touch [Angle] and select the desired shutter speed mode ([Speed]
(standard shutter speed), [Angle], [Clear Scan], [Slow] (slow shutter speeds), or [Off]).
To change the adjustment increment if you selected [Speed], touch [1/3] and select the desired increment
([1/3] or [1/4]).
Touch [–] or [+] to change the shutter speed (displayed above the buttons). You can also touch the current
shutter speed value and select the desired value from a list of options.
5 AE shift buttons
Touch [–] or [+] to change the AE shift level.
5
2
1
2
3
4
177
Browser Remote: Controlling the Camera from a Network Device
To adjust the focus and use focus-related functions
Touch the [Focus] tab in the detailed camera settings panel. To use the following
functions, make sure that the focus mode on the lens is set to automatic
(
A
80).
If the focus mode on the lens is set to manual, you will not be able to use
Browser Remote to control the focus. Depending on the lens used, remote
operation may not work correctly.
1 AF mode button
2 AF frame position button
Touch the button to select the position of the AF frame. Select [Center
Frame] for a fixed AF frame at the center of the live view screen, or
[Selectable] to be able to touch the live view screen to select where to
focus (A 178).
3 Face AF mode button
Touch the button to select how the camera will focus when the Face AF
function is activated and no face is detected (A 87).
4 [AF Speed] button
Touch the button to select the adjustment speed of applicable lenses when using autofocus functions.
5 [Face Detection] button
6 [Focus Guide] (Dual Pixel Focus Guide function) button
7 [ONE-SHOT AF] button (A 177) / [AF Lock] button (A 178)
8 Tracking buttons
9 Manual focus buttons
Manual focus
1 Touch the AF mode button and select [One Shot].
2 Touch one of the manual focus buttons on the [Near] side to focus closer or one of the controls on the [Far]
side to focus farther away. There are three levels of adjustment - [ ]/[ ] is the smallest and [ ]/[ ] the
largest.
Focus Guide
1 Touch the [Focus Guide] button.
2 Touch [On] to display the focus guide (A 82).
Only one focus guide frame can be displayed on the Browser Remote live screen. If the focus guide is
activated and the secondary focus guide frame is activated on the camera, the face detection and tracking
functions cannot be used.
One-shot AF
1 Touch the AF mode button and select [One Shot].
2 Touch the [ONE-SHOT AF] button.
A white AF frame will appear on the live view screen and the camera will focus automatically.
When correct focus has been achieved, the AF frame turns green. If the camera cannot focus automatically,
the AF frame will turn red.
When the AF frame position is set to [Selectable], you can touch inside the live view screen to select where
to focus (A 178).
If necessary, touch [AF Speed] to change the adjustment speed of the autofocus function.
1
2
3
4
5
6
7
8
9
Browser Remote: Controlling the Camera from a Network Device
178
AF-Boosted MF
1 Touch the AF mode button and select [AF-Boosted MF].
When the focus is in the manual adjustment range, a yellow focus frame will appear on the live view screen.
When the AF frame position is set to [Selectable], you can touch inside the live view screen to select where
to focus (A 178).
2 Touch one of the manual focus buttons to focus closer ([Near] side) or farther ([Far] side) as necessary.
When the focus enters the automatic adjustment range, the focus frame will turn white and the camera will
then finish focusing automatically.
When the focus is not in the automatic adjustment range or when the focus is locked with AF lock, you can
focus manually.
If necessary, touch [AF Speed] to change the adjustment speed of the autofocus function.
During AF-boosted MF mode, the [ONE-SHOT AF] button will change to [AF Lock].
Continuous AF
1 Touch [AF Speed] to change the adjustment speed of the autofocus function.
2 Touch the AF mode button and select [Continuous].
A white AF frame will appear on the live view screen and the camera will focus automatically.
When the AF frame position is set to [Selectable], you can touch inside the live view screen to select where
to focus (A 178).
During continuous AF mode, the [ONE-SHOT AF] button will change to [AF Lock]. Touch the [AF Lock]
button to lock the focus at its current position and frame the picture as necessary. Touch the button again to
release the AF lock.
When the focus is locked with AF lock, you can focus manually.
Touching the screen to focus on a subject
You can touch on a subject that appears in the Browser Remote’s live view screen in order to select it for
focusing.
1 Touch the AF frame position button and select [Selectable].
2 Make sure the touch focus function has been unlocked and the
D
icon appears in the button (A 174).
3 Touch the desired subject in the live view screen.
Depending on the focus mode used, a frame may appear on the selected subject and the camera may also
focus on the subject automatically and even start tracking the subject.
Face AF
When the face detection function is activated, the camera will detect people’s faces and track the main subject
even when it moves. You can use face detection with one of the autofocus functions to let the camera focus on
the main subject automatically (Face AF).
1 Touch [Face Detection] and select [On].
2 If necessary, touch the Face AF mode button and select [Face Only] or [Face Priority].
A face detection frame will appear on the live view screen around all detected faces. The main subject is
indicated with arrows (
Þ
) on the sides. The camera will track the main subject as it moves.
Touch on the face of a different subject to select it as the main subject.
During continuous AF, the camera will keep focusing on the main subject’s face. During one-shot AF, the
camera will focus on the main subjects face when you touch [ONE-SHOT AF].
179
Browser Remote: Controlling the Camera from a Network Device
Tracking other subjects
In addition to Face AF, you can have the camera track other moving subjects that are not faces and also
combine the tracking function with one of the autofocus functions to let the camera focus on the desired subject
automatically.
1 Touch [Tracking].
2 Touch the live view screen to select the subject you wish to track.
A tracking frame will appear on the live view screen and the camera will track the subject as it moves.
During continuous AF, the camera will keep focusing on the selected subject. During one-shot AF, the
camera will focus on the selected subject when you touch [ONE-SHOT AF].
Touch [Cancel Tracking] to select a different subject, or touch [Tracking] again to end the tracking function.
To adjust the zoom
The zoom can be adjusted only when an EF Cinema lens compatible with
zoom adjustment or an EF lens compatible with the optional PZ-E1 Power
Zoom Adapter is attached to the camera.
1 Set the lens’s zoom operation change-over knob to SERVO.
If you are using the PZ-E1, set the zoom mode switch to PZ (Power
Zoom).
2 Touch the [Zoom] tab in the detailed camera settings panel.
3 Drag the zoom slider up/down to zoom in [
T
] or out [
W
], respectively.
NOTES
If you operate the zoom slider slowly it may take some time until the lens
starts moving.
The Metadata Screen [ ]
* [Full]/[Meta] users only.
Using Browser Remote you can create, edit and transfer to the camera a metadata profile that can be
embedded with the recorded clips. This metadata profile includes the user memo information (clip title, creator,
location and description), as well as GPS information. For details, refer to
Using Metadata
(A 109).
To open the metadata screen, touch the [ ] icon at the top of the Browser Remote screen.
Zoom
slider
Browser Remote: Controlling the Camera from a Network Device
180
1 Clip title
Touch/click inside the text box and enter the desired text. To delete the text, touch [Clear All].
2 GPS information
To enter the altitude: Touch inside the [Altitude] text box and enter the desired value.
To enter the latitude
: Touch inside one of the text boxes and enter (from left to right) the degrees, minutes and
seconds values. To select a southern latitude, touch [North] and select [South] instead.
To enter the longitude
: Touch inside one of the text boxes and enter (from left to right) the degrees, minutes
and seconds values. To select a western longitude, touch [East] and select [West] instead.
Touch [Clear All] to delete all the GPS-related fields at once.
3 Live view screen
Shows the camera’s live view image. When the live view image is not turned on, the camera ID and lens
information will appear here.
The live view image will be turned off automatically while the camera is displaying color bars.
4 [LIVE VIEW] button
Touch the button to display the camera’s live view image on the Browser Remote screen.
5 Clip’s creator
6 Recording location
7 Description of the clip
Touch inside the text box and enter the desired text. To delete the text, touch [Clear All].
8 Status indicators
See the descriptions in the section about the [v] screen (A 174).
9 [ Activate] button
Touch the button to give priority to the metadata entered in this screen when recording clips. This overrides
the metadata read from a file saved on the SD card.
981011
1
3
4
2
5
6
7
181
Browser Remote: Controlling the Camera from a Network Device
10 [Overwrite Previous] button/[Overwrite] button
While recording: Touch [Overwrite] to send the metadata entered in this screen to the camera, replacing any
metadata that the clip being recorded might have.
After recording a clip
: Touch [Overwrite Previous] to send the metadata entered in this screen to the camera,
replacing any metadata embedded in the last clip recorded.
11 [Apply from Next] button
Touch the button to send the metadata entered in this screen to the camera so it is embedded only with clips
that are recorded after the transfer. This option does not overwrite the metadata of clips already recorded or
being recorded.
NOTES
The metadata sent to the camera from Browser Remote will be lost in the following cases.
- If the camera was turned off.
- If the > [3 $ Recording/Media Setup] > [Metadata] > [Setting] setting was changed.
Using Browser Remote ([ Activate] button), you can give priority to metadata sent from the application.
However, you cannot return the priority back to the SD card. To use a user memo file saved on the SD card
you will need to set > [3 $ Recording/Media Setup] > [Metadata] > [Setting] to [SD Card] on
the camera itself.
Metadata sent to the camera from Browser Remote will not be added to relay clips recorded before the switch
to the current CFast card.
The Basic Screen [ ]
When using a smartphone or other device with a smaller screen, this screen
offers only a small live image screen for final confirmation and the [REC] button
to start and stop recording.
To open the basic screen, touch the [ ] icon at the top of the Browser
Remote screen.
FTP File Transfer
182
FTP File Transfer
You can transfer MP4 or XF-AVC clips from the camera to another device connected to the network, using the
FTP protocol.
The following explanations assume that the FTP server is on, ready and correctly configured.
Preparations
Before you can transfer clips to a connected device, you need to configure the FTP server settings and other
settings related to the handling of folders and files. If necessary, consult the network administrator in charge of
the FTP server.
FTP Server and Transfer Settings
1 Open the [FTP Server] submenu.
> [ ! Network Settings] > [FTP Transfer Settings]
2 Enter the destination FTP server.
Enter the FTP server’s IP address or host name using the keyboard screen (A 35).
3 Enter the [FTP: User Name], [FTP: Password], and [Destination Folder] in the same way.
4 Select [Port No.] and press the joystick to change the port number.
Enter the port number using the keyboard screen (A 35).
5 Select whether to activate the passive mode.
[Passive Mode] > [On] or [Off] > Press the joystick
[Off] is the standard setting for most cases. [On] (passive mode) is more appropriate for FTP transfers within
a network behind a firewall.
6 Select whether to create a new folder for every transfer date.
[New Folder by Date] > [On] or [Off] > Press the joystick
7 Select how to handle file transfers when a file with the same name already exists on the server.
[Same Named Files] > Desired option > Press the joystick
Options for [New Folder by Date]
[On]: A new subfolder under the transfer destination folder “YYYYMMDD\HHMMSS” will be created
for every transfer operation.
[Off]: All the files will be transferred to the folder set as [Destination Folder] in the FTP server settings.
Options for [Same Named Files]
[Skip]: If a file with the same name already exists in the destination folder, the file will not be transferred.
[Overwrite]: Even if a file with the same name already exists in the destination folder, the file will be
transferred, overwriting any file with the same name in the destination folder.
Operating modes:
183
FTP File Transfer
Transferring Clips (FTP Transfer)
After you record proxy clips to an SD card, you can transfer them to the FTP server. You can check the FTP-
related settings on the status screens (A 195).
Transferring a Single Clip
1 Connect the camera to the desired network (A 169).
Use an Infrastructure connection (A 164) or Ethernet connection (A 168).
With Ethernet connections, connect the camera to the desired network using an Ethernet cable.
2 Select the desired clip and then press the joystick.
The clip menu will appear.
3 Select [FTP Transfer] and then press the joystick.
4 Select [OK] and then press the joystick.
Press the CANCEL button to cancel the operation.
will appear on the top of the screen, next to the connection type icon.
When the connection is established, the icons will change from yellow to white.
When the icons turn white, the clip will be transferred to the FTP server.
While the clip is being transferred, you can press the joystick to cancel.
When the transfer is completed, the network icons will turn yellow and then disappear from the screen.
5 When the confirmation message appears, press the joystick.
Transferring Multiple Clips
1 Open the desired index screen (A 140).
2 Connect the camcorder to the desired network (A 169).
Use an Infrastructure connection (A 164) or Ethernet connection (A 168).
With Ethernet connections, connect the camera to the desired network using an Ethernet cable.
3 Open the [FTP Transfer] submenu.
[ ! Network Settings] > [FTP Transfer]
4 Select [Select] to select which clips to transfer, or [All] to transfer all the clips and then press the
joystick.
If you selected [Select], use the joystick to move between the clips. Press the joystick to select a clip to
transfer and repeat as necessary. After selecting all the desired clips, press the MENU button.
5 Select [OK] and then press the joystick.
will appear on the top of the screen, next to the connection type icon.
When the connection is established, the icons will change from yellow to white.
When the icons turn white, all the applicable clips will be transferred to the FTP server.
Press the CANCEL button to cancel the operation.
While the clips are transferred, you can press the joystick to cancel.
When the transfer is completed, the network icons will turn yellow and then disappear from the screen.
6 When the confirmation message appears, press the joystick.
FTP File Transfer
184
IMPORTANT
Observe the following precautions when transferring files. Failing to do so may interrupt the transfer and
incomplete files may remain at the transfer destination.
- Do not open the SD card slot cover.
- Do not remove the power source or turn off the camera.
If incomplete files remain at the transfer destination, check the content and make sure they are safe to delete
before deleting them.
NOTES
Depending on the access point’s settings and capabilities, it may take some time to transfer files.
8
185
Additional Information
Menu Options
For details about how to select an item, refer to
Using the Menus
(A 33). A menu item’s location within a menu
is indicated by the page number icon (!", etc.) in the left column. For details about each function, see the
reference page or the explanation accompanying the menu entry. Setting options in boldface indicate default
values.
Depending on the camera’s operating mode and the settings, some menu items may not be available. Such
menu items do not appear or appear grayed out in menu screens.
To skip directly to the page of a specific menu:
[
v
Camera Setup] menu ( mode only)
[
v
Camera Setup] menu A 185
[ Custom Picture/HDR] menu A 186
[
3
Recording/Media Setup] menu A 187
[
¡
Audio Setup] menu A 188
[
¢
Monitoring Setup] menu A 189
[
A
Assistance Functions] menu A 190
[7 Network Settings] menu A 192
[ Assignable Buttons] menu A 192
[
B
System Setup] menu A 193
[
¥
My Menu] customized menu A 194
Menu item Setting options and additional information
!
[Iris Mode] [Automatic], [Manual] (A 73)
This setting is available only when a compatible lens (A 229) is attached to the camera.
[Iris Increment] [1/2 stop], [1/3 stop] (A 73)
[Fine Increment] [On], [Off] (A 73)
[Zoom-Iris Correct.] [On], [Off]
If you are using a compatible lens, when this setting is set to [On], the camera will adjust the aperture
as needed to keep the selected aperture value while zooming. Because of this adjustment, the
brightness of the image might flicker slightly or you may hear the operation sound.
[Extended ND Range] [On], [Off] (A 71)
"
[Shutter Mode] [Speed], [Angle], [Clear Scan], [Slow], [Off] (A 67)
[Shutter Increment] [1/3 stop], [1/4 stop] (A 67)
[ISO/Gain] [ISO], [Gain] (A 69)
[ISO/Gain Extended Range] [On], [Off] (A 69)
[ISO Increment] [1 stop], [1/3 stop] (A 69)
[Gain Increment] [Normal], [Fine] (A 69)
Menu Options
186
* The default value depends on the country/region or purchase.
[ Custom Picture/HDR] menu ( mode only)
#
[Light Metering] [Backlight], [Standard], [Spotlight] (A 76)
[AE Shift] –2.0 to +2.0 in 0.25 point intervals (±0) (A 75)
[AE Response] [High], [Normal], [Low] (A 74)
Determines how quickly the aperture is adjusted during automatic exposure. This setting has no
effect when one of the following lenses is attached.
[Shockless WB] [On], [Off] (A 77)
[AWB Response] [High], [Normal], [Low] (A 79)
$
[AF Mode] [One Shot], [AF-Boosted MF], [Continuous] (A 80)
[AF Frame Position] [Selectable], [Center Frame] (A 86)
[AF Frame Size] [Large], [Small] (A 86)
[Apply AF Speed Limit] [Always], [Only While Recording] (A 85)
[AF Speed] –7 to +2 (0) (A 85)
[AF Response] –3 to +3 (0) (A 85)
%
[Face Detection] [On], [Off] (A 87)
[Face AF] [Face Priority], [Face Only] (A 87)
[Camera Grip Zoom] [On], [Off] (A 89)
[Camera Grip Zoom Speed] 1 to 16 (8) (A 89)
[Tele-converter] [6.0x], [3.0x], [1.5x], [Off]
The digital tele-converter allows you to digitally increase the focal length of the camera by the
selected multiplier. Note that the image is digitally processed so the image will deteriorate throughout
the zoom range.
[EF-S Lens] [On], [Off] (A 39)
&
[ABB] (A 53)
[Color Bars] [On], [Off] (A 105)
[Color Bar Type] [SMPTE], [EBU]*, [ARIB] (A 105)
[Periph. Illum. Corr.] [On], [Off] (A 39)
[Chromatic Aberr. Corr.] [On], [Off] (A 39)
Menu item Setting options and additional information
!
[HDR/LUT] [HDR: Off], [HDR: HLG], [HDR: PQ]
[SDI]: [LUT Off], [LUT: BT.709], [LUT: ACESproxy]
[VIDEO],
k
[VF]:
[LUT Off]
, [LUT: BT.709], [LUT: HDR Assist. (1600%)],
[LUT: HDR Assist. (400%)]
(A 154)
(A 155)
[Preset] [Canon Log 3], [Canon Log], [BT.709], [Off] (A 129)
[Gamma] [Canon Log 3], [Canon Log], [Wide DR], [Normal 1 (Standard)], [Normal 2 (x4.0)],
[Normal 3 (BT.709)], [Normal 4 (x5.0)]
(A 133)
[Color Matrix] [Neutral], [Production Camera], [Cinema EOS Original], [Video], [Off] (A 133)
[Activate Other Settings] [On], [Off] (A 134 - 136)
Menu item Setting options and additional information
· CN7x17 KAS S/E1 · CN20x50 IAS H/E1
187
Menu Options
[
3
Recording/Media Setup] menu
[Other Settings] Refer to the reference page. (A 134)
[File]
[Select] [C1:CP000001] to [C20:CP000020] (A 129)
[Rename] (A 131)
[Protect] [Unprotect], [Protect] (A 131)
[Reset] [Cancel], [OK] (A 131)
[Copy to SD Card B],
[Load from SD Card B]
(A 131)
Menu item Setting options and additional information
!
[Initialize Media]
[CFast], [SD Card A],
[SD Card B]
[Cancel], [OK] (A 50)
[Main Rec Format] [RAW (CFast)], [MP4 (SD Card)], [XF-AVC (SD Card)] (A 64)
[System Frequency] [59.94 Hz], [50.00 Hz]
1
, [24.00 Hz] (A 64)
[Recording Mode] [Normal Recording], [Slow Motion Recording], [Pre-Recording], [Frame Recording],
[Interval Recording], [Continuous Recording]
(A 114)
[Recording Interval] [1 sec], [5 sec], [10 sec], [30 sec], [1 min], [5 min], [10 min] (A 117)
[Sub Rec Format] [MP4 (SD Card)], [XF-AVC (SD Card)], [Off] (A 113)
[Continuous Recording] [REC], [STBY] (A 118)
"
[Frame Rate] When [System Frequency] is set to [59.94 Hz]:
[59.94i]*, [59.94P], [29.97P], [23.98P]
When [System Frequency] is set to [50.00 Hz]:
[50.00i]*, [50.00P], [25.00P]
* XF-AVC clips only.
(A 64)
[Resolution/Color Sampling] [4096x2160 12 bit], [4096x2160 10 bit], [3840x2160 YCC420 8 bit],
[1920x1080 YCC420 8 bit]
(A 64)
For RAW clips, the setting is automatically selected by the camera.
[Audio Format (MP4)] [AAC 16 bit 2CH], [LPCM 16 bit 4CH] (A 99)
[Audio Format (RAW)] [LPCM 16 bit 4CH], [LPCM 24 bit 4CH] (A 99)
#
[Relay Recording],
[Double Slot Recording]
[On], [Off] (A 51)
$
[Metadata]
[Camera Index] [A] to [Z] (A 61)
[Reel Number], [Clip Number] [001] to [999], [Change], [Reset], [Cancel] (A 61)
[User Defined] User defined string up to 5 characters ([CANON]), [Change], [Reset], [Cancel] (A 61)
[Scene], [Take] Scene description up to 16 characters / Take description up to 8 characters, [Change],
[Reset], [Cancel]
(A 110)
[Setting] [Remote], [SD Card] (A 109, 179)
[User Memo] [Off], list of user memo files available on the SD card (A 109)
Menu item Setting options and additional information
Menu Options
188
1
The default value depends on the country/region or purchase.
[
¡
Audio Setup] menu
[Country Code], [Organization],
[User Code]
Identifiers up to 4 characters ([00__] default for [Organization] only), [Change], [Reset], [Cancel]
[Country Code]: This identifier is the country code defined by ISO-3166-1 and is to be entered
starting from the left.
[Organization]: This identifier represents the organization that owns or operates the camera and can
be obtained by registering with the SMPTE Registration Authority. If the organization is not
registered, enter [0000].
[User Code]: This identifier designates the user. Leave this blank if [Organization] is set to [0000].
[Add / File] [On], [Off] (A 132)
[Clip Numbering] [Reset], [Continuous] (A 61)
[Rec Command] [On], [Off]
When this setting is [On] and you connect the camera to an external recorder, if you start or stop
recording with the camera, the other device will also start or stop recording.
[HDMI Time Code] [On], [Off] (A 153)
[MP4 Clip/Photo Numbering] [Reset], [Continuous] (A 62)
Menu item Setting options and additional information
!
[Select CH1/CH2 Input] [INPUT Terminals], [MIC Terminal], [Monaural Mic] (A 100)
[CH2 Input] [INPUT 2], [INPUT 1] (A 100)
[Select CH3/CH4 Input] [INPUT Terminals], [MIC Terminal], [Monaural Mic] (A 100)
[CH1/CH2 ALC Link],
[CH3/CH4 ALC Link]
[Linked], [Separated] (A 102)
[Speaker Volume] [Off], 1 to 15 (8)
Available only during mode, this allows the speaker’s volume to be adjusted.
"
[Audio Rec Level CH3] [Automatic], [Manual] (A 102)
[CH3 Level] 0 to 100 (50) (A 102)
[Audio Rec Level CH4] [Automatic], [Manual] (A 102)
[CH4 Level] 0 to 100 (50) (A 102)
[Audio Rec Level CH3/CH4] [Automatic], [Manual] (A 102)
[CH3/CH4 Level] 0 to 100 (50) (A 102)
#
[INPUT 1 Mic Trimming] [+12 dB], [+6 dB], [0 dB], [–6 dB], [–12 dB] (A 101)
[INPUT 1 Mic Att.] [On], [Off] (A 103)
[INPUT 2 Mic Trimming] [+12 dB], [+6 dB], [0 dB], [–6 dB], [–12 dB] (A 101)
[INPUT 2 Mic Att.] [On], [Off] (A 103)
[INPUT 1&2 Limiter] [On], [Off] (A 102)
[MIC Att.] [On], [Off] (A 103)
[MIC Low Cut] [On], [Off] (A 103)
$
[1 kHz Tone] [–12 dB], [–18 dB], [–20 dB], [Off] (A 105)
[Headphone Volume]
1
[Off], 1 to 15 (8) (A 143)
[Monitor Channels]
1
[CH1/CH2], [CH1/CH1], [CH2/CH2], [CH1+2/CH1+2], [CH3/CH4], [CH3/CH3], [CH4/CH4],
[CH3+4/CH3+4], [CH1+3/CH2+4]
(A 157)
Menu item Setting options and additional information
189
Menu Options
1
Appears on page ! in mode.
[
¢
Monitoring Setup] menu
[HDMI OUT Channels]
1
[CH1/CH2], [CH3/CH4] (A 157)
Menu item Setting options and additional information
!
[LCD LM-V1 Brightness] –99 to +99 (±0) (A 41)
[LCD LM-V1 Contrast] –99 to +99 (±0) (A 41)
[LCD LM-V1 Color] –20 to +20 (±0) (A 41)
[LCD LM-V1 Sharpness] 1 to 4 (2) (A 41)
[LCD LM-V1 Luminance] [+2], [+1], [Normal] (A 41)
k
"
[VF Brightness] –99 to +99 (±0) (A 41)
[VF Contrast] –99 to +99 (±0) (A 41)
[VF Color] –20 to +20 (±0) (A 41)
[VF Sharpness] 1 to 4 (2) (A 41)
[VF Luminance] [High], [Normal] (A 41)
[VF Eye Sensor] [On], [Off]
When this setting is set to [On], the viewfinder will be dimmed automatically when the sensor does
not detect the user’s eye near the eyepiece for 30 seconds (or 10 seconds, in playback mode).
# (
l
")
[EVF-V70 Brightness] –99 to +99 (±0)
Adjusts the EVF-V70's brightness.
[EVF-V70 Contrast] –99 to +99 (±0)
Adjusts the EVF-V70's contrast.
[EVF-V70 Color] –20 to +20 (±0)
Adjusts the EVF-V70's color.
[EVF-V70 Sharpness] 1 to 4 (2)
Adjusts the EVF-V70's sharpness.
[EVF-V70 Luminance] [High], [Normal]
Adjusts the EVF-V70's luminance.
[EVF-V70 Eye Sensor] [On], [Off]
When this setting is set to [On], the EVF-V70 will be dimmed automatically when the sensor does not
detect the user’s eye near the eyepiece for 30 seconds (or 10 seconds, in playback mode).
$ (
l
#)
[B&W Image: VIDEO Output],
k
[B&W Image: VF Output]
[On], [Off] (A 42)
[Custom Display]
[Audio Level Indicator] [On], [Off]
[Date/Time], [Camera Data] [On], [Off]
These settings are available only when the menu is opened from the playback screen (A 141) and
determine whether the following onscreen displays will appear on the playback image.
[Audio Level Indicator]: The audio level meter (clips only).
[Date/Time]: The date and time when the clip/photo was recorded.
[Camera Data]: The aperture value, shutter speed and ISO speed/gain value used to record the clip
(clips only).
Menu item Setting options and additional information
Menu Options
190
1
The default value depends on the country/region or purchase.
[
A
Assistance Functions] menu
% (
l
$)
[OSD Output] [On], [Off] (A 156)
[Custom Display 1] (A 57)
[Light Metering],
[Custom Picture/HDR],
[Focal Length], [ND Filter],
[Focus Mode], [Key Lock],
[White Balance], [AE Shift],
[Exposure Bar], [Iris],
[ISO/Gain], [Shutter], [Peaking],
[Tele-converter], [EF-S Lens],
[Magnification], [LUT], [Lens]
[On], [Off]
[Custom Display 2] (A 57)
[Remaining Battery],
[Remaining Rec Time]
[Only Warnings], [Normal], [Off]
[Recording Mode], [Time Code],
[Reel/Clip Number],
[Interval Counter]
[On], [Off]
[Remaining Photos] [Only Warnings], [Normal], [Off]
[Temperature/Fan],
[Resolution/Color Sampling],
[Frame Rate],
[Output Terminals Status],
[OSD Output]*,
[Rec Command],
[User Memo]*, [User Bit]*,
[Monitor Channels]*,
[Audio Level Indicator],
[Network Functions], [GPS]
[On], [Off]
[On], [Normal]: Show the icon/onscreen display always or whenever the necessary conditions are
triggered.
[Only Warnings]: Show the icon/onscreen display only when a critical level is reached.
The default setting for items marked with an asterisk (*) is [Off].
[Date/Time] [Date/Time], [Time], [Date], [Off]
[Displayed Units] [Meters], [Feet]
1
Changes the distance units used in camera displays between meters and feet.
Menu item Setting options and additional information
!
[Focus Guide] [On], [Off] (A 82)
[Focus Guide 2nd Frame] [On], [Off] (A 82)
"
[Peaking: VIDEO Output],
k
[Peaking: VF Output]
[On], [Off] (A 83)
[Peaking] [Peaking 1], [Peaking 2] (A 83)
[Peaking 1] (A 83)
[Color] [White], [Red], [Yellow], [Blue]
[Gain] [Off], 1 to 15 (8)
[Frequency] 1 to 4 (2)
Menu item Setting options and additional information
191
Menu Options
1
Appears on page ! in mode.
[Peaking 2] (A 83)
[Color] [White], [Red], [Yellow], [Blue]
[Gain] [Off], 1 to 15 (15)
[Frequency] 1 to 4 (1)
[B&W during Peaking] [On], [Off] (A 83)
#
k
[Magn.: VF+VIDEO Output],
l
[Magn.: VIDEO Output],
[Magn.: SDI/HDMI Output]
[On], [Off] (A 83)
[B&W during Magn.] [On], [Off] (A 83)
$
[Zebra: VIDEO Output],
k
[Zebra: VF Output]
[On], [Off] (A 91)
[Zebra] [Zebra 1], [Zebra 2], [Zebra 1+2] (A 91)
[Zebra 1 Level] [5 ±5%] to [95 ±5%] in 5 percentage point intervals ([70 ±5%]) (A 91)
[Zebra 2 Level] 0% to 100% in 5 percentage point intervals (100%) (A 91)
%
k
[WFM: VF+VIDEO Output]
1
,
l
[WFM: VIDEO Output],
[WFM: SDI Output]
1
[On], [Off] (A 106)
[WFM Type]
1
[Line], [Line+Spot], [Select Line], [Field], [RGB], [YPbPr] (A 106)
[WFM Gain]
1
[1x], [2x] (A 106)
[WFM Y Position]
1
[0%], [15%], [30%], [45%], [50%] (A 106)
[WFM Select Line]
1
When the vertical resolution is 1080:
0 to 1079 (540) in 1-line increments, [Set]
When the vertical resolution is 2160:
0 to 2158 (1080) in 2-line increments, [Set]
(A 106)
&
k
[Markers: VF+VIDEO Output],
l
[Markers: VIDEO Output],
[Markers: SDI/HDMI Output]
[On], [Off] (A 90)
[Center Marker] [Yellow], [Blue], [Green], [Red], [Black], [Gray], [White], [Off] (A 90)
[Horizontal Marker] [Yellow], [Blue], [Green], [Red], [Black], [Gray], [White], [Off] (A 90)
[Grid Marker] [Yellow], [Blue], [Green], [Red], [Black], [Gray], [White], [Off] (A 90)
[Aspect Marker] [Yellow], [Blue], [Green], [Red], [Black], [Gray], [White], [Off] (A 90)
[Marker Aspect Ratio] [4:3], [13:9], [14:9], [16:9], [1.375:1], [1.66:1], [1.75:1], [1.85:1], [1.90:1], [2.35:1],
[2.39:1], [Custom]
(A 90)
[Marker Custom Asp. Ratio] 1.00:1 to 9.99:1 (1.00:1), [Set] (A 90)
'
[Safe Area Marker] [Yellow], [Blue], [Green], [Red], [Black], [Gray], [White], [Off] (A 90)
[Basis for Marker Safe Area] [Whole Picture], [Selected Aspect Marker] (A 90)
[Marker Safe Area %] [80%], [90%], [92.5%], [95%] (A 90)
Menu item Setting options and additional information
Menu Options
192
[7 Network Settings] menu
[ Assignable Buttons] menu
Following are the default settings for each assignable button. For a complete list of the functions that can be
assigned, refer to the detailed table (A 126).
Menu item Setting options and additional information
!
[Connection Settings] [1: (NONE)], [2: (NONE)], [3: (NONE)], [4: (NONE)] (A 169)
[Activate] [Off], [Browser Remote] (A 170)
[Browser Remote Settings] (A 170)
[Port No.] 1 to 65535 ([80])
[Camera ID] Camera identifier up to 8 characters ([C200])
[Users Settings] [One User (Full)], [Two Users (Camera/Meta)]
[Full: User Name],
[Camera: User Name],
[Meta: User Name]
User name up to 8 characters (Default user names are [Full], [Camera] and [Meta],
respectively)
[Full: Password],
[Camera: Password],
[Meta: Password]
Password up to 8 characters ([12345678])
[FTP Transfer] [Select], [All]
[FTP Transfer Settings] (A 182)
[FTP Server] Server name up to 32 characters
[FTP: User Name] User name up to 32 characters
[FTP: Password] Password up to 32 characters
[Destination Folder] Destination folder’s path up to 152 characters (Default is the root folder [/])
[Port No.] 1 to 65535 ([21])
[Passive Mode] [On], [Off]
[New Folder by Date] [On], [Off]
[Same Named Files] [Skip], [Overwrite]
Menu item Setting options and additional information
!
[Camera 1] to [Camera 7] 1: [Magn.: All], 2: [Peaking: All], 3: [Zebra: All], 4: [WFM: All],
5: [ISO/Gain], 6: [Shutter], 7: [Display]
"
[Camera 8] to [Camera 11] 8: [FUNC], 9: [Audio Status], 10: [Push Auto Iris], 11: [One-Shot AF]
#
[Camera Grip: 1] 1: [Focus Guide]
$
[LCD LM-V1: 1] and [LCD LM-V1: 2] 1: [FUNC], 2: [Display]
%
[EVF-V70: 1] to [EVF-V70: 4] 1: [FUNC], 2: [EVF-V70 Setup], 3: [Magn.: All], 4: [(NONE)]
&
[RC-V100: 1] to [RC-V100: 4] 1: [Magn.: All], 2: [Peaking: All], 3: [Zebra: All], 4: [WFM: All]
193
Menu Options
[
B
System Setup] menu
Menu item Setting options and additional information
!
[Reset] [All Settings], [Camera Settings]
1
, [Assignable Buttons]
These settings reset the following camera settings to default values/settings.
[All Settings]: All the camera’s settings except for the hour meter.
[Camera Settings]: White balance, iris, ISO speed, gain, shutter speed, [v Camera Setup] settings
and custom picture settings.
[Assignable Buttons]: Only the assignable buttons.
[Transfer Menu/
/
] (A 137)
[Save] [To Camera], [To SD Card B]
[Load] [From Camera], [From SD Card B]
[Time Zone] List of world time zones.
[UTC-05:00 New York] or [UTC+01:00 Central Europe]
2
(A 31)
[Date/Time] (A 31)
[Date Format] [YMD], [YMD/24H], [MDY], [MDY/24H], [DMY], [DMY/24H]
2
(A 31)
[Language
H
] [Deutsch], [English], [Español], [Français], [Italiano], [Polski],
[Português], [ ], [], [ ], [ ]
(A 32)
[REMOTE Term.] [RC-V100 (REMOTE A)], [Standard] (A 123)
"
[HDMI Max Res.] [3840x2160], [1920x1080] (A 153)
[SDI Output] [2048x1080 / 1920x1080], [1920x1080] (A 152)
[3G-SDI Mapping] [Level A], [Level B] (A 153)
[SDI/HDMI Scan Mode] [P], [PsF] (A 154)
#
[Time Code Mode] [Preset], [Regen.] (A 92)
[Time Code Run] [Rec Run], [Free Run] (A 92)
[Time Code DF/NDF] [DF], [NDF] (A 93)
[Set Time Code] [00:00:00:00] to [23:59:59:29] (for 59.94 Hz recordings) or
[23:59:59:24] (for 50.00 Hz recordings), [Change], [Reset], [Cancel]
(A 93)
[User Bit Type] [Setting], [Time], [Date] (A 95)
$
[Camera Ctrl Dial]
1
,
[Camera Grip Ctrl Dial]
1
[Iris], [ISO/Gain], [Off]
Selects the function of the control dial on the camera or camera grip.
[Camera Ctrl Dial Dir.]
1, 3
,
[Camera Grip Ctrl Dial Dir.]
1, 3
[Reverse], [Normal]
Changes the direction of the adjustment when operating the control dial on the camera or camera
grip.
[EVF-V70 SELECT Dial Dir.]
1, 3
[Reverse], [Normal]
Changes the direction of the adjustment when operating the SELECT dial on the optional EVF-V70
OLED Electronic Viewfinder.
[Key Lock]
1
[All Buttons], [All Except REC Button]
[Camera REC Button]
1
,
[Camera Grip REC Button]
1
[Disable], [Enable]
Independently enables or disables the uses of the REC buttons on the camera.
[Fan Speed] [High], [Low] (A 63)
Menu Options
194
1
mode only.
2
The default value depends on the country/region or purchase.
3
Appears on page # in mode.
4
Appears on page $ in mode.
5
Only when the LM-V1 LCD Monitor (supplied accessory for the C200; optional accessory for the C200B) is attached.
[
¥
My Menu] ( mode only)
%
[LED]
1, 4
(A 57)
[Tally Lamp (Front)],
[Tally Lamp (Rear)],
[CFast Access LED],
[SD Card Access LED],
[ (Ethernet)]
[On], [Off]
These settings determine whether the following LEDs and indicators will illuminate.
[Tally Lamp (Front)], [Tally Lamp (Rear)]: The tally lamps on the camera. Note that regardless of this
setting, when the camera is turned off, the tally lamps will illuminate in red momentarily after the
Q button is pressed.
[CFast Access LED], [SD Card Access LED]: The SD card access indicators and the CFast card access
indicator when the camera is accessing the respective recording media.
[ (Ethernet)]: The (Ethernet) indicator when the camera is accessing a wired network.
[Fan] (A 63)
[Mode] [Automatic], [Always On]
[Fan Speed (Always)] [High], [Low]
[Touch Screen Response]
5
[Normal], [Low] (A 40)
[Review Recording] [Entire Clip], [Last 4 sec] (A 112)
[GPS Auto Time] [On], [Off] (A 111)
&
[Retract Lens]
1
[On], [Off]
When one of the following lenses is attached to the camera and the focus mode switch on the lens is
set to AF, if this setting is set to [On], the lens will retract fully when the camera is turned off.
EF 40mm f/2.8 STM EF-S 24mm f/2.8 STM EF 50mm f/1.8 STM
[Reset Hour Meter]
1
The camera has two “hour meters” – the first keeps track of total operation time and the second
keeps track of operation time since the last time the second hour meter was reset with this function.
[Firmware]
1
[Camera]
Displays the current firmware version of the camera. This setting is usually unavailable.
[Lens] (A 38)
Menu item Setting options and additional information
!
[CAMERA-1 Edit] [Register], [Move], [Delete], [Reset All], [Rename]
"
[CAMERA-2 Edit] [Register], [Move], [Delete], [Reset All], [Rename]
#
[CAMERA-3 Edit] [Register], [Move], [Delete], [Reset All], [Rename]
$
[CAMERA-4 Edit] [Register], [Move], [Delete], [Reset All], [Rename]
%
[CAMERA-5 Edit] [Register], [Move], [Delete], [Reset All], [Rename]
Menu item Setting options and additional information
195
Displaying the Status Screens
Displaying the Status Screens
You can use the status screens to check the camera’s various settings. You can also output the status screens
to an external monitor.
1 Set an assignable button to [Status] in advance (A 125).
2 Press the assignable button to open the status screens.
The status screen most recently displayed will appear unless you turned off the camera or changed the
operating mode. In such case, the [Gamma/Color Space/Color Matrix] status screen appears in
mode and the [Assignable Buttons 1/4] status screen appears in mode.
3 Push the joystick left/right to scroll through the status screens.
4 When you have finished, press the assignable button set to [Status] again to exit the status screens.
Alternatively, you can press the CANCEL button.
[Gamma/Color Space/Color Matrix] screen A 195
[
/
Data] screens A 196
[Camera] screens A 197
[Assignable Buttons] screens A 198
[Audio] screens A 199
[Media] screen A 200
[Terminal Outputs] screen A 200
[Recording] screen A 201
[Metadata] screen A 201
[Battery/Hour Meter] screen A 202
[Network] screens A 203
[GPS Information Display] screen* A 205
* Only when the optional GP-E2 GPS Receiver is attached to the camera’s system extension terminal.
[Gamma/Color Space/Color Matrix] Status Screen ( mode only)
Operating modes:
2
1
1 Gamma curve, color space and color matrix used
for recordings, video output and displays
[CFast]: Settings used for clips recorded on the
CFast card (A 129, 133)
[SD CARD]: Settings/LUT used for clips recorded
on the SD card (A 113)
[SDI], [HDMI]: Settings/LUT used for video output
from the respective terminals (A 155)
[VIDEO], [VF]: Settings/LUT used for the camera’s
LCD screen and viewfinder
1
(A 155)
1
k
only.
2 > [ ! Custom Picture/HDR] >
[Activate Other Settings] setting (whether detailed
settings in the custom picture file are active or
not)
Displaying the Status Screens
196
[
/
Data 1/2] Status Screen ( mode only)
[
/
Data 2/2] Status Screen ( mode only)
1
2
3
4
5
6
7
8
9
10
1 Custom picture file name (A 129)
2 Master pedestal (A 134)
3 Master black RGB levels (A 134)
4 Black gamma settings (level, range and point)
(A 134)
5 Low key saturation (A 134)
6 Knee settings (slope, point and saturation)
(A 134)
7 Sharpness settings (level, horizontal detail
frequency, horizontal/vertical detail balance, limit
and select) (A 135)
8 Coring settings (level, offset and curve) (A 135)
9 Sharpness settings (knee aperture gain and
slope) (A 135)
10 Level depend settings (level, slope and offset)
(A 135)
1
2
4
5
3
1Noise reduction (A 136)
2 White balance settings (A 136)
3 Color matrix fine-tuning settings (A 136)
4 Setup level (A 136)
5 Handling of clips exceeding 100% (A 136)
197
Displaying the Status Screens
[Camera 1/4] to [Camera 4/4] Status Screens ( mode only)
7
5
8
3
1
2
9
4
6
1 ISO speed/Gain (A 69)
Selected mode, extended range, ISO increment
and gain increment
2Aperture (A 72)
Iris increment, aperture correction while zooming
3 Shutter speed increment (A 68)
4Focus (A 80)
AF mode, AF frame settings, AF speed and AF
response settings
5 Automatic exposure (AE)
AE shift (A 75), AE response (A 74)
6 White balance (A 77)
Shockless white balance, auto white balance
(AWB) response
7 Correction for peripheral illumination (A 39)
8 Correction for chromatic aberration (A 39)
9 Lens model name info (A 37)
Displaying the Status Screens
198
[Assignable Buttons 1/4] to [Assignable Buttons 4/4] Status Screens
Current functions of the assignable buttons (A 125)
1
Supplied accessory for the C200; optional accessory for the C200B.
4
2
3
1
5
1 On the camera’s body
2 On the camera grip
1
3 On the LCD monitor
1
4 On the optional EVF-V70 Electronic Viewfinder
5 On the optional RC-V100 Remote Controller
199
Displaying the Status Screens
[Audio] Status Screens
When you set an assignable button to [Audio Status], the status screens are the same except that you can press
the joystick to open the [
¡
! Audio Setup] menu.
4
1
2
3
3
2
4
In mode
In mode
1 Audio source input, audio level adjustment mode
and audio level indicator for each audio channel
(A 96)
2 Audio channels output from the headphones/
speaker (A 157)
3 Headphone volume (A 143)
4 Audio format (A 96), audio bit depth (A 157)
and audio channels (A 157) used for recording
or output.
[CFast]: Settings used for clips recorded on the
CFast card.
[SD Card]: Settings used for clips recorded on the
SD card.
[SDI], [HDMI]: Settings used for audio output from
the respective terminals.
Displaying the Status Screens
200
[Media] Status Screen
NOTES
Depending on the recording media, the total space displayed on the screen may differ from the nominal
capacity listed on the CFast card or SD card.
[Terminal Outputs] Status Screen
1
The displayed bit depth refers to the video signal’s bit depth.
2
mode only.
6
5
7
1
2
3
4
8
9
1 SD card A
2 SD card B
3 CFast card
For each:
4 Visual bar: Approximate used/available space
5 Total space
6 Used (recorded) space
7 Available space
Only for the SD card:
8 Number of remaining photos
9 SD/UHS speed class
2
1
5
3
4
1 HDMI OUT terminal status (A 153): Signal type
(HDMI/DVI), video output, audio output
2 SDI terminal status: Video output
1
(A 152), 3G-
SDI output mapping (A 153)
3 Output of onscreen displays (A 156)
4 Time code output from the HDMI OUT terminal
2
(A 153)
5User bit
2
(A 95)
201
Displaying the Status Screens
[Recording] Status Screen ( mode only)
[Metadata] Status Screen ( mode only)
3
4
1
5
2
6
7
1 Resolution and color sampling (A 65)
2Bit rate (A 64)
3 Relay recording (A 51)
4 Special recording mode (A 114)
5 Interval length for interval recording mode
(A 117)
6 MP4 Clip/Photo numbering (A 62)
7 Clip numbering (A 61)
2
1
3
4
5
6
9
7
8
1 User memo file name (A 109)
2 Clip title
3 Camera operator
4 Filming location
5 Clip description
6 Clip name information (A 61)
(camera index, reel number, clip number,
user-defined field)
7 Scene and take information (A 110)
8 Unique material identifier (UMID) code (A 188):
country, organization, user
9 Embed custom picture files with clips (A 132)
Displaying the Status Screens
202
[Battery/Hour Meter] Status Screen
1
2
3
4
5
1 Remaining recording time
2 Remaining recording time indicator
3 Battery life indicator
4 Total operation time (A 194)
5 Operation time since using [Reset Hour Meter]
(A 194)
203
Displaying the Status Screens
[Network 1/5] to [Network 3/5] Status Screens*
* In mode, [Network 1/6] to [Network 3/6].
Connection settings of the current network connection (A 161)
TCP/IP settings of the current network connection (A 163)
6
1
2
3
4
5
13
10
11
12
7
8
9
1 Network configuration name (A 169)
2 Connection type
3 SSID (network name)
4 Authentication and encryption method
5 WEP index key
6 Wi-Fi frequency band and channel
7 IP address assignment method
8 IP address
9Subnet mask
10 Default gateway
11 Primary DNS server (assignment method/
IP address)
12 Secondary DNS server (assignment method/
IP address)
13 Camera’s MAC address (wireless and Ethernet)
Displaying the Status Screens
204
[Network 4/5] and [Network 5/5] Status Screens ( mode only)
Settings for Browser Remote (A 170)
[Network 4/6] to [Network 6/6] Status Screens ( mode only)
* The password itself will not be displayed.
2
1
3
4
1 Camera ID
2 Port number
3 Camera’s URL
4 User setting (A 170), user name and password
settings
5
1
2
3
4
6
7
8
FTP server settings (A 182)
1 FTP server (host) name
2User name
3 Password protection*
4 Destination folder on the FTP server
5Port number
6Passive mode
7 Create new folders by transfer date
8 Handling of same-named files
205
Displaying the Status Screens
[GPS Information Display] Status Screen ( mode only)
For details refer to
Recording GPS Information (Geotagging)
(A 111).
1
2
3
4
5
1Latitude
2 Longitude
3 Elevation
4 UTC (coordinated universal time) date and time
5 Satellite signal strength
Troubleshooting
206
Troubleshooting
If you have a problem with your camera, refer to this section. Consult your dealer or a Canon Service Center if
the problem persists.
Power source
The camera will not turn on or it turns off by itself.
- The battery pack is exhausted. Replace or charge the battery pack.
- Remove the battery pack and reattach it correctly.
Shortly after turning it on, the camera turns off on its own.
- You are using a battery pack that is not compatible for use with this camera. Use a recommended battery pack
(A 222).
Cannot charge the battery pack.
- The temperature of the battery pack is outside the charging range. If the battery pack’s temperature is below 0 °C
(32 °F), warm it before charging it; if it is above 40 °C (104 °F), let the battery pack cool down before charging it.
- Charge the battery pack in temperatures between 0 °C and 40 °C (32 °F and 104 °F).
- The battery pack is faulty. Replace the battery pack.
The battery pack is exhausted extremely quickly even at normal temperatures.
- Check the [Battery/Hour Meter] status screen (A 202) to check if the battery pack has reached the end of its battery
life. If so, buy a new battery pack.
Recording
The camera’s controls are not responsive/disabled.
- The camera grip’s plug may not be correctly connected to the camera. When attaching the camera grip to the camera,
make sure the camera grip’s plug is firmly inserted all the way into the connection terminal on the camera (A 43). If
you changed the angle of the camera grip, make sure you did not partially disconnect the plug by mistake.
- When the
Q
switch is set to
C
, all buttons (or all buttons with the exception of some REC buttons) are locked
and cannot be operated. Set the
Q
switch to CAMERA. You can change which controls are locked with the
> [$ System Setup] > [Key Lock] setting (A 193).
Pressing the REC button will not start recording.
- The recording media is full or it already contains the maximum number of clips (999 clips). Delete some clips (A 147)
or save your clips (A 158) and initialize the recording media (A 50) to free some space. Alternatively, replace the
recording media.
- The REC button that was used may be disabled. Change the current settings in the
> [$ System Setup] >
[Camera REC Button] or [Camera Grip REC Button] setting to enable the use of the desired REC buttons.
- You may not be able to start or stop recording while controls on the optional RC-V100 Remote Controller are being
operated. Stop using the remote controller and then press the REC button.
The point where the REC button was pressed does not match the beginning/end of the recording.
- There is a slight interval between pressing the REC button and the actual start/end of recording. This is not a
malfunction.
The camera will not focus.
- The camera may not be able to focus on certain subjects using autofocus. Focus manually (A 81).
- When the AF mode is set to AF-boosted MF, start focusing manually until the AF frame changes to white (automatic
adjustment range).
-
k
The viewfinder is not adjusted. Use the dioptric adjustment lever to make the proper adjustment (A 40).
- The lens is dirty. Clean the lens with a soft lens-cleaning cloth.
When a subject flits across in front of the lens, the image appears slightly bent.
- This is a phenomenon typical of CMOS image sensors. When a subject crosses very quickly in front of the camera, the
image may seem slightly warped. This is not a malfunction.
Bright red, green or blue dots appear on the screen.
- Try adjusting the black balance (A 53). The camera’s CMOS sensor is a delicate piece of precision engineering. Direct
exposure of the sensor to ion rays or other types of cosmic radiation may affect it and this may rarely appear as bright colored
dots on the screen. This is the nature of CMOS image sensors and does not represent a malfunction.
- The effects of the damage may be more noticeable when the camera is used in places subject to high temperatures,
when a high ISO speed or gain level is used and when slow shutter speeds are used.
207
Troubleshooting
Abnormal images appear on the screen and the camera cannot record properly.
- While recording using an almost empty battery pack together with the AC adapter, the AC adapter was inadvertently
disconnected or the power supply was suddenly interrupted. Reconnect the AC adapter and turn the camera off and
then on again or replace the battery pack with a fully charged one.
Changing between recording (
Ü
REC) and record standby (STBY) takes longer than usual.
- When the recording media contains a large number of clips, some operations may take longer than usual. Save your
clips (A 158) and initialize the recording media (A 50). Alternatively, replace the recording media.
The camera cannot record to a recording media properly.
- This may occur as recordings are made and deleted over time. Save your clips (A 158) and initialize the recording media
(A 50).
After using the camera for a long time, it becomes hot.
- The camera may become hot after using it continuously for long periods of time; this is not a malfunction. If the
camera becomes unusually hot or it becomes hot after using it only for a short while, it may indicate a problem with
the camera. Consult a Canon Service Center.
Playback
Cannot delete a clip.
- The LOCK switch on the SD card is set to prevent accidental erasure. Change the position of the LOCK switch.
Deleting clips takes longer than usual.
- When the recording media contains a large number of clips, some operations may take longer than usual. Save your
clips (A 158) and initialize the recording media (A 50).
Cannot delete a photo.
- The LOCK switch on the SD card is set to prevent accidental erasure. Change the position of the LOCK switch.
- Photos that were protected using other devices cannot be deleted with the camera.
Indicators and Onscreen Displays
appears in red on the screen.
- Battery pack is exhausted. Replace or charge the battery pack.
í
appears on the screen.
- The camera cannot communicate with the battery pack attached so the remaining battery time cannot be displayed.
The tally lamp does not illuminate.
-Set > [% System Setup] > [LED] > [Tally Lamp (Front)] or [Tally Lamp (Rear)] to [On].
The tally lamp flashes quickly. (4 flashes per second)
- The battery pack is exhausted. Replace or charge the battery pack.
- There is not enough available space on the recording media. Delete some clips (A 147) to free some space or replace
the selected recording media.
- A system error has occurred. Turn the camera off and then on again. If this does not solve the problem, consult a
Canon Service Center.
The tally lamp flashes slowly. (1 flash per second)
- The combined available space on the CFast card or both SD cards is low. In the case of SD cards, replace the SD card
that is not being recorded onto.
/ appears in red on the screen.
- An SD card error occurred. Remove and reinsert the SD card. If the display does not change back to normal, save your
recordings (A 158) and initialize the SD card (A 50).
;/6/7 appears in red on the screen followed by [END].
- The indicated recording media is full. Use a different recording media or delete some recordings (A 122, 147) to free
some space on the recording media.
Even after stopping recording, the access indicator stays illuminated in red.
- The clip is being recorded on the card. This is not a malfunction.
b
appears in yellow on the screen.
- The camera’s internal temperature has reached a predetermined level. You can continue using the camera.
Troubleshooting
208
b
appears in red on the screen.
- The camera’s internal temperature has risen further while
b
appeared in yellow on the screen.
- If the icon appears in red in mode while > [% System Setup] > [Fan] > [Mode] is set to [Always On]
or in mode while > [$ System Setup] > [Fan Speed] is set to [High], turn off the camera and wait
until the temperature has lowered.
- In mode, if the fan mode is set to [Automatic] and the fan was turned off while recording, the fan will turn on
automatically (in that case,
`
will appear on the screen).
`
appears in red on the screen.
- The cooling fan may not be working properly. The camera will automatically turn off in approximately 10 minutes.
Consult a Canon Service Center.
i
appears on the screen.
- The camera and lens cannot communicate normally. Clean the lens’s contacts and reattach the lens.
appears in red on the screen.
- The lithium button battery’s charge has been completely depleted. Save the camera’s settings on an SD card (A 137)
and replace the lithium button battery. Then, restore the camera’s settings from the file saved on the SD card.
Picture and Sound
The screen of the monitoring device connected to the VIDEO terminal does not turn on.
- Make sure the unit cable connecting the camera’s VIDEO terminal and the monitoring device’s VIDEO terminal is
correctly connected on both sides.
The peaking/magnification/zebra pattern/waveform monitor/B&W image does not appear on the screen.
- Check that display of the desired assistance function is enabled on the screen used with the corresponding output
settings.
HDR video output to external monitors appears brighter now than before updating the firmware.
- With the current firmware version, the camera follows the ITU-R BT.2408 reports recommendations regarding
reference brightness levels for HDR output. The recordings themselves have not been changed.
Screen displays turn on and off repeatedly.
- The battery pack is exhausted. Replace or charge the battery pack.
- Remove the battery pack and reattach it correctly.
Abnormal characters appear on the screen and the camera does not operate properly.
- Disconnect the power source and reconnect it after a short time. If the problem still persists, use the >
[! System Setup] > [Reset] > [All Settings] function. This resets all the camera’s settings to default values, except
for the hour meter.
Video noise appears on screen.
- Keep a distance between the camera and devices that emit strong electromagnetic fields such as near powerful
magnets and motors, MRI machines or high-voltage power lines.
Horizontal bands appear on the screen.
- This is a phenomenon typical of CMOS image sensors when recording under some types of fluorescent, mercury or
sodium lamps. This is not a malfunction. You may be able to reduce the symptoms by setting the shutter speed mode
to [Speed] and the shutter speed to a value matching the frequency of the local electrical system: 1/50* or 1/100 for
50 Hz systems, 1/60 or 1/120 for 60 Hz systems.
* May not be available depending on the frame rate.
Audio cannot be recorded.
- The audio input selection switch of the INPUT terminal is in the AES/EBU position but an analog audio source is
connected, or it is set to the ANALOG position and a digital audio source is connected. Set the audio related switches
correctly according to the audio source you wish to use (A 99).
- When using the INPUT 1/INPUT 2 terminals, make sure you are using an XLR connector. When using the MIC terminal,
make sure you are using a condenser microphone with its own power supply and a 3.5 mm stereo mini plug.
- The external microphone connected to the INPUT 1/INPUT 2 terminal requires phantom power. Set the corresponding
INPUT 1/INPUT 2 audio input selection switch to MIC+48V (A 99).
Audio is recorded at an extremely low level.
- When using the INPUT 1/INPUT 2 terminals or MIC terminal: The audio level switch for CH1 or CH2 is set to M, and
the recording level is set too low. Check the audio level meter on the screen and adjust the audio level correctly
(A 101).
- The microphone attenuator is on. Turn off the microphone attenuator (A 103).
209
Troubleshooting
Sound is distorted or is recorded at lower levels.
- When recording near loud sounds (such as fireworks, shows or concerts), sound may become distorted or it may not
be recorded at the actual levels. Activate the microphone attenuator (A 103), or adjust the audio recording level
manually.
Recording Media and Accessories
Cannot insert the recording media.
- The CFast card or SD card you are trying to insert is not facing the correct direction. Turn it over and insert it.
Cannot record on the CFast card.
- A compatible CFast card must be used (A 47).
- Initialize the CFast card (A 50) when you use it with the camera for the first time.
- The CFast card is full or it already contains the maximum number of clips (999 clips). Delete some clips (A 147) to
free some space or replace the CFast card.
Cannot record on the SD card.
- A compatible SD card must be used (A 47).
- Initialize the SD card (A 50) when you use it with the camera for the first time.
- The LOCK switch on the SD card is set to prevent accidental erasure. Change the position of the LOCK switch.
- Photos can be recorded only to SD card B. Insert an SD card into SD card slot B.
- The SD card is full or it already contains the maximum number of clips (999 clips). Delete some recordings (A 122,
147) to free some space or replace the SD card.
- The folder and file numbers for MP4 clips and photos have reached their maximum value. Set >
[$ Recording/Media Setup] > [MP4 Clip/Photo Numbering] to [Reset] and insert a new SD card.
Recording to and playing back from a CFast card is slow.
- This may occur as video is recorded/deleted over time. Save your clips (A 158) and initialize the CFast card (A 50).
Recording to and playing back from an SD card is slow.
- This may occur as clips and photos are recorded/deleted over time. Save your recordings (A 158) and initialize the
SD card (A 50).
The optional RC-V100 Remote Controller or commercially available remote control does not work.
- Make sure that > [! System Setup] > [REMOTE Term.] is set to [RC-V100 (REMOTE A)] when using the
optional RC-V100 Remote Controller or [Standard] when using a commercially available remote control.
- Turn off the camera, reconnect the remote controller and then turn the camera back on again.
-When > [! Custom Picture/HDR] > [Activate Other Settings] is set to [Off] or the currently selected custom
picture file is protected, detailed custom picture settings cannot be adjusted using the RC-V100. Set [Activate Other
Settings] to [On] after selecting a custom picture file that is not protected (A 129).
Connections with External Devices
Video noise appears on a nearby TV screen.
- When using the camera in a room where a TV is located, keep a distance between the AC adapter and the power or
antenna cables of the TV.
Playback looks fine on the camera but there is no image on the external monitor.
- The camera is not connected correctly to the external monitor. Make sure you are using the correct connection
(A 152).
- The video input on the external monitor is not set to the video terminal to which you connected the camera. Select the
correct video input.
The computer does not recognize the camera even though the camera is connected correctly.
- Disconnect the USB cable and turn off the camera. After a short while, turn it on again and restore the connection.
- Connect the camera to a different USB port on the computer.
- Establish a USB connection while the [MP4] or [Photo] index screen is displayed.
Cannot transfer MP4 clips or photos to the computer.
- The SD card contains too many MP4 clips and photos. Delete MP4 clips or photos until the SD card contains a
combined total of 2,500 (Windows)/1,000 (macOS) or fewer and then use a card reader to transfer the recordings from
the SD card.
There is no picture or sound from an external monitor connected to the SDI terminal
- If an HDMI cable is connected to the HDMI OUT terminal, disconnect it.
- Check that the external monitor’s settings match the configuration of the output signal selected on the camera
(A 149).
There is no picture or sound from an external monitor connected to the HDMI OUT terminal
- Disconnect the HDMI cable and then restore the connection or turn the camera off and then on again.
Troubleshooting
210
The peaking/B&W image/magnification/zebra pattern/waveform monitor/onscreen markers do not appear on the
viewfinder or in the video from the VIDEO terminal.
- Check that that display of the desired assistance function is enabled for the desired output device or terminal.
Magnification/waveform monitor/onscreen markers do not appear in the video from the SDI terminal.
- Check that that display of the desired assistance function is enabled for the SDI terminal.
Magnification/onscreen markers do not appear in the video from the HDMI terminal.
- Check that that display of the desired assistance function is enabled for the HDMI terminal.
Network Functions
Check This First
Cannot connect with an access point.
- There are other devices in the vicinity interfering with the wireless signal. Remove the camera grip and then set up the
network-related settings again. If this does not solve the problem, refer to Precautions Regarding Wi-Fi Networks
(A 211).
- Password information is not saved with the camera settings. When you load onto the camera settings from an SD
card, all the passwords in the network-related settings are reset. Set up the network-related settings as necessary
(A 162).
- Check that the settings on the network device the camera is trying to connect with are correct.
Cannot establish a Camera Access Point connection with a network device.
- There are other devices in the vicinity interfering with the wireless signal. Remove the camera grip and then set up the
network-related settings again. If this does not solve the problem, refer to Precautions Regarding Wi-Fi Networks
(A 211).
- When you reset all the camera settings, all network settings are lost as well. Set up the Camera Access Point settings
again (A 163).
Cannot connect with a wired (Ethernet) network.
- Use a category 5e or better shielded twisted pair (STP) Ethernet cable.
- Try replacing the Ethernet cable.
- When you reset all the camera settings, all network settings are lost as well. Set up the network settings again
(A 162).
- Check that the network device to which the camera is connected is on and functioning properly. To use 1000BASE-T
connection speeds, make sure to use network devices compatible with Gigabit Ethernet (1000BASE-T).
The Browser Remote application will not start on the Web browser.
- Make sure Browser Remote is activated (A 171).
- The URL entered into the Web browser’s address bar is incorrect. Be sure to use the URL exactly as it appears in the
[Network 4/5] status screen (A 204).
The Browser Remote screen is not displayed correctly on the Web browser.
- The device, operating system or Web browser used may not be supported. For the latest information about supported
systems, visit your local Canon Web site.
- Enable JavaScript and cookies in your Web browser’s settings. For details, refer to the help modules or online
documentation of the Web browser used.
- Delete the cache and cookies for Browser Remote's URL in your Web browser and restart Browser Remote.
Are the access point (wireless router), camera, computer or other network devices all turned on?
Is the network working and correctly configured?
Are all network devices correctly connected to the same network as the camera?
Are there any obstructions between the camera and the access point or between the network device used
and the access point?
211
Troubleshooting
Precautions Regarding Wi-Fi Networks
When using a Wi-Fi network, try the following corrective actions if the transmission rate drops, the connection is
lost, or other problems occur.
Positioning a network device (access point, mobile device, etc.)
- When using a Wi-Fi network indoors, place the network device in the same room as the camera.
- Place the network device in an open, unobstructed location, where people or objects do not come between it and the
camera.
- Place the network device as close as possible to the camera. Change the height or facing of the network device, as
necessary.
Nearby electronic devices
- If the transmission rate over a Wi-Fi network drops because of interference from the following electronic devices,
switching to the 5 GHz band or to a different channel may solve the problem.
- Wi-Fi networks using the IEEE 802.11b/g/n protocol operate in the 2.4 GHz band. For this reason, the transmission
rate may drop if there are nearby microwave ovens, cordless telephones, microphones, or similar devices operating on
the same frequency band.
- If another access point operating on the same frequency band as the transmitter is used nearby, the transmission rate
may drop.
Using multiple cameras/wireless transmitters/access points
- Check that there are no IP address conflicts among the devices connected to the same network.
- If multiple C200 / C200B cameras are connected to a single access point, connection speeds may be reduced.
- To reduce radio wave interference when there are multiple access points using IEEE 802.11b/g or IEEE 802.11n (in the
2.4 GHz band), leave a gap of four channels between each wireless access point. For example, use channels 1, 6, and
11, channels 2, 7, and 12, or channels 3, 8, and 13. If you can use IEEE 802.11a/n (in the 5 GHz band), switch to IEEE
802.11a/n and specify a different channel.
List of Messages
Refer to this section if a message appears on the screen. The messages in this section appear in alphabetical
order. Note that for some messages, an indication of the recording media involved (SD card A, SD card B, CFast,
or a combination thereof) may appear above the message itself.
Accessing CFast/SD Card A/SD Card B Do not remove
- You opened the CFast card slot cover or SD card slot cover while the camera was accessing the recording media.
Close the card slot cover.
Battery communication error. Does this battery display the Canon logo?
- This may be due to using a battery pack not recommended by Canon for use with this camera.
- If you are using a battery pack recommended by Canon for use with this camera, there may be a problem with the
battery pack or camera. Consult a Canon Service Center.
Buffer overflow. Recording was stopped.
- The data transfer rate was too high for the recording media in use and the recording was stopped. Use a
recommended recording media (A 47).
Camera
b
Lens communication error. Clean the lens’s contacts and reattach the lens.
- The camera cannot correctly communicate with the lens due to dirty lens contacts. After the message disappears, the
i
icon appears on the screen. Clean the lens contacts with a soft cloth and reattach the lens.
Cannot play back
- The recording media contains clips that were recorded using a system frequency different from the one currently used
by the camera. To play back the recordings on the card, change the > [! Recording/Media Setup] >
[System Frequency] setting to match the recordings on the recording media.
- The XF-AVC clip’s file control information* is corrupted or there was a decoder error. Turn the camera off and then on
again. If this does not solve the problem, consult a Canon Service Center.
* Corrupted file control information cannot be recovered. Memory cards or XF-AVC clips with corrupted file control
information cannot be read by the software (Canon XF Utility or plugins for NLE applications).
Cannot switch SD card slots
- The SLOT SELECT button was pressed while the camera is recording. Wait until recording is finished to change the
selected SD card slot.
Change the battery pack
- The battery pack is exhausted. Replace or charge the battery pack.
Troubleshooting
212
Check CFast/SD Card A/SD Card B
- Cannot access the recording media. Check the recording media and make sure it is inserted correctly.
- A recording media error occurred. The camera cannot record or display the image. Try removing and reinserting the
recording media, or use a different recording media.
- You inserted a MultiMedia Card (MMC) into the camera. Use a recommended SD card (A 47).
- If after the message disappears,
, or appears in red, perform the following: Turn off the camera and remove
and reinsert the recording media.
;
,
6
or
7
turns back to green you can resume recording/playback. If the
problem persists, save your recordings (A 158) and initialize the recording media (A 50).
Check the connection of the camera grip
- The camera grip may not be attached correctly. Check the connection.
Cover is open
- The CFast card slot cover or SD card slot cover was open when the camera was switched to or turned on in
mode. Insert a card and close the card slot the cover.
Fan error
- The cooling fan may not be working properly. Consult a Canon Service Center.
File name error
- You attempted to record a clip while clip numbers are at their maximum value. Save your clips (A 158) and initialize
the recording media (A 50) or delete all the clips (A 147).
- You attempted to take a photo while photo numbers are at their maximum value. Set > [$ Recording/Media
Setup] > [MP4 Clip/Photo Numbering] to [Reset] and delete all the photos on the SD card (A 122) or initialize it
(A 50).
Invalid operation
- The following operations cannot be performed.
Adding a shot mark to a frame that already has a shot mark or to a clip in frame recording mode or interval recording
mode.
Adding an $ mark to a clip that already has an $ mark or adding a % mark to a clip that already has a % mark.
Pressing the REC button when there are no recording media in the camera.
Lens error Change the frame rate
- The lens attached to the camera is not compatible for shooting at the frame rate selected on the camera. Select a
different the frame rate (A 64).
Lens error Turn the camera off, then on again.
- There was a communication error between the camera and the lens. Turn the camera off and then on again.
Lens firmware update Firmware update failed. Try updating again.
- The lens’s firmware could not be correctly updated. Try updating the lens’s firmware again.
May not be possible to record clips on this media
- The SD card selected for recording has a Speed Class rating of 4 or lower (when the main recording format is MP4) or
6 or lower (when the main recording format is XF-AVC). Use a recommended SD card (A 47).
Media full
- The recording media is full. Replace the recording media or delete some recordings (A 122, 147) to free some space
on the recording media.
- SD card A or SD card B is full so recording will not start. Switch to the SD card in the other SD card slot to record.
Media is almost full
- The amount of available space on the recording media is low. Replace the recording media or delete some recordings
(A 122, 147) to free some space on the recording media.
- The amount of available space on SD card A and SD card B combined is low. Replace the SD card that is not selected.
Media is not supported
- 600 MB or smaller CFast cards and 256 MB or smaller SD cards cannot be used with the camera. Use a
recommended recording media (A 47).
Memory card is write-protected
- The LOCK switch on the SD card is set to prevent accidental erasure. Change the position of the LOCK switch.
Noise levels will rise on the image of the sub r
ecording
and on video outputs not in RAW.
- The primary recording format is set to RAW and [Gamma] in the custom picture file is set to an option other than
[Canon Log] or [Canon Log 3]. Under such conditions, there will be more noise on video recorded with proxy recording
clips on the SD card and on video output from the SDI terminal. If you do not need to record RAW video, change the
primary recording format.
Number of clips already at maximum
- The recording media selected for recording already contains the maximum number of clips (999 clips). Replace the
recording media.
213
Troubleshooting
Number of Shot Marks at maximum
- The shot mark could not be added because the clip already contains 100 shot marks.
Power Zoom Adapter Check the power supply.
- The power zoom adapter’s remaining battery charge is low. Replace the power zoom adapter’s batteries.
Power Zoom Adapter Temperature too high. Cannot perform task.
- The power zoom adapter cannot be operated because its temperature is too high. Stop using the power zoom adapter
and let it cool down before using it again.
Recommend checking the data and initializing
- The recording media cannot be used for any of the following reasons. Save your clips (A 158) and initialize the
recording media (A 50).
A problem has occurred with the recording media.
The camera cannot read the data on the recording media.
The recording media was initialized using a computer.
The recording media is partitioned.
- The recording media was initialized using a camera with a different firmware version. To be able to record on the
recording media, save the recordings it contains and then initialize it using this camera.
Recording was stopped.
- The file control information is corrupted or there was an encoder error. Turn the camera off and then on again. Then,
remove the recording media being used and reinsert it. Alternatively, replace the CFast card. If this does not solve the
problem, consult a Canon Service Center.
SD Card ASD Card B / SD Card BSD Card A Switched
- This message appears when you use the SLOT SELECT button to switch the SD card slot in use or recording
continued from one SD card to the other.
SD Card ASD Card B / SD Card BSD Card A Will switch in a moment
- The SD card is almost full so recording will continue on the other SD card in approximately 1 minute.
Some clips require data recovery.
- While recording, the camera’s power stopped or the memory card was removed, causing an error with the XF-AVC
clip. Try recovering the clip (A 52).
The memory card is not compatible with the current recording settings.
- When recording MP4 or XF-AVC clips, an SD card that is not compatible with UHS Speed Class 3 is in the selected SD
card slot while > [
3
" Recording/Media Setup] > [Resolution/Color Sampling] is set to [3840x2160
YCC420 8 bit]. Replace the SD card with one that supports a UHS Speed Class rating of 3 or set the resolution/bit rate
to [1920x1080 YCC420 8 bit].
The number of ND filters used has changed. Check the focus.
- When using ND filter settings in the extended range (8 stops or 10 stops), the number of ND filters used changes and
this may result in a shift in focus. Check the focus before resuming shooting.
The video configuration was changed. Check the settings.
- One or more of the video configuration settings may have changed automatically due to a change in the recording or
media settings. Check the settings before you continue recording.
This function is not compatible with the current lens.
- The selected setting is not compatible with the lens currently attached to the camera and cannot be used.
Too many photos and MP4 movies. Disconnect the USB cable.
- Disconnect the USB cable. Try using a memory card reader or decrease the number of photos and clips on the
memory card to fewer than 2,500 (Windows) or 1,000 (macOS) and then restore the connection.
Unable to recover data
- Could not recover the selected clip. Save your clips (A 158) and delete the clips that could not be recovered
(A 147).
- The camera may not be able to recover clips when there is not enough space on the recording media. Delete some
clips (A 147) to free some space.
Troubleshooting
214
Wi-Fi Functions
Along with this list, refer also to the instruction manuals of the access point or other external devices you are
using.
A User is already accessing the server. Try again later.
- This message appears on the screen of the connected device. Another device connected to the network is already
operating the camera. To use this device, first end the connection on the device accessing the camera and then touch
Retry.
Cannot log in to FTP server.
- Check the user name and password information in the FTP server settings (A 182).
Cannot transfer files to FTP server.
- Check that there is enough available space in the data storage device (hard disk, etc.) that contains the destination
folder on the FTP server.
FTP transfer error. File transfer was not completed.
- An error occurred while transferring files to the FTP server. Turn then camera and the FTP server off and then on again
and try again the FTP transfer.
IP address conflict
- Another device on the same network has the same IP address assigned to the camera. Change the IP address of the
conflicting device or the camera.
LAN cable not connected.
- You attempted to connect to a wired network but the Ethernet cable is not connected. Check that the Ethernet cable is
correctly connected to the camera’s
(Ethernet) terminal and to the LAN/Ethernet port on the network device.
Multiple access points detected. Try the operation again.
- There are multiple access points sending out a WPS signal at the same time. Try the operation again later or perform
setup using the [WPS: PIN Code] or [Search for Access Points] option (A 165).
Network is not working correctly
- There’s a hardware problem with the camera’s network related circuitry. Try turning the camera off and the on again. If
the problem persists, consult a Canon Service Center.
No access points found
- The camera searched for active Wi-Fi networks (access points) in the area but none were found. Make sure the access
point is working correctly and try connecting again.
- The access point is operating in stealth mode. Deactivate the stealth function in the wireless router (access point)
settings.
- The connection wizard may not be able to find the access point if MAC address filtering is activated. Check the
[Network 3/5] status screen (A 195) and make sure to add the camera’s MAC address to the list of approved wireless
devices in the wireless router (access point) settings.
Reached the end of the adjustment range
- This appears on the screen of the connected device. When focusing with Browser Remote, this message will appear
when a focus adjustment would push the focus out of the lens’s available range.
Some files could not be transferred.
- The file system is corrupted or you attempted to transfer clips not recorded with this camera. Delete those clips from
the SD card and then transfer the files again (A 182).
- The destination folder contains files with the same file name as those to be transferred. Rename the files or set
> [! Network Settings] > [FTP Transfer Settings] > [Same Named Files] to [Overwrite] to overwrite the files
in the destination folder.
Unable to complete WPS. Try the operation again.
- More than 2 minutes passed between activating WPS on the access point and selecting [OK] on the camera. Start
over the WPS procedure from the beginning.
- The WPS button was not held down long enough. Refer to the instruction manual of your wireless router. When using
WPS to make a wireless connection, keep the WPS button held down until the wireless router’s WPS function is
activated.
- The access point’s encryption method is set to [WEP]. Wi-Fi Protected Setup (WPS) cannot connect to access points
set to this encryption method. Change the access point’s encryption method or use another connection method
(A 162).
- Turn off the camera and access point, turn them back on again and then start over the WPS procedure from the
beginning. If this does not solve the problem, try using the [Search for Access Points] option (A 166).
215
Troubleshooting
Unable to connect
- Could not connect to the access point or network device selected.
- Cordless phones, microwave ovens, refrigerators and other appliances may interfere with the wireless signal. Try using
the camera in a location farther away from such appliances.
Unable to connect to FTP server.
- Could not connect to the FTP server. Check the FTP server settings (A 182).
Unable to obtain an IP address
- If you are not using a DHCP server, connect using the [Manual] option and enter the IP address using the [Manual]
option (A 167).
- Turn on the DHCP server. If it is already on, make sure it is functioning properly.
- Make sure the address range for the DHCP server is sufficient.
- If you are not using a DNS server, set the DNS address to one other than [0.0.0.0].
- Set the DNS server’s IP address in the camera.
- Turn on the DNS server. If it is already on, make sure it is functioning properly.
- Make sure that the DNS servers IP address and the name for that address are correctly configured.
- If you are using a wireless gateway router, make sure all of the devices in the network, including the camera, are
configured with the correct gateway address.
Wi-Fi connection terminated
- An error occurred on the access point or connected device. Check the network or connected device and try
connecting again.
- The Wi-Fi signal became too weak and the wireless connection was lost. Wait a moment or turn off other devices in
the area that may be interfering with the Wi-Fi signal and then try connecting again.
Wi-Fi error. Incorrect authentication method
- Check the access point’s authentication/encryption method and change the camera’s Wi-Fi settings (A 169) as
necessary.
Wi-Fi error. Incorrect encryption key.
- When the authentication mode was set to [WPA-PSK], [WPA2-PSK] or [Shared Key], or the encryption method was set
to [WEP], the encryption key (for WEP, AES or TKIP encryption) entered or its length (number of characters) is
incorrect.
Valid passwords vary depending on the encryption method:
- 64-bit WEP encryption: 5 ASCII characters or 10 hexadecimal characters.
- 128-bit WEP encryption: 13 ASCII characters or 26 hexadecimal characters.
- AES / TKIP encryption: 8 to 63 ASCII characters or 64 hexadecimal characters.
Wi-Fi error. Incorrect encryption method
- Make sure the camera and access point are using the same authentication/encryption method.
Handling Precautions and Safety Instructions
216
Handling Precautions and Safety Instructions
Be sure to read these instructions in order to operate the product safely. Follow these instructions to prevent
injury or harm to the operator of the product or others.
WARNING
Denotes the risk of serious injury or death.
Stop using the product in any case of unusual circumstances such as the presence of smoke or a strange
smell.
Do not touch any exposed internal parts.
Do not get the product wet. Do not insert foreign objects or liquids into the product.
Do not touch the product connected to a power outlet during lightning storms. This may cause electric shock.
Do not disassemble or modify the product.
Do not expose the product to strong shocks or vibration.
Use only power sources specified in this instruction manual
for use with the product.
Observe the following instructions when using a battery charger or AC adapter.
- Do not touch the battery charger or AC adapter connected to a power outlet during lightning storms.
- Do not use the product if the power plug is not fully inserted into the power outlet.
- Do not unplug the product by pulling the power cord.
- Do not plug in or unplug the product with wet hands.
- Do not place heavy objects on the power cord. Do not damage, break or modify the power cord.
- Do not leave the product connected to a power source for long periods of time.
Do not expose the terminals to dirt or let them come into contact with metallic pins or other metal objects.
Do not charge batteries/battery packs at temperatures outside the range of 0 - 40 °C (32 - 104 °F).
Observe the following instructions when using commercially available batteries or provided battery packs.
- Do not use leaking batteries/battery packs.
- If a battery/battery pack leaks and the material contacts your skin or clothing, flush the exposed area
thoroughly with running water. In case of eye contact, flush thoroughly with copious amounts of clean
running water and seek immediate medical assistance.
- Use batteries/battery packs only with their specified product.
- Do not heat batteries/battery packs or expose them to fire.
- Do not charge batteries/battery packs using non-authorized battery chargers.
- Do not expose the terminals to dirt or let them come into contact with metallic pins or other metal objects.
- When disposing of batteries/battery packs, insulate the terminals with tape or other means.
k
Do not look through the viewfinder at strong light sources such as the sun on a bright day or lasers and
other strong artificial light sources.
Do not leave a lens or a camera/camcorder with a lens attached, exposed without the lens cap attached. The
lens may concentrate the light and cause fire.
Do not wrap the product in cloth or other materials when in use or shortly after use when the product is still
warm in temperature.
Do not allow the product to maintain contact with the same area of skin for extended periods of time during
use. This may result in low-temperature contact burns, including skin redness and blistering, even if the
product does not feel hot. The use of a tripod or similar equipment is recommended when using the product in
hot places and for people with circulation problems or less sensitive skin.
Keep the product out of the reach of young children.
A strap wrapped around a person’s neck may result in strangulation.
Periodically remove any dust buildup from the power plug and power outlet using a dry cloth.
Follow any indications to turn off the product in places where its use is forbidden. Not doing so may cause
other equipment to malfunction due to the effect of electromagnetic waves and even result in accidents.
217
Handling Precautions and Safety Instructions
CAUTION
Denotes the risk of injury.
Strap is intended for use on the body only. Hanging the strap with any product attached on a hook or other
object may damage the product. Also, do not shake the product or expose the product to strong impacts.
This may cause injury or damage to the product.
Do not leave the product in places exposed to extremely high or low temperatures. The product may become
extremely hot/cold and cause burns or injury when touched.
Only mount the product on a tripod that is sufficiently sturdy.
Camera
Be sure to observe the following precautions to ensure maximum performance.
Do not carry the camera by the LCD panel. Be careful when closing the LCD panel.
Do not leave the camera in places subject to high temperatures (like the inside of a car parked under direct
sunlight), or high humidity.
Do not hold the camera in the same posture for long periods of time as this may cause low-temperature
contact burns. Even if the camera does not feel too hot, prolonged contact with the same body part may
cause skin redness or blistering. The use of a tripod is recommended for people with circulation problems or
very sensitive skin, or when using the camera in very hot places.
Do not use the camera near strong electromagnetic fields such as near powerful magnets and motors, MRI
machines or high-voltage power lines. Using the camera in such places may cause anomalies in the video, or
audio or video noise to appear.
Do not use or store the camera in dusty or sandy places. The camera is not waterproof – avoid also water,
mud or salt. If any of the above should get into the camera it may damage the camera and/or the lens. Consult
a Canon Service Center as soon as possible.
Be careful to avoid dust and dirt particles accumulating on the lens or entering the camera. When you finish
using the camera, make sure to attach the body cap to the lens mount and the lens cap and dust cap to the
lens.
Do not point the camera or viewfinder toward an intense light source, such as the sun on a sunny day or an
intense artificial light source. Doing so may damage the image sensor or the camera’s internal components.
Be careful especially when using a tripod or shoulder strap. When you are not using the camera or viewfinder,
make sure to attach the lens cap to the lens and the viewfinder cap to the viewfinder.
Be careful of heat generated by lighting equipment.
Do not disassemble the camera. If the camera does not function properly, consult qualified service personnel.
Do not touch the lens contacts on the lens mount. Dirty contacts may cause a poor
contact between the camera and the lens resulting in incorrect operation of the
camera. After removing the lens, make sure to attach the body cap to the lens mount
and the lens cap and dust cap to the lens.
Handle the camera with care. Do not subject the camera to shocks or vibration as this
may cause damage. When using the shoulder strap, do not allow the camera to swing
and hit an object.
Long-term storage
If you do not intend to use the camera for a long time, store it in a place free of dust, in low humidity, and at
temperatures not higher than 30 °C (86 °F).
Handling Precautions and Safety Instructions
218
Battery Pack
Dirty terminals may cause a poor contact between the battery pack and the camera. Wipe the terminals with a
soft cloth.
Long-term storage
Store battery packs in a dry place at temperatures no higher than 30
°C (86 °F).
To extend the battery life of the battery pack, discharge it completely before storing it.
Charge and discharge all your battery packs fully at least once a year.
Always attach the battery terminal cover.
Do not allow any metal objects to touch the terminals (Figure 1), as this can
cause a short circuit and damage the battery pack. Attach the terminal cover
whenever the battery pack is not being used (Figure 2).
The battery terminal cover has a [
ð
]-shaped hole. This is useful when you
wish to differentiate between charged and uncharged battery packs. For
example, with charged battery packs, attach the terminal cover so that the
[
ð
]-shaped hole shows the colored label.
Remaining battery time
If the remaining battery time displayed is not correct, deplete the battery pack completely and then charge it fully.
Still, the correct time may not be displayed if a fully charged battery pack is used continuously in high
temperatures or it is left unused for long periods of time. Also, the correct remaining time may not be displayed,
depending on the battery life. Use the time shown on the screen as an approximation.
DANGER!
Treat the battery pack with care.
Keep it away from fire (or it might explode).
Do not expose the battery pack to temperature higher than 60 °C (140 °F). Do not leave it near a heater or
inside a car in hot weather.
Do not try to disassemble or modify it.
Do not drop it or subject it to shocks.
Do not get it wet.
Figure 1 Figure 2
Back side of the
battery pack
Uncharged
Terminal cover attached
Charged
219
Handling Precautions and Safety Instructions
Lithium Button Battery
Do not pick up the battery using tweezers or other metal tools, as this will cause a short circuit.
Wipe the battery with a clean dry cloth to ensure proper contact.
For CA, USA only
Included lithium battery contains Perchlorate Material - special handling may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate/ for details.
Recording Media
We recommend backing up the recordings on the recording media onto your computer. Data may be
corrupted or lost due to defects or exposure to static electricity. Canon shall not be liable for lost or corrupted
data.
Do not touch or expose the terminals to dust or dirt.
Do not use recording media in places subject to strong magnetic fields.
Do not leave recording media in places subject to high humidity and high temperature.
Do not disassemble, bend, drop, or subject recording media to shocks and do not expose them to water.
Check the direction before inserting the recording media. Forcing recording media into the slot if it is not
correctly oriented may damage the recording media or the camera.
Do not attach any labels or stickers on the recording media.
Disposal
When you delete data on the recording media, only the file allocation table is altered and stored data is not
physically erased. Take the necessary precautions when you dispose of the recording media, for example by
physically damaging it to prevent the leakage of private data.
If giving the recording media to another person, initialize it. Fill it up with unimportant recordings, and then
initialize it again. This makes recovering the original recordings very difficult.
Built-in Rechargeable Lithium Battery
The camera has a built-in rechargeable lithium battery to keep the date/time and other settings. The built-in
lithium battery is recharged while you use the camera; however, it will discharge completely if you do not use the
camera for about 3 months.
To recharge the built-in lithium battery: Connect the DC cable and AC adapter to the camera and use a power
outlet to power the camera for 24 hours while it is turned off.
WARNING!
The battery used in this device may present a fire or chemical burn hazard if mishandled.
Do not disassemble, modify, immerse in water, heat above 100 °C (212 °F) or incinerate the battery.
Do not insert the battery into the mouth. If swallowed, seek medical assistance immediately. The battery
case may break and the battery fluids may cause internal injuries.
Keep the battery out of the reach of children.
Do not recharge, short-circuit or insert the battery in the wrong direction.
Dispose of the used battery according to applicable recycling regulations. In Europe, the used battery
should be returned to the supplier for safe disposal.
Maintenance/Others
220
Maintenance/Others
Cleaning
Camera Body
Use a soft, dry cloth to clean the camera’s body. Never use chemically treated cloths or volatile solvents such
as paint thinner.
Lens
Remove any dust or dirt particles using a non-aerosol type blower brush.
Use a clean, soft lens-cleaning cloth to gently wipe the lens. Never use tissue paper.
LCD Screen
Clean the LCD screen using a clean, soft lens-cleaning cloth and commercially available cleaning fluid for
eyeglasses.
Condensation may form on the surface of the screen when the temperature changes suddenly. Wipe it with a
soft dry cloth.
Condensation
Moving the camera rapidly between hot and cold temperatures may cause condensation (water droplets) to form
on its internal surfaces. Stop using the camera if condensation is detected. Continued use may damage the
camera.
Condensation may form in the following cases:
When the camera is moved quickly from cold to warm places
When the camera is left in a humid room
When a cold room is heated rapidly
To avoid condensation
Do not expose the camera to sudden or extreme changes in temperature.
Remove the recording media and battery pack. Then, place the camera in an airtight plastic bag and let it
adjust gradually to temperature changes before removing it from the bag.
When condensation is detected
The precise time required for water droplets to evaporate will vary depending on the location and weather
conditions. As a general rule, wait for 2 hours before resuming use of the camera.
Using the Camera Abroad
Power Sources
You can use the AC adapter to operate the camera and the battery charger to charge battery packs in any
country/region with power supply between 100 and 240 V AC, 50/60 Hz. Consult a Canon Service Center for
information on plug adapters for overseas use.
221
Optional Accessories
Optional Accessories
The following optional accessories are compatible with this camera. The availability differs from area to area.
BP-A30, BP-A60
Battery Pack
CA-A10 AC Adapter CG-A10 Battery Charger
LM-V1 LCD Monitor GR-V1 Camera Grip HDU-2 Handle Unit
EVF-V70 OLED Electronic
Viewfinder*
RD-1 Rod Clamp
RC-V100
Remote Controller
CL-V2 Clamp Base
TB-1 Tripod Adapter Base
CG-A20 Battery Charger
and CA-CP200B
Compact Power Adapter
LA-V1 LCD
Attachment Unit
UN-5 Unit Cable (50 cm, 1.6 ft.)/
UN-10 Unit Cable (1 m, 3.3 ft.)
SU-15 Shoulder Support Unit
IFC-400PCU
USB Cable
GP-E2 GPS Receiver
* When attaching this accessory to the camera, the optional CL-V2 Clamp Base is required.
Optional Accessories
222
For our customers in the USA: Call or visit your local retailer/dealer for genuine Canon video accessories. You
can also obtain genuine accessories for your Canon camera by calling: 1-800-828-4040, Canon U.S.A.
Information Center.
Battery Packs
When you need extra battery packs, select only the BP-A30 or BP-A60 Battery
Pack.
NOTES
You can have the camera’s EF lens mount replaced by a PL lens mount. For details, consult the retail dealer
from whom you purchased the camera or contact a Canon Service Center.
Use of genuine Canon accessories is recommended.
The message [Battery communication error] is displayed if you use a non-genuine Canon battery pack, and
user response is required. Note that Canon shall not be liable for any damages resulting from accidents, such
as malfunction or fire, that occur due to use of non-genuine Canon battery packs.
This mark identifies genuine Canon video accessories. When you use Canon video equipment, we
recommend Canon-brand accessories or products bearing the same mark.
223
Specifications
Specifications
C200 / C200B
System
•Recording System
Movies:
RAW
Video format: Cinema RAW Light
Audio format: Linear PCM, 16 or 24 bit, 48 kHz, 4 channels
File format: CRM (Canon RAW Movie; Canon proprietary file format)
MP4
Video compression: MPEG-4 AVC/H.264
Audio format: MPEG-2 AAC-LC, 16 bit, 48 kHz, 2 channels
Linear PCM, 16 bit, 48 kHz, 4 channels
File format: MP4
XF-AVC
Video compression: MPEG-4 AVC/H.264
Audio format: Linear PCM, 24 bit, 48 kHz, 4 channels
File format: MXF
Photos: DCF (Design rule for Camera File system), compatible with Exif Ver. 2.3, JPEG compression
Video Configuration
1
(recording/playback)
Primary clips:
RAW
Bit rate: 1 Gbps
Resolution: 4096x2160
Color depth: 10 bit or 12 bit (depending on the frame rate)
Frame rate: 59.94P, 50.00P, 29.97P, 23.98P, 25.00P, 24.00P
MP4
Bit rate: 150 Mbps, 35 Mbps
Resolution: 3840x2160, 1920x1080
Color sampling: 4:2:0, 8 bit
Frame rate: 59.94P, 50.00P, 29.97P, 23.98P, 25.00P, 24.00P
XF-AVC
Bit rate: 160 Mbps, 45 Mbps
Resolution: 3840x2160, 1920x1080
Color sampling: 4:2:0, 8 bit
Frame rate: 59.94P, 59.94i, 50.00P, 50.00i, 29.97P, 23.98P, 25.00P, 24.00P
Proxy clips:
MP4
Bit rate: 35 Mbps (Long GOP)
Resolution: 2048x1080
Color sampling: 4:2:0, 8 bit
Frame rate: 59.94P, 50.00P, 29.97P, 23.98P, 25.00P, 24.00P
XF-AVC
Bit rate: 45 Mbps (Long GOP)
Resolution: 2048x1080
Color sampling: 4:2:0, 8 bit
Frame rate: 59.94P, 50.00P, 29.97P, 23.98P, 25.00P, 24.00P
1
Available options may differ depending on the system frequency currently in use.
Specifications
224
Recording Media (not included)
For approximate recording times, refer to the
Reference Tables
(A 230)
Primary clips: CFast 2.0 card, SD card
2
(2 slots)
Proxy clips and photos: SD card
2
(proxy clips: 2 slots, photos: SD card B)
2
SD, SDHC (SD High Capacity) or SDXC (SD eXtended Capacity) memory card. Custom picture files and camera settings can
be saved on and read from the SD card as well.
Image Sensor Super-35mm-equivalent CMOS sensor
Effective pixels (approximate):
When the resolution is 4096x2160, 2048x1080: 8,850,000 pixels (4096x2160)
When the resolution is 3840x2160, 1920x1080: 8,290,000 pixels (3840x2160)
k
Viewfinder: 1.18 cm* (0.46 in.) organic LED display, approx. 1,770,000 dots*, 100% coverage
* When the language is set to simplified Chinese, the values with an asterisk are as follows:
1.09 cm (0.43 in.), approx. 1,555,000 dots.
Lens Mount
Canon EF mount compatible with Canon EF lenses (including EF-S lenses and EF Cinema lenses)
Lens multiplication factor for 35mm equivalent focal length (approximate):
When the resolution is 4096x2160, 2048x1080: 1.460
When the resolution is 3840x2160, 1920x1080: 1.534
Lens Correction
Peripheral illumination/chromatic aberration correction is available for Canon EF lenses
3
3
Some lenses are not compatible with in-camera correction.
Shutter Speed
Speed (1/3-stop increments, 1/4-stop increments), angle, clear scan, slow, off
Iris: Manual (1/2-stop increments, 1/3-stop increments, fine-tuning), push auto iris, automatic aperture
ISO Speed
ISO 100
4
, ISO 125
4
, ISO 160 to ISO 25600, ISO 32000
4
to ISO 102400
4
(1-stop or 1/3-stop increments)
4
With extended ISO/Gain range.
•Gain
[Normal]: –6 dB to 54 dB (3-dB increments)
[Fine]: –2 dB to 54 dB (0.5-dB increments)
•ND Filter: Built-in (Off, 2, 4, 6, 8
5
or 10
5
stops), motor operated
5
With extended ND range.
•Exposure: AE shift, light metering modes (standard, spotlight, backlight)
White Balance
Custom white balance (two sets, A and B); two preset settings (daylight, 5,600 K
6
and incandescent lamp,
3,200 K
6
) ; automatic white balance (AWB); color temperature setting (2,000 K to 15,000 K)
Color temperature and color compensation (CC) adjustment available for all settings except custom white
balance and AWB.
6
Color temperatures are approximate and given for reference purposes only.
Focus
Manual focus, autofocus (one-shot AF, AF-boosted MF, continuous AF, Face AF); face detection and subject
tracking available
AF type: Dual Pixel CMOS AF, contrast-detection AF
Sensor Sensitivity (ISO 800, 2000 lux, 89.9% reflection)
59.94 Hz: F10 (2048x1080 at 59.94P); 50.00 Hz: F11 (2048x1080 at 50.00P)
S/N Ratio (ISO 800, using Canon Log 3 gamma, HDMI output)
53 dB (typical, 3840x2160, at 29.97P (59.94 Hz) or 25.00P (50.00 Hz))
Subject Illumination (ISO 25600, with a f/1.2 lens, 100% output)
59.94 Hz: 0.45 lux (shutter speed 1/30)
50.00 Hz: 0.38 lux (shutter speed 1/25)
225
Specifications
Built-in microphone: Monaural electret condenser microphone
Size of Photos: 3840x2160, 2048x1080, 1920x1080
Wi-Fi
Wireless Standard: IEEE802.11b/g/n (2.4 GHz band), IEEE802.11a/n (5 GHz band)
Connection Methods: Infrastructure (Wi-Fi Protected Setup (WPS), search for access points, manual),
Camera Access Point
Authentication Methods: Open, shared key; WPA-PSK, WPA2-PSK
Encryption Methods: WEP-64, WEP-128, TKIP, AES
Terminals
•SDI Terminal
BNC jack, output only, 0.8 Vp-p / 75 Ω, unbalanced
3G-SDI: SMPTE 424, SMPTE 425, SMPTE ST 299-2
HD-SDI: SMPTE 292, SMPTE ST 299-1
Embedded audio, time code (VITC/LTC)
HDR output (HLG, PQ), LUT (BT.709, ACESproxy) and supplemental displays (superimposed onscreen
displays, magnification, waveform monitor) can also be output.
•HDMI OUT Terminal
HDMI connector, output only
HDR output (HLG, PQ)
Time code and supplemental displays (superimposed onscreen displays, magnification) can also be output.
INPUT Terminals (INPUT 1 and INPUT 2)
XLR 3-pin jack (pin1: shield, pin2: hot, pin3: cold), 2 sets, balanced
Analog Inputs
Sensitivity:
MIC setting: –60 dBu (volume center, full scale –18 dB) / 600 Ω
LINE setting: 4 dBu (volume center, full scale –18 dB) / 10 kΩ
Microphone attenuator: 20 dB
Digital Inputs (AES/EBU)
AES3 standard (48 kHz, 24 bit, 2ch) / 110 Ω
•MIC Terminal
3.5 mm stereo mini-jack, -72 dBV (volume center, full scale -18 dB) / 5.6 kΩ
Microphone attenuator: 20 dB
×
(Headphone) Terminal
3.5 mm stereo mini-jack, -
to -8 dBV (16 Ω load, volume range Min to Max) / 50 Ω or less
USB Terminal
mini-B, Hi-Speed USB, output only
REMOTE Terminal
2.5 mm stereo sub-mini jack
(Ethernet) Terminal
Ethernet, 1000BASE-T compatible
VIDEO Terminal
Proprietary connector for the LM-V1 LCD Monitor
1
or optional EVF-V70 Electronic Viewfinder; output only
Camera Grip Connection Terminal
Proprietary connector for the camera grip unit
1
connection plug
1
Supplied accessory for the C200; optional accessory for the C200B.
Specifications
226
Power/Others
Power Supply (rated)
14.4 V DC (battery pack), 16.7 V DC (DC IN)
Power Consumption
k
with the SDI terminal, LCD screen and viewfinder active
19.3 W (recording at 59.94P; MP4/XF-AVC: 3840x2160, RAW: 4096x2160)
18.5 W (recording at 50.00P; MP4/XF-AVC: 3840x2160, RAW: 4096x2160)
l
with the SDI terminal active
17.5 W (recording at 59.94P; MP4/XF-AVC: 3840x2160, RAW: 4096x2160)
16.6 W (recording at 50.00P; MP4/XF-AVC: 3840x2160, RAW: 4096x2160)
Operating Temperature
0 – 40 °C (32 – 104 °F)
Dimensions (W x H x D)
1
k
Camera unit only: 144 x 153 x 179 mm (5.7 x 6.0 x 7.0 in.)
Configuration with camera grip: 178 x 153 x 204 mm (7.0 x 6.0 x 8.0 in.)
Configuration with camera grip, handle unit, LCD monitor, LCD attachment unit and microphone holder:
335 x 275 x 275 mm (1.1 ft. x 10.8 in. x 10.8 in.)
l
Camera unit only: 144 x 146 x 137 mm (5.7 x 5.7 x 5.4 in.)
Configuration with thumb rest and microphone holder: 169 x 209 x 137 mm (6.7 x 8.2 x 5.4 in.)
1
All dimensions are approximate.
•Weight
2
k
Camera unit only: 1430 g (3.2 lb.)
Camera with handle unit, LCD monitor, LCD attachment unit, camera grip, microphone holder, eye cup and
hex socket head bolt (x1)
3
: 2,745 g (6.1 lb.)
l
Camera unit only: 1,335 g (2.9 lb.)
Configuration with thumb rest and microphone holder
3
: 1,630 g (3.6 lb.)
2
All weights are approximate.
3
Working configuration includes also battery pack (BP-A30), recording media (CFast card), and unit cable (
k
only).
Approximate continuous recording time with a fully charged battery pack:
k
Recording at 59.94P; MP4/XF-AVC: 3840x2160, RAW: 4096x2160
125 min. (supplied BP-A30 battery pack),
270 min. (optional BP-A60 battery pack)
Recording at 50.00P; MP4/XF-AVC: 3840x2160, RAW: 4096x2160
130 min. (supplied BP-A30 battery pack),
280 min. (optional BP-A60 battery pack)
l
Recording at 59.94P; MP4/XF-AVC: 3840x2160, RAW: 4096x2160
145 min. (supplied BP-A30 battery pack),
310 min. (optional BP-A60 battery pack)
Recording at 50.00P; MP4/XF-AVC: 3840x2160, RAW: 4096x2160
155 min. (supplied BP-A30 battery pack),
325 min. (optional BP-A60 battery pack)
227
Specifications
k
Modular Units
LM-V1 LCD Monitor
Includes the LCD panel (touch panel).
•LCD Screen: 10.1 cm (4.0 in.) color LCD, 16:9 aspect ratio, approx. 1,230,000 dots, 100% coverage,
capacitive touch screen operation
VIDEO Terminal
Proprietary connector for connection to the camera; input only
Dimensions (W x H x D): 120 x 75 x 37 mm (4.7 x 3.0 x 1.5 in.)
•Weight: Approx. 185 g (6.5 oz.)
LA-V1 LCD Attachment Unit
Includes pivots that allow for rotation
Dimensions (W x H x D): 143 x 117 x 75 mm (5.6 x 4.6 x 3.0 in.)
•Weight: Approx. 255 g (9.0 oz.)
GR-V1 Camera Grip
Modular unit can be attached at any of 24 positions (6º intervals); includes limited recording controls.
Dimensions (W x H x D): 60 x 124 x 75 mm (2.4 x 4.9 x 3.0 in.)
•Weight: Approx. 260 g (9.2 oz.)
HDU-2 Handle Unit
Offers sockets for attaching additional accessories to the camera.
Dimensions (W x H x D): Approx. 44 x 81 x 156 mm (1.7 x 3.2 x 6.1 in.)
•Weight: Approx. 220 g (7.8 oz.)
CA-A10 AC Adapter
•Rated Input: 100 – 240 V AC, 50/60 Hz, 100 VA (100 V AC) – 124 VA (240 V AC)
•Rated Output: 16.7 V DC, 3.0 A
Operating Temperature: 0 – 40 °C (32 – 104 °F)
Dimensions (W x H x D): Approx. 73 x 40 x 139 mm (2.9 x 1.6 x 5.5 in.)
•Weight: Approx. 450 g (15.9 oz.)
Specifications
228
CG-A20 Battery Charger
•Rated Input: 24 V DC, 1.8 A
•Rated Output: 16.7 V DC, 1.5 A
Operating Temperature: 0 – 40 °C (32 – 104 °F)
Dimensions (W x H x D): 100 x 24 x 100 mm (3.9 x 0.9 x 3.9 in.)
•Weight: Approx. 145 g (5.1 oz.)
CA-CP200B Compact Power Adapter
•Rated Input: 100 – 240 V AC, 50/60 Hz, 90 VA (100 V AC) – 120 VA (240 V AC)
•Rated Output: 24 V DC, 1.8 A
Operating Temperature: 0 – 40 °C (32 – 104 °F)
Dimensions (W x H x D): 67.5 x 37 x 134 mm (2.7 x 1.5 x 5.3 in.)
•Weight: Approx. 290 g (10.2 oz.)
BP-A30 Battery Pack
Battery Type
Rechargeable lithium ion battery, compatible with Intelligent System
Rated Voltage: 14.4 V DC
Operating Temperature: 0 – 40 °C (32 – 104 °F)
Rated Battery Capacity: 3100 mAh / 45 Wh
Dimensions (W x H x D): 41.5 x 45.1 x 69.7 mm (1.6 x 1.8 x 2.7 in.)
•Weight: Approx. 225 g (7.9 oz)
Weight and dimensions are approximate. Errors and omissions excepted.
229
Appendix: Compatible Lenses and Functions
Appendix: Compatible Lenses and Functions
Following is a list of lenses compatible with this camera and the various functions that can be used depending
on the lens. Depending on the lens’s purchase date, you may need to update the lens’s firmware to use these
functions. For details, consult a Canon Service Center.
* Only for lenses compatible with the optional PZ-E1 Power Zoom Adapter.
EF lenses compatible with auto iris:
Prime lenses compatible with the Dual Pixel Focus Guide function:
Lens
Iris control from the camera
Zoom control from
the camera
Manual Push auto iris Automatic
EF lenses Ü Ü
EF lenses compatible with auto iris Ü Ü Ü Ü*
EF Cinema lenses
CN20x50 IAS H/E1 Ü Ü Ü Ü
CN7x17 KAS S/E1
CN-E18-80mm T4.4 L IS KAS S
CN-E70-200mm T4.4 L IS KAS S
Ü Ü Ü Ü
Prime lenses compatible with
Dual Pixel Focus Guide
Lens
Focus control from the camera
Focus guide
Manual One-shot AF
Continuous
AF
Face AF Tracking
EF lenses Ü Ü Ü Ü Ü Ü
EF lenses compatible with auto iris Ü Ü Ü Ü Ü Ü
EF Cinema lenses
CN20x50 IAS H/E1 Ü
CN7x17 KAS S/E1
CN-E18-80mm T4.4 L IS KAS S
CN-E70-200mm T4.4 L IS KAS S
Ü Ü Ü Ü Ü Ü
Prime lenses compatible with
Dual Pixel Focus Guide
Ü
EF24-105mm f/3.5-5.6 IS STM EF-S18-55mm f/4-5.6 IS STM
EF70-200mm f/4L IS II USM EF-S18-135mm f/3.5-5.6 IS STM
EF70-300mm f/4-5.6 IS II USM EF-S18-135mm f/3.5-5.6 IS USM
EF85mm f/1.4L IS USM EF-S35mm f/2.8 MACRO IS STM
EF-S10-18mm f/4.5-5.6 IS STM EF-S55-250mm f/4-5.6 IS STM
EF-S18-55mm f/3.5-5.6 IS STM
CN-E14mm T3.1 L F CN-E50mm T1.3 L F
CN-E20mm T1.5 L F CN-E85mm T1.3 L F
CN-E24mm T1.5 L F CN-E135mm T2.2 L F
CN-E35mm T1.5 L F
Reference Tables
230
Reference Tables
Approximate Recording Time on Recording Media
Primary clips (CFast card; RAW clips)
Primary/Proxy clips (SD card)*
* Times are based on a single recording that continues until the SD card is full.
Charging Times
Use the supplied CG-A20 Battery Charger to charge battery packs. The charging times given in the following
table are approximate and vary according to charging conditions and initial charge of the battery pack.
Bit rate
CFast card capacity
1 Gbps
64 GB 5 min.
128 GB 15 min.
256 GB 30 min.
Format MP4 XF-AVC
Bit rate
SD card capacity
150 Mbps 35 Mbps 160 Mbps 45 Mbps
8 GB 5 min. 25 min. 5 min. 20 min.
16 GB 10 min. 55 min. 10 min. 45 min.
32 GB 25 min. 120 min. 25 min. 90 min.
64 GB 55 min. 240 min. 50 min. 185 min.
128 GB 110 min. 485 min. 105 min. 375 min.
BP-A30 BP-A60
170 min. 300 min.
231
(Ethernet) terminal . . . . . . . . . . . . . . . . . . .168
4K RAW video . . . . . . . . . . . . . . . . . . . . . . . . . .64
4K workflow . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
A
ABB (automatic black balance) . . . . . . . . . . . . .53
Abroad, using the camera . . . . . . . . . . . . . . . .220
Access point . . . . . . . . . . . . . . . . . . . . . .161, 164
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . .221
ACES color, ACESproxy . . . . . . . . . . . . . . . . . .21
AE shift . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75
Air vents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63
Aperture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72
Automatic aperture . . . . . . . . . . . . . . . . .74
Push auto iris . . . . . . . . . . . . . . . . . . . . .74
Assignable buttons . . . . . . . . . . . . . . . . . . . . .125
Audio format . . . . . . . . . . . . . . . . . . . . . . . . . . .99
Audio output channels . . . . . . . . . . . . . . . . . . .157
Audio peak limiter . . . . . . . . . . . . . . . . . . . . . .102
Audio recording . . . . . . . . . . . . . . . . . . . . . . . . .96
Audio recording level . . . . . . . . . . . . . . . . . . . .101
Audio reference signal . . . . . . . . . . . . . . . . . . .105
AWB (auto white balance) . . . . . . . . . . . . . . . . .79
B
Battery pack . . . . . . . . . . . . . . . . . . . . . . .23, 222
Black balance . . . . . . . . . . . . . . . . . . . . . . . . . .53
Browser Remote . . . . . . . . . . . . . . . . . . . . . . .170
Built-in backup battery . . . . . . . . . . . . . . . . . . .219
Button connection mode (WPS) . . . . . . . . . . . .165
C
Camera Access Point . . . . . . . . . . . . . . . . . . .163
Camera grip
1
. . . . . . . . . . . . . . . . . . . . . . . . . . .43
Camera settings . . . . . . . . . . . . . . . . . . . . . . . .137
Canon Log, Canon Log 3 (gamma curves) . . . .133
Canon XF Utility (download) . . . . . . . . . . . . . . .158
CFast card
Compatible CFast cards . . . . . . . . . . . . 47
Initializing . . . . . . . . . . . . . . . . . . . . . . . 50
Inserting/Removing . . . . . . . . . . . . . . . . 48
Recording method . . . . . . . . . . . . . . . . 51
Check marks (%) . . . . . . . . . . . . . . . . . . 108, 146
Cinema RAW Development . . . . . . . . . . . . . . 159
Clips
Adding an $ mark/% mark . . . . 108, 146
Adding/Deleting shot marks . . . . 108, 147
Clip name format . . . . . . . . . . . . . . . . . 61
Deleting . . . . . . . . . . . . . . . . . . . . . . . 147
Displaying clip information . . . . . . . . . . 145
Playback . . . . . . . . . . . . . . . . . . . . . . . 141
Proxy clips . . . . . . . . . . . . . . . . . . . . . 113
Recording . . . . . . . . . . . . . . . . . . . . . . . 55
Recovering . . . . . . . . . . . . . . . . . . . . . . 52
Color bars . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
Color sampling . . . . . . . . . . . . . . . . . . . . . . . . . 65
Color space . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Condensation . . . . . . . . . . . . . . . . . . . . . . . . 220
Connection to external devices . . . . . . . . . . . 152
Continuous recording . . . . . . . . . . . . . . . . . . . 118
Custom displays . . . . . . . . . . . . . . . . . . . . . . . 57
Custom picture . . . . . . . . . . . . . . . . . . . . . . . 129
Main settings . . . . . . . . . . . . . . . . . . . 133
Other settings . . . . . . . . . . . . . . . . . . . 134
Preset settings . . . . . . . . . . . . . . . . . . 129
D
Data Import Utility . . . . . . . . . . . . . . . . . . . . . 158
Date and time . . . . . . . . . . . . . . . . . . . . . . . . . 31
DC IN terminal . . . . . . . . . . . . . . . . . . . . . . . . . 26
Developing RAW clips . . . . . . . . . . . . . . . . . . 159
Direct setting mode . . . . . . . . . . . . . . . . . . . . . 66
Double slot recording . . . . . . . . . . . . . . . . . . . . 51
Drop frame (time code) . . . . . . . . . . . . . . . . . . 93
Dual Pixel Focus Guide . . . . . . . . . . . . . . . . . . 82
E
EF Cinema lenses . . . . . . . . . . . . . . . . . . . . . 229
EF lens mount . . . . . . . . . . . . . . . . . . . . . . . . . 37
EF-S lens correction . . . . . . . . . . . . . . . . . . . . . 39
External recorder . . . . . . . . . . . . . . . . . . 152, 153
Eye cup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Index
1
Supplied accessory for the C200; optional accessory for the C200B.
232
F
Fan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63
Focus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80
AF-boosted MF . . . . . . . . . . . . . . . . . . .84
AF speed . . . . . . . . . . . . . . . . . . . . . . . .85
Continuous AF . . . . . . . . . . . . . . . . . . . .85
Face AF . . . . . . . . . . . . . . . . . . . . . . . . .87
Focus assistance functions . . . . . . . . . .82
Manual focus . . . . . . . . . . . . . . . . . . . . .81
One-shot AF . . . . . . . . . . . . . . . . . . . . . .84
Tracking . . . . . . . . . . . . . . . . . . . . . . . . .88
Frame rate . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64
Frame recording mode . . . . . . . . . . . . . . . . . .116
Free-run (time code) . . . . . . . . . . . . . . . . . . . . .92
FTP transfer . . . . . . . . . . . . . . . . . . . . . . . . . . .182
G
Gain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69
GPS information . . . . . . . . . . . . . . . . . . .111, 179
H
Handle unit
1
. . . . . . . . . . . . . . . . . . . . . . . . . . .28
HDMI OUT terminal . . . . . . . . . . . . . . . . .149, 153
HDR (high dynamic range) output . . . . . . . . . .154
Headphone terminal . . . . . . . . . . . . . . . . . . . .104
I
Index screens
Clips, Photos . . . . . . . . . . . . . . . . . . . .139
Infrastructure . . . . . . . . . . . . . . . . . . . . . . . . . .164
Initializing recording media . . . . . . . . . . . . . . . . .50
INPUT 1/INPUT 2 terminals . . . . . . . . . . . . .96, 99
Interval recording mode . . . . . . . . . . . . . . . . . .117
Iris . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72
ISO speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69
J
Joystick . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Joystick guide . . . . . . . . . . . . . . . . . . . . . . . . .143
K
Key lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
L
Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
LCD attachment unit
1
. . . . . . . . . . . . . . . . . . . .28
LCD monitor
1
. . . . . . . . . . . . . . . . . . . . . . . . . .28
LCD screen . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Lens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Lens correction (chromatic aberration/peripheral
illumination) . . . . . . . . . . . . . . . . . . . . . . . . .39
Lens firmware . . . . . . . . . . . . . . . . . . . . . . . . . .38
Light metering mode . . . . . . . . . . . . . . . . . . . . .76
LUT (lookup table) . . . . . . . . . . . . . . . . . . . . . .155
M
Magnification . . . . . . . . . . . . . . . . . . . . . . . . . . .83
Menu settings . . . . . . . . . . . . . . . . . . . . . . . . .185
Message list . . . . . . . . . . . . . . . . . . . . . . . . . . .211
Metadata . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109
MIC terminal . . . . . . . . . . . . . . . . . . . . . . . . . . .96
Microphone
Attenuator . . . . . . . . . . . . . . . . . . . . . .103
Built-in (monaural) . . . . . . . . . . . . . . . . .103
External . . . . . . . . . . . . . . . . . . . . . .98, 99
Sensitivity . . . . . . . . . . . . . . . . . . . . . . .102
Modular units . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Mounting bracket . . . . . . . . . . . . . . . . . . . . . . . .28
MP4 clip/photo numbering . . . . . . . . . . . . . . . .62
MP4 video . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64
My Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
N
ND filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71
Network connection
Wi-Fi . . . . . . . . . . . . . . . . . . . . . . . . . . .162
Wired (Ethernet) . . . . . . . . . . . . . . . . . .168
Network functions . . . . . . . . . . . . . . . . . . . . . .161
Non-drop frame (time code) . . . . . . . . . . . . . . . .93
O
OK marks ($) . . . . . . . . . . . . . . . . . . . . .108, 146
Onscreen displays . . . . . . . . . . . . . . . . . . .57, 141
Onscreen markers . . . . . . . . . . . . . . . . . . . . . . .90
On-set color grading . . . . . . . . . . . . . . . . . . . . .21
1
Supplied accessory for the C200; optional accessory for the C200B.
233
P
Peaking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83
Phantom power (microphone) . . . . . . . . . . . . . .99
Photos
Deleting . . . . . . . . . . . . . . . . . . . . . . . .122
Recording . . . . . . . . . . . . . . . . . . . . . . .120
Viewing . . . . . . . . . . . . . . . . . . . . . . . . .121
PIN code connection mode (WPS) . . . . . . . . . .165
Playback
Clips . . . . . . . . . . . . . . . . . . . . . . . . . . .141
Photos . . . . . . . . . . . . . . . . . . . . . . . . .121
Power supply . . . . . . . . . . . . . . . . . . . . . . . . . . .23
POWER switch . . . . . . . . . . . . . . . . . . . . . . . . .27
Pre-recording mode . . . . . . . . . . . . . . . . . . . . .115
Proxy clips . . . . . . . . . . . . . . . . . . . . . . . . . . . .113
R
RAW video . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64
Rec run (time code) . . . . . . . . . . . . . . . . . . . . . .92
Recording
Clips . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Photos . . . . . . . . . . . . . . . . . . . . . . . . .120
Simultaneous proxy clip recording . . . .113
Recovering corrupted clips . . . . . . . . . . . . . . . .52
Reference tables (charging and recording times, etc.)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .230
Relay recording . . . . . . . . . . . . . . . . . . . . . . . . .51
Remaining battery . . . . . . . . . . . . . . . . . . .26, 202
Remote controller . . . . . . . . . . . . . . . . . . . . . .123
Remote operation . . . . . . . . . . . . . . . . . .123, 170
REMOTE terminal . . . . . . . . . . . . . . . . . . . . . .123
Resolution (frame size) . . . . . . . . . . . . . . . . . . . .65
Reviewing a clip . . . . . . . . . . . . . . . . . . . . . . . .112
Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .162
Running mode (time code) . . . . . . . . . . . . . . . . .92
S
Safe area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .90
Saving clips to a computer . . . . . . . . . . . . . . . .158
Saving XF-AVC clips . . . . . . . . . . . . . . . . . . . .158
SD card
Compatible SD cards . . . . . . . . . . . . . . .47
Initializing . . . . . . . . . . . . . . . . . . . . . . . .50
Inserting/Removing . . . . . . . . . . . . . . . . .49
Search for access points . . . . . . . . . . . . . . . . 166
Shooting frame rate . . . . . . . . . . . . . . . . . . . . 114
Shot marks . . . . . . . . . . . . . . . . . . . . . . 108, 147
Shutter speed . . . . . . . . . . . . . . . . . . . . . . . . . 67
Slow motion recording mode . . . . . . . . . . . . . 114
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . 223
Status screens . . . . . . . . . . . . . . . . . . . . . . . . 195
System extension terminal . . . . . . . . . . . . . . . 111
System frequency . . . . . . . . . . . . . . . . . . . . . . 64
T
Terminal covers . . . . . . . . . . . . . . . . . . . . . . . . 45
Thumb rest . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Time code . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Tripod . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . 206
Turning the camera on/off . . . . . . . . . . . . . . . . 27
U
User bit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
User memo . . . . . . . . . . . . . . . . . . . . . . . . . . 109
User settings (user names/passwords for
Browser Remote) . . . . . . . . . . . . . . . . . . . 170
V
Video configuration . . . . . . . . . . . . . . . . . . . . . 64
Video format . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Video output configuration . . . . . . . . . . . . . . . 149
VIDEO terminal . . . . . . . . . . . . . . . . . . . . . . . . . 28
Viewfinder
1
. . . . . . . . . . . . . . . . . . . . . . . . . . . 41
W
Waveform monitor . . . . . . . . . . . . . . . . . . . . . 106
White balance . . . . . . . . . . . . . . . . . . . . . . . . . 77
Wide DR . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
WPS (Wi-Fi Protected Setup) . . . . . . . . . . . . . 165
X
XF Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158
XF-AVC video . . . . . . . . . . . . . . . . . . . . . . . . . 64
Z
Zebra pattern . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89, 179
1
k
only.
234
CANON CINEMA EOS LIMITED WARRANTY FOR PRODUCTS PURCHASED IN THE UNITED
STATES
The limited warranty set forth below is given by Canon U.S.A., Inc. (‘Canon USA) with respect to (a) the Canon Cinema EOS Product, and (b) the accessories
for the Canon Cinema EOS Product (if any), packaged with this limited warranty (collectively the “Products”)* and purchased in the United States. This limited
warranty is only effective upon presentation of your Bill of Sale or other proof of purchase. The Products are warranted to the original end-user purchaser,
when delivered in new condition in its original container, under normal use against defective materials or workmanship as follows: Parts: At Canon USAs
option, defective parts will be exchanged for new parts or comparable rebuilt parts for a period of ONE YEAR from the date of original purchase. Labor: For a
period of ONE YEAR from the date of original purchase, labor will be provided free of charge by Canon USAs factory service centers or designated service
facilities located in the United States. When returning Products under this warranty, you must pre-pay the shipping charges, and you must enclose a copy of
the Bill of Sale or other proof of purchase with a complete explanation of the problem. During the ONE-YEAR warranty period, repairs will be made and the
Products will be return-shipped to you free of charge. For repairs after the warranty period is over, you will be given an estimate of the cost of repair and an
opportunity to approve or disapprove of the repair expense before it is incurred. If you approve, repairs will be made and the Products will be returned to you
at your risk and expense. If you disapprove, we will return-ship the Products to you at no charge to you to an address within the United States.
This limited warranty only applies if the Products are used in conjunction with compatible computer equipment and compatible software, as
to which items Canon USA will have no responsibility. Canon USA shall have no responsibility under this limited warranty for use of the
Products in conjunction with incompatible peripheral equipment and/or incompatible software. Non-Canon brand peripheral equipment and
software which may be distributed with, or factory loaded on, the Products, are soldAS IS’ without warranty of any kind by Canon USA,
including any implied warranty regarding merchantability or fitness for a particular purpose. The sole warranty with respect to such non-
Canon brand items is given by the manufacturer or producer thereof.
* Except for the battery pack packaged with the Products, which carries a separate ninety (90) day limited warranty.
In order to obtain warranty service, please contact the authorized Canon retail dealer from whom you purchased the Products or contact the CANON
INFORMATION CENTER AT 855-CINE-EOS (855-246-3367) or on the internet at pro.usa.canon.com/support
. You will be directed to the nearest service
facility for your Products.
This Limited Warranty covers all defects encountered in normal use of the Products and does not apply in the following cases:
A. Loss or damage to the Products due to abuse, mishandling, accident, improper maintenance, use of non-Canon accessories or failure to follow
operating, maintenance or environmental instructions prescribed in Canon USAs user’s manual;
B. If the Products are defective as a result of leaking batteries, sand, dirt or water damage;
C. If defects or damages are caused by the use of parts or supplies (other than those sold by Canon USA) that cause damage to the Products or that
cause abnormally frequent service calls or service problems;
D. If defects or damages are caused by service other than Canon USAs factory service centers or authorized service facilities;
E. Any internal modification to product hardware or firmware;
F. Any applicable fee for Maintenance of the Products;
G. If the Product has had its serial number or dating altered or removed.
This Limited Warranty does not apply to Products purchased outside the United States. This Limited Warranty does not apply to accessories or
consumables not originally packaged with the Product. Please retain this warranty card and your Bill of Sale as a permanent record of your purchase. This
card ensures that you are contacted promptly should there be a safety inspection, modification or Product recall under applicable laws or regulations.
NO IMPLIED WARRANTY, INCLUDING MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLIES TO THE PRODUCTS AFTER THE
APPLICABLE PERIOD OF EXPRESS WARRANTY OR GUARANTY (EXCEPT AS MENTIONED ABOVE) GIVEN BY ANY PERSON, FIRM OR CORPORATION
WITH RESPECT TO THE PRODUCTS SHALL BIND CANON USA (SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED
WARRANTY LASTS, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU). CANON USA SHALL NOT BE LIABLE FOR LOSS OF
REVENUES OR PROFITS, EXPENSE FOR SUBSTITUTE PRODUCTS OR SERVICE, STORAGE CHARGES, LOSS OR CORRUPTION OF DATA, INCLUDING
WITHOUT LIMITATION, LOSS OR CORRUPTION OF DATA STORED ON THE PRODUCTS’ HARD DRIVE, OR ANY OTHER SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO USE THE PRODUCTS, REGARDLESS OF THE LEGAL THEORY ON
WHICH THE CLAIM IS BASED, AND EVEN IF CANON USA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY
OF ANY KIND AGAINST CANON USA BE GREATER THAN THE PURCHASE PRICE OF THE PRODUCTS SOLD BY CANON USA AND CAUSING THE
ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, YOU ASSUME ALL RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO YOU AND
YOUR PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF USE, MISUSE OR INABILITY TO USE THE PRODUCTS NOT CAUSED
DIRECTLY BY THE NEGLIGENCE OF CANON USA (SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU).THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE
OTHER THAN THE ORIGINAL PURCHASER OF THE PRODUCTS OR THE PERSON FOR WHOM IT WAS PURCHASED AS A GIFT.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
CANON U.S.A., INC
USA
&
235
CANON CINEMA EOS LIMITED WARRANTY FOR PRODUCTS PURCHASED IN CANADA
The limited warranty set forth below is given by Canon Canada Inc. (‘Canon Canada’) with respect to (a) the Canon Cinema EOS product, and (b) the
accessories for the Canon Cinema EOS Product (if any), packaged with this limited warranty (collectively the “Products”)* and purchased in Canada. This
limited warranty is only effective upon presentation of your Bill of Sale or other proof of purchase. The Products are warranted to the original end-user
purchaser, when delivered in new condition in its original container, under normal use against defective materials or workmanship as follows: Parts: At
Canon Canada’s option, defective parts will be exchanged for new parts or comparable rebuilt parts for a period of ONE YEAR from the date of original
purchase. Labor: For a period of ONE YEAR from the date of original purchase, labor will be provided free of charge by Canon Canada’s factory service
center or designated service facilities located in Canada. When returning Products under this warranty, you must pre-pay the shipping charges, and you
must enclose a copy of the Bill of Sale or other proof of purchase with a complete explanation of the problem. During the ONE-YEAR warranty period,
repairs will be made and the Products will be return-shipped to you free of charge. For repairs after the warranty period is over, you will be given an
estimate of the cost of repair and an opportunity to approve or disapprove of the repair expense before it is incurred. If you approve, repairs will be made
and the Products will be returned to you at your risk and expense. If you disapprove, we will return-ship the Products to you at no charge to you to an
address within Canada.
This limited warranty only applies if the Products are used in conjunction with compatible computer equipment and compatible software, as to
which items Canon Canada will have no responsibility. Canon Canada shall have no responsibility under this limited warranty for use of the
Products in conjunction with incompatible peripheral equipment and/or incompatible software. Non-Canon brand peripheral equipment and
software which may be distributed with, or factory loaded on, the Products, are sold ‘AS IS’ without warranty of any kind by Canon Canada,
including any implied warranty or condition regarding merchantability or fitness for a particular purpose. The sole warranty with respect to such
non-Canon brand items is given by the manufacturer or producer thereof.
* Except for the battery pack packaged with the Products, which carries a separate ninety (90) day limited warranty.
In order to obtain warranty service, please contact the authorized Canon retail dealer from whom you purchased the Products or contact the CANON
PROFESSIONAL SERVICE CENTRE 1-800-667-2666 or on the internet at www.canon.ca/pro
. You will be directed to the nearest service facility for your
Products.
This Limited Warranty covers all defects encountered in normal use of the Products and does not apply in the following cases:
A. Loss or damage to the Products due to abuse, mishandling, accident, improper maintenance, use of non-Canon accessories or failure to follow
operating, maintenance or environmental instructions prescribed in Canon Canada’s user’s manual;
B. If the Products are defective as a result of leaking batteries, sand, dirt or water damage;
C. If defects or damages are caused by the use of parts or supplies (other than those sold by Canon Canada) that cause damage to the Products or
that cause abnormally frequent service calls or service problems;
D. If defects or damages are caused by service other than Canon Canada’s factory service centers or authorized service facilities;
E. Any internal modification to product hardware or firmware;
F. Any applicable fee for Maintenance of the Products;
G. If the Product has had its serial number or dating altered or removed.
This Limited Warranty does not apply to Products purchased outside Canada. This Limited Warranty does not apply to accessories or consumables not
originally packaged with the Product. Please retain this warranty card and your Bill of Sale as a permanent record of your purchase. This card ensures
that you are contacted promptly should there be a safety inspection, modification or Product recall under applicable laws or regulations.
NO IMPLIED WARRANTY OR CONDITION, INCLUDING MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLIES TO THE
PRODUCTS AFTER THE APPLICABLE PERIOD OF EXPRESS WARRANTY OR GUARANTY (EXCEPT AS MENTIONED ABOVE) GIVEN BY ANY PERSON,
FIRM OR CORPORATION WITH RESPECT TO THE PRODUCTS SHALL BIND CANON CANADA (SOME PROVINCES DO NOT ALLOW LIMITATIONS ON
HOW LONG AN IMPLIED WARRANTY OR CONDITION LASTS, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU). CANON
CANADA SHALL NOT BE LIABLE FOR LOSS OF REVENUES OR PROFITS, EXPENSE FOR SUBSTITUTE PRODUCTS OR SERVICE, STORAGE
CHARGES, LOSS OR CORRUPTION OF DATA, INCLUDING WITHOUT LIMITATION, LOSS OR CORRUPTION OF DATA STORED ON THE PRODUCTS’
HARD DRIVE, OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO USE THE
PRODUCTS, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF CANON CANADA HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST CANON CANADA BE GREATER THAN THE PURCHASE PRICE OF
THE PRODUCTS SOLD BY CANON CANADA AND CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, YOU ASSUME ALL RISK
AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO YOU AND YOUR PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF USE,
MISUSE OR INABILITY TO USE THE PRODUCTS NOT CAUSED DIRECTLY BY THE NEGLIGENCE OF CANON CANADA (SOME PROVINCES DO NOT
ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU).
THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THE PRODUCTS OR THE PERSON FOR
WHOM IT WAS PURCHASED AS A GIFT.
This warranty gives you specific legal rights, and you may also have other rights which vary from province to province.
CANON CANADA INC.
CANADA
PUB. DIE-0504-000F© CANON INC. 2018
The information in this document is verified as of October 2018. Subject to change without notice.
Visit your local Canon website to download the latest version.
USA http://pro.usa.canon.com
CANON U.S.A., INC.
http://pro.usa.canon.com/support
(855) CINE-EOS (855-246-3367)
(USA only)
UNITED KINGDOM
Canon UK Ltd
Unit 160, Centennial Park, Centennial Avenue,
Elstree, Hertfordshire, WD6 3SG
020-7660-0186
Canon Inc.
30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan
Canon Europa N.V.
Bovenkerkerweg 59, 1185 XB Amstelveen, The Netherlands http://www.canon-europe.com
210

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Canon EOS C200B bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Canon EOS C200B in de taal/talen: Engels als bijlage per email.

De handleiding is 15,34 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Canon EOS C200B

Canon EOS C200B Gebruiksaanwijzing - Deutsch - 246 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info