Handleiding Canon Digital IXUS 980 IS (pagina 32 van 170) (Engels)

61649

Verklein

Vergroot

Pagina terug

1/170

Pagina verder

Camera User Guide

ENGLISH

Check if the following items are included in your camera package. If anything

is missing, contact the retailer where you purchased the camera.

• You can use the included memory card to try out your new camera and

take some test shots.

• Adobe Reader is required to view the PDF manuals. Microsoft Word

Viewer 2003 can be installed to view Word manuals (Middle East only).

If this software is not installed on your computer, access the following

web site to download the software:

http://www.adobe.com (in the case of PDF)

http://www.microsoft.com/downloads/ (in the case of Word format)

Checking the Package Contents

Camera

Battery Pack NB-5L

(with Terminal Cover)

Interface Cable

IFC-400PCU

AV Cable

AVC-DC400

Wrist Strap

WS-DC7

Battery Charger

CB-2LX/CB-2LXE

Getting Started Guide

Memory Card

(32 MB)

Canon Digital Camera

Solution Disk

Warranty System

Booklet

Canon Digital Camera Manuals Disk

Test Shots

Take some initial test shots and play them back to make sure the images

were recorded correctly. Please note that Canon Inc., its subsidiaries and

affiliates, and its distributors are not liable for any consequential damages

arising from any malfunction of a camera or accessory, including memory

cards, that results in the failure of an image to be recorded or to be recorded

in a way that is machine readable.

Warning Against Copyright Infringement

The images recorded with this camera are intended for personal use. Do not

record images that infringe upon copyright laws without the prior permission

of the copyright holder. Please be advised that in certain cases the copying

of images from performances, exhibitions, or commercial properties by

means of a camera or other device may contravene copyright or other legal

rights even if the image was shot for personal use.

Warranty Limitations

For information on your camera's warranty, please refer to the Canon

Warranty System Booklet supplied with your camera.

For Canon Customer Support contacts, please see the Warranty System

Booklet.

LCD Monitor

The LCD monitor is produced with extremely high-precision manufacturing

techniques. More than 99.99% of the pixels operate to specification, but

occasionally non-performing pixels may appear as bright or dark dots. The

camera is not damaged. This also has no effect on the recorded image.

Camera Body Temperature

Please take care when operating the camera for an extended period as the

camera body may become warm. The camera is not damaged.

Memory Cards

This camera can use various types of memory cards. These are collectively

referred to as memory cards in this guide.

Read This First

What Do You Want to Do?

● Shoot, leaving it to the camera to make settings . . . . . . . . . . . . 21

● Shoot various scenes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 – 56

- Take good shots of people

- Take good landscapes

- Shoot various other scenes

● Focus on faces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21, 62, 82, 86

● Shoot in places where I cannot use the flash

(turn off the flash) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

● Shoot pictures with me in them too (self-timer). . . . . . . . . . . 61, 62

● Insert the date and time into my shots . . . . . . . . . . . . . . . . . . . . 60

● Take close-up pictures of subjects (macro shooting) . . . . . . . . . 63

● Take close up pictures of subjects using the zoom

(digital macro shooting). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

● Take sepia toned or black and white pictures . . . . . . . . . . . . . . . 73

● Change the size of picture I want to take

(recording pixels). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

● Take pictures continuously . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

● Shoot without camera shake (image stabilization) . . . . . . . . . . 145

● Shoot without camera shake even in low light conditions

(High ISO speed) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56, 70

IF wP

With nightscapes

(p. 54)

At the beach

(p. 55)

With snowscapes

(p. 55)

Kids and pets

(p. 54)

Portraits

(p. 54)

Foliage

(p. 55)

Sunsets

(p. 55)

Aquarium

(p. 56)

Low light

(p. 56)

Indoors

(p. 55)

Fireworks

(p. 56)

Under water

(p. 56)

Shoot

What Do You Want to Do?

● Take pictures using the viewfinder.. . . . . . . . . . . . . . . . . . . . . . . 76

● Take pictures of moving subjects using the viewfinder. . . . . . . . 79

● Continuously focus on subjects that move (Servo AF) . . . . . . . . 84

● Adjust dark subjects and shoot (i-Contrast) . . . . . . . . . . . . . . . . 91

● Look at my pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

● Automatically play back pictures (slideshow) . . . . . . . . . . . . . . 107

● Look at pictures on a TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112

● Quickly search pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . 104, 105

● Erase pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25, 113

● Protect pictures from accidental erasure. . . . . . . . . . . . . . . . . . 117

View

● Shoot movies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

● View movies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Shoot/View Movies

● Easily print pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

● Save images to a computer . . . . . . . . . . . . . . . . . . . . . . . . 31, 128

Save

● Turn off sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

● Use the camera abroad. . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

139

Other

Chapters 1 – 3 explain the basic operations and frequently used functions of

this camera. Chapters 4 and on explain the advanced functions, letting you

learn further as you read each chapter.

Checking the Package Contents .......2

Read This First ..................................3

What Do You Want to Do? ................4

LCD Monitor Precautions...................8

Safety Precautions.............................9

Charging the Battery........................12

Inserting the Battery and Memory

Card .................................................14

Setting the Date and Time ...............17

Setting the Display Language..........19

Pressing the Shutter Button.............20

Taking Pictures ................................21

Viewing Images ...............................24

Erasing Images................................25

Printing Images................................26

Shooting Movies ..............................28

Viewing Movies................................30

Downloading Images to a

Computer .........................................31

Accessories .....................................36

Separately Sold Accessories ...........38

Components Guide..........................40

Information Displayed on the

Screen .............................................42

Indicators .........................................44

m FUNC. Menu – Basic

Operations .......................................45

n MENU – Basic Operations ..46

Changing the Sound Settings ......... 47

Changing the Screen Brightness .... 48

Returning the Camera to Default

Settings ........................................... 49

Formatting Memory Cards .............. 50

Power Saving Function

(Auto Power Down) ......................... 51

Changing the Image Display Time .. 52

Clock Functions............................... 52

K Shooting Various Scenes ...... 54

! Turning the Flash Off.................. 57

i Zooming in More Closely on

Subjects (Digital Zoom)................... 58

Inserting the Date and Time............ 60

Ò Using the Self-Timer................... 61

" Using the Face Self-Timer.......... 62

e Shooting Close-ups (Macro)....... 63

R Zooming In on Close Subjects

(Digital Macro) ................................. 64

G Shooting in Program AE ............. 66

h Turning the Flash On................... 67

u Shooting Far Away Subjects

(Infinity) ........................................... 67

Changing the Recording Pixels

(Image Size).................................... 68

Table of Contents

1 Getting Started ....................11

2 Learning More......................39

3 Shooting Special

Scenes and Using

Common Functions............ 53

4 Making Settings for the

Images You Want................ 65

Table of Contents

Changing the Image Quality

(Compression Ratio) ....................... 68

- Changing the ISO Speed......... 70

Adjusting the Tone

(White Balance) .............................. 71

Adjusting the Brightness

(Exposure Compensation) .............. 72

W Continuous Shooting ................. 72

Changing the Tone of an Image

(My Colors) ..................................... 73

Î Shooting Using the Two Second

Self-Timer ....................................... 74

$ Customizing the Self-Timer ........ 75

Shooting Using the Viewfinder........ 76

Shooting Using a TV ....................... 76

Shoot While Checking

the Histogram.................................. 77

Changing the Composition to Shoot

(Focus Lock) ................................... 78

Shooting with 8 (Quick Shot)..... 79

Changing the AF Frame Mode........ 82

Shooting With Magnified Focus

Display ............................................ 83

% Shooting with AF Lock .............. 84

Shooting with Servo AF .................. 84

f Manual Focus........................... 85

0 Selecting the Person to Focus On

(Face Select)................................... 86

Changing the Metering Mode.......... 87

& Shooting with AE Lock .............. 87

( Shooting with FE Lock .............. 88

~ Flash Exposure Compensation .. 88

D Setting the Shutter Speed and

Aperture Value ................................ 89

Setting the Flash Output.................. 90

@ Adjusting Dark Subjects and

Shooting (i-Contrast) .......................91

Œ Red-Eye Correction ................... 92

Changing the Color and Shooting ... 93

L Shooting Stitch Assist

Images............................................. 96

Changing the Movie Mode .............. 98

Changing the Image Quality............98

AE Lock/Exposure Shift................... 99

Other Shooting Functions.............. 100

Playback Functions ....................... 100

* Editing ....................................... 101

g Search Images by Sets of 9

(Index Display) .............................. 104

d Searching for Images Using the

Jump Display................................. 105

. Viewing Slideshows .................. 107

Checking the Focus or People’s

Expressions (Focus Check) .......... 110

k Magnifying Images ................... 111

+ Changing Image Transitions.....111

Viewing Images on a TV ...............112

/ Erasing All Images.................... 113

: Protecting Images................... 117

; Organizing Images by Category

(My Category)................................119

\ Rotating Images........................ 120

= Resizing Images ....................... 121

[ Trimming ................................... 122

5 Using Advanced Shooting

Functions ............................ 81

6 Using Various

Functions for Shooting

Movies.................................. 97

7 Using Various Playback and

Other Functions ................ 103

Table of Contents

? Adding Effects With the

My Colors Function........................123

@ Adjusting Dark Subjects

(i-Contrast).....................................124

] Correcting Red-Eye Effect.........125

^ Attaching Sound Memos...........127

Transferring Images to a

Computer .......................................128

{ Designating Images for Transfer

(DPOF) ..........................................129

Print List (DPOF) ...........................131

Designating Images for Printing

(DPOF) ..........................................132

_ Sound-Only Recording

(Sound Recorder) ..........................135

Changing Functions.......................138

Changing Shooting Functions ....... 142

Changing Playback Functions....... 146

5 Changing the Start-up Image or

Sound (My Camera Settings)........ 147

Using Household Power................ 150

Using a Supplementary Flash ....... 150

You Think There is a Problem....... 151

List of Messages That Appear

on the Screen................................ 154

Functions Available in Each

Shooting Mode.............................. 156

Menus ........................................... 158

Handling Precautions .................... 162

Specifications ................................ 163

Index ............................................. 166

• Do not sit in a chair with the camera in your pocket.

Doing so may cause malfunction or damage the LCD monitor.

• When putting the camera in your bag, ensure that hard objects

do not come into contact with the LCD monitor.

If this occurs, it may cause malfunction or damage the LCD monitor.

• Do not attach accessories to the strap.

Doing so may cause malfunction or damage the LCD monitor.

8 Customizing the Camera ..137

9 Useful Information for Using

the Camera ........................ 149

LCD Monitor Precautions

•

Before using the camera, please ensure that you read the safety precautions described below

and in the “Safety Precautions” section. Always ensure that the camera is operated correctly.

•

The safety precautions noted on the following pages are intended to prevent injuries to

yourself and other persons, or damage to the equipment.

•

Be sure to also check the guides included with any separately sold accessories you use.

Camera

Battery, Battery Charger

Warnings

Denotes the possibility of serious injury or death.

Cautions

Denotes the possibility of injury or damage to the equipment.

Warnings

• Do not look through the camera viewfinder at bright light sources (the sun,

etc.).

This may damage eyesight.

• Store this equipment out of the reach of children and infants.

Strap: Putting the strap around a child’s neck could result in asphyxiation.

Memory card, day/date battery: Dangerous if accidentally swallowed. If this occurs,

contact a doctor immediately.

• Do not trigger the flash in close proximity to human eyes.

Exposure to the intense light produced by the flash may damage eyesight. In

particular, remain at least one meter (39 inches) away from infants when using the

flash.

• Do not attempt to disassemble or alter any part of the equipment that is not

expressly described in this guide.

• To avoid the risk of injury, do not touch the interior of the camera if it has been

dropped or otherwise damaged.

• Stop operating the camera immediately if it emits smoke, a strange smell, or

otherwise behaves abnormally.

• Do not allow liquids or foreign objects to enter the camera.

This could result in fire or electrical shock.

If liquid or foreign objects come into contact with the camera interior, immediately turn

the camera power off and remove the battery.

• Do not use organic solvents such as alcohol, benzine, or thinner to clean the

equipment.

• Use only recommended power sources.

• Use only recommended batteries.

• Do not place the battery near or in direct flame.

• Do not let the battery come into contact with water (e.g. sea water) or other

liquids.

• Do not attempt to disassemble, alter or apply heat to the battery.

Safety Precautions

• Avoid dropping or subjecting the battery to severe impacts.

This may cause explosions or leaks, resulting in fire, injury and damage to the

surroundings. In the event that a battery leaks and the eyes, mouth, skin or clothing

contacts these substances, immediately flush with water and seek medical assistance.

If the battery charger becomes wet, unplug it from the outlet and consult your camera

distributor or the closest Canon Customer Support Help Desk.

• Unplug the battery charger from the power outlet after recharging is complete,

or when you are not using it.

• Do not place anything, such as cloth on top of the battery charger while it is

charging.

Leaving the unit plugged in for a long period of time may cause it to overheat and

distort, resulting in fire.

• Use only the specified battery charger to charge the battery.

• Do not cut, damage, alter or place heavy items on the power cord.

• Unplug the power cord periodically and wipe away any dust and dirt that has

collected on the plug, the exterior of the power outlet, and the surrounding area.

• Do not handle the power cord with wet hands.

This could result in fire or electrical shock.

• Before you discard batteries, cover the terminals with tape or other insulators.

Contacting other metal materials in waste containers may lead to fire or explosions.

Cautions

• Do not aim the camera at bright light sources (the sun, etc.).

Doing so may cause malfunction or damage the image sensor (CCD).

• Be careful not to bang the camera or subject it to strong impacts or shocks

when hanging it by the strap.

• Be careful not to bump or push strongly on the lens.

This could lead to injury or damage the camera.

• When using the camera on a beach or at a windy location, be careful not to

allow dust or sand to enter the camera.

This may cause the camera to malfunction.

• Do not use the equipment in a manner that exceeds the rated capacity of the

electrical outlet or wiring accessories. Do not use if the power cord or plug are

damaged, or if not fully plugged into the outlet.

• Avoid using, placing or storing the camera in the following places.

- Places subject to strong sunlight.

- Places subject to temperatures above 40° C (104° F).

- Humid or dusty areas.

These could cause leakage, overheating or explosion, resulting in fire, burns or other

injuries. High temperatures may also cause deformation of the casing.

• Do not allow dirt or metal objects (such as pins or keys) to contact the charger

terminals or plug.

This could result in fire, electrical shock or other damage.

• Do not use the flash with dirt, dust or other items stuck to the surface, or when

covering the flash with your fingers or clothing.

This may cause the camera to malfunction.

Getting Started

This chapter explains preparations before shooting, how to shoot in

A mode, and then how to view, erase and print the images you

take. The latter part of this chapter explains how to shoot and view

movies, and how to download images to a computer.

Attaching the Strap/Holding the Camera

• Attach the included strap and place it around your wrist to avoid dropping

the camera during use.

• Keep your arms tight against your body while holding the camera firmly by

the sides. Be sure that your fingers do not block the flash.

Strap

Use the included charger to charge the battery.

Remove the cover.

Insert the battery.

● Align the S marks on the battery and

charger, then insert the battery by sliding it

in and down .

Charge the battery.

● Flip out the plug and plug it into a

power outlet (for CB-2LX).

● Plug the power cord into the charger, then

plug the other end into a power outlet (for

CB-2LXE).

X The charge lamp lights red, and charging

starts.

● The charge lamp will light green when

charging has finished. Charging takes

approx. 2 hours and 5 minutes.

Remove the battery.

● Unplug the battery charger from the power

outlet, then remove the battery by sliding it

in and up .

Charging the Battery

CB-2LX

CB-2LXE

To protect the battery and prolong its life, do not charge it for longer than

24 hours continuously.

Charging the Battery

Approximate Number of Shots That Can Be Taken

* The number of shots that can be taken is based on the Camera & Imaging Products

Association (CIPA) measurement standard.

• Depending on the shooting conditions, the number of shots that can be taken may be

less.

Battery Charge Indicator

An icon or message will appear on the screen (p. 42) indicating the battery’s

charge state.

• Charge the battery on the day, or the day before, it will be used.

Charged batteries continue to discharge naturally even if they are not used.

• How to store the battery for long periods.

Deplete and remove the battery from the camera. Attach the terminal cover and

store the battery. Storing a battery without depleting it for long periods of time

(about one year) may shorten its life span or affect its performance.

• The battery charger can also be used when abroad.

The charger can be used in regions that have 100 – 240 V (50/60 Hz) AC

power. If the plug does not fit the outlet, use a commercially available plug

adapter. Do not use devices such as electrical transformers for foreign travel

because they will cause malfunctions.

• If the battery is quickly depleted even after charging, it has reached the end of its

life span.

Purchase a new battery.

Number of

shots

LCD monitor on.*

280

LCD monitor off. 700

Playback Time (Hours)

Display Summary

Good.

Slightly depleted, but sufficient.

(Blinking red) Nearly depleted.

“Change the battery pack.” Depleted. Recharge the battery.

Using the battery and charger effectively

Attach the cover to a charged battery

so that the S mark is visible.

Insert the included battery and memory card into the camera.

Check the card’s write-protect tab.

● If the memory card has a write-protect tab,

you will not be able to take images if the

tab is in the locked position. Slide the tab

up until you hear a click.

Open the cover.

● Slide the cover , and open it .

Insert the battery.

● Insert the battery as shown until it locks

into place with a click.

● Be sure to insert the battery in the correct

direction or it will not properly lock into

place.

Insert the memory card.

● Insert the memory card as shown until it

locks into place with a click.

● Inserting the card in the wrong direction

could damage the camera. Be sure the

card is oriented correctly.

Inserting the Battery and Memory Card

Terminals

Label

Inserting the Battery and Memory Card

Close the cover.

● Close the cover , and slide it until it

locks into place with a click.

Removing the Battery and Memory Card

Remove the battery.

● Open the cover and press the battery lock

in the direction of the arrow.

X The battery will pop up.

Remove the memory card.

● Push the memory card in until you hear a

click, then slowly release it.

X The memory card will pop up.

Inserting the Battery and Memory Card

Approximate Number of Shots per Memory Card

• Values are based on a camera at default settings.

• The number of shots that can be taken will vary depending on camera settings, the

subject and the memory card used.

You can check the number of shots that can be taken when the camera is in a

Shooting Mode (p. 21).

Compatible Memory Cards

• SD memory cards

• SDHC memory cards

• MultiMediaCards

• MMCplus memory cards

• HC MMCplus memory cards

SD and SDHC memory cards have a write-protect tab. If this tab is in the locked

position, [Card Locked!] will appear on the screen and you will not be able to take

or erase images.

Memory Card 32 MB (Supplied) 2 GB 8 GB

Number of shots

7 516 2063

Can you check the number of shots that can be taken?

What is the write-protect tab?

Number of shots that can be taken

The Date/Time settings menu will appear the first time the camera is turned

on. Since the date and time recorded into your images are based on these

settings, be sure to make them.

Turn on the camera.

● Press the power button.

X The Date/Time settings menu will appear.

Set the date and time.

● Press the qr buttons to select an option.

● Press the op buttons or turn the Â dial

to set a value.

Make the setting.

● Press the m button.

X Once the date and time have been set,

the Date/Time settings menu will close.

● Pressing the power button will turn off the

camera.

Set the correct date and time. If you have not set the date and time, the Date/

Time settings menu will appear each time you turn on the camera.

In Step 2, if you select and press the op buttons, or turn the Â dial, and

set , daylight saving time (plus 1 hour) will be set.

Setting the Date and Time

Reappearing Date/Time settings menu

Daylight saving time settings

Setting the Date and Time

Changing the Date and Time

You can change the current date and time settings.

Display the menus.

● Press the n button.

Select [Date/Time] in the 3 tab.

● Press the qr buttons to select the 3 tab.

● Press the op buttons or turn the Â dial

to select [Date/Time], then press the m

button.

Change the date and time.

● Follow Steps 2 and 3 on p. 17 to make the

setting.

● Pressing the n button will close the

menu.

• The camera has a built-in date/time battery (backup battery) that allows the

date/time settings to be retained about three weeks after the battery pack has

been removed.

• By inserting a charged battery or connecting an AC adapter kit (sold separately)

(p. 38), the date/time battery can be charged in about 4 hours even if the

camera is not turned on.

• If the date/time battery is depleted, the Date/Time menu will appear when you

turn the camera on. Follow the steps on p. 17 to set the date and time.

Date/Time battery

You can change the language displayed in the LCD monitor menus and

messages.

Display the language setting

menu.

● Press the 1 button.

● Press and hold the m button , then

immediately press the n button .

Set the display language.

● Press the opqr buttons or turn the Â

dial to select a language, then press the

m button.

X The displayed language will change.

The clock (p. 52) will display if the time from when you press the m button to

when you press the n button in Step 1 is too long. If the clock appears,

press the m button to remove the clock and perform Step 1 again.

Setting the Display Language

What if the clock appears when the m button is pressed?

You can also change the display language by pressing the n button,

selecting the 3 tab, then selecting the [Language] menu item.

The shutter button has two stops. To take images that are in focus, be sure

to first press the shutter button lightly (halfway) to focus, then take the shot.

Press halfway (lightly to the first

stop).

X The camera focuses and automatically

makes necessary settings for shooting,

such as adjusting brightness and color.

X When the camera focuses, it will beep

twice and the indicator will light green.

Press fully (to the second stop).

X The camera plays the shutter sound and

takes the shot.

● Since the shot is being taken while the

shutter sound plays, be careful not to

move the camera.

• Since the time required to shoot differs depending on the scene you want to

shoot, the length of the shutter sound may change.

• If the camera or subject move while the shutter sound is playing, the recorded

image may be blurry.

Pressing the Shutter Button

Does the length of the shutter sound change?

If you just press the shutter button fully without pausing halfway, the

images you take may not be in focus.

The camera can automatically make all settings so that you can take images

just by pressing the shutter button.

Also, when taking pictures of people, the face will be automatically detected

and focused (p. 82), and the color and the brightness will adjust to the

optimum levels.

Set the A mode.

● Set the mode dial to A.

Compose the shot of your subject.

● Moving the zoom lever towards i will

zoom in on your subject making it appear

larger. Moving the lever towards j will

zoom out from your subject making it

appear smaller.

X When faces are detected, a white frame

appears on the face the camera judges to

be the main subject, while gray frames

appear on other detected faces.

Taking Pictures

Focus.

● Press the shutter button halfway to focus.

X When the camera focuses, it will beep

twice and the indicator will light green

(orange when the flash will fire).

X A green frame will appear where the

camera focused.

X Several AF frames will appear when the

camera focuses on more than one point.

Shoot.

● Press the shutter button fully. The camera

will play the shutter sound and shoot.

X The flash will automatically fire in low light

conditions.

X The indicator will blink green while the

image is recorded to the memory card.

X The image will appear on the screen for

about two seconds.

● Even when an image is displayed, you

can take a second picture by pressing the

shutter button.

AF Frames

Taking Pictures

• Nothing displays when the camera is turned on?

Press the l button to turn on the LCD monitor.

• The camera does not play any sounds?

Pressing the l button while turning on the camera power will turn off all

sounds except for warning sounds. To turn on sound, press the n button,

select the 3 tab, and then select the [Mute]. Use the qr buttons to select [Off].

• The image comes out dark even if the flash fired when shooting?

Subject is too far away for the flash to reach. Shoot within the effective flash

range of approximately 50 cm – 4.6 m (1.6 – 15 ft.) at maximum wide angle, and

approximately 50 cm – 2.4 m (1.6 – 7.9 ft.) at maximum telephoto.

• The indicator blinks yellow, and the camera beeps once when the shutter

button is pressed halfway?

The subject is too close. Back up approximately 50 cm, press the shutter button

halfway, and shoot when the indicator is not blinking yellow.

• The lamp lights when the shutter button is pressed halfway.

To reduce red-eye and to assist in focusing, the lamp may light when shooting in

dark areas (pp. 142 – 143).

• h appears on the screen and the shot cannot be taken even though the

shutter button was pressed fully.

The flash is charging. Keep the shutter button pressed fully, after a while the

indicator will light orange and the camera will take the shot.

What if...

You can view the images you have taken on the screen.

Set the playback mode.

● Press the 1 button.

X The last image you took will appear.

Select an image.

●

Pressing the

button will cycle through the

images in the reverse order they were taken.

● Pressing the r button will cycle through

the images in the order they were taken.

● The images change more quickly if you

keep the qr buttons pressed, but they

will appear coarse.

●

The screen on the left will appear when you

turn the

dial. Turning it counter-clockwise

displays images in the reverse order they

were taken, while turning it clockwise displays

images in the order they were taken.

● The central image will be displayed full-

size when you stop turning the Â dial.

● Pressing the 1 button while the lens is

extended will return you to the shooting

screen.

● When approximately 1 minute elapses,

the lens will retract. If you press the 1

button with the lens retracted, the power

will turn off.

Pressing the 1 button while the camera is off, turns the camera on in playback

mode. Pressing it again turns the camera off. Pressing the shutter button halfway

while in playback mode will bring you to the shooting screen.

Viewing Images

Switching to and from playback mode

You can select and erase images one at a time. Please note that erased

images cannot be recovered. Exercise adequate caution before erasing an

image.

Set the playback mode.

● Press the 1 button.

Select an image to erase.

● Press the qr buttons or turn the Â dial

to display an image to erase.

Erase the image.

● Press the p button.

X [Erase] appears.

● Press the qr buttons or turn the Â dial

to select [Erase], then press the m

button.

X The displayed image will be erased.

● To exit instead of erasing, press the qr

buttons or turn the Â dial to select

[Cancel], then press the m button.

Erasing Images

You can easily print the images you have taken if you connect the camera to

a PictBridge compliant printer (sold separately).

Items to Prepare

• Camera and PictBridge compliant printer (sold separately)

• Interface cable supplied with the camera (p. 2)

Turn off the camera and printer.

Connect the camera to the printer.

● Open the cover, and insert the small end

of the plug firmly into the camera terminal

in the direction shown.

● Insert the cable’s larger plug into the

printer. For connection details, refer to the

user guide provided with the printer.

Turn on the printer.

Press the 1 button and turn on

the camera.

X will appear on the screen, and the

c button will light blue.

Printing Images

Select an image to print.

● Press the qr buttons or turn the Â dial

to select an image.

Print images.

● Press the c button.

X Printing will start and the c button will

blink blue.

● If you want to print additional images,

repeat Steps 5 and 6 after printing has

completed.

● After printing has completed, turn off the

camera and printer, and unplug the

interface cable.

Canon-Brand PictBridge Compliant Printers (Sold Separately)

By connecting your camera to one of the Canon-brand PictBridge compliant

printers below, you can print your images without having to use a computer.

For more information, visit your nearest Canon retailer.

Refer to the Direct Print User Guide for details on printing, including

printing with direct print compatible printers.

Compact Photo Printers

(SELPHY Series)

Inkjet Printers

The camera can automatically make all settings so that you can shoot

movies just by pressing the shutter button.

Set the E mode.

● Set the mode dial to E.

Set the X mode.

● Turn the Â dial to set the mode to X.

Compose the shot of your subject.

● Moving the zoom lever towards i will

zoom in on your subject making it appear

larger. Moving the lever towards j will

zoom out from your subject making it

appear smaller.

Focus.

● Press the shutter button halfway to focus.

X When the camera focuses, it will beep

twice and the indicator will light green.

Shooting Movies

Shooting Time

Shooting Movies

Shoot.

● Press the shutter button fully.

X The camera will start shooting the movie,

and [ Rec.] and the elapsed time will

appear on the screen.

● Once shooting begins, take your finger off

the shutter button.

● If you change the composition of your shot

during shooting, the focus will stay the

same, but the brightness, and tone will

automatically adjust.

● Do not touch the microphone while

shooting.

● Do not press any buttons other than the

shutter button. The sound that buttons

make will be recorded in the movie.

Stop shooting.

● Press the shutter button fully again. The

camera will beep once and stop shooting

the movie.

X The indicator will blink green, and the

movie will record to the memory card.

X Shooting will automatically stop when the

memory card fills.

Estimated Shooting Times

• Shooting times are based on a camera at default settings.

• Shooting time can be checked on the screen in Step 2.

• Max. clip length is approx. 1 hour.

Recording also stops when the file size reaches 4 GB.

Elapsed Time

Microphone

Memory Card 32 MB (Supplied) 2 GB 8 GB

Shooting Time

22 sec. 23 min. 49 sec. 1 hr. 35 min. 11 sec.

You can view the movies you have shot on the screen.

Set the playback mode.

● Press the 1 button.

X The last movie you shot will appear.

X appears on movies.

Select a movie.

● Press the qr buttons or turn the Â dial

to select a movie, then press the m

button.

X The movie control panel will appear on the

screen.

Play the movie.

● Press the qr buttons or turn the Â dial

to select , then press the m button.

X The movie will play.

● You can pause/resume the movie by

pressing the m button again.

● Press the op buttons to adjust the

volume.

Viewing Movies

When watching a movie on a computer, frames may drop, it may not play

smoothly, and the audio may stop suddenly depending on the computer’s

capabilities.

For more information on the movie control panel, refer to p. 101.

You can use the included software to download the images you have taken

to a computer.

Items to Prepare

• Camera and computer

• Canon Digital Camera Solution Disk supplied with the camera (p. 2)

• Interface cable supplied with the camera (p. 2)

System Requirements

Windows

Macintosh

OS Windows Vista (including Service Pack 1)

Windows XP Service Pack 2

Computer model The above OS should be pre-installed on computers with built-in

USB ports.

CPU

Viewing images

Windows Vista: Pentium 1.3 GHz or higher

Windows XP: Pentium 500 MHz or higher

Viewing movies Core2 Duo 1.66 GHz or higher

RAM

Viewing images

Windows Vista: 512 MB or more

Windows XP: 256 MB or more

Viewing movies

1GB or more

Interface USB

Free Hard Disk

Space

Canon Utilities

ZoomBrowser EX: 200 MB or more

PhotoStitch: 40 MB or more

Display 1,024 x 768 pixels/High Color (16 bit) or better

OS Mac OS X (v10.4 – v10.5)

Computer model The above OS should be pre-installed on computers with built-in

USB ports.

CPU Viewing images PowerPC G4/G5 or Intel Processor

Viewing movies Core Duo 1.66 GHz or higher

RAM

Viewing images

Mac OS X (v10.5): 512 MB or more

Mac OS X (v10.4): 256 MB or more

Viewing movies

1GB or more

Interface USB

Free Hard Disk

Space

Canon Utilities

ImageBrowser: 300 MB or more

PhotoStitch: 50 MB or more

Display 1,024 x 768 pixels/32,000 Colors or better

Downloading Images to a Computer

Preparations

Windows XP and Mac OS X (v10.4) are used for these explanations.

Install the software.

Windows

Place the Canon Digital Camera

Solution Disk in the computer’s CD-

ROM drive.

Click [Easy Installation].

●

Follow the onscreen instructions to

proceed with the installation.

When the install finishes, click

[Restart] or [Finish].

Remove the CD-ROM.

●

Remove the CD-ROM when your normal

desktop screen appears.

Macintosh

●

Place the Canon Digital Camera Solution

Disk in the computer’s CD-ROM drive.

● The installer panel appears when you

double-click the icon in the CD-ROM

window.

● Click [Install], and follow the onscreen

instructions to proceed with the

installation.

Downloading Images to a Computer

Connect the camera to the

computer.

● Make sure the camera is turned off before

connecting.

● Open the cover, and insert the small end

of the plug firmly into the camera terminal

in the direction as shown.

● Insert the cable’s larger plug into the

computer’s USB port. For connection

details, refer to the user guide provided

with the computer.

Establish a connection between

the camera and computer.

● Press the 1 button and turn on the

camera.

Open CameraWindow.

Windows

●

Select [Canon CameraWindow] and click

[OK].

X CameraWindow will appear.

● If CameraWindow does not appear, click

the [Start] menu and select [All Programs]

or [Programs], followed by [Canon

Utilities] [CameraWindow]

[CameraWindow] [CameraWindow].

X The Direct Transfer menu appears on the

camera’s screen, and the c button will

light blue.

Downloading Images to a Computer

Macintosh

CameraWindow will appear when you

establish a connection between the

camera and computer.

● If CameraWindow does not appear, click

the [CameraWindow] icon on the Dock

(the bar which appears at the bottom of

the desktop).

X The Direct Transfer menu appears on the

camera’s screen, and the c button will

light blue.

Downloading Images with a Computer

● Click [Transfer Untransferred Images].

X All images not previously downloaded will

be downloaded to the computer.

● After the download finishes, turn off the

camera and unplug the cable.

● For further operations, refer to the

Software Starter Guide.

You cannot shoot while the Direct Transfer menu displays.

Downloading Images to a Computer

Downloading Images with the Camera

Select [New Images].

● Press the op buttons or turn the Â dial

to select [New Images].

● If the screen on the left is not showing,

press the n button.

Download images.

● Press the c button.

X All images that have not already been

transferred to the computer are

transferred.

● After transferring finishes, turn off the

camera and unplug the cable.

● For further operations, refer to the

Software Starter Guide.

Downloaded images will be sorted by date and saved in separate folders

in the “My Pictures” folder for Windows or the “Picture” folder for

Macintosh.

Accessories

Wrist Strap

WS-DC7

Memory Card

(32 MB)

Canon Digital Camera

Solution Disk

AV Cable

AVC-DC400

AC Adapter Kit ACK-DC30

Compact Power Adapter

CA-DC10

Supplied with Camera

*1 Also available for purchase separately.

*2 See the user guide supplied with the printer for more information on the printer and

interface cables.

Battery Pack NB-5L

(with Terminal Cover)

Battery Charger

CB-2LX/CB-2LXE

Power CordDC Coupler

DR-30

Interface Cable

IFC-400PCU

Accessories

High-Power Flash

HF-DC1

Inkjet Printers

Compact Photo Printers

(SELPHY series)

(CP series)

Card Reader

Windows/

Macintosh

Video IN Terminal

Audio IN Terminal

TV/Video

Use of genuine Canon accessories is recommended.

This product is designed to achieve excellent performance when used with genuine

Canon accessories. Canon shall not be liable for any damage to this product and/or

accidents such as fire, etc., caused by the malfunction of non-genuine Canon

accessories (e.g., a leakage and/or explosion of a battery pack). Please note that this

warranty does not apply to repairs arising out of the malfunction of non-genuine Canon

accessories, although you may request such repairs on a chargeable basis.

Waterproof Case

WP-DC27

Waterproof Case

Weight WW-DC1

(Use 1 of 4 included weights)

The following camera accessories are sold separately.

Some accessories are not sold in some regions, or may no longer be

available.

Power Supplies

• AC Adapter Kit ACK-DC30

This kit lets you power the camera using household power. Recommended for

powering the camera for an extended period of time or when connecting to a

computer. Cannot be used to charge the battery inside the camera.

• Battery Charger CB-2LX/CB-2LXE

An adapter for charging Battery Pack NB-5L.

• Battery Pack NB-5L

Rechargeable lithium-ion battery.

Other Accessories

• Waterproof Case WP-DC27

Installing the camera into this waterproof case lets you take underwater shots at

depths down to 40 meters (130 feet), or take worry-free pictures in the rain, at

the beach, or on the ski slopes.

• High-Power Flash HF-DC1

This attachable supplementary flash can illuminate subjects that are too distant

for the light from the built-in flash to reach.

Separately Sold Accessories

Learning More

This chapter explains the parts of the camera and what displays on

the screen, as well as, basic operations.

Conventions Used in this Guide

• Icons are used in the text to represent the camera buttons and dials.

• Language that displays on the screen appears inside [ ].

• The directional buttons, control dial, and FUNC./SET button are

represented by the following icons.

• : Troubleshooting tips.

• : Hints for getting more out of your camera.

• : Things you should be careful about.

• : Supplemental information.

• (p. xx): Reference pages. “xx” stands for page number.

• This chapter assumes all functions are at their default settings.

(Up button)

(FUNC./SET button)

(Right button)

(Left button)

(Down button)

(Control dial)

Mode Dial

Use the mode dial to change shooting modes.

Components Guide

Lamp (AF Assist Beam (p. 143) / Red-

Eye Reduction Lamp (p. 142) / Self-

Timer Lamp (p. 62))

Microphone (p. 29)

Lens

Zoom Lever

Shooting: i (Telephoto) / j (Wide

Angle) (p. 21)

Playback: k (Magnify) / g (Index)

(p. 104)

Shutter Button (p. 20)

Power Button

Speaker

Flash (pp. 57, 67)

Tripod Socket

DC Coupler Terminal Cover (p. 150)

Memory Card / Battery Cover (p. 14)

Strap Mount (p. 11)

Movie Mode

For shooting movies

(pp. 28, 97).

Special Scene Mode

The camera can

automatically make all

settings appropriate for the

scene so that you can take

images just by pressing the

shutter button (p. 54).

Auto Mode

You can shoot, leaving it to

the camera to make settings

automatically (p. 21).

Program AE/Manual Mode

You can shoot in various

different ways, using all of the

camera’s settings (pp. 65, 81).

Quick Shot

You can take pictures

using the viewfinder

without missing a single

shot (p. 79).

Components Guide

Control Dial

When appears on the screen, you can select modes by turning the

control dial.

Even when doesn’t appear, the dial will work in the same way as the

directional keys (p. 39).

Indicators (p. 44)

Screen (LCD Monitor) (p. 42)

c (Print/Share) Button (pp. 26, 145)

Viewfinder (pp. 76, 79)

Mode Dial

1 (Playback) Button (pp. 24, 146)

A/V OUT (Audio/Video Output) and

DIGITAL Terminal

n Button (p. 46)

l (Display) Button (pp. 42, 43)

ISO Speed (p. 70) / d (Jump) (p. 105) /

o Button

e (Macro) (p. 63) / u (Infinity) (p. 67) /

f (Manual Focus) (p. 85) /q Button

Control Dial

m FUNC./SET (Function/Set) Button

(p. 45)

h (Flash) (pp. 57, 67) / r Button

W (Continuous Shooting) (p. 72) / Q

(Self-Timer) (pp. 61, 62) / a (1 Delete

Image) (p. 25) / p Button

Disappears after a

few seconds

Shooting (Information Display)

* : Standard, : Right side down, : Left side down

When shooting, the camera detects if it is held vertically or horizontally, and adjusts

settings accordingly for the best shot. It also detects orientation during playback, so you

can hold the camera in either orientation and it will automatically rotate images for

correct viewing.

This function may not operate correctly when the camera is pointed straight up or down.

Switching the Display

You can change the display using the l button.

Information Displayed on the Screen

Exposure Compensation

(p. 72)

White Balance (p. 71)

My Colors (p. 73)

Flash Exposure

Compensation/

Flash Output (pp. 88, 90)

Metering Modes (p. 87)

Image Quality

(Compression) (p. 68)

Recording Pixels (p. 68)

Histogram (p. 44)

Digital Zoom Magnification

(p. 58) / Digital Tele-

Converter (p. 59)

Macro (p. 63) / Infinity

(p. 67) / Manual Focus

(p. 85)

ISO Speed (p. 70)

Flash Mode (pp. 57, 67)

Red-Eye Correction

(p. 92)

Drive Mode (pp. 61, 62,

72, 75)

Camera Orientation*

Battery Charge Indicator

(p. 13)

Shooting Mode

AF Frame (p. 22)

Spot AE Point Frame (p. 87)

AF Lock (p. 84)

i-Contrast (p. 91)

Create Folder (p. 140)

Recordable Shots (Stills)

(p. 16) / Remaining Time

(Movies) (p. 29)

Disp. Overlay (p. 144)

Shutter Speed (p. 89)

Aperture Value (p. 89)

Time Zone (p. 139)

Image Stabilizer (p. 145)

Date Taken/Recorded

(p. 60)

AE Lock (pp. 87, 99) / FE

Lock (p. 88)

No Information Display Information DisplayDisplay Off

Information Displayed on the Screen

Playback (Detailed Information Display)

Switching the Display

You can change the display using the l button.

Print List (p. 131)

My Category (p. 119)

Shooting Mode

Shutter Speed (p. 89)

Exposure Compensation

(p. 72)

White Balance (p. 71)

Histogram (p. 44)

Image Editing (pp. 120 –

126)

Image Quality

(Compression) (p. 68) /

(Movies) (p. 98)

Recording Pixels (p. 68)

Battery Charge Indicator

(p. 13)

Metering Modes (p. 87)

Folder Number – File

Number (p. 140)

Displayed image number /

Total number of images

ISO Speed (p. 70)

Aperture Value (p. 89) /

Image Quality (Movies) (p. 98)

i-Contrast (p. 124)

Flash Exposure

Compensation/Flash

Output (pp. 88, 90)

Macro / Infinity / Manual

Focus (pp. 63, 67, 85)

File Size (pp. 68, 98)

Recording Pixels (p. 68) /

Elapsed Time (Movies)

(p. 99)

Sound Memo (p. 127)

Protect (p. 117)

My Colors (p. 73)

Red-Eye Correction

(p. 125)

Shooting Date and Time

(p. 60)

No Information

Display

Simple

Information

Display

Focus Check Display

(p. 110)

Detailed Information

Display

Information Displayed on the Screen

Display for Shooting in Dark Conditions during Shooting

The display automatically brightens when shooting in dark conditions,

allowing you to check the composition (Night Display function). However, the

brightness of the image on the screen, and the brightness of the actual

image recorded may be different. Noise may appear and the movement of

the subject on the screen may appear somewhat jagged. This has no effect

on the recorded image.

Overexposure Warning during Playback

In “Detailed Information Display” (p. 43), overexposed areas of the image

flash on the screen.

Histogram

●

The graph that appears in “Detailed Information

Display” (p. 43), and “Shoot While Checking the

Histogram” (p. 77) is called the histogram. The

histogram shows the distribution and amount of

brightness of an image. When the graph

approaches the right side, the image is bright, but

when it approaches the left side, the image is dark,

and in this way you can check the exposure.

The indicators on the back of the camera (p. 41) will light or blink under the

following conditions.

Dark Bright

High

Low

Colors Status Operation Status

Green

Lights Shooting preparation complete (p. 21) / Display Off (p. 138)

Blinks Recording/reading/transmitting image data (p. 21)

Orange

Lights Shooting preparation complete (flash on) (p. 21)

Blinks Camera shake warning (p. 57)

Yellow

Lights e (p. 63)/u (p. 67)/% (p. 84)/f (p. 85)

Blinks Focusing difficulty (p. 23)

When the indicator blinks green, data is being recorded to/read from the

memory card or various information is being transmitted. Do not turn off

the power, open the memory card slot/battery cover, shake or jolt the

camera. These actions may corrupt the image data, or cause the camera

or memory card to malfunction.

Indicators

Commonly used shooting functions can be set with the FUNC. menu. The

menu and menu items differ depending on the Shooting mode (p. 156).

Press the m button.

X The FUNC. menu will appear.

Select a menu item.

X Press the op buttons to select a menu

item.

Select an option.

● Press the qr buttons or turn the Â dial

to select an option.

● For options that display , settings can

also be made by pressing the l

button.

Press the m button.

X The setting will be made and you will

return to the standard shooting screen.

X The setting you made will be displayed on

the screen.

m FUNC. Menu – Basic Operations

Selectable Options

Menu Items

Various functions can be set from the menus. The menu items are organized

under tabs, such as for shooting (4) and playback (1). The menu items

differ depending on the mode (pp. 158 – 161).

Press the n button.

Select a tab.

● Press the qr buttons, or move the zoom

lever (p. 40) left or right to select a tab

(category).

Select a menu item.

● Press the op buttons or turn the Â dial

to select a menu item.

● Some settings can only be set after

switching the screen using the m button.

Select an option.

● Press the qr buttons to select an option.

Press the n button.

● The setting will be made and you will

return to the standard shooting screen.

n MENU – Basic Operations

You can silence the sounds of the camera buttons or adjust the volume of

the camera sounds.

Muting Sounds

● Press the n button and select the 3

tab, then select [Mute] and use the qr

buttons to select [On].

Adjusting the Volume

● Press the n button and select the 3

tab, then select [Volume] and press the

m button.

● Press the op buttons to select an item,

then use the qr buttons or turn the Â

dial to adjust the volume.

Changing the Sound Settings

The screen brightness can be changed in two ways.

With the Menu

● Press the n button, select the 3

tab, select [LCD Brightness] and then

press the m button.

● Press the qr buttons or turn the Â dial

to change the brightness.

● Press the n button again to

complete the setting.

With the l Button

● Press the l button for more than one

second.

X The screen increases to maximum

brightness regardless of the setting in the

3 tab.

● Pressing the l button again for more

than one second will return the screen to

its previous setting.

Changing the Screen Brightness

• The next time you turn on the camera, the screen will be at the

brightness setting selected in the 3 tab.

• You cannot change the brightness of the screen even if you press the

l button if you have already set the brightness to its highest setting

in the 3 tab.

When you have mistakenly made a setting, you can reset the camera to the

default settings.

Select [Reset All].

● Press the n button and select the 3

tab, then select [Reset All] and press the

m button.

Reset the settings.

● Press the qr buttons or turn the Â dial

to select [OK], then press the m button.

X The camera will reset to the default

settings.

• The [Date/Time] (p. 17) in the 3 tab, [Language] (p. 19), [Video System]

(p. 112), [Time Zone] (p. 139).

• The sounds or images registered to the 5 tab (p. 147).

• The saved data for custom white balance (p. 71).

• Colors that were selected in Color Accent (p. 93) or Color Swap (p. 94).

Returning the Camera to Default Settings

Are there functions that cannot be reset?

You should use this camera to format a new memory card, or a memory card

that has been used with other devices, before using it. Formatting

(initializing) a memory card erases all data on the memory card. As you

cannot retrieve the erased data, exercise adequate caution before formatting

the memory card.

Select [Format].

● Press the n button and select the 3

tab, then select [Format] and press the m

button.

Format the memory card.

● Press the qr buttons or turn the Â dial

to select [OK], then press the m button.

X The memory card will be formatted.

X When formatting has finished, the screen

will return to the menu display.

Low Level Format

Perform low level formatting when you think that the recording/reading

speed of a memory card has dropped.

● In Step 2 above, use the op buttons to

select [Low Level Format], then use the

qr buttons or turn the Â dial to display

● Press the opqr buttons to select [OK],

then press the m button.

X Low level formatting starts.

Formatting Memory Cards

• The supplied memory card has already been formatted.

• When the [Memory card error] message appears, or when the camera does not

work correctly, formatting the memory card may solve the problem. Copy the

images from the memory card to a computer or other device before formatting.

To save battery power, the camera shuts down automatically when it is not

operated for a certain time.

Power Saving during Shooting

About 1 minute after the camera is not operated, the monitor will turn off.

After about 3 more minutes, the lens will retract and the power turns off.

When the monitor has turned off but the lens has not retracted yet, pressing the

shutter button halfway (p. 20) turns on the monitor and shooting can be continued.

Power Saving during Playback

About 5 minutes after the camera is not operated, the monitor shuts down

and the power turns off.

About formatting

• Formatting or erasing data on a memory card merely changes the file

management information on the card and does not ensure its contents

are completely deleted. Be careful when transferring or disposing of a

memory card. When disposing of a memory card, take precautions such

as physically destroying the card to prevent personal information leaks.

• When audio (p. 135) is recorded to the memory card, _ will display in

the right hand corner of the screen in Step 2. Formatting the card will

delete audio as well.

• The total capacity of the memory card displayed in the formatting screen

may be less than indicated on the memory card.

• Low level formatting may take longer than standard formatting, since all

recorded data are erased.

• You can stop a low level format of a memory card by selecting [Stop].

You can still use a memory card without problem when formatting is

halted, but its data will be erased.

• You can adjust the time before the monitor turns off (p. 138).

• You can turn off the Power Saving Function (p. 138).

Power Saving Function (Auto Power Down)

Images display for approximately 2 seconds after being shot. You can

change the length of time the images display.

Select [Review].

● Press the n button and select the

4 tab, then use the qr buttons to select

the display time.

● In the playback mode (p. 24) press the

shutter button halfway, and when the

camera changes to shooting mode, press

the n button.

You can check the current time.

● Press the m button until the clock screen

on the left appears.

X The current time will display for

approximately five seconds.

● If you change the camera’s orientation,

press the qr buttons or turn the Â dial,

you can change the color displayed.

● Push the m button to cancel the clock

display.

Press the n button, select the 3 tab, and then select the [Clock Display]

menu item. Use the qr buttons to select a time.

Changing the Image Display Time

Clock Functions

Changing the display time

Press and hold the m button, then press the power button to display the

clock.

Shooting Special Scenes

and Using Common

Functions

This chapter explains how to shoot different scenes using the mode

dial, as well as how to use other common functions, such as the flash

and the self-timer.

• When you select a mode in K mode that matches the scene you want

to take, the camera will automatically make any necessary settings.

Afterwards, you only need to press the shutter button to take the best

shots for the scene.

• This chapter assumes that the mode dial is set to K or that A mode

is set.

• “K Shooting Various Scenes” (pp. 54 – 56) and “R Zooming In on

Close Subjects (Digital Macro)” (p. 64) can only be used in K mode.

The camera will make the necessary settings for the scene you wish to shoot

when you select a matching mode.

Set the mode

dial

(p. 40).

Turn the Â dial to the desired

mode.

Shoot.

I Take portraits (Portrait)

● Produces a soft effect when

photographing people.

F Take snapshots at night

(Night Snapshot)

●

Lets you take beautiful snapshots of people

against city nightscapes or night backgrounds.

●

If you hold the camera firmly, you can take pictures

with reduced camera shake, even without a tripod.

V Take shots of kids and pets

(Kids&Pets)

● Lets you capture subjects that move

around, such as children and pets, without

missing photo opportunities.

K Shooting Various Scenes

H Take indoor shots (Indoor)

● Lets you shoot indoors with natural colors.

U Shoot sunsets (Sunset)

● Lets you take shots of sunsets in vivid

colors.

O Take shots of foliage (Foliage)

● Lets you shoot trees and leaves such as

new growth, autumn leaves or blossoms

in vivid colors.

P Take shots of people and snow

(Snow)

● Lets you take shots of properly lit people

against snowy backgrounds with natural

colors.

w Take shots of people at the

beach (Beach)

● Lets you take shots of properly lit people

near water or sand where reflected

sunlight is strong.

In F, V or H, images may appear rough because the ISO speed (p. 70)

is increased to match the shooting conditions.

K Shooting Various Scenes

t Take shots of fireworks

(Fireworks)

● Lets you take shots of fireworks in vivid

colors.

y Take shots of aquatic life in an

aquarium (Aquarium)

● Lets you shoot aquatic life in indoor

aquariums with natural colors.

S Shoot underwater (Underwater)

● Let’s you shoot underwater with

Waterproof Case WP-DC27 (sold

separately).

Z Shoot using high ISO speed

(ISO3200)

● Sets the ISO speed to 3200, and lets you

shoot without camera shake or subject

blurring even in low light conditions.

● Recording pixels are set to (1600 x

1200 pixels) (p. 68).

• In t, attach the camera to a tripod so that the camera does not move

and blur the image. Additionally, you are recommended to set [IS Mode]

to [Off] (p. 145).

• In y or S, images may appear rough because the ISO speed (p. 70) is

increased to match the shooting conditions.

• In Z, images may appear rough.

You can turn the flash off when shooting.

Press the r button.

Select !.

● Press the qr buttons or turn the Â dial

to select !, then press the m button.

X Once set, ! will appear on the screen.

● After shooting, the camera will return to

When you press the shutter button halfway in low light conditions where camera

shake is likely, the indicator will blink orange and a flashing will appear on the

screen. Attach the camera to a tripod so that the camera does not move.

! Turning the Flash Off

What if the indicator blinks orange and a flashing

appears?

Cannot be set when the shooting mode is set to t or Z (p. 56).

You can use the digital zoom to zoom up to a maximum of 15x and capture

subjects that are too far away for the optical zoom (p. 21) to enlarge. The

images may appear rough, however, depending on the recording pixel

setting (p. 68) and the zoom factor used.

Move the zoom lever toward i.

● Hold the lever until zooming stops.

X If you release the zoom lever, the largest

possible zoom factor without image

deterioration, and will appear.

Move it toward i again.

X The subject will enlarge even more with

the digital zoom, and the zoom factor will

appear in blue.

Zones Where Images Deteriorate

If you keep holding the zoom lever, the zoom will temporarily stop at the point

where the zoom factor is at its maximum without image deterioration. In this is

at 3.7x, in at 4.7x, in at 6.3x, and in at 10x, but in it will zoom up

to 15x without pausing.

i Zooming in More Closely on

Subjects (Digital Zoom)

When the zoom temporarily stops

Recording Pixels Optical Zoom Digital Zoom

: No image deterioration (zoom factor appears white)

: Image deterioration (zoom factor appears blue)

3.7x

6.3x

10x

15x

4.7x

i Zooming in More Closely on Subjects (Digital Zoom)

To turn off the digital zoom, press the n button, select the 4 tab, and then

select the [Digital Zoom] menu item and [Off] option.

Digital Tele-Converter

The focal length of the lens can be increased by an equivalent of 1.7x and

2.2x. This enables a faster shutter speed and less chance of camera shake

than just using zoom (including digital zoom) at the same zoom factor.

The images may appear rough, however, depending on the combination of

recording pixel (p. 68) and digital tele-converter settings used.

● Press the n button and select the

4 tab, then select [Digital Zoom] and use

the qr buttons to select [1.7x] or [2.2x].

● Pressing the n button will return you

to the shooting screen.

X The view will be enlarged, and the

zoom factor will display on the screen.

● To return to standard digital zoom, select

[Standard] in [Digital Zoom].

Combinations that Cause Image Deterioration

• Using [1.7x] at a recording pixel setting of or will cause image

deterioration ( and the zoom factor will display in blue).

• Using [2.2x] at a recording pixel setting of , or will cause image

deterioration ( and the zoom factor will display in blue).

Turning off the digital zoom

The focal length when using digital zoom is 36 – 532 mm (35mm film

equivalent).

• The respective focal lengths when using [1.7x] and [2.2x] are 61.2 –

226.1 mm and 79.2 – 292.6 mm (35mm film equivalent).

• The digital tele-converter cannot be used together with the digital zoom.

You can insert the date and time an image was shot in the lower right corner.

Once inserted, however, they cannot be deleted. Be sure to check

beforehand that the date and time are correctly set (p. 17).

Select [Date Stamp].

● Press the n button and select the

4 tab, then select [Date Stamp] and use

the qr buttons to select [Date] or [Date &

Time].

● Press the n button again to make

the setting.

X [DATE] will appear on the screen.

● If [DATE] does not appear, press the

l button, and set the screen display

to “Information Display” (p. 42).

Shoot.

X You can insert the date and time an image

was shot in the lower right corner.

● When returning to the original setting,

select [Off] in Step 1.

• Use the DPOF print settings (p. 132) to print.

• Use the included software to print.

Refer to the Software Starter Guide for details.

• Connect the camera to a printer to print.

Refer to the Direct Print User Guide for details.

Inserting the Date and Time

Inserting and printing the date and time in images which do

not have an embedded date and time

When the person shooting wishes to join in a group photo, the self-timer can

be used to shoot. Approximately 10 seconds after the shutter button is

pressed, the camera will take the photo.

Press the p button.

Select Ò.

● Press the op buttons or turn the Â dial

to select Ò, then press the m button.

X Once set, Ò will appear.

Shoot.

● Press the shutter button halfway to focus

on the subject, then press fully.

X When the self-timer starts, the lamp blinks

and the self-timer sound plays.

X Two seconds before the shutter releases,

the lamp and sound speed up (the lamp

remains lit when the flash will fire).

● To return to the original setting, select

in Step 2.

Ò Using the Self-Timer

You can change the delay time and number of shots taken (p. 75).

Once you compose the shot, such as for a group photo, and press the

shutter button, the camera will take three shots in a row two seconds after it

detects your face (p. 82) when you enter the scene.

Select ".

● Follow Step 2 on p. 61 and select ".

Compose the scene and press the

shutter button halfway.

● Make sure a green frame appears on the

face of the main subject, and white frames

appear on other faces.

Press the shutter button fully.

X The camera will enter shooting stand-by,

and [Look straight at camera to start count

down] will appear on the screen.

X The lamp blinks and the self-timer sound

plays.

Join the subjects and look at the camera.

X When the camera detects a new face, the

lamp and sound speed up (the lamp

remains lit when the flash will fire), and

two seconds later the shutter releases.

X The second and third shots will continue

to be taken.

● To return to the original setting, select

in Step 2 on p. 61.

Even if your face is not detected after joining the subjects, the shutter will release

approximately 30 seconds later.

For the screen in Step 1, press the

button and select [FaceSelf-Timer] in the

[Drive Settings] screen, then press the

button to change the number of shots.

" Using the Face Self-Timer

What if a face is not detected?

Changing the number of shots

You can shoot an object at a close distance or even shoot extreme close-

ups of it. The possible shooting range is approximately 5 – 50 cm (2.0 in. –

1.6 ft.) from the end of the lens when the zoom lever is moved to the

maximum wide angle, and approximately 40 – 50 cm (1.3 – 1.6 ft.) when the

zoom lever is moved to the maximum telephoto side.

Press the q button.

Select e.

● Press the qr buttons or turn the Â dial

to select e, then press the m button.

X Once set, e will appear.

● To return to the original setting, select .

You are recommended to attach the camera to a tripod and shoot in Î, so that

the camera does not move and blur the image (p. 74).

e Shooting Close-ups (Macro)

Using Î

The edges of the image may darken if the flash fires.

Cannot be set when the shooting mode is set to V (p. 54), U (p. 55) or

t (p. 56).

You can zoom in on subjects and take pictures while close to them. The

possible shooting range is approximately 5 – 50 cm (2.0 in. – 1.6 ft.) (when

moving the zoom lever to the maximum wide angle side as on p. 63) from

the end of the lens, however, you can shoot zooming in even closer to the

subject using the digital zoom.

Using the digital zoom may cause images to come out rough depending on

the recorded pixels (p. 68).

Set the mode dial to K (p. 40).

Turn the Â dial to R.

X The optical zoom will lock at the maximum

wide angle.

Use the zoom lever to compose

the shot.

X The camera will zoom in, and the zoom

factor will appear.

Zones Where Images Deteriorate

• No image deterioration (zoom factor appears white)

• Image deterioration (zoom factor appears blue)

You are recommended to attach the camera to a tripod and shoot in Î, so that

the camera does not move and blur the image (p. 74).

R Zooming In on Close Subjects

(Digital Macro)

Using Î

Making Settings for the

Images You Want

In this chapter you will learn how to use the various functions in G

mode, and methods of shooting in 8 mode to progressively

advance your shooting skills.

• It is assumed that the mode dial is set to 6, and that the camera is in G

mode.

• 6 is an abbreviation for Program AE, and Manual.

• In “Shooting with 8 (Quick Shot)” (p. 79), it is assumed that the mode dial

is set to 8.

• Before attempting to shoot using a function explained in this chapter in

modes other than G mode, check if the function is available in those

modes (pp. 156 – 159)

You can set various functions as you like for shooting.

AE stands for Auto Exposure.

Set the mode dial to 6 (p. 40).

Turn the Â dial to G.

Make settings according to

purpose (pp. 67 – 75).

Shoot.

If a correct exposure cannot be obtained when pressing the shutter button

halfway, shutter speed and aperture value are shown in red. Try the following

settings to obtain the correct exposure.

• Turn on the flash (p. 67)

• Select a higher ISO speed (p. 70)

G Shooting in Program AE

What if shutter speed and aperture value are displayed in

red?

You can make the flash fire every time you shoot. The area that is possible

to shoot with a flash when the zoom lever is moved to j, and the maximum

wide angle is reached is approximately 50 cm – 4.6 m (1.6 – 15 ft.), and

approximately 50 cm – 2.4 m (1.6 – 7.9 ft.) when the maximum telephoto

level is reached.

Select h.

● After pressing the r button, press the qr

buttons or turn the Â dial to select h,

then press the m button.

X Once set, h will appear.

You can shoot landscapes and far away subjects. The focusing range is 3 m

(9.8 ft.) and greater from the camera.

Select u.

● After pressing the q button, press the qr

buttons or turn the Â dial to select u,

then press the m button.

X Once set, u will appear.

h Turning the Flash On

Shooting Far Away Subjects (Infinity)

You can select from six types.

Select the recording pixels.

● Press the m button, then select in the

FUNC. menu.

Select an option.

● Press the qr buttons or turn the Â dial

to select an option, then press the m

button.

X The setting you made will be displayed on

the screen.

You can select from three levels of image quality. They are, in order of

highest to lowest: (Superfine), (Fine), (Normal).

Select the image quality.

● Press the m button, then select in the

FUNC. menu.

Select an option.

● Press the qr buttons or turn the Â dial

to select an option, then press the m

button.

X The setting you made will be displayed on

the screen.

Changing the Recording Pixels (Image Size)

If you select , you cannot use the Digital Zoom (p. 58) or Digital Tele-

Converter (p. 59).

Changing the Image Quality (Compression Ratio)

Approximate Values for Recording Pixels and Image Quality

• The values in the table are according to guidelines set by Canon. The values may

change depending on the subject, memory card, and camera settings.

* The value has been rounded up to two significant figures (CIPA guideline standard).

Approximate Values for Paper Size

● Suitable for sending images as e-mail

attachments.

● For printing on wide size paper.

Recording Pixels

Image

Quality

Single Image

Data Size

(Approx. KB)

Recordable Images/Memory Card

32 MB

(Supplied)

2GB 8GB

(Large)

15 M*/4416 x 3312

6348 4 306 1227

3759 7 516 2063

1797 16 1059 4234

(Medium 1)

9 M/3456 x 2592

3888 7 499 1996

2302 12 841 3364

1100 26 1707 6822

(Medium 2)

5 M/2592 x 1944

2503 11 767 3069

1395 20 1365 5457

695 41 2672 10679

(Medium 3)

2 M/1600 x 1200

1002 29 1862 7442

558 52 3235 12927

278 99 6146 24562

(Small)

0.3 M/640 x 480

249 111 6830 27291

150 171 10245 40937

84 270 15368 61406

(Widescreen)

4416 x 2480

4753 5 409 1637

2814 10 690 2759

1345 21 1396 5581

2L size

A4, Letter size

Postcard size

L size

Select an option.

● After pressing the o button, press the

op buttons or turn the Â dial to select

an ISO speed, then press the m button.

X Once set, the ISO speed will appear on

the screen.

Approximate Values for ISO Speed

• Lowering the ISO speed results in crisper images.

• Raising the ISO speed results in a faster shutter speed, reducing camera shake

and letting the flash reach greater distances to the subject. The images,

however, will appear rough.

- Changing the ISO Speed

Automatically sets the ISO speed for shooting mode and shooting

conditions.

Automatically sets the optimal speed for the shooting mode, shooting

conditions and subject or camera motion.

Depending on the scene, the speed may be set higher than in ISO Auto,

resulting in less subject blur and camera shake.

Low

High

Fine weather condition, outdoor shooting.

Cloudy, Twilight

Night view, Dark indoor

Changing the ISO speed

• When the camera is set to or , you can press the shutter button

halfway to display the automatically set ISO speed.

• In , images may appear rough.

• With ISO3200, you can set an even faster speed (p. 56).

The white balance (WB) function adjusts the optimal white balance for

natural looking colors.

Select the white balance.

● Press the m button, then select in the

FUNC. menu.

Select an option.

● Press the qr buttons or turn the Â dial

to select an option, then press the m

button.

Custom White Balance

You can adjust the white balance to the light source at the shooting location

and shoot with the appropriate color. Make sure that you set the white

balance under the light source of the shooting scene.

● In Step 2 above, select .

● Make sure the entire screen is filled with

the white subject, then press the l

button.

X The tint on the screen will change when

the white balance data is set.

Adjusting the Tone (White Balance)

Auto

Automatically sets the optimal white balance for the shooting

conditions.

Day Light Fine weather condition, outdoor shooting.

Cloudy Cloudy, shady, twilight conditions

Tungsten Tungsten, bulb-type (3-wavelength) fluorescent.

Fluorescent

Warm-white fluorescent, cool-white fluorescent, warm-white-

type (3-wavelength) fluorescent.

Fluorescent H Daylight fluorescent, daylight-type (3-wavelength) fluorescent.

Custom Manually sets the custom white balance.

You can adjust the standard exposure set by the camera in 1/3-stop

increments in the range of -2 to +2.

Select the exposure

compensation.

● Press the m button, then select #.

Adjust the brightness.

● While watching the screen, press the qr

buttons or turn the Â dial to adjust the

brightness and press the m button.

● After the picture has been taken, return

the setting to (zero).

You can shoot continuously (about 1.3 images/second).

Select the drive mode.

● After pressing the p button, press the

op buttons or turn the Â dial to select

W, then press the m button.

Shoot.

X As long as you hold the shutter button

down, the camera will shoot successive

images.

Adjusting the Brightness (Exposure

Compensation)

W Continuous Shooting

• As the number of images increases, the shooting intervals may take

longer.

• If the flash fires, shooting intervals may take longer.

You can change the tone of an image into sepia or black and white when

shooting.

Select My Colors.

● Press the m button, then select in

the FUNC. menu.

Select an option.

● Press the qr buttons or turn the Â dial

to select an option, then press the m

button.

X The setting you made will be displayed on

the screen.

Changing the Tone of an Image (My Colors)

My Colors Off —

Vivid

Emphasizes the contrast and color saturation for a vivid

impression.

Neutral

Tones down the contrast and color saturation for neutral

hues.

Sepia Sepia tones.

B/W Black and white.

Positive Film

Like the Vivid Red, Vivid Green or Vivid Blue effects,

produces intense natural appearing colors like those

obtained with positive film.

Lighter Skin Tone Makes skin tones lighter.

Darker Skin Tone Makes skin tones darker.

Vivid Blue

Emphasizes blue tints. Makes the sky, ocean and other

blue subjects more vivid.

Vivid Green

Emphasizes green tints. Makes mountains, foliage and

other green subjects more vivid.

Vivid Red Emphasizes red tints. Makes red subjects more vivid.

Custom Color (p. 74)

• In and , white balance cannot be set (p. 71)

• In and , colors other than people’s skin color may change. You

may not obtain the expected results depending on the skin color.

Changing the Tone of an Image (My Colors)

Custom Color

The contrast, sharpness, color saturation, red, green, blue, and skin tones in

an image can be chosen and set from 5 different levels.

● Follow Step 2 on p. 73 and select ,

then press the l button.

● Press the op buttons to select an option,

then use the qr buttons or turn the Â

dial to select a value.

● The more to the right, the stronger/deeper

the effect gets, the more to the left, the

weaker/lighter the effect gets.

●

Press the

button to make the setting.

You can set the self-timer to an approximate two second delay.

Display the [Drive Settings]

screen.

● After pressing the p button, immediately

press the n button.

Select Î.

● Press the op buttons or turn the Â dial

to select [Self-Timer].

● Press the qr buttons to select Î, then

press the m button.

● Select the Î in Steps 1 and 2 on p. 61.

Shooting Using the Two Second Self-Timer

You can set the time delay (0 – 30 seconds) and the number of shots (1 – 10

shots).

Display the [Drive Settings]

screen.

● After pressing the p button, immediately

press the n button.

Select $.

● Press the op buttons or turn the Â dial

to select [Self-Timer], then use the qr

buttons to select $.

Make the settings.

● Press the op buttons, or turn the Â

dial to select [Delay] or [Shots].

● Press the qr buttons to select a value,

then press the m button.

● Select the $ in Steps 1 and 2 on p. 61.

• Exposure and white balance settings are fixed to the first shot.

• When you set the time delay for more than 2 seconds, the self-timer lamp and

sound speed up 2 seconds before the shutter releases (when the flash will fire,

the lamp will light).

$ Customizing the Self-Timer

What if the number of shots is set to more than 2 shots?

• If the flash fires, the shooting interval may take longer.

• If you set a high number of shots, the shooting interval may take longer.

• If the memory card becomes full, shooting stops automatically.

If you want to save battery power, you can use the viewfinder for shooting,

instead of the screen (p. 13). Operations for shooting are the same as when

using the screen.

Turn off the screen (p. 42).

● Press the l button to turn off the

screen.

Compose the scene and shoot.

● Use the viewfinder to compose the scene

and shoot.

You can use a TV to display the camera screen.

•

Connect the camera to a TV as described in “Viewing Images on a TV” (p. 112).

• Operations for shooting are the same as when using the camera’s

monitor.

Shooting Using the Viewfinder

The area in the viewfinder and the area in the image taken may differ

slightly.

Shooting Using a TV

You can shoot while checking the brightness distribution of your composition

in the histogram (p. 44) (real time histogram).

Set the display to [Information

Display] (p. 42).

Select [Histogram].

● Press the n button, and select

[Histogram] from the 4 tab, and press

the qr buttons to select [On].

X The histogram will appear and the

brightness distribution in the composition

will display in real time.

Shoot While Checking the Histogram

While you press the shutter button halfway, the focus and exposure are

fixed. You can now recompose and shoot. This is called Focus Lock.

Focus.

● Center the subject you want to shoot, and

press the shutter button halfway.

● Confirm that the AF Frame on the subject

is green.

Recompose.

● Hold the shutter button pressed halfway

and recompose the scene.

Shoot.

● Press the shutter button fully.

Changing the Composition to Shoot (Focus Lock)

Shoot using the viewfinder (p. 76). Since you can keep the focus and

exposure adjusted, even without pressing the shutter button halfway, you

can capture moving subjects without missing a shot.

Set the 8 mode.

● Set the mode dial to 8.

The display will switch to the screen in Step 2.

Make the setting.

●

After pressing the

button, press the

opqr

buttons and select a menu item.

● Turn the Â dial to select an option, and

press the m button.

● If you press the l button, the display

will turn off. If you press it again, the

display will turn back on.

Adjust the focus and exposure.

●

Make sure that the subject is within the viewfinder.

When a person’s face is detected, the focus

and exposure will continue to be adjusted.

When no faces are detected, the focus

and exposure will continue to adjust on the

subject toward the center of the viewfinder.

Shoot.

● If you have a photo opportunity, quickly

press the shutter button all the way after

pressing halfway.

X The image shot will display on the screen.

Shooting with 8 (Quick Shot)

Estimated number of shots in 8

In 8, since the focus and exposure are constantly being adjusted, the

battery will be depleted quicker than usual. Approximately 180 shots are

possible while shooting in this mode.

Settings Screen

The area in the viewfinder and the area in the image taken may differ

slightly.

• If you press the shutter button halfway, the focus will lock (p. 78).

• You cannot shoot with the screen turned on.

Battery Charge Indicator

(p. 13)

Exposure Compensation

(p. 72)

White Balance (p. 71)

My Colors (p. 73)

Histogram (p. 44)

Shutter Speed (p. 89)

Drive Mode (pp. 61, 62,

72, 75)

Aperture Value (p. 89)

Recording Pixels (p. 68)

ISO Speed (p. 70)

AF Lock (p. 84)

AE Lock (pp. 87, 99) / FE

Lock (p. 88)

Flash Mode (pp. 57, 67)

Flash Exposure

Compensation (p. 88)

Image Quality

(Compression) (p. 68)

Camera Orientation

(p. 42)

i-Contrast (p. 91)

Image Stabilizer (p. 145)

Red-Eye Correction

(p. 92)

Shooting Date and Time

(p. 60)

Recordable Shots (p. 16)

You cannot use menu items other than those that display on the settings

screen, or functions that appear when you press the n button

(p. 158).

Using Advanced Shooting

Functions

This chapter serves as the advanced version of Chapter 4 and

explains how to use advanced functions to capture images in exactly

the way you want.

• If the mode dial is set to 6 then it is assumed that the camera is in G

mode.

• “Shoot using the D shutter speed and the aperture value”, “Setting the

flash output” (pp. 89 – 90) are explained assuming that the mode dial is

set to 6, and the camera is in D mode.

• Setting the mode dial to K, and selecting “Changing the Color and

Shooting” (p. 93), “L Shooting Stitch Assist Images” (p. 96), and

various other modes are explained.

• Before attempting to shoot using a function explained in this chapter in

modes other than G mode, check if the function is available in those

modes (pp. 156 – 159).

You can change the AF (Auto Focus) frame mode to match the scene you

want to shoot.

Select [AF Frame].

● Press the n button and select the

4 tab, then select the [AF Frame], then

press the qr buttons to select an option.

Face Detect

• Recognizes people’s faces and focuses, adjusts exposure (evaluative

metering only (p. 87)) and white balance ( only (p. 71)) for shooting.

• When the camera is pointed at subjects, a white frame appears on the

face the camera judges to be the main subject, and gray frames (max. 2)

will appear on other faces. When the shutter button is pressed halfway, up

to 9 green frames will appear on faces the camera focuses on.

AiAF

The camera automatically selects among 9 AF frames to focus with.

Center

The AF frame will be fixed to the center. This is effective for focusing on a

specific point.

Changing the AF Frame Mode

• If a face is not detected and only gray frames (no white frame) appear,

the setting will change to [AiAF].

• Examples of faces that cannot be detected:

• The camera may mistakenly identify non-human subjects as a face.

• If the camera cannot focus when you press the shutter button halfway,

the AF frame will not appear.

• When the display is off (p. 42), settings cannot be made.

If the camera cannot focus when you press the shutter button halfway, the

AF frame will not appear.

• Subjects that are far away or extremely close.

• Subjects that are dark or light.

• Faces turned to the side or at a diagonal, or faces with a portion hidden.

Changing the AF Frame Mode

Press the n button, select the 4 tab, then select the [AF Frame Size] menu

item and [Small] option.

If you press the shutter button halfway using [Face Detect] or [Center] while

in AF frame mode, the AF frame will magnify and check the focus.

Set the AF frame mode to [Face

Detect] or [Center] (p. 82).

Select [AF-Point Zoom].

● Press the n button and select [AF-

Point Zoom] on the 4 tab, use the qr

buttons to select [On].

Focus.

X In [Face Detect], the face selected as the

main subject will appear magnified.

X In [Center], the center AF frame will

appear magnified.

When in [Face Detect] if a face cannot be detected, when a face is too big in

relation to the screen (p. 82), or when in

[Center] and the camera doesn’t focus,

the display will not appear magnified.

You can reduce the AF frame size

If the camera cannot focus when you press the shutter button halfway, the

AF frame will turn yellow.

Shooting With Magnified Focus Display

What if the display does not magnify?

When using Digital Zoom (p. 58), Digital Tele-Converter (p. 59), or when

connected to a TV (p. 76), the magnified display will not appear.

The focus can be locked. After locking the focus, even when releasing your

finger from the shutter button the focal area will not change.

Focus.

● Keep the shutter button pressed halfway

and press the q button

● The focus is locked, then % is displayed

on the screen

●

If you release your finger from the shutter

button, and press the

button once more,

will disappear, and the focus will unlock.

Compose the scene and shoot.

While the shutter button is pressed halfway, the focus will continue to adjust,

allowing you to take pictures of moving subjects without missing a shot.

Set the AF frame mode to [Face

Detect] or [Center] (p. 82).

Select [Servo AF].

● Press the n button and select [Servo

AF] on the 4 tab, and use the qr

buttons to select [On].

Focus.

●

While the shutter button is pressed halfway, the

focus will continue to adjust. In [Face Detect] it

will focus on people’s faces, in [Center] on the

spot where the blue frame appears.

% Shooting with AF Lock

Shooting with Servo AF

• Depending on the scene, the camera may not focus.

• You cannot shoot with the AF lock.

• You cannot set the Servo AF if you have set the [AF-Point Zoom] in the

4 tab to [On].

When not using the auto focus, if you press the shutter button halfway after

roughly focusing manually, you can fine tune the focus.

Press the q button.

Select f.

● Press the qr buttons, or turn the Â dial,

select f and quickly press the o or p

buttons.

● f will appear, and the center AF frame

will display magnified.

Focusing roughly.

● Using the bar that shows the distance

display and AF point zoom as a guide,

press the op buttons, or turn the Â dial

while looking at the magnified display,

adjust the focus roughly and press the m

button.

Fine tuning the focus.

● If you press the shutter button halfway,

you can fine tune the focus.

Press the n button, and select the desired units from [Distance Units] in the

3 tab.

f Manual Focus

Changing the distance display units

• In order to focus accurately, you are recommended to fix the camera to a

tripod.

• Magnified display cannot be used with the digital zoom (p. 58), the digital

tele-converter (p. 59) or when connected to a TV (p. 76), however the

focus can be adjusted.

• When turning off the magnified display in the center of the screen, press

the MENU button, and select [Off] from the 4 tab in [MF-Point Zoom].

You can designate which face to focus on out of a group of people, and

follow that face with in a certain area.

(p. 145).

Press the c button.

X You can follow the face detected as the

main subject within a certain area even

when it moves if a frame appears.

Select the face to focus on.

● If you press the c button, the frame

will move to another face that the camera

has detected.

● When the frame has made a full circuit of

all detected faces, you will be returned to

the AF frame mode screen.

Shoot.

X The frame around the face indicated in

Step 3 will focus.

If a face is not detected, a frame will not appear.

Keeping the c button pressed will display the number of faces detected by the

camera (35 at the most) (green: main subject’s face, white: detected face).

0 Selecting the Person to Focus On

(Face Select)

Frame

What if doesn’t appear?

Confirming the number of detected faces

You cannot use the Digital Zoom (p. 58) or the Digital Tele-Converter

(p. 59).

You can change the metering mode (brightness measuring function) to

match the scene you want to shoot.

Select the metering mode.

● Press the m button, then select in the

FUNC. menu.

Select an option.

●

Press the

buttons or turn the

dial to

select an option, then press the

button.

The setting will be displayed on the screen.

When you will take several shots with the same exposure, you can set the

exposure and focus separately using AE lock. AE stands for “Auto Exposure”.

Set the exposure.

● Point the camera toward the subject for

which you wish to set the exposure, and

while pressing the shutter button halfway,

press the o button.

When

appears, the exposure will be set.

●

If you release your finger from the shutter

button, and press the

button once more,

will disappear, and the AE will unlock.

Compose the scene and shoot.

Changing the Metering Mode

Evaluative

Suitable for standard shooting conditions, including back

lit shots. Automatically adjusts the exposure so that the

subject is always properly lit for the shooting conditions.

Center Weighted Avg.

Averages the light metered from the entire frame, but

gives greater weight to the center.

Spot

Only meters within the (Spot AE Point frame) that

appears at the center of the screen.

& Shooting with AE Lock

Just like with AE lock (p. 87), you can lock the exposure for shooting with the

flash with FE lock. FE stands for “Flash Exposure”.

Select h (p. 67).

Set the exposure.

● Point the camera toward the subject for

which you wish to set the exposure, and

while pressing the shutter button halfway,

press the o button.

X The flash will fire and when ( appears,

the exposure will be set.

●

If you release your finger from the shutter

button, and press the

button once more,

(

will disappear, and the FE will unlock.

Compose the scene and shoot.

Just like with exposure compensation (p. 72), you can adjust the exposure

±2 stops in 1/3-stop increments when using the flash.

Select flash exposure compensation.

● Press the m button, then select ~ in the

FUNC. menu.

Set the exposure compensation.

● Press the qr buttons or turn the

dial

to set the compensation level, and press

the m button.

●

After shooting, return the setting to (zero).

( Shooting with FE Lock

~ Flash Exposure Compensation

You can also set the flash exposure compensation by pressing the

n button, and selecting [Flash Settings] from the 4 tab, and using

the qr buttons.

You can set both the shutter speed and aperture value to achieve the

exposure you want. D stands for “Manual”.

Set the camera to D.

● Set the mode dial to 6, and turn the

dial to select D.

Select Ω.

● Press the m button, and select Ω in the

FUNC. menu.

Make the setting.

●

Turn the

dial to select a shutter speed

(Tv), then press the

buttons to set the

aperture value (Av), and press the

button.

● The set values will synchronize, the

exposure level mark will move, and you

can check how far off the exposure is from

the correct level.

● If the difference from the correct level is

more than ±2, the exposure level mark will

turn red. Pressing the shutter button

halfway will cause [+2] or [-2] to display in

red in the upper left corner of the screen.

Setting the Shutter Speed and Aperture Value

Shutter speed

Aperture value

Correct exposure

indicator

Exposure level mark

When attaching the camera to a tripod for taking shots with long exposure

times, you are recommended to set [IS Mode] to [Off]

(p. 145)

•

The correct exposure is determined by the selected metering mode (p. 87).

• If you use the zoom, or change the composition after making the setting,

the exposure level mark may move.

• The brightness of the screen will change depending on the shutter

speed, and aperture value settings. However, the brightness of the

screen will not change if the flash is set to h.

D Setting the Shutter Speed and Aperture Value

Available Shutter Speeds

•

1/160 indicates 1/160 second, 0"3 indicates 0.3 second and 2" indicates 2 seconds.

•

The fastest shutter speed when using the flash is 1/500 second. The camera

automatically resets the shutter speed to 1/500 second if a faster speed is selected.

Available Aperture Values

• Depending on the zoom position, some aperture values may not be available.

You can select 3 levels of flash output in D mode.

Set the camera to D (p. 89).

Set the camera to h (p. 67).

Set the flash output.

● Press the m button, and select ~ from

the FUNC. menu.

Select the flash output.

● Press the qr buttons, or turn the

dial,

to select the flash output, and press the

m button.

15", 13", 10", 8", 6", 5", 4", 3"2, 2"5, 2", 1"6, 1"3, 1", 0"8, 0"6, 0"5, 0"4, 0"3, 1/4, 1/5, 1/6,

1/8, 1/10, 1/13, 1/15, 1/20, 1/25, 1/30, 1/40, 1/50, 1/60, 1/80, 1/100, 1/125, 1/160, 1/200,

1/250, 1/320, 1/400, 1/500, 1/640, 1/800, 1/1000, 1/1250, 1/1600

F2.8, F3.2, F3.5, F4.0, F4.5, F5.0, F5.8, F8.0, F9.0, F10, F11, F13, F14, F16

Setting the Flash Output

You can also set the flash output by pressing the n button and

selecting [Flash Settings] from the 4 tab. Then press the m button,

select [Flash Output] and press the qr buttons to make the setting.

When people’s faces, or the subject is dark, you can take shots where the

dark portions are detected and automatically brightened.

Select [i-Contrast].

● Press the n button, and select [i-

Contrast] from the 4 tab, and use the

qr buttons to select [Auto].

X @ will appear on the screen.

● If @ does not appear, press the l

button, and switch the screen to

Information Display (p. 42).

@ Adjusting Dark Subjects and

Shooting (i-Contrast)

Depending on the scene, the image may become rough, or not be

adjusted correctly.

You can correct images taken (p. 124).

You can automatically correct images taken with the flash where eyes

appear red.

Select [Flash Settings].

● Press the n button, and select

[Flash Settings] from the 4 tab and press

the m button.

Make the setting.

● Press the op buttons or turn the Â dial

to select [Red-Eye Corr.] then press the

qr buttons to select [On].

X Œ will appear on the screen (p. 42).

● If Œ does not appear, press the l

button, and switch the screen to

Information Display (p. 42).

Œ Red-Eye Correction

Red-eye correction may be applied to other red parts than red eyes. For

example, when red make-up has been used around eyes.

• You can correct images taken (p. 125).

• If you press the r button as shown on the screen in Step 2, and then

press the n button the Flash Settings screen will display.

You can change the look of an image when shooting. However, depending

on the scene, the image may become rough, or the colors may not come out

as expected. We recommend saving the original image as well as the new

one (p. 95).

T Color Accent

You can take shots where only a single chosen color from within the screen

remains, and the rest of the shot changes to black and white.

Select T.

● Set the mode dial to K, turn the Â

dial and select T.

Press the l button.

● The unchanged image, and the Color

Accent image will both display.

● The color for default settings is green.

Indicate the color.

●

Position the center frame so it is filled with the

the color you want, and press the

button.

X The color indicated will be recorded.

Indicated the area to be colored.

●

Press the

buttons or turn the

dial,

and change the area you want to color.

● When you want only the color that you

have chosen to remain, increase the value

of -. When you want to colors to remain

that are close to the color you have

chosen, increase the value of +.

●

Pressing the

button will make the

setting, and will return to the shooting screen.

Changing the Color and Shooting

Recorded color

• Using the flash may cause the image to come out different than

expected.

• Even if you turn off the power, the recorded color will be saved.

Changing the Color and Shooting

Y Color Swap

You can take shots changing the color of an item in the image to another

color. You can only record one other color.

Select Y.

● Set the mode dial to K, turn the Â

dial and select Y.

Press the l button.

● The unchanged image and the Color

Swap image will both display.

● The default settings are to change the

green to gray.

Indicate the color before changing

the image.

● Position the center frame so it is filled with

the color you want, and press the q

button.

X The color indicated will be recorded.

Indicate the desired color to

change the image to.

● Position the center frame so it is filled with

the color you want, and press the r

button.

X The color indicated will be recorded.

Changing the Color and Shooting

Indicate the area to be colored in

the changed image.

●

Press the

buttons or turn the

dial,

and you can change the area to be colored.

● When you want only the color that you

have chosen to remain, increase the value

of -. When you want to colors to remain

that are close to the color you have

chosen, increase the value of +.

●

Pressing the

button will make the

setting, and will return to the shooting screen.

Saving the Original Image

The original image will be saved separately at the same time as the changed

image.

Select [Save Original].

● Press the n button and select [Save

Original] on the 4 tab, use the qr

buttons to select [On].

• Using the flash may cause the image to come out different than

expected.

• Even if you turn off the power, the recorded color and area will be saved.

• Depending on the scene, the image may come out rough.

The changed image will display directly after shooting. If you delete the

image at this time, please take extra care as the changed image will be

deleted along with the original.

• Both images will be recorded with serial numbers.

• Since two images will be made with one shot, the possible shots will be

about half the amount as usual.

Large subjects can be split into several shots that can later be merged

together using the included software on a computer to create a panoramic

image.

Select x or v.

● Set the mode dial to K, turn the Â

dial and select x or v.

Take the first shot.

X The exposure and white balance will be

set with the first shot.

Take the second shot.

● Overlap part of the first shot when taking

the second shot.

● Minor discrepancies in the overlapping

portions will be corrected when the

images are merged.

● You can repeat the procedure for the

second shot to take up to 26 shots.

● When you have finished taking shots,

proceed to Step 4.

Finish shooting.

● Press the m button.

Merge the images with a

computer.

● For details on how to merge the images,

refer to the Software Starter Guide.

L Shooting Stitch Assist Images

This function is not available when shooting while displaying on a

television (p. 76).

Using Various Functions for

Shooting Movies

This chapter serves as the advanced version of Chapter 1’s “Shooting

Movies” and “Viewing Movies” and explains how to use advanced

functions to shoot and view movies.

• This chapter assumes that the mode dial is set to E.

• In this chapter, pictures that are taken as explained in Chapters 3 – 5, will

be called still images.

You can select from three modes.

Set the mode dial to E.

Select a movie mode.

● Turn the Â dial to select a mode.

You can select from two settings.

Select the image quality.

● Press the m button, then select in the

FUNC. menu.

Select an option.

● Press the qr buttons or turn the Â dial

to select an option, then press the m

button.

X The setting you made will be displayed on

the screen.

Changing the Movie Mode

X Standard Normal mode.

> Color Accent

These shooting modes let you change all colors except the

designated color to black and white, or exchange the designated

color for another color, when shooting. See “Changing the Color

and Shooting” (p. 93) for details.

z Color Swap

In > and z, depending on the scene, the shot may not come out as

planned.

Changing the Image Quality

Image Quality Table

Estimated Shooting Time

In X you can set the exposure, or change it in 1/3 steps within a range of ±2.

Focus.

Set the exposure.

● Press the o button to lock the exposure,

the exposure shift bar appears.

●

Press the

button again to release the lock.

Change the exposure.

● While watching the screen, press the qr

buttons or turn the Â dial to adjust the

brightness.

Shoot.

Image Quality

(Recording Pixels/Frame Rate)

Content

640 x 480 pixels, 30 frames/sec. This setting will produce standard movies.

320 x 240 pixels, 30 frames/sec.

Since the number of the recording pixels is

smaller, the image quality will be lower than with

, but you can record three times the length.

Image Quality

(Frame Rate)

Shooting Time

32 MB (Supplied) 2GB 8GB

22 sec. 23 min. 49 sec. 1 hr. 35 min. 11 sec.

1 min. 12 sec. 1 hr. 13 min. 10 sec. 4 hrs. 52 min. 24 sec.

• Based on Canon’s testing standards.

• Max. clip length is approx. 1 hour.

Recording also stops when the file size reaches 4 GB.

• Depending on the memory card, recording may stop even if the max. clip length has

not been reached.

Use of SD Speed Class 4 or higher memory cards is recommended.

AE Lock/Exposure Shift

100

For X mode, the following functions can be used in the same way as for still

images. For > and z modes, the functions with an * attached can be used

in the same way as for still images. See the referred pages for details.

• i Zooming in More Closely on Subjects (Digital Zoom) (p. 58)

You can use the digital zoom, but the optical zoom cannot be used.

If you want to shoot at the maximum magnification, you should adjust the optical

zoom to the maximal factor before shooting.

The sound from the zoom will be recorded.

• Ò Using the Self-Timer (p. 61)*

• e Shooting Close-ups (Macro) (p. 63)*

• u Shooting Far Away Subjects (Infinity) (p. 67)*

• Adjusting the Tone (White Balance) (p. 71)

• Changing the Tone of an Image (My Colors) (p. 73)

• Î Shooting Using the Two Second Self-Timer (p. 74)*

• Shooting Using a TV (p. 76)*

Use the TV controls to adjust the sound volume.

• % Shooting with AF Lock (p. 84)

• f Manual Focus (p. 85)*

• Turning off the AF Assist Beam (p. 143)*

• Displaying the Overlay (p. 144)*

[3:2 Guide] is not available.

• Changing the IS-Mode Settings (p. 145)*

You can switch between [Continuous] and [Off].

• Registering Functions to the c Button (p. 145)*

The following functions can be used in the same way as for still images. For

more information on each function, proceed to the referred pages.

• Erasing Images (p. 25)

• g Search Images by Sets of 9 (Index Display) (p. 104)

• d Searching for Images Using the Jump Display (p. 105)

• . Viewing Slideshows (p. 107)

• + Changing Image Transitions (p. 111)

• Viewing Images on a TV (p. 112)

• / Erasing All Images (p. 113)

• : Protecting Images (p. 117)

• ; Organizing Images by Category (My Category) (p. 119)

• \ Rotating Images (p. 120)

• Transferring Images to a Computer (p. 128)

• { Designating Images for Transfer (DPOF) (p. 129)

Other Shooting Functions

Playback Functions

101

Summary for “Viewing Movies” (p. 30)

You can trim the beginnings and ends of recorded movies in one-second

increments.

Select *.

● Follow Step 3 on p. 30, select * and

press the m button.

X The movie editing panel and the movie

editing bar will display.

Set the editing range.

● Press the op buttons and select or

● Press the qr buttons or turn the Â dial

to move , will display at each one-

second interval. If you select , you can

trim the beginning of the movie from . If

you select , you can trim the end of the

movie from .

Exit

Playback

Slow Motion Playback (you can use the qr buttons to adjust the speed. Sound

will not play back.)

Display the first frame

Previous frame (Rewind if you hold down the m button.)

Next frame (Fast forward if you hold down the m button.)

Display the last frame

Edit

Displays when connected to a PictBridge compliant printer (p. 26).

Refer to the Direct Print User Guide for details.

* Editing

Movie Editing Bar

Movie Editing Panel

* Editing

102

X Even if you move to a point other than a

point, only the portion from the

nearest to the left will be trimmed

when is selected. Only the portion

from the nearest to the right will be

trimmed when is selected.

X The section in light blue designated with

will be the section of the movie that will

remain after editing.

Check the edited movie.

● Press the op buttons to select , then

press the m button. The edited movie will

play.

● To edit the movie again, repeat Step 2.

● To cancel editing, press the op buttons,

and select , then after pressing m

button, press the qr buttons or turn the

Â dial to select [OK], then press the m

button.

Save the edited movie.

● Press the op buttons to select , then

press the m button.

● Press the qr buttons or turn the Â dial

to select [New File], then press the m

button.

X The movie will be saved as a new file.

• When [Overwrite] in Step 4 is selected, the unedited movie is overwritten

with the edited movie, erasing the original movie.

• When there is not enough space left on the memory card, only

[Overwrite] can be selected.

• If the battery is depleted partway through editing, the edited movie clips

may not be saved. When editing movies, you should use a fully charged

battery or the separately sold AC adapter kit (sold separately) (p. 38).

103

Using Various Playback and

Other Functions

The first part of this chapter explains various ways to play back and

edit images. The latter part of this chapter explains how to download

images to a computer, and how to specify images for printing.

It is assumed that the 1 button, has been pressed, and the camera is in

playback mode (p. 24).

• Images that have been edited on a computer, had their file name

changed, or have been taken on a different camera, may not be possible

to play back or edit.

• The edit function (pp. 120 – 127) cannot be used if the memory card

does not have free space available.

104

Displaying 9 images at a time lets you quickly find the image you want.

Move the zoom lever toward g.

X Images will display in an index. The

selected image will have a green frame

and be enlarged.

Select an image.

● Press the opqr buttons or turn the Â

dial and select the image.

● Moving the zoom lever toward k, will

display the selected image.

Searching 9 Images at a Time

Move the zoom lever toward g.

X Images will display in an index.

Move the zoom lever toward g

again.

X The jump bar appears.

Press the qr buttons to change

the displayed images.

● Press the qr buttons or turn the Â dial

to switch between displays of 9 images.

● Moving the zoom lever toward k will

return to the index display.

g Search Images by Sets of 9

(Index Display)

Jump Bar

Holding the m button and pressing the qr buttons will jump to the first or

last set of images.

105

When there are many images on the memory card, you can search them by

a specified method or image unit.

Select a Jump Method

● In Single Image Playback, press the o

button.

● Press the op buttons and select a jump

method.

● If you press the l button, you can

switch between on and off for the

information display.

Search by , , , and

Select a target filter.

● Use the qr buttons to select a filter

(excluding ).

● If you turn the Â dial, images within the

target (in , movies only) will appear.

● Pressing the n button will return you

to single image display.

d Searching for Images Using the Jump

Display

Jump Shot Date Jumps to the first image of each shooting date.

Jump to My Category Displays the first picture in each category (p. 119).

Jump to Folder Jumps to the first image of each folder.

Jump to Movie Jumps to a movie.

Jump 10 Images Jumps over 10 images at a time.

Jump 100 Images Jumps over 100 images at a time.

Target Filters

d Searching for Images Using the Jump Display

106

Viewing images using filter

playback.

● If you press the m button, filter playback

will start, and a blue frame will appear.

● If you press the qr buttons or turn the

Â dial, the target images selected in

Step 1 will display.

● If you press the o button, it will cancel the

filter playback.

Jump by and Images

● If you press the qr buttons, you will jump

to and display the image that is the

selected number of images away.

● If you turn the Â dial, you can switch

images singly.

● Pressing the n button will return you

to single image display.

When you chose in Step 1 on p. 105, if there are no images sorted into

categories, you can only select . Also, when there are only images with the

same date in , and only 1 folder has been created in , you can only select

1 target.

Even in filter playback (Step 2), you can view filtered images with “g Search

Images by Sets of 9 (Index Display)” (p. 104), “. Viewing Slideshows” (p. 107),

and “k Magnifying Images” (p. 111). However, if you change the category

(p. 119), or edit an image and save it as a new image (p. 121), [Display all

images] will display, and filter playback will cancel.

What if you can’t select a target?

Filter playback

107

You can automatically playback images and movies recorded to a memory

card. Each image displays for approximately 3 seconds.

Select [Slide Show].

● Press the n button and select the 1

tab, then select [Slide Show] and press

the m button.

Select [Start].

● Press the qr buttons or turn the Â dial

to select [Start], then press the m button.

X A few seconds after [Loading image…]

displays, the slideshow will start.

● You can pause/restart a slideshow by

pressing the m button again.

● Press the n button to stop the

slideshow.

Changing Settings

You can change the time that images are displayed, and set the slide show

to repeat.

Select [Set up].

● Follow Step 2 above, select [Set up] and

press the m button.

Make the setting.

● Press the op buttons and select an item,

then press the qr buttons, or turn the Â

dial and make the setting.

● Pressing the n button will return you

to the slide show screen.

. Viewing Slideshows

• If you press the qr buttons or turn the Â dial during playback the

image will switch, if you press and hold down the qr buttons you can

fast-forward through images.

• Power saving function does not work during slideshows (p. 51).

. Viewing Slideshows

108

Selecting Images for Playback

Select the Classification

You can select images by classification, group them together and play them back.

Select , ;, or .

● Follow Step 2 on p. 107, press the

opqr buttons or turn the Â dial to

select , ;, or and press the m

button.

Select a menu item.

●

Press the

buttons or turn the

dial,

select the items to set and press the

button.

● If you press the qr buttons, you can

make the images in the items display.

X Once set, will appear on the screen.

● If you press the m button once more,

selection will cancel.

● Playback will occur in the order the

images were chosen.

●

Press the

button to complete the setting.

●

Follow Step 2 on p. 107 to play back images.

Single Image Selection

You can select the images you want to play one by one, sort them into

custom 1 to 3 and play them back.

Select .

● Follow Step 2 on p. 107, press the

opqr buttons or turn the Â dial to

select , and press the m button.

● At first, only will display. When you set

, will be come selectable. When

you set , will be come selectable.

. Viewing Slideshows

109

Select an image.

● Press the qr buttons or turn the Â dial,

select the image and press the m button.

● Once set, and the selected order

number will appear on the screen.

● If you press the m button once more,

selection will cancel.

● When selecting multiple images, repeat

the operation above (maximum of 998

images).

● Playback will occur in the order the

images were chosen.

● Press the n button to complete the

setting.

● Follow Step 2 on p. 107 to play back

images.

Select All Images

You can collect all of the images and designate them as custom 1 to 3.

Select [Mark all].

● Follow Step 2 on p. 107, and after

selecting , press the op buttons,

select [Mark all] and press the m button.

Select.

● Press the op buttons, select [Mark all]

and press the m button.

● Press the qr buttons, select [OK] and

press the m button.

● To cancel [Mark all], select [Reset] from

the above step.

. Viewing Slideshows

110

Changing the Effect

You can select an effect to use when switching images.

●

Press the

buttons, and select and press the

buttons or turn the

dial to select an item.

X When you select an item, an image with

the effect you selected will appear.

● will display without an effect.

●

Play the images following the operations in Step 2 on p. 107.

The location of the AF frame when focused for a shot, or the shot of a

detected face can be magnified.

Press the

button, and switch

to the focus check display (p. 43).

A white frame will appear where you focused

the AF frame upon shooting, or on a face.

X A gray frame will appear on a face

detected during playback.

X The place where the orange frame

appears will magnify.

Change the place to be magnified.

● Pressing the m button will move you to a

different white frame.

Change the magnification rate or location.

● Move the zoom lever toward k once.

● If you press the opqr buttons, the

location of the display will move.

●

If you move the zoom lever toward

, the image will

magnify, if you move it toward

, it will reduce in size.

●

Pressing the

button will return you to Step 2.

Checking the Focus or People’s

Expressions (Focus Check)

111

Move the zoom lever toward k.

● The enlarged display will appear, and if

you continue to hold the zoom lever the

image will magnify up to a maximum

factor of approximately 10x.

● If you press the opqr buttons, you can

move the location of the displayed area.

● Move the zoom lever toward g to reduce

the magnification or return to Single

Image Playback.

● If you turn the Â dial, you can switch

images while they are still enlarged.

You can select from three transition effects when switching between movies

or images in single image playback.

Select [Transition].

● Press the n button and select the 1

tab, then select [Transition] and use the

qr buttons to select the desired

transition.

X Press the n button to make the

setting.

k Magnifying Images

Approximate Location

of Displayed Area

+ Changing Image Transitions

Immediately switches between images without transition effect.

The next images will gradually appear.

Switches between images by sliding them left or right when the qr buttons

are pressed.

112

Using the supplied AV cable, you can connect the camera to a TV to view

images or movies you have shot.

Items to Prepare

• Camera and TV

• AV cable supplied with the camera (p. 2)

Turn off the camera and TV.

Connect the camera to the TV.

● Open the camera’s terminal cover and

fully insert the plug of the supplied AV

cable into the camera’s A/V OUT terminal.

● Insert the cable plug fully into the video

input terminals as shown in the illustration.

Turn on the TV and switch it to the

input that the cable is connected

to.

Press the camera’s 1 button and

turn on the power.

X The image will appear on the TV (nothing

will appear on the monitor of the camera).

● After you finish viewing, turn off the

camera and TV, and unplug the AV cable.

If the camera’s video output system (NTSC/PAL) does not match the TV’s,

images will not display correctly. Press the n button, and use the [Video

System] menu item on the 3 tab to switch to the correct video system.

Viewing Images on a TV

Yellow

Black

Red or black

What if the images don’t properly display on the TV?

113

You can select images or movies and erase them in groups. Since erased

images or movies cannot be recovered, exercise adequate caution before

erasing. However, protected images and movies (p. 117) cannot be erased.

Select [Erase].

● Press the n button, and select

[Erase] on the 1 tab, and press the m

button.

Select a selection method.

● Press the op buttons or turn the Â

dial, select a selection method, and press

the m button.

● To stop erasing and return to the menu

screen, press the n button.

Designating Images Individually

Select [Select].

● Follow Step 2 above to select [Select] and

press the m button.

Select images.

● Press the qr buttons or turn the Â dial,

select the image and press the m button.

X Once set, will appear on the screen.

● Pressing the m button once more will

cancel selection, and will disappear.

● When selecting multiple images, repeat

the above operation.

/ Erasing All Images

114

Press the n button.

Erase.

● Press the qr buttons or turn the Â dial,

select [OK] and press the m button.

Select Range

Select [Select Range].

● Follow Step 2 on p. 113 to select [Select

Range] and press the m button.

Select the starting image.

● Press the m button.

● Press the qr buttons or turn the Â dial,

select the image and press the m button.

Select the ending image.

● Press the r button, select [Last image]

and press the m button.

● You cannot select images before the first

image.

● Press the qr buttons, or turn the Â dial

to select an image, and press the m

button.

/ Erasing All Images

115

Erase.

● Press the p button to select [Erase] then

press the m button.

Follow Steps 2 and 3 in the above screen, turn the Â dial, and you can select

the first and last images.

Select by Category

Select [Select by Date], [Select by

Category] or [Select by Folder].

● Follow Step 2 on p. 113 to select a

category, and press the m button.

Select a menu item.

● Press the op buttons or turn the Â

dial, select the items to set and press the

m button.

● If you press the qr buttons, you can

display the images within the items.

X Once set, will appear on the screen.

● Pressing the m button once more will

cancel selection, and will disappear.

Select images with the Â dial

/ Erasing All Images

116

Press the n button.

Erase.

● Press the qr buttons or turn the Â dial,

select [OK] and press the m button.

If there are no images that have been sorted into categories (p. 119), you will not

be able to select [Select by Category] in Step 2.

Select All Images

Select [All Images].

● Follow Step 2 on p. 113 to select [All

Images] and press the m button.

Erase.

● Press the qr buttons or turn the Â dial,

select [OK] and press the m button.

What if you cannot select [Select by Category]?

117

You can protect important images and movies so that they cannot be erased

by the camera (pp. 25, 113).

Select [Protect].

● Press the n button and select the 1

tab, then select [Protect] and press the m

button.

Select a selection method.

● Press the op buttons or turn the Â

dial, select a selection method, and press

the m button.

● To cancel, or return to the menu screen,

press the n button.

Designating Images Individually

Select [Order].

● Follow Step 2 above to select [Select],

and press the m button.

● Follow Step 2 on p. 113 to select an

image.

X Once set, will appear on the screen.

● Pressing the m button once more will

cancel selection, and will disappear.

● When selecting multiple images, repeat

the above operation.

: Protecting Images

If you format the memory card (p. 50), protected images will also be

erased.

Protected images cannot be erased with the camera’s erase function. To

erase an image, cancel protection first.

: Protecting Images

118

Select Range

Select [Select Range].

● Follow Step 2 on p. 117 to select [Select

Range], and press the m button.

● Follow Steps 2 and 3 on p. 114 to select

images.

Protect images.

● Press the p button, select [Protect] and

press the m button.

Select by Category

Select [Select by Date], [Select by

Category] or [Select by Folder].

● Follow Step 2 on p. 117 to select the type,

and press the m button.

● Follow Steps 2 and 3 on pp. 115 – 116 to

select images.

Protect images.

●

Press the

buttons or turn the

dial,

select [Protect] and press the

button.

Select All Images

Select [All Images].

● Follow Step 2 on p. 117 to select [All

Images] and press the m button.

Protect images.

●

Press the

buttons or turn the

dial,

select [Protect] and press the

button.

You can unlock groups of protected images if you select [Unlock] in Step

2, while in [Select Range], [Select by Category], or [All Images].

119

You can categorize images and movies. You can also use the categorized

images in the following functions.

• Jump Display (p. 105), Slide Show (p. 107), Erase All (p. 113), Protect

(p. 117), Print Settings (DPOF) (p. 132)

Select [My Category].

● Press the n button, and select [My

Category] on the 1 tab, and press the m

button.

Select a selection method.

● Press the op buttons or turn the Â

dial, select a selection method, and press

the m button.

● To cancel, or return to the menu screen,

press the n button.

Designating Images Individually

Select [Order].

● Follow Step 2 above to select [Select],

and press the m button.

● Follow Step 2 on p. 113 to select images.

● Press the op buttons, select a category

and press the m button.

X Once set, will appear on the screen.

● Pressing the m button once more will

cancel selection, and will disappear.

● When selecting multiple images, repeat

the above operation.

; Organizing Images by Category

(My Category)

Images taken with [Auto Category] set to [On] will be automatically

assigned to a particular category (p. 144).

; Organizing Images by Category (My Category)

120

Select Range

Select [Select Range].

● Follow Step 2 on p. 119 to select [Select

Range] and press the m button.

● Follow Steps 2 and 3 on p. 114 to select

images.

● Press the p button, select the item and

press the qr buttons, or turn the Â dial,

and select a type.

Make the setting.

● Press the p button to select [Select] then

press the m button.

You can change the orientation of an image and save it.

Select [Rotate].

● Press the n button and select the 1

tab, then select [Rotate] and press the m

button.

Rotate the image.

● Press the qr buttons or turn the Â dial

to select an image to rotate.

●

Cycle through the 90°/270°/original

orientations with each press of the

button.

● Pressing the n button will return you

to the menu screen.

If you select [Deselect] in Step 2, you can deselect all of the images in the

[Select Range] category.

\ Rotating Images

121

You can resize images that were taken at a high recording pixel setting to a

lower pixel setting, and save the resized image as a separate file.

Select [Resize].

● Press the n button and select the 1

tab, then select [Resize] and press the m

button.

Select an image.

● Press the qr buttons or turn the Â dial,

select the image and press the m button.

Select an image size.

● Press the qr buttons or turn the Â dial

to select an option, then press the m

button.

X The [Save new image?] screen will

appear.

Save the new image.

● Press the qr buttons or turn the Â dial

to select [OK], then press the m button.

X The image will be saved as a new file.

Display the new image.

● When you press the n button, the

[Display new image?] screen will appear.

If you press the qr buttons, or turn the

Â dial to select [Yes] and press the m

button, the saved image will display.

= Resizing Images

• You cannot resize an image to a larger size.

• You cannot resize images taken with and to a smaller size.

122

You can trim a required portion of a recorded image and save it as new image file.

Select [Trimming].

●

Press the

button, and select [Trimming]

on the

tab, and press the

button.

Select an image.

● Press the qr buttons or turn the Â dial,

select the image and press the m button.

Adjust the trimming area.

X A green frame will appear around the

portion of the image to be trimmed.

X The original image will display in the upper

left, and the image after trimming will

display in the lower right.

● If you move the zoom lever to the left or

right, you can change the size of the frame.

● If you press the opqr buttons, you can

move the frame.

● If you press the l button, you can

change the size of the frame.

● In an image with a detected face, a gray

frame will appear around faces located in

the upper left of the frame, and the frame

can be used for trimming. You can switch

between frames by turning the Â dial.

● Press the m button.

Save as a new image and display.

●

Perform the operations in Steps 4 and 5 on p. 121.

[ Trimming

Recorded pixels

after trimming

Trimming Area

Trimming Area Display

• , , and images cannot be trimmed.

• The width and height ratio of an image that can be changed is fixed at

4:3 (for a vertical image 3:4).

• The number of recorded pixels of an image that has been trimmed will

be smaller than the image before trimming.

123

You can change the color of an image and save it as a separate image.

Refer to p. 73 for details on each menu item.

Select [My Colors].

● Press the n button, and select [My

Colors] on the 1 tab, and press the m

button.

Select an image.

● Press the qr buttons or turn the Â dial,

select the image and press the m button.

Select a menu item.

● Press the qr buttons or turn the Â dial

to select an option, then press the m

button.

● After selecting the menu item, you can

enlarge or reduce the image by following

the operations in “k Magnifying Images”

(p. 111).

● If you press the m button during

magnified display, you can switch to the

original image before the color was

changed. Pressing the n button will

return you to the menu screen.

Save as a new image and display.

● Perform the operations in Steps 4 and 5

on p. 121.

? Adding Effects With the My Colors

Function

• If you repeatedly change the color of an image, the quality will gradually

deteriorate, and you may not get the image you want.

• The color of images taken with My Colors (p. 73) may differ from true

color.

124

Detects dark sections on subjects or in people’s faces in images, corrects

the brightness, and saves it as a separate file. You can select 4 levels of

correction: [Auto], [Low], [Medium], [High].

Select [i-Contrast].

● Press the n button, and select [i-

Contrast] on the 1 tab, and press the m

button.

Select an image.

● Press the qr buttons or turn the Â dial,

select the image and press the m button.

Select a menu item.

● Press the qr buttons or turn the Â dial

to select an option, then press the m

button.

Save as a new image and display.

● Perform the operations in Steps 4 and 5

on p. 121.

Select [Low], [Medium], or [High] and adjust the image.

@ Adjusting Dark Subjects (i-Contrast)

What if the image wasn’t corrected by [Auto] as you

planned?

• Depending on the image, it may become rough, or not be adjusted

correctly.

• Repeatedly adjusting the same image may cause the quality to

deteriorate.

125

You can automatically correct images with red-eye and save those images

as new files.

Select [Red-Eye Correction].

● Press the n button and select the 1

tab, then select [Red-Eye Correction] and

press the m button.

The [Red-Eye Correction] screen will appear.

Select an image.

● Press the qr buttons or turn the Â dial

to select an image to correct, then press

the m button.

X A frame will appear around the red-eye

portion detected by the camera, and

[Start] will appear.

● You can enlarge or shrink the image using

the operation in “k Magnifying Images”

(p. 111).

Correct the image.

● Press the opqr buttons or turn the Â

dial to select [Start], then press the m

button.

X The image will correct, and [New File] will

appear.

● You can enlarge or shrink the image using

the operation in “k Magnifying Images”

(p. 111).

Save as a new image and display.

● Press the opqr buttons, or turn the Â

dial to select [New File], and press the m

button.

X The image will be saved as a new file.

● Perform the operation in Step 5 on p. 121.

] Correcting Red-Eye Effect

126

Manual Correction

When the camera cannot automatically detect and correct red-eye, correct it manually.

Add a correction frame.

● In Step 3 on p. 125, select [Add Frame]

and then press the m button.

Set the position and size.

●

Press the

opqr

buttons to move the

correction frame (green) to the red-eye section,

move the zoom lever to adjust the frame size

so that it surrounds only the red-eye section.

X The area inside the frame will appear

enlarged in the lower right of the screen.

● If you press the m button, the first frame

(white) will be fixed, and a new correction

frame will appear.

● You can add up to 35 correction frames.

● When you have set the frame positions

and sizes, press the n button, then

follow Steps 3 and 4 on p. 125.

Removing Frames

• To remove a frame, in Step 3 on p. 125, select [Remove Frame] and then

press the m button.

• Press the qr buttons or turn the Â dial to select a frame (green), then

press the

button.

• When [Overwrite] in Step 4 on p. 125 is selected, the uncorrected image

is overwritten with the corrected data, erasing the original image.

• Some images may not be properly corrected.

•

Repeatedly correcting the same image may cause the quality to deteriorate.

• Protected images cannot be overwritten.

127

You can record and attach a sound memo (WAVE format) to an image. The

attached sound memo can be up to approximately 1 minute long.

Select [Sound Memo].

● Press the n button and select the 1

tab, then select [Sound Memo] and press

the m button.

Select an image.

● Press the qr buttons or turn the Â dial

to select an image, then press the m

button.

X The sound memo control panel will

appear on the screen.

Record the memo.

● Press the qr buttons or turn the Â dial

to select , then press the m button.

● You can pause/restart recording by

pressing the m button.

Sound Memo Operation Panel

Press the qr buttons, or turn the Â dial to select, then press the m

button.

• You can adjust the volume during playback with the op buttons.

• Select and press the m button, then press the n button to

return to the menu screen.

^ Attaching Sound Memos

Exit Starts recording

Pause (recording or playback) Play

Press the qr buttons or turn the Â dial to select [Erase], then press the m

button to erase the sound memo.

• The sound attached to an image can also be played with the supplied

software.

• Sound memos cannot be erased from protected images.

128

“Downloading Images with the Camera” (p. 35) in Chapter 1 explained how

to transfer images using [New Images]. This section will explain other ways

to transfer images. These designation methods comply with the DPOF

(Digital Print Order Format) standards.

Select a menu item.

● Select the menu item in the Step 1

operation in “Downloading Images with

the Camera” (p. 35).

Transfer the images.

● Press the c button.

X Images matching the selected option will

be transferred.

X The camera returns to the [Direct

Transfer] menu once transferring is

complete.

Direct Transfer Options

Transferring Images to a Computer

All Images Transfers all images from the memory card.

New Images (p. 35)

DPOF Trans. Images

Transfers all images designated for transfer at once

(p. 129).

Select & Transfer

Select and transfer images one at a time.

Press the qr buttons or turn the Â dial to select an

image, then press the c button to transfer the image.

Wallpaper

Select and transfer an image to use as your computer

desktop’s background (wallpaper).

Press the qr buttons or turn the Â dial to select an

image, then press the c button to transfer the image.

129

You can select individual images you want to transfer to a computer. These

designation methods comply with the DPOF (Digital Print Order Format)

standards.

Designating Images Individually

Select [Transfer Order].

● Press the n button and select the 1

tab, then select [Transfer Order] and

press the m button.

Select [Order].

● Press the qr buttons or turn the Â dial

to select [Order], then press the m

button.

Select an image.

● Press the qr buttons or turn the Â dial

to select an image.

● Press the m button to designate the

image. appears in the top left of the

screen.

● Press the m button again to cancel

designation. will disappear.

● When selecting multiple images, repeat

the step above (maximum of 998 images).

● Pressing the n button twice will save

the settings to the memory card and return

you to the menu screen.

{

Designating Images for Transfer (DPOF)

{ Designating Images for Transfer (DPOF)

130

Select All Images

● When you select [Mark all] in Step 2 on

p. 129, the screen shown left will appear.

● If you select [OK] and press the m

button, all images will be designated

together.

● If you press the n button, the

selected contents will be saved, and you

will return to the menu.

Canceling All Selections

On the screen in Step 2 on p. 129, if you select [Reset] and press the m

button, then press the qr buttons or turn the

dial to select [OK] and

press the m button, all marks will be cleared.

may display when using a memory card with transfer settings set by a

different DPOF-compliant camera. These settings will be overwritten by

those set by your camera.

131

Directly after shooting, or while in playback, by pressing the c button you

can add images to the print list (DPOF). You can print from a print list simply

by connecting your camera and printer. These designation methods comply

with the DPOF (Digital Print Order Format) standards.

Add Images to the Print List

Select an image.

● Press the qr buttons or turn the Â dial

and select the image.

Press the c button (videos will

be excluded).

Print list.

● Press the op buttons and select the

number of prints, press the qr buttons or

turn the Â dial, select [Add] and press

the m button.

● To cancel adding images, press the c

button again, press the qr buttons, or

turn the Â dial, select [Remove] and

press the m button.

Examples are given using Canon SELPHY ES series, and SELPHY CP

series printers. Please also refer to the Direct Print User Guide.

Connect the camera to the printer

(p. 26).

Print.

● Press the op buttons, select [Print now]

and press the m button.

X Printing will start.

● If you stop the printer during printing and

start again, it will start from the next print.

Print List (DPOF)

Number of copies to print

132

You can make print settings to images on a memory card (up to 998

images), such as which images to print and how many prints to make. You

can then print all the selected images at once or take the memory card to a

photo developer to order prints. Refer to the Direct Print User Guide for

details on how to print the selected images. These designation methods

comply with the DPOF (Digital Print Order Format) standards.

Print Settings

You can make settings for the print type, date and file number. These

settings apply to all images selected for printing.

Select [Print Settings].

● Press the n button and select the 2

tab, then select [Print Settings] and press

the m button.

Make the settings.

● Press the op buttons to select a menu

item, then press the qr buttons or turn

the Â dial to select an option.

X Pressing the n button will make the

settings and return you to the menu

screen.

Designating Images for Printing (DPOF)

Print Type

Standard Prints one image per page.

Index Prints several reduced size images per page.

Both Prints both standard and index formats.

Date

On Prints date from shooting information.

Off –

File No.

On Prints file number.

Off –

Clear DPOF data

After printing, all images selected for printing will be

removed.

Off –

Designating Images for Printing (DPOF)

133

Selecting the Number of Copies

Select [Select Images & Qty.].

● Press the n button and select the 2

tab, then select [Select Images & Qty.]

and press the m button.

Select an image.

● Press the qr buttons or turn the Â dial

to select an image to set, then press the

m button.

X You will be able to set the number of print

copies.

● If you select [Index], appears on the

screen.

● Press the m button again to cancel

designation. will disappear.

Set the number of prints.

● Press the op buttons or turn the Â dial

to set the number of prints (maximum 99).

● Repeat Steps 2 and 3 to set other images

and the number of prints.

• Depending on the printer or photo developer, print settings may not be

reflected.

• may display when using a memory card with print settings set by a

different DPOF-compliant camera. These settings will be overwritten by

those set by your camera.

• Some printers may print the date twice on these images if [Date] is also

set to [On].

• When set to [Index], [Date] and [File No.] cannot be set to [On] at the

same time.

• The date will be printed in the style set in [Date/Time] in 3 (p. 17).

Designating Images for Printing (DPOF)

134

● For [Index], you cannot set the number of

prints. Only select images with the

operation in Step 2.

X Pressing the n button will make the

settings and return you to the menu

screen.

Select Range

Select [Select Range].

● Select [Select Range] in Step 1 on p. 133,

and press the m button.

● Make selections by following the

operations in Steps 2 and 3 on p. 114.

Make print settings.

● Press the op buttons, select [Order] and

press the m button.

Select by Category

Select [Select by Date], [Select by

Category] or [Select by Folder].

● Follow Step 1 on p. 133 to select a type,

and press the m button.

● Follow Steps 2 and 3 on pp. 115 – 116 to

select images.

Make print settings.

● Press the qr buttons or turn the Â dial,

select [OK] and press the m button.

Designating Images for Printing (DPOF)

135

Set All Images to Print Once

Select [Select All Images].

● Select [Select All Images] from the screen

in Step 1 on p. 133 and press the m

button.

Make print settings.

● Press the qr buttons or turn the Â dial,

select [OK] and press the m button.

Canceling All Selections

After selecting [Clear All Selections] and pressing the m button in Step 1 on

p. 133, press the qr buttons or turn the Â dial to select [OK] and press the

m button to cancel all selections.

You can continuously record voice only, without images, up to a maximum

length of 2 hours.

You can select 3 levels of sound quality. They are, in order of highest to

lowest: [44.100kHz], [22.050kHz], [11.025kHz].

Select [Sound Recorder].

● Press the n button, and select

[Sound Recorder] from the 1 tab and

press the m button.

Sound-Only Recording (Sound Recorder)

_ Sound-Only Recording (Sound Recorder)

136

Changing the sound quality.

● Press the op buttons, and select the

sound quality.

Record.

● Press the qr buttons or turn the Â dial

to select , then press the m button.

X Recording will start, and the recording

time will appear.

●

If you press the

button, recording will stop.

Sound Memo Operation Panel

Press the qr buttons, or turn the Â dial to select the menu item and press

the m button.

Approximate Size for Sound Quality and Recording Time

Sampling Rate

Remaining Time

Exit

Starts recording.

Stops recording or playback.

Press the op buttons to select Voice Recorder, and if you press the

button, it

will play back.

If you continuously press the m button, it will rewind (audio will not play).

If you continuously press the m button, it will fast-forward (audio will not play).

If you press the qr buttons or turn the Â dial and select [Erase], then press the

m button, audio will erase. If you press the m button in [Erase All] and then

press the qr buttons or turn the

dial to select [OK] and press the m button,

all audio will be erased.

: Press the m button to protect audio.

Press the op buttons to adjust the playback volume.

Sound

quality

Size of voice

recording

32 MB (Supplied) 2GB 8GB

11.025 kHz 22 KB/sec. 23 min. 28 sec.

25 hrs. 22 min. 35 sec. 101 hrs. 23 min. 47 sec.

22.050 kHz 44 KB/sec. 11 min. 44 sec.

12 hrs. 41 min. 18 sec.

50 hrs. 41 min. 53 sec.

44.100 kHz 88 KB/sec. 5 min. 52 sec.

6 hrs. 20 min. 39 sec. 25 hrs. 20 min. 57 sec.

When the memory card becomes full, recording will automatically stop.

137

Customizing the Camera

You can customize various functions to suit your shooting

preferences. The first part of this chapter explains convenient

commonly used functions. The latter part explains how to change

shooting and playback settings to suit your goals.

138

You can customize convenient commonly used functions from the 3 tab

(p. 46).

Turning off the Power Saving Function

You can set the power saving function (p. 51) to [Off]. However, setting it to

[On] is recommended to save battery power.

● Select [Power Saving], then press the m

button.

● Press the op buttons to select [Auto Power

Down], then use the qr buttons or turn the

Â dial to select [Off].

● If you set the Power Saving function to [Off],

be careful not to forget to turn off the camera

after use.

Power Saving during Shooting

You can adjust the time before the monitor automatically turns off (p. 51).

● Select [Power Saving], then press the m

button.

● Press the op buttons to select [Display Off],

then use the qr buttons or turn the Â dial to

select a time.

● In order to save battery power, it is

recommended to select less than [1min.].

Changing Functions

139

Using the World Clock

When traveling abroad, you can record images with local dates and times simply

by switching the time zone setting if you pre-register the destination time zones.

You can enjoy the convenience of not having to switch the Date/Time settings.

Set the home time zone.

● Select [Time Zone] and press the m

button.

● When setting this for the first time, confirm

the information that displays on the screen

at the left, and press the m button.

● Press the qr buttons or turn the Â dial

to select the home time zone, then press

the m button. To set daylight saving time

(adds 1 hour), press the op buttons to

select .

Set the world time zone.

● Press the op buttons to select , then

press the m button.

● Press the qr buttons or turn the Â dial

to select the destination time zone, then

press the m button.

●

You can set daylight saving time just as in Step 1.

Select the world time zone.

● Press the op buttons and select [Home/

World].

●

Press the

buttons or turn the

dial to

select , then press the

button.

● will appear in the [Time Zone] or

shooting screen (p. 42).

In , if you change the date or time (p. 17), your home time and date will

automatically change.

Changing Functions

140

Changing the File Number Assignment

Images you shoot are automatically assigned file numbers, in the order they

were taken, from 0001 – 9999, and saved to folders of up to 2000 images.

You can change the file number assignment.

● Select [File Numbering], then press the qr

buttons to select an option.

● [Continuous]: Even if you shoot using a new

memory card, the file numbers are assigned

consecutively until an image with the number

9999 is taken/saved.

● [Auto Reset]: If you replace the memory card

with a new one, file numbering begins with

0001 again.

Creating a Folder

You can create new folders to save your images to.

● Select [Create Folder], then press the m

button.

● Select [Create New Folder], then press the

qr buttons or turn the Â dial to select .

● will display on the screen (p. 42) when

shooting, and shots will be recorded into a

new folder.

• For either setting [Continuous] or [Auto Reset], if you use a memory card

already containing images, the newly assigned file numbers may

continue the existing numbering. If you want to start over with file

number 0001, format the memory card before use (p. 50).

• Refer to the Software Starter Guide for information regarding folder

structure or image type.

Changing Functions

141

Creating Folders by Day and Time

You can set a day and time for folder creation.

● Select [Create Folder], then press the m

button.

● Select [Auto Create], then press the qr

buttons

or turn the

dial

to select an interval.

● Select [Time], then press the qr buttons

turn the

dial

to set a time.

● The new folder will be created on the set day

and time. Images shot after the creation date

are saved to the new folder.

Turning off Auto Rotate

When you play back images on the camera or a computer, images shot in

vertical orientation automatically rotate and display vertically. You can turn

off this function.

● Select [Auto Rotate], then press the qr

buttons to select [Off].

Changing the Lens Retract Time

For safety reasons, The lens retracts about 1 minute after pressing the

button

when in a shooting mode (p. 24). You can set the retract time to [0 sec.].

● Select [Lens Retract], then press the qr

buttons to select [0 sec.].

142

If you set the mode dial to 6 and then to G mode, you can change the

settings on the 4 tab (p. 46).

Using the Slow Synchro

You can use this to shoot people and main subjects at the appropriate

exposure, and the shutter speed is lowered so that both the subject and the

background appear at the proper brightness.

● Select [Flash Settings], then press the m

button.

● Press the op buttons or turn the Â dial to

select [Slow Synchro], then press the qr

buttons to select [On].

Turning off the Red-Eye Reduction Function

The red-eye reduction lamp lights in order to reduce the red-eye effect that

occurs when shooting in dark conditions using the flash. You can turn off this

function.

● Select [Flash Settings], then press the m

button.

● Press the op buttons or turn the Â dial to

select [Red-Eye Lamp], then press the qr

buttons to select [Off].

Before attempting to shoot using a function explained in this chapter in

modes other than G mode, check if the function is available in those

modes (pp. 158 – 159).

Changing Shooting Functions

• Attach a tripod to the camera, as the shutter speed is slow. You are

recommended to shoot with the [IS Mode] set to [Off] (p. 145).

• Even if the flash fires, ensure that the subject does not move until the

shutter sound ends.

Changing Shooting Functions

143

Turning off the AF Assist Beam

When the camera cannot focus when you press the shutter button halfway,

the lamp will automatically light to assist focusing. You can turn off the lamp.

● Select [AF-assist Beam], then press the qr

buttons to select [Off].

Displaying Image Information Right After

Shooting

You can change the image display that appears after shooting.

● Select [Review Info], then press the qr

buttons to select an option.

● [Detailed]: Displays detailed information

(p. 43).

● [Focus Check]: The area inside the AF frame

displays enlarged, allowing you to check the

focus. The procedure is the same as in

“Checking the Focus or People’s Expressions

(Focus Check)” (p. 110).

Changing Shooting Functions

144

Categorizing Images Automatically

Images can be automatically categorized (p. 119) when shooting.

● Select [Auto Category], then press the qr

buttons to select [On].

● : For images shot in I, F or V mode, or

images with faces detected when [AF Frame]

is set to [Face Detect].

● : For images shot in U or O mode.

● : For images shot in H, P, w, t, y or S

mode.

Displaying the Overlay

You can display gridlines for vertical and horizontal guidance, or 3:2 guide to

confirm the printable area for L size or postcard size prints.

● Select [Disp. Overlay], then press the qr

buttons to select an option.

● [Grid Lines]: A grid overlays the display.

● [3:2 Guide]: The areas outside the 3:2 range

are grayed out. This area will not print when

printing on paper with a 3:2 aspect ratio.

Movies cannot be automatically categorized, but can be categorized

using My Category (p. 119).

• In mode, you cannot set [3:2 Guide] or [Both].

• Grid Lines will not be recorded on the image.

• The gray areas displayed with [3:2 Guide] are the areas that will not be

printed. The actual image recorded will include the portion in the gray

areas.

Changing Shooting Functions

145

Changing the IS-Mode Settings

● Select [IS Mode], then press the qr buttons to

select an option.

● [Continuous]: The image stabilization is

always on. You can confirm the result directly

on the display, which makes it easier to check

the composition or focus of the subject.

● [Shoot Only]: The image stabilization is only

on in the moment of shooting.

● [Panning]: The image stabilization only works

for the effect of up and down motion. This

option is recommended for shooting objects

moving horizontally.

Registering Functions to the c Button

● Select [Set c button], then press the m

button.

● Press the opqr buttons or turn the Â dial

to select the functions to register, then press

the m button.

● Pressing the c button will call up the

registered function.

•

If camera shake is too strong, fix the camera to a tripod. However, it is

recommended to set IS Mode to [Off] when the camera is fixed to a tripod.

• When using [Panning], hold the camera horizontally. Image stabilization

does not work when the camera is held vertically.

• Press if you want to cancel a function.

• When this symbol is shown on the bottom right of an icon, the

function cannot be used in the current shooting mode or function setting.

• In , each press of the c button records white balance data (p. 71),

and the white balance settings also change to .

• In , each time you press the c button, the shutter sound’s clip

(p. 147) in the 5 tab will play. Use this when you want to draw the

attention of the subject before shooting.

146

You can make settings in the 1 tab by pressing the 1 button (p. 46).

Registering Functions to the 1 Button

● Select [Set Play button] and press the m

button.

● Press the qr buttons or turn the Â dial to

select an option, then press the m button.

● Pressing the 1 button in Playback mode will

call up the registered function.

Selecting the Image that Resumes in Playback

● Select [Resume], then press the qr buttons

to select an option.

● [Last shot]: Resumes with the most recently

shot image.

● [Last seen]: Resumes with image last viewed.

Changing Playback Functions

• Selecting 1 (Standard) will let you switch between turning the camera

off and Playback mode, or between Shooting and Playback modes

(p. 24).

• If you select . or _, you cannot turn the camera off with the 1 button.

• Slideshows cannot be started during index playback.

147

You can set images you have taken as the start-up image that displays when

the camera is turned on, or record sounds for each of the cameras

operations with the 5 menu.

Change

● Press the op buttons or turn the Â dial to

select an option.

● Press the qr buttons to select a setting.

● Press the n button to complete the

setting.

● Select [Theme] to set all the items to the same

number setting.

When you press the 1 button and set the camera to playback mode, you

can register sounds and images.

● Press the qr buttons to select or ,

then press the l button.

● Start-up Image: Press the qr buttons or turn

the Â dial to select an image, then press the

m button.

● Press the qr buttons or turn the Â dial to

select [OK], then press the m button to

complete registration.

5 Changing the Start-up Image or

Sound (My Camera Settings)

5 Changing the Start-up Image or Sound (My Camera Settings)

148

● Sounds: Press the qr buttons or turn the Â

dial to select , then press the m button to

record.

● After recording, press the qr buttons or turn

the Â dial to select , then press the m

button.

● Press the qr buttons or turn the Â dial to

select [OK], then press the m button to

complete registration.

You can register images or sounds to the camera using the included software

(ZoomBrowser/ImageBrowser). Refer to the Software Starter Guide for details.

Any previously registered image or sound will be overwritten when

registering a new image and sound (p. 147).

Use the supplied software (ZoomBrowser EX/ImageBrowser) to restore

the default My Camera settings to the camera. Refer to the Software

Starter Guide for details.

149

Useful Information for Using

the Camera

This chapter introduces camera accessories and contains lists of

functions. The index also appears at the end.

150

If you use AC Adapter Kit ACK-DC30 (sold separately), you can use the

camera without worrying about how much charge is left in the battery.

Insert the coupler.

● Open the cover (p. 14) and insert the

coupler as shown until it locks into place

with a click.

● Close the cover (p. 14).

Plug the cord into the camera.

● Open the cover and fully insert the plug

into the coupler.

Connect the power cord.

● Connect the power cord to the compact

power adapter, then plug the other end

into a power outlet.

● You can turn the camera on to use it.

●

After you finish, turn off the camera and

unplug the power cord from the power outlet.

High-Power Flash HF-DC1 (sold separately) is used to supplement the

camera’s built-in flash when the subject is too far away for proper

illumination. For details on attaching and using the High-Power Flash, refer

to the user guide provided with the flash.

When in D mode (p. 89)

Using Household Power

Do not unplug the power cord with the camera turned on. This could

erase images you have taken or damage the camera.

When can you not use the HF-DC1?

Using a Supplementary Flash

151

If you think there is a problem with the camera, first check the following. If

the items below do not solve your problem, contact a Canon Customer

Support Help Desk as listed in your Warranty System Booklet.

Power

You pressed the power button, but nothing happened.

• Confirm that the battery/batteries is properly inserted (p. 14).

• Confirm that the memory card/battery cover is securely closed (p. 14).

• If the battery terminals are dirty, battery performance will decrease. Clean the

terminals with a cotton swab and re-insert the battery/batteries several times.

Battery/batteries is consumed quickly.

• Battery performance decreases at low temperatures. Warm the battery/

batteries, such as by placing them in your pocket with the terminal cover on.

Lens will not retract.

• Do not open the memory card/battery cover while the power is on. After closing

the memory card/battery cover, turn the power on then back off (p. 15).

TV output

Image is distorted or not showing on TV (p. 112).

Shooting

Cannot shoot.

• Set the mode dial to A (p. 40).

• When in playback (p. 24), press the shutter button halfway (p. 20).

Screen doesn’t display.

• Press the l button (p. 42).

Camera screen is black at start-up.

• Images that have been edited on a computer, have had their name changed, or

have been taken with another camera may not display correctly when set in the

My Camera function (p. 147).

Screen does not display properly in dark places (p. 44).

Screen does not display properly while shooting.

Please note, the following issues will not be recorded in still images, but will be

recorded in movies.

• When the camera is subjected to powerful light sources, the display may

darken.

• Under fluorescent lighting, the screen may flicker.

• When shooting bright light sources, a bar of light (purplish red) may appear on

the screen.

h appears on the screen and the shot cannot be taken even

though the shutter button was pressed fully (p. 23).

You Think There is a Problem

152

appears when the shutter button was pressed halfway (p. 57).

• Set the [IS mode] to [On] (p. 145).

• Set the flash to h (p. 67).

• Increase the ISO speed (p. 70).

Image is blurred.

• Shoot the subject within the focusing distance (p. 163).

• Set the [AF-assist beam] to [On] (p. 143).

• Confirm that functions which you do not intend to use (macro, etc.) are not set.

• Shoot using the focus lock, AF lock or manual focus (pp. 78, 84, 85).

Even when you press the shutter button halfway, the frame does

not appear, and the camera does not focus.

• If you center on the light and dark contrasting area of the subject and push the

shutter button halfway, or repeatedly push the shutter button halfway, the frame

will appear and the camera will focus.

Subject is too dark.

• Set the flash to h (p. 67).

• Adjust the brightness with exposure compensation (p. 72).

• Use the AE lock, or spot metering to shoot (p. 87).

Subject is too bright (overexposed).

• Set the flash to ! (p. 57).

• Adjust the brightness with exposure compensation (p. 72).

• Use the AE lock, or spot metering to shoot (p. 87).

• The subject is too bright due to ambient lighting.

Image is dark even though the flash fired (p. 23).

• Increase the ISO speed (p. 70).

Image taken using the flash is too bright (overexposed).

• Shoot within an appropriate distance for flash photography (p. 67).

• Set the flash to ! (p. 57).

White dots appear on the image when shooting with the flash.

• Light from the flash has reflected off dust particles or other objects in the air.

Image appears rough or grainy.

• Shoot with the ISO speed on a lower setting (p. 70).

• Depending on the shooting mode, when shooting in a high ISO speed the image

may appear rough or grainy (pp. 55, 56).

Eyes appear red (p. 92).

• Set the [Red-Eye Lamp] to [On] (p. 142). When shooting with the flash, the lamp

(on the front of the camera) lights (p. 40), and for approximately 1 second while

the camera is reducing red-eye, it is not possible to shoot. It is more effective if

the subject is looking directly at the lamp. Even better results can be obtained by

increasing the lighting in indoor settings or approaching closer to the subject.

You Think There is a Problem

153

Recording images to the memory card takes a long time, or

continuous shooting slows down.

• Format the memory card in the camera (p. 50).

When you can’t make settings for shooting functions or FUNC.

• The items in which settings can be made differ depending on the shooting

mode. Check the Menu lists (pp. 156 – 159).

Shooting movies

Correct shooting time does not display, or stops.

• Format the memory card in the camera, or use a memory card capable of

recording at high speeds. Even when the shooting time does not display

properly, the video recorded will be the length that it was actually shot (p. 29).

“!” displayed on the LCD monitor, and shooting ended

automatically.

Camera’s internal memory was insufficient. Try one of the following.

• Format the memory card in the camera (p. 50).

• Lower the recorded pixels (p. 99).

• Use a memory card capable of recording at high speeds.

Playback

Cannot play back images or movies.

• If the file name or folder structure is changed on a computer, you may not be

able to play back images or movies. Refer to the Software Starter Guide for

information regarding folder structure or file names.

Playback stops, or audio cuts out.

• Use a card that has been formatted on this camera (p. 50).

• If you copy a movie to a memory card that reads slowly, playback may interrupt

momentarily.

154

If error messages appear on the LCD monitor, try one of the following

solutions.

No memory card

• The memory card is not installed in the correct direction. Install the memory card

in the correct direction (p. 14).

Card locked!

• The SD memory card or SDHC memory card’s write protect tab is set to “Lock”.

Unlock the write protect tab (p. 16).

Cannot record!

• You attempted to shoot an image without the a memory card, or with a memory

card installed incorrectly. Install the memory card in the correct direction when

shooting (p. 14).

• You cannot attach sound memos to movies (p. 127).

Memory card error (p. 51)

• If this error message appears even when using the supplied memory card,

contact your Canon Customer Support Help Desk as there may be a problem

with the camera.

Memory card full

• There is not enough free space on the memory card to shoot (pp. 21, 53, 65, 81)

or edit images (pp. 120 – 127). Erase the images (pp. 25, 113) to open space for

new images, or insert an empty memory card (p. 14).

Change the battery (p. 14)

No image

• There are no images recorded on the memory that can be displayed.

Protected! (p. 117)

Unidentified Image/Incompatible JPEG/Image too large./RAW

• Unsupported images or data, or corrupted image data cannot be displayed.

• Images manipulated on a computer, that have had their file name changed, or

have been taken with a different camera may not display.

Cannot magnify!/Cannot rotate/Cannot modify image/Cannot register

this image!/Cannot assign to category/Unselectable image.

• Incompatible images cannot be magnified (p. 111), rotated (p. 120), edited

(pp. 120 – 127), registered to the start-up screen (p. 147), categorized (p. 119),

or added to a print list (p. 132).

• Images manipulated on a computer, that have had their file name changed, or

have been taken with a different camera may not be magnified, rotated, edited,

registered to the start-up screen, categorized, or added to a print list.

• Movies cannot be magnified (p. 111), edited (pp. 120 – 127), or registered to the

start-up screen (p. 147).

List of Messages That Appear on the Screen

155

Cannot select!

• When selecting the selection range (pp. 114, 118, 120), you tried to select a

starting image that was after the last image or you tried to select an ending

image that was before the starting image.

• You tried to select more than 501 images (pp. 114, 118, 120).

Cannot transfer!

• You cannot send incompatible images by direct transfer or images with

corrupted data even if they are selected.

• You cannot send a movie as a background image on your PC even if it is

selected (p. 128).

Too many marks

• You selected more than 998 images to send in print settings. Select less than

998 images (p. 132).

Cannot complete!

• Print settings or transfer settings could not be saved correctly. Reduce the

number of settings and try again (pp. 129, 132).

Naming error!

• The file name could not be created because there is an image with the same

name as the folder that the camera is attempting to create, or the highest

possible file number has already been reached (p. 140). In the 3 menu, change

[File Numbering] to [Auto reset] (p. 140) or format the memory card (p. 50).

Incompatible WAVE

• Since the data type of the existing sound memo is incorrect, no new sound

memo can be added or played back (p. 127).

Communication error

• Images could not be transferred to the computer due to the large amount of

images (approx. 1000) stored on the memory card (p. 31). Use a commercially

available USB card reader to download the images.

Lens error, restart camera

• A lens error was detected. Press the power button to turn the camera off and

back on (p. 40). If this error message continues to display, contact your Canon

Customer Support Help Desk as there may be a problem with the lens.

• This error can occur if you hold the lens while it is in motion or when using it in a

location with excessive dust or sand in the air.

Exx (xx: number)

• A camera error was detected. Press the power button to turn the camera off and

back on (p. 40).

• If an error code displays directly after taking a picture, the shot may not have

been recorded. Check image in playback mode.

• If this error code reappears, note the number and contact your Canon Customer

Support Help Desk as there may be a problem with the camera.

156

Functions Available in Each Shooting Mode

Shooting modes

Function

GD IF

Flash (pp. 57, 67)

{{— {{{

— {{{{{

{ {{{{{

Focusing Zone (pp. 63, 67, 85)

{ {{{{{

{{{— {{

— {{— {{

ISO Speed (p. 70)

{{— {{{

{{— { ——

— {{{——

Drive Mode (pp. 61, 62, 72, 74,

75)

{ {{{{{

— {{{{{

{{{— {{

{ {{{{{

AF Lock (p. 84)

— {{{——

AE Lock (p. 87)/FE Lock (p. 88)

— { — { ——

TV Display (p. 76)

{{{— {{

Face Selection (p. 86)

{{{— {{

Information Display (p. 42)

{{{

{{

Off

{{{ {{

No Display

{{{ {{

Function menu

Exposure Compensation (p. 72)/Exposure Shift (p. 99)

— { — {{{

White Balance (p. 71)

{ {{{{{

— {{{——

My Colors (p. 73)

— {{{——

Flash Exposure Compensation (p. 88)

— { — { ——

Flash Output (p. 90) / Tv/Av Settings (p. 89)

——{ ———

Metering System (p. 87)

{ {{{{{

— {{———

Image Quality (Compression Ratio) (p. 68)

{ {{{{{

Recording Pixels (pp. 68, 98)

{ {{{{{

— —————

*1 ISO3200 (p. 56) is set by default. *2 Only AE lock available. *3 Quick Shot screen displayed.

ÒÎ

Functions Available in Each Shooting Mode

157

VHUOPwtyS Z RT Yv xX> z

{{{{{{——{ ——{ ———

{{{{{{— {{ ——{{——

{{{{{{{{{ {{{{——

{{{{{{{{{ { — {{{{

— { — {{{— {{{{{{{{

— { — {{{— {{ { — {{{{

{{{{{{— {{ { — { — {{

{{{{{{{{{

{{{{{

————————— { ————

{{{{{{{{{ {{{{——

{{{{{{{{{ { { ————

{{{{{{— {{ { { ————

{{{{{{{{{ {{{{{{

{{{{{{{{{ { { ————

————————— — { ——{ —

————————— — { ——*2—

{{{{{{{{{ { { { — {{

{{{{{{— {{{{{———

{{{{{{{{{ {{{{{{

{{{{{{{{{ { { ——{ —

{{{{{{{{{ { —————

Function menu

{{{{{{{{{ — { — {{—

{{{{{{{{{ {{{{{{

————————— — { — {{—

————————— ——————

{{{{{{{{{ {{{{{{

————————— — { ————

{{{{{{{{{ {{{{——

{{{{{{{{{ *4 *5 { *5 — —

————————— ————{{

*4 is set by default. *5 is not available. { Selectable — Not selectable

158

4 Shooting Menu

Menus

Shooting modes

Function

GD IF

AF Frame (p. 82)

Face Detect

{ {{{{{

AiAF

{{{— {{

Center

{{{— {{

AF Frame Size (p. 82)

Normal/Small

— {{———

AF-Point Zoom (p. 83)

On/Off

{{{— {{

Servo AF (p. 84) On/Off

{{{— {{

Digital Zoom (p. 58)

Standard/Off

{{{— {{

Digital Tele-converter (1.7x/2.2x)

{{{— {{

Flash Settings

(pp. 92, 142)

Slow Synchro On/Off

— { *1 { —*1

Red-Eye Corr. On/Off

{ {{{{{

Red-Eye Lamp On/Off

{ {{{{{

Flash Exposure Compensation

— { — { ——

Flash Output

Maximum/Medium/Minimum

——{ ———

i-Contrast (p. 91) Off/Auto

{ {{{——

Drive Settings

(pp. 62, 74, 75)

Face Self-Timer

1 – 10 shots

{{{— {{

Self-Timer

10 sec./2 sec.

{ {{{{{

Custom

{ {{{{{

MF Magnified Display

(p. 85) On/Off

— {{— {{

AF-assist Beam (p. 143)

On/Off

{ {{{{{

Review (p. 52) Off/2 – 10 sec./Hold

{ {{{{{

Review Info (p. 143) Off/Detailed/Focus Check

{ {{{{{

Save Original (p. 95) On/Off

— —————

Auto Category (p. 144)

On/Off

{ {{{{{

Disp. Overlay (p. 144)

Off/Grid Lines

{{{— {{

3:2 Guide/Both

{{{— {{

Histogram On/Off

— {{*1 — —

IS Mode (p. 145)

Continuous/Off

{ {{{{{

Shoot Only/Panning

{ {{{{{

Date Stamp (p. 60) Off/Date/Date & Time

{ {{{{{

Set

c button (p. 145)

{ {{{{{

*1 Always [On].

*2 Available when h is selected.

*3 Possible settings: 0 – 30 seconds in [Delay], and 1 – 10 shots in [Shots].

Menus

159

VHUOPwt y SZ RT Yv xX> z

{{ { {{{— {{{{ { ———

{{ { {{{— {{{{ { — {{

{{{{{{{{{{{ { {——

—— — ———— — —— — — — — —

{{{{{{{{{{— { ———

{{ { {{{— {{{{{{*1 *1

{{{{{{{{{—*1 ——{ —

{{{{{{{{{——————

—— *1 ———— — —— — — { ——

{{ { {{{— {{——————

{{ { {{{— {{—— {{——

—— — ———— — —— — — — — —

{{ { {{{— {{{{ ————

{{{{{{{{{{{ { {{{

{{{{{{{{{{{ ————

{{ { {{{— {{{— { ———

{{ { {{{—*2{{{{{{{

{{{{{{{{{{{ { {——

{{{{{{{{{{{ { ———

—— — ———— — —— — { ———

{{{{{{{{{{{ { {{{

{{{{{{{{{{{ { — {{

{{{{{{{{{{{ { ———

—— — ———— — —— — — — — —

{{{{{{{{{{{ { {{{

{{{{{{{{{{{ { {——

{{{{{{{{{— {{———

{{{{{{{{{{{ { {{{

{ Selectable — Not selectable

Menus

160

3 Setting Menu

There is usually no need to change the setting, but select when you print an

image recorded in the (Widescreen) mode at the full page setting for wide

paper using a Canon SELPHY CP750/CP740/CP730/CP720/CP710/CP510/

CP520/CP530 Compact Photo Printer. Since this setting is saved even when the

power is turned off, ensure that you return the setting to [Auto] to print other

image sizes. (However, it cannot be changed while the printer is connected.)

1 Playback Menu

Item Options/Summary Ref. Page

Mute On/Off* p. 47

Volume Set all operation sounds (5 levels). p. 47

LCD Brightness Set within a range of ±7. p. 48

Power Saving Auto Power Down: On*/Off

Display Off: 10 – 30 sec./1* – 3 min.

p. 138

Time Zone Home/World p. 139

Date/Time Date and time settings p. 17

Clock Display 0 – 5* – 10 – 30 sec./1 – 3 min. p. 52

Format Formats card, erasing all data p. 50

File Numbering Continuous*/Auto Reset p. 140

Create Folder Create New Folder/Auto Create

pp. 140, 141

Auto Rotate On*/Off p. 141

Distance Units m/cm*/ft/in p. 85

Lens Retract 1 min.*/0 sec. p. 141

Language Select displayed language. p. 19

Video System NTSC/PAL p. 112

Print Method Auto*/ —

Reset All Returns camera to default settings. p. 49

* Default setting

About Print Method setting

Item Options/Summary Ref. Page

Slide Show Automatic playback of still images and movies. p. 107

My Category Categorizes images. p. 119

Erase Erases images. p. 113

Protect Protects images. p. 117

Menus

161

2 Print Menu

5 My Camera Menu

i-Contrast Corrects dark portions of images. p. 124

Red-Eye Correction Corrects red-eye portion of images. p. 125

Trimming Trims portions of images. p. 122

Resize Resizes and saves images. p. 121

My Colors Adjusts colors in images. p. 123

Sound Memo Records and attaches sound to images. p. 127

Sound Recorder Records audio. p. 135

Rotate Rotates images. p. 120

Transfer Order Sets images for download to a computer. p. 129

Set Play button Registers functions to the 1 button. p. 146

Resume Last seen*/Last shot p. 146

Transition / */ p. 111

* Default setting

Item Options/Summary Ref. Page

Print Displays printing screen. p. 26

Select Images & Qty. Selects individual images for printing. p. 133

Select Range Selects starting and ending images for printing.

p. 134

Select by Date Selects images for printing by date.

Select by Category Selects images for printing by category.

Select by Folder Selects images for printing by folder.

Select All Images Selects all images for printing. p. 135

Clear All Selections Cancels all settings for printing. p. 135

Print Settings Sets the printing style. p. 132

Item Options/Summary Ref. Page

Theme Common themes settings.

p. 147

Start-up Image Selecting the start-up screen when the power is

turned on.

Start-up Sound Selecting the start-up sound when the power is

turned on.

Operation Sounds Selecting operation sounds (excluding the

shutter button).

Self-timer Sound Selecting the self-timer sound.

Shutter Sound Selecting the shutter sound.

162

Equipment

• This camera is a high-precision electronic device. Do not drop it or subject

it to strong impact.

• Never place the camera close to magnets or motors that generate strong

electromagnetic fields. Exposure to strong magnetic fields may cause

malfunctions or corrupt image data.

• If water droplets have fallen or dirt is stuck on the camera or LCD monitor,

wipe with a dry soft cloth or eyeglass wiper. Do not rub or apply force.

• Never use cleaners including organic solvents to wipe the camera or LCD

monitor.

• Use a commercially available blower brush to remove dust from the lens.

For stubborn dirt contact the closest Canon Customer Support Help Desk

as listed in your Warranty System Booklet.

• When you move the camera rapidly from cold to hot temperatures,

condensation may form on the internal or external surfaces of the camera.

To avoid condensation, put the camera in an airtight, resalable plastic bag

and let it adjust to temperature changes slowly before removing it from the

bag.

• When condensation has formed, stop using the camera immediately.

Continued use may damage the camera. Remove the battery/batteries

and memory card, and wait until the moisture has completely evaporated

before resuming use.

Memory Cards

• A memory card is a high-precision electronic device. Do not bend, apply

force or subject to strong impact. Doing so may corrupt image data

recorded on the memory card.

• Do not spill liquids on the memory card. Do not touch the memory card’s

terminals with your hands or metallic objects.

• Do not store memory cards near a TV, speakers or other devices that

generate magnetism or static electricity. Doing so may corrupt image data

recorded on the memory card.

• Do not store memory cards in hot, humid or dusty locations.

Handling Precautions

163

Camera Effective Pixels. . . . . . . . . . . Approx. 14.7 million

Image Sensor . . . . . . . . . . . . . . . . . . 1/1.7-inch type CCD (Total number of pixels:

Approx. 15 million)

Lens . . . . . . . . . . . . . . . . . . . . . . . . . . 7.7 (W) – 28.5 (T) mm

35mm film equivalent: 36 (W) – 133 (T) mm

f/2.8 (W) – f/5.8 (T)

Digital Zoom. . . . . . . . . . . . . . . . . . . . Approx. 4.0x (Up to approx. 15x in combination

with the optical zoom)

Optical Viewfinder . . . . . . . . . . . . . . . Real-image zoom viewfinder

LCD Monitor. . . . . . . . . . . . . . . . . . . . 2.5-inch type TFT LCD color monitor

Approx. 230,000 dots, Viewfinder coverage 100%

AF Frame Mode. . . . . . . . . . . . . . . . . Face Detect/AiAF (9 points)/Center

Servo AF . . . . . . . . . . . . . . . . . . . . . . On/Off

Focusing Range (from end of lens) . . Normal: 50 cm (1.6 ft.) – infinity

Macro: 5 – 50 cm (2.0 in. – 1.6 ft.) (W)/

40 – 50 cm (1.3 – 1.6 ft.) (T)

Infinity: 3 m (9.8 ft.) – infinity

Digital Macro: 5 – 50 cm (2.0 in. – 1.6 ft.)

Kids&Pets: 1 m (3.3 ft.) – infinity

Manual focus shooting: 5 cm – infinity (2.0 in. –

infinity) (W)/40 cm – infinity (1.3 ft. – infinity) (T)

Shutter . . . . . . . . . . . . . . . . . . . . . . . . Mechanical shutter and electronic shutter

Shutter Speed . . . . . . . . . . . . . . . . . . 1/60 – 1/1600 sec.

15 – 1/1600 sec. (Total shutter speed range)

Image Stabilization . . . . . . . . . . . . . . Lens-shift type

Metering Type . . . . . . . . . . . . . . . . . . Evaluative, Center-weighted average or Spot

Exposure Compensation . . . . . . . . . . ±2 stops in 1/3-stop increments

ISO speed (Standard Output Sensitivity, Recommended Exposure Index)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Auto, High ISO Auto, ISO 80/100/200/400/800/1600

White Balance . . . . . . . . . . . . . . . . . . Auto, Day Light, Cloudy, Tungsten, Fluorescent,

Fluorescent H, Custom

Built-in Flash . . . . . . . . . . . . . . . . . . . Auto, On, Off

* Red-eye reduction/Red-eye correction/

Slow Synchro settings available/Flash Exposure

compensation (1/3 steps)/Flash output (3

levels)/FE Lock available

Built-in Flash Range . . . . . . . . . . . . . 50 cm – 4.6 m (1.6 – 15 ft.) (W)/

50 cm – 2.4 m (1.6 – 7.9 ft.) (T)

Shooting Modes . . . . . . . . . . . . . . . . .Auto Mode: Auto

P/M Mode: Program AE/Manual

Quick shot mode

Special scene mode: Portrait, Night Snapshot,

Kids&Pets, Indoor, Sunset, Foliage, Snow, Beach,

Fireworks, Aquarium, Underwater, ISO3200, Digital

Macro, Color Accent, Color Swap, Stitch Assist

Specifications

164

Movie Mode: Standard, Color Accent, Color Swap

Continuous Shooting . . . . . . . . . . . . .Approx. 1.3 images/sec.

Self-timer . . . . . . . . . . . . . . . . . . . . . .Face Self-Timer, Approx. 10-sec./Approx. 2-sec.

delay, Custom Timer

i-Contrast . . . . . . . . . . . . . . . . . . . . . .Auto/Off

Recording Media . . . . . . . . . . . . . . . .SD memory card, SDHC memory card,

MultiMediaCard, MMCplus memory card,

HC MMCplus memory card

File Format. . . . . . . . . . . . . . . . . . . . .Design rule for camera file system and DPOF

compliant

Data Type . . . . . . . . . . . . . . . . . . . . .Still images: Exif 2.2 (JPEG)

Movies: MOV (Image data: H.264, Audio data:

Linear PCM) (Mono)

Voice Memo, Sound Recorder: WAVE (Mono)

Compression . . . . . . . . . . . . . . . . . . .Superfine, Fine, Normal

Number of Recording Pixels

(Still images) . . . . . . . . . . . . . . . . . . .Large: 4416 x 3312 pixels

Medium 1: 3456 x 2592 pixels

Medium 2: 2592 x 1944 pixels

Medium 3: 1600 x 1200 pixels

Small: 640 x 480 pixels

Widescreen: 4416 x 2480 pixels

(Movies) . . . . . . . . . . . . . . . . . . . . . . .640 x 480 pixels (30 frames/sec.)

320 x 240 pixels (30 frames/sec.)

Number of Possible shots . . . . . . . . .LCD monitor on: approx. 280 images (CIPA

Standard compliant).

LCD monitor off: approx. 700 images.

Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . Quantization: 16 bit

Sampling Rate

Voice Memo: 11.025 kHz

Movies: 44.100 kHz

Sound Recorder: 11.025 kHz/22.050 kHz/44.100 kHz

Playback Function . . . . . . . . . . . . . . .Single Image Playback, Video Playback,

Magnified Focus, Index Playback, Magnified

Playback, Jump, Slide Show

Editing Function . . . . . . . . . . . . . . . . .Erase, Protect, My Category, Resize, My Colors,

i-Contrast, Trimming, Rotate, Red-Eye Correction,

Voice Memo, Sound Recorder

Direct Print Type . . . . . . . . . . . . . . . .PictBridge, Canon Direct Print, Bubble Jet Direct

capable

Interface . . . . . . . . . . . . . . . . . . . . . . .Hi-Speed USB (Dedicated connector (female) with

unified type of digital, audio and video*)

* mini-B compatible

Video/Audio output (NTSC and PAL capable,

mono audio)

Specifications

165

Communication Settings . . . . . . . . . . MTP, PTP

Power. . . . . . . . . . . . . . . . . . . . . . . . . Battery Pack NB-5L (rechargeable lithium-ion

battery)

AC adapter kit ACK-DC30

Operating Temperatures . . . . . . . . . . 0 – 40° C (32 – 104° F)

Operating Humidity . . . . . . . . . . . . . . 10 – 90%

Dimensions (excluding protrusions). . 96.7 x 62.2 x 27.9 mm (3.81 x 2.45 x 1.10 in.)

Weight (camera body only) . . . . . . . . Approx. 160 g (5.64 oz.)

Battery Pack NB-5L

Type. . . . . . . . . . . . . . . . . . . . . . . . . . Rechargeable lithium-ion battery

Voltage. . . . . . . . . . . . . . . . . . . . . . . . 3.7 V DC

Capacity. . . . . . . . . . . . . . . . . . . . . . . 1120 mAh

Charging cycles . . . . . . . . . . . . . . . . . Approx. 300 times

Operating temperature. . . . . . . . . . . . 0 – 40° C (32 – 104° F)

Dimensions . . . . . . . . . . . . . . . . . . . . 32.0 x 44.9 x 7.9 mm (1.26 x 1.77 x 0.31 in.)

Weight . . . . . . . . . . . . . . . . . . . . . . . . Approx. 25 g (0.88 oz.)

Battery Charger CB-2LX/CB-2LXE

Rated input . . . . . . . . . . . . . . . . . . . . 100 – 240 V AC (50/60 Hz), 0.085 A (100 V) –

0.05 A (240 V)

Rated output . . . . . . . . . . . . . . . . . . . 4.2 V DC, 0.7 A

Charge time . . . . . . . . . . . . . . . . . . . . Approx. 2 hours 5 min.

Operating temperature. . . . . . . . . . . . 0 – 40° C (32 – 104° F)

Dimensions . . . . . . . . . . . . . . . . . . . . 57.5 x 81.6 x 21.0 mm (2.26 x 3.21 x 0.83 in.)

Weight . . . . . . . . . . . . . . . . . . . . . . . . Approx. 65 g (2.29 oz.) (CB-2LX)

Approx. 59 g (2.08 oz.) (CB-2LXE) (excluding

power cord)

• All data is based on tests by Canon.

• The finished product, or exterior may differ from this report.

166

Numerics

3:2 Guide................................................ 144

AC Adapter Kit.................................. 38, 150

Accessories.............................................. 36

AE Lock.................................................... 87

AF J Auto Focus

AF Frame ................................................. 22

AF Lock .................................................... 84

AiAF.......................................................... 82

Aquarium (Scene Mode) .......................... 56

Audio ........................................................ 47

AV Cable ............................................ 2, 112

Battery

Battery Charger........................... 2, 12, 38

Charge Indicator ................................... 13

Date/Time Battery................................. 18

Power Saving........................................ 51

Recharge .............................................. 12

Battery Charger........................................ 12

Beach (Scene Mode)................................ 55

Black and White Images........................... 73

Camera Shake ................................. 57, 145

Canon Digital Camera Solution Disk.... 2, 31

Clock Function.......................................... 52

Color Accent (Scene Mode) ............... 93, 98

Color Swap (Scene Mode) ................. 94, 98

Components Guide .................................. 40

Compression J Image Quality

Continuous Shooting................................ 72

Control Dial......................................... 39, 41

Date and Time

Adding to Image.................................... 60

Changing............................................... 18

Date/Time Battery................................. 18

Settings................................................. 17

Date and Time J Date/Time

Default Settings........................................ 49

Deleting J Erasing

Digital Macro (Scene Mode)..................... 64

Digital Tele-Converter .............................. 59

Digital Zoom ............................................. 58

Direct Print................................................ 27

Display Language..................................... 19

Display Overlay ...................................... 144

DPOF ..................................... 129, 131, 132

Editing

i-Contrast ............................................ 124

My Colors............................................ 123

Red-Eye Correction ............................ 125

Resizing (Making Images Smaller) ..... 121

Rotating Images.................................. 120

Trimming ............................................. 122

Enlarged Display .................................... 111

Equipment

Default Settings..................................... 49

Holding the Camera.............................. 11

Erase All................................................. 113

Erasing All Images ................................. 113

Erasing Images ........................................ 25

Error Messages...................................... 154

Exposure

AE Lock................................................. 87

Correction ............................................. 72

FE Lock................................................. 88

Face Detect .............................................. 82

Face Selection.......................................... 86

Face Self-Timer........................................ 62

Factory Settings J Default Settings

FE Lock .................................................... 88

File Number............................................ 140

Fireworks (Scene Mode) .......................... 56

Flash

Off ......................................................... 57

On ......................................................... 67

Supplementary Flash.................... 38, 150

Index

167

Focus

AF Frame .............................................. 22

AF Frame Mode .................................... 82

AF Lock................................................. 84

AF-Point Zoom...................................... 83

Face Selection ...................................... 86

Manual Focus........................................ 85

Servo AF ............................................... 84

Focus Check........................................... 110

Focus Lock ............................................... 78

Format J Memory Card, Formatting

Formatting (Memory Card) ....................... 50

FUNC. Menu

Basic Operations................................... 45

List ...................................................... 156

Green Leaves/Autumn Foliage (Scene Mode)

................................................................. 55

Grid Lines ............................................... 144

High Speed (ISO) ............................... 56, 70

High-Power Flash............................. 38, 150

Histogram ................................................. 44

Household Power ................................... 150

i-Contrast.......................................... 91, 124

Image Quality (Compression Ratio) ......... 68

Images

Display Time ......................................... 52

Editing J Editing

Erasing Images ..................................... 25

Playback J View

Protect................................................. 117

Indoor (Scene Mode)................................ 55

Infinity ....................................................... 67

Interface Cable ............................... 2, 26, 31

ISO Speed................................................ 70

ISO3200 (Scene Mode)............................ 56

Kids&Pets (Scene Mode) ......................... 54

Lamp................................... 40, 61, 142, 143

LCD monitor J Screen

Manual...................................................... 85

Manual Exposure...................................... 89

Manual Focus........................................... 85

Memory Cards.................................... 14, 16

Available Shots ..................................... 16

Formatting............................................. 50

Basic Operations................................... 46

List....................................................... 158

Metering Mode.......................................... 87

MMCplus/HC MMCplus Memory Card ..... 16

Mode Dial ................................................. 40

Movies

Editing ................................................. 101

Image Quality (Frame Rate).................. 99

Mode ..................................................... 98

Recording Pixels ................................... 99

Shooting Time................................. 29, 99

Viewing (Playback)................................ 30

MultiMediaCard J Memory Card

My Camera............................................. 147

My Category ........................................... 119

My Colors ......................................... 73, 123

Night Snapshot (Scene Mode) ................. 54

Number of Shots................................. 13, 62

Panoramic Photos .................................... 96

PictBridge ................................................. 26

Playback J View

Playback Button................................ 24, 146

Playback With Transition Effects ............ 111

Portrait (Scene Mode) .............................. 54

Postcard Size ........................................... 69

Power J Battery

Power Button............................................ 40

Power Saving ........................................... 51

Print Settings (DPOF)............................. 131

Index

168

Print/Share Button............................ 26, 145

Printer................................................. 26, 27

Printing ..................................................... 26

Program AE.............................................. 66

Protect.................................................... 117

Recording Pixels (Image Size)................. 68

Red-Eye

Auto Correction..................................... 92

Correction ........................................... 125

Reduction............................................ 142

Resizing (Making Images Smaller)......... 121

Rotating Images ..................................... 120

SCN (Scene Mode) .................................. 54

Screen

Display Language ................................. 19

Information Displayed ........................... 42

Menu Operations ............................ 45, 46

Switching the Display...................... 42, 43

SD/SDHC Memory Card .......................... 16

Self-Timer

10 second Self-Timer............................ 61

Changing Delay and

Number of Shots................................... 75

Face Self-Timer .................................... 62

Shoot .................................................... 62

Two Second Self-Timer ........................ 74

Sepia Tones ............................................. 73

Servo AF .................................................. 84

Shooting Date and Time J Date/Time

Shooting Using a TV ................................ 76

Shooting With Macro................................ 63

Shutter Button .......................................... 20

Slide Show ............................................. 107

Snow (Scene Mode)................................. 55

Software

Canon Digital Camera Solution Disk

... 2, 31

Transferring Images to a Computer...... 31

Sound Memos ........................................ 127

Sound Recorder ..................................... 135

Stitch Assist (Scene Mode) ...................... 96

Strap..................................................... 2, 11

Sunset (Scene Mode)............................... 55

Supplementary Flash ....................... 38, 150

Terminal ........................................... 26, 112

Tone (White Balance)............................... 71

Transferring Images to a Computer

.... 31, 128

Trimming ................................................ 122

Underwater (Scene Mode) ....................... 56

Video J Movies

Viewfinder................................................. 76

Viewing (Playback)

Enlarged Display................................. 111

Index Display ...................................... 104

Single Image Playback ......................... 24

Slide Show.......................................... 107

Viewing Images on a TV..................... 112

Viewing Images on a TV ........................ 112

Waterproof Case ...................................... 38

White Balance .......................................... 71

Wide (Recording Pixels)..................... 68, 69

World Clock ............................................ 139

Wrist Strap J Strap

You Think There is a Problem................ 151

Zoom ............................................ 21, 28, 58

169

Trademark Acknowledgments

• The SDHC logo is a trademark.

Disclaimer

• While every effort has been made to ensure that the information

contained in this guide is accurate and complete, no liability can be

accepted for any errors or omissions.

• Canon reserves the right to change the specifications of the hardware

and software described herein at anytime without prior notice.

• No part of this guide may be reproduced, transmitted, transcribed,

stored in a retrieval system, or translated into any language in any

form, by any means, without the prior written permission of Canon.

• Canon makes no warranties for damages resulting from corrupted or

lost data due to a mistaken operation or malfunction of the camera, the

software, SD memory cards (SD cards), personal computers,

peripheral devices, or use of non-Canon SD cards.

ik verkoop mijn IXUS 980IS voor 40 euro iemand intresse? 0495 83 66 92 Deurne zuid - Antwerpen. Zonder geheugenkaart Gesteld op 21-10-2018 om 12:28
Reageer op deze vraag Misbruik melden
- Merkwaardig, ik ben die van mij onlangs verloren in Deurne Zuid. Geantwoord op 22-10-2018 om 09:49
  Waardeer dit antwoord Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Canon Digital IXUS 980 IS bij:

nieuwe vragen en antwoorden
nieuwe handleidingen

U ontvangt een email met instructies om u voor één of beide opties in te schrijven.

Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Canon Digital IXUS 980 IS in de taal/talen: Engels als bijlage per email.

De handleiding is 14,41 mb groot.

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Canon Digital IXUS 980 IS

Canon Digital IXUS 980 IS Gebruiksaanwijzing - Nederlands - 171 pagina's

Canon Digital IXUS 980 IS Gebruiksaanwijzing - Deutsch - 170 pagina's

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.

Canon Digital IXUS 980 IS Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van Canon Digital IXUS 980 IS

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info

Canon Digital IXUS 980 IS Handleiding

Hulp nodig? Stel uw vraag in het forum

Forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van Canon Digital IXUS 980 IS

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info