Handleiding Canon Digital IXUS 330 (pagina 18 van 155) (Nederlands, Engels)

100366

Verklein

Vergroot

Pagina terug

1/155

Pagina verder

• Please read the Read this First section (p. 7).

• Please refer to the Software Starter Guide for

information on installing the software and

downloading images.

• Please refer to the Quick Start section for a simple

explanation of shooting, replaying and erasing (p. 12).

• Please also read the Printer User Guide included with

your Canon printer.

Camera User Guide

ENGLISH

CDI-E049

DIGITAL CAMERA

Camera User Guide

This Guide

Shooting with the Camera

Software Starter Guide

Installing the Software

This Guide

Connecting the Camera to a Computer

Software Starter Guide

Downloading Images to a Computer

Printer User Guide

Using the Printer and Printing

Precautions

This digital camera is designed to perform optimally when used

with genuine Canon brand digital camera accessories (“Canon

Brand Accessories”).

You may use non Canon Brand Accessories with this digital

camera. However, Canon makes no warranties concerning, and is

not responsible for damages resulting from, use of non Canon

Brand Accessories.

Flowchart and Reference Guides

Camera Body Temperature

If your camera is used for prolonged periods, the camera body may

become warm. Please be aware of this and take care when operating

the camera for an extended period.

About the LCD Monitor

The LCD monitor is produced with extremely high-precision manufac-

turing techniques. More than 99.99% of the pixels operate to

specification. Less than 0.01% of the pixels may occasionally misfire

or appear as red or black dots. This has no effect on the recorded

image and does not constitute a malfunction.

Video Format

Please set the camera’s video signal format to the one used in your

region before using it with a TV monitor (p. 118).

Charging the Date/Time Battery

• The camera has a built-in rechargeable lithium battery that

maintains the date, time and other camera settings. This battery

recharges when the main battery pack is inserted into the camera.

When you first purchase the camera, place a charged battery pack

in it or use the AC adapter kit (sold separately) for at least 4 hours

to charge the date/time battery. It will charge even when the

camera power is set to Off.

• If the Set Date/Time menu appears when the camera power is

turned on, it means that the date/time battery charge is depleted.

Recharge it as described above.

Symbols Used

Icons on the right end of title bars show the operations mode. As in the

example below, the mode dial should be set to , ,

or .

Self-timer

White buttons indicate the button that

will be pushed in the particular procedure.

In the example here, for instance, you

should press the MENU button.

This mark denotes issues that may affect the camera’s operation.

This mark denotes additional topics that complement the basic

operating procedures.

Question? Look here first.

■ How do I navigate the Menu?

Selecting Menus and Settings (p. 37)

■ What settings are available under each function?

and

Will my settings remain in effect even after I’ve turned the camera off?

Functions Available in Each Shooting Mode (p. 76)

■ How do I go about printing?

About Printing (p. 94)

■ What functions are available through the menu?

Rec. Menu (p. 122)

Play Menu (p. 125)

Setup Menu (p. 127)

My Camera Settings (p. 129)

About this Guide

Table of Contents

Items marked with

■

are lists or charts that summarize camera

functions or procedures.

Read this First

Please Read .......................................................................... 7

Safety Precautions ............................................................... 7

Preventing Malfunctions ................................................... 11

Quick Start

Quick Start ......................................................................... 12

Components Guide

Front View .........................................................................14

Back View .......................................................................... 15

Operation Panel ................................................................ 16

Indicators ........................................................................... 17

Mode Dial .......................................................................... 18

Preparing the Camera

Charging the Battery Pack ................................................ 19

Installing the Battery Pack ................................................ 21

Installing a CF Card ........................................................... 23

Setting the Date / Time ..................................................... 25

Setting the Language ....................................................... 26

Basic Functions

Turning the Power On / Off ............................................... 27

Using the LCD Monitor ..................................................... 29

Using the Viewfinder ........................................................ 33

Pressing the Shutter Button .............................................. 34

Using the Zoom ................................................................. 36

Selecting Menus and Settings .......................................... 37

Menu Settings and Factory Defaults ................................ 40

Table of Contents

Customizing the Camera (My Camera Settings)

Changing My Camera Settings ......................................... 43

Customizing My Camera Settings ..................................... 44

Shooting

Selecting a Shooting Mode ............................................... 45

Reviewing an Image Right after Shooting ....................... 46

Changing Resolution/Compression Settings ..................... 47

Using the Flash ..................................................... 49

Shooting Close-Ups/Infinity Shots ........................ 51

Using the Digital Zoom ..................................................... 52

Shooting Continuously ......................................... 53

Using the Self-timer .............................................. 54

Shooting in Stitch Assist Mode ............................. 55

Shooting a Movie .................................................58

Locking the Focus (AF Lock) .............................................. 60

Locking the Exposure Setting (AE Lock) ........................... 62

Locking the Flash Exposure Setting (FE Lock) .................. 63

Switching between Autofocus Modes ............................. 64

Switching between Light Metering Modes ......... 65

Adjusting the Exposure Compensation ............... 66

Shooting in Long Shutter Mode ....................................... 67

Setting the White Balance ................................... 69

Setting a Custom White Balance ...................................... 70

Changing the Photo Effect ................................... 72

Adjusting the ISO Speed ................................................... 73

Setting the Auto Rotate Function .................................... 74

Resetting the File Number ................................................ 75

Functions Available in Each Shooting Mode ................... 76

Replaying

Viewing Images Individually (Single Image View) ........... 78

Magnifying Images ............................................... 79

Viewing Images in Sets of Nine (Index View) ........

Viewing Movies ................................................................. 81

Table of Contents

Rotating Images in the Display ......................................... 83

Attaching Sound Memos to Images ................................. 84

Automating Playback (Slide Shows) ................................. 86

Protecting Images ............................................................. 90

Erasing

Erasing Single Images ........................................... 91

Erasing All Images ............................................................. 92

Formatting CF Cards ..........................................................93

Printing

About Printing ................................................................. 94

Print Menu Settings ......................................................... 96

Connecting a Printer ......................................................... 98

Printing ............................................................................ 101

Setting the Print Settings (Direct Print Function) ........... 103

Setting the DPOF Print Settings ...................................... 107

Image Transmission Settings (DPOF Transfer Order)

Selecting Images for Transferring .................................. 116

Shooting/Replaying with a TV Monitor

Shooting/Replaying with a TV Monitor ......................... 118

Downloading Images to a Computer

Downloading Directly from a CF Card ............................ 119

Connecting the Camera to a Computer with a USB Cable ....

120

Lists of Menu Options and Messages

Rec. Menu ....................................................................... 122

Play Menu ....................................................................... 125

Set Up Menu ................................................................... 127

My Camera Menu ........................................................... 129

Resetting All Settings to Their Default Values ............... 132

List of Messages ............................................................... 133

Table of Contents

Appendices

Using a Household Power Source ................................... 137

Using a Car Battery Charger ........................................... 138

Camera Care and Maintenance ...................................... 139

Troubleshooting .............................................................. 140

Specifications

Specifications ................................................................... 144

Index

Index ............................................................................ 150

Please Read

Test Shots

Before you try to photograph important subjects, we highly recommend

that you shoot several trial images to confirm that the camera is operating

and being operated correctly. Please note that Canon, its subsidiaries and

affiliates, and its distributors are not liable for any consequential damages

arising from any malfunction of a camera or accessory, including

CompactFlash™ cards, that results in the failure of an image to be recorded

or to be recorded in a format that is machine readable.

Warning Against Copyright Infringement

Please note that Canon digital cameras are intended for personal use and

should never be used in a manner that infringes upon or contravenes

international or domestic copyright laws and regulations. Please be advised

that in certain cases the copying of images from performances, exhibitions, or

commercial properties by means of a camera or other device may contravene

Warranty Limitations

This camera’s warranty is only effective in the country of sale. If a problem

arises while the camera is in use abroad, please convey it back to the country

of sale before proceeding with a warranty claim to a Canon Customer

Support Help Desk.

For Canon Customer Support contacts, please see the Canon

Limited Warranty supplied with your camera.

Safety Precautions

• Before using the camera, please ensure that you read and understand

the safety precautions described below. Always ensure that the camera

is operated correctly.

• The safety precautions noted on the following pages are intended to

instruct you in the safe and correct operation of the camera and its

accessories to prevent injuries or damage to yourself, other persons

and equipment.

• In the next few pages, the term “equipment” refers primarily to the

camera and its power supply accessories, such as the battery charger

and optional compact power adapter or car battery charger.

Read this First

Read This First

Warnings

• Do not aim the camera directly into the sun or at other intense light

sources that could injure your eyesight.

• Do not trigger the flash in close proximity to human or animal eyes.

Exposure to the intense light produced by the flash may injure eyesight.

In particular, remain at least one meter (39 inches) away from infants

when using the flash.

• Store this equipment out of the reach of children and infants.

Accidental damage to the camera or batteries by a child could result in

serious injury. In addition, placement of the strap around the child’s

neck could result in asphyxiation.

• Do not attempt to disassemble or alter any part of the equipment that

is not expressly described in this guide. Disassembly or alteration may

result in high-voltage electrical shock. Internal inspections, alterations

and repairs should be conducted by qualified service personnel

authorized by your camera distributor or a Canon Customer Support

Help Desk.

• To avoid the risk of high-voltage electrical shock, do not touch the flash

portion of the camera if it has been damaged. Similarly, never touch

internal portions of the equipment that become exposed as a result of

damage. There is a risk of high-voltage electrical shock. Please take the

first opportunity to consult your camera distributor or the closest

Canon Customer Support Help Desk.

• Stop operating the equipment immediately if it emits smoke or noxious

fumes. Failure to do so may result in fire or electrical shock.

Immediately turn the camera’s power off, remove the camera battery

and unplug the power cord from the electrical outlet. Confirm that

smoke or fume emissions have ceased. Please consult your camera

distributor or the closest Canon Customer Support Help Desk.

• Stop operating the equipment if it is dropped or the casing is damaged.

Failure to do so may result in fire or electrical shock. Immediately turn the

camera’s power off, remove the camera battery and unplug the power

cord from the electrical outlet. Please consult your camera distributor or

the closest Canon Customer Support Help Desk.

Read This First

• Do not allow the equipment to come into contact with, or become

immersed in, water or other liquids. Do not allow liquids to enter the

interior. The camera has not been waterproofed. If the exterior comes

into contact with liquids or salt air, wipe it dry with a soft, absorbent

cloth. If water or other foreign substances enter the interior, immedi-

ately turn the camera’s power off and remove the camera battery or

unplug the power cord from the electrical outlet. Continued use of the

equipment may result in fire or electrical shock. Please consult your

camera distributor or the closest Canon Customer Support Help Desk.

• Do not use substances containing alcohol, benzene, thinner or other

flammable substances to clean or maintain the equipment. The use of

these substances may lead to fire.

• Remove the power cord on a regular periodic basis and wipe away the

dust and dirt that collects on the plug, the exterior of the electrical

outlet and the surround area. In dusty, humid or greasy environments,

the dust that collects around the plug over long periods of time may

become saturated with humidity and short-circuit, leading to fire.

• Do not cut, damage, alter or place heavy items on the power adapter

cord. Any of these actions may cause an electrical short circuit, which

may lead to fire or electrical shock.

• Do not handle the power cord if your hands are wet. Handling it with

wet hands may lead to electrical shock. When unplugging the cord,

ensure that you hold the solid portion of the plug. Pulling on the

flexible portion of the cord may damage or expose the wire and

insulation, creating the potential for fires or electrical shocks.

• Use of power sources not expressly recommended for this equipment

may lead to overheating, distortion of the equipment, fire, electrical

shock or other hazards. Use only the recommended power accessories.

• Do not place the batteries near a heat source or expose them to direct

flame or heat. Neither should you immerse them in water. Such

exposure may damage the batteries and lead to the leakage of

corrosive liquids, fire, electrical shock, explosion or serious injury.

• Do not attempt to disassemble, alter or apply heat to the batteries.

There is serious risk of injury due to an explosion. Immediately flush

with water any area of the body - including the eyes and mouth, or

clothing - that comes into contact with the inner contents of a battery.

If the eyes or mouth contact these substances, immediately flush with

water and seek medical assistance.

Read This First

• Avoid dropping or subjecting the batteries to severe impacts that could

damage the casings. It could lead to leakage and injury.

• Do not short-circuit the battery terminals with metallic objects, such as

key holders. It could lead to overheating, burns and other injuries. Use

the supplied terminal cover or battery case to transport or store the

battery pack.

• Before you discard a battery, cover the terminals with tape or other

insulators to prevent direct contact with other objects. Contact with

the metallic components of other materials in waste containers may

lead to fire or explosions. Discard the batteries in specialized waste

facilities if available in your area.

• Use of batteries not expressly recommended for this equipment may

cause explosions or leaks, resulting in fire, injury and damage to the

surroundings. Use only recommended batteries and accessories.

• Use the specified battery charger to charge Battery Pack NB-1LH or

NB-1L. Use of other chargers may lead to overheating, distortion of

the equipment, fire or electrical shock.

• Disconnect the battery charger and compact power adapter from both

the camera and the electrical outlet after recharging and when they are

not in use to avoid fire and other hazards. Continuous use over a long

period may cause a unit to overheat and distort, resulting in fire.

• The camera terminal of the supplied compact power cord is designed

for exclusive use with your camera. Do not use it with other products

or batteries. There is a risk of fire and other hazards.

Cautions

• Avoid using, placing or storing the equipment in places subject to

strong sunlight or high temperatures, such as the dashboard or trunk

(boot) of a car. Exposure to intense sunlight and heat may cause the

batteries to leak, overheat or explode, resulting in fire, burns or other

injuries. High temperatures may also cause deformation of the casing.

Ensure that there is good ventilation when using the compact power

adapter to charge the battery pack or power the camera.

• Do not store the equipment in humid or dusty areas. Storage in such

areas could lead to fire, electrical shock or other damage.

• Be careful not to bang the camera or subject it to strong impacts or

shocks that could lead to injury or damage the equipment when

wearing or holding it by the strap.

Read This First

• Be careful not to cover the flash with your fingers when shooting. In

addition, do not touch the surface of the flash after taking several

pictures in rapid succession. Either action could result in burns.

• If your camera is used for prolonged periods, the camera body may

become warm. Please take care when operating the camera for

extended periods as your hands may experience a burning sensation.

Preventing Malfunctions

Avoid Strong Magnetic Fields

Never place the camera in close proximity to electric motors or other

equipment generating strong electromagnetic fields. Exposure to

strong magnetic fields may cause malfunctions or corrupt image data.

Avoid Condensation Related Problems

Moving the equipment rapidly between hot and cold temperatures

may cause condensation (water droplets) to form on its external and

internal surfaces. You can avoid this by placing the equipment in an

airtight, resealable plastic bag and letting it adjust to temperature

changes slowly before removing it from the bag.

If Condensation Forms Inside the Camera

Stop using the camera immediately if you detect condensation.

Continued use may damage the equipment. Remove the CF card and

battery or Compact Power Adapter (if connected) from the camera and

wait until the moisture evaporates completely before resuming use.

Extended Storage

When not using the camera for extended periods of time, remove the

battery pack and store the equipment in a safe place. Storing the

camera for extended periods with a battery pack installed will run

down the battery pack and may damage the camera. Please note,

however, that the date, time and other camera settings may reset to

the default settings if the battery pack has been removed for more

than three weeks. Follow the instructions in this guide to reset the

desired settings.

Battery Lock

Charge the Battery Pack (p. 19).

Place the battery pack in the battery

charger and plug the charger into an

electrical outlet. The charging indicator

shines red while charging and changes to

green when the battery pack is charged.

Install the Battery Pack (p. 21).

Slide the battery cover open and press the

battery lock while you insert the battery

pack. Insert the battery pack correctly by

aligning the arrows on the camera and

battery pack.

Install the CF Card (p. 23).

Slide the lock on the CF card cover to

open it and insert the CF card.

Turn the Mode Dial to (Auto)

(p. 45).

Turn on the Power (p. 27).

Press the ON/OFF Button until the green

power lamp beside the mode dial lights.

Quick Start

Lock for the CF Card

Slot Cover

Charging Indicator

Quick Start

Focus (p. 34).

Aim the camera and lightly press (halfway)

the shutter button. Two beeps will sound

when the autofocus is set.

Shoot (p. 35).

Press the shutter button all the way. One

shutter sound will sound when the shot is

complete.

View the Recorded Image

(p. 46).

The recorded image appears in the LCD

monitor for approximately 2 seconds. To

continue displaying the image, keep the

shutter button pressed or hold the shutter

button until you press the

button and

then release both.

• To Immediately Delete the Displayed Image

1. Press the

button while the

image is displayed.

2. Confirm that [Erase] is selected

and press the

button.

• Set the date and time if the Set Date/Time menu appears

(p. 25).

• You can change the language in which menus are displayed

(p. 26).

• To view the other images you have photographed, refer to

the Replaying section (p. 78).

• After you finish using the camera, press the ON/OFF Button

to shut the power off.

Components Guide

Front View

●

Shutter Button (p. 34)

●

Microphone

●

Optical Viewfinder Window (p. 33)

●

AF-assist Beam (p. 35)

●

Red-Eye Reduction Lamp (p. 50)

●

Self-Timer Lamp (p. 54)

●

Lens

●

Flash (p. 49)

●

A /V OUT (Audio/Video

Out) Terminal (p. 118)

●

Terminal Cover

●

Digital Terminal

(pp. 99, 100, 120)

• The following cables are used to connect the camera to a

computer or printer.

- Computer (p. 120)

USB Interface Cable IFC-300PCU (supplied with camera)

- Direct Print Function compliant printer (sold separately) (p. 98)

Direct Interface Cable DIF-100 (supplied with printer)

- Direct Print Function compliant Bubble Jet Printer

(sold separately) (p. 99)

Please refer to your Bubble Jet Printer Quick Start Guide)

Please refer to the System Map supplied with the camera for direct

print function compatible printers.

Components Guide

Back View

●

Speaker

●

Viewfinder (p. 33)

●

Lock for the CF Card Slot Cover (p. 23)

●

Battery Cover (p. 21)

●

DC Coupler Terminal Cover (p. 137)

●

CF Card Slot Cover (p. 23)

●

Strap Eyelet

Attaching the Wrist Strap*

●

LCD Monitor (p. 29)

●

Tripod Socket

* Be careful not to wave the camera about or catch it on other items

when dangling it from the wrist strap.

1 2

Components Guide

Operation Panel

●

Indicators (p. 17)

●

Power Lamp

Lights when the power is on or transmission preparations

are complete when connected to a computer

●

Zoom Button

Shooting: (Telephoto)/

(Wide Angle) Button (p.

36)

Replay:

(Magnify) (p. 79)/

(Index) (p. 80) Button

●

Mode Dial (p. 18)

●

ON/OFF Button (p. 27)

●

(Light Metering) (p. 65)/ Button

●

(Flash) (p. 49) / Button

●

(Continuous) (p. 53) /

(Self-timer) (p. 54) / Button

●

(Macro) / (Infinity) (p. 51 )/ Button

●

(Exposure) (p. 66)/ (White Balance) (p. 69)/

(Photo Effects) (p. 72)/ (Single Image Erase)

(p. 91) Button

●

(Display) Button (p. 29)

●

(Menu) Button (p. 37)

●

(Set) Button

Components Guide

Indicators

The indicators shine or flash when the ON/ OFF Button or shutter

button is pressed.

Upper Indicator

Green: Ready to shoot

Flashing Green: Initializing camera / Recording to CF card /

Reading CF card / Erasing from CF card/

Transmitting data (during a computer connection)

Orange: Ready to shoot with slow shutter speed (flash on)

Flashing Orange: Ready to shoot but shutter speed is slow (camera

shake warning)

Lower Indicator

Yellow: Macro mode / Infinity mode/Focus lock

(Method 2, p. 60)

Flashing Yellow: Focusing difficulty (1 beep sounds).

Although you can press the shutter button, you

are recommended to use the focus lock (p. 60).

Components Guide

Mode Dial

The mode dial is used to select shooting or replay modes.

Shooting Modes

(Auto)

• The camera selects most settings automatically (p. 45).

(Manual)

• You can set the exposure compensation, white balance and other

settings manually (p. 45).

(Stitch Assist)

• Shoot images in overlapping series to create panoramas (p. 55).

(Movie)

• Shoot movie clips (p. 58).

Replay Mode

(Replay)

• Images recorded onto the CF card can be replayed or erased

(pp. 78, 91).

• Recorded images can be printed when a printer (sold separately) is

connected (p. 94).

• Images can be downloaded to and viewed on a computer when it

is connected (p. 119).

• The or icon displays on the LCD monitor when a

connection to a printer is opened.

• The LCD monitor shuts off while a computer is connected.

Preparing the Camera

Charging the Battery Pack

Use the following procedures to charge the battery pack the first time you

use the camera or when the “Change the battery pack” message displays.

Battery charger model names and types vary by region.

• Insert the battery pack all the way into the battery charger as shown

and insert the charger’s plug into an electrical outlet.

• Align the battery pack correctly with the arrows on it and the charger.

• The charging indicator will shine red while the battery pack is

charging. It will change to green when the charge is complete.

• After charging, unplug the battery charger and remove the battery pack.

• To protect the battery pack and prolong its life, do not

charge it for longer than 24 hours continuously.

• Since this is a lithium ion battery pack, you need not completely

discharge it before recharging. It can be recharged at any point.

• It takes approximately 130 minutes to fully charge the battery

pack from a fully discharged state (based on standard Canon

testing criteria). Please charge it at an ambient temperature

ranging between 5º and 40º C (41º and 104º F).

• Charge times may vary according to the ambient temperature

and the battery pack’s charge state.

• See Battery Capacity (p. 146).

CB-2LS

Charging Indicator

CB-2LSE

Charging Indicator

Preparing the Camera

Handling Precautions

• Keep the battery pack terminals ( ) clean at all times. Dirty

terminals may cause poor contact between the battery pack and

camera. Polish the terminals with a tissue or a dry cloth before

charging or using the battery pack.

• Do not rapidly overturn or wave the battery charger around when it

contains the battery pack. The battery pack could fly out.

• At low temperatures, battery pack performance may be reduced and

the low battery icon may appear earlier than usual. Under these

conditions, resuscitate the battery pack by warming it in a pocket

immediately before use. However, ensure that there are no metallic

items in the pocket that could cause a short circuit, such as a key

holder, etc.

• Do not place anything, such as tablecloths, carpets, bedding or

cushions, on top of the battery charger while it is charging. Heat will

build up and could result in a fire.

• Do not charge batteries other than Battery Pack NB-1LH or NB-1L in

this charger.

• The battery pack continues to discharge a minimal portion of its

power while installed in the camera, even with the power off, or in

the charger. This will shorten battery life.

• Do not allow any metal objects such as keyrings to touch the “+”

and “-” terminals (Fig. A), as this can damage the battery pack. To

carry the battery pack or store it during periods of disuse, always

replace the terminal cover (Fig. B) or place it in the supplied case and

store it in a cool, dry place. Recharge it fully before using it again.

Fig. A Fig. B

• If the performance of the battery pack diminishes substantially even

when it is fully charged, its life has been exceeded and it should be

replaced.

Preparing the Camera

Installing the Battery Pack

Install Battery Pack NB-1LH (supplied) as shown below. Battery Pack

NB-1L (optional) can also be used with the camera.

• Please recharge the battery pack (p. 19) before you use it

for the first time.

• Slide the battery cover in the direction

of the arrows.

• Press the battery lock while inserting

the battery pack all the way in until the

lock clicks.

• Insert the battery pack correctly by

aligning the arrows on the camera and

the battery pack.

• To remove the battery pack, press the

battery lock and pull the battery pack out.

• Slide the battery cover closed.

• Do not turn off the power or open the battery cover while the

camera’s indicator flashes green. The camera is writing, reading,

erasing or transmitting an image to or from the CF card.

• Remove the battery pack when the camera is not in use.

Please note, however, that the date, time and other camera

settings may reset to the default settings if the battery pack

has been removed for more than three weeks.

Battery Lock

Preparing the Camera

Battery Pack Charge

The following icons and messages will display when the battery pack

charge is low.

Battery pack charge is low. Recharge it as soon as possible before

it is required for an extended period.

When the LCD monitor is off, this icon will display when you

press the , /

, / , or button ( mode).

Battery charge is insufficient to operate the camera. Replace

the battery pack immediately.

• See Battery Capacity (p. 146).

• Please use a household power source for extended use of

the camera (p. 137).

Change the

battery pack

Preparing the Camera

Installing a CF Card

Turn the camera power off and insert the CF card with the following

procedures.

• Slide the lock down and open the CF

card slot cover.

• Insert the CF card with its label facing

upward until the slot’s eject button fully

extends. Close the CF card slot cover.

• To remove the CF card, push the eject

button and pull the CF card out.

CF Card Eject Button

• Since the camera is writing, reading, erasing or transmitting

data to or from the CF card when the indicator flashes

green, never perform the following actions during this time.

It could corrupt the image data.

- Subject the camera body to vibration or shocks.

- Turn the camera’s power off or open the CF card slot cover.

• Please note that CF cards from other manufacturers, or CF

cards which have been edited with application software

using other formats, may not operate correctly in the

camera.

Label

Preparing the Camera

Handling Precautions for CF Cards

• CF cards are high-precision electronic devices. Do not bend them,

apply force to them, or subject them to shocks or vibration.

• Do not attempt to disassemble or alter a CF card.

• Moving a CF card rapidly between temperature extremes will cause

condensation to form in the card and lead to a malfunction. To avoid

condensation, place the CF card in a sealed plastic bag before moving

it into a different temperature zone and allow it to adjust slowly to the

new temperature. If condensation forms on the CF card, store it at

room temperature until the water droplets have evaporated naturally.

• Do not use or store CF cards in the following types of location.

- Locations subject to dust or sand

- Locations subject to high humidity and high temperatures

• See CF Cards and Estimated Capacities (p. 147).

Preparing the Camera

Setting the Date and Time

The Set Date / Time menu will appear the first time the camera power is

turned on or whenever the built-in rechargeable lithium battery charge

is low. Start from Step 3 to set the date and time.

• Press the ON/OFF Button until the

power lamp lights.

• Press the

button to display the

Rec. or Play menu.

• Use the

or button to select the

(Set up) menu.

• Use the

or button to select .

• Use the

or button to select a field

(year, month, day, hour, minute and

date format), and the

button to change its value.

• To put the settings into effect, press the

button after setting the date

format.

• Press the

button to redisplay the

Rec. or Play menu.

• Please note that the date and time settings may reset to the

default settings if the camera battery has been removed for

more than three weeks. Reset them when this occurs.

Preparing the Camera

Setting the Language

The language in which menus and messages are displayed can be

selected with this function.

• Press the ON/OFF Button until the

power lamp lights.

• Press the

button to display the

Rec. or Play menu.

• Use the

or button to select the

(Set up) menu.

• Use the

or button to select .

• Use the

, , or button to

select a language.

• Press the button to redisplay the

Rec. or Play menu.

• The Language menu can also be displayed in replay mode

by holding down the

button and pressing the

button. However, language settings cannot be adjusted

while a printer is connected.

Basic Functions

Turning the Power On / Off

• Press the ON / OFF Button until the

green power lamp lights.

- The upper indicator beside the

viewfinder will flash green.

- The lens will extend when the mode

dial is turned to the

, ,

position.

- The lens will retract approximately 1

minute after the mode dial is turned

from any shooting mode.

- When the mode dial is set to the

or position, the LCD monitor

will turn on regardless of its On/Off

status.

• Press the ON/OFF Button again to turn

off the power.

• The Set Date/Time menu will appear the first time the

camera power is turned on or whenever the charge of the

built-in rechargeable lithium date/time battery is low. Reset

the date and time when this occurs (p. 25).

• If the auto power save function activates, press the ON/OFF

Button to restore power.

Basic Functions

• Power Save Function

This camera is equipped with a power save function. The

power will automatically shut down under the following

circumstances when this function is set to On. Press the ON/

OFF Button to restore power.

Shooting Mode

Powers down approximately 3 minutes after the last

control is accessed on the camera. (The LCD monitor

automatically turns off 3 minutes after the last control is

accessed even if this function is set to Off. Press any

button except the ON/OFF Button to turn the LCD

monitor back on.)

Replay Mode

Powers down approximately 5 minutes after the last

control is accessed on the camera.

Connected to a Printer

(optional)

Powers down approximately 5 minutes after the last

control is accessed on the camera or something is

printed on a connected printer.

Connected to a Computer

A warning message displays on the computer screen

approximately 5 minutes after the last control is

accessed. Powers down approximately 1 minute later if

no control is accessed.

• The power save function will not activate during a slide

show.

• The camera’s settings can be changed to turn off the power

save function (p. 127).

Basic Functions

Using the LCD Monitor

The LCD monitor can be used to compose images while shooting,

adjust settings menus and replay images.

• The image in the LCD monitor will darken in strong sunlight

or bright light. This does not constitute a malfunction.

Shooting Mode

( , ,

and on the mode dial)

• The LCD monitor turns on or changes

the display mode as follows with each

press of the

button.

Standard (No Information)

Detailed (Information View)

Off

• The LCD monitor setting (On or Off) is saved by the camera

when the power is turned off so that the same setting is

automatically available when the power is turned on again.

However, the setting may be lost when the power has been

turned off after the “Change the battery pack” message has

displayed, while the LCD monitor was on in shooting mode.

• In the

or mode, the LCD monitor turns on regardless

of its On/ Off setting.

• Set the flash to [On] or affix the camera to a tripod when

the upper indicator flashes orange and the camera blur

warning icon (

) appears in the LCD monitor after the

metering preparations are complete.

▼

Basic Functions

Replay Mode ( on the mode dial)

• The LCD monitor will turn on when the

mode dial is set to the

position.

• In replay mode, pressing the

button cycles between display modes.

Single Image Replay

Standard Detailed No Display

Multi Image Replay (9 Images)

Standard No Display

Information Displayed on the LCD Monitor

Shooting Mode

In shooting mode, information about the current settings and

remaining image capacity will display on the LCD monitor for

approximately six seconds when the actions below are taken,

regardless of whether the LCD monitor is set to On or Off.

• The power is turned on.

• The

, , /

, / or button ( mode) is pressed.

• The camera settings are changed.

• The Rec., Setup or My Camera menu is closed.

While this information is displayed, you may set the flash,

continuous mode, self-timer, macro and infinity settings.

• After you press the shutter button and take a shot, the

recorded image appears on the LCD monitor for 2 (or 10)

seconds. (It will continue to display if you press the

button while it is shown on the screen.) While it is displayed,

you can check the exposure with the graph (see Histogram,

p. 32) that shows the distribution of the brightness data.

(Press the

button if the histogram and other

information is not shown) If the exposure requires

adjustment, set the exposure compensation and reshoot.

▼

Basic Functions

Information Displayed

Recordable Images

or Recordable

Movie Time (sec.)

In movie mode, only the

resolution shows (not

compression).

p. 45

p. 66

p. 67

p. 69

p. 72

p. 47

p. 73

p. 74

p. 60

p. 62

p. 63

p. 49

p. 53/54

p. 51

p. 65

p. 58

p. 52

p. 29

p. 22

Shooting Mode

Exposure Compensation

Long Shutter

White Balance

Photo Effects

Compression

Resolution

ISO Speed

Auto Rotate

Focus Lock

AE Lock

FE Lock

Flash

Shooting Method

Macro/Infinity

Metering Method

Movie Recording

Digital Zoom

Camera Blur Warning

Low Battery

• The icons in the shaded boxes above display

regardless of the selected display mode.

• Zoom powers reflect the optical and digital

zoom functions in combination. These figures

display when the digital zoom is activated.

Replay Mode (Standard Display)

File Number

Image Number

Shooting Date

The following information is displayed in

standard display mode.

p. 47

p. 85

p. 58

p. 90

Compression

Resolution (still)

Wave Format Sound

Movie

Protection Status

AF Frame

Spot AE

Point Frame

Basic Functions

Replay Mode (Detailed Display)

Histogram

In detailed display mode, the following

supplementary information is displayed.

p. 67

p. 45

p. 66

p. 69

p. 72

p. 73

p. 49

p. 51

p. 65

p. 47

p. 58

Long Shutter Mode

Shooting Mode

Exposure Compensation

White Balance

Photo Effects

ISO Speed

Flash

Macro/Infinity

Metering Method

Resolution (Movie)

Movie Length Shown on Movie Files

The following information may also be displayed with some images.

A sound file in a format other than the WAV format is attached or the

file format is not recognized.

JPEG file with format not conforming to Design rule for Camera File

System Standards

RAW format file

File with unrecognized format

• The image information may not display correctly if images

shot with this camera are replayed on other cameras or

images from other cameras are replayed on this camera.

• Histogram Function

The histogram is a graph that allows you to judge the

brightness of the recorded image. The greater the bias toward

the left, the darker the image. The more it trends to the right,

the brighter the image. If the image is dark, adjust the

exposure to a positive value. Similarly, adjust the exposure to a

negative value to darken a bright image (p. 66).

Histogram

Examples

Dark Image Balanced Image Bright Image

Basic Functions

Viewfinder

• About the Autofocus Function

This camera employs AiAF (artificial intelligence autofocus)

technology which uses a broad metering field to calculate

the focal distance with high precision. It delivers a crisp

focus even when the photographic subject is slightly off-

center.

The AiAF function can be turned off so that the autofocus

is metered from a fixed AF frame at the center of the field

to accommodate difficult shooting conditions (p. 64).

• Image Seen in Viewfinder vs. Recorded Image

Please note that the actual image may differ from the

image seen in the optical viewfinder due to the physical

separation between the viewfinder and lens. This is called

the parallax phenomenon and is more noticeable the

closer the subject is to the lens. In some cases, portions of

images shot up close that appear in the viewfinder will

not appear in the recorded image. You are recommended

to use the LCD monitor to shoot images up close.

Using the Viewfinder

The optical viewfinder can be used to conserve power while shooting.

Aim the square brackets (autofocus metering field) inside the

viewfinder at the primary subject to shoot. The field of vision is

approximately 82% at the maximum telephoto setting.

AF Brackets

Basic Functions

Pressing the Shutter Button

The shutter button features a two-stage action.

Pressing Halfway

Pressing halfway automatically sets the exposure, focus and white

balance.

• Indicator Status

Upper Indicator

- Green: Metering complete (two

beeps sound)

- Orange: Flash will fire

- Flashing Orange:

Camera shake warning/

Insufficient exposure

Lower Indicator

- Yellow: Macro mode/I nfinity

mode / Focus lock

(Method 2, p. 60)

- Flashing Yellow:

Focusing difficulty*

(single beep sounds)

* When the indicator flashes yellow, lock

the focus before shooting (p. 60).

• AF Frame Status (LCD Monitor On)

AiAF On

- Green Frame:

Metering complete (AF

frame when focus

achieved)

- No Frame: Focusing difficulty

AiAF Off (Center AF Frame)

- Green Frame:

Metering complete

- Yellow Frame:

Focusing difficulty

Indicator

Basic Functions

Pressing Fully

Pressing the shutter button down fully activates the shutter and causes

one shutter sound to sound.

• While the image is being recorded to

the CF card, the indicator flashes green.

• AF-assist Beam

- The AF-assist Beam will sometimes emit when the

shutter button is pressed halfway to assist focusing in

certain conditions. i.e. dark conditions.

- The AF-assist Beam can be turned off (p. 123). If animals

are your subject, turn off the beam when shooting in

the dark to avoid startling them (this may however,

make it more difficult for the camera to focus).

Basic Functions

Using the Zoom

The zoom can be adjusted to any setting in the 35 to 105 mm range in

35 mm film equivalent terms.

Telephoto / Wide Angle

• Pressing the button zooms in,

making the subject appear larger in the

composition.

• Pressing the

button zooms out,

making the subject appear smaller in

the composition.

Digital Zoom

When the LCD monitor is on, you can shoot with a combined optical

and digital zoom factor of up to 7.5 (p. 52).

• The digital zoom is unavailable in some modes (p. 77).

• Please note that the image appears grainier, the more the

image is digitally zoomed.

Basic Functions

Selecting Menus and Settings

Menus are used to adjust shooting and replay settings. The procedures

for using menus are shown below. For a complete list of the settings and

options, please see the Menu Settings and Factory Defaults (p. 40).

• Press the

button.

• Use the

or buttons to select the Rec., Play or Set up

menu.

• Use the or buttons to select an option.

• With some Rec. /Set up menu items,

the

or buttons select the options

for the items.

• With some Play /Set up menu items, a

submenu appears after you press the

button.

• Press the

button.

• When the Mode

Dial is set to ,

, or .

• When the Mode

Dial is set to .

Basic Functions

Selecting Menus and Settings (Cont’d)

Play Menu

Rec. Menu

Selecting

a Mode

Selecting

a Menu

Switching between the Rec., Play,

Set up and My Camera Menus

Basic Functions

Set up Menu

My Camera Menu

Setting

Options

Completing

the Procedure

• See Print Menu Settings (p. 96) for the procedures used with

the

(Print Order) item in the Play menu.

* You can switch between menus at

any time simply by pressing the

or button.

Basic Functions

Menu Settings and Factory Defaults

This chart shows the options and default settings for each menu.

p. 47

p. 73

p. 33

p. 52

p. 54

p. 46

p. 35

p. 75

p. 74

p. 67

p. 90

p. 83

p. 84

p. 92

p. 86

p. 107

p. 116

1600 x 1200* / 1024 x 768 / 640 x 480

640 x 480 / 320 x 240* / 160 x 120

Superfine / Fine* / Normal

50* / 100 / 200 / 400 / AUTO

On*/Off

On/Off*

Off/2 sec.*/10 sec.

On*/Off

On/Off*

On*/Off

On/Off*

Turns image protection On/ Off.

Rotates the image in the display.

Allows sounds to be added to images.

Erases all images on the CF card.

Replays selected images in a slide show.

Sets the print settings.

Sets the transfer settings.

Resolution (Stills)

Resolution (Movies)

Compression

ISO Speed

AiAF

Digital Zoom

Self-timer

Image Review

AF-assist Beam

File No. Reset

Auto Rotate

Long Shutter

Protect

Rotate

Sound Memo

Erase all

Slide Show

Print Order

Transfer Order

Menu Item

Reference

Page

Available Settings

Rec.

(Red)

Play

(Blue)

Basic Functions

p. 127

p. 28

p. 25

p. 93

p. 26

p. 118

p. 43

On*/Off

Off/1/2*/3/4/5

On*/Off

Sets the date and time

Formats (initializes) the CF card

English* / Deutsch / Français / Nederlands /

Dansk / Suomi / Italiano / Norsk / Svenska /

Español / Chinese / Japanese

NTSC/PAL

Beep

Speaker Vol.

Power Save

Date/Time

Format

Language

Video System

Theme

Start-up Image

Start-up Sound

Shutter Sound

Operation Sound

Selftimer Sound

Menu Item

Reference

Page

Available Settings

/ /

Set up

(Yellow)

My Camera

(Blue)

* Default setting. Default video system setting varies between regions.

• Some menu items are not available in certain shooting modes.

• In the My Camera menu, you can connect to a computer and download

files to customize the

and items. See the Software Starter Guide

for details.

• The default ISO speed varies with the shooting mode.

• With the exception of the [Date /Time], [Language] and [Video System]

settings, all the other menu settings and changes made with the camera

buttons can be reset to the default values in a single operation (p. 132)

The start-up image and sound, shutter sound, operation sound and

selftimer sound are collectively called the My Camera Settings. You can

select between three options for the start-up image and the various

sounds.

Example: Start-up Image

The camera comes with preset images for the option (science

fiction theme) and the

option (bird theme).

Customizing the Camera

(My Camera Settings)

Customizing the Camera (My Camera Settings)

Changing My Camera Settings

• Use the or button to select the

(My Camera) menu.

• Use the

or button to select

(Theme), , , , or .

• Use the

or button to select

between the

, , and

options.

• The display will return to the Rec. or

Play menu.

• If you select (Theme) in Step 1, you can select a

consistent theme for each of the My Camera Settings.

• If the Beep option in the

(Set up) menu is set to On, the

beep sounds even if each sound item is individually set to

[Off] in the My Camera menu (p. 129).

Customizing the Camera (My Camera Settings)

An example of this function is to record “Say Cheese” as a selftimer

sound so that the camera will replay this sound 2 seconds before the

photo is taken. You can customize your camera by creating new My

Camera Settings and adding them to it.

• See the Software Starter Guide and the ZoomBrowser EX

Software User Guide or ImageBrowser Software User

Guide* (both in PDF format) on the supplied Solution Disk

for more information on creating and adding to the My

Camera Settings files.

* (May not be supplied with the camera in some regions.)

Customizing My Camera Settings

You can customize items and in the My Camera menu using

your computer and the bundled software.

File Formats for the My Camera Settings

Start-up Image

• Recording Format: JPEG (Baseline JPEG)

• Sampling Rate: 4:2:0 or 4:2:2

• Image Size: 320 x 240 pixels

• File Size: 20 Kb or less

Sounds

• Recording Format: WAVE (monophonic)

• Standardizing Bit: 8 bit

• Sampling Frequency: 11.025 kHz or 8.000 kHz

• Running Time:

11.025 kHz

1.0 sec. or less

0.3 sec. or less

2.0 sec. or less

8.000 kHz

1.3 sec. or less

0.4 sec. or less

2.0 sec. or less

Start-up Sound

Shutter Sound

Operation Sound

Selftimer Sound

• No file format other than those described above can be used with this

camera.

Shooting

Selecting a Shooting Mode

The camera features the following shooting modes.

Auto

Most settings are automatically selected by

the camera.

Manual

The exposure compensation, white balance

and other settings can be manually selected.

Stitch Assist

Images are shot in overlapping series to

create single panoramic images.

Movie Shoots movie clips.

• The settings selected in each shooting mode are saved when

switching between shooting modes. Some settings are also saved

when the power is turned off (p. 40).

• Select a shooting mode.

In the descriptions of the shooting functions that follow, the icons

beside the titles indicate the applicable shooting modes. Before you

proceed with Step 1 in each case, set the mode dial to one of the

shooting modes indicated by the icons in the title.

Shooting

Reviewing an Image Right after Shooting

Right after a shot is taken, the image appears in the LCD monitor for 2

seconds even if you release the shutter button regardless of whether the LCD

monitor is on or off. You can also review it with the following procedures.

• By keeping the shutter button pressed after a shot.

• By pressing the

button while the image is displayed on the LCD

monitor. Press the shutter button halfway to stop displaying it.

• You can do the following while the image is displayed.

- Check the image brightness in the histogram (p. 32).

- Erase the image (p. 91).

Changing the Review Duration

The default review time is 2 seconds. The review function can be set to

Off or changed to 10 seconds.

• See

Selecting Menus and Settings

(p. 37).

• Use the

or button to select [Off],

[2 sec.] or [10 sec.]

• With the Off option, the image will not

automatically display. However, if you

keep the shutter button fully pressed

after a shot, the image will display.

• With the 2 sec. or 10 sec. options, the

image automatically displays for the set

duration even if the shutter button is

released.

• You can display the image longer than

the 2- or 10-second duration by

keeping the shutter button depressed

or by pressing the

button while the

image is displayed.

• Another picture can be taken even

while the last is displayed.

• The display will return to the Rec. menu.

In the (Rec.) menu,

select .

Shooting

Changing Resolution/ Compression Settings

Still image resolution and compression settings and movie resolution

settings can be adjusted to suit your requirements. Resolution settings

get progressively higher ranging from the

(Small) and (Medium)

to the

(Large) settings. Use a high resolution setting to obtain the

best quality for printing, but select a lower one to print on small labels,

to send images by email or to fit more images on a CF card. Compres-

sion settings yield progressively higher image quality as one switches

from the

(Normal) and (Fine) settings to the (Superfine)

settings. Use the

(Superfine) setting to get higher quality images, or

the

(Normal) setting to get more images on a CF card. The (Fine)

setting provides sufficient quality for most purposes.

Still Image Resolution

(Large) 1600 x 1200 pixels

(Medium) 1024 x 768 pixels

(Small) 640 x 480 pixels

Compression

Superfine

Fine

Normal

Movies Resolution

640 x 480 pixels

320 x 240 pixels

160 x 120 pixels

The Following resolutions are available for movies.

Shooting

In the (Rec.) menu,

select or .

• See Selecting Menus and Settings (p. 37).

• Use the

or button to select an

option.

Resolution (Still Images)

Select

, or .

Resolution (Movies)

Select

, or .

Compression

Select

, or .

• The display will return to the Rec.

menu.

• See Functions Available in Each Shooting Mode (p. 76).

• See Approximate Image File Sizes (p. 147).

• See CF Cards and Estimated Capacities (p. 147).

Shooting

Using the Flash

Auto The flash fires automatically as required by the light level.

Red-Eye

The red-eye reduction lamp fires with each shot,

Reduction

automatically adjusting the intensity to suit lighting

Auto

levels.

On A flash fires with every shot.

Off A flash will not fire.

Slow-Synchro

The flash timing is adjusted to slow shutter speeds. This

reduces the chance that the background will be dark

when shots are taken at night or in rooms with artificial

lighting. The red-eye reduction lamp fires with each shot.

Use of a tripod is recommended.

● Setting available

▲ Can be selected for the first

image only.

• Press the button to cycle through the

flash settings.

●

▲

Shooting

• When you use flash photography at higher ISO speeds, the

chances of white streaks appearing in the image increase

the closer you approach to the subject.

• A slow shutter speed is selected in dark surroundings when

the flash is set to Off or Slow-Synchro. Be careful to avoid

camera blur under these conditions.

- Shooting in

Mode

Be careful to hold the camera still to avoid camera blur.

- Shooting in or

Mode

Fix the camera to a tripod to shoot in these modes since

the shutter speed will be slower than in the

mode. If

an image is dark in

mode, reshooting it in

mode will make it brighter.

• The flash can be fired when the upper indicator shines a

steady orange.

• The flash may take up to approximately 10 seconds to

charge. The recharging time will vary with such factors as

the shooting conditions and battery charge.

• The flash fires twice. The main flash follows a preparatory

pre-flash. The exposure reading obtained from the subject

with the pre-flash are used to set the optimal flash

intensity for the main flash, which is used to capture the

image.

Red-Eye Reduction

• Light reflecting back from eyes can make them appear red

when the flash is used in dark areas. Under these conditions,

use the red-eye reduction mode. For this mode to be

effective, the subject must be looking right at the red-eye

reduction lamp. Try asking them to look directly at the lamp.

Even better results can be obtained by shooting with the

lens set to a wide angle, increasing the lighting in indoor

settings or approaching closer to the subject.

• The shutter will not activate for approximately 1 second after

the red-eye reduction lamp fires in order to improve the

effect. If you wish a more immediate shutter response, set the

flash to

, or .

Shooting

Shooting Close-Ups/Infinity Shots

Macro

Use this mode to record subjects in the range of 16 to 76

cm (6.3 in. to 2.5 ft.) from the lens tip when at maximum

wide angle and in the range of 26 to 76 cm (10.2 in. to

2.5 ft.) when at the maximum telephoto setting.

Infinity

Use this mode to record landscapes and distant objects.

It can also be used for compositions combining both near

and distant objects.

Distance from

Image Area

Lens to Subject

Maximum Telephoto 26 cm (10.2 in.) 90 x 67 mm (3.5 x 2.6 in.)

Maximum Wide Angle 16 cm (6.3 in.) 163 x 121 mm (6.4 x 4.8 in.)

• Use the LCD monitor to compose close-ups in macro mode

since the parallax phenomenon may cause images

composed with the optical viewfinder to be off-center.

• The exposure may not be optimal when the flash is used in

macro mode in the range of 16 to 26 cm (6.3 to 10.2 in.).

• Image Area in Macro Mode

●

Setting available.

▲

Selectable for first image only.

• Display or .

●

▲

●

Shooting

Using the Digital Zoom

When the LCD monitor is on, images can be zoomed to approximately

3.8, 4.7, 6.0 or 7.5 times with the combined optical and digital zoom

functions.

• Turn the LCD monitor on.

• See Selecting Menus and Settings (p. 37).

• Use the

or button to select [On].

• The display will return to the Rec.

menu.

• Press the

button until the lens

reaches the maximum optical telephoto

setting and stops. Press it again to

activate the digital zoom and to

advance through the settings.

• Press the

button to zoom back out.

The combined

optical and

digital zoom

factor displays.

•The digital zoom is unavailable in some modes (p. 77).

•Images become coarser the more they are digitally zoomed.

In the (Rec.) menu,

select

Shooting

Shooting Continuously

In this mode, the camera shoots continuously at approximately 2.5

images per second* (Large/Fine, LCD monitor off) while the shutter

button is held down. Recording ceases when the shutter button is

released.

* This figure reflects standard shooting criteria established by Canon. Actual

figures may vary according to the subject and shooting conditions.

• Display .

• The interval between shots may lengthen slightly when the

camera’s built-in memory fills.

• If the flash is firing, the interval between shots will lengthen

to accommodate the flash’s charging requirements.

Shooting

Using the Self-timer

• Display .

• When the shutter button is pressed, the

self-timer will activate and the self-timer

lamp will flash.

Changing the Self-timer Countdown Time

• See Selecting Menus and Settings (p. 37).

• Use the

or button to select (10

sec.) or

(2 sec.)

• When

is selected, the self-timer

sounds and the flashing gets faster 2

seconds before the shutter activates.

• When

is selected, the self-timer

sounds at the same time as the shutter

button is pressed. The shutter activates

in 2 seconds.

• The display will return to the Rec.

menu.

• The selftimer sound can be changed with the (My

Camera) menu (p. 44).

In the (Rec.) menu,

select .

Shooting

Shooting in Stitch Assist Mode

Stitch Assist mode can be used to shoot images, which overlap, and

which can later be merged to create one panoramic image on a

computer.

• To merge the images on the computer, use PhotoStitch,

one of the supplied programs.

Framing a Subject

The PhotoStitch program detects the overlapping portions of adjoining

images and merges them. When shooting, try to include a distinctive

item (landmark) in the overlapping portions.

• Compose each frame so that it overlaps 30 - 50% of the adjoining

image. Try to keep the vertical misalignment to less than 10% of the

image height.

• Do not include moving items in the overlap.

The overlapping seams of

several adjacent images can

be joined into a single

panoramic image.

Shooting

• Do not try to stitch images that include both distant and close items.

These items may appear warped or doubled up in the merged image.

• Make the brightness in each image consistent. The final image will

appear unnatural if the contrast in brightness is too great.

• To shoot landscapes, swivel (pan) the camera around its own vertical

axis.

• To shoot close-ups, slide the camera over the subject, keeping it

parallel to the subject as you move it.

Shooting

Images can be shot in two sequences in Stitch Assist mode.

• Use the

or button to select the

sequence.

• Shoot the first frame in the sequence.

• The exposure and white balance are set

and locked with the first image.

Successive images use the same

settings.

Left to right

horizontally

Left to right horizontally

Right to left horizontally

Shooting

• Compose the second image so that it

overlaps a portion of the first and shoot.

• Use the

or button to check or

retake the recorded images.

• Minor discrepancies in the overlapping

portions can be corrected when the

images are stitched together.

• Repeat the procedure for additional

images. A sequence may contain up to

26 images.

• Press the

button to close Stitch

Assist mode.

• See the Functions Available in Each Shooting Mode (p. 76)

for the settings available in this mode.

• A custom white balance setting cannot be set in

mode.

To use a custom white balance setting, first set it in another

shooting mode.

• The settings for the first image are used to take subsequent

images in the sequence.

• It is not possible to display images on the TV monitor when

shooting in Stitch Assist mode.

Second Image

Third Image

Shooting

Shooting a Movie

Use the movie mode to shoot movie clips. Select a resolution in the

(Rec.) menu from the (640 x 480), (320 x 240) (Default) and

(160 x 120) options (p. 47).

• Press the shutter button fully to start

recording images and sounds.

• During shooting the recording time (in

seconds) and a red dot appear on the

LCD monitor.

• Press the shutter button again to stop

recording.

• The maximum length of a movie clip (at

approximately 20 frames / sec.) is

approximately 4 seconds (

), 10

seconds (

) or 30 seconds ( )

according to standard Canon testing

criteria. These times may vary with the

subject and shooting conditions.

Recording will automatically stop when

the maximum is reached or when the

CF card runs out of free capacity.

Shooting

• Be careful not to touch the microphone while recording.

• The AE, AF, white balance and zoom settings remained fixed

for subsequent frames at the values selected for the first frame.

• After a clip is shot, the upper indicator will flash green while

the clip is being written to the CF card. You cannot shoot

again until the flashing stops.

• See the Functions Available in Each Shooting Mode (p. 76)

for the settings available in this mode.

• Sound is recorded monaurally.

• The shutter sound will not sound when you fully press the

shutter button to record a movie clip.

• QuickTime 3.0 or a higher is required to replay movie files

(AVI / Motion JPEG ) on a computer. QuickTime 5.0 is

included on the Canon Digital Camera Solution Disk.

Shooting

Locking the Focus (AF Lock)

It may be difficult to focus on the following types of subject. Use the

focus lock in these situations.

• Subjects with extremely low contrast to the surroundings

• Subjects with extremely bright objects at the center of the composition

• Subjects that are moving quickly

• Subjects through glass

Try to shoot as close to the glass as possible to reduce the chances

of light reflecting back off the glass.

Shooting with the Focus Lock

Method 1

1. Aim the camera so that an object at the same focal distance as the

main subject is centered in the AF frame in the viewfinder or LCD

monitor.

2. Press the shutter button halfway and wait until two beeps sound.

3. Re-aim the camera to compose the shot as desired and press the

shutter button all the way.

Method 2

• Turn the LCD monitor on.

• Aim the camera so that an object at the

same focal distance as the main subject

is centered in the AF frame.

• Press and hold the shutter button

halfway until two beeps sound.

Without releasing your finger, press the

/ button.

• The

icon will display and the lower

indicator will light yellow.

Shooting

• Re-aim the camera to compose the shot

as desired and press the shutter button

all the way.

• Release the focus lock by pressing

either the

/ , , or zoom

buttons.

• Turning the mode dial also releases the

focus lock.

• Method 2 is convenient because you can let go of the

shutter button to recompose the image. Moreover, the

focus remains locked after the picture is taken, allowing

you to capture a second image with the same focus.

Shooting

Locking the Exposure Setting (AE Lock)

You can set the exposure and focus separately. This is effective when

the contrast is too strong between the subject and background or

when a subject is backlit.

• You must set the flash to . The AE lock cannot be set if

the flash fires.

• Turn on the LCD monitor.

• Focus the camera on the subject on

which you wish to lock the exposure

setting.

• Press the shutter button halfway and

wait until two beeps sound.

• Keep the shutter button pressed

halfway and press the

button.

•The

icon will display.

• Re-aim the camera to compose the shot.

• To release the AE lock, press the

button.

• The AE lock may release if you press any button other than

the

button.

Shooting

Locking the Flash Exposure Setting (FE Lock)

You can adjust and lock the flash output to suit a specific portion of

the subject.

• Turn on the LCD monitor.

• Set the flash to

and focus on the

part of the subject on which you wish

to lock the flash exposure setting.

• Press the shutter button halfway and

wait until two beeps sound.

• Keep the shutter button pressed

halfway and press the

button.

• The

icon will display.

• The flash will fire a pre-flash and lock

the flash exposure to the required

intensity to illuminate the subject.

• Re-aim the camera to compose the shot

and press the shutter button all the

way.

• To release the FE lock, press the

button.

• The FE lock may release if you press any button other than

the

button.

Shooting

• See Selecting Menus and Settings (p. 37).

• Use the

or button to select [On] or

[Off].

• A shot can be taken immediately after.

• The display will return to the Rec. menu.

The camera focuses using the AF frame that it selects to suit

the shooting conditions.

The camera focuses using the center AF frame. This is

convenient for focusing on a specific part of a subject with

greater certainty.

Off

• The symbol represents the AF frames as they appear in the LCD monitor.

Switching between Autofocus Modes

Although the autofocus function is preset to the AiAF setting, you can

switch modes to one that uses a fixed AF frame at the center of the field.

The AF frames will appear in the LCD monitor if it is turned on (p. 31).

In the (Rec.) menu,

select .

Shooting

Appropriate for standard shooting conditions,

including backlit scenes. The camera divides images

into several zones for light metering. It evaluates the

complex lighting conditions, such as the position of the

subject, the brightness, the direct light, and the

backlighting, and adjusts the settings to the correct

exposure for the main subject.

Meters the area within the spot AE point at the center

of the LCD monitor. Use this mode when the subject is

backlit or surrounded by strong light.

Switching between Light Metering Modes

You can switch between metering modes to shoot.

Evaluative

Light

Metering

Spot AE

Point

• Display or .

Shooting

Adjusting the Exposure Compensation

Adjust the exposure compensation setting to avoid making the subject

too dark when it is backlit or shot against a bright background or to

avoid making lights appear too bright in night shots.

• Use the

or button to adjust the

exposure compensation.

• The settings can be adjusted in 1/3

steps in the range of -2EV to +2EV.

• You can confirm the effect of the

exposure compensation setting in the

LCD monitor image when the LCD

monitor is on.

• A shot can be taken immediately after.

The menu will reappear after the shot,

allowing you to further adjust the

setting.

• Reset the exposure compensation by

returning the setting to 0.

Shooting

Shooting in Long Shutter Mode

You can set the shutter speed to a slow setting to make dark subjects

appear brighter.

• See Selecting Menus and Settings (p. 37).

• Use the

or button to select [On].

• The display will return to the Rec. menu.

• Use the

or button to select the

long shutter menu and the

button to select a shutter speed.

• A shot can be taken immediately after.

The menu will reappear after the shot,

allowing you to further adjust the

setting.

• While the menu is displayed, press the

button to release the long shutter

mode and finish the procedure.

In the (Rec.) menu,

select .

Long Shutter Menu

Shooting

• The nature of CCD image sensors is such that noise in the

recorded image increases at long shutter speeds. This

camera, however, applies special processing to images shot

at shutter speeds slower than 1.3 seconds to eliminate the

noise, thereby producing high-quality images.

Nevertheless, a certain amount of processing time may be

required before the next image can be shot.

• Use the LCD monitor to confirm that the image was

recorded at the desired brightness.

• Use of the flash may result in an over-exposed image. If

that occurs, shoot with the flash set to

• The following are unavailable:

- Exposure Compensation

- Light Metering

- AE Lock

- ISO speed [AUTO]

• Available Shutter Speeds

The following shutter speeds (in seconds) are available.

1, 1.3, 1.6, 2, 2.5, 3.2, 4, 5, 6, 8, 10, 13, 15

Shooting

• Press the

button repeatedly until the

White Balance Settings menu displays.

• Use the

or button to select a

setting. (See the next page for

• You can confirm the effect of the

setting in the LCD monitor image when

the LCD monitor is on.

• A shot can be taken immediately after.

The menu will reappear after the shot,

allowing you to further adjust the

setting.

• This setting cannot be adjusted when the

(Sepia) or

(B/W) photo effects are selected.

Setting the White Balance

Setting the white balance to match the dominant light source when

shooting will adjust the image coloring to the correct settings for that

type of light. Set the white balance mode to a natural or artificial light

setting according to the circumstances.

Auto The camera sets the white balance automatically

according to shooting conditions.

Daylight For recording outdoors on a bright day.

Cloudy For recording under overcast, shady or twilight skies.

Tungsten For recording under tungsten and bulb-type 3-

wavelength fluorescent lighting.

Fluorescent For recording under warm-white, cool-white or warm-

white (3-wavelength) fluorescent lighting.

Fluorescent H For recording under daylight fluorescent, or daylight

fluorescent-type 3-wavelength fluorescent lighting.

Custom For setting a custom value with a white sheet of paper, etc.,

to obtain the optimal white balance for the conditions.

Shooting

Setting a Custom White Balance

You can set a custom white balance to obtain the optimal setting for

the shooting conditions by having the camera evaluate an object, such

as a piece of white paper or cloth, or a photo-quality gray card that you

wish to establish as the standard white color.

• Press the

button repeatedly until

the White Balance Settings menu

displays.

• Use the

or button to select

• Aim the camera at the white paper or

cloth, or gray card and press the

button.

• Aim the camera so that the white paper

or cloth, or gray card completely fills

the frame on the LCD monitor or the

entire viewfinder before pressing the

button. The camera reads the white

balance data when you press the

button.

• A shot can be taken immediately after.

The menu will reappear after the shot,

allowing you to further adjust the

setting.

Shooting

• You are recommended to set the shooting mode to

and the exposure compensation setting to zero (±0) before

setting a custom white balance. The correct white balance

may not be obtained when the exposure setting is incorrect

(image appears completely black or white).

• It is also advisable to use the LCD monitor to compose the

shot and to zoom in to the maximum telephoto setting.

• Since the white balance data cannot be read in

mode,

preset the white balance in another shooting mode first

before selecting the

mode.

• If the flash fires when setting a custom white balance with

the flash set to

or , make sure that you also use the

flash when you go to shoot. The correct white balance

cannot be obtained unless the flash is used consistently. To

ensure consistency, set the flash to

or as appropriate.

Shooting

Changing the Photo Effect

You can shoot with different photo effects.

• Press the

button repeatedly until

the Photo Effect Setup menu displays.

• Use the

or button to select [Photo

Effect].

• You can confirm the effect of the

setting in the LCD monitor image when

the LCD monitor is on.

• A shot can be taken immediately after.

The menu will reappear after the shot,

allowing you to further adjust the

setting.

Photo Effect Off Records with no effect.

Vivid Emphasizes the contrast and color saturation to record

in bold color.

Neutral Tones down the contrast and color saturation to

record neutral hues.

Low Sharpening Records subjects with softened outlines.

Sepia Records in sepia tones.

B/W Records in black and white.

Shooting

Adjusting the ISO Speed

Adjust the ISO speed when you wish to shoot in a dark area or use a

fast shutter speed.

• See Selecting Menus and Settings (p. 37).

• Use the

or button to select a

setting.

• The display will return to the Rec. menu.

• When [AUTO] is selected, the camera automatically adjusts

the ISO speed to a range of 50 to 150.

• Higher ISO speeds increase image noise. To take clean

images, use as low an ISO speed as possible.

In the (Rec.) menu,

select .

Shooting

Setting the Auto Rotate Function

The camera is equipped with an Intelligent Orientation sensor that

detects the orientation of an image shot with the camera on end and

automatically rotates it to the correct viewing orientation in the display.

You can set this function on/off.

• See Selecting Menus and Settings (p. 37).

• Use the

or button to select [On]

or [Off].

• The display will return to the Rec. menu.

• When the Auto Rotate function is set to

On and the LCD monitor is set to the

detailed display mode, the

icon

(normal),

icon (right end is down) or

icon (left end is down) will appear in

the upper right of the display.

• When the camera is held on end to shoot, the Intelligent

Orientation sensor judges the upper end to be “up” and the

lower end to be “down.” It then only uses the upper two of

the three AF frames (when the AiAF function is On) to raise the

accuracy of the focus, exposure and white balance metering.

The bottom AF frame disappears. This function operates

regardless of the On / Off status of the Auto Rotate function.

• This function may not operate correctly when the camera is

pointed straight up or down. Check that the arrow is pointing

in the right direction and if it is not, then set the Auto Rotate

function to Off.

• Even if the Auto Rotate function is set to on, the

orientation of images downloaded to a computer will

depend upon the software used to download the images.

In the (Rec.) menu,

select

Shooting

Resetting the File Number

You can select the way file numbers are assigned.

• See Selecting Menus and Settings (p. 37).

• Use the

or button to select [On]

or [Off].

• The display will return to the Rec. menu.

• Setting the [File No. Reset] to [Off] is useful for avoiding

file name duplication when images are downloaded to a

Computer

• About File Numbers

Images are assigned file numbers from 0001 to 9900 and

organized in folders generally containing up to 100 images.

Folders are assigned numbers from 100 to 998 (a folder

with 99 in the last two digits cannot be created). Since

images shot in the

or mode are always saved in the

same folder, some folders may contain 101 or more images.

In the (Rec.) menu,

select

The file number is reset to the start (100-0001) each time a new CF

card is inserted. New images recorded on CF cards with existing files

are assigned the next available number.

The file number of the last images to be shot is memorized so that

images recorded to a new CF card start from the next number.

Off

Shooting

Functions Available in Each Shooting Mode

The chart below is a reference for the settings available for various shooting

conditions. The settings selected in each shooting mode are saved after you

finish shooting, and when you switch between shooting modes.

p. 47

p. 49

p. 51

p. 60

p. 62

p. 63

p. 53

p. 54

p. 64

Reference

Page

Resolution

Compression

Flash

Macro Mode

Infinity Mode

Focus Lock

AE Lock

FE Lock

Shooting

Method

Autofocus Frame

Large

Medium

Small

Movie

Superfine

Fine

Normal

Auto

Red-Eye Reduction Auto

Off

Slow-Synchro

Single

Continuous

Selftimer

Function

Auto Manual Stitch

Assist

Movie

●

▲

Shooting

p. 35

p. 65

p. 52

p. 66

p. 67

p. 69

p. 72

p. 73

p. 74

Reference

Page

AF-assist Beam

Light Metering

Digital Zoom

Exposure Compensation

Long Shutter

White Balance

Photo Effect

ISO Speed

Auto Rotate

Function

Auto Manual Stitch

Assist

Movie

●

(2)

●

(1)

●

(1)

▲

(1)

▲

* Default setting.

● Setting available.

▲ Setting can only be selected for the first image.

■

(Shaded Area): Setting is memorized even when the camera power is

shut off.

• With the exception of the [Date / Time], [Language] and [Video System]

settings, all the other menu settings and changes made with the camera

buttons can be reset to the default values in a single operation. (p. 132)

(1)

The ISO speed is automatically set between the equivalent of 50 and 150.

(2)

The ISO speed cannot be set to [AUTO].

Viewing Images Individually (Single Image View)

• Turn the mode dial to the position.

• The last recorded image will appear in

the display (single image replay).

• Use the

button to move to the

previous image and the

button to

move to the next. Holding the button

down advances the images more

rapidly, but the images will not appear

as clearly.

Replaying

Magnifying Images

• Images can be magnified up to

approximately 10 times.

• Use the / / / buttons to

move around the image.

• Hold the

button down and press

the

button to cycle through each

setting, from approximately 2.5 times,

to approximately 5 and 10 times.

• Press the

button to reset the

magnify settings.

Approximate Location

of the Magnified Area

• Movie frames and index replayed image cannot be

magnified.

Replaying

Viewing Images in Sets of Nine (Index View)

• Up to nine images can be viewed at

once in index replay.

• Use the / / / buttons to

change the image selection.

• Press the

button to display the

selected image in single image replay.

Switching between Sets of Nine Images

• Successive sets of nine images can be

shown in the display.

• Use the

button to move to the

previous set and the

button to move

to the next.

• Hold the

button down and press

the

or button to jump to the first

or last set.

• Press the

button to return to

standard index replay.

Selected

Image

Movie

Replaying

Viewing Movies

Movie clips can be replayed with the following procedures.

• Movies cannot be played in the index replay mode.

• Use the or button to select a

movie.

• Images with an

icon are movies.

• The movie panel will display.

• Use the

or button to select

(Play).

• The movie images and sound will play.

• Use the

or button to adjust the

volume.

• When a movie is finished, it stops and

displays its last frame.

Replaying

Fast Forwarding/Rewinding

• Use the or button to select one of

the following.

Play

Previous Frame /Rewind

Next Frame /Fast Forward

First Frame

Last Frame

Return to Single Image View

• Please adjust the sound volume on the TV set when

viewing movie files on a TV (p. 118).

• You may experience frame dropping and audio breakup

when replaying a movie on a computer with insufficient

system resources.

• Movies shot with other cameras may not replay on this

camera. See the List of Messages (p. 133).

Pausing and Resuming Play

• Press the button to pause the movie.

Press it again to resume.

Replaying

Rotating Images in the Display

Images can be rotated clockwise 90º or 270 º in the display.

0º(Original) 90º 270º

• See Selecting Menus and Settings (p. 37).

• Cycle through the 90º/270º/0º

orientations with each press of the

button.

• Press the

button repeatedly until

the replay screen reappears to finish the

procedure.

• Movies cannot be rotated.

• When images are downloaded to a computer, the

orientation of images rotated by the camera will depend

upon the software used to download the images.

• Images taken vertically with the Auto Image Rotate (p. 74)

is set to [On] will automatically be rotated to the vertical

position when viewed on the camera’s LCD monitor.

In the (Play) menu,

select .

Replaying

Attaching Sound Memos to Images

In replay mode (including single image replay, index replay, magnified

replay and review of an image immediately after shooting), you can

attach a sound memo of up to 60 seconds to an image. The data is

saved in a WAVE format file.

• See Selecting Menus and Settings (p. 37).

• The Sound Memo panel will display.

• Use the

or button to select .

• The recording will start and the LCD

monitor will show the elapsed and the

remaining times. Speak toward the

camera’s microphone.

• Press the

button to stop recording.

Press the

button again to continue

recording.

• Additional memos can be added until

the total time adds up to 60 seconds

for any one image.

In the (Play) menu,

select .

Replaying

Playing/Deleting Sound Memos

• To play a sound memo, use the or

button to select .

• Select

to erase a sound memo.

• Images with sound memos display the

icon.

• The sound memo will play or be erased.

• Press the

button to stop a sound

memo when it is playing. Press the

button again to continue the playback.

• Use the

or button to adjust the

volume.

• You cannot attach sound memos to movies.

• If there is no space for recording on the CF card, the

message “CF card full” will appear and you will not be able

to continue recording.

• You cannot record or playback sound notes for images that

already have an incompatible sound file attached. If you

attempt to record to or play an image with the

icon, the

“Incompatible WAVE format” message will display.

• The playback volume of sound memos can also be adjusted

in the

(Set up) menu (p. 127).

Display the Sound Memo

panel (p. 84).

Replaying

Automating Playback (Slide Shows)

Starting a Slide Slow

A selection of images or all the images on a CF card can be displayed

one-by-one in an automated slide show.

Slide show image settings are based on DPOF standards (p. 94).

All Images Plays all images on the CF card in order.

Slide Show 1-3 Plays the images selected for each slide show in order.

• See Selecting Menus and Settings (p. 37).

• The Slide Show menu will display.

• Use the

or button to select

[Program] and the

or button to

select [All Images], [Show 1], [Show 2]

or [Show 3].

• Use the

or button to select

[Start].

• The slide show will start and automati-

cally stop at the end of the show.

• Press the

button repeatedly until

the replay screen reappears to finish the

procedure.

• Movies play for their entire recorded length regardless of

the time set in the slide show settings.

• The power save function does not activate during a slide

show (p. 28).

In the (Play) menu,

select

Replaying

Pausing /Resuming a Slide Show

• Press the

button to pause the slide

show. Press the

button again to

restart it.

Fast Forwarding/Rewinding a Slide Show

• Use the

or button to display the

previous or next image. Hold down the

button to advance through the images

more rapidly.

Stopping a Slide Show

• Press the button to stop the slide

show and redisplay the Slide Show

menu.

Selecting Images for Slide Shows

You can mark images for inclusion in slide shows 1-3. Up to 998

images may be marked per slide show. Images display in the order of

their selection.

• Use the

or button to select

[Program] and the

or button to

select [Show 1], [Show 2] or [Show 3].

• Use the

button and the or

button to choose [Select].

Display the Slide Show

menu (p. 86).

Replaying

• A checkmark will appear beside a show

already containing images.

• Use the

or button to move

between images and the

button to select or deselect them.

Selected images display a number

corresponding to their selection order.

• You can press the

button to switch

to the index mode (3 images) and use

the same procedures to select images.

• In index mode, you can deselect all

images by pressing the

button,

using the

or button to select

[Clear all], and pressing the

button

again.

• Press the

button repeatedly until

the replay screen reappears to finish the

procedure.

Selection Number

Replaying

Adjusting the Play Time and Repeat Settings

You can change the play time for all the images in a show and have the

show repeat continuously.

Play Time

Sets the duration that each image displays. Choose between

3-10 seconds, 15 seconds, 30 seconds and Manual.

Repeat

Sets whether the slide show stops when all the slides have

been displayed or continues until stopped.

• Use the or button to select [Set

up].

• Use the

or button to select

or and the or button to select

an option.

Select a play time.

Select [On] or [Off].

• Press the

button repeatedly until

the replay screen reappears to finish the

procedure.

Display the Slide Show

menu (p. 86).

• The display interval may vary slightly from the set time for

some images when played.

• Slide shows are easy to arrange on a computer with the

supplied software. See the Software Starter Guide.

Replaying

Protecting Images

You can protect important images from accidental erasure.

• See Selecting Menus and Settings (p. 37).

• Use the

or button to select an

image to protect.

• Press the

button to protect the

image. Press the

button again to

remove the protection.

• You can make the selection of images

easier by toggling between single

image replay and index replay with

either the

button.

• Press the

button repeatedly until

the replay screen reappears to finish the

procedure.

• Please note that formatting (initializing) a CF card erases all

data, including protected images.

In the (Play) menu,

select .

Protection Icon

Erasing

Erasing Single Images

• Please note that erased images cannot be recovered.

Exercise adequate caution before erasing a file.

• Protected images cannot be erased with this function.

• Use the or button to select an

image for deletion.

• Use the

or button to select [Erase].

• To exit instead of erasing, select

[Cancel].

Erasing

Erasing All Images

• Please note that erased images cannot be recovered.

Exercise adequate caution before erasing a file.

• Protected images cannot be erased with this function.

• See Selecting Menus and Settings (p. 37).

• Use the

or button to select [OK].

• To exit instead of erasing, select

[Cancel].

In the (Play) menu,

select

Erasing

Formatting CF Cards

New CF cards must be formatted with the following procedures

before use.

• Please note that formatting (initializing) a CF card erases all

data, including protected images and other file types.

• See Selecting Menus and Settings (p. 37).

• Use the

or button to select [OK].

• To exit instead of formatting, select

[Cancel].

• When the camera is malfunctioning, a corrupted CF card

might be the cause. Reformatting the CF card may solve

the problem.

• When a non-Canon brand CF card is malfunctioning,

reformatting it may solve the problem.

• CF cards formatted in other cameras, computers, or

peripheral devices may not operate correctly in this camera.

When that happens, reformat the CF card with this camera.

If formatting in the camera doesn’t work properly, turn the

camera off and re-insert the CF card. Then turn the camera

back on and format again.

In the (Play) menu,

select

Printing

About Printing

This camera supports direct printing. By connecting the camera to an

optional printer or Bubble Jet printer (sold separately) that supports the

camera’s direct print function, you can send the images from the CF

card directly to the printer using the camera buttons. In addition, you

can have prints made to specification by a photo developing service by

sending your CF card with the DPOF (Digital Print Order Format ) print

settings set in advance on your camera.

Please refer to the System Map supplied with your camera for direct

print function compatible printer information.

DPOF Print Settings

• Select the images you wish to print (p. 107)

▼

• Set the number of print copies (p. 108)

▼

• Set the print style (p. 111)

- Standard/Index

- Date: On/Off

- File Numbers: On/Off

DPOF Transfer Order

• Select the images to send by email (p. 116)

Software that supports DPOF transfer order

settings is required

CF Card

Digital Camera

Printing

BJ Printer with the

direct print function

Printer with the

direct print function

Setting Print Settings for Direct Printing

• Setting the Number of Print Copies (p. 103)

▼

• Setting the Print Style (p. 103)

- Standard/Multiple

(Direct Print Function Compatible Printer)

- Paper: Card #1/ Card #2/Card #3/ LTR/A4

(Direct Print Function Compatible BJ Printer)

- Bordered/Borderless

- Date: On/Off

▼

• Setting the Printing Area (p. 105)

Photo Developing

Service

Printing

Print Menu Settings

Use the Print menu to set print related settings. The following diagrams

illustrate how to use the Print menu.

DPOF Print Settings

Set the Mode Dial to

Direct Print Function

Set the Mode Dial to

Printing

Turn the menu On/Off

Selects items and settings

Sets items and setting.

Print Type (p. 111)

Date (p. 111)

File No. (p. 111)

Order Number of Copies (p. 108)

Set up

Reset (p. 113)

Style

Number of Copies (p. 103)

Printing Area (p. 105)

Image (p. 103)

Borders (p. 103)

Date (p. 103)

Printing

Connecting a Printer

You can make clear prints swiftly and easily when you connect the

camera to a direct print function compatible printer. You can also print

using DPOF print settings.

• You are recommended to use a household power source

rather than the battery pack to power the camera when it

is connected to a printer. If you do use a battery pack,

ensure that it is fully charged and monitor the battery

charge while printing.

• Please see the System Map supplied with your camera for the

list of direct print function compatible printers.

• Please see your printer’s user guide for information about

installing paper and ink cassettes/tanks.

Connecting to a Direct Print Function Compatible Printer

Your printer should come equipped with two direct interface cables. To

connect to this camera, please use the cable (DIF-100) that has the

symbol on its connector.

• Attach the power cable to the printer

and insert its plug into an electrical

outlet.

• You can also power the printer with a

rechargeable battery if it is so equipped.

Please see your printer’s user guide.

Shut the camera’s

power off (p. 27).

To an Electrical

Outlet

Printing

• Attach the direct interface cable to the

printer.

• Open the terminal cover on the camera

and insert the cable’s connector into

the camera’s DIGITAL terminal. Orient

the cable so that the connector’s

symbol faces the camera’s rear panel.

• Turn the mode dial to the

position

and power up the camera.

•

will display when the printer is

correctly connected.

Connecting to a Bubble Jet Printer

• Please read the user guide supplied with your BJ printer to

see if it is compatible with the camera’s direct print

function, and for instructions on connection cables and

general operations.

Direct Interface

Cable

The

symbol appears

on the connector.

This shows when

a direct print

compatible

printer is

connected.

Shut the camera’s

power off (p. 27).

100

Printing

• Attach the interface cable to the BJ

printer.

• Open the terminal cover on the camera

and insert the cable’s connector into

the camera’s DIGITAL terminal. Orient

the cable so that the word Canon on

the connector faces the camera’s front

panel.

• Turn on the camera’s power and set the

mode dial to the

position.

•

will display when the printer is

correctly connected.

This shows when

a BJ printer is

connected.

Interface Cable

DIF-B100

• Ensure that you grip the sides of the connector to remove

the cable from the camera’s DIGITAL terminal.

• The following cannot be conducted while the printer is

connected.

- Playing movies

- Setting the language with the

and the

button combination.

• When the printer is disconnected, the

or symbol will

disappear from the LCD monitor and the camera will revert

to the standard replay mode.

To the

BJ Printer

Printing

101

Printing

• The following illustrations show examples from a direct print function

compatible printer. Options for the Style category will differ slightly for

BJ printers.

Print images displayed in single image view or index view mode.

• Use the

or button to select the

images you wish to print.

• Specify the print copies, print style and

print area as required.

- Setting the Number of Print Copies

(p. 103)

- Setting the Print Style (p. 103)

- Setting the Printing area (p. 105)

• Use the

/ / / buttons to

select [Print].

• To quit the procedure instead, select

[Cancel].

• Press the

button to start printing.

• The replay screen will reappear when

printing is successfully concluded.

• Movies cannot be printed.

102

Printing

• Canceling Printing

Press the

button to stop printing. A confirmation

message will display. Use the

or button to select [OK]

and press the

button.

• Direct Print Function Compatible Printers

A print in progress cannot be stopped. The printer will

stop after the current print is complete and the camera

will display its replay screen at that point.

• BJ Printers

The printer will stop printing the current image and

eject the paper.

• Printing Errors

An error message will display if an error occurs while

printing (pp. 135, 136). Use the

or button to select

[Stop] or [Resume] and press the

button. (With a BJ

printer, the print will automatically restart if the error is

resolved.)

• Direct Print Function Compatible Printers

The Resume option may not appear with some types of

error. In that case, select Stop.

• BJ Printers

The type of error will determine whether the Continue

or Stop options appear. An error number will appear on

the BJ printer’s operation panel. See the printer’s user

guide for the recommended course of action for each

error type.

Printing

103

Setting the Print Settings (Direct Print Function)

Setting the Number of Copies

• Use the or button to select

[Copies] and the

or button to

select the number. Up to 99 copies may

be specified.

Setting the Print Style

You can select from among the following print styles.

Direct Print Function Compatible Printer

Standard Prints one image per page.

Image

Multiple*

Prints eight copies of the same image

on one page.

Borders

Borderless Prints right to the edges of the paper.

Bordered Prints with a border.

Date Prints the image’s creation date.

BJ Printer

Paper

Select a paper size from the following:

Card #1, Card #2, Card #3, LTR and

A4. See the printer’s user guide for its

media specifications.

Borders

Borderless Prints right to the edges of the paper.

Bordered Prints with a border.

Date Prints the image’s creation date.

* This option is only available for printing on card-size paper.

104

Printing

• Use the or button to select [Style].

• Use the

or button to select ,

, , or and the or button

to select an option.

(Image Settings)

(Direct Print Function Compatible Printer)

Select [Standard] or [Multiple].

(Paper)

(BJ Printer)

Select [Card #1], [Card #2], [Card #3],

[LTR] or [A4].

(Borders)

Select [Borderless] or [Bordered].

(Date)

Select [On] or [Off].

Current print style selection

Printing

105

• Press the button to finish the

procedure.

• Practically all of the image area is

printed on Bordered prints.

• With borderless or multiple prints, the

center portion of the image (as shown

in the LCD monitor) is slightly enlarged

to fill the space. Consequently, the top,

bottom and sides of the image may be

cropped slightly.

• The date settings are overridden by the DPOF print settings

if you are using them to print (p. 111).

• If you are using a direct print function compatible printer,

the date and borders settings cannot be selected when the

Multiple option is selected. (Images are printed without a

date or border.)

Setting the Printing Area

You can select between the following three options to set the printing

area for an image.

• Set the print style (image, borders, date, etc.) before setting

the printing area (p. 103).

• The printing area can be set when the [Borderless] and

[Multiple] options have been selected.

• The printing area may shift right or left if the paper size is set

to L or the image setting in the print style is set to Multiple.

Top Prints the upper portion of the image.

Center Prints the center portion of the image.

Bottom Prints the lower portion of the image.

106

Printing

• Use the or button to select

[Printing area] and the

or button

to select

, or .

• The printing area setting only applies to one image.

• The printing area setting is canceled with the following

operations:

- When the image is printed,

- When a print area is set for another image,

- When the print mode is closed (camera power shut off,

mode dial is turned, cancel is selected without printing

after the printing area is set, or the direct interface

cable is detached).

Printing

107

Setting the DPOF Print Settings

You can select images on a CF card for printing and specify the number

of print copies in advance using the camera. This is extremely

convenient for sending the images to a photo developing service or for

printing on a direct print function compatible printer or a direct print

function compatible BJ printer.

Selecting Images for Printing

There are two ways to select images.

• Singly

• All images on a CF card (the number of print copies is set to one

per image)

• See Print Menu Settings (p. 96).

• Use the

or button to select [Print

Order].

Display the Print Order

Menu.

108

Printing

Single Images

• As shown below, selection methods

differ according to the options chosen

for the

(Print Type) settings (p. 111).

(Standard)/ (Both)

• Use the

or button to select an

image and the

or button to

select the number of print copies (up to

maximum of 99).

(Index)

• Use the

or button to move to an

image and the

or button to

select or deselect it. A checkmark

displays on selected images.

• You can use the same procedures to

select images in index view (3 images).

Press the

button to switch between

single image view and index view.

• Press the

button repeatedly until

the replay screen reappears to complete

the procedure.

Number of Print Copies

Selected for

an Index Print

Printing

109

All the Images on a CF Card

• Switch to index view (3 images).

• Use the

or button to select

[Mark all].

• Selecting [Mark all] selects all of the

card’s images.

• Press the

button to set the number

of print copies to 1 for each image.

• When the print type is set to Standard

or Both, the number of print copies can

be set individually for each image.

When Index is selected, the print

settings can be deleted (p. 108).

• Press the

button repeatedly until

the replay screen reappears to complete

the procedure.

• The symbol will display on images that have had print

settings set by other DPOF-compliant cameras. These

settings will be overwritten by those set by your camera.

• The output of some printers or photo developing services

may not reflect the specified print settings.

• Print settings cannot be set for movie images.

110

Printing

• Images are printed in order from oldest to newest by the

shooting date.

• A maximum of 998 images can be selected per CF card.

• When [Both] is selected, the number of print copies can be

set, but it applies to Standard prints only. The Index setting

only produces one print copy.

• Print settings can also be assigned to images with the

bundled software programs on a computer.

Printing

111

Setting the Print Style

The following print settings can be selected.

• See Print Menu Settings (p. 96).

• Use the

or button to select [Set up].

Standard Prints one image per page.

Print Type

Index

Prints the selected images together at a

reduced size in an index format.

Both

Prints the images in both the standard and

index formats.

Date Adds the date to the print.

File No. Adds the file number to the print.

Display the Print Order

Menu.

112

Printing

• Use the or button to select ,

or , and the or button to

select an option.

(Print Type)

• Select [Standard], [Index] or [Both].

(Date)

• Select [On] or [Off].

(File No.)

• Select [On] or [Off].

• Press the

button repeatedly until

the replay screen reappears to complete

the procedure.

• When the print type is set to Index, only one or the other

of the [Date] and [File No.] options can be set to [On] at the

same time.

• The date prints as the date and time in the format specified

in the Set Date /Time menu (p. 25).

Printing

113

Resetting the Print Settings

The print settings can all be removed at once. The print type resets to

Standard and the Date and File No. options to Off.

• See “Print Menu Settings” (p. 96).

• Use the

or button to select [Reset].

• Use the

or button to select [OK].

• To exit without resetting, select [Cancel].

Display the Print Order

Menu.

114

Printing

Printing with DPOF Print Settings

The DPOF print settings can be used to print on a direct print function

compatible printer or a direct print function compatible BJ printer.

• See Print Menu Settings (p. 96).

• Use the

/ / / button to select

[Print].

• Set the print style as required (p. 111).

• The print style cannot be set for images

that have had the print type set to

Index in the DPOF print settings. (You

can also select the type of paper when

printing with a BJ printer.)

• Use the

/ / / buttons to

select [OK].

• Press the

button to start printing.

• The replay screen will reappear when

printing is successfully concluded.

Display the Print Order

Menu.

116

Image Transmission Settings

(DPOF Transfer Order)

You can use the camera to specify settings for images that you wish to

send by email. Please use the software supplied with the camera to

actually transfer the images to an email program. The settings used on

the camera comply with the Digital Print Order Format (DPOF) standards.

• The symbol will display on images that have had print

settings set by other DPOF-compliant cameras. These

settings will be overwritten by those set by your camera.

Selecting Images for Transferring

• See Selecting Menus and Settings (p. 37).

• The Transfer Order menu will display.

• Use the

or button to select [Order].

• Pressing [Reset] cancels the transfer

settings for all images on the CF card.

In the (Play) menu,

select .

Image Transmission Settings (DPOF Transfer Order)

117

• Use the or button to move to an

image and the

or button to

select or deselect it. A checkmark

displays on selected images.

• You can press the

button to switch

to the index mode (3 images) and use

the same procedures to select images.

• While in index view, you can select all

of the images by pressing the

button, using the or button to

select [Mark all] and pressing the

button again.

• Press the

button to complete the

transfer settings and redisplay the

Transfer Order menu.

• Images are transferred in order from oldest to newest by

the shooting date.

• A maximum of 998 images can be selected per CF card.

• Transfer settings can also be assigned to images with the

supplied software programs on a computer.

Selected for Transfer

118

Shooting / Replaying with a TV Monitor

You can use a video-compatible television as a monitor to shoot or

replay images when it is connected to the camera with the supplied AV

Cable AVC-DC100. You must shut the TV and camera power off

before you attach or detach the AV cable.

• After you have attached the AV cable at both ends, turn on the TV

and set its TV / Video switch to Video.

• Turn the camera power on and set the mode dial to

or . You

can shoot or replay images using the normal procedures.

• If the images are not appearing on the TV when shooting, press the

button.

• A TV monitor cannot be used in

mode.

• No image will appear on the LCD monitor when the

camera is connected to a TV.

• If the TV is a stereo model, you can plug the audio plug

into either the left or right Audio In jack. Please refer to

the TV’s manual for details.

• The video output signal can be switched (NTSC or PAL) to

accommodate different regional standards. The default

setting varies between regions.

NTSC: Japan, U.S.A., Canada, Taiwan, etc.

PAL: Europe, Asia (excluding Taiwan), Oceania, etc.

If the video system is set incorrectly, the camera output may

not display properly.

Yellow

Black

119

Downloading Images to a Computer

Download images taken with the camera to a computer in one of the

following ways:

• Directly from the CF card.

• Connecting the camera to a computer with the USB cable.

After installing the supplied software, download images

automatically by simply connecting the camera to a computer with

the supplied USB cable.

- For information about system requirements and for more details

about how to download images, refer to the Software Starter Guide.

Downloading Directly from a CF Card

Images can be loaded directly from a CF card if you have a slot-

equipped notebook computer, a PC card reader or a CF card reader.

Eject the CF card from the camera and insert it into a CF card

reader connected to the computer.

If you are using a PC card reader, first insert the CF card into a PC

card adapter (optional), and then insert the PC card adapter into

the computer’s PC card reader.

120

Downloading Images to a Computer

Double-click the icon of the drive containing the CF card.

Copy the CF card’s images to the desired folder on the hard disk.

The images are contained in the [XXXCANON] folder, which is a

subfolder of the [DCIM] folder on the CF card. The XXX represents

a number from 100 to 998.

• Some computers or memory card readers require the

power to be off when the CF card is inserted into the slot.

Since this requirement varies between products, please

consult the manual for your equipment.

Connecting the Camera to a Computer with a USB Cable

Use the supplied USB cable to connect the computer’s USB port

to the DIGITAL Terminal on the camera.

• You do not need to shut off the camera or computer to

attach or detach USB interface cables.

• Please refer to your computer’s manual for the locations of

the computer’s USB ports.

USB Port

USB Cable

1. Slip a fingernail

under the upper

edge of the terminal

cover to open it.

2. Insert the connector

until it clicks.

DIGITAL Terminal

USB Cable

Downloading Images to a Computer

121

Turn the camera’s mode dial to the position.

The LCD monitor will turn on in replay mode and then blank out

when the connection to the computer is complete.

• Ensure that you grip the

sides of the connector to

remove the cable from the

camera’s DIGITAL terminal.

• It is recommended to power the camera from a household

power outlet with the optional AC Adapter Kit ACK500

when connected to a computer.

• If the USB cable is detached while the camera power is on,

the camera will power down.

• If no controls have been accessed for approximately 5

minutes, a warning message displays on the computer

screen. The camera powers down approximately 1 minute

later if no control is accessed.

Please refer to the Software Starter Guide for the subsequent

procedures.

122

Lists of Menu Options and Messages

The following charts list the various menu contents. See “Selecting

Menus and Settings” (p. 37) to learn how to select a setting.

Rec. Menu

Item/Menu Screen

Options

Reference

Page

Sets the relative compression ratio used to

record images to CF cards.

• Superfine

• Fine*

• Normal

Sets the sensitivity at which images are

recorded.

• 50*

• 100

• 200

• 400

• AUTO

Sets the number of pixels used to record

movies to CF cards.

• 640 x 480 pixels

• 320 x 240 pixels*

• 160 x 120 pixels

Sets the number of pixels used to record

images to CF cards.

• (Large)*

1600 x 1200 pixels

• (Medium)

1024 x 768 pixels

• (Small)

640 x 480 pixels

* Default setting

p. 47

p. 73

Resolution (Stills)

Resolution (Movies)

Compression

ISO Speed

p. 47

List of Menu Options and Messages

123

Item/Menu Screen Options

Reference

Page

Sets the whether or not the optical zoom is

supplemented by digital processing.

• On

• Off*

Digital Zoom

AiAF

Self-timer

Review

AF-assist Beam

Sets whether or not the camera

automatically selects one of three AF frames

or a fixed center AF frame.

• On*

• Off

Sets the duration before the self-timer

releases the shutter.

• 10 seconds*

• 2 seconds

Sets the duration images display on the LCD

monitor after the shutter button releases.

• Off

• 2 seconds*

• 10 seconds

Sets the AF-assist Beam to on or off.

• On*

• Off

p. 35

p. 46

p. 54

p. 52

p. 64

* Default setting

124

List of Menu Options and Messages

Item/Menu Screen Options

Reference

Page

Sets how file numbers are assigned to

images when new CF cards are inserted.

• On

• Off*

Long Shutter

File No. Reset

Auto Rotate

Sets whether or not images shot with the

camera on end are automatically rotated in

the display.

• On*

• Off

Sets the shutter speed to slow settings.

• On

• Off*

p. 75

p. 74

p. 67

* Default setting

List of Menu Options and Messages

125

Item/Menu Screen Options

Reference

Page

Sound Memo

Protect

Rotate

p. 90

p. 83

p. 84

Erase all

Slide Show

Prevents images from accidental erasure.

Rotates images clockwise 90º or 270 º in the

display.

Adds sound memo to images.

Deletes all images from a CF card (except for

protected images).

Plays images in automated slide shows.

p. 92

p. 86

Play Menu

126

List of Menu Options and Messages

Item/Menu Screen Options

Reference

Page

Print Order

Transfer Order

p. 107

p. 116

Selects images and the number of print

copies for output to a direct print compatible

printer or a photo developing service.

Selects the images that will be transferred to

your email software.

List of Menu Options and Messages

127

Set up Menu

Adjusts the audio volume for the start-up

sound, shutter sound, operation sound

and selftimer sound, movies and sound

annotations.

• (Off)

• (1)

• (2)*

• (3)

• (4)

• (5)

Item/Menu Screen Options

Reference

Page

p. 34

Beep

Speaker Vol.

Sets whether or not a beep sounds when

the shutter button is pressed or a menu

operation is performed.*

• On*

• Off

A beep still sounds to warn of errors even

when Off is selected.

Sets whether or not the camera

automatically powers down after a set

period of time elapses without something

being pressed.

• On*

• Off

Sets the date and time and the date format.

p. 81

p. 28

p. 25

Power Save

Date /Time

See also how this item and each sound setting in the (My Camera)

menu interact (p. 129).

* Default setting

128

List of Menu Options and Messages

Item/Menu Screen Options

Reference

Page

Sets the video output signal standard.

• NTSC

• PAL

Format

p. 93

p. 118

Formats (initializes) CF cards.

Sets the language used in menus and

messages on the LCD monitor.

• English* • Italiano

• Deutsch • Norsk

• Français • Svenska

• Nederlands • Español

• Dansk • Chinese

• Suomi • Japanese

You can also change the language in replay

mode by holding the SET button and

pressing the MENU button.

Language

Video System

p. 26

* Default setting

List of Menu Options and Messages

129

My Camera Menu

You can select the start-up image and sound, shutter sound, operation

sound and selftimer sound used on this camera. These are called the

My Camera Settings. You can also customize the

and options

for each item using the supplied software. See the Software Starter

Guide for details.

Selects a common theme for each My

Camera Settings item.*

• (Off)

•*

•

Sets the image displayed when the camera

power is turned on.

• (Off)

•*

•

Sets the sound emitted when the camera

power is turned on.*

• (Off)

•*

•

Item/Menu Screen Options

Reference

Page

Start-up Image

Start-up Sound

Theme

p. 43

See also how this item and the beep interact (p. 131).

* Default setting

130

List of Menu Options and Messages

Sets the sound emitted when any button

other than the shutter button is pressed.*

• (Off)

•*

•

Sets the sound emitted 2 seconds before the

shutter releases in self-timer mode.*

• (Off)

•*

•

Item/Menu Screen Options

Reference

Page

Operation Sound

Selftimer Sound

Shutter Sound

Sets the sound emitted when the shutter

button is pressed. There is no shutter sound

for movies.*

• (Off)

•*

•

p. 43

See also how this item and the beep interact (p. 131).

* Default setting

List of Menu Options and Messages

131

How the Beep in the (Set up) Menu and Sounds

in the

(My Camera) Menu Interact

To turn off each sound, such as the start-up sound, shutter sound,

operation sound and selftimer sound, the beep must first be set to [Off]

in the

(Set up) menu and then each sound item must be set

individually to [Off]. If the beep is set to On, a beep will sound for each

item even if it is set to Off in the

(My Camera) menu.

The table below shows the relationship.

Beep Setting in the (Set up) Menu

Sounds in the (My Camera) Menu

(Start-up, shutter, operation, selftimer)

●

Beep

●

OffOn

●

Sound emitted

Sound not emitted

132

List of Menu Options and Messages

Resetting All Settings to Their Default Values

You can reset all the menu and button settings to the default settings

in one operation except for the [Date/Time], [Language] and [Video

System] settings.

• Press the On / Off Buton until the green

power lamp lights.

• Set the mode dial to any position.

• Press and hold the

button for

more than 5 seconds.

• Use the

or button to select [OK].

• To exit without resetting, select [Cancel].

• The following settings will not return to the default settings.

- White balance data recorded with the manual white

balance function (p. 70)

- Customized My Camera Settings (p. 42)

List of Menu Options and Messages

133

List of Messages

The following messages may appear on the LCD monitor while

shooting or replaying.

Busy... Image is being recorded to, or read

from, CF card

No CF card You attempted to shoot or replay

images without a CF card installed.

Cannot record! You attempted to shoot an image

without a CF card installed.

CF card error! CF card has experienced an anomaly.

CF card full CF card is too full to accommodate

more images or print settings.

Naming error! The file could not be created because

there is a file with the same name as the

directory that the camera is attempting

to create, or the highest possible file

number has already been reached. In

the Rec. Menu, set the File Reset option

to On. Save all the images you wish to

retain onto a computer, then reformat

the CF card. Please note that formatting

will erase all the existing images and

other data.

Change the battery pack Battery charge is insufficient to operate

the camera. Replace it at once with a

charged one or recharge the battery

pack.

No image No images recorded on CF card.

Image too large You attempted to replay an image

larger than 3200 x 2400 pixels or a

movie clip recorded by another camera.

Incompatible JPEG format You attempted to replay an incompatible

JPEG file.

134

List of Menu Options and Messages

Corrupted Data You attempted to replay an image with

corrupted data.

RAW You attempted to replay an image

recorded in the RAW format.

Unidentified Image You attempted to replay an image that

was recorded in a special format

(proprietary format used by the camera

of another manufacturer, etc.) or a

movie clip recorded by another camera.

Cannot magnify! You attempted to magnify an image

which was photographed with another

camera, recorded in a different format, or

edited on a computer.

Cannot rotate You attempted to rotate an image which

was photographed with another camera,

recorded in a different format, or edited

on a computer.

Incompatible WAVE format Format of recorded sound annotation is

incorrect so it cannot be added to this

image.

Protected! You attempted to erase a protected image.

Too many marks Too many images have been marked with

print settings, transfer settings or slide

show settings. Cannot process any more.

Unselectable image You attempted to set the print settings

for a non-JPEG file.

Exx: (xx: number) Camera malfunction. Turn

the power off and then back on, then

shoot or replay. A problem exists if the

error code reappears. Note the number

and contact your Canon Customer

Support Help Desk. If an error code

displays directly after taking a picture,

the shot may not have been recorded.

Check image in replay mode.

List of Menu Options and Messages

135

List of Messages Displayed

while a Direct Print Function Compatible Printer is Connected

The following messages may appear on the camera’s LCD monitor while

a direct print compatible printer (sold separately) is connected.

No Paper Paper cassette is empty or incorrectly

installed. Paper feed may not be

operating correctly.

No Ink The ink cassette is empty or missing.

Incompatible paper size You attempted to print with a paper

size incompatible with this camera.

Incompatible ink size You attempted to print with an ink

cartridge type incompatible with this

camera.

Ink Cassette Error There is a problem with the ink cassette.

Paper and ink do not match The paper size and ink type are from

different sets.

Paper Jam Paper jammed during printing.

Paper has been changed The paper size was changed between

the time the Print Style menu was

displayed and the time printing started.

Ink has been changed The ink type was changed between the

the time the Print Style menu was

displayed and the time printing started.

Recharge the printer battery The printer’s battery is out of power.

Communication Error A communication error has occurred.

Cannot print! You attempted to print an image shot by

a different camera, one recorded in an

incompatible format, or one downloaded

to and edited with a computer.

Could not print XX images You attempted to print XX number of

images with DPOF print settings that were

shot by a different camera, recorded in an

incompatible format, or downloaded to

and edited with a computer.

Printing

115

• To include the date in the prints, set the Date setting in the Set up

menu in Step 1 above to [On]. You cannot set the date to print

with the Style menu in Step 2 above. Please note however, that

the date will not print if the print type is set to Index even if it is

turned On in Step 1.

• When the print type is set to Both, it is possible to have both the

[Date] and [File No.] options set to [On], but only the file number

will print on the Index print.

• When the print type is set to [Standard], file numbers will not be

printed even if they are set to [On].

• The maximum number of images printed on one page in the

Index print type depends upon the selected paper size.

- Card Size: 20 images

- L Size: 42 images

- Postcard Size: 63 images

(Please refer to your Bubble Jet Printer Quick Start Guide for an

explanation of the number of images printed with a Bubble Jet

printer.)

• Canceling Printing

See page 102.

• Restarting Printing

In the Print Order menu, use the

or button to select

[Resume] and press the

button. The remainder of the selected

images will print.

Printing cannot be resumed under the following circumstances:

- If the print settings were changed before printing is restarted,

- If images with print settings were deleted before printing is

restarted,

- If there was insufficient spare capacity on the CF card when

printing was halted.

Under these circumstances, you can select [OK] in the Print menu

and reprint starting from the first image.

If printing was stopped because of a low battery charge, you are

recommended to resume printing using a household power

source. If you do use a battery pack, ensure that it is fully charged.

Remember to turn the camera power On again before printing.

• Printing Errors

See page 102.

136

List of Menu Options and Messages

List of Messages Displayed while a Direct Print function

Compatible Bubble Jet Printer is Connected

The following messages may appear on the camera’s LCD monitor

while a direct print compatible Bubble Jet printer (sold separately) is

connected.

Please also check the Quick Start Guide for the Bubble Jet printer,

checking the error number displayed on the printer’s control panel

against those listed in the guide.

Printer in use Printer is busy printing from memory

card in computer or printer. Printer will

automatically start printing from camera

when the current print queue empties.

Printer warming up Printer is warming up. When it is ready,

the printer will start printing automati-

cally.

No printhead No printhead installed in printer.

Printer cover open Secure the printer cover.

Media type error You selected a paper type incompatible

with the printer. Select a compatible

paper type in the Print Style menu.

Paper lever error Adjust the paper selection lever to the

proper position.

Low ink level Ink tank needs replacement soon.

Prepare a new ink tank. Select [Continue]

in the error message to resume printing.

Waste tank full Restart printing by pressing RESUME/

CANCEL button on printer, but request

a replacement waste ink tank from

retailer or service center (see printer

manual) soon.

Printer error Turn printer off and on again. If error

persists, consult service center listed in

printer manual.

137

Appendices

Using the Household Power Source

It is best to power the camera with AC Adapter Kit ACK500 (sold

separately) when you are using it for long periods of time or

connecting it to a computer.

• Turn the camera power off before connecting or

disconnecting the AC adapter.

• Connect the power cord to the

compact power adapter first and then

plug the other end into the electrical

outlet.

• Open the battery cover and press the

battery lock in the direction shown

while inserting DC Coupler DR-500.

Insert the DC coupler all the way in

until the battery lock clicks. Slide the

battery cover closed.

• Open the DC coupler terminal cover

and attach the cord to the DC terminal.

• After you have finished using the

camera, unplug the AC adapter from

the electrical outlet.

• Use of an AC adapter kit other than ACK500 may cause a

malfunction in the camera or kit.

DC Coupler

DR-500

Battery

Lock

Compact Power Adapter

CA-PS500

138

Appendices

Using a Car Battery Charger (Optional)

Car Battery Charger CBC-NB1 (sold separately) can be used to charge

battery packs from an automobile’s cigarette lighter socket.

• Always ensure that the automobile’s engine is running

when you use the car battery charger. Use of it with the

engine off may flatten the battery in some automobiles.

Always unplug the car battery charger before turning off

the engine.

• With the engine running, plug the car

battery cable into the cigarette lighter

socket and the battery charger.

• Insert the battery pack all the way into

the battery charger as shown.

• The charging indicator will shine red

while the battery pack is charging. It

will change to green when the charge

is complete.

• After charging, unplug the car battery

cable from the cigarette lighter socket

and remove the battery pack.

• The battery will stop charging whenever you turn the

engine off, so be sure to unplug the car battery cable from

the cigarette lighter socket.

• Wait until the engine is running again to plug the car

battery cable into the cigarette lighter socket.

• The car battery charger can only be used in a negative

ground car. It cannot be used in a positive ground car.

To the cigarette

lighter socket

Charging Indicator

Appendices

139

Camera Care and Maintenance

Use the following procedures to clean the camera body, lens,

viewfinder and LCD monitor.

• Never use thinners, benzene, synthetic cleansers or water

to clean the camera. These substances may distort or

damage the equipment.

Camera Body

Gently wipe dirt off the camera body with a soft cloth or eyeglass lens

wiper.

Lens

First use a lens blower brush to remove dust and dirt, then remove any

remaining dirt by wiping the lens lightly with a soft cloth.

• Never use synthetic cleansers on the camera body or lens.

• If dirt remains, contact the closest Canon Customer Support

Help Desk as listed on the separate Canon Customer

Support leaflet.

Viewfinder and LCD Monitor

Use a lens blower brush to remove dust and dirt. If necessary, gently

wipe with a soft cloth or an eyeglass lens wiper to remove stubborn dirt.

• Never rub or press strongly on the LCD monitor. These

actions may damage it or lead to other problems.

140

Appendices

Troubleshooting

• Press the ON/OFF button for a

moment.

• Confirm that the battery cover

and CF card slot cover are

securely closed.

• Insert a fully charged battery

into the camera.

• Use a household power source.

• Wipe the terminals with a clean

dry cloth.

• Turn the mode dial to the ,

, or position.

• Wait until the flash charges.

You can press the shutter

button when the indicator

glows a steady orange.

• Insert a new CF card.

• If required, download the

images to a computer and erase

them from the CF card to make

space.

• Format CF card (See Formatting

CF Cards, p. 93).

• If reformatting doesn’t work,

the CF card logic circuits may be

damaged. Consult the nearest

Canon Customer Support Help

Desk.

Problem Cause Solution

Camera will not

operate

Camera will not

record

Power is not

turned on

Battery cover or

CF card slot cover

is open

Insufficient battery

voltage

Poor contact

between camera

and battery

terminals

Mode dial is set to

(Replay)

Flash is charging

CF card is full

CF card is not

formatted correctly

Appendices

141

• First close the battery cover or

CF card slot cover and then turn

the power off.

• First close the battery cover or

CF card slot cover and then turn

the power off.

• Replace the battery pack with a

new one.

• Replace the battery pack with a

new one.

• Insert battery pack securely into

battery charger.

• Ensure that battery charger plug

is securely plugged into the

electrical outlet.

• Be careful not to move the

camera while pressing the

shutter button.

• Be careful not to block the AF-

assist Beam with fingers or other

items.

Problem Cause Solution

Lens will not

retract

Battery pack

consumed quickly

Battery pack will

not charge

Image is blurred

or out of focus

Battery cover or

CF card slot cover

was opened with

power on

Battery cover or

CF card slot cover

was opened while

recording to the

CF card (warning

signal sounds)

Battery life

exceeded if

battery pack loses

its charge quickly

at room

temperature (23º

C /73º F)

Battery pack life

exceeded

Poor contact

between battery

pack and battery

charger

Camera moved

Autofocus

function

hampered by

obstruction to AF-

assist Beam

142

Appendices

• Set the AF-assist Beam to [On].

(p. 35)

• Ensure there is at least 76 cm

(2.5 ft.) between the camera

lens and subject.

• Use the Macro mode to shoot

close-ups between 16 and 76

cm (6.3 in. to 2.5 ft.) from the

lens when set to wide angle and

between 26 and 76 cm (10.2 in.

to 2.5 ft.) when set to telephoto.

• Use the Infinity mode to shoot

distant subjects.

• Set the flash to [On].

• Set the exposure compensation

to a positive (+) setting or use

the spot metering function.

• Shoot within 3.5 m (11.5 ft.) of

the subject at the maximum

wide angle or 2 m (6.6 ft.) of

the subject at the maximum

telephoto setting when using

the flash.

• When using the flash, stay at

least 26 cm (10.2 in.) from the

subject.

• Set the exposure compensation

to a negative (-) setting or use

the spot metering function.

Problem Cause Solution

Image is blurred or

out of focus

Subject in recorded

image is too dark

Subject in recorded

image is too bright

AF-assist Beam is

set to off

Subject is out of

focal range

Insufficient light

for shooting

Subject is dark in

contrast to the

background

Subject is too far

away for flash to

reach

Subject is too

close, making the

flash too strong

Subject is bright in

contrast to the

background

Appendices

143

• Change the shooting angle.

• Set the flash to [Off].

• Set the flash to [On].

• Set the video system to the

appropriate setting, NTSC or

PAL, for your TV (p. 118).

• The output will not appear on a

TV monitor in (Stitch Assist)

mode. Shoot in a different

mode.

• Adjust the zoom before

shooting a movie.

Problem Cause Solution

Subject in recorded

image is too bright

Flash does not fire

Image not showing

on TV monitor

Zoom does not

work

Light is shining

directly on the

subject or reflected

off the subject into

the camera

Flash is set to on

Flash is set to off

Incorrect video

system setting

Shooting mode set

to (Stitch

Assist)

Zoom button

pressed during

movie recording

144

Specifications

All data is based on Canon’s standard testing methods.

Subject to change without notice.

PowerShot S330 DIGITAL ELPH / DIGITAL IXUS 330

Camera Effective Pixels: Approx. 2 million

Image Sensor: 1/2.7 in. CCD

(Total number of pixels: approx. 2.1 million)

Lens: 5.4 (W) - 16.2 (T) mm

(35 mm film equivalent: 35-105 mm)

F2.7 (W) - 4.7 (T)

Digital Zoom: Maximum 2.5 x (Maximum 7.5 x with optical zoom)

Optical Viewfinder: Primary imaging real-image optical zoom viewfinder

LCD Monitor: 1.5 in. low-temperature polycrystalline silicon TFT

color LCD, approx. 120,000 pixels

Autofocus: TTL 3-point AiAF/TTL 1-point ceter AF

Focus lock possible

Focusing Range: Normal: 76 cm (2.5 ft.) - ∞

Macro AF: 16- 76 cm (6.3 in.-2.5 ft.) (W)

26-76 cm (10.2 in.- 2.5 ft.) (T)

Shutter: Mechanical + electronic

Shutter Speed: 15-1/1500 sec.

• 1-1/ 6 sec. possible at flash-off or slow-synchro

in manual mode

• 15-1 sec. possible in long shutter mode

• Noise reduction processing on speeds between

15 -1.3 sec.

Light Metering Method: Evaluative metering (linked to focusing point)/

Spot metering

Exposure Control: Program AE

Exposure Compensation: ± 2 EV (in 1/3-stop increments)

Sensitivity: ISO 50/100/ 200/400 equivalent and Auto

(in Auto mode, camera automatically adjusts

sensitivity in the range of ISO 50 to ISO 150

equivalent)

(W): wide angle (T): telephoto

Specifications

145

White Balance: TTL auto / preset (daylight, cloudy, tungsten,

fluorescent, fluorescent H) or custom white balance

Flash: Red-eye reduction auto/auto/on /off/slow-synchro

Flash Range: Normal mode: 76 cm - 3.5 m (2.5- 11.5 ft.) (W)

76 cm -2.0 m (2.5 - 6.6 ft.) (T)

Macro Mode: 26 -76 cm (10.2 in.-2.5 ft.) (W/T)

Shooting Modes: Auto/manual /stitch assist/movie

Continuous Shooting: Approx. 2.5 images/sec.

(Large/Fine mode, LCD monitor off)

Self-Timer: Shoots after approx. 10 sec. or approx. 2 sec.

PC Connected Shooting: Available (USB connection only. Exclusive software

program “Remote Capture” is included in the

camera kit.)

Recording Media: CompactFlash™ card (Type I)

File Format: Design rule for Camera FIle System, DPOF compliant

Image Recording Format Still images: JPEG (Exif 2.2) *

Movies: AVI - Image data: Motion JPEG

- Audio data: WAVE (monaural)

Compression: Superfine/fine /normal

Number of Recording Pixels: Still images: large 1600 x 1200 pixels

medium 1024 x 768 pixels

small 640 x 480 pixels

Movies: 640 x 480 pixels (Approx. 4 sec.)

320 x 240 pixels (Approx. 10 sec.)

160 x 120 pixels (Approx. 30 sec.)

Approx. 20 frames/sec

•

The data in parentheses refer to the

maximum movie length per shooting

Replay Modes: Single image view /index view (9 thumbnails)/

zoomed view (LCD monitor zooms images up to

10 x)/ slide show/ printing with Card Photo Printer

CP-100, CP-10 or Bubble Jet Printer (Direct Print

Function)

Display Languages: English, Deutsch, Français, Nederlands, Dansk,

Suomi, Italiano, Norsk, Svenska, Español, Chinese

and Japanese

(W): wide angle (T): telephoto

146

Specifications

My Camera Settings: Start-up image, Start-up sound, Shutter sound,

Operation sound and Selftimer sound.

Customizing is possible by downloading data from

your computer using the supplied software.

Interface: Universal Serial Bus (USB), Audio / Video output

(NTSC or PAL selectable, Monaural audio)

Power Source: Rechargeable Lithium-ion battery

(type: NB-1LH/NB-1L)

Compact Power Adapter CA-PS500

Car Battery Charger CBC-NB1

Operating Temperatures: 0 - 40º C (32 -104º F)

Operating Humidity: 10% -90%

Dimensions (w x h x d): 94.8 x 62.5 x 31.5 mm (3.7 x 2.5 x 1.2 in.)

(excluding protrusions)

Weight: Approx. 245 g (8.6 oz.)

(camera body only)

* This digital camera supports Exif 2.2 (also called “Exif Print”). Exif Print is a standard

for enhancing the communication between digital cameras and printers. By

connecting to an Exif Print- compliant printer, the camera’s image data at the time of

shooting is used and optimized, yielding extremely high quality prints.

Battery Capacity

Battery Pack NB-1LH (fully charged)

Number of recordable images

LCD monitor on Approximately 150 images

LCD monitor off Approximately 420 images

Replay Approximately 100 minutes

• Excludes movie data.

• At low operating temperatures, the battery performance may drop and the

low battery icon may appear sooner than at high temperature. To improve

performance at these temperatures, warm the battery in your pocket just

before using it in the camera.

Test Criteria

Shooting: Room temperature (23º C / 73º F), alternating between wide

angle and telephoto every 20 second, flash used one in four

shots, power turned off and on again after every eighth shot.

Replaying: Room temperature (23º C / 73º F), continuous replay at 3

seconds per image.

Specifications

147

CF Cards and Estimated Capacities (Recordable Images)

FC-8M FC-16M FC-32M FC-64M FC-128M

7 15 31 64 128

(

1600 x 1200 pixels

)

11 24 49 100 200

24 48 99 200 401

16 32 67 135 271

(

1024 x 768 pixels

) 24 49 102 205 412

46 92 189 379 760

35 70 143 288 577

(

640 x 480 pixels

) 50 99 206 415 831

87 172 353 707 1417

(

640 x 480 pixels

) 6 sec. 13 sec. 27 sec. 56 sec. 113 sec.

MOVIE (

320 x 240 pixels

) 18 sec. 36 sec. 75 sec. 152 sec. 305 sec.

(

160 x 120 pixels

) 48 sec. 97 sec. 198 sec. 399 sec. 799 sec.

• The maximum length of a movie clip recording is approximately: 4 sec. ( ),

10 sec. (

) or 30 sec. ( ). The time shown are the maximum continuous

recording times.

•

(Large), (Medium), (Small), , and indicate the recording

resolution.

• (Superfine), (Fine) and (Normal) indicate the compression setting.

Compression

Resolution

(1600 x 1200 pixels) 957 KB 611 KB 302 KB

(1024 x 768 pixels) 450 KB 294 KB 155 KB

(640 x 480 pixels) 208 KB 141 KB 79 KB

(640 x 480 pixels) 900 KB/sec.

Movies (320 x 240 pixels) 380 KB/sec.

(160 x 120 pixels) 130 KB/sec.

Approximate Image File Sizes (Estimated)

148

Specifications

Battery Pack NB-1LH

Type: Rechargeable Lithium Ion Cell

Nominal Voltage: 3.7 V

Typical Capacity: 840 mAh

Cycle Life: Approx. 300 times

Operating Temperatures: 0 -40 ºC (32 -104 ºF)

Dimensions: 32.3 x 49.8 x 10.6 mm (1.3 x 1.9 x 0.4 in.)

Weight: Approx. 29 g (1.0 oz.)

Battery Charger CB-2LS/CB-2LSE

Rated Input: 100-240 V AC (50/ 60 Hz)

0.075 A (100 V) -0.045 A (240 V)

Rated Output: 4.2 V DC/ 0.5 A

Charging Time: Approx. 130 minutes *

Operating Temperatures: 0 -40 ºC (32 -104 ºF)

Dimensions: 90.4 x 56.0 x 28.0 mm (3.6 x 2.2 x 1.1 in.)

Weight: Approx. 78 g (2.8 oz.)

When charging Battery Pack NB-1LH

CompactFlash™ Card

Card Slot Type: Type I

Dimensions: 36.4 x 42.8 x 3.3 mm (1.4 x 1.7 x 0.1 in.)

Weight: Approx. 10 g (0.4 oz.)

Compact Power Adapter CA-PS500

(Included with the optional AC Adapter Kit ACK500)

Rated Input: AC 100- 240 V (50/ 60 Hz)

0.17 A

Rated Output 4.3 V DC /1.5 A

Operating Temperatures: 0 -40 ºC (32- 104 ºF)

Dimensions: 42.6 x 104.4 x 31.4 mm (1.7 x 4.1 x 1.2 in.)

Weight: Approx. 180 g (6.3 oz.)

Specifications

149

Car Battery Charger CBC-NB1 (Optional)

Rated Input: DC 12-24 V, 4.3 W

Rated Output: 4.2 V DC, 0.55 A

Charging Time: Approx. 130 Minutes*

Operating Temperatures: 0 -40 ºC (32- 104 º F)

Dimensions: 90.4 x 56.0 x 28.0 mm (3.6 x 2.2 x 1.1 in.)

Weight: Approx. 106 g (3.7 oz.)

When charging Battery Pack NB-1LH

150

Index

AC Adapter Kit (ACK500) 137

AE Lock 62

AF Frame 31, 64

AF-assist Beam 35

AF Lock 60

AiAF 33

Autofocus 33, 64

Autofocus Lock 60

Auto Mode 18

Auto Rotate 74

AV Cable AVC-DC100 118

Battery

Battery Pack Charge 22

Capacities 146

Handling 20

Installing 21

Recharging 19

Battery Pack 19

Care and Maintenance 139

CF Card

Capacities 147

Formatting 93

Handling 24

Installing 23

Car Battery Charger 138

Compression 47

Continuous Shooting 53

Customizing the Camera 42

Date /Time 25

DIGITAL Terminal 99, 100, 120

Digital Zoom 36, 52

Direct Interface Cable

DIF-100 98

Direct Print Function Compatible

BJ Printer 99

Direct Print Function Compatible

Printer 98

Direct Print Function 94

DPOF 94, 96, 107, 116

DPOF Print Order 94

Printing 107

Print Style 111

Resetting 113

Selecting Images 107

DPOF Transfer Order 116

Downloading Images to a Computer

119

Erasing

All Images 92

Single Images 91

Exposure 63, 66

FE Lock 63

File Number 75

File Sizes 147

Flash 49

Focus Lock 60

Formatting 93

Household Power Source 137

Histogram 32

Image File Sizes 147

Index View 80

Indicator 17

ISO Speed 73

Language 26

LCD Monitor

Information Displayed 30

Using the LCD Monitor 29

Index

151

Macro Mode 51

Magnify 79

Manual Mode 18

Manual White Balance 70

My Camera 129

Play 125

Rec. 122

Set up 127

Messages

List of Messages 133

Messages Displayed while a Direct

Print Compatible Bubble Jet

Printer is Connected 136

Messages Displayed while a Direct

Print Compatible Printer is

Connected 135

Metering Method 65

Mode Dial 18, 45

Movie

Movie Mode 18, 58

Viewing 81

My Camera Menu 129

My Camera Settings 42

Adding 44

Changing 43

File Format 44

On /Off Button 27

Optical Viewfinder 33

Photo Effect 72

Play Menu 125

Power On/Off 27

Power Lamp 16

Power Save 28

Print Settings (Direct Print Function)

Number of Print Copies 103

Printing Area 105

Print Style 103

Protect 90

Rec. Menu 122

Red-Eye Reduction Function 50

Replay Mode 18

Resolution 47

Review Duration 46

Rotate 83

Self-Timer 54

Set up Menu 127

Shooting Mode 18, 45

Functions Available in Each

Shooting Mode 76

Shutter Button 34

Pressing Fully 35

Pressing Halfway 34

Shutter Speed 67

Single Image View 78

Slide Show 86

Play Time 89

Repeat Settings 89

Sound Memo 84

Spot AE Point Frame 31, 65

Stitch Assist Mode 18, 55

Telephoto 36

USB Cable 120

Video Output System 118

Viewfinder 33

Viewing

Single Image View 78

Index View 80

White Balance 69

Wide Angle 36

Wrist Strap 15

152

Disclaimer

• While every effort has been made to ensure that the information contained in this

guide is accurate and complete, no liability can be accepted for any errors or

omissions. Canon reserves the right to change the specifications of the hardware

and software described herein at any time without prior notice.

• No part of this guide may be reproduced, transmitted, transcribed, stored in a

retrieval system, or translated into any language in any form, by any means,

without the prior written permission of Canon.

• Canon makes no warranties for damages resulting from corrupted or lost data

due to a mistaken operation or malfunction of the camera, the software, the

CompactFlash™ cards (CF cards), personal computers, peripheral devices, or use

of non-Canon CF cards.

Trademark Acknowledgments

• Canon and PowerShot are trademarks of Canon, Inc.

• CompactFlash is a trademark of SanDisk Corporation.

• iBook and iMac are trademarks of Apple Computer, Inc.

• Macintosh, PowerBook, Power Macintosh and QuickTime are trademarks of Apple

Computer, Inc, registered in the United States and/or other countries.

• Microsoft, Windows and Windows NT are either registered trademarks or trademarks of

Microsoft Corporation in the United States and/or other countries.

• Other names and products not mentioned above may be registered trademarks or

trademarks of their respective companies.

FCC Notice

(Digital Camera, Model PC1026)

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions;

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may

cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for Class B

digital devices, pursuant to Part 15 of the FCC rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

The cable with the ferrite core provided with the digital camera must be used with

this equipment in order to comply with Class B limits in Subpart B of Part 15 of the

FCC rules.

Do not make any changes or modifications to the equipment unless otherwise

specified in the manual. If such changes or modifications should be made, you could

be required to stop operation of the equipment.

Canon U.S.A. Inc.

One Canon Plaza, Lake Success, NY 11042, U.S.A.

Tel No. (516) 328-5600

Canadian Radio Interference Regulations

THIS CLASS B DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN

INTERFERENCE CAUSING EQUIPMENT REGULATIONS.

Réglementation canadienne sur les interférences radio

CET APPAREIL NUMERIQUE DE LA CLASSE B RESPECTE TOUTES LES EXIGENCES DU

REGLEMENT SUR LE MATERIEL BROUILLEUR DU CANADA.

Canon Digital IXUS 330 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info