3 System Connections Replacing the Main Capture Camera and Lens
43
Removing the Main Capture Camera from the Camera Unit
1. Turn the camera unit so the bottom of the camera is facing up and loosen the camera mounting
bracket’s hex head bolts (M5, x3).
2. Loosen the 1/4" hex head bolt from the camera’s tripod socket using the 4 mm hex wrench.
Loosen the hex head bolt gently until it does not turn anymore.
3. Return the camera to the upright position, turn the camera mounting bracket so it is at the bottom
and remove the lens supporter or positioning element.
4. Turn the bracket so the bottom of the camera is facing up.
5. Slide the camera mounting bracket toward the lens, move the camera so the tripod socket’s hex head
bolt is at the end of the screw hole’s rail and then loosen the hex head bolt completely and remove
the camera.
6. If a lens supporter is attached to the lens, remove it if necessary.
Attaching a Main Capture Camera and Lens and Preparing Camera Unit
See Preparing the Camera Unit at the beginning of this chapter (A 19) and follow the procedures from the beginning.
