Handleiding Cannondale Super 6 Evo - 2020 (pagina 1 van 28) (Engels)

779945

Verklein

Vergroot

Pagina terug

1/28

Pagina verder

CANNONDALE USA

Cycling Sports Group, Inc.

1 Cannondale Way,

Wilton CT, 06897, USA

1800726-BIKE (2453)

www.cannondale.com

CANNONDALE EUROPE

Cycling Sports Group Europe, B.V.

Hanzepoort 27, 7570 GC, Oldenzaal,

Netherlands +41 61 4879380

servicedeskeurope@

cyclingsportsgroup.com

CANNONDALE UK

Cycling Sports Group

Vantage Way, The Fulcrum,

Poole, Dorset, BH12 4NU

+44 (0)1202732288

sales@cyclingsportsgroup.

co.uk

WWW.CANNONDALE.COM

Topstone Owner’s Manual Supplement

134949 Rev. 1

READ THIS SUPPLEMENT AND YOUR

CANNONDALE BICYCLE OWNER’S MANUAL.

Both contain important safety information. Keep

both for future reference.

Owner’s Manual Supplement

English

CANNONDALE USA

Cycling Sports Group, Inc.

1 Cannondale Way,

Wilton CT, 06897, USA

1800726-BIKE (2453)

www.cannondale.com

CANNONDALE EUROPE

Cycling Sports Group Europe, B.V.

Hanzepoort 27, 7570 GC, Oldenzaal,

Netherlands +41 61 4879380

servicedeskeurope@

cyclingsportsgroup.com

CANNONDALE UK

Cycling Sports Group

Vantage Way, The Fulcrum,

Poole, Dorset, BH12 4NU

+44 (0)1202732288

sales@cyclingsportsgroup.

co.uk

WWW.CANNONDALE.COM

Topstone Owner’s Manual Supplement

134949 Rev. 1

Safety Messages

In this supplement, particularly important information

is presented in the following ways:

Indicates a hazardous situation which, if

not avoided, may result in death or serious

injury.

NOTICE

Indicates special precautions that must

be taken to avoid damage.

The following symbols are used in this manual:

Symbol Name Description

NGLI-2

NGLI2 synthetic grease Apply NGLI2 synthetic grease.

CRB-GEL

Carbon gel Apply carbon gel (friction paste) KF115/

Medium-strength

removable thread lock Apply Loctite® 242 (blue) or equivalent.

137369 Rev 1.

EnglishSuperSix EVO - Owner’s Manual Supplement

CONTENTS

Safety Information ....................25

Technical Information .............619

Replacement Parts .....................20

Cannondale Supplements

This manual is a “supplement” to your

Cannondale Bicycle Owner’s Manual.

This supplement provides additional

and important model speciﬁc safety,

maintenance, and technical information. It

may be one of several important manuals/

supplements for your bike; obtain and read

all of them.

Please contact your Authorized Cannondale

Dealer immediately if you need a manual

or supplement, or have a question about

your bike. You may also contact us using

the appropriate country/region/location

information.

You can download Adobe Acrobat PDF

versions of any manual/supplement from our

website: http://www.cannondale.com.

Contacting Cannondale

Cannondale USA

Cycling Sports Group, Inc.

1 Cannondale Way, Wilton CT, 06897, USA

1800726-BIKE (2453)

Cycling Sports Group Europe B.V

Mail: Postbus 5100

Visits: Hanzepoort 27

7570 GC, OLDENZAAL, Netherlands

Tel: +41 61 551 14 80

Fax: +31 54 151 42 40

International Distributors

Consult our websIte to identify the

appropriate Cannondale Dealer for your

region.

Your Cannondale Dealer

To make sure your bike is serviced and

maintained correctly, and that you protect

applicable warranties, please coordinate

all service and maintenance through your

Authorized Cannondale Dealer.

NOTICE

Unauthorized service, maintenance, or

repair parts can result in serious damage

and void your warranty.

137369 Rev 1.

EnglishSuperSix EVO - Owner’s Manual Supplement

SAFETY INFORMATION

Important Composites

Message

Your bike (frame and components) is

made from composite materials also

known as “carbon ﬁber.”

All riders must understand a fundamental

reality of composites. Composite

materials constructed of carbon ﬁbers

are strong and light, but when crashed or

overloaded, carbon ﬁbers do not bend,

they break.

For your safety, as you own and use the

bike, you must follow proper service,

maintenance, and inspection of all the

composites (frame, stem, fork, handlebar,

seat post, etc.) Ask your Cannondale

Dealer for help.

We urge you to read PART II, Section D.

“Inspect For Safety” in your Cannondale

Bicycle Owner’s Manual BEFORE you

ride.

You can be severely injured, paralyzed

or killed in an accident if you ignore this

warning.

Inspection & Crash Damage

Of Carbon Frames/Forks

After A Crash Or Impact:

Inspect frame carefully for damage. See

PART II, Section D. Inspect For Safety in

your Cannondale Bicycle Owner’s Manual.

Do not ride your bike if you see any sign

of damage, such as broken, splintered, or

delaminated carbon ﬁber.

Any of the following may indicate a

delamination or damage:

• An unusual or strange feel to the

frame

• Carbon which has a soft feel or

altered shape

• Creaking or other unexplained

noises,

• Visible cracks, a white or milky color

present in carbon ﬁber section

Continuing to ride a damaged frame

increases the chances of frame failure,

with the possibility of injury or death of

the rider.

137369 Rev 1.

EnglishSuperSix EVO - Owner’s Manual Supplement

Servicing

This supplement may include procedures

beyond the scope of general mechanical

aptitude.

Special tools, skills, and knowledge may

be required. Improper mechanical work

increases the risk of an accident. Any

bicycle accident has risk of serious injury,

paralysis or death.

To minimize risk we strongly recommend

that owners always have mechanical

work done by an Authorized Cannondale

Dealer.

Disc Brakes on Road Bikes

Relative to conventional rim brakes, disc

brakes are less aected by water, do not

wear or heat the rims and therefore are

more consistent. Disc brakes also may be

more powerful.

To minimize risk of injury or accidents:

• Understand that road bikes have a

relatively small tire contact patch

(part of the tire that touches the

road). In order to apply the brakes

safely and eectively, you may

need more or less braking force in

dierent situations. You need to

take into account various road and

weather conditions that can aect

traction.

• Disc brakes are excellent, but not

some kind of magic. Take some time

riding your new disc brake road bike

in lower risk circumstances to get

used to the feel and performance of

the disc brakes and tires.

You can be severely injured, paralyzed

or killed in an accident if you ignore this

message.

Intended Use

The intended use of all

models is

ASTM CONDITION 1,

High-Performance Road.

Please read your Cannondale Bicycle

Owner’s Manual for more information

about Intended Use and Conditions 15.

137369 Rev 1.

EnglishSuperSix EVO - Owner’s Manual Supplement

Trainers

If you ride a trainer that requires removal

of the front wheel and clamps the fork

dropouts: Be sure your fork quick release is

tight! Relative movement will wear parts,

weaken and damage your bike.

If you ride a trainer that holds the bike up

by clamping the rear quick release between

two cones: Take o the lightweight quick

release that came with your bike. Substitute

a heavy, classic all steel quick release and

clamp it tight! Relative movement will wear

parts, weaken and damage your bike. Note

that many modern quick releases will not

ﬁt the clamping cones in this kind of trainer

because their shapes are incompatible.

For thru axles, make sure you follow the

trainer manufacturer instructions for the use

of any required adapters.

Be particularly cautious with a carbon frame

or fork. Carbon is relatively soft, not abrasion

resistant. If there is any relative movement,

carbon will wear quickly.

If you ride a trainer a lot, consider using an

old bike: Corrosion from sweat will take its

toll. Weight is irrelevant. Save wear on your

expensive components.

Ask you dealer for help with trainers, the

right one and the correct way to use it.

NOTICE

TRAINERS - Improperly mounting a

bike in a trainer, or using one that is not

compatible with your particular bike frame

can cause serious damage.

WATER BOTTLES - An impact, crash, or

loose bottle cage can result in damage to

your frame.

These kinds of damage is not covered by

the Cannondale Limited Warranty.

Water Bottles

Side impacts to a water bottle or cage can

result in damage to threaded inserts due to

the leverage on a very small area. In a crash,

certainly the last thing you should be worried

about is saving the threaded inserts in your

frame. However, when you are storing or

transporting your bike, take steps to prevent

situations where a water bottle may be hit or

bumped by a strong force that would cause

damage. Remove bottle and cage when you

are packing your bike for travel.

Periodically check the attachment of

the bottle cage; tighten the cage bolts if

necessary. Don’t ride with a loose bottle

cage. Riding with loose cage bolts can

produce a rocking motion or vibration of the

attached cage. A loose cage will damage the

insert and possibly lead to the inserts to pull

out.

It may be possible to repair a loose insert,

or install another insert only if the frame is

undamaged. Replacement requires the use

of a special tool. If you notice damage to the

threaded insert, please ask your Cannondale

Dealer for help.

137369 Rev 1.

EnglishSuperSix EVO - Owner’s Manual Supplement

Building Up A Frame Set

Before building up a frame set, consult with

your Cannondale Dealer and the component

manufacturers, and discuss your riding style,

ability, weight, and interest in and patience

for maintenance.

Make sure the components chosen are

compatible with your bike and intended for

your weight and riding style.

Generally speaking, lighter weight

components have shorter lives. In selecting

lightweight components, you are making a

trade-o, favoring the higher performance

that comes with less weight over longevity.

If you choose more lightweight components,

you must inspect them more frequently.

If you are a heavier rider or have a rough,

abusive or “go for it” riding style, buy heavy

duty components.

Read and follow the component

manufacturers warnings and instructions.

Tightening Torques

Correct tightening torque for the fasteners

(bolts, screws, nuts) on your bicycle is very

important to your safety. Correct tightening

torque for the fasteners is also important

for the durability and performance of your

bicycle. We urge you to have your dealer

correctly torque all fasteners using a torque

wrench. If you decide to torque fasteners

yourself always use a torque wrench.

Find Tightening Torque Information :

The wide range of bicycle models and

components used means that a listing of

tightening torque would be out of date by

the time it was published. Many fasteners

should be installed with a thread locking

adhesive such as Loctite®.

To determine correct tightening torque

and any adhesive application for a

fastener we ask you to check:

• Many components are marked.

On-product marking is becoming

common.

• Torque specs in the component

manufacturers instructions shipped

with your bicycle.

• Torque specs listed on the websites

of component manufacturers.

• With your dealer. Dealers have

access to current data and have

experience with correct torque for

most fasteners.

137369 Rev 1.

EnglishSuperSix EVO - Owner’s Manual Supplement

TECHNICAL INFORMATION

Frame Speciﬁcations

SuperSix Evo HM/Carbon Disc

Item Speciﬁcation

Head Tube Sizes 4454 cm: UPR: 11/8 in, LWR: 11/4 in

Sizes 5662 cm: UPR: 11/8 in, LWR: 13/8 in

Headset Sizes 4454 cm: Integrated, 11/8 in - 11/4 in

Sizes 5662 cm: Integrated, 11/8 in - 13/8 in

Bottom Bracket: Type/Width PF30A / 73 mm

Front Derailleur Brazed-on

Seat Post: Dia./Binder HG/HGSL 27 KNOT / Internal Wedge

Min. Seat Post Insert 65 mm

Max. Seat Post Insert 44cm-140 mm, 48 cm - 179 mm,

5162 cm (measure)

Tire Size x Max. Width 700c x 30 mm (measured)

Fork Maximum Turning Angle +/- 55°

Brakes: Mount Type / Min/Max Rotor Dia. RR: Flat Mount / 140 mm / 160 mm

FT: Flat Mount / 140 mm / 160 mm

Axles: Type / Hub Spacing / Length RR: Speed Release TA Double Lead / 142  12

mm / 165 mm

FT: Speed Release TA Double Lead / 100  12

mm / 119 mm”

Intended Use: ASTM Condition 1

Max. Weight Limit: Total

(rider+all equipment)

285 lbs / 129 kg

137369 Rev 1.

EnglishSuperSix EVO - Owner’s Manual Supplement

SuperSix Evo Carbon Rim

Item Speciﬁcation

Head Tube Sizes 4454 cm: UPR: 11/8 in, LWR: 11/4 in

Sizes 5662 cm: UPR: 11/8 in, LWR: 13/8 in

Headset Sizes 4454 cm: Integrated, 11/8 in - 11/4 in

Sizes 5662 cm: Integrated, 11/8 in - 13/8 in

Bottom Bracket: Type/Width PF30A / 73 mm

Front Derailleur Brazed-on

Seat Post: Dia./Binder HG/HGSL 27 KNOT / Internal Wedge

Min. Seat Post Insert 65 mm

Max. Seat Post Insert 44cm-140 mm, 48cm - 179 mm,

5162cm (measure)

Tire Size x Max. Width 700c x 28 mm (measured)

Fork Maximum Turning Angle +/- 55°

Brakes: Mount Type / Min/Max Rotor Dia. Direct Mount Rim Brakes

Axles: Type / Hub Spacing / Length RR: QR / 130  10 mm

FT: QR / 100  9 mm

Intended Use: ASTM Condition 1

Max. Weight Limit: Total

(rider+all equipment)

285 lbs / 129 kg

Serial Number

The serial number is located on the bottom

bracket. It is a 7-character barcode (1). Use

this serial number to register your bike.

To register your bike: go to the

Product Registration section of our

website at www.cannondale.com

137369 Rev 1.

EnglishSuperSix EVO - Owner’s Manual Supplement

75 mm

ASeat Tube Length

BTop Tube Horizontal

DHead Tube Angle

ESeat Tube Angle

GHead Tube Length

H Wheelbase

I Front Center

J Chain Stay Length

K Bottom Bracket Drop

L Bottom Bracket Height

M Fork Rake

N Trail

O Stack

P Reach

Geometry

Dimensions = centimeter/inches

Size 44 48 51 54 56 58 60 62

A 40.0/15.7 43.8/17.2 47.7/18.8 51.5/20.3 53.6/21.1 55.8/22.0 57.9/22.8 60.0/23.6

B 51.2/20.2 52.0/20.5 52.8/20.8 54.6/21.5 56.2/22.1 57.8/22.8 59.4/23.4 61.1/24.1

D 70.9° 71.2° * * 73.0° * * *

E 74.3° * * 73.7° 73.3° 72.9° 72.5° 72.1°

G 9.9/3.9 11.4/4.5 13.0/5.1 15.3/6.0 16.4/6.5 18.8/7.4 20.9/8.2 23.0/9.1

H 97.9/38.5 98.5/38.8 99.4/39.1 100.8/39.7 99.2/39.1 100.5/39.6 101.6/40.0 102.8/40.5

I 58.2/22.9 58.8/23.2 59.7/23.5 61.1/24.0 59.5/23.4 60.7/23.9 61.8/24.3 63.0/24.8

J 40.8/16.1 * * * * * * *

K 7.4/2.9 * * 7.2/2.8 * 6.9/2.7 * *

L 26.8/10.6 * * 27.1/10.6 * 27.3/10.7 * *

M 5.5/2.2 * * * 4.5/1.8 * * *

N 6.0/2.4 5.8/2.3 * * 5.8/2.3 * * *

O 50.4/19.8 51.9/20.4 53.4/21.0 55.4/21.8 57.4/22.6 59.4/23.4 61.4/24.2 63.4/25.0

P 37.0/14.6 37.4/14.7 37.8/14.9 38.4/15.1 39.0/15.3 39.5/15.6 40.0/15.8 40.6/16.0

* Indicates same.

All Speciﬁcations subject to change without notice.

137369 Rev 1.

EnglishSuperSix EVO - Owner’s Manual Supplement

Bottom Bracket - PF30A / 73 mm

Maintenance

Have the bearings inspected annually, anytime the

crankset is removed, or if a problem is indicated.

With crankset removed, rotate the inner bearing

race of both bearings; rotation should be smooth

and quiet. Execessive play, roughness, or corrosion

indicates a damaged bearing.

Replacement

Bearings are not removable from the PF30 cup

systems pressed into the bottom bracket shell.

Therefore, both bearing and cup must be removed

together replaced as a new set.

Before installing any new bearing units into the

shell, thoroughly clean the inside surface of the

bottom bracket shell with a clean dry shop towel.

Also, make sure both bearing units and the BB shell

surfaces are clean and dry. Do not apply

grease.

To avoid serious damage to the frame, it is

important to remove bearing systems very carefully

using proper tools indicated by the manufacturer’s

service instructions. Make sure the bearings (cup

or adapter parts) are driven out squarely and evenly

from inside the shell! Do not pry components from

shell.

Follow the manufacturer’s instruction for assembly and

installation of the bearing system. Use a headset press

such as Park Tool HHP-2. See http://www.parktool.com/

product/bearing-cup-press-HHP-2.

Select appropriate press and adapters to ensure that

force is only applied to the cup and not the bearing

inside. Press until both cup anges are mated to the BB

shell edge.

NOTICE

• Consult with your Cannondale Dealer

on the quality and compatibilty of any

proposed replacement component.

• Do not use chemical solvents to clean. Do

not remove frame material or use surfacing

tools on bottom bracket shell.

• Frame damage, caused by improper

components, component installation or

removal is not covered by your warranty.

46 mm

Identiﬁcation

1. Frame BB Shell

2. PF30 Cup

3. Bearing

(Cross-section)

DRIVE SIDE NONDRIVE SIDE

(Side view, Drive side, no bearings)

137369 Rev 1.

EnglishSuperSix EVO - Owner’s Manual Supplement

SHIMANO Di2

Mechanical

SRAM eTAP

Shimano P/N

EW-RS910

1 N·m

DT Port Guides / Routing

Identiﬁcation

1. Screws

2. Cover

3. Bracket (Di2 only)

BB Cable Guides / Routing

1 N·m

The interior of the BB Shell is to remain free of any cable,

housing or wires passing through it. These items must

be captured by the cable guides as they emerge from the

downtube and exit to the chainstays and seat tube.

Please Note: Note Di2 cables must not touch the spindle. Use

a BB bearing assembly with a sleeve between the bearings to

protect the spindle from wear due to cables touching it.

Identiﬁcation

1. FD cable & rear disc brake guide.

2. RD cable & di2 cable

3. Screws

a. Slot for Di2 cable(s).

b. Rear brake housing trough

137369 Rev 1.

EnglishSuperSix EVO - Owner’s Manual Supplement

2 N·m

NGLI-2

To replace:

Remove the rear axle.

Remove the mounting screw(s) and remove the old

hanger from the dropout. Clean the area around

the dropout and inspect the frame carefully for any

cracks or damage. If you ﬁnd damage have the

frame inspected by your Cannondale Dealer .

If the dropout is un-damaged, apply a light ﬁlm

of grease between the frame and mount. This

will help minimize any noise or “creaking” that

might result from very slight movement between

the dropout and mount during movement of the

derailleur.

Slide the new hanger onto the dropout. Apply

Loctite® 242 (or medium strength thread lock)

to the screw threads and tighten to the speciﬁed

torque.

Rear Derailleur Mount Front Derailleur Mount

1. RD Mount

2. Screw

1. FD Mount

2. FD cable

3. Frame Plug

4. Di2 Cable Plug

(DISC frame shown)

(Mechanical shift shown)

The front derailleur mount is bonded to the frame.

It is a “braze-on type.”

Do not attempt to remove the mount.

When using a mechanical FD system or SRAM

Etap, make sure the frame plug is installed to

prevent the intrusion of water or debris into the

frame.

When using Di2 Systems, use the Di2 Cable Plug.

137369 Rev 1.

EnglishSuperSix EVO - Owner’s Manual Supplement

0°

55° 55°

Headtube Steering Angle

+/- 55 degrees

NOTICE

Do not force the steering past the stop points.

If the front end steering of the bikes is over-

loaded (due to e.g. a handlebar strike, a crash,

etc.) damage to the frame, fork or pin may

result.

This type of damage is not covered by the

limited warranty.

Identiﬁcation

1. Fork Stop Pin (molded)

2. Head Tube Stop Limits (molded)

3. Steering Angle

Underside of headtube.

137369 Rev 1.

EnglishSuperSix EVO - Owner’s Manual Supplement

Rear Brake Bridge

The rear brake bridge assembly parts are required

to be used.

These parts provide necessary support to the

frame and ensure that braking force is not

absorbed by movement of the frame.

The parts are to be installed on the underside of

the seatstays at the frame bosses as shown.

Do not adapt or modify the frame or the bridge

parts in any way.

Follow the instruction provided by the brake

manufacturer when installing brake.

Rear Brake Bridge Assy - RIM

Identiﬁcation

1. Seat Stays

2. Brake Bridge

3. Washer (2X)

4. Nuts (2X)

Do not ride without a rear brake system

installed.

Do not omit or remove the rear brake

bridge parts.

137369 Rev 1.

EnglishSuperSix EVO - Owner’s Manual Supplement

Seat Post

Installation & Adjustment

Before installing:

• Use a clean shop towel to wipe out any

residual carbon gel paste from the inside the

seat tube.

• Apply fresh carbon friction gel to the seat

post and place a little bit inside the seat tube.

• Make sure the seal is in good condition and in

place on the seat post.

To adjust:

1. Insert the prepared seat post into the frame.

Maintain the speciﬁed minimum insert.

2. Set the saddle height.

3. Insert 4 mm hex through the underside seat

tube opening as shown.

4. Tighten the binder screw to the speciﬁed

torque.

5. Slide the seal against the frame.

5. If the saddle angle adjustment is required,

loosen the saddle clamp bolts, adjust the

saddle, and tighten to the speciﬁed torque.

NOTICE

• Do not use any spray cleaners or solvents

to clean. Use only a clen dry shop towel.

• Do not exceed the speciﬁed torque. If

you over-tighten the binder bolt, you will

damage the binder, seat post or the frame.

Maintenance

Periodically, remove the seat post and the clamp

assembly to clean, inspect for damage and renew

the application of grease and carbon gel.

See also, “Seat Binder Inspection.”

Minimum Insert

The minimum insert depth the seat post must be

inserted into the frame is 65mm.

Maximum Insert

The total length of seat post that may be inserted

will vary with the frame size and should be checked

in each frame.

To check, carefully slide a seat post into the frame

until it stops; then lift it up 5mm.

NOTICE

A seat post should not be bottomed out inside the

frame at any time. Have your Cannondale Dealer

size the seat post appropriately.

THE SEAT POST MUST ONLY BE CUT BY A

PROFESSIONAL BIKE MECHANIC. Incorrectly

cutting the seat post can result in damage

leading to an accident.

For more information about carbon ﬁber seat

posts, see also “Care and Maintenance of Carbon

Fiber Seat Posts” in your Cannondale Bicycle

Owner’s Manual.

137369 Rev 1.

EnglishSuperSix EVO - Owner’s Manual Supplement

5mm

65mm

6 N·m

NGLI-2

CRB-GEL

Minimum Insert

Maximum Insert

Maximum Depth

Apply

carbon paste to

entire length of the

inserted seat post

Identiﬁcation

1. Saddle Clamp

2. Seat Post

3. Sliding Clamp

4. Seal

5. Di2 Battery

6. Battery Bracket

7. Di2 Cable

137369 Rev 1.

EnglishSuperSix EVO - Owner’s Manual Supplement

Seat Binder Inspection

The internal seat binder system consists of a sliding clamp assembly and a nut base with a double-side

adhesive holding it to a special mating surface inside the seat tube. The sliding clamp parts can be removed

when the seat post is out.

Always clean the surfaces of the sliding clamp by wiping them with a clean dry lint-free shop towel only. Do

not soak the parts, as the internal washer is lubricated with grease. Solvents will wash out the lubricant and the

assembly will have to be regreased by disassembling it completely.

NOTICE

If the nut base has become rotated, it should be removed and re-afxed to the frame. The process is

described in the Service Instruction for the parts kit. These instruction are not provided in this manual. We

reccommend that you have a Cannondale Dealer perform the replacement.

Please Note: During ﬁrst assembly of the nut base, it is important to not push on the 4mm allen when

tightening onto the seatpost. This can disengage the adhesive tape before proper bonding. A poor bond can

lead to misalignment. The 3M™ VHB™ Tape 5980 is pressure sensitive.

To inspect

1. To remove the seat post. See previous page.

2. To remove the sliding clamp, use a 4 mm hex key

and turn grub screw slowly clockwise until the

clamp is disengaged from the nut base.

3. Use the 4 mm hex to push the clamp out through

the seat tube opening.

4. Look into the frame opening. Use a pen ashlight.

Check the position of the nut base. See CORRECT

next page.

5. If the nut base is missing, or rotated or damaged,

a replacement is required. This service should be

performed by a Cannondale Dealer.

6. Check the condition of the clamp. The seat post

face and frame contact surfaces should be smooth.

If they are not, the clamp assembly should be

replaced with a new one.

7. Clean the parts and inside the seat tube with a dry

shop towel and re-apply grease and carbon paste

as indicated.

8. Returning the sliding clamp to the frame, using the

4 mm hex to guide it to the nut base.

9 Turn the grub screw counter-clockwise to engage

the nut base. Make sure it is enaged sufciently to

easily insert the seat post into the seat tube.

137369 Rev 1.

EnglishSuperSix EVO - Owner’s Manual Supplement

CRB-GEL

NGLI-2

Identiﬁcation

1. Sliding Clamp

2. Roll Pins (2X)

3. Washer

4. Grub Screw

5. Nut Base

6. Pressure Sensitive Adhesive Tape

(Double-sided)

This is INCORRECT.

The nut plate is rotated.

This is CORRECT.

Correct application

of carbon paste

and grease.

(shown disassembled)

The pressure sensitive adhesive

double-sidedtape secures the

aligned nut base in the frame.

When applied the nut base and

frame should be very clean for a

good bond.

Ready to accept seat post.

137369 Rev 1.

EnglishSuperSix EVO - Owner’s Manual Supplement

KNØT Stem Spacers

Spacers can be ﬂexed open to allow spacer

assembly / disassembly without disconnecting

cables.

Bend spacer inwards to route cables through ﬁrst

slot, then route cables through the second slot.

Assemble spacer on steerer tube.

Spacers and stem have interlocking feature to

ensure alignment.

137369 Rev 1.

EnglishSuperSix EVO - Owner’s Manual Supplement

Hinge covers together and slide them over the stem

body. Stem body and covers have interlocking features.

Close right stem cover rst, then rotate left stem cover in

place and close around the stem body

Assemble the stem covers with the M3 bolt (1Nm)

137369 Rev 1.

EnglishSuperSix EVO - Owner’s Manual Supplement

REPLACEMENT PARTS

1 N·m

N·m

Y X

Di2

eTap

Di2

eTap

DROP

REACH

STEM

LENGTH

1 N·m

CRB-GEL

5 N·m

CRB-GEL

7.5mm

12.5mm

(2X)

(4X)

(1X)

2 N·m

Frame / Fork

ID Part Number Description DISC RIM

KP255/ Derailleur Hanger QR ST SS 027 ✔

K33009 Derailleur Hanger TA ST SS 070 ✔

K26030 S6 EVO Internal Seat Binder ✔ ✔

K26070 Seatpost Silicone Grommet ✔ ✔

-- KF115/ Carbon Seatpost Gel ✔ ✔

EK34140 Chainstay Protection Film ✔ ✔

K32170 S6 Evo Grommets ✔ ✔

K26050 KNOT 27 Rail Clamps and Hardware ✔ ✔

137369 Rev 1.

EnglishSuperSix EVO - Owner’s Manual Supplement

ID Part Number Description DISC RIM

K2601000 HG 27 KNOT Crb Seatpost 330mm 0 O/Set ✔ ✔

K2601015 HG 27 KNOT Crb Seatpost 330mm 15 O/Set ✔ ✔

K2602015 C1 27 KNOT Alloy Seatpost 330mm 15 O/Set ✔ ✔

K32180 KNOT 27 Di2 Battery Mount ✔ ✔

K33070 S6 EVO FD Hanger ✔ ✔

K32150 S6 EVO BB Cable Guide ✔ ✔

K32160 S6 EVO/CAAD13 Down Tube Cable Guide ✔ ✔

K31000 Rim Brake Bridge ✔

K32010 Clip-in Brake Cable Stop QTY 2 ✔

KP449/ Rubber Brake Housing Grommets ✔

K32330

Dropout Cable Stop (QTY 1)

✔ ✔

K35028 1 1/4 Crb Headset No Crown Race ✔ ✔

K35038 1 3/8 Crb Headset No Crown Race ✔ ✔

K83019 Speed Release TA 10012 2Lead P1.0 119mm ✔

K83029 Speed Release TA 14212 2Lead P1.0 165mm ✔

K35059 SL Compression Plug with Top Cap ✔ ✔

KP197/SRM PF30 Bottom Bracket Cups And Bearings ✔ ✔

KB6180/ BB30 Bearing Blue (QTY 2) ✔ ✔

K22037 BB30 Bearing Blue (QTY 24) ✔ ✔

137369 Rev 1.

EnglishSuperSix EVO - Owner’s Manual Supplement

1 N·m

6 N·m

Y X

Di2

eTap

Di2

eTap

DROP

REACH

STEM

LENGTH

1 N·m

CRB-GEL

5 N·m

CRB-GEL

7.5mm

12.5mm

(2X)

(4X)

(1X)

2 N·m

KNØT / SAVE SystemBar (SuperSix EVO)

KNØT & SAVE Shared Parts

ID Description Part Number

DK28018 SystemBar Mounting Hardware

EK12018 SystemBar Computer and Light Mount

FK12008 SystemBar Computer and Light Insert

GK28039 HGRM KNOT/SAVE Handlebar Plug

HK28000 SuperSix Stem Spacers

137369 Rev 1.

EnglishSuperSix EVO - Owner’s Manual Supplement

Handlebar

ID Description Part Number

Width

(cm)

KNØT

CP2650U1038 38

CP2650U1040 40

CP2650U1042 42

CP2650U1044 44

SAVE

CP2600U1036 36

CP2600U1038 38

CP2600U1040 40

CP2600U1042 42

CP2600U1044 44

Stems

ID Description Part Number Stem Length

(mm)

Stem Rise

(degrees)

B1 KNØT Stems

CP2300U1080 80

- 17

CP2300U1090 90

CP2300U1010 100

CP2300U1011 110

CP2300U1012 120

CP2250U1080 80

-6

CP2250U1090 90

CP2250U1010 100

CP2250U1011 110

CP2250U1012 120

B2 SuperSix EVO

KNOT Stem Covers

K2804080 80

- 17

K2804090 90

K2804000 100

K2804010 110

K2804020 120

K2803080 80

-6

K2803090 90

K2803000 100

K2803010 110

K2803020 120

C SAVE Stems

CP2000U1080 80

- 6

CP2000U1090 90

CP2000U1010 100

CP2000U1011 110

CP2000U1012 120

CP2000U1030 130

CP2100U1080 80

+ 6

CP2100U1090 90

CP2100U1010 100

CP2100U1011 110

137369 Rev 1.

EnglishSuperSix EVO - Owner’s Manual Supplement

55mm

3mm

K35009

12.5mm

7.5mm

5 N·m

4 N·m

MAX.

KNØT SystemStem

• The KNØT stem ssupports internal brake hose and Di2 wire routing.

• Assembly of spacers is explained on the previous pages.

• Stem height may be set using combination of the 12.5mm and/or 7.5mm spacers.

• The maximum spacer stack height is 55mm. The example above depict 2x 12.5mm spacers and 4x 7.5mm

spacers, resulting in 55mm.

• The KNØT stem is to be used only with a Cannondale SystemBar handlebar such as SAVE or KNOT SystemBar.

• Use only the Cannondale SI Compression plug K35009.

Additional instruction at:

https://p.widencdn.net/w5njzq/134947-REV1-CDOMSSAVEKNOTSystemBar

CANNONDALE USA

Cycling Sports Group, Inc.

1 Cannondale Way,

Wilton CT, 06897, USA

1800726-BIKE (2453)

www.cannondale.com

CANNONDALE EUROPE

Cycling Sports Group Europe, B.V.

Hanzepoort 27, 7570 GC, Oldenzaal,

Netherlands +41 61 4879380

servicedeskeurope@

cyclingsportsgroup.com

CANNONDALE UK

Cycling Sports Group

Vantage Way, The Fulcrum,

Poole, Dorset, BH12 4NU

+44 (0)1202732288

sales@cyclingsportsgroup.

co.uk

WWW.CANNONDALE.COM

Topstone Owner’s Manual Supplement

134949 Rev. 1

EnglishSuperSix EVO - Owner’s Manual Supplement

CANNONDALE USA

Cycling Sports Group, Inc.

1 Cannondale Way,

Wilton CT, 06897, USA

1800726-BIKE (2453)

www.cannondale.com

CANNONDALE EUROPE

Cycling Sports Group Europe, B.V.

Hanzepoort 27, 7570 GC, Oldenzaal,

Netherlands +41 61 4879380

servicedeskeurope@

cyclingsportsgroup.com

CANNONDALE UK

Cycling Sports Group

Vantage Way, The Fulcrum,

Poole, Dorset, BH12 4NU

+44 (0)1202732288

sales@cyclingsportsgroup.

co.uk

WWW.CANNONDALE.COM

Topstone Owner’s Manual Supplement

134949 Rev. 1

CANNONDALE USA

Cycling Sports Group, Inc.

1 Cannondale Way,

Wilton CT, 06897, USA

1800726-BIKE (2453)

www.cannondale.com

CANNONDALE EUROPE

Cycling Sports Group Europe, B.V.

Hanzepoort 27, 7570 GC, Oldenzaal,

Netherlands +41 61 4879380

servicedeskeurope@

cyclingsportsgroup.com

CANNONDALE UK

Cycling Sports Group

Vantage Way, The Fulcrum,

Poole, Dorset, BH12 4NU

+44 (0)1202732288

sales@cyclingsportsgroup.

co.uk

WWW.CANNONDALE.COM

SuperSix EVO Owner’s Manual Supplement

137369 Rev. 1

Cannondale Super 6 Evo - 2020 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van Cannondale Super 6 Evo - 2020

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info