804898
172
Verklein
Vergroot
Pagina terug
1/220
Pagina verder
172
PART 3
STEP 6. Installing the Handlebar And Stem
138690 Rev2 (10/22)
Assembling Your Bike
Cannondale Bicycle Owner’s Manual
Stem to fork steering tube set up:
Be sure that any fork protection spacer has been removed from the dropouts, the bottom parts
of the fork.
Take the bike out of the carton and place the fork dropouts on the floor. Keep the fork aiming
forward. Pivot the stem so that it faces directly forward.
Find the stem clamping bolts on the back of the stem. These are the bolts that hold the stem/
handlebar assembly in place on the steering tube of the fork. Tighten these bolts using a torque
wrench to the torque value marked on the stem. If no torque marking is present, tighten to 7Nm.
Method B, Stem is attached to the handlebars:
Remove the plastic fork protector from the bottom of the fork.
Set the bike on the floor. The rear wheel is already installed. As you set the fork on the floor be
sure that the fork is aimed forward. This will make it possible for the bike to balance on the floor.
Confirm that the fork is oriented forward. One way to check this is that the brake caliper will be
on the left side of the bike.
Now that the weight of the bike is pushing down on the fork remove the top cap. This is done by
un-threading the top cap bolt with a 5 mm allen wrench. Once loose, remove the top cap and
bolt as an assembly and set it nearby.
172

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Cannondale Moterra Neo 2021 - Shimano E7000 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Cannondale Moterra Neo 2021 - Shimano E7000 in de taal/talen: Engels als bijlage per email.

De handleiding is 12.33 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Cannondale Moterra Neo 2021 - Shimano E7000

Cannondale Moterra Neo 2021 - Shimano E7000 Aanvulling / aanpassing - Nederlands - 24 pagina's

Cannondale Moterra Neo 2021 - Shimano E7000 Gebruiksaanwijzing - Nederlands - 102 pagina's

Cannondale Moterra Neo 2021 - Shimano E7000 Aanvulling / aanpassing - Deutsch - 24 pagina's

Cannondale Moterra Neo 2021 - Shimano E7000 Gebruiksaanwijzing - Deutsch - 102 pagina's

Cannondale Moterra Neo 2021 - Shimano E7000 Aanvulling / aanpassing - Deutsch - 30 pagina's

Cannondale Moterra Neo 2021 - Shimano E7000 Aanvulling / aanpassing - English - 24 pagina's

Cannondale Moterra Neo 2021 - Shimano E7000 Aanvulling / aanpassing - English - 30 pagina's

Cannondale Moterra Neo 2021 - Shimano E7000 Aanvulling / aanpassing - Français - 24 pagina's

Cannondale Moterra Neo 2021 - Shimano E7000 Gebruiksaanwijzing - Français - 102 pagina's

Cannondale Moterra Neo 2021 - Shimano E7000 Aanvulling / aanpassing - Français - 30 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info