779942
18
Verklein
Vergroot
Pagina terug
1/24
Pagina verder
16
137370 Rev 1.
EnglishCAAD13 - Owner’s Manual Supplement
Seat Binder Inspection
The internal seat binder system consists of a sliding clamp assembly and a nut base with double-
sided adhesive holding it to a special mating surface inside the seat tube. The sliding clamp parts
can be removed when the seat post is out.
Always clean the surfaces of the sliding clamp by wiping them with a clean dry lint-free shop
towel only. Do not soak the parts, as the internal washer is lubricated with grease. Solvents
will wash out the lubricant and the assembly will have to be regreased by disassembling it
completely.
NOTICE
If the nut base has become rotated, it should be removed and re-afxed to the frame.
The process is described in the Service Instruction for the parts kit. These instruction
are not provided in this manual. We reccommend that you have a Cannondale Dealer
perform the replacement.
Please Note: During first assembly of the nut base, it is important to not push on the 4mm allen
when tightening onto the seatpost. This can disengage the adhesive tape before proper bonding.
A poor bond can lead to misalignment. The 3M™ VHB™ Tape 5980 is pressure sensitive.
To inspect
1. To remove the seat post. See previous page.
2. To remove the sliding clamp, use a 4 mm
hex key and turn grub screw slowly clock-
wise until the clamp is disengaged from the
nut base.
3. Use the 4 mm hex to push the clamp out
through the seat tube opening.
4. Look into the frame opening. Use a pen
flashlight. Check the position of the nut
base. See CORRECT next page.
5. If the nut base is missing, or rotated or
damaged, a replacement is required. This
service should be performed by a Cannon-
dale Dealer.
6. Check the condition of the clamp. The
seat post face and frame contact surfaces
should be smooth. If they are not, the clamp
assembly should be replaced with a new
one.
7. Clean the parts and inside the seat tube
with a dry shop towel and re-apply grease
and carbon paste as indicated.
8. Returning the sliding clamp to the frame,
using the 4 mm hex to guide it to the nut
base.
9 Turn the grub screw counter-clockwise to
engage the nut base. Make sure it is enaged
suciently to easily insert the seat post into
the seat tube.
18

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Cannondale CAAD 13 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Cannondale CAAD 13 in de taal/talen: Engels als bijlage per email.

De handleiding is 27.4 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Cannondale CAAD 13

Cannondale CAAD 13 Aanvulling / aanpassing - Nederlands - 24 pagina's

Cannondale CAAD 13 Aanvulling / aanpassing - Deutsch - 24 pagina's

Cannondale CAAD 13 Aanvulling / aanpassing - Français - 24 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info