624614
100
Verklein
Vergroot
Pagina terug
1/106
Pagina verder
98 99
PART II
(continued from previous page)
OEM vs. Aftermarket Fork Parts Compatibility
Your bicycle was shipped by Cannondale with a
compatible component specification. The fork, the
handlebar stem, the headset parts (i.e. spacers,
bearings, crown race), and the compression
assembly are parts of the system. Other handlebar
stems, headset parts, and compression assemblies
available to you from sources other than Cannondale
may not be compatible.
The Cannondale SI Compression Assembly - KP017/
Only the SI Compression Assembly KP017/
may be used in Cannondale carbon forks with a
carbon steerer tube. You may not use any other
compression assemblies: star nuts, expanding
wedge, or stems with an integrated compression
device or anything else. Incompatible parts can
cause serious damage (cracking, splitting, scoring, or
deformation) of the steerer tube.
A double flanged star nut may only be used in a
carbon fork with an alloy (metal) steerer tube.
Aftermarket Handlebar Stems
Many handlebar stem designs from many dierent
manufacturers are available. It is impossible
to provide a listing of compatibility based on
availability. Don’t think availability means
compatibility. Here are some factors aecting
compatibility:
1. A compatible handlebar stem must be
compatible for use with the Cannondale SI
Compression Assembly KP017/.
2. The stem must be designed for use with carbon
forks having an 1 1/8 steerer tubes, without
adaptation or alteration of the stem or the
steerer tube. The surfaces must mate correctly.
3. The inside diameter of the stem clamping
surface must be smooth, free of burrs. It
must fit the outside diameter of the steerer
tube snugly with the clamp bolts completely
loosened. The stem surfaces in contact with the
steerer must be smooth, without interruptions
(large openings or holes). When clamped to the
recommended tightening torque, the stem must
not pinch or cause other impressions or cuts in
the steerer tube. Smooth and remove any burrs
with fine sand paper (220 is ideal).
4. Wedge clamping stems must not be used.
What You Have To Know When Installing Or
Adjusting Any Handlebar Stem
The steerer tube length for any Cannondale carbon
fiber fork with a carbon steerer is limited to the
MAXIMUM STACK HEIGHT of 55mm. This aects
the height adjustment of the stem. No spacers may
be used on top of a stem. The stack measurement
method is shown on the following page. If the
steerer tube is cut to accommodate a lesser spacer
stack height, please observe the following:
1. Cutting must be done by a professional bike
mechanic experience d with carbon components.
2. To produce a straight cut, use a fork cutting jig
(e.g., Park Tool SG-6). See http://www.parktool.
com/tools/SG_6.shtml.
3. Do not clamp steerer tube directly in vice jaws
and/or cut the steerer free hand. Vice jaws
can crack or damage the surface of the steerer.
Locate the jig on the cut o end of the steerer
tube to avoid placing a clamping force on the
steerer tube which could produces cracks.
Alternatively, you can clamp the steerer in
grooved wooden blocks positioned in vice. Do
not over-tighten the vice.
4. Additionally, when cutting a carbon steerer
tube, use composites hacksaw blade (tungsten
carbide gritted) or a very fine toothed (36
toothed) new blade. To minimize fraying of the
carbon fibers, wrap the area of cut with masking
tape. Make only one clean complete cut. Do not
scratch, score, or mark the steerer tube surface
other than the complete cut. Scratching, scoring
or making other marks on the tube surfaces
other than the complete cut, or cutting the
steerer tube to an incorrect length for a specific
stem/headset can compromise the strength of
the steerer tube. After the steerer tube is cut,
round the cut edges smooth and remove any
burrs with fine sand paper (220 is ideal).
WARNING
We urge you to consult closely with your local
Cannondale Dealer. This will help to make sure
that any aftermarket choices you make are
compatible with your bike’s OEM parts and will
not cause serious damage to your bike.
100

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Cannondale 2011 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Cannondale 2011 in de taal/talen: Engels als bijlage per email.

De handleiding is 3,79 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Cannondale 2011

Cannondale 2011 Gebruiksaanwijzing - Nederlands - 104 pagina's

Cannondale 2011 Gebruiksaanwijzing - Deutsch - 104 pagina's

Cannondale 2011 Gebruiksaanwijzing - Français - 104 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info