44
EN
CHAPTER 11
CUSTOMER AWARENESS
A guide environmentally friendly and economic use of your
appliance.
MAXIMISE THE LOAD SIZE
Achieve the best use of energy,water, detergent and time by
using the recommended maximum load size.
Save up to 50% energy by washing a full load instead of 2 half
loads.
DO YOU NEED TO PRE-WASH?
For heavily soiled laundry only!
SAVE detergent, time, water and between 5 to 15% energy
consumption by NOT selecting Prewash for slight to normally
soiled laundry.
IS A HOT WASH REQUIRED?
Pretreat stains with stain remover or soak dried in stains in
water before washing to reduce the necessity of a hot wash
programme.
Save up to 50% energy by using a 60°C wash programme.
WASHING
VARIABLE CAPACITY
This washing machine automatically adapts the level of the
water to the type and quantity of washing. In this way it is also
possible to obtain a “personalized” wash from an energy
saving point of view.
This system gives a decrease in energy consumption and a
sensible reduction in washing times.
Let us suppose that the washing consists of HEAVILY SOILED
COTTON (tough stains should be removed with the special
cream).When only a limited number of articles have stains
which require treatment with liquid bleaching agents,
preliminary removal of stains can be carried out in the
washing machine. Pour the bleach into the special
compartment and set the knob (L) on the special
programme “PRE-WASH STAIN REMOVAL” .
When this phase has terminated add the rest of the washing
and proceed with a normal wash on the most suitable
programme.
It is advisable not to wash a load made up entirely of articles
in towelling fabric which absorb a lot of water and become
too heavy.
The maximum load for heavy fabrics is 3,5 kg,while, in the
case of delicate fabrics, it is advisable not to exceed 2 kg (1
kg in the case of machine washable articles in “Pure New
Wool”) so as to avoid the formation of creases which may be
difficult to iron. A net bag should be used for particularly
delicate fabrics.
cl
