Handleiding Candy FCTS825XL (pagina 8 van 20) (Duits, Engels)

703576

Verklein

Vergroot

Pagina terug

1/20

Pagina verder

4. Oven cleaning and maintenance

4.1 General notes on cleaning

The lifecycle of the appliance can be extended through regular

cleaning. Wait for the oven to cool before carrying out manual

cleaning operations. Never use abrasive detergents, steel wool or

sharp objects for cleaning, so as to not irreparably damage the

enamelled parts. Use only water, soap or bleach-based

detergents (ammonia).

GLASS PARTS

OVEN WINDOW SEAL

If dirty, the seal can be cleaned with a slightly damp sponge.

ACCESSORIES

Clean accessories with a wet, soapy sponge before rinsing and

drying them: avoid using abrasive detergents.

DRIP PAN

After using the grill, remove the pan from the oven. Pour the hot fat

into a container and wash the pan in hot water, using a sponge and

It is advisable to clean the glass window with absorbent kitchen

towel after every use of the oven. To remove more obstinate

stains, you can use a detergent-soaked sponge, well wrung out,

and then rinse with water.

washing-up liquid.

If greasy residues remain, immerse the pan in water and

detergent. Alternatively, you can wash the pan in the dishwasher

or use a commercial oven detergent. Never put a dirty pan back

into the oven.

It is recommended to clean the cavity bottom after 5-10 steam

cooking cycles.

2. Wait for 30 minutes at room temperature.

Clean the oven door with a damp cloth or sponge only.

Do not use steel wool, acids or abrasive materials as they can

damage the oven surface. Clean the oven control panel with the

same precautions.

3. Clean the oven using soft cloth and water.

Dry it with a soft cloth.

STAINLESS STEEL ORALUMINIUMAPPLIANCES

1. Pour 300 ml of white vinegar into the cavity bottom.

NOTE: Type of vinegar:%5

CLEANING THE CAVITY BOTTOM

Follow these steps to clean the limestone residue from the cavity

bottom.

REMOVAL OF THE OVEN WINDOW

1. Open the front window.

2. Open the clamps of the hinge housing on the right and left side

of the front window by pushing them downwards.

3. Replace the window by carrying out the procedure in reverse.

4.3 Maintenance

EN 08

300 ml

5. After 30 minutes switch off the program and allow the oven to

cool down.

2. Set the oven function to Static ( )or Bottom ( )heater

Make sure that the appliance is cool before you touch it.

Care must be taken with all hot surfaces as there is a risk of burns.

The Aquactiva procedure uses steam to help remove remaining

fat and food particles from the oven.

Warning:

3. Set the temperature to theAquactiva icon

1. Pour 300 ml of water into the Aquactiva container at the bottom

of the oven.

6. When the appliance is cool, clean the inner surfaces of the oven

with a cloth.

4.Allow the program to operate for 30 minutes.

Use distilled or drinkable water.

4.2 Aquactiva Function

3.3 Using The Steam Function

4. Set the function you prefer to cook with steam.

CAUTION: Do not refill the cavity bottom with water during cooking or

when the oven is hot.

Released steam can cause burns:

Open the oven door carrefully to avoid injury after using a cooking

function with steam.

1. Open the oven door

Steam function lets you have better hummidity during cooking cycle.

We recommend alternating steam cooking with traditional cooking.

2. Fill the cavity bottom using max. 300 ml water. Fill the cavity bottom

with water only when the oven is cold.

WARNING: Risk of burn and damage to the appliance.

3. Put food in the appliance and close the oven door.

5. Turn the knob for the temperature to select a temperature.

6. Wait five minutes for preheating. Then press the steam oven button.

The steam oven button works with the function.

7. To turn the appliance off switch the function and temperature knob

to zero positions.

8. Remove water from the cavity bottom. Clean the drip tray after

every cooking cycle. Clean the drip tray after every cooking cycle.

Please see chapter 4.1 for cleaning instrucitons.

REMOVALAND CLEANING OF THE SIDE RACKS

1. Unscrew the bolt in an anti-clockwise direction.

2. Remove the side racks by pulling them towards you.

4. Having cleaned the side racks, put them back in and reinsert the

bolts, ensuring that they are fully tightened.

3. Clean the side racks in a dishwasher or with a wet sponge and

then dry them immediately.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Candy FCTS825XL Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info