Attention
This dishwasher is equipped with an anti-overflow safety device
which works even when power is switched off, and if the water
level is too high the supply will automatically be closed off.
Important
To ensure the correct operation of the anti-overflow safety
device, it is recommended not to move or to tilt the dishwasher
during operation.
If it is necessary to move or to tilt the dishwasher, first make
sure the washing cycle is finished and that no water is left in
the tank.
To set the programme, turn the dial clockwise until the pointer
( ) indicates the symbol of the required programme. Then
press the On/Off button. Ensure that the water supply is turned
on and the door is closed properly.
“65°C” button
This button is an option available on the UNIVERSAL
INTENSIVE 65°C and DAILY INTENSIVE 65°C programmes
which will increase the temperature of the water of washing
from 50°C to 65°C.
Half load button
By pressing this button it is possible to wash a small quantity
of crockery using only the upper basket for dishes and cutlery
in the bottom basket. This reduces water and energy
consumption and requires a smaller quantity of detergent as
well.
Selecting the programme and special functions
Use in conjunction with programme guide
9
EN 50242 place load
Capacity with pans and dishes
Water supply pressure
Fuse
Power input
Supply voltage
12
8 persons
Min. 0,08 - Max 0,8 MPa
(see rating plate)
(see rating plate)
(see rating plate)
Height
Depth
Width
Depth with door open
cm
cm
cm
cm
with working top
85
60
60
120
Description of the controls
Technical Data
Dimensions:
without working top
82
55,6
59,8
117
A On/off button
B “65°C” button
C Half load button
F Door handle
G Programme selector
H Mains indicator light
I Low level salt indicator light
8
AB C F G
IH
