802425
4
Verklein
Vergroot
Pagina terug
1/68
Pagina verder
4
19.Always use new batteries to replace the drained batteries in the remote control.
20.Do not move the device when the inner tank is filled with water.
21.Do not place any objects on the device.
22.The device can be used only with properly working ventilation.
2. Do not get wet the device or wet the area around the device. If moisture appears, reduce the efficiency of the humidifying function.
3. Do not allow absorbent materials such as carpets, curtains, tablecloths to get wet.
23. To provide additional protection, it is advisable to install a residual current device (RCD)
in the electric circuit with a rated residual current not exceeding 30mA. Ask an electrician
for this.
4. Never leave water in the tank when the device is not in use.
5. During filling and cleaning, disconnect the device from the mains.
Before first use
6. Clean the device and water tank before using it again.
• WARNING: When the water is not replaced and the tank is not properly cleaned every 3 days, microorganisms that may be present in
the water or in the environment where the device is used or stored may develop in the water tank and be blown out to the surroundings.
This can cause a very serious health risk.
1. It should be remembered that a high level of humidity may favor the development of biological organisms in the environment.
2. Slide out the water tank (7) on the back of the machine and pour in the water. Be careful not to exceed the maximum level.
8.1 - Air speed adjustment button: slow, medium, fast.
8.3 - The button causes oscillation of vertical louvers that ensure even distribution of the cooled air stream. The horizontal blinds do not
move automatically - you can move them manually.
8.5 - The button allows you to change the blower mode. In addition to the normal mode, "NATURE" and "SLEEP" are available.
"NATURE" mode imitates the action of natural wind by changing the blower speed about every 10 seconds and successively
changing the speed of the blower between slow, medium to fastest. On the other hand, setting the “SLEEP” mode will result in
the device switching off after a specified time. If we set the slow speed, the device will turn off automatically after 30 minutes. If
we set the medium speed, after 30 minutes the device will reduce the speed to slow, and after another 30 minutes it will turn off
automatically. If we set the fastest speed, the device after 30 minutes will reduce the speed to medium, then after another 30
minutes it will slow down slowly, and after another 30 minutes it will turn off automatically.
DESCALING
• WARNING: Every three days, empty the water tank and top up with clean water. Before refilling, clean the tank with fresh tap water or
using detergents. Remove any scale, deposits or film that has formed on the sides of the tank and on the interior surfaces. After
washing, wipe all surfaces dry.
8.6 - The display shows the room temperature level.
CLEANING AND MAINTENANCE
1.Perform the descaling procedure in accordance with the instructions of the descaling agent specified by the manufacturer.
7. Water tank 8. Control panel 9. Remote control
4. Descaling only the water tank with the device turned off.
DESCRIPTION OF THE DEVICE
2.Use descaling agents intended for this purpose.
1. After unpacking the device from the packaging, mount the wheels and place the device on a dry, flat surface, then connect the power
plug.
8.2 - The button reduces the temperature of the air by activating the water pump. Two ice containers (10) are included in the set. To use
them, fill them with tap water up to ¾ height and freeze. Then insert one or both of them into the water tank (7). In order to blow
out cool air, there must be water inside the tank (7). During operation, periodically check the water level and add water. Turning
on the button simultaneously activates the air humidification function.
8.8 - The button turns off the control panel lighting.
A noticeable reduction in the temperature of the exhaust air occurs after putting into the water tank 2 plastic containers attached to the
product previously filled with water and frozen in the freezer. It is recommended to fill the tank with cold tap water.
4. To end the operation of the device, switch off the device with the 8.4 button.
1. Air outlet 2. Water level indicator 3. Wheels
4. Holder 5. Filter mesh 6. Power cord
3. Carry out the descaling procedure at least every 3 months.
10. Two ice containers
8.4 - Button for switching the device on and off.
8.7 - The button allows you to program the operation time of the device from 1 to 12 hours. If you don't use button 8.7, the device will
work until you turn it off manually.
USING THE APPLIANCE
3. Turn on the device with the 8.4 button on the control panel or remote control. Manual operation of the device is identical to operation
via a remote control.
It is recommended to clean the device with a soft, dry cloth. Do not use any chemical solvents as they may permanently damage or
deform the surface. If the device will not be used for three months or longer, remove the batteries from the remote control. Pour
water out of the tank before storage. Dry the device to avoid moisture damage. Set the 8.1 button to the highest fan speed, the
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Camry CR 7908 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Camry CR 7908 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Deens, Zweeds als bijlage per email.

De handleiding is 3.38 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info