Rate: 138 g/h (1,9 kW) - injector n° 015208
Category: butane direct pressure
Thank you for choosing the Campingaz®
PARTY
GRILL® MAX or PARTY WOK or PARTY GRILL® Combo.
The purpose of these instructions is to enable you to
use your Campingaz®
ARTY GRILL® MAX or PARTY
WOK or PARTY GRILL® Combo
correctly and in com-
plete safety.
Please read them carefully to familiarise yourself with
the equipment prior to assembling the gas cylinders.
Keep these instructions in a safe place so that you
can refer to them if needed.
This equipment should only be used outside premises
and kept away from all inflammable materials.
Do not use equipment which leaks, functions incor-
rectly or is damaged. Return it to your retailer who will
inform you of your nearest after-sales service.
Never modify this equipment or use it for purposes for
which it is not intended.
- Remove the stove from its packaging (Fig.1), remove
pan support (2)(Fig.2).
- Assemble handles on each side of the stove by inser-
ting the screws through the holes provided for this
purpose (Fig.3). Screw in tightly until the handles no
longer move. Make sure that the handles stand proud
either side of the grill.
(If the current cylinder is empty, read paragraph F -
Removing or changing the cylinder).
When installing or changing a gas cylinder, always
operate in a well-ventilated location, preferably outsi-
de, never near a flame, heat source or spark (cigaret-
te, electric apparatus, etc.) and far away from other
people and inflammable materials.
- Check that the tap (10) is firmly closed by turning the
wheel clockwise: arrow direction "-" (Fig.10).
- Place the cylinder on a firm, horizontal surface and
remove the cap.
- Screw tube (5)(Fig.5) onto the cylinder (18) holding it
by tube grip (11). Make sure you hold the tube verti-
cal when screwing it in to avoid damaging the gas
cylinder. Screw the tube right into valve (12) on the
cylinder. Hand tighten , assembly
should be easy.
- Screw bowl (1)(Fig.5) onto tube (5). Hand tighten
without forcing.
In case of leakage (gas smell before opening the
valve), put immediately the equipment outside, in a
well-ventilated area, without inflammation source,
where it will be possible to locate and stop the lead. If
you wish to check the tightness of the equipment, do it
outside. Do not try to locate a leak with a flame, use
gas leak detection liquid.
Party Grill® Max Party Grill®
Combo
- Position pan support (2) in the slots in bowl (13) as
shown in figure 6.
- Mount grease trap (4) on bowl (1) as shown in figure 7.
- Position grill (6)(Fig.7) and
check that pouring spout (14) is positioned correctly
over the grease trap (4).
- The equipment is ready for use
The grill plate may be oiled lightly to prevent food stic-
king during cooking.
Party Wok Party Grill® Combo
- Position wok (7)(Fig.8) on the bowl, matching the
arrows on the wok with those on bowl (A). Check that
the wok is good and stable on the equipment.
- The equipment is ready for use
Party Grill® Max, Party Wok
or
Party
Grill® Combo
- Position pan support (2) in the slots in bowl (13) as
shown in figure 6.
- The equipment is ready for use
