497552
3
Verklein
Vergroot
Pagina terug
1/12
Pagina verder
ENGLISH
Docking Station for iPod
User’s manual
2
Your music +our passion
iD50
2
Contents
Introduction .............................................................................2
Important safety instructions ................................................3
Limited warranty .....................................................................4
Rear panel ...............................................................................5
Connections.............................................................................5
Front panel ..............................................................................6
Remote control........................................................................7
Operating instructions ............................................................8
Technical specifications .......................................................10
Troubleshooting.....................................................................11
Thank you for purchasing the Cambridge Audio iD50
Audiophile Docking Station for iPod. We are confident that
it will provide you with many years of listening pleasure.
The iD50 enables you to get the very best audio and video
quality from your iPod. A ground sensing pseudo-balanced
noise cancelling scheme and buffered audio outputs extract
the maximum information possible.
Gold-plated RCA/Phono connections allow the iD50 to be
used with a high quality separates system for true
audiophile performance.
In addition, you can use your television to both browse your
iPod via the iD50’s simple On-Screen Display and view video
content. An RS232 interface is also included for custom
installation use.
The iD50 supports both Simple and Advanced modes of
operation. In Simple Mode, the dock is in an active standby
state to allow charging of the iPod and output of the audio
via the iD50. The iPod’s own display is active and it is
controllable via the supplied remote control or its own front
panel and touch-wheel.
In Advanced Mode, the iPod can be controlled and browsed
using the remote control and the iD50’s On-Screen Display
via a suitable TV. Audio and video are available via the iD50
connections and charging of the iPod can be turned on or
off.
Please do not compromise on the quality of interconnects
you use with this product. Naturally, we particularly
recommend cables from the Cambridge Audio range,
designed to the same exacting standards as this product.
Contact your dealer for details.
Thank you for taking the time to read this manual; we
recommend you keep it for future reference.
Matthew Bramble
Cambridge Audio Technical Director
and the Docking Station design team
Introduction
Like all Cambridge Audio products, the
iD50 adheres to three core principles –
stunning performance, ease of use and
incredible value.
Make sure you register your purchase!
Visit: www.cambridgeaudio.com/sts
By registering, you’ll be the first to know about:
GFuture product releases
GSoftware upgrades
GNews, events and exclusive offers plus
competitions!
This guide is designed to make installing and using this
product as easy as possible. Information in this document
has been carefully checked for accuracy at the time of
printing; however, Cambridge Audio's policy is one of
continuous improvement, therefore design and specifications
are subject to change without prior notice.
This document contains proprietary information protected
by copyright. All rights are reserved. No part of this manual
may be reproduced by any mechanical, electronic or other
means, in any form, without prior written permission of the
manufacturer. All trademarks and registered trademarks
are the property of their respective owners.
“Made for iPod” means that an electronic accessory has
been designed to connect specifically to iPod and has been
certified by the developer to meet Apple performance
standards.
Apple is not responsible for the operation of this device or
its compliance with safety and regulatory standards.
© Copyright Cambridge Audio Ltd 2008
iTunes, iPod and the Apple logo are trademarks of Apple
Inc., registered in the U.S. and other countries.
3
iD50
ENGLISH
Important safety instructions
For your own safety please read the following important safety
instructions carefully before attempting to connect this unit to the
mains power supply. They will also enable you to get the best
performance from and prolong the life of the unit:
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with
the manufacturer's instructions.
8. Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-
type plug. A polarized plug has two blades with one wider than the
other. A grounding-type plug has two blades and a third grounding
prong. The wide blade or the third prong are provided for your
safety. If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched,
particularly at plugs, convenience receptacles and the point
where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use with only the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when
moving the cart/ apparatus combination to avoid injury
from tip-over.
13. Unplug this apparatus during lightning storms or when unused for
long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, such
as the power-supply cord or plug having been damaged, liquid has
been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
WARNING – To reduce the risk of fire or electric shock, do not expose
this unit to rain or moisture.
The unit must be installed in a manner that makes disconnection of
the mains plug from the mains socket outlet (or appliance connector
from the rear of the unit) possible. Where the mains plug is used as
the disconnect device, the disconnect device shall remain readily
operable. Only use the mains cord supplied with this unit.
Please ensure there is ample ventilation (at least 10cm clearance all
round). Do not put any objects on top of this unit. Do not situate it on
a rug or other soft surface and do not obstruct any air inlets or outlet
grilles. Do not cover the ventilation grilles with items such as
newspapers, tablecloths, curtains, etc.
This unit must not be used near water or exposed to dripping or
splashing water or other liquids. No objects filled with liquid, such as
vases, shall be placed on the unit.
The lightning flash with the arrowhead symbol within an equilateral
triangle is intended to alert the user to the presence of un-insulated
‘dangerous voltage’ within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
instructions in the service literature relevant to this appliance.
The symbol on this product indicates that it is of CLASS II
(double insulated) construction.
WEEE symbol
The crossed-out wheeled bin is the European Union symbol
for indicating separate collection for electrical and electronic
equipment. This product contains electrical and electronic
equipment which should be reused, recycled or recovered
and should not be disposed of with unsorted regular waste. Please
return the unit or contact the authorised dealer from whom you
purchased this product for more information.
CE mark
This product complies with European Low Voltage
(2006/95/EC) and Electromagnetic Compatibility
(89/336/EEC) Directives when used and installed according to this
instruction manual. For continued compliance only Cambridge Audio
accessories should be used with this product and servicing must be
referred to qualified service personnel.
C-Tick mark
This product meets the Australian Communications
Authority’s Radio communications and EMC requirements.
Ross Test Stamp
This product meets Russian electronic safety approvals.
FCC regulations
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO
OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS
TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER
AUTHORITY TO OPERATE THE EQUIPMENT.
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Re-orient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
4
Cambridge Audio warrants this product to be free from defects in
materials and workmanship (subject to the terms set forth below).
Cambridge Audio will repair or replace (at Cambridge Audio's option)
this product or any defective parts in this product. Warranty periods
may vary from country to country. If in doubt consult your dealer and
ensure that you retain proof of purchase.
To obtain warranty service, please contact the Cambridge Audio
authorised dealer from which you purchased this product. If your
dealer is not equipped to perform the repair of your Cambridge Audio
product, it can be returned by your dealer to Cambridge Audio or an
authorised Cambridge Audio service agent. You will need to ship this
product in either its original packaging or packaging affording an equal
degree of protection.
Proof of purchase in the form of a bill of sale or receipted invoice,
which is evidence that this product is within the warranty period, must
be presented to obtain warranty service.
This Warranty is invalid if (a) the factory-applied serial number has
been altered or removed from this product or (b) this product was not
purchased from a Cambridge Audio authorised dealer. You may call
Cambridge Audio or your local country Cambridge Audio distributor to
confirm that you have an unaltered serial number and/or you made a
purchase from a Cambridge Audio authorised dealer.
This Warranty does not cover cosmetic damage or damage due to acts
of God, accident, misuse, abuse, negligence, commercial use, or
modification of, or to any part of, the product. This Warranty does not
cover damage due to improper operation, maintenance or installation,
or attempted repair by anyone other than Cambridge Audio or a
Cambridge Audio dealer, or authorised service agent which is
authorised to do Cambridge Audio warranty work. Any unauthorised
repairs will void this Warranty. This Warranty does not cover products
sold AS IS or WITH ALL FAULTS.
REPAIRS OR REPLACEMENTS AS PROVIDED UNDER THIS WARRANTY
ARE THE EXCLUSIVE REMEDY OF THE CONSUMER. CAMBRIDGE AUDIO
SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL
DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY IN
THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY LAW, THIS
WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS AND
IMPLIED WARRANTIES WHATSOEVER INCLUDING, BUT NOT LIMITED
TO, THE WARRANTY OF MERCHANTABILITY AND FITNESS FOR A
PRACTICAL PURPOSE.
Some countries and US states do not allow the exclusion or limitation
of incidental or consequential damages or implied warranties so the
above exclusions may not apply to you. This Warranty gives you specific
legal rights, and you may have other statutory rights, which vary from
state to state or country to country.
For any service, in or out of warranty, please contact your dealer.
Limited warranty
Ventilation
IMPORTANT – The unit will become hot when in use. Do not stack
multiple units on top of each other. Do not place in an enclosed area
such as a bookcase or in a cabinet without sufficient ventilation.
Ensure that small objects do not fall through any ventilation grille. If
this happens, switch off immediately, disconnect from the mains
supply and contact your dealer for advice.
Positioning
Choose the installation location carefully. Avoid placing it in direct
sunlight or close to a source of heat. No naked flame sources, such as
lighted candles, should be placed on the unit. Also avoid locations
subject to vibration and excessive dust, cold or moisture. The unit can
be used in a moderate climate.
This unit must be installed on a sturdy, level surface. Do not place in a
sealed area such as a bookcase or in a cabinet. Do not place the unit
on an unstable surface or shelf. The unit may fall, causing serious
injury to a child or adult as well as serious damage to the product. Do
not place other equipment on top of the unit.
Due to stray magnetic fields, turntables or CRT TVs should not be
located nearby due to possible interference.
Electronic audio components have a running in period of around a
week (if used several hours per day). This will allow the new
components to settle down and the sonic properties will improve over
this time.
Power sources
The unit should be operated only from the type of power source
indicated on the marking label. If you are not sure of the type of power-
supply to your home, consult your product dealer or local power
company.
To turn the unit off, unplug it from the mains socket.
Overloading
Do not overload wall outlets or extension cords as this can result in a
risk of fire or electric shock. Overloaded AC outlets, extension cords,
frayed power cords, damaged or cracked wire insulation and broken
plugs are dangerous. They may result in a shock or fire hazard.
Be sure to insert each power cord securely. To prevent hum and noise,
do not bundle the interconnect leads with the power cord or speaker
leads.
Cleaning
To clean the unit, wipe its case with a dry, lint-free cloth. Do not use
any cleaning fluids containing alcohol, ammonia or abrasives. Do not
spray an aerosol at or near the unit.
Battery disposal
Please dispose of any discharged batteries according to local
environmental/electronic waste disposal guidelines.
Loudspeakers
Before making any connections to loudspeakers, make sure all power
is turned off and only use suitable interconnects.
Servicing
These units are not user serviceable. Never attempt to repair,
disassemble or reconstruct the unit if there seems to be a problem.
A serious electric shock could result if this precautionary measure is
ignored. In the event of a problem or failure, please contact your
dealer.
5
iD50
ENGLISH
Stereo Audio Outputs (RCA/Phono)
Connect the iD50 to any suitable amplifier, TV, AV Receiver
or stereo system using a stereo audio cable (RCA/Phono to
RCA/Phono). Any line level input (which may be labelled CD,
Tape, Aux, etc.) is suitable.
RS232 terminal
For custom installation use, connect the iD50 to an external
multi-room control system using a 3.5mm stereo jack to
RS232 D9 cable. Please refer to the Cambridge Audio
website for full details of the dock control protocol.
Composite Video Out terminal
To use the iD50’s on-screen display, and view video content,
connect the iD50 to a TV/monitor using a suitable 75 ohm
RCA/Phono cable designed specifically for Composite video.
S-Video Out terminal
A higher quality alternative to the Composite connection,
connect the iD50 to a TV/monitor using a suitable S-Video
cable.
Note: S-Video connectors are polarised and only fit one
way up. Carefully rotate the plug until you find the right
orientation before inserting.
7.5V DC In terminal
Connect the iD50 to the supplied worldwide voltage AC
adaptor only.
The supplied adapter may be used worldwide with electricity
supply voltages 100V-240V 50/60Hz.
Note: For your convenience, the iD50 is supplied with a
combined Stereo RCA/Phono/Composite Video cable.
However, for the best quality audio and video output, we
recommend upgrading to dedicated interconnects.
1
2
3
4
5
Rear panel
PSU 7.5V In
R - Audio Out - L VideoRS232 S-Video
1 2 3 4 5
Connections
PSU 7.5V In
R - Audio Out - L VideoRS232 S-Video
In
In
OR
Amplifier
iD50
TV/Monitor
In
Ensure all necessary connections from the iD50 are in place
before connecting the power supply.
iD50 power supply
Red White Yellow
S-Video
(cable not supplied)
Stereo audio cable
(RCA/Phono-
RCA/Phono)
Video phono cable
(RCA-RCA)
Composite video
(Yellow)
Stereo RCA/Phono
(Red, White)
The iD50’s audio outputs can be connected to a stereo
system or suitable TV with audio inputs and built-in
amplification as shown above. For the best quality, we
recommend use of a good quality hi-fi separates system.
Note: playback volume is always adjusted via your
amplifier or TV as appropriate.
66
Front panel
Connections (continued)
1
23
Remote sensor
Receives IR commands from the supplied remote, an Apple
iPod remote or a Cambridge Audio Azur Navigator ‘iPod-
compatible’ remote. A clear and unobstructed line of sight
between the remote control and the sensor is required.
Docking adaptor slot
Fit the required docking adaptor to support your type of iPod
(two are supplied, new iPod models also come with a
suitable new adaptor).
iPod compatibility
The iD50 is able to communicate with and control the
following iPod models:
iPod nano (1st, 2nd, 3rd and 4th generation)
iPod (4th generation, photo and 5th generation)
iPod mini
iPod classic
iPod touch (1st and 2nd generation)
iPhone (flight mode recommended)
Dock connector
Gently insert your iPod into the dock. Excessive force may
damage the connector.
1
2
3
Carefully place iPod into the iD50 docking station.
The iD50 is supplied with adaptors for the 3G iPod nano
and iPod classic models.
Depending on your type of iPod, you may need to use the
alternative docking adaptor that will have been supplied
with your iPod. Simply clip this in place as shown below:
Note: To prevent damaging the dock connector, do not twist
the iPod when inserting it or removing it.
7
iD50
ENGLISH
Remote control
Backlight
Turns the iPod backlight on for about 10
seconds.
Standby/Mode
Pressing this button both brings the dock
in and out of Standby and selects the
iD50’s Simple or Advanced modes for
controlling the iPod.
In Standby mode there will be a dim blue
LED visible through the front IR window.
Pressing the button when the dock is
in Standby wakes up the iPod and dock
(in the mode it was last in). The blue LED
visible through the front IR window turns
on more brightly.
Pressing the button again will then
toggle the dock back and forth between
Simple and Advanced modes.
In Simple Mode the iPod is controllable
either by remote control or its own front
panel and touch wheel. The iPod’s own
display is active and can be used to view
and select content, etc.
In Advanced Mode, the iPod is instead
fully controlled and browsed via the
iD50’s On-Screen Display (OSD) on a
suitable TV. The iPod’s own display, front
panel and touch wheel are not used. A
Cambridge Audio logo and “Ready to
Disconnect” appears on the iPod’s
display and the iD50’s OSD becomes
active via the video outputs. The blue LED visible through
the front IR window is also on brightly in this mode.
Note: the iD50 will take a few seconds to intialise the iPod
when entering this mode.
In either mode, to put the iD50 and iPod into Standby simply
press and hold the button on the remote or the Play/Pause
key on the iPod itself for about three seconds.
Menu
Press to go back to the previous menu. Hold down to return
to the Home menu (Advanced Mode only).
Navigate
Navigates up/down through the menus.
Skip
Press to select previous or next song.
Hold down to fast-forward or rewind
songs.
Select
Press to select a menu item.
Repeat
Press to cycle through the repeat modes
in Simple Mode. In Advanced Mode, the
settings menu will be shown on the OSD
showing the current status of this
function. Press the button again to select
a new repeat function.
Play/Pause
Press to play or pause video or audio
playback.
Shuffle
Press to select song shuffle in Simple
Mode. In Advanced Mode, the settings
menu will be shown on the OSD showing
the current status of this function. Press
the button again to select a new shuffle
function.
Album
Simple Mode: Press to select previous or
next album.
Advanced Mode: Press to view the previous or next page of
the menu (for speedier navigation).
Playlist
Simple Mode only: Press to skip to the next playlist on the
iPod (if you have created playlists).
Note: The iD50 is also compatible with Apple’s own iPod
remote and some Cambridge Audio Azur Navigator remote
controls supplied with our products. Currently almost all of
the remotes in our Azur range are ‘iPod-compatible’.
Please refer to the remote control section of the Azur
product’s manual for more information.
88
Simple Mode
Simple Mode allows you to browse and control your iPod
without requiring a television. In this case, the listener
simply uses the iPod’s own display and front panel/touch
wheel or the supplied remote control to navigate the iPod.
Press on the remote control to toggle between Simple and
Advanced modes. In Simple Mode, the dock’s blue LED will
be bright and you will see the iPod’s standard menu appear
on its screen.
You can now fully control the iPod using the remote control.
Use the Navigator buttons to highlight either the next
or previous item in the current menu.
Press to choose that item.
Press to return to the previous menu.
If you wish to use the iD50 for viewing videos or photos on
your television and you have a suitable iPod, ensure that
Video Out is enabled on your iPod. This is in the Video/
Settings menu.
Note: not all iPod models support video playback.
Operating instructions
Advanced Mode
Advanced mode allows the user to navigate through the
iPod’s audio and video content (if your iPod supports video
playback) whilst displaying the information on your
television.
In Advanced Mode, the dock’s blue LED will be bright and
you will see the Cambridge Audio logo and “Ready to
Disconnect” on the iPod’s screen. Toggle between Advanced
and Simple modes by pressing .
Configuring your iD50
The iD50 supports both PAL and NTSC standards. It will have
been preset for the TV system in your area.
If you can’t see the iD50 menu on your television, or move
country and find the image is distorted, it may be a good
idea to ensure the dock is in the correct video mode.
To toggle the display mode between PAL and NTSC:
1. Remove the iPod from the dock.
2. Press the four navigator keys one at a time ( , , ,
then ).
The dock will shut down and restart in the new video mode.
Navigation
Your iPod’s content is displayed on the TV screen in a simple
menu format. It is very similar in layout to the iPod’s own
user interface.
Use the and buttons to move the highlight bar to the
desired item. Press to choose the item. If there are more
than eight items in the current menu, you can repeatedly
press the or buttons until you reach the previous or
following page.
Alternatively you can use Album to jump directly to the
next page.
If you wish to return to the previous menu, press the Me
button.
1
2
9
iD50
ENGLISH
Menus
When the iPod is first inserted, the television will display the
following options:
Music
Select to browse the audio content of your iPod.
Videos
This option enters a sub-menu, which contains your iPod’s
video content. Please note that not all iPod models support
this feature.
Settings
Use this option to change the Shuffle or Repeat settings,
configure the video output, or to enable or disable iPod
charging. For more information on settings, please see
Section Five below.
Shuffle Songs
Selecting this option will instantly play a random selection of
your iPod’s music.
Now Playing
While the iPod is either playing or paused, you can view the
current track, album and playing time by selecting this item.
Music Menu
Music is categorised under Playlists, Artists, Albums, Songs,
Podcasts,Genres and Composers.
3Videos Menu
The Video menu will only appear if your iPod supports video
browsing.
Note: iPod touch does not support this feature.
Entering the Video menu will provide you with a list of
categories including, for example, Movies and Video
Podcasts. These categories are organised with iTunes.
To play a video item, use the Navigator keys to highlight your
selection, then press . Your video will start playing, and will
appear on your television.
To stop playback, simply press the button. This will take
you back to the previous menu.
If you do not see a picture, please consult the troubleshooting
guide.
Settings Menu
The iD50 can be configured in a number of different ways to
allow control of video settings, audio playback modes and
charging.
Cambridge Audio
Cambridge Audio
Music
Music
Videos
Videos
Settings
Settings
Shuffle Songs
Shuffle Songs
Now Playing
Now Playing
Videos
Videos
Movies
Movies
Music Videos
Music Videos
TV Shows
TV Shows
Video Podcasts
Video Podcasts
Rentals
Rentals
Music
Music
Playlists
Playlists
Artists
Artists
Albums
Albums
Songs
Songs
Podcasts
Podcasts
Genres
Genres
Composers
Composers
Settings
Settings
Shuffle: Off
Shuffle: Off
Repeat: Off
Repeat: Off
Charging: Off
Charging: Off
Video Auto-Fit: On
Video Auto-Fit: On
Widescreen: On
Widescreen: On
Language: English
Language: English
6
5
4
10
THD < 0.005% @ 1kHz
S/N < -75dB @ 1kHz
Output level 1.7-2.0V rms nominal
Standby power <1.3W idle
consumption
Maximum power 2.5W in operation and charging
consumption at maximum rate
Inputs/Outputs
Power adaptor input 100-240V ~ 50/60Hz
Power adaptor output 7.5V DC, 500 mA
Composite video output x 1
S-Video out x 1
RS232 x 1
Tip: TX from dock, Ring: RX to
dock, Screen: Ground
9600 BAUD, No check bit,
1 Stop Bit, No RTS/CTS or
XON/XOFF required
See website for command
protocol.
Remote control
Battery Coin Cell type: V3, CR2032 or
equivalent
Technical specifications
Operating instructions (continued)
Shuffle Mode
Selecting this item allows you to choose any of the following:
Shuffle Tracks (standard shuffle mode – plays songs in the
current selection in a random order);
Shuffle Albums (after the current album playing has finished,
a random album will be selected and playback will resume);
Shuffle Off (your music selection will play in order).
Repeat Mode
Repeat Tracks (plays each song in the current selection,
then starts again);
Repeat One Track (repeatedly plays the selected song);
Repeat Off (no songs are repeated).
Charging
The iD50 docking station also charges the iPod battery while
it is in the dock. However, the iPod’s battery charging circuit
can introduce a little noise to the audio and video outputs.
By switching the charging off, the listener is provided with
the best possible listening experience.
Note: if the battery is completely flat, the iPod may not
respond for a short while.
For more information on battery recharging, please consult
your iPod manual.
Video Auto Fit
When this option is selected, the iPod attempts to enlarge
the video image to fill the screen so that the top and bottom
or left and right edges end at the screen edge without losing
any vertical or horizontal image information.
Depending on the iPod media and aspect ratio of the screen
as selected below, this may still result in adding either
letterbox black bars at the top and bottom of the screen or
pillarbox black bars at the left and right of the screen.
Widescreen Mode
Use this mode when your video monitor/TV has a horizontal-
to-vertical aspect ratio of 16:9 (widescreen) rather than 4:3
(normal). This setting tells the iPod that your TV is widescreen
so that it can make the best choice of video mode.
Depending on the media source format and this screen
configuration preference, the media content may be
displayed in full widescreen fitting the screen, or have
pillarbox bars as described above.
Language Settings
Use to select between various different languages for the
iD50’s On-Screen Display.
11
iD50
ENGLISH
There is no video on the TV
Check if the iD50 is in Advanced Mode.
Check if your iPod is correctly docked in the iD50.
Check if your iPod is playing a video rather than an audio track.
Check if your TV/receiver is turned on and that the right
input source and type (composite or S-video) is selected.
Check if the video cable and DC adaptor are firmly and
correctly connected.
The iD50 supports both PAL and NTSC standards and will
have been preset for the TV system in your area. However, if
there is no picture, check that the PAL/NTSC setting is
correct (see the Advanced Mode operation section in this
manual).
There is no sound from my Stereo system
Check if your iPod is correctly docked in the iD50.
Check if your iPod is playing.
Check if your TV/receiver is turned on, the right input source
is selected and the volume is turned up.
Check if the video and audio cables and DC adaptor are
firmly and correctly connected.
The docking station does not charge the iPod’s
battery
Check charging is enabled in the On Screen Display.
Check if your iPod is correctly docked in the iD50.
Check the AC/DC power adaptor is firmly plugged into the
dock and the mains power socket outlet.
The remote control does not function
For the remote control to work as intended with your iPod,
the iPod must be running the most updated Apple software.
If you need to upgrade, simply visit the Apple iPod website
and follow the instructions there for a free download. Go to:
http://www.apple.com/iPod/download/
If it still does not work, please unplug the power cable for
one minute, then plug it back in (this resets the system).
Check if your iPod is correctly docked in the iD50.
Try the remote from different locations and see if it works.
Strong fluorescent lighting or other room conditions may
cause the problem. Make sure nothing blocks the infra-red
(IR) signal path between the remote and the iD50.
Check that the remote control’s battery is correctly inserted
and has not expired.
Troubleshooting
For more frequently asked questions (FAQs), technical advice
and information on getting the most out of your iD50, please
visit the Support section on Cambridge Audio’s website:
www.cambridgeaudio.com/support.php
For all servicing, in or out of warranty, please contact your
dealer.
Cambridge Audio is a brand of Audio Partnership Plc
Registered Office: Gallery Court, Hankey Place,
London SE1 4BB, United Kingdom
Registered in England No. 2953313
www.cambridge-audio.com
AP21793/2
© 2008 Cambridge Audio Ltd
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Cambridge Audio iD50 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Cambridge Audio iD50 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,46 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Cambridge Audio iD50

Cambridge Audio iD50 Gebruiksaanwijzing - Nederlands - 12 pagina's

Cambridge Audio iD50 Gebruiksaanwijzing - Deutsch - 12 pagina's

Cambridge Audio iD50 Gebruiksaanwijzing - Français - 12 pagina's

Cambridge Audio iD50 Gebruiksaanwijzing - Italiano - 12 pagina's

Cambridge Audio iD50 Gebruiksaanwijzing - Espanõl - 12 pagina's

Cambridge Audio iD50 Gebruiksaanwijzing - Dansk - 12 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info