8 azur DAB/FM tuner
OPERATING INSTRUCTIONS
Tuning aand llistening tto tthe 6640T
Press the Standby/On button on the front panel.
For DAB stations, select DAB mode using the DAB/FM button.
Press the Autotune button. The 640T will search for all available DAB
stations and display them in alphabetical order on the display.
Press the Step buttons to scroll through the list.
Press the Select button to listen to your chosen station.
For FM stations, select FM mode using the DAB/FM button.
Press the Autotune button. The 640T will scan up through the FM band
and play the first station found (RDS may accompany a strong signal).
Press the Autotune button again to scan up to the next available station
(to scan down the FM band press and hold the Autotune button).
DAB Manual ffine ttune
Hold the select button down until "Manual Tune" appears on the display.
Frequency and name of the particular station will be displayed.
Use the Step buttons to adjust the frequency
Press Select again until DAB is displayed.
Setting PPresets
Select the station you wish to store and hold down the desired preset
number (e.g. 3) until the display shows that the station has been stored.
To store the presets 6-10 press the Shift button first. You can store 10
stations for both FM and DAB.
Press chosen Preset button at any time to listen to the corresponding
station
DAB SSystem RReset
If the 640T is moved to another location where there are different
stations then the old stations should be removed from the memory.
To do a system reset unplug the 640T then hold down the Select button
whilst plugging back in.
Continue holding Select until "System Reset" appears on the display.
Alarm ffunction
The Alarm function will turn on the 640T at a chosen time.
Press Alarm on your remote handset. ‘Alarm’ and ‘Off’ will appear.
Press Select. ‘00:00’ will appear.
Press the < > keys to alter the time (‘Alarm Setting’ will be displayed).
Press Select again to set (press twice to turn off alarm function).
An asterisk will appear on the display when the 640T is in standby.
Sleep FFunction
The Sleep function will turn the 640T off after a set period.
Press the Alarm button twice when the unit is on.
Select number of minutes required (01 - 99).
Press Select again to activate.
It is necessary to reset the Sleep function before each use.
Natural CContour TTechnology
Experiment with the three available settings (switch on rear panel) to
achieve the optimum tone from your 640T.
