640T DAB/FM tuner
azur DAB/FM tuner 5
Please take a moment to read these notes before installing your Azur tuner, they
will enable you to get the best performance and prolong the life of the product. We
advise you follow all instructions, heed all warnings and keep the instructions for
future reference.
This unit must be installed on a sturdy, level surface. Since the power transformers
generate a magnetic hum-field of moderate strength, a turntable should not be
located nearby.
Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide blade or the third prong are
provided for your safety. If the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
The unit must be installed in manner that makes diconnection of mains plug from
the mains socket outlet (or appliance connector from the rear of the unit) possible.
Do not plug your 640T directly into a power amplifier unless it has a variable output
level.
Do not route the power cable so that it can be walked upon or damaged by other
items near it.
The unit requires ventilation. Do not situate it on a rug or other soft surface and do
not obstruct any air inlets or outlet grilles.
Do not place in a sealed area such as a bookcase or in a cabinet. Any space open
at the back (such as a dedicated equipment rack) is fine however.
Do not install near any heat sources auch as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that produce heat.
When using for the first time it is advisable that it is left on, playing music, for at
least 36 hours prior to critical listening. For subsequent use, a warm up period of
10-15 minutes is recommended for maximum enjoyment.
If you do not intend to use this unit for a long period, switch it to Standby and
unplug it from the mains socket. Also unplug the unit during lightning storms.
WARNING - To reduce the risk of fire or electric shock, do not expose this unit to
rain or moisture. This unit must not be exposed to dripping or splashing water or
other liquids. No objects filled with liquid, such as vases, shall be placed on the
unit. In the event of spillage, switch off immediately, disconnect from the mains
supply and contact your dealer for advice.
To clean the unit, wipe its case with a moist, lint-free cloth. Do not use any cleaning
fluids containing alcohol, ammonia or abrasives. Do not spray an aerosol at or near
your 640T.
Ensure that small objects do not fall through any ventilation grille. If this happens,
switch off immediately, disconnect from the mains supply and contact your dealer
for advice.
Refer all servicing to qualified service personnel. Servicing is required when the
unit has been damaged in any way, such as a damaged power-supply cord or plug,
liquid has been spilled or objects have fallen into the unit, the unit has been
exposed to rain or moisture, does not operate normally, or has been dropped.
If you have checked the Troubleshooting guide in the manual with no improvement,
do not attempt to repair, dissassemble or reconstruct the unit. A serious electric
shock could result if this precautionary measure is ignored.
IMPORTANT SAFETY INSTRUCTIONS
