FRONT PANEL CONTROLS
Standby/On
Switches the 340T between Standby and On. When in Standby the front
panel display shows the current time in hours and minutes, as well as
the date if RDS clock mode is enabled.
Presets
The 340T can store up to 20 Presets for each of the FM and AM bands.
The Shift button alternates the 5 buttons between accessing Presets
1-5 and 6-10. To access Presets 11-20, hold down the Shift button. The
display will show which choice has been made.
FM/AM
This button switches between the FM and AM bands.
Stereo/Mono
Press this button to alternate between Stereo and Mono mode when
listening to FM broadcasts.
Info
Allows the user to select and view different information on the display.
When listening to the FM band, the display modes are Radiotext, RDS
Program Type, Signal Strength, Time, Stereo/Mono mode, and Info Off.
In AM mode, the user can see the Signal Strength and Time. RDS
information on the FM band is dependant on signal strength.
Mode/Store
Press once to toggle the functionality of the |<< >>| buttons between
Scan and Preset modes. Press and hold the button to store the current
station (the display will show the next free preset number). Use the |<<
>>| buttons to increase/decrease the preset number, then press the
Mode/Store button to confirm the selection.
|<< >>|
Adjusts the tuner frequency when in Scan mode (the default setting).
Holding either button down will search for the next station. When in
Preset mode, the user can step through each of the stored Presets.
