Remote control
The Topaz SR10 is supplied with a remote control that operates this unit
and its built-in tuner. In addition, the buttons with Blue coloured icons can
operate a matching Topaz CD5 or CD10 player.
Always use Alkaline batteries.
CD5/CD10 (Blue coloured icons)
To operate the Topaz CD5 or CD10 players only. For more information refer
to the Topaz CD5 and CD10 user’s manual.
Mute
Mutes audio on the unit. Press again to cancel mute.
Speaker A/B
Toggles between the selected loudspeaker terminals: speaker A only,
speaker B only, speaker A and B together, or all speakers off.
Stereo/Mono
Used only when FM is selected. Toggles between FM stereo output and FM
mono output. For low quality stereo FM signals, selecting mono can
usually reduce the noise. Note: Some FM stations are mono only, and
selecting Stereo will have no affect on these.
Mode
Used for AM/FM mode. Press to cycle the tuning mode between Preset,
Auto, and Manual modes.
Volume
Increases or decreases the volume of the unit. Also used to change the
bass, treble and balance settings when these are selected.
Skip
Used when FM or AM is selected.
In Preset mode - Steps up or down through the user-stored presets.
In Auto mode - Search for the previous or next available station with a
strong signal.
In Manual mode - Adjusts the frequency in steps, for fine tuning.
Menu
Toggles between Bass, Treble and Balance options. Use the volume
buttons to change the level of the selected option.
Preset buttons (1/5, 2/6, 3/7, 4/8)
Used when FM or AM is selected. These select user-stored station presets.
Pressing a preset button once will select one of the first 4 presets, then
pressing the same preset button again will toggle to the next preset. 8
presets are available directly from the remote, further presets can be
selected in Preset mode, by using the Skip/Scan buttons.
Source buttons (CD, FM, AM, BD/DVD, MP3/Aux, Phono)
Press the relevant button to select the desired music source.
