AUDIO CONNECTIONS
PS10 power supply to AH10
For each AH10 with up to four main zones connected (and no sub-
zones) one PS10 is required.
Sub-zones require a separate PS10 power supply.
For each AH10 (with both main and sub-zones connected) two x
PS10 power supplies are required.
AH10 to KP10
Using a single Cat-5e cable, connect each KP10 to the AH10 via an
RJ45 plug using the EIA/TIA 568A wiring standard (see below) at the
AH10, and an eight-way colour-coded connection at the keypad.
The Cat-5 connection from AH10 to KP10 should not exceed 30m/ 100 ft.
Sub-zones connections are made in the same way as main zone
connections but from the sub-zone sockets (see illustration on page 9).
KP10 to SS10 or other loudspeakers
Connect the KP10 to a pair of speakers with two runs of standard
high-quality speaker cable.
Connections for one AH10 with two main zones attached
4 – blue
5 – white/blue
6 – orange
7 – white/brown
8 – brown
3 – white/orange
2 – green
1 – white/green
Speaker cable
Speaker cable
