19
ENGLISH
Setting the sleep time
The Sleep function will turn off the unit after a selected interval. To set the sleep time:
1. Press Sleep button on the remote. Choose between 15mins, 30mins, 45mins,
60mins, 90mins and Off by pressing Sleep button accordingly to your chosen time.
Off means the sleep timer is disabled.
2. Press Enter button to accept and return to previous state.
Playing CDs
One supports standard audio CDs and CD-R/CD-RWs with MP3/WMA music files.
Normal disc play
1. Select CD mode or load the disc into the CD slot. Once the disc is loaded, the source
will automatically switch to CD mode.
2. Press button to begin playback. The disc will start playing from the beginning of the
first track. When the last track has finished playing, the unit will go to Standby mode.
3. To stop the disc at any point, press the button. Pressing the button while the
disc is playing will pause the disc. When the disc is paused the display will flash, play
can be resumed by pressing the button again.
4. To eject disc, press the button.
Note: The unit must be in CD source mode for the disc to eject.
Locating a specific track
1. Ensure that a disc is loaded.
2. Pressing the right button once will forward CD by one track. Repeat as necessary.
3. Press . The disc will play to the end of the disc and then return to 'Standby' mode.
4. Pressing the left button will access the previous track.
Locating a particular point in a track
1. Ensure that the disc is playing the desired track.
2. Press and hold or , the CD will then fast foward or rewind within the track.
Audio is muted during searching.
3. Release the button when the desired time has been reached. Play will resume.
Playing MP3/WMA from USB, SD or CD
Plug the USB device into the USB port, insert the memory card into SD card slot located
on the front panel or insert CD to cd slot, select the desired source using the Source
button. The unit will automatically read the contents before it can be played.
Compatible bitrates
MP3 - 96, 128, 192, 256 and 320 kbps.
WMA - 48, 64, 96, 128, 160 and 192 kbps.
Note:
–One is not compatible with the Windows Media Audio lossless file format.
–USB device and SD card should be in FAT (e.g. FAT16, FAT32) format.
1. Press the button to start playing from the beginning of the album/folder.
2. Use the buttons to select the desired album file (USB/SD source only). Press
the button to start playback.
3. Press the buttons to skip between tracks.
4 When listening to a CD, pressing and holding down the or buttons will fast
forward or rewind the current track. Audio is muted during scanning.
Note: The scan function is not available in USB and SD mode.
