497422
20
Verklein
Vergroot
Pagina terug
1/134
Pagina verder
20
T
o transport your steam generator using the handle of the iron :
- place the ironin positionon the housingplate onthesteam generator and fold the ringover the
iron until it locks into position (you will hear a “click”) - fig.2.
-
Hold the iron by the handle to transport your steam generator - fig.1.
What water may be used ?
Your iron has been designed to operate using untreated tap water.
Heat concentrates the elements contained in water during evaporation. The types of water
listed below contain organic waste or mineral elements thatcan cause spitting, brownstaining
or premature wear of the appliance: water from clothes dryers, scented or softened water,
water from refrigerators, batteries or air conditioners, pure distilled or demineralised water or
rain water should not be used in your iron. Also do not use boiled, filtered or bottled water.
I
f your water is very hard(check
with your local water authority)
it is possibleto mix untreated
t
ap water with store-bought
distilled ordemineralised water
in the following proportions:
50% untreatedtap water,50%
distilled ordemineralised water.
Preparation
Filling the water tank
• Place the steam generator on a stable, horizontal and heat-resistant surface.
• Ensure that your steam generator is unplugged and that the soleplate and the iron rest have
cooled down.
• Open the water tank filler cover - fig.4.
• Pour in untreated tap water up to the max mark - fig.5.
• Close the water tank filler cover.
Your iron is equipped with an extension cord system to prevent the cord from dragging over
the laundry and creasing it again when ironing.
Take the steam cord out of its housing and unwind it completely.
Remove the tie to release the cord outlet.
Press the Eject button - fig.6 and the Easycord system extends automatically.
When the cord outlet tips, the Easycord system extends automatically without you having to
press the Eject button.
Using the Easycord system
Operating the control panel
Green light flashes: the boiler heats up. - fig.7.
Green light on: the steam is ready - fig.7.
Red light water tank” on: the water tank is empty - fig.10.
The orange “anti-calc” indicator flashes - fig.12: you need to rinse the scale collector.
Switch on the steam generator
Completely unwind the power cord and the steam cord from its storage space.
Lower the retaining hoop (depending on model) to unlock the safety catch - fig.3.
Plug your steam generator into a mains socket with an earth pin”.
Press on the on / off switch. The green light (located on the control panel) flashes and the
boiler heats up - fig.7.
When the green “steam ready” light stops flashing (after 2 minutes approximately), the
appliance is ready.
The first time the appliance is
used, there may be some
fumes and smell but this is
not harmful. They will not
affect use and will disappear
rapidly.
Steam ironing
Placetheiron'stemperaturecontrolslideaccordingtothetypeoffabrictobeironed (seetablebelow).
The thermostat light comes on. Be careful ! The steam generator is ready when the thermostat
light goes out and when the green “steam ready” light stays on.
Adjust the steam output control dial (located on the control panel).
While ironing, the light on top of the iron and the steam ready light turn on and off, as the
temperature adjusts without interrupting ironing.
To obtain steam, press on the steam control button under the iron handle and keep it pressed -
fig.8. The steam will stop when you release the button.
When starting, and regularly while it is being used, your steam generator's electric pump injects
waterinto the boiler. It makes a noise but this is quite normal. You may also heara clicking noise
which is the steam valve opening. Again this is normal.
Always spray starch onto the reverse side of the fabric to be ironed.
Use
Do not place the iron on a
metal support.When
taking a break from
ironing, always place
the iron on the iron rest
plate of the unit. It is
equipped with non-slip
pads and has been
designed to withstand
high temperatures.
Always use the Easycord
system for enhanced
comfort of use.
Ironing Boards:
D
ue to the powerful steam
output, a mesh type ironing
board must be used to allow
a
ny excess steam to escape
and to avoid steam venting.
1800115593 TEFAL ExpressAnticalc:1800115593 5/02/09 11:36 Page 20
20

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Calor-GV-7460

Zoeken resetten

  • bij het strijken komt er bij de stoom ook water mee
    wat zou dat kunnen zijn één lek???? Gesteld op 15-4-2015 om 20:48

    Reageer op deze vraag Misbruik melden
    • Bij mij ook omdat het strijkijzer niet warm genoeg is.
      Waarom duurt het langer voordat het strijkijzer warm is?
      thermostaat lijkt me ok want het lampje gaat aan en uit alleen is
      de opwarmtijd veel langer dan ervoor.
      antwoord naar guido.berrevoets1@telenet.be Dank Jullie Geantwoord op 4-6-2017 om 09:47

      Waardeer dit antwoord (3) Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Calor GV 7460 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Calor GV 7460 in de taal/talen: Alle talen als bijlage per email.

De handleiding is 3,16 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Calor GV 7460

Calor GV 7460 Gebruiksaanwijzing - Deutsch, Français - 1 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info