2.TA FUNCTION
By pressing TA button < 3 seconds, to switch on TA standby mode.The TA icon will light up on the LCD. In the stand by
mode, when a traffic announcement broadcast starts, the traffic announcement broadcast will be received as top priority
regardless of the function mode.When a traffic announcement starts, “TRAFFIC INFO” will show on the LCD, press the TA
button can cancelled the broadcast reception while a traffic announcement broadcast is being received.The unit will go back
to the previous mode and TA goes into stand by mode again.When the TP icon is not light up for 60 seconds.A beep Alarm
tone is heard and the LCD will show “Lost TP,TA”.TA seek will automatic activate and searches to another TA station.
3. PTY FUNCTION
Pressing PTY(TA) button more than 3 seconds to go into PTY select mode.The user now has 5 seconds to select the
desired PTY item by using encoder volume knob. Once selected the PTY item, user have 5 seconds to press
AUDIO/CENTER” or “TUNE UP (>>)or TUNE DOWN” (<<) buttons < 3 seconds to seek for the selected PTY item.
The LCD will display “PTY SEEK”. If no station with the selected PTY broadcast can be received, the LCD will display
“No Match PTY” for 5 seconds then returns to the previous mode.
User can store his favorite PTY into the preset memory M1 to M6. After selected a PTY item, long press any one of the
preset memory button can store the selected PTY.To recall the stored PTY item switch on PTY mode then press
preset memory < 3 seconds, the unit will automatically search the stored PTY station in the preset memory
Factory default stored for PTY preset memory:
M1/News, M2/Information, M3/Pop Music, M4/Sports, M5/Classics, M6/Finance.
CD OPERATION
AUDIO CD OPERATION - TFT MONITOR
When a Audio CD is inserted into the player and the following picture will appear on the TFT monitor.
ENGLISH
14
TREBLE
TREBLE (LEVEL)
User has 5 seconds to use the encoder volume knob to adjust the desired Treble level range from -6 to +6.
TREBLE CFQ (FREQ)
User has 5 seconds to use the encoder volume knob to adjust the desired Treble center frequency to 10KHz, 12.5KHz,
15KHz, or 17.5KHz.
BALANCE
User has 5 seconds to use the encoder volume knob to adjust the Balance between the right and left speakers from
R12 (full right) to L12 (full left).“C00” represents an equal balance between the right and left speakers.
FADER
User has 5 seconds to use encoder volume knob to adjust the Fader between the front and rear speakers from R12
(full rear) to F12 (full front).“C00” represents an equal balance between the front and rear speakers.
TUNER OPERATION
19)BAND BUTTON (BAND)
Press BAND to change between FM bands and AM(MW) bands.
20&21)TUNING UP/DOWN BUTTON ( / )
MANUAL TUNING
Press the Up Tuning( ) or Down Tuning ( )button for more than 3 seconds to move the radio frequency number
up or down by one step.
AUTO SEEK TUNING
Press the Up Tuning ( )or Down Tuning ( )button for less than 3 seconds to move to next station automatically.
12~17)PRESET STATIONS BUTTONS
Six numbered preset buttons store and recall stations for each band.
11)AUTOMATICALLY STORE / PRESET SCAN (AS/PS)
Automatically select 6 strong stations and store them in the current band. Select a band (if needed). Press AS/PS button
for more than three seconds.The new stations replace stations already stored in that band.
PRESET SCAN
Scan stations stored in the current band. Select a band (if needed). Press AS/PS button for less than 3 seconds.The unit will
pause for ten seconds at each preset station. Press AS/PS button again to stop scanning when the desired station is reached.
STEREO
The unit will automatically pick up a stereo signal when available.When in stereo mode, the ST icon appears in the display.
When no stereo signal is available, the unit will automatically revert to mono operation, and no icon will be displayed.
RDS OPERATION
RDS FUNCTIONS
The unit is equipped with the following RDS function:
- AF Alternative Frequencies
- CT Clock Time
- EON Enchanced other Network
- PI Program identifications
- PS Program service name
- PTY Program Type
- REG Regional Change
- TA Traffic Announcement
- TP Traffic program
1.AF FUNCTION
By pressing AF button < 3 seconds to select AF ON/OFF.‘AF’ icon will light up on the LCD. Under AF “On” mode, if the
tuned in station signal is getting weak, the unit will automatically switches to a different frequency on the same network with
stronger signal.
Factory Default setting is “AF ON”
15
