168625
12
Verklein
Vergroot
Pagina terug
1/28
Pagina verder
Auto store / Preset scan
- Preset scan:
AS/PS
AS/PS
- Auto store:
AS/PS
.
Press the button to scan each
preset station. It will play a station for a
few seconds, then go to next station until
all 6 stations are scanned, finally the
radio will play at the preset station where
scanning started. The preset station
number on the LCD will flash during the
process. When you hear a station that
you wish to listen to, press the
again to stop the preset scanning.
Press and hold the button for
more than 2 seconds to start auto store.
The radio will scan from the lowest
frequency, and automatically store the 6
strongest stations into the preset
memories. When auto store is complete,
the radio will start preset scan to the
stored 6 station
RDS (Radio Data System) Operations
Setting RDS mode
Briefly press the button to turn
the RDS mode on/off.
Whenever RDS is on, symbol
appears on the TFT screen.
Program name is displayed when
receiving an RDS station.
starts blinking if the broadcasting
signals getting worse. will be
displayed when an emergency
broadcasting is received, meanwhile
sound output level will be automatcially
adjusted to the preset output level when
the volume level is set at minimum.
segment
AF/REG
AF
AF
ALARM
AF( alternative frequency) function
Press button short to switch AF
mode on or off. There are 3 state of the
AF on the LCD display:
AF switching mode
off.
AF switching mode
on, and has RDS information.
AF switching
mode is on, but RDS information is not
received yet.
AF/REG
“”
Segment “AF” off:
Segment “AF” on:
Segment “AF” flashing:
When AF switching mode is selected, the
radio checks the signal strength of the AF
all the time. The interval of checking time
of each AFs depends on the signal
strength of current station, from a few
minute for strong station to few seconds
for weak station. Every time that new AF
is stronger than current station, it
switches over to that frequency for very
short time. Because the mute time of AF
switching or checking time is very short,
it is almost inaudible in case of normal
program. During FM mode, when AF is
on, manual store, Auto store/preset scan
function can only receive and save RDS
program.
Press and hold the button for 2
seconds to switch on or off region mode.
Some broadcasting stations change their
program from normal broadcasting to
regional broadcasting for a certain time
period.
When region is on, the current listening
program remains unchanged. When
region is off, it allows the reception
moved to the regional station.
REG(Regional Program) function
AF/REG
TA(Traffic Announcement) Function
Briefly press the button to turn
search mode on or off.
When search mode is on and a traffic
announcement is transmitted:
- Switch to the traffic announcement
mode from any audio mode including
DVD(CD/MPEG4/MP3), USB/SD/MMC or
AV IN.
- Switch on the traffic announcement
automatically when the receiver is in a
waiting reception mode and the audio
signal is muted.
- When the traffic announcement is
over, the initial operation mode will be
restored.
- If the volume level was under the
threshold point it will be raised to the
threshold point.
- When mode is on, segment is
turned on.
- When a TP station is
received,segment “TP” is turned on.
TA TA
TA
,
TA TA
12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Caliber mcd 782 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Caliber mcd 782 in de taal/talen: Nederlands, Engels als bijlage per email.

De handleiding is 2,03 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Caliber mcd 782

Caliber mcd 782 Snelstart handleiding - Nederlands, Deutsch, English, Français, Italiano, Português, Espanõl, Polski, Svenska - 6 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info